2017-12-05 23:54:12 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* ALSA SoC Texas Instruments TAS6424 Quad-Channel Audio Amplifier
|
|
|
|
*
|
|
|
|
* Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
|
|
|
|
* Author: Andreas Dannenberg <dannenberg@ti.com>
|
|
|
|
* Andrew F. Davis <afd@ti.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/delay.h>
|
2018-04-27 21:55:47 +08:00
|
|
|
#include <linux/gpio/consumer.h>
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
#include <sound/pcm.h>
|
|
|
|
#include <sound/pcm_params.h>
|
|
|
|
#include <sound/soc.h>
|
|
|
|
#include <sound/soc-dapm.h>
|
|
|
|
#include <sound/tlv.h>
|
|
|
|
|
|
|
|
#include "tas6424.h"
|
|
|
|
|
|
|
|
/* Define how often to check (and clear) the fault status register (in ms) */
|
|
|
|
#define TAS6424_FAULT_CHECK_INTERVAL 200
|
|
|
|
|
|
|
|
static const char * const tas6424_supply_names[] = {
|
|
|
|
"dvdd", /* Digital power supply. Connect to 3.3-V supply. */
|
|
|
|
"vbat", /* Supply used for higher voltage analog circuits. */
|
|
|
|
"pvdd", /* Class-D amp output FETs supply. */
|
|
|
|
};
|
|
|
|
#define TAS6424_NUM_SUPPLIES ARRAY_SIZE(tas6424_supply_names)
|
|
|
|
|
|
|
|
struct tas6424_data {
|
|
|
|
struct device *dev;
|
|
|
|
struct regmap *regmap;
|
|
|
|
struct regulator_bulk_data supplies[TAS6424_NUM_SUPPLIES];
|
|
|
|
struct delayed_work fault_check_work;
|
|
|
|
unsigned int last_fault1;
|
|
|
|
unsigned int last_fault2;
|
|
|
|
unsigned int last_warn;
|
2018-04-27 21:55:47 +08:00
|
|
|
struct gpio_desc *standby_gpio;
|
2018-04-27 21:55:48 +08:00
|
|
|
struct gpio_desc *mute_gpio;
|
2017-12-05 23:54:12 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DAC digital volumes. From -103.5 to 24 dB in 0.5 dB steps. Note that
|
|
|
|
* setting the gain below -100 dB (register value <0x7) is effectively a MUTE
|
|
|
|
* as per device datasheet.
|
|
|
|
*/
|
|
|
|
static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0);
|
|
|
|
|
|
|
|
static const struct snd_kcontrol_new tas6424_snd_controls[] = {
|
|
|
|
SOC_SINGLE_TLV("Speaker Driver CH1 Playback Volume",
|
|
|
|
TAS6424_CH1_VOL_CTRL, 0, 0xff, 0, dac_tlv),
|
|
|
|
SOC_SINGLE_TLV("Speaker Driver CH2 Playback Volume",
|
|
|
|
TAS6424_CH2_VOL_CTRL, 0, 0xff, 0, dac_tlv),
|
|
|
|
SOC_SINGLE_TLV("Speaker Driver CH3 Playback Volume",
|
|
|
|
TAS6424_CH3_VOL_CTRL, 0, 0xff, 0, dac_tlv),
|
|
|
|
SOC_SINGLE_TLV("Speaker Driver CH4 Playback Volume",
|
|
|
|
TAS6424_CH4_VOL_CTRL, 0, 0xff, 0, dac_tlv),
|
2018-05-03 15:36:27 +08:00
|
|
|
SOC_SINGLE_STROBE("Auto Diagnostics Switch", TAS6424_DC_DIAG_CTRL1,
|
|
|
|
TAS6424_LDGBYPASS_SHIFT, 1),
|
2017-12-05 23:54:12 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static int tas6424_dac_event(struct snd_soc_dapm_widget *w,
|
|
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
|
|
struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_dbg(component->dev, "%s() event=0x%0x\n", __func__, event);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
if (event & SND_SOC_DAPM_POST_PMU) {
|
|
|
|
/* Observe codec shutdown-to-active time */
|
|
|
|
msleep(12);
|
|
|
|
|
|
|
|
/* Turn on TAS6424 periodic fault checking/handling */
|
|
|
|
tas6424->last_fault1 = 0;
|
|
|
|
tas6424->last_fault2 = 0;
|
|
|
|
tas6424->last_warn = 0;
|
|
|
|
schedule_delayed_work(&tas6424->fault_check_work,
|
|
|
|
msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL));
|
|
|
|
} else if (event & SND_SOC_DAPM_PRE_PMD) {
|
|
|
|
