OpenCloudOS-Kernel/drivers/scsi/lpfc/lpfc_hbadisc.c

3104 lines
84 KiB
C
Raw Normal View History

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2004-2008 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/kthread.h>
#include <linux/interrupt.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_hw.h"
#include "lpfc_disc.h"
#include "lpfc_sli.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_debugfs.h"
/* AlpaArray for assignment of scsid for scan-down and bind_method */
static uint8_t lpfcAlpaArray[] = {
0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6,
0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA,
0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5,
0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9,
0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97,
0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79,
0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B,
0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56,
0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A,
0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35,
0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29,
0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17,
0x10, 0x0F, 0x08, 0x04, 0x02, 0x01
};
static void lpfc_disc_timeout_handler(struct lpfc_vport *);
static void lpfc_disc_flush_list(struct lpfc_vport *vport);
void
lpfc_terminate_rport_io(struct fc_rport *rport)
{
struct lpfc_rport_data *rdata;
struct lpfc_nodelist * ndlp;
struct lpfc_hba *phba;
rdata = rport->dd_data;
ndlp = rdata->pnode;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
if (rport->roles & FC_RPORT_ROLE_FCP_TARGET)
printk(KERN_ERR "Cannot find remote node"
" to terminate I/O Data x%x\n",
rport->port_id);
return;
}
phba = ndlp->vport->phba;
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
"rport terminate: sid:x%x did:x%x flg:x%x",
ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
if (ndlp->nlp_sid != NLP_NO_SID) {
lpfc_sli_abort_iocb(ndlp->vport,
&phba->sli.ring[phba->sli.fcp_ring],
ndlp->nlp_sid, 0, LPFC_CTX_TGT);
}
/*
* A device is normally blocked for rediscovery and unblocked when
* devloss timeout happens. In case a vport is removed or driver
* unloaded before devloss timeout happens, we need to unblock here.
*/
scsi_target_unblock(&rport->dev);
return;
}
/*
* This function will be called when dev_loss_tmo fire.
*/
void
lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
{
struct lpfc_rport_data *rdata;
struct lpfc_nodelist * ndlp;
struct lpfc_vport *vport;
struct lpfc_hba *phba;
struct lpfc_work_evt *evtp;
int put_node;
int put_rport;
rdata = rport->dd_data;
ndlp = rdata->pnode;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
return;
vport = ndlp->vport;
phba = vport->phba;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
"rport devlosscb: sid:x%x did:x%x flg:x%x",
ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
/* Don't defer this if we are in the process of deleting the vport
* or unloading the driver. The unload will cleanup the node
* appropriately we just need to cleanup the ndlp rport info here.
*/
if (vport->load_flag & FC_UNLOADING) {
put_node = rdata->pnode != NULL;
put_rport = ndlp->rport != NULL;
rdata->pnode = NULL;
ndlp->rport = NULL;
if (put_node)
lpfc_nlp_put(ndlp);
if (put_rport)
put_device(&rport->dev);
return;
}
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE)
return;
evtp = &ndlp->dev_loss_evt;
if (!list_empty(&evtp->evt_listp))
return;
spin_lock_irq(&phba->hbalock);
/* We need to hold the node by incrementing the reference
* count until this queued work is done
*/
evtp->evt_arg1 = lpfc_nlp_get(ndlp);
if (evtp->evt_arg1) {
evtp->evt = LPFC_EVT_DEV_LOSS;
list_add_tail(&evtp->evt_listp, &phba->work_list);
lpfc_worker_wake_up(phba);
}
spin_unlock_irq(&phba->hbalock);
return;
}
/*
* This function is called from the worker thread when dev_loss_tmo
* expire.
*/
static void
lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
{
struct lpfc_rport_data *rdata;
struct fc_rport *rport;
struct lpfc_vport *vport;
struct lpfc_hba *phba;
uint8_t *name;
int put_node;
int put_rport;
int warn_on = 0;
rport = ndlp->rport;
if (!rport)
return;
rdata = rport->dd_data;
name = (uint8_t *) &ndlp->nlp_portname;
vport = ndlp->vport;
phba = vport->phba;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
"rport devlosstmo:did:x%x type:x%x id:x%x",
ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id);
/* Don't defer this if we are in the process of deleting the vport
* or unloading the driver. The unload will cleanup the node
* appropriately we just need to cleanup the ndlp rport info here.
*/
if (vport->load_flag & FC_UNLOADING) {
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
if (ndlp->nlp_sid != NLP_NO_SID) {
/* flush the target */
lpfc_sli_abort_iocb(vport,
&phba->sli.ring[phba->sli.fcp_ring],
ndlp->nlp_sid, 0, LPFC_CTX_TGT);
}
put_node = rdata->pnode != NULL;
put_rport = ndlp->rport != NULL;
rdata->pnode = NULL;
ndlp->rport = NULL;
if (put_node)
lpfc_nlp_put(ndlp);
if (put_rport)
put_device(&rport->dev);
return;
}
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE)
return;
if (ndlp->nlp_type & NLP_FABRIC) {
/* We will clean up these Nodes in linkup */
put_node = rdata->pnode != NULL;
put_rport = ndlp->rport != NULL;
rdata->pnode = NULL;
ndlp->rport = NULL;
if (put_node)
lpfc_nlp_put(ndlp);
if (put_rport)
put_device(&rport->dev);
return;
}
if (ndlp->nlp_sid != NLP_NO_SID) {
warn_on = 1;
/* flush the target */
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
ndlp->nlp_sid, 0, LPFC_CTX_TGT);
}
if (vport->load_flag & FC_UNLOADING)
warn_on = 0;
if (warn_on) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0203 Devloss timeout on "
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
"WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
"NPort x%06x Data: x%x x%x x%x\n",
*name, *(name+1), *(name+2), *(name+3),
*(name+4), *(name+5), *(name+6), *(name+7),
ndlp->nlp_DID, ndlp->nlp_flag,
ndlp->nlp_state, ndlp->nlp_rpi);
} else {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0204 Devloss timeout on "
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
"WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
"NPort x%06x Data: x%x x%x x%x\n",
*name, *(name+1), *(name+2), *(name+3),
*(name+4), *(name+5), *(name+6), *(name+7),
ndlp->nlp_DID, ndlp->nlp_flag,
ndlp->nlp_state, ndlp->nlp_rpi);
}
put_node = rdata->pnode != NULL;
put_rport = ndlp->rport != NULL;
rdata->pnode = NULL;
ndlp->rport = NULL;
if (put_node)
lpfc_nlp_put(ndlp);
if (put_rport)
put_device(&rport->dev);
if (!(vport->load_flag & FC_UNLOADING) &&
!(ndlp->nlp_flag & NLP_DELAY_TMO) &&
!(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
(ndlp->nlp_state != NLP_STE_UNMAPPED_NODE))
lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
}
static void
lpfc_work_list_done(struct lpfc_hba *phba)
{
struct lpfc_work_evt *evtp = NULL;
struct lpfc_nodelist *ndlp;
int free_evt;
spin_lock_irq(&phba->hbalock);
while (!list_empty(&phba->work_list)) {
list_remove_head((&phba->work_list), evtp, typeof(*evtp),
evt_listp);
spin_unlock_irq(&phba->hbalock);
free_evt = 1;
switch (evtp->evt) {
case LPFC_EVT_ELS_RETRY:
ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1);
lpfc_els_retry_delay_handler(ndlp);
free_evt = 0; /* evt is part of ndlp */
/* decrement the node reference count held
* for this queued work
*/
lpfc_nlp_put(ndlp);
break;
case LPFC_EVT_DEV_LOSS:
ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1);
lpfc_dev_loss_tmo_handler(ndlp);
free_evt = 0;
/* decrement the node reference count held for
* this queued work
*/
lpfc_nlp_put(ndlp);
break;
case LPFC_EVT_ONLINE:
if (phba->link_state < LPFC_LINK_DOWN)
*(int *) (evtp->evt_arg1) = lpfc_online(phba);
else
*(int *) (evtp->evt_arg1) = 0;
complete((struct completion *)(evtp->evt_arg2));
break;
case LPFC_EVT_OFFLINE_PREP:
if (phba->link_state >= LPFC_LINK_DOWN)
lpfc_offline_prep(phba);
*(int *)(evtp->evt_arg1) = 0;
complete((struct completion *)(evtp->evt_arg2));
break;
case LPFC_EVT_OFFLINE:
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
*(int *)(evtp->evt_arg1) =
lpfc_sli_brdready(phba, HS_FFRDY | HS_MBRDY);
lpfc_unblock_mgmt_io(phba);
complete((struct completion *)(evtp->evt_arg2));
break;
case LPFC_EVT_WARM_START:
lpfc_offline(phba);
lpfc_reset_barrier(phba);
lpfc_sli_brdreset(phba);
lpfc_hba_down_post(phba);
*(int *)(evtp->evt_arg1) =
lpfc_sli_brdready(phba, HS_MBRDY);
lpfc_unblock_mgmt_io(phba);
complete((struct completion *)(evtp->evt_arg2));
break;
case LPFC_EVT_KILL:
lpfc_offline(phba);
*(int *)(evtp->evt_arg1)
= (phba->pport->stopped)
? 0 : lpfc_sli_brdkill(phba);
lpfc_unblock_mgmt_io(phba);
complete((struct completion *)(evtp->evt_arg2));
break;
}
if (free_evt)
kfree(evtp);
spin_lock_irq(&phba->hbalock);
