OpenCloudOS-Kernel/drivers/scsi/qla2xxx/qla_inline.h

435 lines
9.6 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*/
#include "qla_target.h"
/**
* qla24xx_calc_iocbs() - Determine number of Command Type 3 and
* Continuation Type 1 IOCBs to allocate.
*
* @vha: HA context
* @dsds: number of data segment descriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
static inline uint16_t
qla24xx_calc_iocbs(scsi_qla_host_t *vha, uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 1) {
iocbs += (dsds - 1) / 5;
if ((dsds - 1) % 5)
iocbs++;
}
return iocbs;
}
/*
* qla2x00_debounce_register
* Debounce register.
*
* Input:
* port = register address.
*
* Returns:
* register value.
*/
static __inline__ uint16_t
qla2x00_debounce_register(volatile __le16 __iomem *addr)
{
volatile uint16_t first;
volatile uint16_t second;
do {
first = rd_reg_word(addr);
barrier();
cpu_relax();
second = rd_reg_word(addr);
} while (first != second);
return (first);
}
static inline void
qla2x00_poll(struct rsp_que *rsp)
{
struct qla_hw_data *ha = rsp->hw;
if (IS_P3P_TYPE(ha))
qla82xx_poll(0, rsp);
else
ha->isp_ops->intr_handler(0, rsp);
}
static inline uint8_t *
host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
{
uint32_t *ifcp = (uint32_t *) fcp;
uint32_t *ofcp = (uint32_t *) fcp;
uint32_t iter = bsize >> 2;
for (; iter ; iter--)
*ofcp++ = swab32(*ifcp++);
return fcp;
}
static inline void
host_to_adap(uint8_t *src, uint8_t *dst, uint32_t bsize)
{
uint32_t *isrc = (uint32_t *) src;
__le32 *odest = (__le32 *) dst;
uint32_t iter = bsize >> 2;
for ( ; iter--; isrc++)
*odest++ = cpu_to_le32(*isrc);
}
static inline void
qla2x00_clean_dsd_pool(struct qla_hw_data *ha, struct crc_context *ctx)
{
struct dsd_dma *dsd, *tdsd;
/* clean up allocated prev pool */
list_for_each_entry_safe(dsd, tdsd, &ctx->dsd_list, list) {
dma_pool_free(ha->dl_dma_pool, dsd->dsd_addr,
dsd->dsd_list_dma);
list_del(&dsd->list);
kfree(dsd);
}
INIT_LIST_HEAD(&ctx->dsd_list);
}
static inline void
qla2x00_set_fcport_disc_state(fc_port_t *fcport, int state)
{
int old_val;
uint8_t shiftbits, mask;
/* This will have to change when the max no. of states > 16 */
shiftbits = 4;
mask = (1 << shiftbits) - 1;
fcport->disc_state = state;
while (1) {
old_val = atomic_read(&fcport->shadow_disc_state);
if (old_val == atomic_cmpxchg(&fcport->shadow_disc_state,
old_val, (old_val << shiftbits) | state)) {
ql_dbg(ql_dbg_disc, fcport->vha, 0x2134,
"FCPort %8phC disc_state transition: %s to %s - portid=%06x.\n",
fcport->port_name, port_dstate_str[old_val & mask],
port_dstate_str[state], fcport->d_id.b24);
return;
}
}
}
static inline int
qla2x00_hba_err_chk_enabled(srb_t *sp)
{
/*
* Uncomment when corresponding SCSI changes are done.