/* Disable TAS6424 periodic fault checking/handling */
|
|
|
|
cancel_delayed_work_sync(&tas6424->fault_check_work);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct snd_soc_dapm_widget tas6424_dapm_widgets[] = {
|
|
|
|
SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas6424_dac_event,
|
|
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_OUTPUT("OUT")
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct snd_soc_dapm_route tas6424_audio_map[] = {
|
|
|
|
{ "DAC", NULL, "DAC IN" },
|
|
|
|
{ "OUT", NULL, "DAC" },
|
|
|
|
};
|
|
|
|
|
|
|
|
static int tas6424_hw_params(struct snd_pcm_substream *substream,
|
|
|
|
struct snd_pcm_hw_params *params,
|
|
|
|
struct snd_soc_dai *dai)
|
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
struct snd_soc_component *component = dai->component;
|
2017-12-05 23:54:12 +08:00
|
|
|
unsigned int rate = params_rate(params);
|
|
|
|
unsigned int width = params_width(params);
|
|
|
|
u8 sap_ctrl = 0;
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_dbg(component->dev, "%s() rate=%u width=%u\n", __func__, rate, width);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
switch (rate) {
|
|
|
|
case 44100:
|
|
|
|
sap_ctrl |= TAS6424_SAP_RATE_44100;
|
|
|
|
break;
|
|
|
|
case 48000:
|
|
|
|
sap_ctrl |= TAS6424_SAP_RATE_48000;
|
|
|
|
break;
|
|
|
|
case 96000:
|
|
|
|
sap_ctrl |= TAS6424_SAP_RATE_96000;
|
|
|
|
break;
|
|
|
|
default:
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "unsupported sample rate: %u\n", rate);
|
2017-12-05 23:54:12 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (width) {
|
|
|
|
case 16:
|
|
|
|
sap_ctrl |= TAS6424_SAP_TDM_SLOT_SZ_16;
|
|
|
|
break;
|
|
|
|
case 24:
|
|
|
|
break;
|
|
|
|
default:
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "unsupported sample width: %u\n", width);
|
2017-12-05 23:54:12 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
snd_soc_component_update_bits(component, TAS6424_SAP_CTRL,
|
2017-12-05 23:54:12 +08:00
|
|
|
TAS6424_SAP_RATE_MASK |
|
|
|
|
TAS6424_SAP_TDM_SLOT_SZ_16,
|
|
|
|
sap_ctrl);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tas6424_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
struct snd_soc_component *component = dai->component;
|
2017-12-05 23:54:12 +08:00
|
|
|
u8 serial_format = 0;
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_dbg(component->dev, "%s() fmt=0x%0x\n", __func__, fmt);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
/* clock masters */
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
|
|
break;
|
|
|
|
default:
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "Invalid DAI master/slave interface\n");
|
2017-12-05 23:54:12 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* signal polarity */
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
|
|
break;
|
|
|
|
default:
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "Invalid DAI clock signal polarity\n");
|
2017-12-05 23:54:12 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* interface format */
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
|
|
case SND_SOC_DAIFMT_I2S:
|
|
|
|
serial_format |= TAS6424_SAP_I2S;
|
|
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
|
|
serial_format |= TAS6424_SAP_DSP;
|
|
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
|
|
/*
|
|
|
|
* We can use the fact that the TAS6424 does not care about the
|
|
|
|
* LRCLK duty cycle during TDM to receive DSP_B formatted data
|
|
|
|
* in LEFTJ mode (no delaying of the 1st data bit).