}
spin_unlock_irq(&phba->hbalock);
}
static void
lpfc_work_done(struct lpfc_hba *phba)
{
struct lpfc_sli_ring *pring;
uint32_t ha_copy, status, control, work_port_events;
struct lpfc_vport **vports;
struct lpfc_vport *vport;
int i;
spin_lock_irq(&phba->hbalock);
ha_copy = phba->work_ha;
phba->work_ha = 0;
spin_unlock_irq(&phba->hbalock);
if (ha_copy & HA_ERATT)
lpfc_handle_eratt(phba);
if (ha_copy & HA_MBATT)
lpfc_sli_handle_mb_event(phba);
if (ha_copy & HA_LATT)
lpfc_handle_latt(phba);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
for(i = 0; i <= phba->max_vpi; i++) {
/*
* We could have no vports in array if unloading, so if
* this happens then just use the pport
*/
if (vports[i] == NULL && i == 0)
vport = phba->pport;
else
vport = vports[i];
if (vport == NULL)
break;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
spin_lock_irq(&vport->work_port_lock);
work_port_events = vport->work_port_events;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
vport->work_port_events &= ~work_port_events;
spin_unlock_irq(&vport->work_port_lock);
if (work_port_events & WORKER_DISC_TMO)
lpfc_disc_timeout_handler(vport);
if (work_port_events & WORKER_ELS_TMO)
lpfc_els_timeout_handler(vport);
if (work_port_events & WORKER_HB_TMO)
lpfc_hb_timeout_handler(phba);
if (work_port_events & WORKER_MBOX_TMO)
lpfc_mbox_timeout_handler(phba);
if (work_port_events & WORKER_FABRIC_BLOCK_TMO)
lpfc_unblock_fabric_iocbs(phba);
if (work_port_events & WORKER_FDMI_TMO)
lpfc_fdmi_timeout_handler(vport);
if (work_port_events & WORKER_RAMP_DOWN_QUEUE)
lpfc_ramp_down_queue_handler(phba);
if (work_port_events & WORKER_RAMP_UP_QUEUE)
lpfc_ramp_up_queue_handler(phba);
}
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
lpfc_destroy_vport_work_array(phba, vports);
pring = &phba->sli.ring[LPFC_ELS_RING];
status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING)));
status >>= (4*LPFC_ELS_RING);
if ((status & HA_RXMASK)
|| (pring->flag & LPFC_DEFERRED_RING_EVENT)) {
if (pring->flag & LPFC_STOP_IOCB_EVENT) {
pring->flag |= LPFC_DEFERRED_RING_EVENT;
/* Set the lpfc data pending flag */
set_bit(LPFC_DATA_READY, &phba->data_flags);
} else {
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
pring->flag &= ~LPFC_DEFERRED_RING_EVENT;
lpfc_sli_handle_slow_ring_event(phba, pring,
(status &
HA_RXMASK));
}
/*
* Turn on Ring interrupts
*/
spin_lock_irq(&phba->hbalock);
control = readl(phba->HCregaddr);
if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
lpfc_debugfs_slow_ring_trc(phba,
"WRK Enable ring: cntl:x%x hacopy:x%x",
control, ha_copy, 0);
control |= (HC_R0INT_ENA << LPFC_ELS_RING);
writel(control, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
}
else {
lpfc_debugfs_slow_ring_trc(phba,
"WRK Ring ok: cntl:x%x hacopy:x%x",
control, ha_copy, 0);
}
spin_unlock_irq(&phba->hbalock);
}
lpfc_work_list_done(phba);
}
int
lpfc_do_work(void *p)
{
struct lpfc_hba *phba = p;
int rc;
set_user_nice(current, -20);
phba->data_flags = 0;
while (1) {
/* wait and check worker queue activities */
rc = wait_event_interruptible(phba->work_waitq,
(test_and_clear_bit(LPFC_DATA_READY,
&phba->data_flags)
|| kthread_should_stop()));
BUG_ON(rc);
if (kthread_should_stop())
break;
/* Attend pending lpfc data processing */
lpfc_work_done(phba);
}
return 0;
}
/*
* This is only called to handle FC worker events. Since this a rare
* occurance, we allocate a struct lpfc_work_evt structure here instead of
* embedding it in the IOCB.
*/
int
lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2,
uint32_t evt)
{
struct lpfc_work_evt *evtp;
unsigned long flags;
/*
* All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will
* be queued to worker thread for processing
*/
evtp = kmalloc(sizeof(struct lpfc_work_evt), GFP_ATOMIC);
if (!evtp)
return 0;
evtp->evt_arg1 = arg1;
evtp->evt_arg2 = arg2;
evtp->evt = evt;
spin_lock_irqsave(&phba->hbalock, flags);
list_add_tail(&evtp->evt_listp, &phba->work_list);
spin_unlock_irqrestore(&phba->hbalock, flags);
lpfc_worker_wake_up(phba);
return 1;
}
void
lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove)
{
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp, *next_ndlp;
int rc;
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
continue;
if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) ||
((vport->port_type == LPFC_NPIV_PORT) &&
(ndlp->nlp_DID == NameServer_DID)))
lpfc_unreg_rpi(vport, ndlp);
/* Leave Fabric nodes alone on link down */
if (!remove && ndlp->nlp_type & NLP_FABRIC)
continue;
rc = lpfc_disc_state_machine(vport, ndlp, NULL,
remove
? NLP_EVT_DEVICE_RM
: NLP_EVT_DEVICE_RECOVERY);
}
if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) {
lpfc_mbx_unreg_vpi(vport);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
spin_unlock_irq(shost->host_lock);
}
}
void
lpfc_port_link_failure(struct lpfc_vport *vport)
{
/* Cleanup any outstanding RSCN activity */
lpfc_els_flush_rscn(vport);
/* Cleanup any outstanding ELS commands */
lpfc_els_flush_cmd(vport);
lpfc_cleanup_rpis(vport, 0);
/* Turn off discovery timer if its running */
lpfc_can_disctmo(vport);
}
static void
lpfc_linkdown_port(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKDOWN, 0);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Link Down: state:x%x rtry:x%x flg:x%x",
vport->port_state, vport->fc_ns_retry, vport->fc_flag);
lpfc_port_link_failure(vport);
}
int
lpfc_linkdown(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_vport **vports;
LPFC_MBOXQ_t *mb;
int i;
if (phba->link_state == LPFC_LINK_DOWN)
return 0;
spin_lock_irq(&phba->hbalock);
if (phba->link_state > LPFC_LINK_DOWN) {
phba->link_state = LPFC_LINK_DOWN;
phba->pport->fc_flag &= ~FC_LBIT;
}
spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
/* Issue a LINK DOWN event to all nodes */
lpfc_linkdown_port(vports[i]);
}
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
lpfc_destroy_vport_work_array(phba, vports);
/* Clean up any firmware default rpi's */
mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mb) {
lpfc_unreg_did(phba, 0xffff, 0xffffffff, mb);
mb->vport = vport;
mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT)
== MBX_NOT_FINISHED) {
mempool_free(mb, phba->mbox_mem_pool);
}
}
/* Setup myDID for link up if we are in pt2pt mode */
if (phba->pport->fc_flag & FC_PT2PT) {
phba->pport->fc_myDID = 0;
mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mb) {
lpfc_config_link(phba, mb);
mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mb->vport = vport;
if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT)
== MBX_NOT_FINISHED) {
mempool_free(mb, phba->mbox_mem_pool);
}
}
spin_lock_irq(shost->host_lock);
phba->pport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI);
spin_unlock_irq(shost->host_lock);
}
return 0;
}
static void
lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp;
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
continue;
if (ndlp->nlp_type & NLP_FABRIC) {
/* On Linkup its safe to clean up the ndlp
* from Fabric connections.
*/
if (ndlp->nlp_DID != Fabric_DID)
lpfc_unreg_rpi(vport, ndlp);
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
} else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) {
/* Fail outstanding IO now since device is
* marked for PLOGI.
*/
lpfc_unreg_rpi(vport, ndlp);
}
}
}
static void
lpfc_linkup_port(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
if ((vport->load_flag & FC_UNLOADING) != 0)
return;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Link Up: top:x%x speed:x%x flg:x%x",
phba->fc_topology, phba->fc_linkspeed, phba->link_flag);
/* If NPIV is not enabled, only bring the physical port up */
if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
(vport != phba->pport))
return;
fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKUP, 0);
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | FC_ABORT_DISCOVERY |
FC_RSCN_MODE | FC_NLP_MORE | FC_RSCN_DISCOVERY);
vport->fc_flag |= FC_NDISC_ACTIVE;
vport->fc_ns_retry = 0;
spin_unlock_irq(shost->host_lock);
if (vport->fc_flag & FC_LBIT)
lpfc_linkup_cleanup_nodes(vport);
}
static int
lpfc_linkup(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
int i;
phba->link_state = LPFC_LINK_UP;
/* Unblock fabric iocbs if they are blocked */
clear_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags);
del_timer_sync(&phba->fabric_block_timer);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
lpfc_linkup_port(vports[i]);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
lpfc_destroy_vport_work_array(phba, vports);
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
lpfc_issue_clear_la(phba, phba->pport);
return 0;
}
/*
* This routine handles processing a CLEAR_LA mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
* as the completion routine when the command is
* handed off to the SLI layer.
