UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/opp/of.c

952 lines
24 KiB
C
Raw Normal View History

PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/*
* Generic OPP OF helpers
*
* Copyright (C) 2009-2010 Texas Instruments Incorporated.
* Nishanth Menon
* Romit Dasgupta
* Kevin Hilman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/device.h>
PM / OPP: add missing of_node_put() for of_get_cpu_node() Commit 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) moved away from using cpu_dev->of_node because of some limitations. However, commit 7467c9d95989 (of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered) added support to fall back to of_get_cpu_node() if called if CPUs are not registered yet. Add the missing of_node_put() for the CPU device nodes. Also go back to using of_cpu_device_node_get() in dev_pm_opp_of_get_sharing_cpus() to avoid scanning the device tree again. Acked-by: Viresh Kumar <vireshk@kernel.org> Fixes: 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-12 18:32:23 +08:00
#include <linux/of_device.h>
PM / OPP: Get performance state using genpd helper The genpd core provides an API now to retrieve the performance state from DT, use that instead of the ->get_pstate() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-18 18:17:46 +08:00
#include <linux/pm_domain.h>
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
#include <linux/slab.h>
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
#include <linux/export.h>
#include "opp.h"
OPP: Parse OPP table's DT properties from _of_init_opp_table() Parse the DT properties present in the OPP table from _of_init_opp_table(), which is a dedicated routine for DT parsing. Minor relocation of helpers is required for this. It is possible now for _managed_opp() to return a partially initialized OPP table if the OPP table is created via the helpers like dev_pm_opp_set_supported_hw() and we need another flag to indicate if the static OPP are already parsed or not to make sure we don't incorrectly skip initializing the static OPPs. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-14 14:34:43 +08:00
/*
* Returns opp descriptor node for a device node, caller must
* do of_node_put().
*/
static struct device_node *_opp_of_get_opp_desc_node(struct device_node *np,
int index)
{
/* "operating-points-v2" can be an array for power domain providers */
return of_parse_phandle(np, "operating-points-v2", index);
}
/* Returns opp descriptor node for a device, caller must do of_node_put() */
struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev)
{
return _opp_of_get_opp_desc_node(dev->of_node, 0);
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_opp_desc_node);
OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes When two or more devices are sharing their clock and voltage rails, they share the same OPP table. But there are some corner cases where the OPP core incorrectly creates separate OPP tables for them. For example, CPU 0 and 1 share clock/voltage rails. The platform specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP core creates an OPP table for it (the individual OPPs aren't initialized as of now). The same is repeated for CPU1 then. Because _opp_get_opp_table() doesn't compare DT node pointers currently, it fails to find the link between CPU0 and CPU1 and so creates a new OPP table. Fix this by calling _managed_opp() from _opp_get_opp_table(). _managed_opp() gain an additional argument (index) to get the right node pointer. This resulted in simplifying code in _of_add_opp_table_v2() as well. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-07 11:31:54 +08:00
struct opp_table *_managed_opp(struct device *dev, int index)
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
{
PM / OPP: Use dev_pm_opp_get_opp_table() instead of _add_opp_table() Migrate all users of _add_opp_table() to use dev_pm_opp_get_opp_table() to guarantee that the OPP table doesn't get freed while being used. Also update _managed_opp() to get the reference to the OPP table. Now that the OPP table wouldn't get freed while these routines are executing after dev_pm_opp_get_opp_table() is called, there is no need to take opp_table_lock. Drop them as well. Now that _add_opp_table(), _remove_opp_table() and the unlocked release routines aren't used anymore, remove them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-23 12:41:45 +08:00
struct opp_table *opp_table, *managed_table = NULL;
OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes When two or more devices are sharing their clock and voltage rails, they share the same OPP table. But there are some corner cases where the OPP core incorrectly creates separate OPP tables for them. For example, CPU 0 and 1 share clock/voltage rails. The platform specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP core creates an OPP table for it (the individual OPPs aren't initialized as of now). The same is repeated for CPU1 then. Because _opp_get_opp_table() doesn't compare DT node pointers currently, it fails to find the link between CPU0 and CPU1 and so creates a new OPP table. Fix this by calling _managed_opp() from _opp_get_opp_table(). _managed_opp() gain an additional argument (index) to get the right node pointer. This resulted in simplifying code in _of_add_opp_table_v2() as well. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-07 11:31:54 +08:00
struct device_node *np;
PM / OPP: Use dev_pm_opp_get_opp_table() instead of _add_opp_table() Migrate all users of _add_opp_table() to use dev_pm_opp_get_opp_table() to guarantee that the OPP table doesn't get freed while being used. Also update _managed_opp() to get the reference to the OPP table. Now that the OPP table wouldn't get freed while these routines are executing after dev_pm_opp_get_opp_table() is called, there is no need to take opp_table_lock. Drop them as well. Now that _add_opp_table(), _remove_opp_table() and the unlocked release routines aren't used anymore, remove them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-23 12:41:45 +08:00
OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes When two or more devices are sharing their clock and voltage rails, they share the same OPP table. But there are some corner cases where the OPP core incorrectly creates separate OPP tables for them. For example, CPU 0 and 1 share clock/voltage rails. The platform specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP core creates an OPP table for it (the individual OPPs aren't initialized as of now). The same is repeated for CPU1 then. Because _opp_get_opp_table() doesn't compare DT node pointers currently, it fails to find the link between CPU0 and CPU1 and so creates a new OPP table. Fix this by calling _managed_opp() from _opp_get_opp_table(). _managed_opp() gain an additional argument (index) to get the right node pointer. This resulted in simplifying code in _of_add_opp_table_v2() as well. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-07 11:31:54 +08:00
np = _opp_of_get_opp_desc_node(dev->of_node, index);
if (!np)
return NULL;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
PM / OPP: Move away from RCU locking The RCU locking isn't well suited for the OPP core. The RCU locking fits better for reader heavy stuff, while the OPP core have at max one or two readers only at a time. Over that, it was getting very confusing the way RCU locking was used with the OPP core. The individual OPPs are mostly well handled, i.e. for an update a new structure was created and then that replaced the older one. But the OPP tables were updated directly all the time from various parts of the core. Though they were mostly used from within RCU locked region, they didn't had much to do with RCU and were governed by the mutex instead. And that mixed with the 'opp_table_lock' has made the core even more confusing. Now that we are already managing the OPPs and the OPP tables with kernel reference infrastructure, we can get rid of RCU locking completely and simplify the code a lot. Remove all RCU references from code and comments. Acquire opp_table->lock while parsing the list of OPPs though. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-23 12:41:49 +08:00
list_for_each_entry(opp_table, &opp_tables, node) {
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
if (opp_table->np == np) {
/*
* Multiple devices can point to the same OPP table and
* so will have same node-pointer, np.
*
* But the OPPs will be considered as shared only if the
* OPP table contains a "opp-shared" property.
