UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/char/mwave/smapi.c

573 lines
19 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
*
* smapi.c -- SMAPI interface routines
*
*
* Written By: Mike Sullivan IBM Corporation
*
* Copyright (C) 1999 IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
*
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* 10/23/2000 - Alpha Release
* First release to the public
*/
#include <linux/kernel.h>
#include <linux/mc146818rtc.h> /* CMOS defines */
#include "smapi.h"
#include "mwavedd.h"
static unsigned short g_usSmapiPort = 0;
static int smapi_request(unsigned short inBX, unsigned short inCX,
unsigned short inDI, unsigned short inSI,
unsigned short *outAX, unsigned short *outBX,
unsigned short *outCX, unsigned short *outDX,
unsigned short *outDI, unsigned short *outSI)
{
unsigned short myoutAX = 2, *pmyoutAX = &myoutAX;
unsigned short myoutBX = 3, *pmyoutBX = &myoutBX;
unsigned short myoutCX = 4, *pmyoutCX = &myoutCX;
unsigned short myoutDX = 5, *pmyoutDX = &myoutDX;
unsigned short myoutDI = 6, *pmyoutDI = &myoutDI;
unsigned short myoutSI = 7, *pmyoutSI = &myoutSI;
unsigned short usSmapiOK = -EIO, *pusSmapiOK = &usSmapiOK;
unsigned int inBXCX = (inBX << 16) | inCX;
unsigned int inDISI = (inDI << 16) | inSI;
int retval = 0;
PRINTK_5(TRACE_SMAPI, "inBX %x inCX %x inDI %x inSI %x\n",
inBX, inCX, inDI, inSI);
__asm__ __volatile__("movw $0x5380,%%ax\n\t"
"movl %7,%%ebx\n\t"
"shrl $16, %%ebx\n\t"
"movw %7,%%cx\n\t"
"movl %8,%%edi\n\t"
"shrl $16,%%edi\n\t"
"movw %8,%%si\n\t"
"movw %9,%%dx\n\t"
"out %%al,%%dx\n\t"
"out %%al,$0x4F\n\t"
"cmpb $0x53,%%ah\n\t"
"je 2f\n\t"
"1:\n\t"
"orb %%ah,%%ah\n\t"
"jnz 2f\n\t"
"movw %%ax,%0\n\t"
"movw %%bx,%1\n\t"
"movw %%cx,%2\n\t"
"movw %%dx,%3\n\t"
"movw %%di,%4\n\t"
"movw %%si,%5\n\t"
"movw $1,%6\n\t"
"2:\n\t":"=m"(*(unsigned short *) pmyoutAX),
"=m"(*(unsigned short *) pmyoutBX),
"=m"(*(unsigned short *) pmyoutCX),
"=m"(*(unsigned short *) pmyoutDX),
"=m"(*(unsigned short *) pmyoutDI),
"=m"(*(unsigned short *) pmyoutSI),
"=m"(*(unsigned short *) pusSmapiOK)
:"m"(inBXCX), "m"(inDISI), "m"(g_usSmapiPort)
:"%eax", "%ebx", "%ecx", "%edx", "%edi",
"%esi");
PRINTK_8(TRACE_SMAPI,
"myoutAX %x myoutBX %x myoutCX %x myoutDX %x myoutDI %x myoutSI %x usSmapiOK %x\n",
myoutAX, myoutBX, myoutCX, myoutDX, myoutDI, myoutSI,
usSmapiOK);
*outAX = myoutAX;
*outBX = myoutBX;
*outCX = myoutCX;
*outDX = myoutDX;
*outDI = myoutDI;
*outSI = myoutSI;
retval = (usSmapiOK == 1) ? 0 : -EIO;
PRINTK_2(TRACE_SMAPI, "smapi::smapi_request exit retval %x\n", retval);
return retval;
}
int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
{
char/mwave: remove redundant initialization of variable bRC The variable bRC is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200611152708.927344-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-11 23:27:08 +08:00
int bRC;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
static const unsigned short ausDspBases[] = {
0x0030, 0x4E30, 0x8E30, 0xCE30,
0x0130, 0x0350, 0x0070, 0x0DB0 };
static const unsigned short ausUartBases[] = {
0x03F8, 0x02F8, 0x03E8, 0x02E8 };
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg entry\n");
bRC = smapi_request(0x1802, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) {
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Error: Could not get DSP Settings. Aborting.\n");
return bRC;
}
PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n");
pSettings->bDSPPresent = ((usBX & 0x0100) != 0);
pSettings->bDSPEnabled = ((usCX & 0x0001) != 0);
pSettings->usDspIRQ = usSI & 0x00FF;
pSettings->usDspDMA = (usSI & 0xFF00) >> 8;
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
if ((usDI & 0x00FF) < ARRAY_SIZE(ausDspBases)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pSettings->usDspBaseIO = ausDspBases[usDI & 0x00FF];
} else {
pSettings->usDspBaseIO = 0;
}
PRINTK_6(TRACE_SMAPI,
"smapi::smapi_query_DSP_cfg get DSP Settings bDSPPresent %x bDSPEnabled %x usDspIRQ %x usDspDMA %x usDspBaseIO %x\n",
pSettings->bDSPPresent, pSettings->bDSPEnabled,
pSettings->usDspIRQ, pSettings->usDspDMA,
pSettings->usDspBaseIO);
/* check for illegal values */
if ( pSettings->usDspBaseIO == 0 )
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP base I/O address is 0\n");
if ( pSettings->usDspIRQ == 0 )
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP IRQ line is 0\n");