*/
static void
lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_sli *psli = &phba->sli;
MAILBOX_t *mb = &pmb->mb;
uint32_t control;
/* Since we don't do discovery right now, turn these off here */
psli->ring[psli->extra_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
psli->ring[psli->fcp_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
psli->ring[psli->next_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
/* Check for error */
if ((mb->mbxStatus) && (mb->mbxStatus != 0x1601)) {
/* CLEAR_LA mbox error <mbxStatus> state <hba_state> */
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"0320 CLEAR_LA mbxStatus error x%x hba "
"state x%x\n",
mb->mbxStatus, vport->port_state);
phba->link_state = LPFC_HBA_ERROR;
goto out;
}
if (vport->port_type == LPFC_PHYSICAL_PORT)
phba->link_state = LPFC_HBA_READY;
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_PROCESS_LA;
control = readl(phba->HCregaddr);
control |= HC_LAINT_ENA;
writel(control, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
spin_unlock_irq(&phba->hbalock);
mempool_free(pmb, phba->mbox_mem_pool);
return;
out:
/* Device Discovery completes */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0225 Device Discovery completes\n");
mempool_free(pmb, phba->mbox_mem_pool);
spin_lock_irq(shost->host_lock);
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
vport->fc_flag &= ~FC_ABORT_DISCOVERY;
spin_unlock_irq(shost->host_lock);
lpfc_can_disctmo(vport);
/* turn on Link Attention interrupts */
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_PROCESS_LA;
control = readl(phba->HCregaddr);
control |= HC_LAINT_ENA;
writel(control, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
spin_unlock_irq(&phba->hbalock);
return;
}
static void
lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
if (pmb->mb.mbxStatus)
goto out;
mempool_free(pmb, phba->mbox_mem_pool);
if (phba->fc_topology == TOPOLOGY_LOOP &&
vport->fc_flag & FC_PUBLIC_LOOP &&
!(vport->fc_flag & FC_LBIT)) {
/* Need to wait for FAN - use discovery timer
* for timeout. port_state is identically
* LPFC_LOCAL_CFG_LINK while waiting for FAN
*/
lpfc_set_disctmo(vport);
return;
}
/* Start discovery by sending a FLOGI. port_state is identically
* LPFC_FLOGI while waiting for FLOGI cmpl
*/
if (vport->port_state != LPFC_FLOGI) {
lpfc_initial_flogi(vport);
}
return;
out:
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"0306 CONFIG_LINK mbxStatus error x%x "
"HBA state x%x\n",
pmb->mb.mbxStatus, vport->port_state);
mempool_free(pmb, phba->mbox_mem_pool);
lpfc_linkdown(phba);
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0200 CONFIG_LINK bad hba state x%x\n",
vport->port_state);
lpfc_issue_clear_la(phba, vport);
return;
}
static void
lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t *mb = &pmb->mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
struct lpfc_vport *vport = pmb->vport;
/* Check for error */
if (mb->mbxStatus) {
/* READ_SPARAM mbox error <mbxStatus> state <hba_state> */
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"0319 READ_SPARAM mbxStatus error x%x "
"hba state x%x>\n",
mb->mbxStatus, vport->port_state);
lpfc_linkdown(phba);
goto out;
}
memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt,
sizeof (struct serv_parm));
if (phba->cfg_soft_wwnn)
u64_to_wwn(phba->cfg_soft_wwnn,
vport->fc_sparam.nodeName.u.wwn);
if (phba->cfg_soft_wwpn)
u64_to_wwn(phba->cfg_soft_wwpn,
vport->fc_sparam.portName.u.wwn);
memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
sizeof(vport->fc_nodename));
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
sizeof(vport->fc_portname));
if (vport->port_type == LPFC_PHYSICAL_PORT) {
memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn));
memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn));
}
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
return;
out:
pmb->context1 = NULL;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
lpfc_issue_clear_la(phba, vport);
mempool_free(pmb, phba->mbox_mem_pool);
return;
}
static void
lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
{
struct lpfc_vport *vport = phba->pport;
LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox;
int i;
struct lpfc_dmabuf *mp;
int rc;
sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
spin_lock_irq(&phba->hbalock);
switch (la->UlnkSpeed) {
case LA_1GHZ_LINK:
phba->fc_linkspeed = LA_1GHZ_LINK;
break;
case LA_2GHZ_LINK:
phba->fc_linkspeed = LA_2GHZ_LINK;
break;
case LA_4GHZ_LINK:
phba->fc_linkspeed = LA_4GHZ_LINK;
break;
case LA_8GHZ_LINK:
phba->fc_linkspeed = LA_8GHZ_LINK;
break;
default:
phba->fc_linkspeed = LA_UNKNW_LINK;
break;
}
phba->fc_topology = la->topology;
phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
if (phba->fc_topology == TOPOLOGY_LOOP) {
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
/* Get Loop Map information */
if (la->il)
vport->fc_flag |= FC_LBIT;
vport->fc_myDID = la->granted_AL_PA;
i = la->un.lilpBde64.tus.f.bdeSize;
if (i == 0) {
phba->alpa_map[0] = 0;
} else {
if (vport->cfg_log_verbose & LOG_LINK_EVENT) {
int numalpa, j, k;
union {
uint8_t pamap[16];
struct {
uint32_t wd1;
uint32_t wd2;
uint32_t wd3;
uint32_t wd4;
} pa;
} un;
numalpa = phba->alpa_map[0];
j = 0;
while (j < numalpa) {
memset(un.pamap, 0, 16);
for (k = 1; j < numalpa; k++) {
un.pamap[k - 1] =
phba->alpa_map[j + 1];
j++;
if (k == 16)
break;
}
/* Link Up Event ALPA map */
lpfc_printf_log(phba,
KERN_WARNING,
LOG_LINK_EVENT,
"1304 Link Up Event "
"ALPA map Data: x%x "
"x%x x%x x%x\n",
un.pa.wd1, un.pa.wd2,
un.pa.wd3, un.pa.wd4);
}
}
}
} else {
if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
if (phba->max_vpi && phba->cfg_enable_npiv &&
(phba->sli_rev == 3))
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
}
vport->fc_myDID = phba->fc_pref_DID;
vport->fc_flag |= FC_LBIT;
}
spin_unlock_irq(&phba->hbalock);
lpfc_linkup(phba);
if (sparam_mbox) {
lpfc_read_sparam(phba, sparam_mbox, 0);
sparam_mbox->vport = vport;
sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam;
rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
mp = (struct lpfc_dmabuf *) sparam_mbox->context1;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(sparam_mbox, phba->mbox_mem_pool);
if (cfglink_mbox)
mempool_free(cfglink_mbox, phba->mbox_mem_pool);
goto out;
}
}
if (cfglink_mbox) {
vport->port_state = LPFC_LOCAL_CFG_LINK;
lpfc_config_link(phba, cfglink_mbox);
cfglink_mbox->vport = vport;
cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
if (rc != MBX_NOT_FINISHED)
return;
mempool_free(cfglink_mbox, phba->mbox_mem_pool);
}
out:
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"0263 Discovery Mailbox error: state: 0x%x : %p %p\n",
vport->port_state, sparam_mbox, cfglink_mbox);
lpfc_issue_clear_la(phba, vport);
return;
}
static void
lpfc_mbx_issue_link_down(struct lpfc_hba *phba)
{
uint32_t control;
struct lpfc_sli *psli = &phba->sli;
lpfc_linkdown(phba);
/* turn on Link Attention interrupts - no CLEAR_LA needed */
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_PROCESS_LA;
control = readl(phba->HCregaddr);
control |= HC_LAINT_ENA;
writel(control, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
spin_unlock_irq(&phba->hbalock);
}
/*
* This routine handles processing a READ_LA mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
* as the completion routine when the command is
* handed off to the SLI layer.
*/
void
lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
READ_LA_VAR *la;
MAILBOX_t *mb = &pmb->mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
/* Unblock ELS traffic */
phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
/* Check for error */
if (mb->mbxStatus) {
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
"1307 READ_LA mbox error x%x state x%x\n",
mb->mbxStatus, vport->port_state);
lpfc_mbx_issue_link_down(phba);
phba->link_state = LPFC_HBA_ERROR;
goto lpfc_mbx_cmpl_read_la_free_mbuf;
}
la = (READ_LA_VAR *) & pmb->mb.un.varReadLA;
memcpy(&phba->alpa_map[0], mp->virt, 128);
spin_lock_irq(shost->host_lock);
if (la->pb)
vport->fc_flag |= FC_BYPASSED_MODE;
else
vport->fc_flag &= ~FC_BYPASSED_MODE;
spin_unlock_irq(shost->host_lock);
if (((phba->fc_eventTag + 1) < la->eventTag) ||
(phba->fc_eventTag == la->eventTag)) {
phba->fc_stat.LinkMultiEvent++;
if (la->attType == AT_LINK_UP)
if (phba->fc_eventTag != 0)
lpfc_linkdown(phba);
}
phba->fc_eventTag = la->eventTag;
if (la->attType == AT_LINK_UP) {
phba->fc_stat.LinkUp++;
if (phba->link_flag & LS_LOOPBACK_MODE) {
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1306 Link Up Event in loop back mode "
"x%x received Data: x%x x%x x%x x%x\n",
la->eventTag, phba->fc_eventTag,
la->granted_AL_PA, la->UlnkSpeed,
phba->alpa_map[0]);
} else {
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1303 Link Up Event x%x received "
"Data: x%x x%x x%x x%x\n",
la->eventTag, phba->fc_eventTag,
la->granted_AL_PA, la->UlnkSpeed,
phba->alpa_map[0]);
}
lpfc_mbx_process_link_up(phba, la);
} else {
phba->fc_stat.LinkDown++;
if (phba->link_flag & LS_LOOPBACK_MODE) {
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1308 Link Down Event in loop back mode "
"x%x received "
"Data: x%x x%x x%x\n",
la->eventTag, phba->fc_eventTag,
phba->pport->port_state, vport->fc_flag);
}
else {
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1305 Link Down Event x%x received "
"Data: x%x x%x x%x\n",
la->eventTag, phba->fc_eventTag,
phba->pport->port_state, vport->fc_flag);
}
lpfc_mbx_issue_link_down(phba);
}
lpfc_mbx_cmpl_read_la_free_mbuf:
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
return;
}
/*
* This routine handles processing a REG_LOGIN mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
* as the completion routine when the command is
* handed off to the SLI layer.
