OpenCloudOS-Kernel/net/l2tp/l2tp_ip6.c

820 lines
20 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* L2TPv3 IP encapsulation support for IPv6
*
* Copyright (c) 2012 Katalix Systems Ltd
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/icmp.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/random.h>
#include <linux/socket.h>
#include <linux/l2tp.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <net/sock.h>
#include <net/ip.h>
#include <net/icmp.h>
#include <net/udp.h>
#include <net/inet_common.h>
#include <net/inet_hashtables.h>
#include <net/inet6_hashtables.h>
#include <net/tcp_states.h>
#include <net/protocol.h>
#include <net/xfrm.h>
#include <net/transp_v6.h>
#include <net/addrconf.h>
#include <net/ip6_route.h>
#include "l2tp_core.h"
struct l2tp_ip6_sock {
/* inet_sock has to be the first member of l2tp_ip6_sock */
struct inet_sock inet;
u32 conn_id;
u32 peer_conn_id;
/* ipv6_pinfo has to be the last member of l2tp_ip6_sock, see
inet6_sk_generic */
struct ipv6_pinfo inet6;
};
static DEFINE_RWLOCK(l2tp_ip6_lock);
static struct hlist_head l2tp_ip6_table;
static struct hlist_head l2tp_ip6_bind_table;
static inline struct l2tp_ip6_sock *l2tp_ip6_sk(const struct sock *sk)
{
return (struct l2tp_ip6_sock *)sk;
}
static struct sock *__l2tp_ip6_bind_lookup(const struct net *net,
const struct in6_addr *laddr,
const struct in6_addr *raddr,
int dif, u32 tunnel_id)
{
struct sock *sk;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
sk_for_each_bound(sk, &l2tp_ip6_bind_table) {
const struct in6_addr *sk_laddr = inet6_rcv_saddr(sk);
const struct in6_addr *sk_raddr = &sk->sk_v6_daddr;
const struct l2tp_ip6_sock *l2tp = l2tp_ip6_sk(sk);
if (!net_eq(sock_net(sk), net))
continue;
if (sk->sk_bound_dev_if && dif && sk->sk_bound_dev_if != dif)
continue;
if (sk_laddr && !ipv6_addr_any(sk_laddr) &&
!ipv6_addr_any(laddr) && !ipv6_addr_equal(sk_laddr, laddr))
continue;
if (!ipv6_addr_any(sk_raddr) && raddr &&
!ipv6_addr_any(raddr) && !ipv6_addr_equal(sk_raddr, raddr))
continue;
if (l2tp->conn_id != tunnel_id)
continue;
goto found;
}
sk = NULL;
found:
return sk;
}
/* When processing receive frames, there are two cases to
* consider. Data frames consist of a non-zero session-id and an
* optional cookie. Control frames consist of a regular L2TP header
* preceded by 32-bits of zeros.
*
* L2TPv3 Session Header Over IP
*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Session ID |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Cookie (optional, maximum 64 bits)...
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* L2TPv3 Control Message Header Over IP
*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | (32 bits of zeros) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |T|L|x|x|S|x|x|x|x|x|x|x| Ver | Length |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Control Connection ID |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Ns | Nr |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* All control frames are passed to userspace.
*/
static int l2tp_ip6_recv(struct sk_buff *skb)
{
struct net *net = dev_net(skb->dev);
struct sock *sk;
u32 session_id;
u32 tunnel_id;
unsigned char *ptr, *optr;
struct l2tp_session *session;
struct l2tp_tunnel *tunnel = NULL;
struct ipv6hdr *iph;
int length;
if (!pskb_may_pull(skb, 4))
goto discard;
/* Point to L2TP header */
optr = ptr = skb->data;
session_id = ntohl(*((__be32 *) ptr));
ptr += 4;
/* RFC3931: L2TP/IP packets have the first 4 bytes containing
* the session_id. If it is 0, the packet is a L2TP control
* frame and the session_id value can be discarded.