|
|
|
|
*/
|
|
|
|
serial_format |= TAS6424_SAP_LEFTJ;
|
|
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
|
|
serial_format |= TAS6424_SAP_LEFTJ;
|
|
|
|
break;
|
|
|
|
default:
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "Invalid DAI interface format\n");
|
2017-12-05 23:54:12 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
snd_soc_component_update_bits(component, TAS6424_SAP_CTRL,
|
2017-12-05 23:54:12 +08:00
|
|
|
TAS6424_SAP_FMT_MASK, serial_format);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tas6424_set_dai_tdm_slot(struct snd_soc_dai *dai,
|
|
|
|
unsigned int tx_mask, unsigned int rx_mask,
|
|
|
|
int slots, int slot_width)
|
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
struct snd_soc_component *component = dai->component;
|
2017-12-05 23:54:12 +08:00
|
|
|
unsigned int first_slot, last_slot;
|
|
|
|
bool sap_tdm_slot_last;
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_dbg(component->dev, "%s() tx_mask=%d rx_mask=%d\n", __func__,
|
2017-12-05 23:54:12 +08:00
|
|
|
tx_mask, rx_mask);
|
|
|
|
|
|
|
|
if (!tx_mask || !rx_mask)
|
|
|
|
return 0; /* nothing needed to disable TDM mode */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Determine the first slot and last slot that is being requested so
|
|
|
|
* we'll be able to more easily enforce certain constraints as the
|
|
|
|
* TAS6424's TDM interface is not fully configurable.
|
|
|
|
*/
|
|
|
|
first_slot = __ffs(tx_mask);
|
|
|
|
last_slot = __fls(rx_mask);
|
|
|
|
|
|
|
|
if (last_slot - first_slot != 4) {
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "tdm mask must cover 4 contiguous slots\n");
|
2017-12-05 23:54:12 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (first_slot) {
|
|
|
|
case 0:
|
|
|
|
sap_tdm_slot_last = false;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
sap_tdm_slot_last = true;
|
|
|
|
break;
|
|
|
|
default:
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "tdm mask must start at slot 0 or 4\n");
|
2017-12-05 23:54:12 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, TAS6424_SAP_TDM_SLOT_LAST,
|
2017-12-05 23:54:12 +08:00
|
|
|
sap_tdm_slot_last ? TAS6424_SAP_TDM_SLOT_LAST : 0);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tas6424_mute(struct snd_soc_dai *dai, int mute)
|
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
struct snd_soc_component *component = dai->component;
|
2018-04-27 21:55:48 +08:00
|
|
|
struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component);
|
2017-12-05 23:54:12 +08:00
|
|
|
unsigned int val;
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_dbg(component->dev, "%s() mute=%d\n", __func__, mute);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
2018-04-27 21:55:48 +08:00
|
|
|
if (tas6424->mute_gpio) {
|
|
|
|
gpiod_set_value_cansleep(tas6424->mute_gpio, mute);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-12-05 23:54:12 +08:00
|
|
|
if (mute)
|
|
|
|
val = TAS6424_ALL_STATE_MUTE;
|
|
|
|
else
|
|
|
|
val = TAS6424_ALL_STATE_PLAY;
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, val);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
static int tas6424_power_off(struct snd_soc_component *component)
|
2017-12-05 23:54:12 +08:00
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component);
|
2017-12-05 23:54:12 +08:00
|
|
|
int ret;
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, TAS6424_ALL_STATE_HIZ);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
regcache_cache_only(tas6424->regmap, true);
|
|
|
|
regcache_mark_dirty(tas6424->regmap);
|
|
|
|
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies),
|
|
|
|
tas6424->supplies);
|
|
|
|
if (ret < 0) {
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "failed to disable supplies: %d\n", ret);
|
2017-12-05 23:54:12 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
static int tas6424_power_on(struct snd_soc_component *component)
|
2017-12-05 23:54:12 +08:00
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component);
|
2017-12-05 23:54:12 +08:00
|
|
|
int ret;
|
2018-04-27 21:55:48 +08:00
|
|
|
u8 chan_states;
|
2018-05-03 15:36:27 +08:00
|
|
|
int no_auto_diags = 0;
|
|
|
|
