OpenCloudOS-Kernel/fs/btrfs/tree-log.h

111 lines
3.6 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2008 Oracle. All rights reserved.
*/
#ifndef BTRFS_TREE_LOG_H
#define BTRFS_TREE_LOG_H
#include "messages.h"
#include "ctree.h"
#include "transaction.h"
/* return value for btrfs_log_dentry_safe that means we don't need to log it at all */
#define BTRFS_NO_LOG_SYNC 256
/*
* We can't use the tree log for whatever reason, force a transaction commit.
* We use a negative value because there are functions through the logging code
* that need to return an error (< 0 value), false (0) or true (1). Any negative
* value will do, as it will cause the log to be marked for a full sync.
*/
#define BTRFS_LOG_FORCE_COMMIT (-(MAX_ERRNO + 1))
struct btrfs_log_ctx {
int log_ret;
int log_transid;
Btrfs: fix metadata inconsistencies after directory fsync We can get into inconsistency between inodes and directory entries after fsyncing a directory. The issue is that while a directory gets the new dentries persisted in the fsync log and replayed at mount time, the link count of the inode that directory entries point to doesn't get updated, staying with an incorrect link count (smaller then the correct value). This later leads to stale file handle errors when accessing (including attempt to delete) some of the links if all the other ones are removed, which also implies impossibility to delete the parent directories, since the dentries can not be removed. Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2), when fsyncing a directory, new files aren't logged (their metadata and dentries) nor any child directories. So this patch fixes this issue too, since it has the same resolution as the incorrect inode link count issue mentioned before. This is very easy to reproduce, and the following excerpt from my test case for xfstests shows how: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file and directory. $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io mkdir $SCRATCH_MNT/mydir # Make sure all metadata and data are durably persisted. sync # Add a hard link to 'foo' inside our test directory and fsync only the # directory. The btrfs fsync implementation had a bug that caused the new # directory entry to be visible after the fsync log replay but, the inode # of our file remained with a link count of 1. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2 # Add a few more links and new files. # This is just to verify nothing breaks or gives incorrect results after the # fsync log is replayed. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3 $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2 # Add some subdirectories and new files and links to them. This is to verify # that after fsyncing our top level directory 'mydir', all the subdirectories # and their files/links are registered in the fsync log and exist after the # fsync log is replayed. mkdir -p $SCRATCH_MNT/mydir/x/y/z ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link touch $SCRATCH_MNT/mydir/x/y/z/qwerty # Now fsync only our top directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir # And fsync now our new file named 'hello', just to verify later that it has # the expected content and that the previous fsync on the directory 'mydir' had # no bad influence on this fsync. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Verify the content of our file 'foo' remains the same as before, 8192 bytes, # all with the value 0xaa. echo "File 'foo' content after log replay:" od -t x1 $SCRATCH_MNT/foo # Remove the first name of our inode. Because of the directory fsync bug, the # inode's link count was 1 instead of 5, so removing the 'foo' name ended up # deleting the inode and the other names became stale directory entries (still # visible to applications). Attempting to remove or access the remaining # dentries pointing to that inode resulted in stale file handle errors and # made it impossible to remove the parent directories since it was impossible # for them to become empty. echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)" rm -f $SCRATCH_MNT/foo # Now verify that all files, links and directories created before fsyncing our # directory exist after the fsync log was replayed. [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing" [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing" [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing" [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing" [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \ echo "Link mydir/x/y/foo_y_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \ echo "Link mydir/x/y/z/foo_z_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \ echo "File mydir/x/y/z/qwerty is missing" # We expect our file here to have a size of 64Kb and all the bytes having the # value 0xff. echo "file 'hello' content after log replay:" od -t x1 $SCRATCH_MNT/hello # Now remove all files/links, under our test directory 'mydir', and verify we # can remove all the directories. rm -f $SCRATCH_MNT/mydir/x/y/z/* rmdir $SCRATCH_MNT/mydir/x/y/z rm -f $SCRATCH_MNT/mydir/x/y/* rmdir $SCRATCH_MNT/mydir/x/y rmdir $SCRATCH_MNT/mydir/x rm -f $SCRATCH_MNT/mydir/* rmdir $SCRATCH_MNT/mydir # An fsck, run by the fstests framework everytime a test finishes, also detected # the inconsistency and printed the following error message: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref # unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref status=0 exit The expected golden output for the test is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 5 file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 Which is the output after this patch and when running the test against ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's output is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 1 Link mydir/foo_2 is missing Link mydir/foo_3 is missing Link mydir/x/y/foo_y_link is missing Link mydir/x/y/z/foo_z_link is missing File mydir/x/y/z/qwerty is missing file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty Fsck, without this fix, also complains about the wrong link count: root 5 inode 257 errors 2001, no inode item, link count wrong unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref So fix this by logging the inodes that the dentries point to when fsyncing a directory. A test case for xfstests follows. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-03-21 01:19:46 +08:00
bool log_new_dentries;
btrfs: do not commit logs and transactions during link and rename operations Since commit d4682ba03ef618 ("Btrfs: sync log after logging new name") we started to commit logs, and fallback to transaction commits when we failed to log the new names or commit the logs, after link and rename operations when the target inodes (or their parents) were previously logged in the current transaction. This was to avoid losing directories despite an explicit fsync on them when they are ancestors of some inode that got a new named logged, due to a link or rename operation. However that adds the cost of starting IO and waiting for it to complete, which can cause higher latencies for applications. Instead of doing that, just make sure that when we log a new name for an inode we don't mark any of its ancestors as logged, so that if any one does an fsync against any of them, without doing any other change on them, the fsync commits the log. This way we only pay the cost of a log commit (or a transaction commit if something goes wrong or a new block group was created) if the application explicitly asks to fsync any of the parent directories. Using dbench, which mixes several filesystems operations including renames, revealed some significant latency gains. The following script