*/
if (session_id == 0) {
__skb_pull(skb, 4);
goto pass_up;
}
/* Ok, this is a data packet. Lookup the session. */
session = l2tp_session_get(net, session_id);
if (!session)
goto discard;
tunnel = session->tunnel;
if (!tunnel)
goto discard_sess;
/* Trace packet contents, if enabled */
if (tunnel->debug & L2TP_MSG_DATA) {
length = min(32u, skb->len);
if (!pskb_may_pull(skb, length))
goto discard_sess;
/* Point to L2TP header */
optr = ptr = skb->data;
ptr += 4;
pr_debug("%s: ip recv\n", tunnel->name);
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length);
}
if (l2tp_v3_ensure_opt_in_linear(session, skb, &ptr, &optr))
goto discard_sess;
l2tp_recv_common(session, skb, ptr, optr, 0, skb->len);
l2tp_session_dec_refcount(session);
return 0;
pass_up:
/* Get the tunnel_id from the L2TP header */
if (!pskb_may_pull(skb, 12))
goto discard;
if ((skb->data[0] & 0xc0) != 0xc0)
goto discard;
tunnel_id = ntohl(*(__be32 *) &skb->data[4]);
iph = ipv6_hdr(skb);
read_lock_bh(&l2tp_ip6_lock);
sk = __l2tp_ip6_bind_lookup(net, &iph->daddr, &iph->saddr,
inet6_iif(skb), tunnel_id);
if (!sk) {
read_unlock_bh(&l2tp_ip6_lock);
goto discard;
}
sock_hold(sk);
read_unlock_bh(&l2tp_ip6_lock);
if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
goto discard_put;
nf_reset_ct(skb);
return sk_receive_skb(sk, skb, 1);
discard_sess:
l2tp_session_dec_refcount(session);
goto discard;
discard_put:
sock_put(sk);
discard:
kfree_skb(skb);
return 0;
}
static int l2tp_ip6_open(struct sock *sk)
{
/* Prevent autobind. We don't have ports. */
inet_sk(sk)->inet_num = IPPROTO_L2TP;
write_lock_bh(&l2tp_ip6_lock);
sk_add_node(sk, &l2tp_ip6_table);
write_unlock_bh(&l2tp_ip6_lock);
return 0;
}
static void l2tp_ip6_close(struct sock *sk, long timeout)
{
write_lock_bh(&l2tp_ip6_lock);
hlist_del_init(&sk->sk_bind_node);
sk_del_node_init(sk);
write_unlock_bh(&l2tp_ip6_lock);
sk_common_release(sk);
}
static void l2tp_ip6_destroy_sock(struct sock *sk)
{
l2tp: fix races with tunnel socket close The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-24 01:45:45 +08:00
struct l2tp_tunnel *tunnel = sk->sk_user_data;
lock_sock(sk);
ip6_flush_pending_frames(sk);
release_sock(sk);
l2tp: fix races with tunnel socket close The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-24 01:45:45 +08:00
if (tunnel)
l2tp_tunnel_delete(tunnel);
inet6_destroy_sock(sk);
}
static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
struct sockaddr_l2tpip6 *addr = (struct sockaddr_l2tpip6 *) uaddr;
struct net *net = sock_net(sk);
__be32 v4addr = 0;
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind() It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 20:09:46 +08:00
int bound_dev_if;
int addr_type;
int err;
if (addr->l2tp_family != AF_INET6)
return -EINVAL;
if (addr_len < sizeof(*addr))
return -EINVAL;
addr_type = ipv6_addr_type(&addr->l2tp_addr);
/* l2tp_ip6 sockets are IPv6 only */
if (addr_type == IPV6_ADDR_MAPPED)
return -EADDRNOTAVAIL;
/* L2TP is point-point, not multicast */
if (addr_type & IPV6_ADDR_MULTICAST)
return -EADDRNOTAVAIL;
lock_sock(sk);
err = -EINVAL;
l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind() Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind(). Without lock, a concurrent call could modify the socket flags between the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way, a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it would then leave a stale pointer there, generating use-after-free errors when walking through the list or modifying adjacent entries. BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8 Write of size 8 by task syz-executor/10987 CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0 Call Trace: [<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15 [<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [< inline >] print_address_description mm/kasan/report.c:194 [<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283 [< inline >] kasan_report mm/kasan/report.c:303 [<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329 [< inline >] __write_once_size ./include/linux/compiler.h:249 [< inline >] __hlist_del ./include/linux/list.h:622 [< inline >] hlist_del_init ./include/linux/list.h:637 [<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239 [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [<ffffffff813774f9>] task_work_run+0xf9/0x170 [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448 Allocated: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0 [ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20 [ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417 [ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708 [ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716 [ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721 [ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326 [ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388 [ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182 [ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153 [ 1116.897025] [< inline >] sock_create net/socket.c:1193 [ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223 [ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203 [ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6 Freed: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0 [ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352 [ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374 [ 1116.897025] [< inline >] slab_free mm/slub.c:2951 [ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973 [ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369 [ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444 [ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452 [ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460 [ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471 [ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589 [ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243 [ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170 [ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table. Fixes: c51ce49735c1 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case") Reported-by: Baozeng Ding <sploving1@gmail.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-19 05:13:00 +08:00
if (!sock_flag(sk, SOCK_ZAPPED))
goto out_unlock;
if (sk->sk_state != TCP_CLOSE)
goto out_unlock;
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind() It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 20:09:46 +08:00
bound_dev_if = sk->sk_bound_dev_if;
/* Check if the address belongs to the host. */
rcu_read_lock();
if (addr_type != IPV6_ADDR_ANY) {
struct net_device *dev = NULL;
if (addr_type & IPV6_ADDR_LINKLOCAL) {
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind() It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 20:09:46 +08:00
if (addr->l2tp_scope_id)
bound_dev_if = addr->l2tp_scope_id;
/* Binding to link-local address requires an
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind() It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 20:09:46 +08:00
* interface.
*/
if (!bound_dev_if)
goto out_unlock_rcu;
err = -ENODEV;
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind() It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 20:09:46 +08:00
dev = dev_get_by_index_rcu(sock_net(sk), bound_dev_if);
if (!dev)
goto out_unlock_rcu;
}
/* ipv4 addr of the socket is invalid. Only the
* unspecified and mapped address have a v4 equivalent.
*/
v4addr = LOOPBACK4_IPV6;
err = -EADDRNOTAVAIL;