*
if (!sp->cmd->prot_chk)
return 0;
*
*/
switch (scsi_get_prot_op(GET_CMD_SP(sp))) {
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
if (ql2xenablehba_err_chk >= 1)
return 1;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
if (ql2xenablehba_err_chk >= 2)
return 1;
break;
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
return 1;
}
return 0;
}
static inline int
qla2x00_reset_active(scsi_qla_host_t *vha)
{
scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
/* Test appropriate base-vha and vha flags. */
return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
}
static inline int
qla2x00_chip_is_down(scsi_qla_host_t *vha)
{
return (qla2x00_reset_active(vha) || !vha->hw->flags.fw_started);
}
static void qla2xxx_init_sp(srb_t *sp, scsi_qla_host_t *vha,
struct qla_qpair *qpair, fc_port_t *fcport)
{
memset(sp, 0, sizeof(*sp));
sp->fcport = fcport;
sp->iocbs = 1;
sp->vha = vha;
sp->qpair = qpair;
sp->cmd_type = TYPE_SRB;
INIT_LIST_HEAD(&sp->elem);
}
static inline srb_t *
qla2xxx_get_qpair_sp(scsi_qla_host_t *vha, struct qla_qpair *qpair,
fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
uint8_t bail;
QLA_QPAIR_MARK_BUSY(qpair, bail);
if (unlikely(bail))
return NULL;
sp = mempool_alloc(qpair->srb_mempool, flag);
if (sp)
qla2xxx_init_sp(sp, vha, qpair, fcport);
else
QLA_QPAIR_MARK_NOT_BUSY(qpair);
return sp;
}
void qla2xxx_rel_done_warning(srb_t *sp, int res);
void qla2xxx_rel_free_warning(srb_t *sp);
static inline void
qla2xxx_rel_qpair_sp(struct qla_qpair *qpair, srb_t *sp)
{
sp->qpair = NULL;
sp->done = qla2xxx_rel_done_warning;
sp->free = qla2xxx_rel_free_warning;
mempool_free(sp, qpair->srb_mempool);
QLA_QPAIR_MARK_NOT_BUSY(qpair);
}
static inline srb_t *
qla2x00_get_sp(scsi_qla_host_t *vha, fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
uint8_t bail;
struct qla_qpair *qpair;
QLA_VHA_MARK_BUSY(vha, bail);
if (unlikely(bail))
return NULL;
qpair = vha->hw->base_qpair;
sp = qla2xxx_get_qpair_sp(vha, qpair, fcport, flag);
if (!sp)
goto done;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
sp->vha = vha;
done:
if (!sp)
QLA_VHA_MARK_NOT_BUSY(vha);
return sp;
}
static inline void
qla2x00_rel_sp(srb_t *sp)
{
QLA_VHA_MARK_NOT_BUSY(sp->vha);
qla2xxx_rel_qpair_sp(sp->qpair, sp);
}
static inline int
qla2x00_gid_list_size(struct qla_hw_data *ha)
{
if (IS_QLAFX00(ha))
return sizeof(uint32_t) * 32;
else
return sizeof(struct gid_list_info) * ha->max_fibre_devices;
}
static inline void
qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int status)
{
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
}
static inline void
qla2x00_set_retry_delay_timestamp(fc_port_t *fcport, uint16_t sts_qual)
{
u8 scope;
u16 qual;
#define SQ_SCOPE_MASK 0xc000 /* SAM-6 rev5 5.3.2 */
#define SQ_SCOPE_SHIFT 14
#define SQ_QUAL_MASK 0x3fff
#define SQ_MAX_WAIT_SEC 60 /* Max I/O hold off time in seconds. */
#define SQ_MAX_WAIT_TIME (SQ_MAX_WAIT_SEC * 10) /* in 100ms. */
if (!sts_qual) /* Common case. */
return;
scope = (sts_qual & SQ_SCOPE_MASK) >> SQ_SCOPE_SHIFT;
/* Handle only scope 1 or 2, which is for I-T nexus. */