unsigned int reg_val;
|
|
|
|
|
|
|
|
if (!regmap_read(tas6424->regmap, TAS6424_DC_DIAG_CTRL1, ®_val))
|
|
|
|
no_auto_diags = reg_val & TAS6424_LDGBYPASS_MASK;
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies),
|
|
|
|
tas6424->supplies);
|
|
|
|
if (ret < 0) {
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "failed to enable supplies: %d\n", ret);
|
2017-12-05 23:54:12 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
regcache_cache_only(tas6424->regmap, false);
|
|
|
|
|
|
|
|
ret = regcache_sync(tas6424->regmap);
|
|
|
|
if (ret < 0) {
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_err(component->dev, "failed to sync regcache: %d\n", ret);
|
2017-12-05 23:54:12 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2018-04-27 21:55:48 +08:00
|
|
|
if (tas6424->mute_gpio) {
|
|
|
|
gpiod_set_value_cansleep(tas6424->mute_gpio, 0);
|
|
|
|
/*
|
|
|
|
* channels are muted via the mute pin. Don't also mute
|
|
|
|
* them via the registers so that subsequent register
|
|
|
|
* access is not necessary to un-mute the channels
|
|
|
|
*/
|
|
|
|
chan_states = TAS6424_ALL_STATE_PLAY;
|
|
|
|
} else {
|
|
|
|
chan_states = TAS6424_ALL_STATE_MUTE;
|
|
|
|
}
|
|
|
|
snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, chan_states);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
/* any time we come out of HIZ, the output channels automatically run DC
|
2018-05-03 15:36:27 +08:00
|
|
|
* load diagnostics if autodiagnotics are enabled. wait here until this
|
|
|
|
* completes.
|
2017-12-05 23:54:12 +08:00
|
|
|
*/
|
2018-05-03 15:36:27 +08:00
|
|
|
if (!no_auto_diags)
|
|
|
|
msleep(230);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
static int tas6424_set_bias_level(struct snd_soc_component *component,
|
2017-12-05 23:54:12 +08:00
|
|
|
enum snd_soc_bias_level level)
|
|
|
|
{
|
2018-01-29 12:48:04 +08:00
|
|
|
dev_dbg(component->dev, "%s() level=%d\n", __func__, level);
|
2017-12-05 23:54:12 +08:00
|
|
|
|
|
|
|
switch (level) {
|
|
|
|
case SND_SOC_BIAS_ON:
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
2018-01-29 12:48:04 +08:00
|
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF)
|
|
|
|
tas6424_power_on(component);
|
2017-12-05 23:54:12 +08:00
|
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
2018-01-29 12:48:04 +08:00
|
|
|
tas6424_power_off(component);
|
2017-12-05 23:54:12 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
static struct snd_soc_component_driver soc_codec_dev_tas6424 = {
|
|
|
|
.set_bias_level = tas6424_set_bias_level,
|
|
|
|
.controls = tas6424_snd_controls,
|
|
|
|
.num_controls = ARRAY_SIZE(tas6424_snd_controls),
|
|
|
|
.dapm_widgets = tas6424_dapm_widgets,
|
|
|
|
.num_dapm_widgets = ARRAY_SIZE(tas6424_dapm_widgets),
|
|
|
|
.dapm_routes = tas6424_audio_map,
|
|
|
|
.num_dapm_routes = ARRAY_SIZE(tas6424_audio_map),
|
|
|
|
.use_pmdown_time = 1,
|
|
|
|
.endianness = 1,
|
|
|
|
.non_legacy_dai_naming = 1,
|
2017-12-05 23:54:12 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct snd_soc_dai_ops tas6424_speaker_dai_ops = {
|
|
|
|
.hw_params = tas6424_hw_params,
|
|
|
|
.set_fmt = tas6424_set_dai_fmt,
|
|
|
|
.set_tdm_slot = tas6424_set_dai_tdm_slot,
|
|
|
|
.digital_mute = tas6424_mute,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct snd_soc_dai_driver tas6424_dai[] = {
|
|
|
|
{
|
|
|
|
.name = "tas6424-amplifier",
|
|
|
|
.playback = {
|
|
|
|
.stream_name = "Playback",
|
|
|
|
.channels_min = 1,
|
|
|
|
.channels_max = 4,
|
|
|
|
.rates = TAS6424_RATES,
|
|
|
|
.formats = TAS6424_FORMATS,
|
|
|
|
},
|
|
|
|
.ops = &tas6424_speaker_dai_ops,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static void tas6424_fault_check_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct tas6424_data *tas6424 = container_of(work, struct tas6424_data,
|
|
|
|
fault_check_work.work);
|
|
|
|
struct device *dev = tas6424->dev;
|
|
|
|
unsigned int reg;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT1, ®);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to read FAULT1 register: %d\n", ret);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ignore any clock faults as there is no clean way to check for them.