*/
void
lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
pmb->context1 = NULL;
/* Good status, call state machine */
lpfc_disc_state_machine(vport, ndlp, pmb, NLP_EVT_CMPL_REG_LOGIN);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
/* decrement the node reference count held for this callback
* function.
*/
lpfc_nlp_put(ndlp);
return;
}
static void
lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t *mb = &pmb->mb;
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
switch (mb->mbxStatus) {
case 0x0011:
case 0x0020:
case 0x9700:
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"0911 cmpl_unreg_vpi, mb status = 0x%x\n",
mb->mbxStatus);
break;
}
vport->unreg_vpi_cmpl = VPORT_OK;
mempool_free(pmb, phba->mbox_mem_pool);
/*
* This shost reference might have been taken at the beginning of
* lpfc_vport_delete()
*/
if (vport->load_flag & FC_UNLOADING)
scsi_host_put(shost);
}
void
lpfc_mbx_unreg_vpi(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mbox;
int rc;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
return;
lpfc_unreg_vpi(phba, vport->vpi, mbox);
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
"1800 Could not issue unreg_vpi\n");
mempool_free(mbox, phba->mbox_mem_pool);
vport->unreg_vpi_cmpl = VPORT_ERROR;
}
}
static void
lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
MAILBOX_t *mb = &pmb->mb;
switch (mb->mbxStatus) {
case 0x0011:
case 0x9601:
case 0x9602:
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"0912 cmpl_reg_vpi, mb status = 0x%x\n",
mb->mbxStatus);
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
spin_unlock_irq(shost->host_lock);
vport->fc_myDID = 0;
goto out;
}
vport->num_disc_nodes = 0;
/* go thru NPR list and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
lpfc_els_disc_plogi(vport);
if (!vport->num_disc_nodes) {
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_NDISC_ACTIVE;
spin_unlock_irq(shost->host_lock);
lpfc_can_disctmo(vport);
}
vport->port_state = LPFC_VPORT_READY;
out:
mempool_free(pmb, phba->mbox_mem_pool);
return;
}
/*
* This routine handles processing a Fabric REG_LOGIN mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
* as the completion routine when the command is
* handed off to the SLI layer.
*/
void
lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
MAILBOX_t *mb = &pmb->mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp;
struct lpfc_vport **vports;
int i;
ndlp = (struct lpfc_nodelist *) pmb->context2;
pmb->context1 = NULL;
pmb->context2 = NULL;
if (mb->mbxStatus) {
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
if (phba->fc_topology == TOPOLOGY_LOOP) {
/* FLOGI failed, use loop map to make discovery list */
lpfc_disc_list_loopmap(vport);
/* Start discovery */
lpfc_disc_start(vport);
/* Decrement the reference count to ndlp after the
* reference to the ndlp are done.
*/
lpfc_nlp_put(ndlp);
return;
}
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"0258 Register Fabric login error: 0x%x\n",
mb->mbxStatus);
/* Decrement the reference count to ndlp after the reference
* to the ndlp are done.
*/
lpfc_nlp_put(ndlp);
return;
}
ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for(i = 0;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
i <= phba->max_vpi && vports[i] != NULL;
i++) {
if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
continue;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (phba->fc_topology == TOPOLOGY_LOOP) {
lpfc_vport_set_state(vports[i],
FC_VPORT_LINKDOWN);
continue;
}
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
lpfc_initial_fdisc(vports[i]);
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
else {
lpfc_vport_set_state(vports[i],
FC_VPORT_NO_FABRIC_SUPP);
lpfc_printf_vlog(vport, KERN_ERR,
LOG_ELS,
"0259 No NPIV "
"Fabric support\n");
}
}
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
lpfc_destroy_vport_work_array(phba, vports);
lpfc_do_scr_ns_plogi(phba, vport);
}
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
/* Drop the reference count from the mbox at the end after
* all the current reference to the ndlp have been done.
*/
lpfc_nlp_put(ndlp);
return;
}
/*
* This routine handles processing a NameServer REG_LOGIN mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
* as the completion routine when the command is
* handed off to the SLI layer.
*/
void
lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t *mb = &pmb->mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
struct lpfc_vport *vport = pmb->vport;
if (mb->mbxStatus) {
out:
/* decrement the node reference count held for this
* callback function.
*/
lpfc_nlp_put(ndlp);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
/* If no other thread is using the ndlp, free it */
lpfc_nlp_not_used(ndlp);
if (phba->fc_topology == TOPOLOGY_LOOP) {
/*
* RegLogin failed, use loop map to make discovery
* list
*/
lpfc_disc_list_loopmap(vport);
/* Start discovery */
lpfc_disc_start(vport);
return;
}
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0260 Register NameServer error: 0x%x\n",
mb->mbxStatus);
return;
}
pmb->context1 = NULL;
ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
if (vport->port_state < LPFC_VPORT_READY) {
/* Link up discovery requires Fabric registration. */
lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, 0); /* Do this first! */
lpfc_ns_cmd(vport, SLI_CTNS_RNN_ID, 0, 0);
lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0);
lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
lpfc_ns_cmd(vport, SLI_CTNS_RFT_ID, 0, 0);
/* Issue SCR just before NameServer GID_FT Query */
lpfc_issue_els_scr(vport, SCR_DID, 0);
}
vport->fc_ns_retry = 0;
/* Good status, issue CT Request to NameServer */
if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, 0)) {
/* Cannot issue NameServer Query, so finish up discovery */
goto out;
}
/* decrement the node reference count held for this
* callback function.
*/
lpfc_nlp_put(ndlp);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
return;
}
static void
lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct fc_rport *rport;
struct lpfc_rport_data *rdata;
struct fc_rport_identifiers rport_ids;
struct lpfc_hba *phba = vport->phba;
/* Remote port has reappeared. Re-register w/ FC transport */
rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
rport_ids.port_id = ndlp->nlp_DID;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
/*
* We leave our node pointer in rport->dd_data when we unregister a
* FCP target port. But fc_remote_port_add zeros the space to which
* rport->dd_data points. So, if we're reusing a previously
* registered port, drop the reference that we took the last time we
* registered the port.
*/
if (ndlp->rport && ndlp->rport->dd_data &&
((struct lpfc_rport_data *) ndlp->rport->dd_data)->pnode == ndlp)
lpfc_nlp_put(ndlp);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
"rport add: did:x%x flg:x%x type x%x",
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids);
if (!rport || !get_device(&rport->dev)) {
dev_printk(KERN_WARNING, &phba->pcidev->dev,
"Warning: fc_remote_port_add failed\n");
return;
}
/* initialize static port data */
rport->maxframe_size = ndlp->nlp_maxframe;
rport->supported_classes = ndlp->nlp_class_sup;
rdata = rport->dd_data;
rdata->pnode = lpfc_nlp_get(ndlp);
if (ndlp->nlp_type & NLP_FCP_TARGET)
rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
if (ndlp->nlp_type & NLP_FCP_INITIATOR)
rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
fc_remote_port_rolechg(rport, rport_ids.roles);
if ((rport->scsi_target_id != -1) &&
(rport->scsi_target_id < LPFC_MAX_TARGET)) {
ndlp->nlp_sid = rport->scsi_target_id;
}
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
return;
}
static void
lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp)
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
{
struct fc_rport *rport = ndlp->rport;
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
"rport delete: did:x%x flg:x%x type x%x",
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
fc_remote_port_delete(rport);
return;
}
static void
lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
switch (state) {
case NLP_STE_UNUSED_NODE:
vport->fc_unused_cnt += count;
break;
case NLP_STE_PLOGI_ISSUE:
vport->fc_plogi_cnt += count;
break;
case NLP_STE_ADISC_ISSUE:
vport->fc_adisc_cnt += count;
break;
case NLP_STE_REG_LOGIN_ISSUE:
vport->fc_reglogin_cnt += count;
break;
case NLP_STE_PRLI_ISSUE:
vport->fc_prli_cnt += count;
break;
case NLP_STE_UNMAPPED_NODE:
vport->fc_unmap_cnt += count;
break;
case NLP_STE_MAPPED_NODE:
vport->fc_map_cnt += count;
break;
case NLP_STE_NPR_NODE:
vport->fc_npr_cnt += count;
break;
}
spin_unlock_irq(shost->host_lock);
}
static void
lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
int old_state, int new_state)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if (new_state == NLP_STE_UNMAPPED_NODE) {
ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
ndlp->nlp_flag &= ~NLP_NODEV_REMOVE;
ndlp->nlp_type |= NLP_FC_NODE;
}
if (new_state == NLP_STE_MAPPED_NODE)
ndlp->nlp_flag &= ~NLP_NODEV_REMOVE;
if (new_state == NLP_STE_NPR_NODE)
ndlp->nlp_flag &= ~NLP_RCV_PLOGI;
/* Transport interface */