if (!ipv6_chk_addr(sock_net(sk), &addr->l2tp_addr, dev, 0))
goto out_unlock_rcu;
}
rcu_read_unlock();
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind() It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 20:09:46 +08:00
write_lock_bh(&l2tp_ip6_lock);
if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr, NULL, bound_dev_if,
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind() It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 20:09:46 +08:00
addr->l2tp_conn_id)) {
write_unlock_bh(&l2tp_ip6_lock);
err = -EADDRINUSE;
goto out_unlock;
}
inet->inet_saddr = v4addr;
inet->inet_rcv_saddr = v4addr;
sk->sk_bound_dev_if = bound_dev_if;
sk->sk_v6_rcv_saddr = addr->l2tp_addr;
np->saddr = addr->l2tp_addr;
l2tp_ip6_sk(sk)->conn_id = addr->l2tp_conn_id;
sk_add_bind_node(sk, &l2tp_ip6_bind_table);
sk_del_node_init(sk);
write_unlock_bh(&l2tp_ip6_lock);
sock_reset_flag(sk, SOCK_ZAPPED);
release_sock(sk);
return 0;
out_unlock_rcu:
rcu_read_unlock();
out_unlock:
release_sock(sk);
return err;
}
static int l2tp_ip6_connect(struct sock *sk, struct sockaddr *uaddr,
int addr_len)
{
struct sockaddr_l2tpip6 *lsa = (struct sockaddr_l2tpip6 *) uaddr;
struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr;
struct in6_addr *daddr;
int addr_type;
int rc;
if (addr_len < sizeof(*lsa))
return -EINVAL;
if (usin->sin6_family != AF_INET6)
return -EINVAL;
addr_type = ipv6_addr_type(&usin->sin6_addr);
if (addr_type & IPV6_ADDR_MULTICAST)
return -EINVAL;
if (addr_type & IPV6_ADDR_MAPPED) {
daddr = &usin->sin6_addr;
if (ipv4_is_multicast(daddr->s6_addr32[3]))
return -EINVAL;
}
lock_sock(sk);
/* Must bind first - autobinding does not work */
if (sock_flag(sk, SOCK_ZAPPED)) {
rc = -EINVAL;
goto out_sk;
}
rc = __ip6_datagram_connect(sk, uaddr, addr_len);
if (rc < 0)
goto out_sk;
l2tp_ip6_sk(sk)->peer_conn_id = lsa->l2tp_conn_id;
write_lock_bh(&l2tp_ip6_lock);
hlist_del_init(&sk->sk_bind_node);
sk_add_bind_node(sk, &l2tp_ip6_bind_table);
write_unlock_bh(&l2tp_ip6_lock);
out_sk:
release_sock(sk);
return rc;
}
static int l2tp_ip6_disconnect(struct sock *sk, int flags)
{
if (sock_flag(sk, SOCK_ZAPPED))
return 0;
return __udp_disconnect(sk, flags);
}
static int l2tp_ip6_getname(struct socket *sock, struct sockaddr *uaddr,
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
int peer)
{
struct sockaddr_l2tpip6 *lsa = (struct sockaddr_l2tpip6 *)uaddr;
struct sock *sk = sock->sk;
struct ipv6_pinfo *np = inet6_sk(sk);
struct l2tp_ip6_sock *lsk = l2tp_ip6_sk(sk);
lsa->l2tp_family = AF_INET6;
lsa->l2tp_flowinfo = 0;
lsa->l2tp_scope_id = 0;
lsa->l2tp_unused = 0;
if (peer) {
if (!lsk->peer_conn_id)
return -ENOTCONN;
lsa->l2tp_conn_id = lsk->peer_conn_id;
lsa->l2tp_addr = sk->sk_v6_daddr;
if (np->sndflow)
lsa->l2tp_flowinfo = np->flow_label;
} else {
if (ipv6_addr_any(&sk->sk_v6_rcv_saddr))
lsa->l2tp_addr = np->saddr;
else
lsa->l2tp_addr = sk->sk_v6_rcv_saddr;
lsa->l2tp_conn_id = lsk->conn_id;
}
if (ipv6_addr_type(&lsa->l2tp_addr) & IPV6_ADDR_LINKLOCAL)
lsa->l2tp_scope_id = sk->sk_bound_dev_if;
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
return sizeof(*lsa);
}
static int l2tp_ip6_backlog_recv(struct sock *sk, struct sk_buff *skb)
{
int rc;
/* Charge it to the socket, dropping if the queue is full. */
rc = sock_queue_rcv_skb(sk, skb);
if (rc < 0)
goto drop;
return 0;
drop:
IP_INC_STATS(sock_net(sk), IPSTATS_MIB_INDISCARDS);
kfree_skb(skb);
return -1;
}
static int l2tp_ip6_push_pending_frames(struct sock *sk)
{
struct sk_buff *skb;
__be32 *transhdr = NULL;
int err = 0;
skb = skb_peek(&sk->sk_write_queue);
if (skb == NULL)
goto out;
transhdr = (__be32 *)skb_transport_header(skb);
*transhdr = 0;
err = ip6_push_pending_frames(sk);
out:
return err;
}
/* Userspace will call sendmsg() on the tunnel socket to send L2TP
* control frames.