|
|
|
|
* We would need to start checking for those faults *after* the SAIF
|
|
|
|
* stream has been setup, and stop checking *before* the stream is
|
|
|
|
* stopped to avoid any false-positives. However there are no
|
|
|
|
* appropriate hooks to monitor these events.
|
|
|
|
*/
|
|
|
|
reg &= TAS6424_FAULT_PVDD_OV |
|
|
|
|
TAS6424_FAULT_VBAT_OV |
|
|
|
|
TAS6424_FAULT_PVDD_UV |
|
|
|
|
TAS6424_FAULT_VBAT_UV;
|
|
|
|
|
|
|
|
if (reg)
|
|
|
|
goto check_global_fault2_reg;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Only flag errors once for a given occurrence. This is needed as
|
|
|
|
* the TAS6424 will take time clearing the fault condition internally
|
|
|
|
* during which we don't want to bombard the system with the same
|
|
|
|
* error message over and over.
|
|
|
|
*/
|
|
|
|
if ((reg & TAS6424_FAULT_PVDD_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_OV))
|
|
|
|
dev_crit(dev, "experienced a PVDD overvoltage fault\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_VBAT_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_OV))
|
|
|
|
dev_crit(dev, "experienced a VBAT overvoltage fault\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_PVDD_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_UV))
|
|
|
|
dev_crit(dev, "experienced a PVDD undervoltage fault\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_VBAT_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_UV))
|
|
|
|
dev_crit(dev, "experienced a VBAT undervoltage fault\n");
|
|
|
|
|
|
|
|
/* Store current fault1 value so we can detect any changes next time */
|
|
|
|
tas6424->last_fault1 = reg;
|
|
|
|
|
|
|
|
check_global_fault2_reg:
|
|
|
|
ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT2, ®);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to read FAULT2 register: %d\n", ret);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg &= TAS6424_FAULT_OTSD |
|
|
|
|
TAS6424_FAULT_OTSD_CH1 |
|
|
|
|
TAS6424_FAULT_OTSD_CH2 |
|
|
|
|
TAS6424_FAULT_OTSD_CH3 |
|
|
|
|
TAS6424_FAULT_OTSD_CH4;
|
|
|
|
|
|
|
|
if (!reg)
|
|
|
|
goto check_warn_reg;
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD))
|
|
|
|
dev_crit(dev, "experienced a global overtemp shutdown\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_OTSD_CH1) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH1))
|
|
|
|
dev_crit(dev, "experienced an overtemp shutdown on CH1\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_OTSD_CH2) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH2))
|
|
|
|
dev_crit(dev, "experienced an overtemp shutdown on CH2\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_OTSD_CH3) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH3))
|
|
|
|
dev_crit(dev, "experienced an overtemp shutdown on CH3\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_FAULT_OTSD_CH4) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH4))
|
|
|
|
dev_crit(dev, "experienced an overtemp shutdown on CH4\n");
|
|
|
|
|
|
|
|
/* Store current fault2 value so we can detect any changes next time */
|
|
|
|
tas6424->last_fault2 = reg;
|
|
|
|
|
|
|
|
check_warn_reg:
|
|
|
|