if (ndlp->rport && (old_state == NLP_STE_MAPPED_NODE ||
old_state == NLP_STE_UNMAPPED_NODE)) {
vport->phba->nport_event_cnt++;
lpfc_unregister_remote_port(ndlp);
}
if (new_state == NLP_STE_MAPPED_NODE ||
new_state == NLP_STE_UNMAPPED_NODE) {
vport->phba->nport_event_cnt++;
/*
* Tell the fc transport about the port, if we haven't
* already. If we have, and it's a scsi entity, be
* sure to unblock any attached scsi devices
*/
lpfc_register_remote_port(vport, ndlp);
}
/*
* if we added to Mapped list, but the remote port
* registration failed or assigned a target id outside
* our presentable range - move the node to the
* Unmapped List
*/
if (new_state == NLP_STE_MAPPED_NODE &&
(!ndlp->rport ||
ndlp->rport->scsi_target_id == -1 ||
ndlp->rport->scsi_target_id >= LPFC_MAX_TARGET)) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_TGT_NO_SCSIID;
spin_unlock_irq(shost->host_lock);
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
}
}
static char *
lpfc_nlp_state_name(char *buffer, size_t size, int state)
{
static char *states[] = {
[NLP_STE_UNUSED_NODE] = "UNUSED",
[NLP_STE_PLOGI_ISSUE] = "PLOGI",
[NLP_STE_ADISC_ISSUE] = "ADISC",
[NLP_STE_REG_LOGIN_ISSUE] = "REGLOGIN",
[NLP_STE_PRLI_ISSUE] = "PRLI",
[NLP_STE_UNMAPPED_NODE] = "UNMAPPED",
[NLP_STE_MAPPED_NODE] = "MAPPED",
[NLP_STE_NPR_NODE] = "NPR",
};
if (state < NLP_STE_MAX_STATE && states[state])
strlcpy(buffer, states[state], size);
else
snprintf(buffer, size, "unknown (%d)", state);
return buffer;
}
void
lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
int state)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
int old_state = ndlp->nlp_state;
char name1[16], name2[16];
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"0904 NPort state transition x%06x, %s -> %s\n",
ndlp->nlp_DID,
lpfc_nlp_state_name(name1, sizeof(name1), old_state),
lpfc_nlp_state_name(name2, sizeof(name2), state));
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
"node statechg did:x%x old:%d ste:%d",
ndlp->nlp_DID, old_state, state);
if (old_state == NLP_STE_NPR_NODE &&
state != NLP_STE_NPR_NODE)
lpfc_cancel_retry_delay_tmo(vport, ndlp);
if (old_state == NLP_STE_UNMAPPED_NODE) {
ndlp->nlp_flag &= ~NLP_TGT_NO_SCSIID;
ndlp->nlp_type &= ~NLP_FC_NODE;
}
if (list_empty(&ndlp->nlp_listp)) {
spin_lock_irq(shost->host_lock);
list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes);
spin_unlock_irq(shost->host_lock);
} else if (old_state)
lpfc_nlp_counters(vport, old_state, -1);
ndlp->nlp_state = state;
lpfc_nlp_counters(vport, state, 1);
lpfc_nlp_state_cleanup(vport, ndlp, old_state, state);
}
void
lpfc_enqueue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if (list_empty(&ndlp->nlp_listp)) {
spin_lock_irq(shost->host_lock);
list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes);
spin_unlock_irq(shost->host_lock);
}
}
void
lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
lpfc_cancel_retry_delay_tmo(vport, ndlp);
if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp))
lpfc_nlp_counters(vport, ndlp->nlp_state, -1);
spin_lock_irq(shost->host_lock);
list_del_init(&ndlp->nlp_listp);
spin_unlock_irq(shost->host_lock);
lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state,
NLP_STE_UNUSED_NODE);
}
static void
lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
lpfc_cancel_retry_delay_tmo(vport, ndlp);
if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp))
lpfc_nlp_counters(vport, ndlp->nlp_state, -1);
lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state,
NLP_STE_UNUSED_NODE);
}
struct lpfc_nodelist *
lpfc_enable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
int state)
{
struct lpfc_hba *phba = vport->phba;
uint32_t did;
unsigned long flags;
if (!ndlp)
return NULL;
spin_lock_irqsave(&phba->ndlp_lock, flags);
/* The ndlp should not be in memory free mode */
if (NLP_CHK_FREE_REQ(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
"0277 lpfc_enable_node: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
return NULL;
}
/* The ndlp should not already be in active mode */
if (NLP_CHK_NODE_ACT(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
"0278 lpfc_enable_node: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
return NULL;
}
/* Keep the original DID */
did = ndlp->nlp_DID;
/* re-initialize ndlp except of ndlp linked list pointer */
memset((((char *)ndlp) + sizeof (struct list_head)), 0,
sizeof (struct lpfc_nodelist) - sizeof (struct list_head));
INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp);
INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp);
init_timer(&ndlp->nlp_delayfunc);
ndlp->nlp_delayfunc.function = lpfc_els_retry_delay;
ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
ndlp->nlp_DID = did;
ndlp->vport = vport;
ndlp->nlp_sid = NLP_NO_SID;
/* ndlp management re-initialize */
kref_init(&ndlp->kref);
NLP_INT_NODE_ACT(ndlp);
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
if (state != NLP_STE_UNUSED_NODE)
lpfc_nlp_set_state(vport, ndlp, state);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
"node enable: did:x%x",
ndlp->nlp_DID, 0, 0);
return ndlp;
}
void
lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
/*
* Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should
* be used if we wish to issue the "last" lpfc_nlp_put() to remove
* the ndlp from the vport. The ndlp marked as UNUSED on the list
* until ALL other outstanding threads have completed. We check
* that the ndlp not already in the UNUSED state before we proceed.
*/
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
return;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE);
lpfc_nlp_put(ndlp);
return;
}
/*
* Start / ReStart rescue timer for Discovery / RSCN handling
*/
void
lpfc_set_disctmo(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
uint32_t tmo;
if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
/* For FAN, timeout should be greater then edtov */
tmo = (((phba->fc_edtov + 999) / 1000) + 1);
} else {
/* Normal discovery timeout should be > then ELS/CT timeout
* FC spec states we need 3 * ratov for CT requests
*/
tmo = ((phba->fc_ratov * 3) + 3);
}
if (!timer_pending(&vport->fc_disctmo)) {
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"set disc timer: tmo:x%x state:x%x flg:x%x",
tmo, vport->port_state, vport->fc_flag);
}
mod_timer(&vport->fc_disctmo, jiffies + HZ * tmo);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_DISC_TMO;
spin_unlock_irq(shost->host_lock);
/* Start Discovery Timer state <hba_state> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0247 Start Discovery Timer state x%x "
"Data: x%x x%lx x%x x%x\n",
vport->port_state, tmo,
(unsigned long)&vport->fc_disctmo, vport->fc_plogi_cnt,
vport->fc_adisc_cnt);
return;
}
/*
* Cancel rescue timer for Discovery / RSCN handling
*/
int
lpfc_can_disctmo(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
unsigned long iflags;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"can disc timer: state:x%x rtry:x%x flg:x%x",
vport->port_state, vport->fc_ns_retry, vport->fc_flag);
/* Turn off discovery timer if its running */
if (vport->fc_flag & FC_DISC_TMO) {
spin_lock_irqsave(shost->host_lock, iflags);
vport->fc_flag &= ~FC_DISC_TMO;
spin_unlock_irqrestore(shost->host_lock, iflags);
del_timer_sync(&vport->fc_disctmo);
spin_lock_irqsave(&vport->work_port_lock, iflags);
vport->work_port_events &= ~WORKER_DISC_TMO;
spin_unlock_irqrestore(&vport->work_port_lock, iflags);
}
/* Cancel Discovery Timer state <hba_state> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0248 Cancel Discovery Timer state x%x "
"Data: x%x x%x x%x\n",
vport->port_state, vport->fc_flag,
vport->fc_plogi_cnt, vport->fc_adisc_cnt);
return 0;
}
/*
* Check specified ring for outstanding IOCB on the SLI queue
* Return true if iocb matches the specified nport
*/
int
lpfc_check_sli_ndlp(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring,
struct lpfc_iocbq *iocb,
struct lpfc_nodelist *ndlp)
{
struct lpfc_sli *psli = &phba->sli;
IOCB_t *icmd = &iocb->iocb;
struct lpfc_vport *vport = ndlp->vport;
if (iocb->vport != vport)
return 0;
if (pring->ringno == LPFC_ELS_RING) {
switch (icmd->ulpCommand) {
case CMD_GEN_REQUEST64_CR:
if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
return 1;
case CMD_ELS_REQUEST64_CR:
if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
return 1;
case CMD_XMIT_ELS_RSP64_CX:
if (iocb->context1 == (uint8_t *) ndlp)
return 1;
}
} else if (pring->ringno == psli->extra_ring) {
} else if (pring->ringno == psli->fcp_ring) {
/* Skip match check if waiting to relogin to FCP target */
if ((ndlp->nlp_type & NLP_FCP_TARGET) &&
(ndlp->nlp_flag & NLP_DELAY_TMO)) {
return 0;
}
if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi) {
return 1;
}
} else if (pring->ringno == psli->next_ring) {
}
return 0;
}
/*
* Free resources / clean up outstanding I/Os
* associated with nlp_rpi in the LPFC_NODELIST entry.
*/
static int
lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
{
LIST_HEAD(completions);
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *iocb, *next_iocb;
IOCB_t *icmd;
uint32_t rpi, i;
lpfc_fabric_abort_nport(ndlp);
/*
* Everything that matches on txcmplq will be returned
* by firmware with a no rpi error.