that uses dbench was used to test this: #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-m single -d single" THREADS=16 echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -t 300 -D $MNT $THREADS umount $MNT The test was run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and using a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). Results before this patch: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 10750455 0.011 155.088 Close 7896674 0.001 0.243 Rename 455222 2.158 1101.947 Unlink 2171189 0.067 121.638 Deltree 256 2.425 7.816 Mkdir 128 0.002 0.003 Qpathinfo 9744323 0.006 21.370 Qfileinfo 1707092 0.001 0.146 Qfsinfo 1786756 0.001 11.228 Sfileinfo 875612 0.003 21.263 Find 3767281 0.025 9.617 WriteX 5356924 0.011 211.390 ReadX 16852694 0.003 9.442 LockX 35008 0.002 0.119 UnlockX 35008 0.001 0.138 Flush 753458 4.252 1102.249 Throughput 1128.35 MB/sec 16 clients 16 procs max_latency=1102.255 ms Results after this patch: 16 clients, after Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 11471098 0.012 448.281 Close 8426396 0.001 0.925 Rename 485746 0.123 267.183 Unlink 2316477 0.080 63.433 Deltree 288 2.830 11.144 Mkdir 144 0.003 0.010 Qpathinfo 10397420 0.006 10.288 Qfileinfo 1822039 0.001 0.169 Qfsinfo 1906497 0.002 14.039 Sfileinfo 934433 0.004 2.438 Find 4019879 0.026 10.200 WriteX 5718932 0.011 200.985 ReadX 17981671 0.003 10.036 LockX 37352 0.002 0.076 UnlockX 37352 0.001 0.109 Flush 804018 5.015 778.033 Throughput 1201.98 MB/sec 16 clients 16 procs max_latency=778.036 ms (+6.5% throughput, -29.4% max latency, -75.8% rename latency) Test case generic/498 from fstests tests the scenario that the previously mentioned commit fixed. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:48 +08:00
bool logging_new_name;
btrfs: use delayed items when logging a directory When logging a directory we start by flushing all its delayed items. That results in adding dir index items to the subvolume btree, for new dentries, and removing dir index items from the subvolume btree for any dentries that were deleted. This makes it straightforward to log a directory simply by iterating over all the modified subvolume btree leaves, especially when we used to log both dir index keys and dir item keys (before commit 339d035424849c ("btrfs: only copy dir index keys when logging a directory") and when we used to copy old dir index entries for leaves modified in the current transaction (before commit 732d591a5d6c12 ("btrfs: stop copying old dir items when logging a directory")). From an efficiency point of view this has a couple of drawbacks: 1) Adds extra latency, due to copying delayed items to the subvolume btree and deleting dir index items from the btree. Further if there are other tasks accessing the btree, which is common (syscalls like creat, mkdir, rename, link, unlink, truncate, reflinks, etc, finishing an ordered extent, etc), lock contention can cause further delays, both to the task logging a directory and to the other tasks accessing the btree; 2) More time spent overall flushing delayed items, if after logging the directory further changes are done to the directory in the same transaction. For example, if we add 10 dentries to a directory, fsync it, add more 10 dentries, fsync it again, then add more 10 dentries and fsync it again, then we end up inserting 3 batches of 10 items to the subvolume btree. With the changes from this patch, we flush all the delayed items to the btree only once - a single batch of 30 items, and outside the logging code (transaction commit or when delayed items are flushed asynchronously). This change simply skips the flushing of delayed items every time we log a directory. Instead we copy the delayed insertion items directly to the log tree and delete delayed deletion items directly from the log tree. Therefore avoiding changing first the subvolume btree and then scanning it for new items to copy from it to the log tree and detecting deletions by observing gaps in consecutive dir index keys in subvolume btree leaves. Running the following tests on a non-debug kernel (Debian's default kernel config), on a box with a NVMe device, a 12 cores Intel CPU and 64G of ram, produced the results below. The results compare a branch without this patch and all the other patches it depends on versus the same branch with the patchset applied. The patchset is comprised of the following patches: btrfs: don't drop dir index range items when logging a directory btrfs: remove the root argument from log_new_dir_dentries() btrfs: update stale comment for log_new_dir_dentries() btrfs: free list element sooner at log_new_dir_dentries() btrfs: avoid memory allocation at log_new_dir_dentries() for common case btrfs: remove root argument from btrfs_delayed_item_reserve_metadata() btrfs: store index number instead of key in struct btrfs_delayed_item btrfs: remove unused logic when looking up delayed items btrfs: shrink the size of struct btrfs_delayed_item btrfs: search for last logged dir index if it's not cached in the inode btrfs: move need_log_inode() to above log_conflicting_inodes() btrfs: move log_new_dir_dentries() above btrfs_log_inode() btrfs: log conflicting inodes without holding log mutex of the initial inode btrfs: skip logging parent dir when conflicting inode is not a dir btrfs: use delayed items when logging a directory Custom test script for testing time spent at btrfs_log_inode(): #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 # Total number of files to create in the test directory. NUM_FILES=10000 # Fsync after creating or renaming N files. FSYNC_AFTER=100 umount $DEV &> /dev/null mkfs.btrfs -f $DEV mount -o ssd $DEV $MNT TEST_DIR=$MNT/testdir mkdir $TEST_DIR echo "Creating files..." for ((i = 1; i <= $NUM_FILES; i++)); do echo -n > $TEST_DIR/file_$i if (( ($i % $FSYNC_AFTER) == 0 )); then xfs_io -c "fsync" $TEST_DIR fi done sync echo "Renaming files..." for ((i = 1; i <= $NUM_FILES; i++)); do mv $TEST_DIR/file_$i $TEST_DIR/file_$i.renamed if (( ($i % $FSYNC_AFTER) == 0 )); then xfs_io -c "fsync" $TEST_DIR fi done umount $MNT And using the following bpftrace script to capture the total time that is spent at btrfs_log_inode(): #!/usr/bin/bpftrace k:btrfs_log_inode { @start_log_inode[tid] = nsecs; } kr:btrfs_log_inode /@start_log_inode[tid]/ { $dur = (nsecs - @start_log_inode[tid]) / 1000; @btrfs_log_inode_total_time = sum($dur); delete(@start_log_inode[tid]); } END { clear(@start_log_inode); } Result before applying patchset: @btrfs_log_inode_total_time: 622642 Result after applying patchset: @btrfs_log_inode_total_time: 354134 (-43.1% time spent) The following dbench script was also used for testing: #!/bin/bash NUM_JOBS=$(nproc --all) DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT --skip-cleanup -t 120 -S $NUM_JOBS umount $MNT Before patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 3322265 0.034 21.032 Close 2440562 0.002 0.994 Rename 140664 1.150 269.633 Unlink 670796 1.093 269.678 Deltree 96 5.481 15.510 Mkdir 48 0.004 0.052 Qpathinfo 3010924 0.014 8.127 Qfileinfo 528055 0.001 0.518 Qfsinfo 552113 0.003 0.372 Sfileinfo 270575 0.005 0.688 Find 1164176 0.052 13.931 WriteX 1658537 0.019 5.918 ReadX 5207412 0.003 1.034 LockX 10818 0.003 0.079 UnlockX 10818 0.002 0.313 Flush 232811 1.027 269.735 Throughput 869.867 MB/sec (sync dirs) 12 clients 12 procs max_latency=269.741 ms After patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 4152738 0.029 20.863 Close 3050770 0.002 1.119 Rename 175829 0.871 211.741 Unlink 838447 0.845 211.724 Deltree 120 4.798 14.162 Mkdir 60 0.003 0.005 Qpathinfo 3763807 0.011 4.673 Qfileinfo 660111 0.001 0.400 Qfsinfo 690141 0.003 0.429 Sfileinfo 338260 0.005 0.725 Find 1455273 0.046 6.787 WriteX 2073307 0.017 5.690 ReadX 6509193 0.003 1.171 LockX 13522 0.003 0.077 UnlockX 13522 0.002 0.125 Flush 291044 0.811 211.631 Throughput 1089.27 MB/sec (sync dirs) 12 clients 12 procs max_latency=211.750 ms (+25.2% throughput, -21.5% max latency) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-22 18:51:44 +08:00