ret = regmap_read(tas6424->regmap, TAS6424_WARN, ®);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to read WARN register: %d\n", ret);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg &= TAS6424_WARN_VDD_UV |
|
|
|
|
TAS6424_WARN_VDD_POR |
|
|
|
|
TAS6424_WARN_VDD_OTW |
|
|
|
|
TAS6424_WARN_VDD_OTW_CH1 |
|
|
|
|
TAS6424_WARN_VDD_OTW_CH2 |
|
|
|
|
TAS6424_WARN_VDD_OTW_CH3 |
|
|
|
|
TAS6424_WARN_VDD_OTW_CH4;
|
|
|
|
|
|
|
|
if (!reg)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV))
|
|
|
|
dev_warn(dev, "experienced a VDD under voltage condition\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_WARN_VDD_POR) && !(tas6424->last_warn & TAS6424_WARN_VDD_POR))
|
|
|
|
dev_warn(dev, "experienced a VDD POR condition\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_WARN_VDD_OTW) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW))
|
|
|
|
dev_warn(dev, "experienced a global overtemp warning\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_WARN_VDD_OTW_CH1) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH1))
|
|
|
|
dev_warn(dev, "experienced an overtemp warning on CH1\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_WARN_VDD_OTW_CH2) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH2))
|
|
|
|
dev_warn(dev, "experienced an overtemp warning on CH2\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_WARN_VDD_OTW_CH3) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH3))
|
|
|
|
dev_warn(dev, "experienced an overtemp warning on CH3\n");
|
|
|
|
|
|
|
|
if ((reg & TAS6424_WARN_VDD_OTW_CH4) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH4))
|
|
|
|
dev_warn(dev, "experienced an overtemp warning on CH4\n");
|
|
|
|
|
|
|
|
/* Store current warn value so we can detect any changes next time */
|
|
|
|
tas6424->last_warn = reg;
|
|
|
|
|
|
|
|
/* Clear any faults by toggling the CLEAR_FAULT control bit */
|
|
|
|
ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3,
|
|
|
|
TAS6424_CLEAR_FAULT, TAS6424_CLEAR_FAULT);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret);
|
|
|
|
|
|
|
|
ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3,
|
|
|
|
TAS6424_CLEAR_FAULT, 0);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret);
|
|
|
|
|
|
|
|
out:
|
|
|
|
/* Schedule the next fault check at the specified interval */
|
|
|
|
schedule_delayed_work(&tas6424->fault_check_work,
|
|
|
|
msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL));
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct reg_default tas6424_reg_defaults[] = {
|
|
|
|
{ TAS6424_MODE_CTRL, 0x00 },
|
|
|
|
{ TAS6424_MISC_CTRL1, 0x32 },
|
|
|
|
{ TAS6424_MISC_CTRL2, 0x62 },
|
|
|
|
{ TAS6424_SAP_CTRL, 0x04 },
|
|
|
|
{ TAS6424_CH_STATE_CTRL, 0x55 },
|
|
|
|
{ TAS6424_CH1_VOL_CTRL, 0xcf },
|
|
|
|
{ TAS6424_CH2_VOL_CTRL, 0xcf },
|
|
|
|
{ TAS6424_CH3_VOL_CTRL, 0xcf },
|
|
|
|
{ TAS6424_CH4_VOL_CTRL, 0xcf },
|
|
|
|
{ TAS6424_DC_DIAG_CTRL1, 0x00 },
|
|
|
|
{ TAS6424_DC_DIAG_CTRL2, 0x11 },
|
|
|
|
{ TAS6424_DC_DIAG_CTRL3, 0x11 },
|
|
|
|
{ TAS6424_PIN_CTRL, 0xff },
|
|
|
|
{ TAS6424_AC_DIAG_CTRL1, 0x00 },
|
|
|
|
{ TAS6424_MISC_CTRL3, 0x00 },
|
|
|
|
{ TAS6424_CLIP_CTRL, 0x01 },
|
|
|
|
{ TAS6424_CLIP_WINDOW, 0x14 },