*/
psli = &phba->sli;
rpi = ndlp->nlp_rpi;
if (rpi) {
/* Now process each ring */
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(iocb, next_iocb, &pring->txq,
list) {
/*
* Check to see if iocb matches the nport we are
* looking for
*/
if ((lpfc_check_sli_ndlp(phba, pring, iocb,
ndlp))) {
/* It matches, so deque and call compl
with an error */
list_move_tail(&iocb->list,
&completions);
pring->txq_cnt--;
}
}
spin_unlock_irq(&phba->hbalock);
}
}
while (!list_empty(&completions)) {
iocb = list_get_first(&completions, struct lpfc_iocbq, list);
list_del_init(&iocb->list);
if (!iocb->iocb_cmpl)
lpfc_sli_release_iocbq(phba, iocb);
else {
icmd = &iocb->iocb;
icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
(iocb->iocb_cmpl)(phba, iocb, iocb);
}
}
return 0;
}
/*
* Free rpi associated with LPFC_NODELIST entry.
* This routine is called from lpfc_freenode(), when we are removing
* a LPFC_NODELIST entry. It is also called if the driver initiates a
* LOGO that completes successfully, and we are waiting to PLOGI back
* to the remote NPort. In addition, it is called after we receive
* and unsolicated ELS cmd, send back a rsp, the rsp completes and
* we are waiting to PLOGI back to the remote NPort.
*/
int
lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mbox;
int rc;
if (ndlp->nlp_rpi) {
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED)
mempool_free(mbox, phba->mbox_mem_pool);
}
lpfc_no_rpi(phba, ndlp);
ndlp->nlp_rpi = 0;
return 1;
}
return 0;
}
void
lpfc_unreg_all_rpis(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mbox;
int rc;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
lpfc_unreg_login(phba, vport->vpi, 0xffff, mbox);
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
if (rc == MBX_NOT_FINISHED) {
mempool_free(mbox, phba->mbox_mem_pool);
}
}
}
void
lpfc_unreg_default_rpis(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mbox;
int rc;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
lpfc_unreg_did(phba, vport->vpi, 0xffffffff, mbox);
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
if (rc == MBX_NOT_FINISHED) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
"1815 Could not issue "
"unreg_did (default rpis)\n");
mempool_free(mbox, phba->mbox_mem_pool);
}
}
}
/*
* Free resources associated with LPFC_NODELIST entry
* so it can be freed.
*/
static int
lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mb, *nextmb;
struct lpfc_dmabuf *mp;
/* Cleanup node for NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"0900 Cleanup node for NPort x%x "
"Data: x%x x%x x%x\n",
ndlp->nlp_DID, ndlp->nlp_flag,
ndlp->nlp_state, ndlp->nlp_rpi);
if (NLP_CHK_FREE_REQ(ndlp)) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
"0280 lpfc_cleanup_node: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
lpfc_dequeue_node(vport, ndlp);
} else {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
"0281 lpfc_cleanup_node: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
lpfc_disable_node(vport, ndlp);
}
/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
if ((mb = phba->sli.mbox_active)) {
if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mb->context2 = NULL;
mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
}
}
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mp = (struct lpfc_dmabuf *) (mb->context1);
if (mp) {
__lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
}
list_del(&mb->list);
mempool_free(mb, phba->mbox_mem_pool);
/* We shall not invoke the lpfc_nlp_put to decrement
* the ndlp reference count as we are in the process
* of lpfc_nlp_release.
*/
}
}
spin_unlock_irq(&phba->hbalock);
lpfc_els_abort(phba, ndlp);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_DELAY_TMO;
spin_unlock_irq(shost->host_lock);
ndlp->nlp_last_elscmd = 0;
del_timer_sync(&ndlp->nlp_delayfunc);
list_del_init(&ndlp->els_retry_evt.evt_listp);
list_del_init(&ndlp->dev_loss_evt.evt_listp);
lpfc_unreg_rpi(vport, ndlp);
return 0;
}
/*
* Check to see if we can free the nlp back to the freelist.
* If we are in the middle of using the nlp in the discovery state
* machine, defer the free till we reach the end of the state machine.
*/
static void
lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_rport_data *rdata;
LPFC_MBOXQ_t *mbox;
int rc;
lpfc_cancel_retry_delay_tmo(vport, ndlp);
if (ndlp->nlp_flag & NLP_DEFER_RM && !ndlp->nlp_rpi) {
/* For this case we need to cleanup the default rpi
* allocated by the firmware.
*/
if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
!= NULL) {
rc = lpfc_reg_login(phba, vport->vpi, ndlp->nlp_DID,
(uint8_t *) &vport->fc_sparam, mbox, 0);
if (rc) {
mempool_free(mbox, phba->mbox_mem_pool);
}
else {
mbox->mbox_flag |= LPFC_MBX_IMED_UNREG;
mbox->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
mbox->vport = vport;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
mbox->context2 = NULL;
rc =lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
mempool_free(mbox, phba->mbox_mem_pool);
}
}
}
}
lpfc_cleanup_node(vport, ndlp);
/*
* We can get here with a non-NULL ndlp->rport because when we
* unregister a rport we don't break the rport/node linkage. So if we
* do, make sure we don't leaving any dangling pointers behind.
*/
if (ndlp->rport) {
rdata = ndlp->rport->dd_data;
rdata->pnode = NULL;
ndlp->rport = NULL;
}
}
static int
lpfc_matchdid(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint32_t did)
{
D_ID mydid, ndlpdid, matchdid;
if (did == Bcast_DID)
return 0;
/* First check for Direct match */
if (ndlp->nlp_DID == did)
return 1;
/* Next check for area/domain identically equals 0 match */
mydid.un.word = vport->fc_myDID;
if ((mydid.un.b.domain == 0) && (mydid.un.b.area == 0)) {
return 0;
}
matchdid.un.word = did;
ndlpdid.un.word = ndlp->nlp_DID;
if (matchdid.un.b.id == ndlpdid.un.b.id) {
if ((mydid.un.b.domain == matchdid.un.b.domain) &&
(mydid.un.b.area == matchdid.un.b.area)) {
if ((ndlpdid.un.b.domain == 0) &&
(ndlpdid.un.b.area == 0)) {
if (ndlpdid.un.b.id)
return 1;
}
return 0;
}
matchdid.un.word = ndlp->nlp_DID;
if ((mydid.un.b.domain == ndlpdid.un.b.domain) &&
(mydid.un.b.area == ndlpdid.un.b.area)) {
if ((matchdid.un.b.domain == 0) &&
(matchdid.un.b.area == 0)) {
if (matchdid.un.b.id)
return 1;
}
}
}
return 0;
}
/* Search for a nodelist entry */
static struct lpfc_nodelist *
__lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
{
struct lpfc_nodelist *ndlp;
uint32_t data1;
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (lpfc_matchdid(vport, ndlp, did)) {
data1 = (((uint32_t) ndlp->nlp_state << 24) |
((uint32_t) ndlp->nlp_xri << 16) |
((uint32_t) ndlp->nlp_type << 8) |
((uint32_t) ndlp->nlp_rpi & 0xff));
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"0929 FIND node DID "
"Data: x%p x%x x%x x%x\n",
ndlp, ndlp->nlp_DID,
ndlp->nlp_flag, data1);
return ndlp;
}
}
/* FIND node did <did> NOT FOUND */
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"0932 FIND node did x%x NOT FOUND.\n", did);
return NULL;
}
struct lpfc_nodelist *
lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp;
spin_lock_irq(shost->host_lock);
ndlp = __lpfc_findnode_did(vport, did);
spin_unlock_irq(shost->host_lock);
return ndlp;
}
struct lpfc_nodelist *
lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp;
ndlp = lpfc_findnode_did(vport, did);
if (!ndlp) {
if ((vport->fc_flag & FC_RSCN_MODE) != 0 &&
lpfc_rscn_payload_check(vport, did) == 0)
return NULL;
ndlp = (struct lpfc_nodelist *)
mempool_alloc(vport->phba->nlp_mem_pool, GFP_KERNEL);
if (!ndlp)
return NULL;
lpfc_nlp_init(vport, ndlp, did);
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
return ndlp;
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_NPR_NODE);
if (!ndlp)
return NULL;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
return ndlp;
}
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if ((vport->fc_flag & FC_RSCN_MODE) &&
!(vport->fc_flag & FC_NDISC_ACTIVE)) {
if (lpfc_rscn_payload_check(vport, did)) {
/* If we've already recieved a PLOGI from this NPort
* we don't need to try to discover it again.
*/
if (ndlp->nlp_flag & NLP_RCV_PLOGI)
return NULL;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
/* Since this node is marked for discovery,
* delay timeout is not needed.
*/
lpfc_cancel_retry_delay_tmo(vport, ndlp);
} else
ndlp = NULL;
} else {
/* If we've already recieved a PLOGI from this NPort,
* or we are already in the process of discovery on it,
* we don't need to try to discover it again.
*/
if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE ||
ndlp->nlp_state == NLP_STE_PLOGI_ISSUE ||
ndlp->nlp_flag & NLP_RCV_PLOGI)
return NULL;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
}
return ndlp;
}
/* Build a list of nodes to discover based on the loopmap */
void
lpfc_disc_list_loopmap(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
int j;
uint32_t alpa, index;
if (!lpfc_is_link_up(phba))
return;
if (phba->fc_topology != TOPOLOGY_LOOP)
return;
/* Check for loop map present or not */
if (phba->alpa_map[0]) {
for (j = 1; j <= phba->alpa_map[0]; j++) {
alpa = phba->alpa_map[j];
if (((vport->fc_myDID & 0xff) == alpa) || (alpa == 0))
continue;
lpfc_setup_disc_node(vport, alpa);
}
} else {
/* No alpamap, so try all alpa's */
for (j = 0; j < FC_MAXLOOP; j++) {
/* If cfg_scan_down is set, start from highest
* ALPA (0xef) to lowest (0x1).