*/
static int l2tp_ip6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
{
struct ipv6_txoptions opt_space;
DECLARE_SOCKADDR(struct sockaddr_l2tpip6 *, lsa, msg->msg_name);
struct in6_addr *daddr, *final_p, final;
struct ipv6_pinfo *np = inet6_sk(sk);
struct ipv6_txoptions *opt_to_free = NULL;
struct ipv6_txoptions *opt = NULL;
struct ip6_flowlabel *flowlabel = NULL;
struct dst_entry *dst = NULL;
struct flowi6 fl6;
struct ipcm6_cookie ipc6;
int addr_len = msg->msg_namelen;
int transhdrlen = 4; /* zero session-id */
int ulen = len + transhdrlen;
int err;
/* Rough check on arithmetic overflow,
better check is made in ip6_append_data().
*/
if (len > INT_MAX)
return -EMSGSIZE;
/* Mirror BSD error message compatibility */
if (msg->msg_flags & MSG_OOB)
return -EOPNOTSUPP;
/*
* Get and verify the address.
*/
memset(&fl6, 0, sizeof(fl6));
fl6.flowi6_mark = sk->sk_mark;
fl6.flowi6_uid = sk->sk_uid;
ipcm6_init(&ipc6);
if (lsa) {
if (addr_len < SIN6_LEN_RFC2133)
return -EINVAL;
if (lsa->l2tp_family && lsa->l2tp_family != AF_INET6)
return -EAFNOSUPPORT;
daddr = &lsa->l2tp_addr;
if (np->sndflow) {
fl6.flowlabel = lsa->l2tp_flowinfo & IPV6_FLOWINFO_MASK;
if (fl6.flowlabel&IPV6_FLOWLABEL_MASK) {
flowlabel = fl6_sock_lookup(sk, fl6.flowlabel);
if (IS_ERR(flowlabel))
return -EINVAL;
}
}
/*
* Otherwise it will be difficult to maintain
* sk->sk_dst_cache.
*/
if (sk->sk_state == TCP_ESTABLISHED &&
ipv6_addr_equal(daddr, &sk->sk_v6_daddr))
daddr = &sk->sk_v6_daddr;
if (addr_len >= sizeof(struct sockaddr_in6) &&
lsa->l2tp_scope_id &&
ipv6_addr_type(daddr) & IPV6_ADDR_LINKLOCAL)
fl6.flowi6_oif = lsa->l2tp_scope_id;
} else {
if (sk->sk_state != TCP_ESTABLISHED)
return -EDESTADDRREQ;
daddr = &sk->sk_v6_daddr;
fl6.flowlabel = np->flow_label;
}
if (fl6.flowi6_oif == 0)
fl6.flowi6_oif = sk->sk_bound_dev_if;
if (msg->msg_controllen) {
opt = &opt_space;
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(struct ipv6_txoptions);
ipc6.opt = opt;
err = ip6_datagram_send_ctl(sock_net(sk), sk, msg, &fl6, &ipc6);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
}
if ((fl6.flowlabel & IPV6_FLOWLABEL_MASK) && !flowlabel) {
flowlabel = fl6_sock_lookup(sk, fl6.flowlabel);
if (IS_ERR(flowlabel))
return -EINVAL;
}
if (!(opt->opt_nflen|opt->opt_flen))
opt = NULL;
}
if (!opt) {
opt = txopt_get(np);
opt_to_free = opt;
}
if (flowlabel)
opt = fl6_merge_options(&opt_space, flowlabel, opt);
opt = ipv6_fixup_options(&opt_space, opt);
ipc6.opt = opt;
fl6.flowi6_proto = sk->sk_protocol;
if (!ipv6_addr_any(daddr))
fl6.daddr = *daddr;
else
fl6.daddr.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */
if (ipv6_addr_any(&fl6.saddr) && !ipv6_addr_any(&np->saddr))
fl6.saddr = np->saddr;
final_p = fl6_update_dst(&fl6, opt, &final);
if (!fl6.flowi6_oif && ipv6_addr_is_multicast(&fl6.daddr))
fl6.flowi6_oif = np->mcast_oif;
else if (!fl6.flowi6_oif)