bool logging_new_delayed_dentries;
btrfs: avoid inode logging during rename and link when possible During a rename or link operation, we need to determine if an inode was previously logged or not, and if it was, do some update to the logged inode. We used to rely exclusively on the logged_trans field of struct btrfs_inode to determine that, but that was not reliable because the value of that field is not persisted in the inode item, so it's lost when an inode is evicted and loaded back again. That led to several issues in the past, such as not persisting deletions (such as the case fixed by commit 803f0f64d17769 ("Btrfs: fix fsync not persisting dentry deletions due to inode evictions")), or resulting in losing a file after an inode eviction followed by a rename (commit ecc64fab7d49c6 ("btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction")), besides other issues. So the inode_logged() helper was introduced and used to determine if an inode was possibly logged before in the current transaction, with the caveat that it could return false positives, in the sense that even if an inode was not logged before in the current transaction, it could still return true, but never to return false in case the inode was logged. >From a functional point of view that is fine, but from a performance perspective it can introduce significant latencies to rename and link operations, as they will end up doing inode logging even when it is not necessary. Recently on a 5.15 kernel, an openSUSE Tumbleweed user reported package installations and upgrades, with the zypper tool, were often taking a long time to complete. With strace it could be observed that zypper was spending about 99% of its time on rename operations, and then with further analysis we checked that directory logging was happening too frequently. Taking into account that installation/upgrade of some of the packages needed a few thousand file renames, the slowdown was very noticeable for the user. The issue was caused indirectly due to an excessive number of inode evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14 or a 5.16-rc8 kernel. While triggering the inode evictions if something outside btrfs' control, btrfs could still behave better by eliminating the false positives from the inode_logged() helper. So change inode_logged() to actually eliminate such false positives caused by inode eviction and when an inode was never logged since the filesystem was mounted, as both cases relate to when the logged_trans field of struct btrfs_inode has a value of zero. When it can not determine if the inode was logged based only on the logged_trans value, lookup for the existence of the inode item in the log tree - if it's there then we known the inode was logged, if it's not there then it can not have been logged in the current transaction. Once we determine if the inode was logged, update the logged_trans value to avoid future calls to have to search in the log tree again. Alternatively, we could start storing logged_trans in the on disk inode item structure (struct btrfs_inode_item) in the unused space it still has, but that would be a bit odd because: 1) We only care about logged_trans since the filesystem was mounted, we don't care about its value from a previous mount. Having it persisted in the inode item structure would not make the best use of the precious unused space; 2) In order to get logged_trans persisted before inode eviction, we would have to update the delayed inode when we finish logging the inode and update its logged_trans in struct btrfs_inode, which makes it a bit cumbersome since we need to check if the delayed inode exists, if not create it and populate it and deal with any errors (-ENOMEM mostly). This change is part of a patchset comprised of the following patches: 1/5 btrfs: add helper to delete a dir entry from a log tree 2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode 3/5 btrfs: avoid logging all directory changes during renames 4/5 btrfs: stop doing unnecessary log updates during a rename 5/5 btrfs: avoid inode logging during rename and link when possible The following test script mimics part of what the zypper tool does during package installations/upgrades. It does not triggers inode evictions, but it's similar because it triggers false positives from the inode_logged() helper, because the inodes have a logged_trans of 0, there's a log tree due to a fsync of an unrelated file and the directory inode has its last_trans field set to the current transaction: $ cat test.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 NUM_FILES=10000 mkfs.btrfs -f $DEV mount $DEV $MNT mkdir $MNT/testdir for ((i = 1; i <= $NUM_FILES; i++)); do echo -n > $MNT/testdir/file_$i done sync # Now do some change to an unrelated file and fsync it. # This is just to create a log tree to make sure that inode_logged() # does not return false when called against "testdir". xfs_io -f -c "pwrite 0 4K" -c "fsync" $MNT/foo # Do some change to testdir. This is to make sure inode_logged() # will return true when called against "testdir", because its # logged_trans is 0, it was changed in the current transaction # and there's a log tree. echo -n > $MNT/testdir/file_$((NUM_FILES + 1)) echo "Renaming $NUM_FILES files..." start=$(date +%s%N) for ((i = 1; i <= $NUM_FILES; i++)); do mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE done end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "Renames took $dur milliseconds" umount $MNT Testing this change on a box using a non-debug kernel (Debian's default kernel config) gave the following results: NUM_FILES=10000, before patchset: 27837 ms NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9236 ms (-66.8%) NUM_FILES=10000, after whole patchset applied: 8902 ms (-68.0%) NUM_FILES=5000, before patchset: 9127 ms NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4640 ms (-49.2%) NUM_FILES=5000, after whole patchset applied: 4441 ms (-51.3%) NUM_FILES=2000, before patchset: 2528 ms NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1983 ms (-21.6%) NUM_FILES=2000, after whole patchset applied: 1747 ms (-30.9%) NUM_FILES=1000, before patchset: 1085 ms NUM_FILES=1000, after patches 1/5 to 4/5 applied: 893 ms (-17.7%) NUM_FILES=1000, after whole patchset applied: 867 ms (-20.1%) Running dbench on the same physical machine with the following script: $ cat run-dbench.sh #!/bin/bash NUM_JOBS=$(nproc --all) DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 120 $NUM_JOBS umount $MNT Before patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 3761352 0.032 143.843 Close 2762770 0.002 2.273 Rename 159304 0.291 67.037 Unlink 759784 0.207 143.998 Deltree 72 4.028 15.977 Mkdir 36 0.003 0.006 Qpathinfo 3409780 0.013 9.678 Qfileinfo 596772 0.001 0.878 Qfsinfo 625189 0.003 1.245 Sfileinfo 306443 0.006 1.840 Find 1318106 0.063 19.798 WriteX 1871137 0.021 8.532 ReadX 5897325 0.003 3.567 LockX 12252 0.003 0.258 UnlockX 12252 0.002 0.100 Flush 263666 3.327 155.632 Throughput 980.047 MB/sec 12 clients 12 procs max_latency=155.636 ms After whole patchset applied: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 4195584 0.033 107.742 Close 3081932 0.002 1.935 Rename 177641 0.218 14.905 Unlink 847333 0.166 107.822 Deltree 118 5.315 15.247 Mkdir 59 0.004 0.048 Qpathinfo 3802612 0.014 10.302 Qfileinfo 666748 0.001 1.034 Qfsinfo 697329 0.003 0.944 Sfileinfo 341712 0.006 2.099 Find 1470365 0.065 9.359 WriteX 2093921 0.021 8.087 ReadX 6576234 0.003 3.407 LockX 13660 0.003 0.308 UnlockX 13660 0.002 0.114 Flush 294090 2.906 115.539 Throughput 1093.11 MB/sec 12 clients 12 procs max_latency=115.544 ms +11.5% throughput -25.8% max latency rename max latency -77.8% Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-20 19:00:10 +08:00