*/
if (vport->cfg_scan_down)
index = j;
else
index = FC_MAXLOOP - j - 1;
alpa = lpfcAlpaArray[index];
if ((vport->fc_myDID & 0xff) == alpa)
continue;
lpfc_setup_disc_node(vport, alpa);
}
}
return;
}
void
lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
{
LPFC_MBOXQ_t *mbox;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *extra_ring = &psli->ring[psli->extra_ring];
struct lpfc_sli_ring *fcp_ring = &psli->ring[psli->fcp_ring];
struct lpfc_sli_ring *next_ring = &psli->ring[psli->next_ring];
int rc;
/*
* if it's not a physical port or if we already send
* clear_la then don't send it.
*/
if ((phba->link_state >= LPFC_CLEAR_LA) ||
(vport->port_type != LPFC_PHYSICAL_PORT))
return;
/* Link up discovery */
if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) != NULL) {
phba->link_state = LPFC_CLEAR_LA;
lpfc_clear_la(phba, mbox);
mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la;
mbox->vport = vport;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
mempool_free(mbox, phba->mbox_mem_pool);
lpfc_disc_flush_list(vport);
extra_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
fcp_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
next_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
phba->link_state = LPFC_HBA_ERROR;
}
}
}
/* Reg_vpi to tell firmware to resume normal operations */
void
lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
{
LPFC_MBOXQ_t *regvpimbox;
regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (regvpimbox) {
lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
regvpimbox->vport = vport;
if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
== MBX_NOT_FINISHED) {
mempool_free(regvpimbox, phba->mbox_mem_pool);
}
}
}
/* Start Link up / RSCN discovery on NPR nodes */
void
lpfc_disc_start(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
uint32_t num_sent;
uint32_t clear_la_pending;
int did_changed;
if (!lpfc_is_link_up(phba))
return;
if (phba->link_state == LPFC_CLEAR_LA)
clear_la_pending = 1;
else
clear_la_pending = 0;
if (vport->port_state < LPFC_VPORT_READY)
vport->port_state = LPFC_DISC_AUTH;
lpfc_set_disctmo(vport);
if (vport->fc_prevDID == vport->fc_myDID)
did_changed = 0;
else
did_changed = 1;
vport->fc_prevDID = vport->fc_myDID;
vport->num_disc_nodes = 0;
/* Start Discovery state <hba_state> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0202 Start Discovery hba state x%x "
"Data: x%x x%x x%x\n",
vport->port_state, vport->fc_flag, vport->fc_plogi_cnt,
vport->fc_adisc_cnt);
/* First do ADISCs - if any */
num_sent = lpfc_els_disc_adisc(vport);
if (num_sent)
return;
/*
* For SLI3, cmpl_reg_vpi will set port_state to READY, and
* continue discovery.
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
!(vport->fc_flag & FC_PT2PT) &&
!(vport->fc_flag & FC_RSCN_MODE)) {
lpfc_issue_reg_vpi(phba, vport);
return;
}
/*
* For SLI2, we need to set port_state to READY and continue
* discovery.
*/
if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) {
/* If we get here, there is nothing to ADISC */
if (vport->port_type == LPFC_PHYSICAL_PORT)
lpfc_issue_clear_la(phba, vport);
if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
vport->num_disc_nodes = 0;
/* go thru NPR nodes and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
lpfc_els_disc_plogi(vport);
if (!vport->num_disc_nodes) {
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_NDISC_ACTIVE;
spin_unlock_irq(shost->host_lock);
lpfc_can_disctmo(vport);
}
}
vport->port_state = LPFC_VPORT_READY;
} else {
/* Next do PLOGIs - if any */
num_sent = lpfc_els_disc_plogi(vport);
if (num_sent)
return;
if (vport->fc_flag & FC_RSCN_MODE) {
/* Check to see if more RSCNs came in while we
* were processing this one.
*/
if ((vport->fc_rscn_id_cnt == 0) &&
(!(vport->fc_flag & FC_RSCN_DISCOVERY))) {
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_RSCN_MODE;
spin_unlock_irq(shost->host_lock);
lpfc_can_disctmo(vport);
} else
lpfc_els_handle_rscn(vport);
}
}
return;
}
/*
* Ignore completion for all IOCBs on tx and txcmpl queue for ELS
* ring the match the sppecified nodelist.
*/
static void
lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
{
LIST_HEAD(completions);
struct lpfc_sli *psli;
IOCB_t *icmd;
struct lpfc_iocbq *iocb, *next_iocb;
struct lpfc_sli_ring *pring;
psli = &phba->sli;
pring = &psli->ring[LPFC_ELS_RING];
/* Error matching iocb on txq or txcmplq
* First check the txq.
*/
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
if (iocb->context1 != ndlp) {
continue;
}
icmd = &iocb->iocb;
if ((icmd->ulpCommand == CMD_ELS_REQUEST64_CR) ||
(icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX)) {
list_move_tail(&iocb->list, &completions);
pring->txq_cnt--;
}
}
/* Next check the txcmplq */
list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
if (iocb->context1 != ndlp) {
continue;
}
icmd = &iocb->iocb;
if (icmd->ulpCommand == CMD_ELS_REQUEST64_CR ||
icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX) {
lpfc_sli_issue_abort_iotag(phba, pring, iocb);
}
}
spin_unlock_irq(&phba->hbalock);
while (!list_empty(&completions)) {
iocb = list_get_first(&completions, struct lpfc_iocbq, list);
list_del_init(&iocb->list);
if (!iocb->iocb_cmpl)
lpfc_sli_release_iocbq(phba, iocb);
else {
icmd = &iocb->iocb;
icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
(iocb->iocb_cmpl) (phba, iocb, iocb);
}
}
}
static void
lpfc_disc_flush_list(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp, *next_ndlp;
struct lpfc_hba *phba = vport->phba;
if (vport->fc_plogi_cnt || vport->fc_adisc_cnt) {
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes,
nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE ||
ndlp->nlp_state == NLP_STE_ADISC_ISSUE) {
lpfc_free_tx(phba, ndlp);
}
}
}
}
void
lpfc_cleanup_discovery_resources(struct lpfc_vport *vport)
{
lpfc_els_flush_rscn(vport);
lpfc_els_flush_cmd(vport);
lpfc_disc_flush_list(vport);
}
/*****************************************************************************/
/*
* NAME: lpfc_disc_timeout
*
* FUNCTION: Fibre Channel driver discovery timeout routine.
*
* EXECUTION ENVIRONMENT: interrupt only
*
* CALLED FROM:
* Timer function
*
* RETURNS:
* none
*/
/*****************************************************************************/
void
lpfc_disc_timeout(unsigned long ptr)
{
struct lpfc_vport *vport = (struct lpfc_vport *) ptr;
struct lpfc_hba *phba = vport->phba;
uint32_t tmo_posted;
unsigned long flags = 0;
if (unlikely(!phba))
return;
spin_lock_irqsave(&vport->work_port_lock, flags);
tmo_posted = vport->work_port_events & WORKER_DISC_TMO;
if (!tmo_posted)
vport->work_port_events |= WORKER_DISC_TMO;
spin_unlock_irqrestore(&vport->work_port_lock, flags);
if (!tmo_posted)
lpfc_worker_wake_up(phba);
return;
}
static void
lpfc_disc_timeout_handler(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_nodelist *ndlp, *next_ndlp;
LPFC_MBOXQ_t *initlinkmbox;
int rc, clrlaerr = 0;
if (!(vport->fc_flag & FC_DISC_TMO))
return;
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_DISC_TMO;
spin_unlock_irq(shost->host_lock);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"disc timeout: state:x%x rtry:x%x flg:x%x",
vport->port_state, vport->fc_ns_retry, vport->fc_flag);
switch (vport->port_state) {
case LPFC_LOCAL_CFG_LINK:
/* port_state is identically LPFC_LOCAL_CFG_LINK while waiting for
* FAN
*/
/* FAN timeout */
lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY,
"0221 FAN timeout\n");
/* Start discovery by sending FLOGI, clean up old rpis */
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes,
nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state != NLP_STE_NPR_NODE)
continue;
if (ndlp->nlp_type & NLP_FABRIC) {
/* Clean up the ndlp on Fabric connections */
lpfc_drop_node(vport, ndlp);
} else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) {
/* Fail outstanding IO now since device
* is marked for PLOGI.
*/
lpfc_unreg_rpi(vport, ndlp);
}
}
if (vport->port_state != LPFC_FLOGI) {
lpfc_initial_flogi(vport);
return;
}
break;
case LPFC_FDISC:
case LPFC_FLOGI:
/* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */
/* Initial FLOGI timeout */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0222 Initial %s timeout\n",
vport->vpi ? "FDISC" : "FLOGI");
/* Assume no Fabric and go on with discovery.
* Check for outstanding ELS FLOGI to abort.