bRC = smapi_request(0x1804, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) {
PRINTK_ERROR("smapi::smapi_query_DSP_cfg: Error: Could not get DSP modem settings. Aborting.\n");
return bRC;
}
PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n");
pSettings->bModemEnabled = ((usCX & 0x0001) != 0);
pSettings->usUartIRQ = usSI & 0x000F;
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
if (((usSI & 0xFF00) >> 8) < ARRAY_SIZE(ausUartBases)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8];
} else {
pSettings->usUartBaseIO = 0;
}
PRINTK_4(TRACE_SMAPI,
"smapi::smapi_query_DSP_cfg get DSP modem settings bModemEnabled %x usUartIRQ %x usUartBaseIO %x\n",
pSettings->bModemEnabled,
pSettings->usUartIRQ,
pSettings->usUartBaseIO);
/* check for illegal values */
if ( pSettings->usUartBaseIO == 0 )
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART base I/O address is 0\n");
if ( pSettings->usUartIRQ == 0 )
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART IRQ line is 0\n");
PRINTK_2(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg exit bRC %x\n", bRC);
return bRC;
}
int smapi_set_DSP_cfg(void)
{
int bRC = -EIO;
int i;
unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
static const unsigned short ausDspBases[] = {
0x0030, 0x4E30, 0x8E30, 0xCE30,
0x0130, 0x0350, 0x0070, 0x0DB0 };
static const unsigned short ausUartBases[] = {
0x03F8, 0x02F8, 0x03E8, 0x02E8 };
static const unsigned short ausDspIrqs[] = {
5, 7, 10, 11, 15 };
static const unsigned short ausUartIrqs[] = {
3, 4 };
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned short dspio_index = 0, uartio_index = 0;
PRINTK_5(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg entry mwave_3780i_irq %x mwave_3780i_io %x mwave_uart_irq %x mwave_uart_io %x\n",
mwave_3780i_irq, mwave_3780i_io, mwave_uart_irq, mwave_uart_io);
if (mwave_3780i_io) {
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
for (i = 0; i < ARRAY_SIZE(ausDspBases); i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (mwave_3780i_io == ausDspBases[i])
break;
}
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
if (i == ARRAY_SIZE(ausDspBases)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_io address %x. Aborting.\n", mwave_3780i_io);
return bRC;
}
dspio_index = i;
}
if (mwave_3780i_irq) {
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
for (i = 0; i < ARRAY_SIZE(ausDspIrqs); i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (mwave_3780i_irq == ausDspIrqs[i])
break;
}
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
if (i == ARRAY_SIZE(ausDspIrqs)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_irq %x. Aborting.\n", mwave_3780i_irq);
return bRC;
}
}
if (mwave_uart_io) {
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
for (i = 0; i < ARRAY_SIZE(ausUartBases); i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (mwave_uart_io == ausUartBases[i])
break;
}
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
if (i == ARRAY_SIZE(ausUartBases)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_io address %x. Aborting.\n", mwave_uart_io);
return bRC;
}
uartio_index = i;
}
if (mwave_uart_irq) {
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
for (i = 0; i < ARRAY_SIZE(ausUartIrqs); i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (mwave_uart_irq == ausUartIrqs[i])
break;
}
char/mwave: make some arrays static const to make object code smaller Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10 23:08:32 +08:00
if (i == ARRAY_SIZE(ausUartIrqs)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_irq %x. Aborting.\n", mwave_uart_irq);
return bRC;
}
}
if (mwave_uart_irq || mwave_uart_io) {
/* Check serial port A */
bRC = smapi_request(0x1402, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
/* bRC == 0 */
if (usBX & 0x0100) { /* serial port A is present */
if (usCX & 1) { /* serial port is enabled */
if ((usSI & 0xFF) == mwave_uart_irq) {
#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_ERROR(KERN_ERR_MWAVE
"smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
#else
PRINTK_3(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
#endif
#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_1(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg Disabling conflicting serial port\n");