*/
PM / OPP: Use dev_pm_opp_get_opp_table() instead of _add_opp_table() Migrate all users of _add_opp_table() to use dev_pm_opp_get_opp_table() to guarantee that the OPP table doesn't get freed while being used. Also update _managed_opp() to get the reference to the OPP table. Now that the OPP table wouldn't get freed while these routines are executing after dev_pm_opp_get_opp_table() is called, there is no need to take opp_table_lock. Drop them as well. Now that _add_opp_table(), _remove_opp_table() and the unlocked release routines aren't used anymore, remove them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-23 12:41:45 +08:00
if (opp_table->shared_opp == OPP_TABLE_ACCESS_SHARED) {
_get_opp_table_kref(opp_table);
managed_table = opp_table;
}
PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_table dev_pm_opp_get_sharing_cpus() returns 0 even in the case when the OPP core doesn't know whether or not the table is shared. It works on the majority of platforms, where the OPP table is never created before invoking the function and then -ENODEV is returned by it. But in the case of one platform (Jetson TK1) at least, the situation is a bit different. The OPP table has been created (somehow) before dev_pm_opp_get_sharing_cpus() is called and it returns 0. Its caller treats that as 'the CPUs don't share OPPs' and that leads to degraded performance. Fix this by converting 'shared_opp' in struct opp_table to an enum and making dev_pm_opp_get_sharing_cpus() return -EINVAL in case when the value of that field is "access unknown", so that the caller can handle it accordingly (cpufreq-dt considers that as 'all CPUs share the table', for example). Fixes: 6f707daa3833 "PM / OPP: Add dev_pm_opp_get_sharing_cpus()" Reported-and-tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw : Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-16 21:33:11 +08:00
PM / OPP: Use dev_pm_opp_get_opp_table() instead of _add_opp_table() Migrate all users of _add_opp_table() to use dev_pm_opp_get_opp_table() to guarantee that the OPP table doesn't get freed while being used. Also update _managed_opp() to get the reference to the OPP table. Now that the OPP table wouldn't get freed while these routines are executing after dev_pm_opp_get_opp_table() is called, there is no need to take opp_table_lock. Drop them as well. Now that _add_opp_table(), _remove_opp_table() and the unlocked release routines aren't used anymore, remove them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-23 12:41:45 +08:00
break;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
}
OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes When two or more devices are sharing their clock and voltage rails, they share the same OPP table. But there are some corner cases where the OPP core incorrectly creates separate OPP tables for them. For example, CPU 0 and 1 share clock/voltage rails. The platform specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP core creates an OPP table for it (the individual OPPs aren't initialized as of now). The same is repeated for CPU1 then. Because _opp_get_opp_table() doesn't compare DT node pointers currently, it fails to find the link between CPU0 and CPU1 and so creates a new OPP table. Fix this by calling _managed_opp() from _opp_get_opp_table(). _managed_opp() gain an additional argument (index) to get the right node pointer. This resulted in simplifying code in _of_add_opp_table_v2() as well. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-07 11:31:54 +08:00
of_node_put(np);
PM / OPP: Use dev_pm_opp_get_opp_table() instead of _add_opp_table() Migrate all users of _add_opp_table() to use dev_pm_opp_get_opp_table() to guarantee that the OPP table doesn't get freed while being used. Also update _managed_opp() to get the reference to the OPP table. Now that the OPP table wouldn't get freed while these routines are executing after dev_pm_opp_get_opp_table() is called, there is no need to take opp_table_lock. Drop them as well. Now that _add_opp_table(), _remove_opp_table() and the unlocked release routines aren't used anymore, remove them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-23 12:41:45 +08:00
return managed_table;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
OPP: Populate required opp tables from "required-opps" property The current implementation works only for the case where a single phandle is present in the "required-opps" property, while DT allows multiple phandles to be present there. This patch adds new infrastructure to parse all the phandles present in "required-opps" property and save pointers of the required OPP's OPP tables. These will be used by later commits. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-07 17:20:43 +08:00
/* The caller must call dev_pm_opp_put() after the OPP is used */
static struct dev_pm_opp *_find_opp_of_np(struct opp_table *opp_table,
struct device_node *opp_np)
{
struct dev_pm_opp *opp;
lockdep_assert_held(&opp_table_lock);
mutex_lock(&opp_table->lock);
list_for_each_entry(opp, &opp_table->opp_list, node) {
if (opp->np == opp_np) {
dev_pm_opp_get(opp);
mutex_unlock(&opp_table->lock);
return opp;
}
}
mutex_unlock(&opp_table->lock);
return NULL;
}
static struct device_node *of_parse_required_opp(struct device_node *np,
int index)
{
struct device_node *required_np;
required_np = of_parse_phandle(np, "required-opps", index);
if (unlikely(!required_np)) {
pr_err("%s: Unable to parse required-opps: %pOF, index: %d\n",
__func__, np, index);
}
return required_np;
}
/* The caller must call dev_pm_opp_put_opp_table() after the table is used */
static struct opp_table *_find_table_of_opp_np(struct device_node *opp_np)
{
struct opp_table *opp_table;
struct dev_pm_opp *opp;
lockdep_assert_held(&opp_table_lock);
list_for_each_entry(opp_table, &opp_tables, node) {
opp = _find_opp_of_np(opp_table, opp_np);
if (opp) {
dev_pm_opp_put(opp);
_get_opp_table_kref(opp_table);
return opp_table;
}
}
return ERR_PTR(-ENODEV);
}
/* Free resources previously acquired by _opp_table_alloc_required_tables() */
static void _opp_table_free_required_tables(struct opp_table *opp_table)
{
struct opp_table **required_opp_tables = opp_table->required_opp_tables;
int i;
if (!required_opp_tables)
return;
for (i = 0; i < opp_table->required_opp_count; i++) {
if (IS_ERR_OR_NULL(required_opp_tables[i]))
break;
dev_pm_opp_put_opp_table(required_opp_tables[i]);
}
kfree(required_opp_tables);
opp_table->required_opp_count = 0;
opp_table->required_opp_tables = NULL;
}
/*
* Populate all devices and opp tables which are part of "required-opps" list.
* Checking only the first OPP node should be enough.
*/
static void _opp_table_alloc_required_tables(struct opp_table *opp_table,
struct device *dev,
struct device_node *opp_np)
{
struct opp_table **required_opp_tables;
struct device_node *required_np, *np;
int count, i;
/* Traversing the first OPP node is all we need */
np = of_get_next_available_child(opp_np, NULL);
if (!np) {
dev_err(dev, "Empty OPP table\n");
return;
}
count = of_count_phandle_with_args(np, "required-opps", NULL);
if (!count)
goto put_np;
required_opp_tables = kcalloc(count, sizeof(*required_opp_tables),
GFP_KERNEL);
if (!required_opp_tables)
goto put_np;
opp_table->required_opp_tables = required_opp_tables;
opp_table->required_opp_count = count;
for (i = 0; i < count; i++) {
required_np = of_parse_required_opp(np, i);
if (!required_np)
goto free_required_tables;
required_opp_tables[i] = _find_table_of_opp_np(required_np);
of_node_put(required_np);
if (IS_ERR(required_opp_tables[i]))
goto free_required_tables;
/*
* We only support genpd's OPPs in the "required-opps" for now,
* as we don't know how much about other cases. Error out if the
* required OPP doesn't belong to a genpd.
*/
if (!required_opp_tables[i]->is_genpd) {
dev_err(dev, "required-opp doesn't belong to genpd: %pOF\n",
required_np);
goto free_required_tables;
}
}
goto put_np;
free_required_tables:
_opp_table_free_required_tables(opp_table);
put_np:
of_node_put(np);
}
OPP: Pass index to _of_init_opp_table() This is a preparatory patch required for the next commit which will start using OPP table's node pointer in _of_init_opp_table(), which requires the index in order to read the OPP table's phandle. This commit adds the index argument in the call chains in order to get it delivered to _of_init_opp_table(). Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-05 18:47:14 +08:00
void _of_init_opp_table(struct opp_table *opp_table, struct device *dev,
int index)
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
{
OPP: Parse OPP table's DT properties from _of_init_opp_table() Parse the DT properties present in the OPP table from _of_init_opp_table(), which is a dedicated routine for DT parsing. Minor relocation of helpers is required for this. It is possible now for _managed_opp() to return a partially initialized OPP table if the OPP table is created via the helpers like dev_pm_opp_set_supported_hw() and we need another flag to indicate if the static OPP are already parsed or not to make sure we don't incorrectly skip initializing the static OPPs. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-14 14:34:43 +08:00
struct device_node *np, *opp_np;
u32 val;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/*
* Only required for backward compatibility with v1 bindings, but isn't
* harmful for other cases. And so we do it unconditionally.