/* Indicate if the inode being logged was logged before. */
bool logged_before;
Btrfs: fix lockdep warning on deadlock against an inode's log mutex Commit 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink"), which landed in 4.8-rc2, introduced a possibility for a deadlock due to double locking of an inode's log mutex by the same task, which lockdep reports with: [23045.433975] ============================================= [23045.434748] [ INFO: possible recursive locking detected ] [23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted [23045.436044] --------------------------------------------- [23045.436044] xfs_io/3688 is trying to acquire lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] but task is already holding lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] other info that might help us debug this: [23045.436044] Possible unsafe locking scenario: [23045.436044] CPU0 [23045.436044] ---- [23045.436044] lock(&ei->log_mutex); [23045.436044] lock(&ei->log_mutex); [23045.436044] *** DEADLOCK *** [23045.436044] May be due to missing lock nesting notation [23045.436044] 3 locks held by xfs_io/3688: [23045.436044] #0: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs] [23045.436044] #1: (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0 [23045.436044] #2: (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] stack backtrace: [23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1 [23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [23045.436044] 0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70 [23045.436044] ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68 [23045.436044] 0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68 [23045.436044] Call Trace: [23045.436044] [<ffffffff8127074d>] dump_stack+0x67/0x90 [23045.436044] [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e [23045.436044] [<ffffffff8109155f>] ? mark_lock+0x24/0x201 [23045.436044] [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74 [23045.436044] [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs] [23045.436044] [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465 [23045.436044] [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs] [23045.436044] [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs] [23045.436044] [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs] [23045.436044] [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs] [23045.436044] [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs] [23045.436044] [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e [23045.436044] [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e [23045.436044] [<ffffffff811acc79>] do_fsync+0x31/0x4a [23045.436044] [<ffffffff811ace99>] SyS_fsync+0x10/0x14 [23045.436044] [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8 [23045.436044] [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa An example reproducer for this is: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/foo $ sync $ mv /mnt/dir/foo /mnt/dir/bar $ touch /mnt/dir/foo $ xfs_io -c "fsync" /mnt/dir/bar This is because while logging the inode of file bar we end up logging its parent directory (since its inode has an unlink_trans field matching the current transaction id due to the rename operation), which in turn logs the inodes for all its new dentries, so that the new inode for the new file named foo gets logged which in turn triggered another logging attempt for the inode we are fsync'ing, since that inode had an old name that corresponds to the name of the new inode. So fix this by ensuring that when logging the inode for a new dentry that has a name matching an old name of some other inode, we don't log again the original inode that we are fsync'ing. Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-24 04:13:51 +08:00
struct inode *inode;
struct list_head list;
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:58 +08:00
/* Only used for fast fsyncs. */
struct list_head ordered_extents;
btrfs: log conflicting inodes without holding log mutex of the initial inode When logging an inode, if we detect the inode has a reference that conflicts with some other inode that got renamed, we log that other inode while holding the log mutex of the current inode. We then find out if there are other inodes that conflict with the first conflicting inode, and log them while under the log mutex of the original inode. This is fine because the recursion can only happen once. For the upcoming work where we directly log delayed items without flushing them first to the subvolume tree, this recursion adds a lot of complexity and it's hard to keep lockdep happy about it. So collect a list of conflicting inodes and then log the inodes after unlocking the log mutex of the inode we started with. Also limit the maximum number of conflict inodes we log to 10, to avoid spending too much time logging (and maybe allocating too many list elements too), as typically we don't have more than 1 or 2 conflicting inodes - if we go over the limit, simply fallback to a transaction commit. It is possible to have a very long list of conflicting inodes to be intentionally created by a user if he/she creates a very long succession of renames like this: (...) rename E to F rename D to E rename C to D rename B to C rename A to B touch A (create a new file named A) fsync A If that happened for a sequence of hundreds or thousands of renames, it could massively slow down the logging and cause other secondary effects like for example blocking other fsync operations and transaction commits for a very long time (assuming it wouldn't run into -ENOSPC or -ENOMEM first). However such cases are very uncommon to happen in practice, nevertheless it's better to be prepared for them and avoid chaos. Such long sequence of conflicting inodes could be created before this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-17 19:22:46 +08:00
struct list_head conflict_inodes;
int num_conflict_inodes;
bool logging_conflict_inodes;
};
Btrfs: fix lockdep warning on deadlock against an inode's log mutex Commit 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink"), which landed in 4.8-rc2, introduced a possibility for a deadlock due to double locking of an inode's log mutex by the same task, which lockdep reports with: [23045.433975] ============================================= [23045.434748] [ INFO: possible recursive locking detected ] [23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted [23045.436044] --------------------------------------------- [23045.436044] xfs_io/3688 is trying to acquire lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] but task is already holding lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] other info that might help us debug this: [23045.436044] Possible unsafe locking scenario: [23045.436044] CPU0 [23045.436044] ---- [23045.436044] lock(&ei->log_mutex); [23045.436044] lock(&ei->log_mutex); [23045.436044] *** DEADLOCK *** [23045.436044] May be due to missing lock nesting notation [23045.436044] 3 locks held by xfs_io/3688: [23045.436044] #0: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs] [23045.436044] #1: (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0 [23045.436044] #2: (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] stack backtrace: [23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1 [23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [23045.436044] 0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70 [23045.436044] ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68 [23045.436044] 0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68 [23045.436044] Call Trace: [23045.436044] [<ffffffff8127074d>] dump_stack+0x67/0x90 [23045.436044] [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e [23045.436044] [<ffffffff8109155f>] ? mark_lock+0x24/0x201 [23045.436044] [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74 [23045.436044] [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs] [23045.436044] [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465 [23045.436044] [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs] [23045.436044] [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs] [23045.436044] [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs] [23045.436044] [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs] [23045.436044] [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs] [23045.436044] [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e [23045.436044] [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e [23045.436044] [<ffffffff811acc79>] do_fsync+0x31/0x4a [23045.436044] [<ffffffff811ace99>] SyS_fsync+0x10/0x14 [23045.436044] [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8 [23045.436044] [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa An example reproducer for this is: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/foo $ sync $ mv /mnt/dir/foo /mnt/dir/bar $ touch /mnt/dir/foo $ xfs_io -c "fsync" /mnt/dir/bar This is because while logging the inode of file bar we end up logging its parent directory (since its inode has an unlink_trans field matching the current transaction id due to the rename operation), which in turn logs the inodes for all its new dentries, so that the new inode for the new file named foo gets logged which in turn triggered another logging attempt for the inode we are fsync'ing, since that inode had an old name that corresponds to the name of the new inode. So fix this by ensuring that when logging the inode for a new dentry that has a name matching an old name of some other inode, we don't log again the original inode that we are fsync'ing. Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-24 04:13:51 +08:00
static inline void btrfs_init_log_ctx(struct btrfs_log_ctx *ctx,
struct inode *inode)
{
ctx->log_ret = 0;
ctx->log_transid = 0;
Btrfs: fix metadata inconsistencies after directory fsync We can get into inconsistency between inodes and directory entries after fsyncing a directory. The issue is that while a directory gets the new dentries persisted in the fsync log and replayed at mount time, the link count of the inode that directory entries point to doesn't get updated, staying with an incorrect link count (smaller then the correct value). This later leads to stale file handle errors when accessing (including attempt to delete) some of the links if all the other ones are removed, which also implies impossibility to delete the parent directories, since the dentries can not be removed. Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2), when fsyncing a directory, new files aren't logged (their metadata and dentries) nor any child directories. So this patch fixes this issue too, since it has the same resolution as the incorrect inode link count issue mentioned before. This is very easy to reproduce, and the following excerpt from my test case for xfstests shows how: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file and directory. $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io mkdir $SCRATCH_MNT/mydir # Make sure all metadata and data are durably persisted. sync # Add a hard link to 'foo' inside our test directory and fsync only the # directory. The btrfs fsync implementation had a bug that caused the new # directory entry to be visible after the fsync log replay but, the inode # of our file remained with a link count of 1. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2 # Add a few more links and new files. # This is just to verify nothing breaks or gives incorrect results after the # fsync log is replayed. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3 $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2 # Add some subdirectories and new files and links to them. This is to verify # that after fsyncing our top level directory 'mydir', all the subdirectories # and their files/links are registered in the fsync log and exist after the # fsync log is replayed. mkdir -p $SCRATCH_MNT/mydir/x/y/z ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link touch $SCRATCH_MNT/mydir/x/y/z/qwerty # Now fsync only our top directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir # And fsync now our new file named 'hello', just to verify later that it has # the expected content and that the previous fsync on the directory 'mydir' had # no bad influence on this fsync. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Verify the content of our file 'foo' remains the same as before, 8192 bytes, # all with the value 0xaa. echo "File 'foo' content after log replay:" od -t x1 $SCRATCH_MNT/foo # Remove the first name of our inode. Because of the directory fsync bug, the # inode's link count was 1 instead of 5, so removing the 'foo' name ended up # deleting the inode and the other names became stale directory entries (still # visible to applications). Attempting to remove or access the remaining # dentries pointing to that inode resulted in stale file handle errors and # made it impossible to remove the parent directories since it was impossible # for them to become empty. echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)" rm -f $SCRATCH_MNT/foo # Now verify that all files, links and directories created before fsyncing our # directory exist after the fsync log was replayed. [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing" [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing" [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing" [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing" [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \ echo "Link mydir/x/y/foo_y_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \ echo "Link mydir/x/y/z/foo_z_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \ echo "File mydir/x/y/z/qwerty is missing" # We expect our file here to have a size of 64Kb and all the bytes having the # value 0xff. echo "file 'hello' content after log replay:" od -t x1 $SCRATCH_MNT/hello # Now remove all files/links, under our test directory 'mydir', and verify we # can remove all the directories. rm -f $SCRATCH_MNT/mydir/x/y/z/* rmdir $SCRATCH_MNT/mydir/x/y/z rm -f $SCRATCH_MNT/mydir/x/y/* rmdir $SCRATCH_MNT/mydir/x/y rmdir $SCRATCH_MNT/mydir/x rm -f $SCRATCH_MNT/mydir/* rmdir $SCRATCH_MNT/mydir # An fsck, run by the fstests framework everytime a test finishes, also detected # the inconsistency and printed the following error message: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref # unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref status=0 exit The expected golden output for the test is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 5 file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 Which is the output after this patch and when running the test against ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's output is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 1 Link mydir/foo_2 is missing Link mydir/foo_3 is missing Link mydir/x/y/foo_y_link is missing Link mydir/x/y/z/foo_z_link is missing File mydir/x/y/z/qwerty is missing file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty Fsck, without this fix, also complains about the wrong link count: root 5 inode 257 errors 2001, no inode item, link count wrong unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref So fix this by logging the inodes that the dentries point to when fsyncing a directory. A test case for xfstests follows. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-03-21 01:19:46 +08:00