bRC = smapi_request(0x1403, 0x0100, 0, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1402, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
#else
goto exit_conflict;
#endif
} else {
if ((usSI >> 8) == uartio_index) {
#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_ERROR(KERN_ERR_MWAVE
"smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
#else
PRINTK_3(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
#endif
#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_1(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg Disabling conflicting serial port A\n");
bRC = smapi_request (0x1403, 0x0100, 0, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request (0x1402, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
#else
goto exit_conflict;
#endif
}
}
}
}
/* Check serial port B */
bRC = smapi_request(0x1404, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
/* bRC == 0 */
if (usBX & 0x0100) { /* serial port B is present */
if (usCX & 1) { /* serial port is enabled */
if ((usSI & 0xFF) == mwave_uart_irq) {
#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_ERROR(KERN_ERR_MWAVE
"smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
#else
PRINTK_3(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
#endif
#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_1(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n");
bRC = smapi_request(0x1405, 0x0100, 0, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1404, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
#else
goto exit_conflict;
#endif
} else {
if ((usSI >> 8) == uartio_index) {
#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_ERROR(KERN_ERR_MWAVE
"smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
#else
PRINTK_3(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
#endif
#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_1 (TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n");
bRC = smapi_request (0x1405, 0x0100, 0, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request (0x1404, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
#else
goto exit_conflict;
#endif
}
}
}
}
/* Check IR port */
bRC = smapi_request(0x1700, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1704, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
/* bRC == 0 */
if ((usCX & 0xff) != 0xff) { /* IR port not disabled */
if ((usCX & 0xff) == mwave_uart_irq) {
#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_ERROR(KERN_ERR_MWAVE
"smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq);
#else
PRINTK_3(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq);
#endif
#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_1(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n");
bRC = smapi_request(0x1701, 0x0100, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1700, 0, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1704, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
#else
goto exit_conflict;
#endif
} else {
if ((usSI & 0xff) == uartio_index) {
#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_ERROR(KERN_ERR_MWAVE
"smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
#else
PRINTK_3(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
#endif
#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
PRINTK_1(TRACE_SMAPI,
"smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n");
bRC = smapi_request(0x1701, 0x0100, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1700, 0, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1704, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
#else
goto exit_conflict;
#endif
}
}
}
}
bRC = smapi_request(0x1802, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
if (mwave_3780i_io) {
usDI = dspio_index;
}
if (mwave_3780i_irq) {
usSI = (usSI & 0xff00) | mwave_3780i_irq;
}
bRC = smapi_request(0x1803, 0x0101, usDI, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1804, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
if (mwave_uart_io) {
usSI = (usSI & 0x00ff) | (uartio_index << 8);
}
if (mwave_uart_irq) {
usSI = (usSI & 0xff00) | mwave_uart_irq;
}
bRC = smapi_request(0x1805, 0x0101, 0, usSI,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1802, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
bRC = smapi_request(0x1804, 0x0000, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC) goto exit_smapi_request_error;
/* normal exit: */