*/
np = of_node_get(dev->of_node);
OPP: Parse OPP table's DT properties from _of_init_opp_table() Parse the DT properties present in the OPP table from _of_init_opp_table(), which is a dedicated routine for DT parsing. Minor relocation of helpers is required for this. It is possible now for _managed_opp() to return a partially initialized OPP table if the OPP table is created via the helpers like dev_pm_opp_set_supported_hw() and we need another flag to indicate if the static OPP are already parsed or not to make sure we don't incorrectly skip initializing the static OPPs. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-14 14:34:43 +08:00
if (!np)
return;
if (!of_property_read_u32(np, "clock-latency", &val))
opp_table->clock_latency_ns_max = val;
of_property_read_u32(np, "voltage-tolerance",
&opp_table->voltage_tolerance_v1);
OPP: Identify and mark genpd OPP tables We need to handle genpd OPP tables differently, this is already the case at one location and will be extended going forward. Add another field to the OPP table to check if the table belongs to a genpd or not. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-13 18:30:11 +08:00
if (of_find_property(np, "#power-domain-cells", NULL))
opp_table->is_genpd = true;
OPP: Parse OPP table's DT properties from _of_init_opp_table() Parse the DT properties present in the OPP table from _of_init_opp_table(), which is a dedicated routine for DT parsing. Minor relocation of helpers is required for this. It is possible now for _managed_opp() to return a partially initialized OPP table if the OPP table is created via the helpers like dev_pm_opp_set_supported_hw() and we need another flag to indicate if the static OPP are already parsed or not to make sure we don't incorrectly skip initializing the static OPPs. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-14 14:34:43 +08:00
/* Get OPP table node */
opp_np = _opp_of_get_opp_desc_node(np, index);
of_node_put(np);
if (!opp_np)
return;
if (of_property_read_bool(opp_np, "opp-shared"))
opp_table->shared_opp = OPP_TABLE_ACCESS_SHARED;
else
opp_table->shared_opp = OPP_TABLE_ACCESS_EXCLUSIVE;
opp_table->np = opp_np;
OPP: Populate required opp tables from "required-opps" property The current implementation works only for the case where a single phandle is present in the "required-opps" property, while DT allows multiple phandles to be present there. This patch adds new infrastructure to parse all the phandles present in "required-opps" property and save pointers of the required OPP's OPP tables. These will be used by later commits. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-07 17:20:43 +08:00
_opp_table_alloc_required_tables(opp_table, dev, opp_np);
OPP: Parse OPP table's DT properties from _of_init_opp_table() Parse the DT properties present in the OPP table from _of_init_opp_table(), which is a dedicated routine for DT parsing. Minor relocation of helpers is required for this. It is possible now for _managed_opp() to return a partially initialized OPP table if the OPP table is created via the helpers like dev_pm_opp_set_supported_hw() and we need another flag to indicate if the static OPP are already parsed or not to make sure we don't incorrectly skip initializing the static OPPs. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-14 14:34:43 +08:00
of_node_put(opp_np);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
OPP: Populate required opp tables from "required-opps" property The current implementation works only for the case where a single phandle is present in the "required-opps" property, while DT allows multiple phandles to be present there. This patch adds new infrastructure to parse all the phandles present in "required-opps" property and save pointers of the required OPP's OPP tables. These will be used by later commits. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-07 17:20:43 +08:00
void _of_clear_opp_table(struct opp_table *opp_table)
{
_opp_table_free_required_tables(opp_table);
}
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
struct device_node *np)
{
unsigned int count = opp_table->supported_hw_count;
u32 version;
int ret;
PM / OPP: Don't support OPP if it provides supported-hw but platform does not The OPP framework allows each OPP to set a opp-supported-hw property which provides values that are matched against supported_hw values provided by the platform to limit support for certain OPPs on specific hardware. Currently, if the platform does not set supported_hw values, all OPPs are interpreted as supported, even if they have provided their own opp-supported-hw values. If an OPP has provided opp-supported-hw, it is indicating that there is some specific hardware configuration it is supported by. These constraints should be honored, and if no supported_hw has been provided by the platform, there is no way to determine if that OPP is actually supported, so it should be marked as not supported. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-24 04:07:47 +08:00
if (!opp_table->supported_hw) {
/*
* In the case that no supported_hw has been set by the
* platform but there is an opp-supported-hw value set for
* an OPP then the OPP should not be enabled as there is
* no way to see if the hardware supports it.
*/
if (of_find_property(np, "opp-supported-hw", NULL))
return false;
else
return true;
}
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
while (count--) {
ret = of_property_read_u32_index(np, "opp-supported-hw", count,
&version);
if (ret) {
dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
__func__, count, ret);
return false;
}
/* Both of these are bitwise masks of the versions */
if (!(version & opp_table->supported_hw[count]))
return false;
}
return true;
}
static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
struct opp_table *opp_table)
{
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
u32 *microvolt, *microamp = NULL;
int supplies, vcount, icount, ret, i, j;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
struct property *prop = NULL;
char name[NAME_MAX];
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
supplies = opp_table->regulator_count ? opp_table->regulator_count : 1;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/* Search for "opp-microvolt-<name>" */
if (opp_table->prop_name) {
snprintf(name, sizeof(name), "opp-microvolt-%s",
opp_table->prop_name);
prop = of_find_property(opp->np, name, NULL);
}
if (!prop) {
/* Search for "opp-microvolt" */
sprintf(name, "opp-microvolt");
prop = of_find_property(opp->np, name, NULL);
/* Missing property isn't a problem, but an invalid entry is */
PM / OPP: opp-microvolt is not optional if regulators are set If dev_pm_opp_set_regulators() is called for a device and its regulators are set in the OPP core, the OPP nodes for the device must contain the "opp-microvolt" property, otherwise there is something wrong and we better error out. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-23 12:02:12 +08:00
if (!prop) {
if (!opp_table->regulator_count)
return 0;
dev_err(dev, "%s: opp-microvolt missing although OPP managing regulators\n",
__func__);
return -EINVAL;
}
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
vcount = of_property_count_u32_elems(opp->np, name);
if (vcount < 0) {
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
dev_err(dev, "%s: Invalid %s property (%d)\n",
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
__func__, name, vcount);
return vcount;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
/* There can be one or three elements per supply */
if (vcount != supplies && vcount != supplies * 3) {
dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
__func__, name, vcount, supplies);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
return -EINVAL;
}
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
microvolt = kmalloc_array(vcount, sizeof(*microvolt), GFP_KERNEL);
if (!microvolt)
return -ENOMEM;
ret = of_property_read_u32_array(opp->np, name, microvolt, vcount);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
if (ret) {
dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
ret = -EINVAL;
goto free_microvolt;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
/* Search for "opp-microamp-<name>" */
prop = NULL;
if (opp_table->prop_name) {
snprintf(name, sizeof(name), "opp-microamp-%s",
opp_table->prop_name);
prop = of_find_property(opp->np, name, NULL);
}
if (!prop) {
/* Search for "opp-microamp" */
sprintf(name, "opp-microamp");
prop = of_find_property(opp->np, name, NULL);
}
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
if (prop) {
icount = of_property_count_u32_elems(opp->np, name);
if (icount < 0) {
dev_err(dev, "%s: Invalid %s property (%d)\n", __func__,
name, icount);
ret = icount;
goto free_microvolt;
}
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
if (icount != supplies) {
dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
__func__, name, icount, supplies);
ret = -EINVAL;
goto free_microvolt;
}
microamp = kmalloc_array(icount, sizeof(*microamp), GFP_KERNEL);
if (!microamp) {
ret = -EINVAL;
goto free_microvolt;
}
ret = of_property_read_u32_array(opp->np, name, microamp,
icount);
if (ret) {
dev_err(dev, "%s: error parsing %s: %d\n", __func__,
name, ret);
ret = -EINVAL;
goto free_microamp;
}
}
for (i = 0, j = 0; i < supplies; i++) {
opp->supplies[i].u_volt = microvolt[j++];
if (vcount == supplies) {
opp->supplies[i].u_volt_min = opp->supplies[i].u_volt;
opp->supplies[i].u_volt_max = opp->supplies[i].u_volt;
} else {
opp->supplies[i].u_volt_min = microvolt[j++];
opp->supplies[i].u_volt_max = microvolt[j++];
}
if (microamp)
opp->supplies[i].u_amp = microamp[i];
}
free_microamp:
kfree(microamp);
free_microvolt:
kfree(microvolt);
return ret;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
/**
* dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
* entries
* @dev: device pointer used to lookup OPP table.
*
* Free OPPs created using static entries present in DT.
*/
void dev_pm_opp_of_remove_table(struct device *dev)
{
OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table() Only one platform was depending on this feature and it is already updated now. Stop removing dynamic OPPs from _dev_pm_opp_remove_table(). This simplifies lot of paths and removes unnecessary parameters. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-13 15:44:36 +08:00
_dev_pm_opp_find_and_remove_table(dev);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
/**
* _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
PM / OPP: Don't allocate OPP table from _opp_allocate() There is no point in trying to find/allocate the table for every OPP that is added for a device. It would be far more efficient to allocate the table only once and pass its pointer to the routines that add the OPP entry. Locking is removed from _opp_add_static_v2() and _opp_add_v1() now as the callers call them with that lock already held. Call to _remove_opp_table() routine is also removed from _opp_free() now, as opp_table isn't allocated from within _opp_allocate(). This is handled by the routines which created the OPP table in the first place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:11:01 +08:00
* @opp_table: OPP table
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
* @dev: device for which we do this operation
* @np: device node
*
* This function adds an opp definition to the opp table and returns status. The
* opp can be controlled using dev_pm_opp_enable/disable functions and may be
* removed by dev_pm_opp_remove.
*
* Return:
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
* Valid OPP pointer:
* On success
* NULL:
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
* Duplicate OPPs (both freq and volt are same) and opp->available
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
* OR if the OPP is not supported by hardware.