if (scope != 1 && scope != 2)
return;
/* Skip processing, if retry delay timer is already in effect. */
if (fcport->retry_delay_timestamp &&
time_before(jiffies, fcport->retry_delay_timestamp))
return;
qual = sts_qual & SQ_QUAL_MASK;
if (qual < 1 || qual > 0x3fef)
return;
qual = min(qual, (u16)SQ_MAX_WAIT_TIME);
/* qual is expressed in 100ms increments. */
fcport->retry_delay_timestamp = jiffies + (qual * HZ / 10);
ql_log(ql_log_warn, fcport->vha, 0x5101,
"%8phC: I/O throttling requested (status qualifier = %04xh), holding off I/Os for %ums.\n",
fcport->port_name, sts_qual, qual * 100);
}
static inline bool
qla_is_exch_offld_enabled(struct scsi_qla_host *vha)
{
if (qla_ini_mode_enabled(vha) &&
(vha->ql2xiniexchg > FW_DEF_EXCHANGES_CNT))
return true;
else if (qla_tgt_mode_enabled(vha) &&
(vha->ql2xexchoffld > FW_DEF_EXCHANGES_CNT))
return true;
else if (qla_dual_mode_enabled(vha) &&
((vha->ql2xiniexchg + vha->ql2xexchoffld) > FW_DEF_EXCHANGES_CNT))
return true;
else
return false;
}
static inline void
qla_cpu_update(struct qla_qpair *qpair, uint16_t cpuid)
{
qpair->cpuid = cpuid;
if (!list_empty(&qpair->hints_list)) {
struct qla_qpair_hint *h;
list_for_each_entry(h, &qpair->hints_list, hint_elem)
h->cpuid = qpair->cpuid;
}
}
static inline struct qla_qpair_hint *
qla_qpair_to_hint(struct qla_tgt *tgt, struct qla_qpair *qpair)
{
struct qla_qpair_hint *h;
u16 i;
for (i = 0; i < tgt->ha->max_qpairs + 1; i++) {
h = &tgt->qphints[i];
if (h->qpair == qpair)
return h;
}
return NULL;
}
static inline void
qla_83xx_start_iocbs(struct qla_qpair *qpair)
{
struct req_que *req = qpair->req;
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
wrt_reg_dword(req->req_q_in, req->ring_index);
}
static inline int
qla2xxx_get_fc4_priority(struct scsi_qla_host *vha)
{
uint32_t data;
data =
((uint8_t *)vha->hw->nvram)[NVRAM_DUAL_FCP_NVME_FLAG_OFFSET];
return (data >> 6) & BIT_0 ? FC4_PRIORITY_FCP : FC4_PRIORITY_NVME;
}
enum {
RESOURCE_NONE,
RESOURCE_INI,
};
static inline int
qla_get_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
{
u16 iocbs_used, i;
struct qla_hw_data *ha = qp->vha->hw;
if (!ql2xenforce_iocb_limit) {
iores->res_type = RESOURCE_NONE;
return 0;
}
if ((iores->iocb_cnt + qp->fwres.iocbs_used) < qp->fwres.iocbs_qp_limit) {
qp->fwres.iocbs_used += iores->iocb_cnt;
return 0;
} else {
/* no need to acquire qpair lock. It's just rough calculation */
iocbs_used = ha->base_qpair->fwres.iocbs_used;
for (i = 0; i < ha->max_qpairs; i++) {
if (ha->queue_pair_map[i])
iocbs_used += ha->queue_pair_map[i]->fwres.iocbs_used;
}
if ((iores->iocb_cnt + iocbs_used) < qp->fwres.iocbs_limit) {
qp->fwres.iocbs_used += iores->iocb_cnt;
return 0;
} else {
iores->res_type = RESOURCE_NONE;
return -ENOSPC;
}
}
}
static inline void
qla_put_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
{
switch (iores->res_type) {
case RESOURCE_NONE:
break;
default:
if (qp->fwres.iocbs_used >= iores->iocb_cnt) {
qp->fwres.iocbs_used -= iores->iocb_cnt;
} else {
// should not happen
qp->fwres.iocbs_used = 0;
}
break;
}
iores->res_type = RESOURCE_NONE;
}