*/
/* FLOGI failed, so just use loop map to make discovery list */
lpfc_disc_list_loopmap(vport);
/* Start discovery */
lpfc_disc_start(vport);
break;
case LPFC_FABRIC_CFG_LINK:
/* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for
NameServer login */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0223 Timeout while waiting for "
"NameServer login\n");
/* Next look for NameServer ndlp */
ndlp = lpfc_findnode_did(vport, NameServer_DID);
if (ndlp && NLP_CHK_NODE_ACT(ndlp))
lpfc_els_abort(phba, ndlp);
/* ReStart discovery */
goto restart_disc;
case LPFC_NS_QRY:
/* Check for wait for NameServer Rsp timeout */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0224 NameServer Query timeout "
"Data: x%x x%x\n",
vport->fc_ns_retry, LPFC_MAX_NS_RETRY);
if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) {
/* Try it one more time */
vport->fc_ns_retry++;
rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT,
vport->fc_ns_retry, 0);
if (rc == 0)
break;
}
vport->fc_ns_retry = 0;
restart_disc:
/*
* Discovery is over.
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
lpfc_issue_reg_vpi(phba, vport);
else { /* NPIV Not enabled */
lpfc_issue_clear_la(phba, vport);
vport->port_state = LPFC_VPORT_READY;
}
/* Setup and issue mailbox INITIALIZE LINK command */
initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!initlinkmbox) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0206 Device Discovery "
"completion error\n");
phba->link_state = LPFC_HBA_ERROR;
break;
}
lpfc_linkdown(phba);
lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
phba->cfg_link_speed);
initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
initlinkmbox->vport = vport;
initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
lpfc_set_loopback_flag(phba);
if (rc == MBX_NOT_FINISHED)
mempool_free(initlinkmbox, phba->mbox_mem_pool);
break;
case LPFC_DISC_AUTH:
/* Node Authentication timeout */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0227 Node Authentication timeout\n");
lpfc_disc_flush_list(vport);
/*
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
lpfc_issue_reg_vpi(phba, vport);
else { /* NPIV Not enabled */
lpfc_issue_clear_la(phba, vport);
vport->port_state = LPFC_VPORT_READY;
}
break;
case LPFC_VPORT_READY:
if (vport->fc_flag & FC_RSCN_MODE) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0231 RSCN timeout Data: x%x "
"x%x\n",
vport->fc_ns_retry, LPFC_MAX_NS_RETRY);
/* Cleanup any outstanding ELS commands */
lpfc_els_flush_cmd(vport);
lpfc_els_flush_rscn(vport);
lpfc_disc_flush_list(vport);
}
break;
default:
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0229 Unexpected discovery timeout, "
"vport State x%x\n", vport->port_state);
break;
}
switch (phba->link_state) {
case LPFC_CLEAR_LA:
/* CLEAR LA timeout */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0228 CLEAR LA timeout\n");
clrlaerr = 1;
break;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
case LPFC_LINK_UP:
lpfc_issue_clear_la(phba, vport);
/* Drop thru */
case LPFC_LINK_UNKNOWN:
case LPFC_WARM_START:
case LPFC_INIT_START:
case LPFC_INIT_MBX_CMDS:
case LPFC_LINK_DOWN:
case LPFC_HBA_ERROR:
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0230 Unexpected timeout, hba link "
"state x%x\n", phba->link_state);
clrlaerr = 1;
break;
case LPFC_HBA_READY:
break;
}
if (clrlaerr) {
lpfc_disc_flush_list(vport);
psli->ring[(psli->extra_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
psli->ring[(psli->fcp_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
psli->ring[(psli->next_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
vport->port_state = LPFC_VPORT_READY;
}
return;
}
/*
* This routine handles processing a NameServer REG_LOGIN mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
* as the completion routine when the command is
* handed off to the SLI layer.
*/
void
lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t *mb = &pmb->mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
struct lpfc_vport *vport = pmb->vport;
pmb->context1 = NULL;
ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
/*
* Start issuing Fabric-Device Management Interface (FDMI) command to
* 0xfffffa (FDMI well known port) or Delay issuing FDMI command if
* fdmi-on=2 (supporting RPA/hostnmae)
*/
if (vport->cfg_fdmi_on == 1)
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
else
mod_timer(&vport->fc_fdmitmo, jiffies + HZ * 60);
/* decrement the node reference count held for this callback
* function.
*/
lpfc_nlp_put(ndlp);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
return;
}
static int
lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param)
{
uint16_t *rpi = param;
return ndlp->nlp_rpi == *rpi;
}
static int
lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param)
{
return memcmp(&ndlp->nlp_portname, param,
sizeof(ndlp->nlp_portname)) == 0;
}
static struct lpfc_nodelist *
__lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param)
{
struct lpfc_nodelist *ndlp;
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (filter(ndlp, param))
return ndlp;
}
return NULL;
}
/*
* This routine looks up the ndlp lists for the given RPI. If rpi found it
* returns the node list element pointer else return NULL.
*/
struct lpfc_nodelist *
__lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi)
{
return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi);
}
/*
* This routine looks up the ndlp lists for the given WWPN. If WWPN found it
* returns the node element list pointer else return NULL.
*/
struct lpfc_nodelist *
lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp;
spin_lock_irq(shost->host_lock);
ndlp = __lpfc_find_node(vport, lpfc_filter_by_wwpn, wwpn);
spin_unlock_irq(shost->host_lock);
return ndlp;
}
void
lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint32_t did)
{
memset(ndlp, 0, sizeof (struct lpfc_nodelist));
INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp);
INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp);
init_timer(&ndlp->nlp_delayfunc);
ndlp->nlp_delayfunc.function = lpfc_els_retry_delay;
ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
ndlp->nlp_DID = did;
ndlp->vport = vport;
ndlp->nlp_sid = NLP_NO_SID;
INIT_LIST_HEAD(&ndlp->nlp_listp);
kref_init(&ndlp->kref);
NLP_INT_NODE_ACT(ndlp);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
"node init: did:x%x",
ndlp->nlp_DID, 0, 0);
return;
}
/* This routine releases all resources associated with a specifc NPort's ndlp
* and mempool_free's the nodelist.
*/
static void
lpfc_nlp_release(struct kref *kref)
{
struct lpfc_hba *phba;
unsigned long flags;
struct lpfc_nodelist *ndlp = container_of(kref, struct lpfc_nodelist,
kref);
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
"node release: did:x%x flg:x%x type:x%x",
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
"0279 lpfc_nlp_release: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
/* remove ndlp from action. */
lpfc_nlp_remove(ndlp->vport, ndlp);
/* clear the ndlp active flag for all release cases */
phba = ndlp->vport->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
NLP_CLR_NODE_ACT(ndlp);
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
/* free ndlp memory for final ndlp release */
if (NLP_CHK_FREE_REQ(ndlp))
mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool);
}
/* This routine bumps the reference count for a ndlp structure to ensure
* that one discovery thread won't free a ndlp while another discovery thread
* is using it.
*/
struct lpfc_nodelist *
lpfc_nlp_get(struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba;
unsigned long flags;
if (ndlp) {
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
"node get: did:x%x flg:x%x refcnt:x%x",
ndlp->nlp_DID, ndlp->nlp_flag,
atomic_read(&ndlp->kref.refcount));
/* The check of ndlp usage to prevent incrementing the
* ndlp reference count that is in the process of being
* released.
*/
phba = ndlp->vport->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
"0276 lpfc_nlp_get: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
return NULL;
} else
kref_get(&ndlp->kref);
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
}
return ndlp;
}
/* This routine decrements the reference count for a ndlp structure. If the
* count goes to 0, this indicates the the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
*/
int
lpfc_nlp_put(struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba;
unsigned long flags;
if (!ndlp)
return 1;
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
"node put: did:x%x flg:x%x refcnt:x%x",
ndlp->nlp_DID, ndlp->nlp_flag,
atomic_read(&ndlp->kref.refcount));
phba = ndlp->vport->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
/* Check the ndlp memory free acknowledge flag to avoid the
* possible race condition that kref_put got invoked again
* after previous one has done ndlp memory free.
*/
if (NLP_CHK_FREE_ACK(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
"0274 lpfc_nlp_put: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
return 1;
}
/* Check the ndlp inactivate log flag to avoid the possible
* race condition that kref_put got invoked again after ndlp
* is already in inactivating state.
*/
if (NLP_CHK_IACT_REQ(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
"0275 lpfc_nlp_put: ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
(void *)ndlp, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
return 1;
}
/* For last put, mark the ndlp usage flags to make sure no
* other kref_get and kref_put on the same ndlp shall get
* in between the process when the final kref_put has been
* invoked on this ndlp.
*/
if (atomic_read(&ndlp->kref.refcount) == 1) {
/* Indicate ndlp is put to inactive state. */
NLP_SET_IACT_REQ(ndlp);
/* Acknowledge ndlp memory free has been seen. */
if (NLP_CHK_FREE_REQ(ndlp))
NLP_SET_FREE_ACK(ndlp);
}
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
/* Note, the kref_put returns 1 when decrementing a reference
* count that was 1, it invokes the release callback function,
* but it still left the reference count as 1 (not actually
* performs the last decrementation). Otherwise, it actually
* decrements the reference count and returns 0.
*/
return kref_put(&ndlp->kref, lpfc_nlp_release);
}
/* This routine free's the specified nodelist if it is not in use
* by any other discovery thread. This routine returns 1 if the
* ndlp has been freed. A return value of 0 indicates the ndlp is
* not yet been released.
*/
int
lpfc_nlp_not_used(struct lpfc_nodelist *ndlp)
{
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
"node not used: did:x%x flg:x%x refcnt:x%x",
ndlp->nlp_DID, ndlp->nlp_flag,
atomic_read(&ndlp->kref.refcount));
if (atomic_read(&ndlp->kref.refcount) == 1)
if (lpfc_nlp_put(ndlp))
return 1;
return 0;
}