* ERR_PTR(-EEXIST):
* Freq are same and volt are different OR
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
* Duplicate OPPs (both freq and volt are same) and !opp->available
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
* ERR_PTR(-ENOMEM):
* Memory allocation failure
* ERR_PTR(-EINVAL):
* Failed parsing the OPP node
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
*/
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
struct device *dev, struct device_node *np)
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
{
struct dev_pm_opp *new_opp;
PM / OPP: silence an uninitialized variable warning Smatch complains that it's possible we print "rate" in the debug output when it hasn't been initialized. It should be zero on that path. Fixes: a1e8c13600bf ("PM / OPP: "opp-hz" is optional for power domains") [ Viresh: Added the Fixes tag ] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-05-16 17:52:41 +08:00
u64 rate = 0;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
u32 val;
int ret;
PM / OPP: "opp-hz" is optional for power domains "opp-hz" property is optional for power domains now and we shouldn't error out if it is missing for power domains. This patch creates two new routines, _get_opp_count() and _opp_is_duplicate(), by separating existing code from their parent functions. Also skip duplicate OPP check for power domain OPPs as they may not have any the "opp-hz" field, but a platform specific performance state binding to uniquely identify OPP nodes. By default the debugfs OPP nodes are named using the "rate" value, but that isn't possible for the power domain OPP nodes and hence they use the index of the OPP node in the OPP node list instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-04-06 17:05:45 +08:00
bool rate_not_available = false;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
PM / OPP: Don't allocate OPP table from _opp_allocate() There is no point in trying to find/allocate the table for every OPP that is added for a device. It would be far more efficient to allocate the table only once and pass its pointer to the routines that add the OPP entry. Locking is removed from _opp_add_static_v2() and _opp_add_v1() now as the callers call them with that lock already held. Call to _remove_opp_table() routine is also removed from _opp_free() now, as opp_table isn't allocated from within _opp_allocate(). This is handled by the routines which created the OPP table in the first place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:11:01 +08:00
new_opp = _opp_allocate(opp_table);
if (!new_opp)
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
return ERR_PTR(-ENOMEM);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
ret = of_property_read_u64(np, "opp-hz", &rate);
if (ret < 0) {
PM / OPP: "opp-hz" is optional for power domains "opp-hz" property is optional for power domains now and we shouldn't error out if it is missing for power domains. This patch creates two new routines, _get_opp_count() and _opp_is_duplicate(), by separating existing code from their parent functions. Also skip duplicate OPP check for power domain OPPs as they may not have any the "opp-hz" field, but a platform specific performance state binding to uniquely identify OPP nodes. By default the debugfs OPP nodes are named using the "rate" value, but that isn't possible for the power domain OPP nodes and hence they use the index of the OPP node in the OPP node list instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-04-06 17:05:45 +08:00
/* "opp-hz" is optional for devices like power domains. */
OPP: Identify and mark genpd OPP tables We need to handle genpd OPP tables differently, this is already the case at one location and will be extended going forward. Add another field to the OPP table to check if the table belongs to a genpd or not. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-13 18:30:11 +08:00
if (!opp_table->is_genpd) {
PM / OPP: "opp-hz" is optional for power domains "opp-hz" property is optional for power domains now and we shouldn't error out if it is missing for power domains. This patch creates two new routines, _get_opp_count() and _opp_is_duplicate(), by separating existing code from their parent functions. Also skip duplicate OPP check for power domain OPPs as they may not have any the "opp-hz" field, but a platform specific performance state binding to uniquely identify OPP nodes. By default the debugfs OPP nodes are named using the "rate" value, but that isn't possible for the power domain OPP nodes and hence they use the index of the OPP node in the OPP node list instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-04-06 17:05:45 +08:00
dev_err(dev, "%s: opp-hz not found\n", __func__);
goto free_opp;
}
rate_not_available = true;
} else {
/*
* Rate is defined as an unsigned long in clk API, and so
* casting explicitly to its type. Must be fixed once rate is 64
* bit guaranteed in clk API.
*/
new_opp->rate = (unsigned long)rate;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
/* Check if the OPP supports hardware's hierarchy of versions or not */
if (!_opp_is_supported(dev, opp_table, np)) {
dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
goto free_opp;
}
new_opp->turbo = of_property_read_bool(np, "turbo-mode");
new_opp->np = np;
new_opp->dynamic = false;
new_opp->available = true;
if (!of_property_read_u32(np, "clock-latency-ns", &val))
new_opp->clock_latency_ns = val;
PM / OPP: Get performance state using genpd helper The genpd core provides an API now to retrieve the performance state from DT, use that instead of the ->get_pstate() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-18 18:17:46 +08:00
new_opp->pstate = of_genpd_opp_to_performance_state(dev, np);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
ret = opp_parse_supplies(new_opp, dev, opp_table);
if (ret)
goto free_opp;
PM / OPP: "opp-hz" is optional for power domains "opp-hz" property is optional for power domains now and we shouldn't error out if it is missing for power domains. This patch creates two new routines, _get_opp_count() and _opp_is_duplicate(), by separating existing code from their parent functions. Also skip duplicate OPP check for power domain OPPs as they may not have any the "opp-hz" field, but a platform specific performance state binding to uniquely identify OPP nodes. By default the debugfs OPP nodes are named using the "rate" value, but that isn't possible for the power domain OPP nodes and hence they use the index of the OPP node in the OPP node list instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-04-06 17:05:45 +08:00
ret = _opp_add(dev, new_opp, opp_table, rate_not_available);
PM / OPP: Fix memory leak while adding duplicate OPPs There are two types of duplicate OPPs that get different behavior from the core: A) An earlier OPP is marked 'available' and has same freq/voltages as the new one. B) An earlier OPP with same frequency, but is marked 'unavailable' OR doesn't have same voltages as the new one. The OPP core returns 0 for the first one, but -EEXIST for the second. While the OPP core returns 0 for the first case, its callers don't free the newly allocated OPP structure which isn't used anymore. Fix that by returning -EBUSY instead of 0, but make the callers return 0 eventually. As this isn't a critical fix, its not getting marked for stable kernel. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:10:55 +08:00
if (ret) {
/* Don't return error for duplicate OPPs */
if (ret == -EBUSY)
ret = 0;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
goto free_opp;
PM / OPP: Fix memory leak while adding duplicate OPPs There are two types of duplicate OPPs that get different behavior from the core: A) An earlier OPP is marked 'available' and has same freq/voltages as the new one. B) An earlier OPP with same frequency, but is marked 'unavailable' OR doesn't have same voltages as the new one. The OPP core returns 0 for the first one, but -EEXIST for the second. While the OPP core returns 0 for the first case, its callers don't free the newly allocated OPP structure which isn't used anymore. Fix that by returning -EBUSY instead of 0, but make the callers return 0 eventually. As this isn't a critical fix, its not getting marked for stable kernel. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:10:55 +08:00
}
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/* OPP to select on device suspend */
if (of_property_read_bool(np, "opp-suspend")) {
if (opp_table->suspend_opp) {
dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
__func__, opp_table->suspend_opp->rate,
new_opp->rate);
} else {
new_opp->suspend = true;
opp_table->suspend_opp = new_opp;
}
}
if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max)
opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
PM / OPP: Manage supply's voltage/current in a separate structure This is a preparatory step for multiple regulator per device support. Move the voltage/current variables to a new structure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:17 +08:00
__func__, new_opp->turbo, new_opp->rate,
PM / OPP: Add infrastructure to manage multiple regulators This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 18:58:19 +08:00
new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min,
new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/*
* Notify the changes in the availability of the operable
* frequency/voltage list.