|
|
|
|
{ TAS6424_CLIP_WARN, 0x00 },
|
|
|
|
{ TAS6424_CBC_STAT, 0x00 },
|
|
|
|
{ TAS6424_MISC_CTRL4, 0x40 },
|
|
|
|
};
|
|
|
|
|
|
|
|
static bool tas6424_is_writable_reg(struct device *dev, unsigned int reg)
|
|
|
|
{
|
|
|
|
switch (reg) {
|
|
|
|
case TAS6424_MODE_CTRL:
|
|
|
|
case TAS6424_MISC_CTRL1:
|
|
|
|
case TAS6424_MISC_CTRL2:
|
|
|
|
case TAS6424_SAP_CTRL:
|
|
|
|
case TAS6424_CH_STATE_CTRL:
|
|
|
|
case TAS6424_CH1_VOL_CTRL:
|
|
|
|
case TAS6424_CH2_VOL_CTRL:
|
|
|
|
case TAS6424_CH3_VOL_CTRL:
|
|
|
|
case TAS6424_CH4_VOL_CTRL:
|
|
|
|
case TAS6424_DC_DIAG_CTRL1:
|
|
|
|
case TAS6424_DC_DIAG_CTRL2:
|
|
|
|
case TAS6424_DC_DIAG_CTRL3:
|
|
|
|
case TAS6424_PIN_CTRL:
|
|
|
|
case TAS6424_AC_DIAG_CTRL1:
|
|
|
|
case TAS6424_MISC_CTRL3:
|
|
|
|
case TAS6424_CLIP_CTRL:
|
|
|
|
case TAS6424_CLIP_WINDOW:
|
|
|
|
case TAS6424_CLIP_WARN:
|
|
|
|
case TAS6424_CBC_STAT:
|
|
|
|
case TAS6424_MISC_CTRL4:
|
|
|
|
return true;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool tas6424_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
|
|
{
|
|
|
|
switch (reg) {
|
|
|
|
case TAS6424_DC_LOAD_DIAG_REP12:
|
|
|
|
case TAS6424_DC_LOAD_DIAG_REP34:
|
|
|
|
case TAS6424_DC_LOAD_DIAG_REPLO:
|
|
|
|
case TAS6424_CHANNEL_STATE:
|
|
|
|
case TAS6424_CHANNEL_FAULT:
|
|
|
|
case TAS6424_GLOB_FAULT1:
|
|
|
|
case TAS6424_GLOB_FAULT2:
|
|
|
|
case TAS6424_WARN:
|
|
|
|
case TAS6424_AC_LOAD_DIAG_REP1:
|
|
|
|
case TAS6424_AC_LOAD_DIAG_REP2:
|
|
|
|
case TAS6424_AC_LOAD_DIAG_REP3:
|
|
|
|
case TAS6424_AC_LOAD_DIAG_REP4:
|
|
|
|
return true;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct regmap_config tas6424_regmap_config = {
|
|
|
|
.reg_bits = 8,
|
|
|
|
.val_bits = 8,
|
|
|
|
|
|
|
|
.writeable_reg = tas6424_is_writable_reg,
|
|
|
|
.volatile_reg = tas6424_is_volatile_reg,
|
|
|
|
|
|
|
|
.max_register = TAS6424_MAX,
|
|
|
|
.reg_defaults = tas6424_reg_defaults,
|
|
|
|
.num_reg_defaults = ARRAY_SIZE(tas6424_reg_defaults),
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
};
|
|
|
|
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
|
|
static const struct of_device_id tas6424_of_ids[] = {
|
|
|
|
{ .compatible = "ti,tas6424", },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, tas6424_of_ids);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static int tas6424_i2c_probe(struct i2c_client *client,
|
|
|
|
const struct i2c_device_id *id)
|
|
|
|
{
|
|
|
|
struct device *dev = &client->dev;
|
|
|
|
struct tas6424_data *tas6424;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
tas6424 = devm_kzalloc(dev, sizeof(*tas6424), GFP_KERNEL);
|
|
|
|
if (!tas6424)
|
|
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(dev, tas6424);
|
|
|
|
|
|
|
|
tas6424->dev = dev;
|
|
|
|
|
|
|
|
tas6424->regmap = devm_regmap_init_i2c(client, &tas6424_regmap_config);
|
|
|
|
if (IS_ERR(tas6424->regmap)) {
|
|
|
|
ret = PTR_ERR(tas6424->regmap);
|
|
|
|
dev_err(dev, "unable to allocate register map: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2018-04-27 21:55:47 +08:00
|
|
|
/*
|
|
|
|
* Get control of the standby pin and set it LOW to take the codec
|
|
|
|
* out of the stand-by mode.