ctx->log_new_dentries = false;
btrfs: do not commit logs and transactions during link and rename operations Since commit d4682ba03ef618 ("Btrfs: sync log after logging new name") we started to commit logs, and fallback to transaction commits when we failed to log the new names or commit the logs, after link and rename operations when the target inodes (or their parents) were previously logged in the current transaction. This was to avoid losing directories despite an explicit fsync on them when they are ancestors of some inode that got a new named logged, due to a link or rename operation. However that adds the cost of starting IO and waiting for it to complete, which can cause higher latencies for applications. Instead of doing that, just make sure that when we log a new name for an inode we don't mark any of its ancestors as logged, so that if any one does an fsync against any of them, without doing any other change on them, the fsync commits the log. This way we only pay the cost of a log commit (or a transaction commit if something goes wrong or a new block group was created) if the application explicitly asks to fsync any of the parent directories. Using dbench, which mixes several filesystems operations including renames, revealed some significant latency gains. The following script that uses dbench was used to test this: #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-m single -d single" THREADS=16 echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -t 300 -D $MNT $THREADS umount $MNT The test was run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and using a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). Results before this patch: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 10750455 0.011 155.088 Close 7896674 0.001 0.243 Rename 455222 2.158 1101.947 Unlink 2171189 0.067 121.638 Deltree 256 2.425 7.816 Mkdir 128 0.002 0.003 Qpathinfo 9744323 0.006 21.370 Qfileinfo 1707092 0.001 0.146 Qfsinfo 1786756 0.001 11.228 Sfileinfo 875612 0.003 21.263 Find 3767281 0.025 9.617 WriteX 5356924 0.011 211.390 ReadX 16852694 0.003 9.442 LockX 35008 0.002 0.119 UnlockX 35008 0.001 0.138 Flush 753458 4.252 1102.249 Throughput 1128.35 MB/sec 16 clients 16 procs max_latency=1102.255 ms Results after this patch: 16 clients, after Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 11471098 0.012 448.281 Close 8426396 0.001 0.925 Rename 485746 0.123 267.183 Unlink 2316477 0.080 63.433 Deltree 288 2.830 11.144 Mkdir 144 0.003 0.010 Qpathinfo 10397420 0.006 10.288 Qfileinfo 1822039 0.001 0.169 Qfsinfo 1906497 0.002 14.039 Sfileinfo 934433 0.004 2.438 Find 4019879 0.026 10.200 WriteX 5718932 0.011 200.985 ReadX 17981671 0.003 10.036 LockX 37352 0.002 0.076 UnlockX 37352 0.001 0.109 Flush 804018 5.015 778.033 Throughput 1201.98 MB/sec 16 clients 16 procs max_latency=778.036 ms (+6.5% throughput, -29.4% max latency, -75.8% rename latency) Test case generic/498 from fstests tests the scenario that the previously mentioned commit fixed. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:48 +08:00
ctx->logging_new_name = false;
btrfs: use delayed items when logging a directory When logging a directory we start by flushing all its delayed items. That results in adding dir index items to the subvolume btree, for new dentries, and removing dir index items from the subvolume btree for any dentries that were deleted. This makes it straightforward to log a directory simply by iterating over all the modified subvolume btree leaves, especially when we used to log both dir index keys and dir item keys (before commit 339d035424849c ("btrfs: only copy dir index keys when logging a directory") and when we used to copy old dir index entries for leaves modified in the current transaction (before commit 732d591a5d6c12 ("btrfs: stop copying old dir items when logging a directory")). From an efficiency point of view this has a couple of drawbacks: 1) Adds extra latency, due to copying delayed items to the subvolume btree and deleting dir index items from the btree. Further if there are other tasks accessing the btree, which is common (syscalls like creat, mkdir, rename, link, unlink, truncate, reflinks, etc, finishing an ordered extent, etc), lock contention can cause further delays, both to the task logging a directory and to the other tasks accessing the btree; 2) More time spent overall flushing delayed items, if after logging the directory further changes are done to the directory in the same transaction. For example, if we add 10 dentries to a directory, fsync it, add more 10 dentries, fsync it again, then add more 10 dentries and fsync it again, then we end up inserting 3 batches of 10 items to the subvolume btree. With the changes from this patch, we flush all the delayed items to the btree only once - a single batch of 30 items, and outside the logging code (transaction commit or when delayed items are flushed asynchronously). This change simply skips the flushing of delayed items every time we log a directory. Instead we copy the delayed insertion items directly to the log tree and delete delayed deletion items directly from the log tree. Therefore avoiding changing first the subvolume btree and then scanning it for new items to copy from it to the log tree and detecting deletions by observing gaps in consecutive dir index keys in subvolume btree leaves. Running the following tests on a non-debug kernel (Debian's default kernel config), on a box with a NVMe device, a 12 cores Intel CPU and 64G of ram, produced the results below. The results compare a branch without this patch and all the other patches it depends on versus the same branch with the patchset applied. The patchset is comprised of the following patches: btrfs: don't drop dir index range items when logging a directory btrfs: remove the root argument from log_new_dir_dentries() btrfs: update stale comment for log_new_dir_dentries() btrfs: free list element sooner at log_new_dir_dentries() btrfs: avoid memory allocation at log_new_dir_dentries() for common case btrfs: remove root argument from btrfs_delayed_item_reserve_metadata() btrfs: store index number instead of key in struct btrfs_delayed_item btrfs: remove unused logic when looking up delayed items btrfs: shrink the size of struct btrfs_delayed_item btrfs: search for last logged dir index if it's not cached in the inode btrfs: move need_log_inode() to above log_conflicting_inodes() btrfs: move log_new_dir_dentries() above btrfs_log_inode() btrfs: log conflicting inodes without holding log mutex of the initial inode btrfs: skip logging parent dir when conflicting inode is not a dir btrfs: use delayed items when logging a directory Custom test script for testing time spent at btrfs_log_inode(): #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 # Total number of files to create in the test directory. NUM_FILES=10000 # Fsync after creating or renaming N files. FSYNC_AFTER=100 umount $DEV &> /dev/null mkfs.btrfs -f $DEV mount -o ssd $DEV $MNT TEST_DIR=$MNT/testdir mkdir $TEST_DIR echo "Creating files..." for ((i = 1; i <= $NUM_FILES; i++)); do echo -n > $TEST_DIR/file_$i if (( ($i % $FSYNC_AFTER) == 0 )); then xfs_io -c "fsync" $TEST_DIR fi done sync echo "Renaming files..." for ((i = 1; i <= $NUM_FILES; i++)); do mv $TEST_DIR/file_$i $TEST_DIR/file_$i.renamed if (( ($i % $FSYNC_AFTER) == 0 )); then xfs_io -c "fsync" $TEST_DIR fi done umount $MNT And using the following bpftrace script to capture the total time that is spent at btrfs_log_inode(): #!