fl6.flowi6_oif = np->ucast_oif;
security_sk_classify_flow(sk, flowi6_to_flowi(&fl6));
if (ipc6.tclass < 0)
ipc6.tclass = np->tclass;
fl6.flowlabel = ip6_make_flowinfo(ipc6.tclass, fl6.flowlabel);
dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto out;
}
if (ipc6.hlimit < 0)
ipc6.hlimit = ip6_sk_dst_hoplimit(np, &fl6, dst);
if (ipc6.dontfrag < 0)
ipc6.dontfrag = np->dontfrag;
if (msg->msg_flags & MSG_CONFIRM)
goto do_confirm;
back_from_confirm:
lock_sock(sk);
err = ip6_append_data(sk, ip_generic_getfrag, msg,
ulen, transhdrlen, &ipc6,
&fl6, (struct rt6_info *)dst,
msg->msg_flags);
if (err)
ip6_flush_pending_frames(sk);
else if (!(msg->msg_flags & MSG_MORE))
err = l2tp_ip6_push_pending_frames(sk);
release_sock(sk);
done:
dst_release(dst);
out:
fl6_sock_release(flowlabel);
txopt_put(opt_to_free);
return err < 0 ? err : len;
do_confirm:
if (msg->msg_flags & MSG_PROBE)
dst_confirm_neigh(dst, &fl6.daddr);
if (!(msg->msg_flags & MSG_PROBE) || len)
goto back_from_confirm;
err = 0;
goto done;
}
static int l2tp_ip6_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
int noblock, int flags, int *addr_len)
{
struct ipv6_pinfo *np = inet6_sk(sk);
DECLARE_SOCKADDR(struct sockaddr_l2tpip6 *, lsa, msg->msg_name);
size_t copied = 0;
int err = -EOPNOTSUPP;
struct sk_buff *skb;
if (flags & MSG_OOB)
goto out;
if (flags & MSG_ERRQUEUE)
return ipv6_recv_error(sk, msg, len, addr_len);
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
goto out;
copied = skb->len;
if (len < copied) {
msg->msg_flags |= MSG_TRUNC;
copied = len;
}
err = skb_copy_datagram_msg(skb, 0, msg, copied);
if (err)
goto done;
sock_recv_timestamp(msg, sk, skb);
/* Copy the address. */
if (lsa) {
lsa->l2tp_family = AF_INET6;
lsa->l2tp_unused = 0;
lsa->l2tp_addr = ipv6_hdr(skb)->saddr;
lsa->l2tp_flowinfo = 0;
lsa->l2tp_scope_id = 0;
lsa->l2tp_conn_id = 0;
if (ipv6_addr_type(&lsa->l2tp_addr) & IPV6_ADDR_LINKLOCAL)
lsa->l2tp_scope_id = inet6_iif(skb);
l2tp: fix infoleak in l2tp_ip6_recvmsg() Back in 2013 Hannes took care of most of such leaks in commit bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") But the bug in l2tp_ip6_recvmsg() has not been fixed. syzbot report : BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600 kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] move_addr_to_user+0x311/0x570 net/socket.c:227 ___sys_recvmsg+0xb65/0x1310 net/socket.c:2283 do_recvmmsg+0x646/0x10c0 net/socket.c:2390 __sys_recvmmsg net/socket.c:2469 [inline] __do_sys_recvmmsg net/socket.c:2492 [inline] __se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x445819 Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819 RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xf6/0x1310 net/socket.c:2244 do_recvmmsg+0x646/0x10c0 net/socket.c:2390 Bytes 0-31 of 32 are uninitialized Memory access of size 32 starts at ffff8880ae62fbb0 Data copied to user address 0000000020000000 Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12 21:50:11 +08:00