*/
PM / OPP: Move away from RCU locking The RCU locking isn't well suited for the OPP core. The RCU locking fits better for reader heavy stuff, while the OPP core have at max one or two readers only at a time. Over that, it was getting very confusing the way RCU locking was used with the OPP core. The individual OPPs are mostly well handled, i.e. for an update a new structure was created and then that replaced the older one. But the OPP tables were updated directly all the time from various parts of the core. Though they were mostly used from within RCU locked region, they didn't had much to do with RCU and were governed by the mutex instead. And that mixed with the 'opp_table_lock' has made the core even more confusing. Now that we are already managing the OPPs and the OPP tables with kernel reference infrastructure, we can get rid of RCU locking completely and simplify the code a lot. Remove all RCU references from code and comments. Acquire opp_table->lock while parsing the list of OPPs though. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-23 12:41:49 +08:00
blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADD, new_opp);
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
return new_opp;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
free_opp:
PM / OPP: Don't allocate OPP table from _opp_allocate() There is no point in trying to find/allocate the table for every OPP that is added for a device. It would be far more efficient to allocate the table only once and pass its pointer to the routines that add the OPP entry. Locking is removed from _opp_add_static_v2() and _opp_add_v1() now as the callers call them with that lock already held. Call to _remove_opp_table() routine is also removed from _opp_free() now, as opp_table isn't allocated from within _opp_allocate(). This is handled by the routines which created the OPP table in the first place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:11:01 +08:00
_opp_free(new_opp);
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
return ERR_PTR(ret);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
/* Initializes OPP tables based on new bindings */
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
{
struct device_node *np;
OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes When two or more devices are sharing their clock and voltage rails, they share the same OPP table. But there are some corner cases where the OPP core incorrectly creates separate OPP tables for them. For example, CPU 0 and 1 share clock/voltage rails. The platform specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP core creates an OPP table for it (the individual OPPs aren't initialized as of now). The same is repeated for CPU1 then. Because _opp_get_opp_table() doesn't compare DT node pointers currently, it fails to find the link between CPU0 and CPU1 and so creates a new OPP table. Fix this by calling _managed_opp() from _opp_get_opp_table(). _managed_opp() gain an additional argument (index) to get the right node pointer. This resulted in simplifying code in _of_add_opp_table_v2() as well. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-07 11:31:54 +08:00
int ret, count = 0, pstate_count = 0;
PM / OPP: Get performance state using genpd helper The genpd core provides an API now to retrieve the performance state from DT, use that instead of the ->get_pstate() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-18 18:17:46 +08:00
struct dev_pm_opp *opp;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes When two or more devices are sharing their clock and voltage rails, they share the same OPP table. But there are some corner cases where the OPP core incorrectly creates separate OPP tables for them. For example, CPU 0 and 1 share clock/voltage rails. The platform specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP core creates an OPP table for it (the individual OPPs aren't initialized as of now). The same is repeated for CPU1 then. Because _opp_get_opp_table() doesn't compare DT node pointers currently, it fails to find the link between CPU0 and CPU1 and so creates a new OPP table. Fix this by calling _managed_opp() from _opp_get_opp_table(). _managed_opp() gain an additional argument (index) to get the right node pointer. This resulted in simplifying code in _of_add_opp_table_v2() as well. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-07 11:31:54 +08:00
/* OPP table is already initialized for the device */
if (opp_table->parsed_static_opps) {
kref_get(&opp_table->list_kref);
return 0;
}
OPP: Create separate kref for static OPPs list The static OPPs don't always get freed with the OPP table, it can happen before that as well. For example, if the OPP table is first created using helpers like dev_pm_opp_set_supported_hw() and the OPPs are created at a later point. Now when the OPPs are removed, the OPP table stays until the time dev_pm_opp_put_supported_hw() is called. Later patches will streamline the freeing of OPP table and that requires the static OPPs to get freed with help of a separate kernel reference. This patch prepares for that by creating a separate kref for static OPPs list. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-11 13:44:11 +08:00
kref_init(&opp_table->list_kref);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/* We have opp-table node now, iterate over it and add OPPs */
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
for_each_available_child_of_node(opp_table->np, np) {
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
opp = _opp_add_static_v2(opp_table, dev, np);
if (IS_ERR(opp)) {
ret = PTR_ERR(opp);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
ret);
PM / OPP: Add missing of_node_put(np) The for_each_available_child_of_node() loop in _of_add_opp_table_v2() doesn't drop the reference to "np" on errors. Fix that. Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> [ VK: Improved commit log. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-04 14:05:03 +08:00
of_node_put(np);
OPP: Use a single mechanism to free the OPP table Currently there are two separate ways to free the OPP table based on how it is created in the first place. We call _dev_pm_opp_remove_table() to free the static and/or dynamic OPP, OPP list devices, etc. This is done for the case where the OPP table is added while initializing the OPPs, like via the path dev_pm_opp_of_add_table(). We also call dev_pm_opp_put_opp_table() in some cases which eventually frees the OPP table structure once the reference count reaches 0. This is used by the first case as well as other cases like dev_pm_opp_set_regulators() where the OPPs aren't necessarily initialized at this point. This whole thing is a bit unclear and messy and obstruct any further cleanup/fixup of OPP core. This patch tries to streamline this by keeping a single path for OPP table destruction, i.e. dev_pm_opp_put_opp_table(). All the cleanup happens in _opp_table_kref_release() now after the reference count reaches 0. _dev_pm_opp_remove_table() is removed as it isn't required anymore. We don't drop the reference to the OPP table after creating it from _of_add_opp_table_v{1|2}() anymore and the same is dropped only when we try to remove them. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 15:05:19 +08:00
goto put_list_kref;
PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added Currently the _of_add_opp_table_v2 call loops through the OPP nodes in the operating-points-v2 table in the device tree and calls _opp_add_static_v2 for each to add them to the table. It counts each iteration through this loop as an added OPP, however there are cases where _opp_add_static_v2() returns 0 but no new OPP is added to the list. This can happen while adding duplicate OPP or if the OPP isn't supported by hardware. Because of this the count variable will contain the number of OPP nodes in the table in device tree but not necessarily the ones that are actually added. As this count value is what is checked to determine if there are any valid OPPs, if a platform has an operating-points-v2 table with all OPP nodes containing opp-supported-hw values that are not currently supported, then _of_add_opp_table_v2 will fail to abort as it should due to an empty table. Additionally, since commit 3ba98324e81a ("PM / OPP: Get performance state using genpd helper"), the same count variable is compared against the number of OPPs containing performance states and requires that either all or none have pstates set, however in the case of any opp table that has any entries that do not get added by _opp_add_static_v2 due to incompatible opp-supported-hw fields, these numbers will not match and _of_add_opp_table_v2 will incorrectly fail. We need to clearly identify all the three cases (success, failure, unsupported/duplicate OPPs) and then increment count only on success case. Change return type of _opp_add_static_v2() to return the pointer to the newly added OPP instead of an integer. This routine now returns a valid pointer if the OPP is really added, NULL for unsupported or duplicate OPPs, and error value cased as a pointer on errors. Ideally the fixes tag in this commit should point back to the commit that introduced OPP v2 initially, as that's where we started incorrectly accounting for duplicate OPPs: commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings") But it wasn't a real problem until recently as the count was only used to check if any OPPs are added or not. And so this commit points to a rather recent commit where we added more code that depends on the value of "count". Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper") Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 18:43:15 +08:00
} else if (opp) {
count++;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
}
/* There should be one of more OPP defined */
PM / OPP: Don't allocate OPP table from _opp_allocate() There is no point in trying to find/allocate the table for every OPP that is added for a device. It would be far more efficient to allocate the table only once and pass its pointer to the routines that add the OPP entry. Locking is removed from _opp_add_static_v2() and _opp_add_v1() now as the callers call them with that lock already held. Call to _remove_opp_table() routine is also removed from _opp_free() now, as opp_table isn't allocated from within _opp_allocate(). This is handled by the routines which created the OPP table in the first place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:11:01 +08:00
if (WARN_ON(!count)) {
ret = -ENOENT;
OPP: Use a single mechanism to free the OPP table Currently there are two separate ways to free the OPP table based on how it is created in the first place. We call _dev_pm_opp_remove_table() to free the static and/or dynamic OPP, OPP list devices, etc. This is done for the case where the OPP table is added while initializing the OPPs, like via the path dev_pm_opp_of_add_table(). We also call dev_pm_opp_put_opp_table() in some cases which eventually frees the OPP table structure once the reference count reaches 0. This is used by the first case as well as other cases like dev_pm_opp_set_regulators() where the OPPs aren't necessarily initialized at this point. This whole thing is a bit unclear and messy and obstruct any further cleanup/fixup of OPP core. This patch tries to streamline this by keeping a single path for OPP table destruction, i.e. dev_pm_opp_put_opp_table(). All the cleanup happens in _opp_table_kref_release() now after the reference count reaches 0. _dev_pm_opp_remove_table() is removed as it isn't required anymore. We don't drop the reference to the OPP table after creating it from _of_add_opp_table_v{1|2}() anymore and the same is dropped only when we try to remove them. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 15:05:19 +08:00