/usr/bin/bpftrace k:btrfs_log_inode { @start_log_inode[tid] = nsecs; } kr:btrfs_log_inode /@start_log_inode[tid]/ { $dur = (nsecs - @start_log_inode[tid]) / 1000; @btrfs_log_inode_total_time = sum($dur); delete(@start_log_inode[tid]); } END { clear(@start_log_inode); } Result before applying patchset: @btrfs_log_inode_total_time: 622642 Result after applying patchset: @btrfs_log_inode_total_time: 354134 (-43.1% time spent) The following dbench script was also used for testing: #!/bin/bash NUM_JOBS=$(nproc --all) DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT --skip-cleanup -t 120 -S $NUM_JOBS umount $MNT Before patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 3322265 0.034 21.032 Close 2440562 0.002 0.994 Rename 140664 1.150 269.633 Unlink 670796 1.093 269.678 Deltree 96 5.481 15.510 Mkdir 48 0.004 0.052 Qpathinfo 3010924 0.014 8.127 Qfileinfo 528055 0.001 0.518 Qfsinfo 552113 0.003 0.372 Sfileinfo 270575 0.005 0.688 Find 1164176 0.052 13.931 WriteX 1658537 0.019 5.918 ReadX 5207412 0.003 1.034 LockX 10818 0.003 0.079 UnlockX 10818 0.002 0.313 Flush 232811 1.027 269.735 Throughput 869.867 MB/sec (sync dirs) 12 clients 12 procs max_latency=269.741 ms After patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 4152738 0.029 20.863 Close 3050770 0.002 1.119 Rename 175829 0.871 211.741 Unlink 838447 0.845 211.724 Deltree 120 4.798 14.162 Mkdir 60 0.003 0.005 Qpathinfo 3763807 0.011 4.673 Qfileinfo 660111 0.001 0.400 Qfsinfo 690141 0.003 0.429 Sfileinfo 338260 0.005 0.725 Find 1455273 0.046 6.787 WriteX 2073307 0.017 5.690 ReadX 6509193 0.003 1.171 LockX 13522 0.003 0.077 UnlockX 13522 0.002 0.125 Flush 291044 0.811 211.631 Throughput 1089.27 MB/sec (sync dirs) 12 clients 12 procs max_latency=211.750 ms (+25.2% throughput, -21.5% max latency) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-22 18:51:44 +08:00
ctx->logging_new_delayed_dentries = false;
btrfs: avoid inode logging during rename and link when possible During a rename or link operation, we need to determine if an inode was previously logged or not, and if it was, do some update to the logged inode. We used to rely exclusively on the logged_trans field of struct btrfs_inode to determine that, but that was not reliable because the value of that field is not persisted in the inode item, so it's lost when an inode is evicted and loaded back again. That led to several issues in the past, such as not persisting deletions (such as the case fixed by commit 803f0f64d17769 ("Btrfs: fix fsync not persisting dentry deletions due to inode evictions")), or resulting in losing a file after an inode eviction followed by a rename (commit ecc64fab7d49c6 ("btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction")), besides other issues. So the inode_logged() helper was introduced and used to determine if an inode was possibly logged before in the current transaction, with the caveat that it could return false positives, in the sense that even if an inode was not logged before in the current transaction, it could still return true, but never to return false in case the inode was logged. >From a functional point of view that is fine, but from a performance perspective it can introduce significant latencies to rename and link operations, as they will end up doing inode logging even when it is not necessary. Recently on a 5.15 kernel, an openSUSE Tumbleweed user reported package installations and upgrades, with the zypper tool, were often taking a long time to complete. With strace it could be observed that zypper was spending about 99% of its time on rename operations, and then with further analysis we checked that directory logging was happening too frequently. Taking into account that installation/upgrade of some of the packages needed a few thousand file renames, the slowdown was very noticeable for the user. The issue was caused indirectly due to an excessive number of inode evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14 or a 5.16-rc8 kernel. While triggering the inode evictions if something outside btrfs' control, btrfs could still behave better by eliminating the false positives from the inode_logged() helper. So change inode_logged() to actually eliminate such false positives caused by inode eviction and when an inode was never logged since the filesystem was mounted, as both cases relate to when the logged_trans field of struct btrfs_inode has a value of zero. When it can not determine if the inode was logged based only on the logged_trans value, lookup for the existence of the inode item in the log tree - if it's there then we known the inode was logged, if it's not there then it can not have been logged in the current transaction. Once we determine if the inode was logged, update the logged_trans value to avoid future calls to have to search in the log tree again. Alternatively, we could start storing logged_trans in the on disk inode item structure (struct btrfs_inode_item) in the unused space it still has, but that would be a bit odd because: 1) We only care about logged_trans since the filesystem was mounted, we don't care about its value from a previous mount. Having it persisted in the inode item structure would not make the best use of the precious unused space; 2) In order to get logged_trans persisted before inode eviction, we would have to update the delayed inode when we finish logging the inode and update its logged_trans in struct btrfs_inode, which makes it a bit cumbersome since we need to check if the delayed inode exists, if not create it and populate it and deal with any errors (-ENOMEM mostly). This change is part of a patchset comprised of the following patches: 1/5 btrfs: add helper to delete a dir entry from a log tree 2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode 3/5 btrfs: avoid logging all directory changes during renames 4/5 btrfs: stop doing unnecessary log updates during a rename 5/5 btrfs: avoid inode logging during rename and link when possible The following test script mimics part of what the zypper tool does during package installations/upgrades. It does not triggers inode evictions, but it's similar because it triggers false positives from the inode_logged() helper, because the inodes have a logged_trans of 0, there's a log tree due to a fsync of an unrelated file and the directory inode has its last_trans field set to the current transaction: $ cat test.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 NUM_FILES=10000 mkfs.btrfs -f $DEV mount $DEV $MNT mkdir $MNT/testdir for ((i = 1; i <= $NUM_FILES; i++)); do echo -n > $MNT/testdir/file_$i done sync # Now do some change to an unrelated file and fsync it. # This is just to create a log tree to make sure that inode_logged() # does not return false when called against "testdir". xfs_io -f -c "pwrite 0 4K" -c "fsync" $MNT/foo # Do some change to testdir. This is to make sure inode_logged() # will return true when called against "testdir", because its # logged_trans is 0, it was changed in the current transaction # and there's a log tree. echo -n > $MNT/testdir/file_$((NUM_FILES + 1)) echo "Renaming $NUM_FILES files..." start=$(date +%s%N) for ((i = 1; i <= $NUM_FILES; i++)); do mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE done end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "Renames took $dur milliseconds" umount $MNT Testing this change on a box using a non-debug kernel (Debian's default kernel config) gave the following results: NUM_FILES=10000, before patchset: 27837 ms NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9236 ms (-66.8%) NUM_FILES=10000, after whole patchset applied: 8902 ms (-68.0%) NUM_FILES=5000, before patchset: 9127 ms NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4640 ms (-49.2%) NUM_FILES=5000, after whole patchset applied: 4441 ms (-51.3%) NUM_FILES=2000, before patchset: 2528 ms NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1983 ms (-21.6%) NUM_FILES=2000, after whole patchset applied: 1747 ms (-30.9%) NUM_FILES=1000, before patchset: 1085 ms NUM_FILES=1000, after patches 1/5 to 4/5 applied: 893 ms (-17.7%) NUM_FILES=1000, after whole patchset applied: 867 ms (-20.1%) Running dbench on the same physical machine with the following script: $ cat run-dbench.sh #!