*addr_len = sizeof(*lsa);
}
if (np->rxopt.all)
ip6_datagram_recv_ctl(sk, msg, skb);
if (flags & MSG_TRUNC)
copied = skb->len;
done:
skb_free_datagram(sk, skb);
out:
return err ? err : copied;
}
static struct proto l2tp_ip6_prot = {
.name = "L2TP/IPv6",
.owner = THIS_MODULE,
.init = l2tp_ip6_open,
.close = l2tp_ip6_close,
.bind = l2tp_ip6_bind,
.connect = l2tp_ip6_connect,
.disconnect = l2tp_ip6_disconnect,
.ioctl = l2tp_ioctl,
.destroy = l2tp_ip6_destroy_sock,
.setsockopt = ipv6_setsockopt,
.getsockopt = ipv6_getsockopt,
.sendmsg = l2tp_ip6_sendmsg,
.recvmsg = l2tp_ip6_recvmsg,
.backlog_rcv = l2tp_ip6_backlog_recv,
.hash = inet6_hash,
.unhash = inet_unhash,
.obj_size = sizeof(struct l2tp_ip6_sock),
#ifdef CONFIG_COMPAT
.compat_setsockopt = compat_ipv6_setsockopt,
.compat_getsockopt = compat_ipv6_getsockopt,
#endif
};
static const struct proto_ops l2tp_ip6_ops = {
.family = PF_INET6,
.owner = THIS_MODULE,
.release = inet6_release,
.bind = inet6_bind,
.connect = inet_dgram_connect,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = l2tp_ip6_getname,
.poll = datagram_poll,
.ioctl = inet6_ioctl,
.gettstamp = sock_gettstamp,
.listen = sock_no_listen,
.shutdown = inet_shutdown,
.setsockopt = sock_common_setsockopt,
.getsockopt = sock_common_getsockopt,
.sendmsg = inet_sendmsg,
.recvmsg = sock_common_recvmsg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage,
#ifdef CONFIG_COMPAT
.compat_setsockopt = compat_sock_common_setsockopt,
.compat_getsockopt = compat_sock_common_getsockopt,
#endif
};
static struct inet_protosw l2tp_ip6_protosw = {
.type = SOCK_DGRAM,
.protocol = IPPROTO_L2TP,
.prot = &l2tp_ip6_prot,
.ops = &l2tp_ip6_ops,
};
static struct inet6_protocol l2tp_ip6_protocol __read_mostly = {
.handler = l2tp_ip6_recv,
};
static int __init l2tp_ip6_init(void)
{
int err;
pr_info("L2TP IP encapsulation support for IPv6 (L2TPv3)\n");
err = proto_register(&l2tp_ip6_prot, 1);
if (err != 0)
goto out;
err = inet6_add_protocol(&l2tp_ip6_protocol, IPPROTO_L2TP);
if (err)
goto out1;
inet6_register_protosw(&l2tp_ip6_protosw);
return 0;
out1:
proto_unregister(&l2tp_ip6_prot);
out:
return err;
}
static void __exit l2tp_ip6_exit(void)
{
inet6_unregister_protosw(&l2tp_ip6_protosw);
inet6_del_protocol(&l2tp_ip6_protocol, IPPROTO_L2TP);
proto_unregister(&l2tp_ip6_prot);
}
module_init(l2tp_ip6_init);
module_exit(l2tp_ip6_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Elston <celston@katalix.com>");
MODULE_DESCRIPTION("L2TP IP encapsulation for IPv6");
MODULE_VERSION("1.0");
/* Use the value of SOCK_DGRAM (2) directory, because __stringify doesn't like
* enums
*/
MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET6, 2, IPPROTO_L2TP);
MODULE_ALIAS_NET_PF_PROTO(PF_INET6, IPPROTO_L2TP);