goto put_list_kref;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
PM / OPP: Get performance state using genpd helper The genpd core provides an API now to retrieve the performance state from DT, use that instead of the ->get_pstate() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-18 18:17:46 +08:00
list_for_each_entry(opp, &opp_table->opp_list, node)
pstate_count += !!opp->pstate;
/* Either all or none of the nodes shall have performance state set */
if (pstate_count && pstate_count != count) {
dev_err(dev, "Not all nodes have performance state set (%d: %d)\n",
count, pstate_count);
ret = -ENOENT;
OPP: Use a single mechanism to free the OPP table Currently there are two separate ways to free the OPP table based on how it is created in the first place. We call _dev_pm_opp_remove_table() to free the static and/or dynamic OPP, OPP list devices, etc. This is done for the case where the OPP table is added while initializing the OPPs, like via the path dev_pm_opp_of_add_table(). We also call dev_pm_opp_put_opp_table() in some cases which eventually frees the OPP table structure once the reference count reaches 0. This is used by the first case as well as other cases like dev_pm_opp_set_regulators() where the OPPs aren't necessarily initialized at this point. This whole thing is a bit unclear and messy and obstruct any further cleanup/fixup of OPP core. This patch tries to streamline this by keeping a single path for OPP table destruction, i.e. dev_pm_opp_put_opp_table(). All the cleanup happens in _opp_table_kref_release() now after the reference count reaches 0. _dev_pm_opp_remove_table() is removed as it isn't required anymore. We don't drop the reference to the OPP table after creating it from _of_add_opp_table_v{1|2}() anymore and the same is dropped only when we try to remove them. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 15:05:19 +08:00
goto put_list_kref;
PM / OPP: Get performance state using genpd helper The genpd core provides an API now to retrieve the performance state from DT, use that instead of the ->get_pstate() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-18 18:17:46 +08:00
}
if (pstate_count)
opp_table->genpd_performance_state = true;
OPP: Parse OPP table's DT properties from _of_init_opp_table() Parse the DT properties present in the OPP table from _of_init_opp_table(), which is a dedicated routine for DT parsing. Minor relocation of helpers is required for this. It is possible now for _managed_opp() to return a partially initialized OPP table if the OPP table is created via the helpers like dev_pm_opp_set_supported_hw() and we need another flag to indicate if the static OPP are already parsed or not to make sure we don't incorrectly skip initializing the static OPPs. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-14 14:34:43 +08:00
opp_table->parsed_static_opps = true;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
OPP: Use a single mechanism to free the OPP table Currently there are two separate ways to free the OPP table based on how it is created in the first place. We call _dev_pm_opp_remove_table() to free the static and/or dynamic OPP, OPP list devices, etc. This is done for the case where the OPP table is added while initializing the OPPs, like via the path dev_pm_opp_of_add_table(). We also call dev_pm_opp_put_opp_table() in some cases which eventually frees the OPP table structure once the reference count reaches 0. This is used by the first case as well as other cases like dev_pm_opp_set_regulators() where the OPPs aren't necessarily initialized at this point. This whole thing is a bit unclear and messy and obstruct any further cleanup/fixup of OPP core. This patch tries to streamline this by keeping a single path for OPP table destruction, i.e. dev_pm_opp_put_opp_table(). All the cleanup happens in _opp_table_kref_release() now after the reference count reaches 0. _dev_pm_opp_remove_table() is removed as it isn't required anymore. We don't drop the reference to the OPP table after creating it from _of_add_opp_table_v{1|2}() anymore and the same is dropped only when we try to remove them. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 15:05:19 +08:00
return 0;
put_list_kref:
_put_opp_list_kref(opp_table);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
return ret;
}
/* Initializes OPP tables based on old-deprecated bindings */
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
{
const struct property *prop;
const __be32 *val;
PM / OPP: Don't allocate OPP table from _opp_allocate() There is no point in trying to find/allocate the table for every OPP that is added for a device. It would be far more efficient to allocate the table only once and pass its pointer to the routines that add the OPP entry. Locking is removed from _opp_add_static_v2() and _opp_add_v1() now as the callers call them with that lock already held. Call to _remove_opp_table() routine is also removed from _opp_free() now, as opp_table isn't allocated from within _opp_allocate(). This is handled by the routines which created the OPP table in the first place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:11:01 +08:00
int nr, ret = 0;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
prop = of_find_property(dev->of_node, "operating-points", NULL);
if (!prop)
return -ENODEV;
if (!prop->value)
return -ENODATA;
/*
* Each OPP is a set of tuples consisting of frequency and
* voltage like <freq-kHz vol-uV>.
*/
nr = prop->length / sizeof(u32);
if (nr % 2) {
dev_err(dev, "%s: Invalid OPP table\n", __func__);
return -EINVAL;
}
OPP: Create separate kref for static OPPs list The static OPPs don't always get freed with the OPP table, it can happen before that as well. For example, if the OPP table is first created using helpers like dev_pm_opp_set_supported_hw() and the OPPs are created at a later point. Now when the OPPs are removed, the OPP table stays until the time dev_pm_opp_put_supported_hw() is called. Later patches will streamline the freeing of OPP table and that requires the static OPPs to get freed with help of a separate kernel reference. This patch prepares for that by creating a separate kref for static OPPs list. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-11 13:44:11 +08:00
kref_init(&opp_table->list_kref);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
val = prop->value;
while (nr) {
unsigned long freq = be32_to_cpup(val++) * 1000;
unsigned long volt = be32_to_cpup(val++);
PM / OPP: Don't allocate OPP table from _opp_allocate() There is no point in trying to find/allocate the table for every OPP that is added for a device. It would be far more efficient to allocate the table only once and pass its pointer to the routines that add the OPP entry. Locking is removed from _opp_add_static_v2() and _opp_add_v1() now as the callers call them with that lock already held. Call to _remove_opp_table() routine is also removed from _opp_free() now, as opp_table isn't allocated from within _opp_allocate(). This is handled by the routines which created the OPP table in the first place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:11:01 +08:00
ret = _opp_add_v1(opp_table, dev, freq, volt, false);
PM / OPP: Error out on failing to add static OPPs for v1 bindings The code adding static OPPs for V2 bindings already does so. Make the V1 bindings specific code behave the same. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:10:58 +08:00
if (ret) {
dev_err(dev, "%s: Failed to add OPP %ld (%d)\n",
__func__, freq, ret);
OPP: Use a single mechanism to free the OPP table Currently there are two separate ways to free the OPP table based on how it is created in the first place. We call _dev_pm_opp_remove_table() to free the static and/or dynamic OPP, OPP list devices, etc. This is done for the case where the OPP table is added while initializing the OPPs, like via the path dev_pm_opp_of_add_table(). We also call dev_pm_opp_put_opp_table() in some cases which eventually frees the OPP table structure once the reference count reaches 0. This is used by the first case as well as other cases like dev_pm_opp_set_regulators() where the OPPs aren't necessarily initialized at this point. This whole thing is a bit unclear and messy and obstruct any further cleanup/fixup of OPP core. This patch tries to streamline this by keeping a single path for OPP table destruction, i.e. dev_pm_opp_put_opp_table(). All the cleanup happens in _opp_table_kref_release() now after the reference count reaches 0. _dev_pm_opp_remove_table() is removed as it isn't required anymore. We don't drop the reference to the OPP table after creating it from _of_add_opp_table_v{1|2}() anymore and the same is dropped only when we try to remove them. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 15:05:19 +08:00
_put_opp_list_kref(opp_table);
return ret;
PM / OPP: Error out on failing to add static OPPs for v1 bindings The code adding static OPPs for V2 bindings already does so. Make the V1 bindings specific code behave the same. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:10:58 +08:00
}
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
nr -= 2;
}
PM / OPP: Don't allocate OPP table from _opp_allocate() There is no point in trying to find/allocate the table for every OPP that is added for a device. It would be far more efficient to allocate the table only once and pass its pointer to the routines that add the OPP entry. Locking is removed from _opp_add_static_v2() and _opp_add_v1() now as the callers call them with that lock already held. Call to _remove_opp_table() routine is also removed from _opp_free() now, as opp_table isn't allocated from within _opp_allocate(). This is handled by the routines which created the OPP table in the first place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 17:11:01 +08:00
return ret;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
/**
* dev_pm_opp_of_add_table() - Initialize opp table from device tree
* @dev: device pointer used to lookup OPP table.
*
* Register the initial OPP table with the OPP library for given device.
*
* Return:
* 0 On success OR
* Duplicate OPPs (both freq and volt are same) and opp->available
* -EEXIST Freq are same and volt are different OR
* Duplicate OPPs (both freq and volt are same) and !opp->available
* -ENOMEM Memory allocation failure
* -ENODEV when 'operating-points' property is not found or is invalid data
* in device node.
* -ENODATA when empty 'operating-points' property is found
* -EINVAL when invalid entries are found in opp-v2 table
*/
int dev_pm_opp_of_add_table(struct device *dev)
{
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
struct opp_table *opp_table;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
int ret;
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
opp_table = dev_pm_opp_get_opp_table_indexed(dev, 0);
if (!opp_table)
return -ENOMEM;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/*
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
* OPPs have two version of bindings now. Also try the old (v1)
* bindings for backward compatibility with older dtbs.