PRINTK_1(TRACE_SMAPI, "smapi::smapi_set_DSP_cfg exit\n");
return 0;
exit_conflict:
/* Message has already been printed */
return -EIO;
exit_smapi_request_error:
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg exit on smapi_request error bRC %x\n", bRC);
return bRC;
}
char/mwave: remove custom BOOLEAN type The mwave driver has its own macros for the BOOLEAN type and the TRUE/FALSE values. This is redundant because the kernel already has bool/true/false, and it clashes with the ACPI headers that also define these types. The linux/acpi.h header is now included implicitly from mwave through the mc146818rtc.h header, as reported by Stephen Rothwell: In file included from drivers/char/mwave/smapi.c:51:0: drivers/char/mwave/smapi.h:52:0: warning: "TRUE" redefined #define TRUE 1 ^ In file included from include/acpi/acpi.h:58:0, from include/linux/acpi.h:33, from include/linux/mc146818rtc.h:21, from drivers/char/mwave/smapi.c:50: include/acpi/actypes.h:438:0: note: this is the location of the previous definition #define TRUE (1 == 1) ^ This removes the private types from mwave and uses the standard types instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: fd09cc80165c ("rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-27 18:04:18 +08:00
int smapi_set_DSP_power_state(bool bOn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
char/mwave: remove redundant initialization of variable bRC The variable bRC is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200611152708.927344-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-11 23:27:08 +08:00
int bRC;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
unsigned short usPowerFunction;
PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state entry bOn %x\n", bOn);
usPowerFunction = (bOn) ? 1 : 0;
bRC = smapi_request(0x4901, 0x0000, 0, usPowerFunction,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state exit bRC %x\n", bRC);
return bRC;
}
#if 0
static int SmapiQuerySystemID(void)
{
int bRC = -EIO;
unsigned short usAX = 0xffff, usBX = 0xffff, usCX = 0xffff,
usDX = 0xffff, usDI = 0xffff, usSI = 0xffff;
printk("smapi::SmapiQUerySystemID entry\n");
bRC = smapi_request(0x0000, 0, 0, 0,
&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
if (bRC == 0) {
printk("AX=%x, BX=%x, CX=%x, DX=%x, DI=%x, SI=%x\n",
usAX, usBX, usCX, usDX, usDI, usSI);
} else {
printk("smapi::SmapiQuerySystemID smapi_request error\n");
}
return bRC;
}
#endif /* 0 */
int smapi_init(void)
{
int retval = -EIO;
unsigned short usSmapiID = 0;
unsigned long flags;
PRINTK_1(TRACE_SMAPI, "smapi::smapi_init entry\n");
spin_lock_irqsave(&rtc_lock, flags);
usSmapiID = CMOS_READ(0x7C);
usSmapiID |= (CMOS_READ(0x7D) << 8);
spin_unlock_irqrestore(&rtc_lock, flags);
PRINTK_2(TRACE_SMAPI, "smapi::smapi_init usSmapiID %x\n", usSmapiID);
if (usSmapiID == 0x5349) {
spin_lock_irqsave(&rtc_lock, flags);
g_usSmapiPort = CMOS_READ(0x7E);
g_usSmapiPort |= (CMOS_READ(0x7F) << 8);
spin_unlock_irqrestore(&rtc_lock, flags);
if (g_usSmapiPort == 0) {
PRINTK_ERROR("smapi::smapi_init, ERROR unable to read from SMAPI port\n");
} else {
PRINTK_2(TRACE_SMAPI,
char/mwave: remove custom BOOLEAN type The mwave driver has its own macros for the BOOLEAN type and the TRUE/FALSE values. This is redundant because the kernel already has bool/true/false, and it clashes with the ACPI headers that also define these types. The linux/acpi.h header is now included implicitly from mwave through the mc146818rtc.h header, as reported by Stephen Rothwell: In file included from drivers/char/mwave/smapi.c:51:0: drivers/char/mwave/smapi.h:52:0: warning: "TRUE" redefined #define TRUE 1 ^ In file included from include/acpi/acpi.h:58:0, from include/linux/acpi.h:33, from include/linux/mc146818rtc.h:21, from drivers/char/mwave/smapi.c:50: include/acpi/actypes.h:438:0: note: this is the location of the previous definition #define TRUE (1 == 1) ^ This removes the private types from mwave and uses the standard types instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: fd09cc80165c ("rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-27 18:04:18 +08:00
"smapi::smapi_init, exit true g_usSmapiPort %x\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
g_usSmapiPort);
retval = 0;
//SmapiQuerySystemID();
}
} else {
PRINTK_ERROR("smapi::smapi_init, ERROR invalid usSmapiID\n");
retval = -ENXIO;
}
return retval;
}