|
|
|
|
* Note: The actual pin polarity is taken care of in the GPIO lib
|
|
|
|
* according the polarity specified in the DTS.
|
|
|
|
*/
|
|
|
|
tas6424->standby_gpio = devm_gpiod_get_optional(dev, "standby",
|
|
|
|
GPIOD_OUT_LOW);
|
|
|
|
if (IS_ERR(tas6424->standby_gpio)) {
|
|
|
|
if (PTR_ERR(tas6424->standby_gpio) == -EPROBE_DEFER)
|
|
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_info(dev, "failed to get standby GPIO: %ld\n",
|
|
|
|
PTR_ERR(tas6424->standby_gpio));
|
|
|
|
tas6424->standby_gpio = NULL;
|
|
|
|
}
|
|
|
|
|
2018-04-27 21:55:48 +08:00
|
|
|
/*
|
|
|
|
* Get control of the mute pin and set it HIGH in order to start with
|
|
|
|
* all the output muted.
|
|
|
|
* Note: The actual pin polarity is taken care of in the GPIO lib
|
|
|
|
* according the polarity specified in the DTS.
|
|
|
|
*/
|
|
|
|
tas6424->mute_gpio = devm_gpiod_get_optional(dev, "mute",
|
|
|
|
GPIOD_OUT_HIGH);
|
|
|
|
if (IS_ERR(tas6424->mute_gpio)) {
|
|
|
|
if (PTR_ERR(tas6424->mute_gpio) == -EPROBE_DEFER)
|
|
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_info(dev, "failed to get nmute GPIO: %ld\n",
|
|
|
|
PTR_ERR(tas6424->mute_gpio));
|
|
|
|
tas6424->mute_gpio = NULL;
|
|
|
|
}
|
|
|
|
|
2017-12-05 23:54:12 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(tas6424->supplies); i++)
|
|
|
|
tas6424->supplies[i].supply = tas6424_supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tas6424->supplies),
|
|
|
|
tas6424->supplies);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "unable to request supplies: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies),
|
|
|
|
tas6424->supplies);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "unable to enable supplies: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset device to establish well-defined startup state */
|
|
|
|
ret = regmap_update_bits(tas6424->regmap, TAS6424_MODE_CTRL,
|
|
|
|
TAS6424_RESET, TAS6424_RESET);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "unable to reset device: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
INIT_DELAYED_WORK(&tas6424->fault_check_work, tas6424_fault_check_work);
|
|
|
|
|
2018-01-29 12:48:04 +08:00
|
|
|
ret = devm_snd_soc_register_component(dev, &soc_codec_dev_tas6424,
|
2017-12-05 23:54:12 +08:00
|
|
|
tas6424_dai, ARRAY_SIZE(tas6424_dai));
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "unable to register codec: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tas6424_i2c_remove(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct device *dev = &client->dev;
|
|
|
|
struct tas6424_data *tas6424 = dev_get_drvdata(dev);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
cancel_delayed_work_sync(&tas6424->fault_check_work);
|
|
|
|
|
2018-04-27 21:55:47 +08:00
|
|
|
/* put the codec in stand-by */
|
|
|
|
if (tas6424->standby_gpio)
|
|
|
|
gpiod_set_value_cansleep(tas6424->standby_gpio, 1);
|
|
|
|
|
2017-12-05 23:54:12 +08:00
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies),
|
|
|
|
tas6424->supplies);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "unable to disable supplies: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct i2c_device_id tas6424_i2c_ids[] = {
|
|
|
|
{ "tas6424", 0 },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, tas6424_i2c_ids);
|
|
|
|
|
|
|
|
static struct i2c_driver tas6424_i2c_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "tas6424",
|
|
|
|
.of_match_table = of_match_ptr(tas6424_of_ids),
|
|
|
|
},
|
|
|
|
.probe = tas6424_i2c_probe,
|
|
|
|
.remove = tas6424_i2c_remove,
|
|
|
|
.id_table = tas6424_i2c_ids,
|
|
|
|
};
|
|
|
|
module_i2c_driver(tas6424_i2c_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>");
|
|
|
|
MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
|
|
|
|
MODULE_DESCRIPTION("TAS6424 Audio amplifier driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|