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
*/
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
if (opp_table->np)
ret = _of_add_opp_table_v2(dev, opp_table);
else
ret = _of_add_opp_table_v1(dev, opp_table);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
if (ret)
dev_pm_opp_put_opp_table(opp_table);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
PM / OPP: Implement dev_pm_opp_of_add_table_indexed() The "operating-points-v2" property can contain a list of phandles now, specifically for the power domain providers that provide multiple domains. Add support to parse that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-26 13:15:46 +08:00
/**
* dev_pm_opp_of_add_table_indexed() - Initialize indexed opp table from device tree
* @dev: device pointer used to lookup OPP table.
* @index: Index number.
*
* Register the initial OPP table with the OPP library for given device only
* using the "operating-points-v2" property.
*
* Return:
* 0 On success OR
* Duplicate OPPs (both freq and volt are same) and opp->available
* -EEXIST Freq are same and volt are different OR
* Duplicate OPPs (both freq and volt are same) and !opp->available
* -ENOMEM Memory allocation failure
* -ENODEV when 'operating-points' property is not found or is invalid data
* in device node.
* -ENODATA when empty 'operating-points' property is found
* -EINVAL when invalid entries are found in opp-v2 table
*/
int dev_pm_opp_of_add_table_indexed(struct device *dev, int index)
{
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
struct opp_table *opp_table;
OPP: Allow same OPP table to be used for multiple genpd The OPP binding says: Property: operating-points-v2 ... This can contain more than one phandle for power domain providers that provide multiple power domains. That is, one phandle for each power domain. If only one phandle is available, then the same OPP table will be used for all power domains provided by the power domain provider. But the OPP core isn't allowing the same OPP table to be used for multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
2018-05-30 17:49:38 +08:00
int ret, count;
PM / OPP: Implement dev_pm_opp_of_add_table_indexed() The "operating-points-v2" property can contain a list of phandles now, specifically for the power domain providers that provide multiple domains. Add support to parse that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-26 13:15:46 +08:00
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
if (index) {
OPP: Allow same OPP table to be used for multiple genpd The OPP binding says: Property: operating-points-v2 ... This can contain more than one phandle for power domain providers that provide multiple power domains. That is, one phandle for each power domain. If only one phandle is available, then the same OPP table will be used for all power domains provided by the power domain provider. But the OPP core isn't allowing the same OPP table to be used for multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
2018-05-30 17:49:38 +08:00
/*
* If only one phandle is present, then the same OPP table
* applies for all index requests.
*/
count = of_count_phandle_with_args(dev->of_node,
"operating-points-v2", NULL);
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
if (count != 1)
return -ENODEV;
OPP: Allow same OPP table to be used for multiple genpd The OPP binding says: Property: operating-points-v2 ... This can contain more than one phandle for power domain providers that provide multiple power domains. That is, one phandle for each power domain. If only one phandle is available, then the same OPP table will be used for all power domains provided by the power domain provider. But the OPP core isn't allowing the same OPP table to be used for multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
2018-05-30 17:49:38 +08:00
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
index = 0;
OPP: Allow same OPP table to be used for multiple genpd The OPP binding says: Property: operating-points-v2 ... This can contain more than one phandle for power domain providers that provide multiple power domains. That is, one phandle for each power domain. If only one phandle is available, then the same OPP table will be used for all power domains provided by the power domain provider. But the OPP core isn't allowing the same OPP table to be used for multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
2018-05-30 17:49:38 +08:00
}
PM / OPP: Implement dev_pm_opp_of_add_table_indexed() The "operating-points-v2" property can contain a list of phandles now, specifically for the power domain providers that provide multiple domains. Add support to parse that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-26 13:15:46 +08:00
OPP: Pass OPP table to _of_add_opp_table_v{1|2}() Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar code to get the OPP table and their parent routine also parses the DT to find the OPP table's node pointer. This can be simplified by getting the OPP table in advance and then passing it as argument to these routines. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-12 13:51:17 +08:00
opp_table = dev_pm_opp_get_opp_table_indexed(dev, index);
if (!opp_table)
return -ENOMEM;
ret = _of_add_opp_table_v2(dev, opp_table);
if (ret)
dev_pm_opp_put_opp_table(opp_table);
PM / OPP: Implement dev_pm_opp_of_add_table_indexed() The "operating-points-v2" property can contain a list of phandles now, specifically for the power domain providers that provide multiple domains. Add support to parse that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-26 13:15:46 +08:00
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_indexed);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
/* CPU device specific helpers */
/**
* dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask
* @cpumask: cpumask for which OPP table needs to be removed
*
* This removes the OPP tables for CPUs present in the @cpumask.
* This should be used only to remove static entries created from DT.
*/
void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask)
{
OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table() Only one platform was depending on this feature and it is already updated now. Stop removing dynamic OPPs from _dev_pm_opp_remove_table(). This simplifies lot of paths and removes unnecessary parameters. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-13 15:44:36 +08:00
_dev_pm_opp_cpumask_remove_table(cpumask, -1);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
/**
* dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask
* @cpumask: cpumask for which OPP table needs to be added.
*
* This adds the OPP tables for CPUs present in the @cpumask.
*/
int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
{
struct device *cpu_dev;
OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table() The error handling wasn't appropriate in dev_pm_opp_of_cpumask_add_table(). For example it returns 0 on success and also for the case where cpumask is empty or cpu_device wasn't found for any of the CPUs. It should really return error on such cases, so that the callers can be aware of the outcome. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 17:42:06 +08:00
int cpu, ret;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table() The error handling wasn't appropriate in dev_pm_opp_of_cpumask_add_table(). For example it returns 0 on success and also for the case where cpumask is empty or cpu_device wasn't found for any of the CPUs. It should really return error on such cases, so that the callers can be aware of the outcome. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 17:42:06 +08:00
if (WARN_ON(cpumask_empty(cpumask)))
return -ENODEV;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
for_each_cpu(cpu, cpumask) {
cpu_dev = get_cpu_device(cpu);
if (!cpu_dev) {
pr_err("%s: failed to get cpu%d device\n", __func__,
cpu);
OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table() The error handling wasn't appropriate in dev_pm_opp_of_cpumask_add_table(). For example it returns 0 on success and also for the case where cpumask is empty or cpu_device wasn't found for any of the CPUs. It should really return error on such cases, so that the callers can be aware of the outcome. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 17:42:06 +08:00
ret = -ENODEV;
goto remove_table;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
ret = dev_pm_opp_of_add_table(cpu_dev);
if (ret) {
PM / OPP: OF: Use pr_debug() instead of pr_err() while adding OPP table Some platforms add the OPPs dynamically from platform specific drivers instead of getting them statically from DT. The cpufreq-dt driver already ignores the return value of dev_pm_opp_of_cpumask_add_table() to not error out for such cases, but we still end up printing error message from that routine. That's not nice. Convert the print message to use pr_debug() instead. Reported-by: Mason <slash.tmp@free.fr> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-12 11:51:49 +08:00
/*
* OPP may get registered dynamically, don't print error
* message here.
*/
pr_debug("%s: couldn't find opp table for cpu:%d, %d\n",
__func__, cpu, ret);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table() The error handling wasn't appropriate in dev_pm_opp_of_cpumask_add_table(). For example it returns 0 on success and also for the case where cpumask is empty or cpu_device wasn't found for any of the CPUs. It should really return error on such cases, so that the callers can be aware of the outcome. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 17:42:06 +08:00
goto remove_table;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
}
}
OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table() The error handling wasn't appropriate in dev_pm_opp_of_cpumask_add_table(). For example it returns 0 on success and also for the case where cpumask is empty or cpu_device wasn't found for any of the CPUs. It should really return error on such cases, so that the callers can be aware of the outcome. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03 17:42:06 +08:00
return 0;
remove_table:
/* Free all other OPPs */
_dev_pm_opp_cpumask_remove_table(cpumask, cpu);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
/*
* Works only for OPP v2 bindings.
*
* Returns -ENOENT if operating-points-v2 bindings aren't supported.
*/
/**
* dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with
* @cpu_dev using operating-points-v2
* bindings.
*
* @cpu_dev: CPU device for which we do this operation
* @cpumask: cpumask to update with information of sharing CPUs
*
* This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
*
* Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev.
*/
int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
struct cpumask *cpumask)
{
PM / OPP: Fix get sharing CPUs when hotplug is used We fail dev_pm_opp_of_get_sharing_cpus() when possible CPU device does not exist. This can happen on platforms where not all possible CPUs are available at start up ie. hotplugged out. The CPU device is not registered in the system so we are not able to check struct device to set the sharing CPUs bitmask properly. Example (real use case): 2 physical MIPS cores, 4 VPE, cpu0/2 run Linux and cpu1/3 are not available for Linux at boot up. cpufreq-dt driver + OPP v2 fail to register opp_table due to the fact there is no struct device for cpu1 (remains offline at bootup). To solve the bug, stop using device struct to check device_node. Instead get CPU device_node directly from device tree with of_get_cpu_node(). Signed-off-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-27 18:01:17 +08:00
struct device_node *np, *tmp_np, *cpu_np;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
int cpu, ret = 0;
/* Get OPP descriptor node */
PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API Rename _of_get_opp_desc_node to dev_pm_opp_of_get_opp_desc_node and add it to include/linux/pm_opp.h to allow other drivers, such as platform OPP and cpufreq drivers, to make use of it. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-04 01:29:26 +08:00
np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
if (!np) {
PM / OPP: fix debug/error messages in dev_pm_opp_of_get_sharing_cpus() These log messages are wrong because _of_get_opp_desc_node() returns an operating-points-v2 node. Commit a6eed752f5fb ("PM / OPP: passing NULL to PTR_ERR()") fixed static checker warnings, and reworded the messages at the same time (but the latter was not mentioned in the git-log). Restore the correct messages. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-20 15:12:49 +08:00
dev_dbg(cpu_dev, "%s: Couldn't find opp node.\n", __func__);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
return -ENOENT;
}
cpumask_set_cpu(cpu_dev->id, cpumask);
/* OPPs are shared ? */
if (!of_property_read_bool(np, "opp-shared"))
goto put_cpu_node;
for_each_possible_cpu(cpu) {
if (cpu == cpu_dev->id)
continue;
PM / OPP: add missing of_node_put() for of_get_cpu_node() Commit 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) moved away from using cpu_dev->of_node because of some limitations. However, commit 7467c9d95989 (of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered) added support to fall back to of_get_cpu_node() if called if CPUs are not registered yet. Add the missing of_node_put() for the CPU device nodes. Also go back to using of_cpu_device_node_get() in dev_pm_opp_of_get_sharing_cpus() to avoid scanning the device tree again. Acked-by: Viresh Kumar <vireshk@kernel.org> Fixes: 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-12 18:32:23 +08:00
cpu_np = of_cpu_device_node_get(cpu);
PM / OPP: Fix get sharing CPUs when hotplug is used We fail dev_pm_opp_of_get_sharing_cpus() when possible CPU device does not exist. This can happen on platforms where not all possible CPUs are available at start up ie. hotplugged out. The CPU device is not registered in the system so we are not able to check struct device to set the sharing CPUs bitmask properly. Example (real use case): 2 physical MIPS cores, 4 VPE, cpu0/2 run Linux and cpu1/3 are not available for Linux at boot up. cpufreq-dt driver + OPP v2 fail to register opp_table due to the fact there is no struct device for cpu1 (remains offline at bootup). To solve the bug, stop using device struct to check device_node. Instead get CPU device_node directly from device tree with of_get_cpu_node(). Signed-off-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-27 18:01:17 +08:00
if (!cpu_np) {
dev_err(cpu_dev, "%s: failed to get cpu%d node\n",
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
__func__, cpu);
PM / OPP: Fix get sharing CPUs when hotplug is used We fail dev_pm_opp_of_get_sharing_cpus() when possible CPU device does not exist. This can happen on platforms where not all possible CPUs are available at start up ie. hotplugged out. The CPU device is not registered in the system so we are not able to check struct device to set the sharing CPUs bitmask properly. Example (real use case): 2 physical MIPS cores, 4 VPE, cpu0/2 run Linux and cpu1/3 are not available for Linux at boot up. cpufreq-dt driver + OPP v2 fail to register opp_table due to the fact there is no struct device for cpu1 (remains offline at bootup). To solve the bug, stop using device struct to check device_node. Instead get CPU device_node directly from device tree with of_get_cpu_node(). Signed-off-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-27 18:01:17 +08:00
ret = -ENOENT;
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
goto put_cpu_node;
}
/* Get OPP descriptor node */
PM / OPP: Implement dev_pm_opp_of_add_table_indexed() The "operating-points-v2" property can contain a list of phandles now, specifically for the power domain providers that provide multiple domains. Add support to parse that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-26 13:15:46 +08:00
tmp_np = _opp_of_get_opp_desc_node(cpu_np, 0);
PM / OPP: add missing of_node_put() for of_get_cpu_node() Commit 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) moved away from using cpu_dev->of_node because of some limitations. However, commit 7467c9d95989 (of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered) added support to fall back to of_get_cpu_node() if called if CPUs are not registered yet. Add the missing of_node_put() for the CPU device nodes. Also go back to using of_cpu_device_node_get() in dev_pm_opp_of_get_sharing_cpus() to avoid scanning the device tree again. Acked-by: Viresh Kumar <vireshk@kernel.org> Fixes: 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-12 18:32:23 +08:00
of_node_put(cpu_np);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
if (!tmp_np) {
PM / OPP: Fix get sharing CPUs when hotplug is used We fail dev_pm_opp_of_get_sharing_cpus() when possible CPU device does not exist. This can happen on platforms where not all possible CPUs are available at start up ie. hotplugged out. The CPU device is not registered in the system so we are not able to check struct device to set the sharing CPUs bitmask properly. Example (real use case): 2 physical MIPS cores, 4 VPE, cpu0/2 run Linux and cpu1/3 are not available for Linux at boot up. cpufreq-dt driver + OPP v2 fail to register opp_table due to the fact there is no struct device for cpu1 (remains offline at bootup). To solve the bug, stop using device struct to check device_node. Instead get CPU device_node directly from device tree with of_get_cpu_node(). Signed-off-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-27 18:01:17 +08:00
pr_err("%pOF: Couldn't find opp node\n", cpu_np);
PM / OPP: Move CONFIG_OF dependent code in a separate file Recently, a few issues were noticed in the code where CONFIG_OF wasn't consistently used for many routines. The core file is big enough now and ifdef hackery makes it less readable. Move OF-specific code to another file and compile that only if CONFIG_OF is enabled. Compile-tested: - For ARM (exynos) with CONFIG_OF enabled - For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately) No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05 18:50:33 +08:00
ret = -ENOENT;
goto put_cpu_node;
}
/* CPUs are sharing opp node */
if (np == tmp_np)
cpumask_set_cpu(cpu, cpumask);
of_node_put(tmp_np);
}
put_cpu_node:
of_node_put(np);
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
PM / OPP: Implement of_dev_pm_opp_find_required_opp() A device's DT node or its OPP nodes can contain a phandle to other device's OPP node, in the "required-opps" property. This patch implements a routine to find that required OPP from the node that contains the "required-opps" property. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-29 17:48:36 +08:00
/**
* of_dev_pm_opp_find_required_opp() - Search for required OPP.
* @dev: The device whose OPP node is referenced by the 'np' DT node.
* @np: Node that contains the "required-opps" property.
*
* Returns the OPP of the device 'dev', whose phandle is present in the "np"
* node. Although the "required-opps" property supports having multiple
* phandles, this helper routine only parses the very first phandle in the list.
*
* Return: Matching opp, else returns ERR_PTR in case of error and should be
* handled using IS_ERR.
*
* The callers are required to call dev_pm_opp_put() for the returned OPP after
* use.
*/
struct dev_pm_opp *of_dev_pm_opp_find_required_opp(struct device *dev,
struct device_node *np)
{
struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ENODEV);
struct device_node *required_np;
struct opp_table *opp_table;
opp_table = _find_opp_table(dev);
if (IS_ERR(opp_table))
return ERR_CAST(opp_table);
required_np = of_parse_phandle(np, "required-opps", 0);
if (unlikely(!required_np)) {
dev_err(dev, "Unable to parse required-opps\n");
goto put_opp_table;
}
mutex_lock(&opp_table->lock);
list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
if (temp_opp->available && temp_opp->np == required_np) {
opp = temp_opp;
/* Increment the reference count of OPP */
dev_pm_opp_get(opp);
break;
}
}
mutex_unlock(&opp_table->lock);
of_node_put(required_np);
put_opp_table:
dev_pm_opp_put_opp_table(opp_table);
return opp;
}
EXPORT_SYMBOL_GPL(of_dev_pm_opp_find_required_opp);
PM / OPP: Implement dev_pm_opp_get_of_node() This adds a new helper to let the power domain drivers to access opp->np, so that they can read platform specific properties from the node. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-12 12:33:45 +08:00
/**
* dev_pm_opp_get_of_node() - Gets the DT node corresponding to an opp
* @opp: opp for which DT node has to be returned for
*
* Return: DT node corresponding to the opp, else 0 on success.
*
* The caller needs to put the node with of_node_put() after using it.
*/
struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp)
{
if (IS_ERR_OR_NULL(opp)) {
pr_err("%s: Invalid parameters\n", __func__);
return NULL;
}
return of_node_get(opp->np);
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_of_node);