/bin/bash NUM_JOBS=$(nproc --all) DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 120 $NUM_JOBS umount $MNT Before patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 3761352 0.032 143.843 Close 2762770 0.002 2.273 Rename 159304 0.291 67.037 Unlink 759784 0.207 143.998 Deltree 72 4.028 15.977 Mkdir 36 0.003 0.006 Qpathinfo 3409780 0.013 9.678 Qfileinfo 596772 0.001 0.878 Qfsinfo 625189 0.003 1.245 Sfileinfo 306443 0.006 1.840 Find 1318106 0.063 19.798 WriteX 1871137 0.021 8.532 ReadX 5897325 0.003 3.567 LockX 12252 0.003 0.258 UnlockX 12252 0.002 0.100 Flush 263666 3.327 155.632 Throughput 980.047 MB/sec 12 clients 12 procs max_latency=155.636 ms After whole patchset applied: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 4195584 0.033 107.742 Close 3081932 0.002 1.935 Rename 177641 0.218 14.905 Unlink 847333 0.166 107.822 Deltree 118 5.315 15.247 Mkdir 59 0.004 0.048 Qpathinfo 3802612 0.014 10.302 Qfileinfo 666748 0.001 1.034 Qfsinfo 697329 0.003 0.944 Sfileinfo 341712 0.006 2.099 Find 1470365 0.065 9.359 WriteX 2093921 0.021 8.087 ReadX 6576234 0.003 3.407 LockX 13660 0.003 0.308 UnlockX 13660 0.002 0.114 Flush 294090 2.906 115.539 Throughput 1093.11 MB/sec 12 clients 12 procs max_latency=115.544 ms +11.5% throughput -25.8% max latency rename max latency -77.8% Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-20 19:00:10 +08:00
ctx->logged_before = false;
Btrfs: fix lockdep warning on deadlock against an inode's log mutex Commit 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink"), which landed in 4.8-rc2, introduced a possibility for a deadlock due to double locking of an inode's log mutex by the same task, which lockdep reports with: [23045.433975] ============================================= [23045.434748] [ INFO: possible recursive locking detected ] [23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted [23045.436044] --------------------------------------------- [23045.436044] xfs_io/3688 is trying to acquire lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] but task is already holding lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] other info that might help us debug this: [23045.436044] Possible unsafe locking scenario: [23045.436044] CPU0 [23045.436044] ---- [23045.436044] lock(&ei->log_mutex); [23045.436044] lock(&ei->log_mutex); [23045.436044] *** DEADLOCK *** [23045.436044] May be due to missing lock nesting notation [23045.436044] 3 locks held by xfs_io/3688: [23045.436044] #0: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs] [23045.436044] #1: (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0 [23045.436044] #2: (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] stack backtrace: [23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1 [23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [23045.436044] 0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70 [23045.436044] ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68 [23045.436044] 0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68 [23045.436044] Call Trace: [23045.436044] [<ffffffff8127074d>] dump_stack+0x67/0x90 [23045.436044] [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e [23045.436044] [<ffffffff8109155f>] ? mark_lock+0x24/0x201 [23045.436044] [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74 [23045.436044] [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs] [23045.436044] [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465 [23045.436044] [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs] [23045.436044] [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs] [23045.436044] [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs] [23045.436044] [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs] [23045.436044] [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs] [23045.436044] [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e [23045.436044] [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e [23045.436044] [<ffffffff811acc79>] do_fsync+0x31/0x4a [23045.436044] [<ffffffff811ace99>] SyS_fsync+0x10/0x14 [23045.436044] [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8 [23045.436044] [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa An example reproducer for this is: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/foo $ sync $ mv /mnt/dir/foo /mnt/dir/bar $ touch /mnt/dir/foo $ xfs_io -c "fsync" /mnt/dir/bar This is because while logging the inode of file bar we end up logging its parent directory (since its inode has an unlink_trans field matching the current transaction id due to the rename operation), which in turn logs the inodes for all its new dentries, so that the new inode for the new file named foo gets logged which in turn triggered another logging attempt for the inode we are fsync'ing, since that inode had an old name that corresponds to the name of the new inode. So fix this by ensuring that when logging the inode for a new dentry that has a name matching an old name of some other inode, we don't log again the original inode that we are fsync'ing. Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-24 04:13:51 +08:00
ctx->inode = inode;
INIT_LIST_HEAD(&ctx->list);
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:58 +08:00
INIT_LIST_HEAD(&ctx->ordered_extents);
btrfs: log conflicting inodes without holding log mutex of the initial inode When logging an inode, if we detect the inode has a reference that conflicts with some other inode that got renamed, we log that other inode while holding the log mutex of the current inode. We then find out if there are other inodes that conflict with the first conflicting inode, and log them while under the log mutex of the original inode. This is fine because the recursion can only happen once. For the upcoming work where we directly log delayed items without flushing them first to the subvolume tree, this recursion adds a lot of complexity and it's hard to keep lockdep happy about it. So collect a list of conflicting inodes and then log the inodes after unlocking the log mutex of the inode we started with. Also limit the maximum number of conflict inodes we log to 10, to avoid spending too much time logging (and maybe allocating too many list elements too), as typically we don't have more than 1 or 2 conflicting inodes - if we go over the limit, simply fallback to a transaction commit. It is possible to have a very long list of conflicting inodes to be intentionally created by a user if he/she creates a very long succession of renames like this: (...) rename E to F rename D to E rename C to D rename B to C rename A to B touch A (create a new file named A) fsync A If that happened for a sequence of hundreds or thousands of renames, it could massively slow down the logging and cause other secondary effects like for example blocking other fsync operations and transaction commits for a very long time (assuming it wouldn't run into -ENOSPC or -ENOMEM first). However such cases are very uncommon to happen in practice, nevertheless it's better to be prepared for them and avoid chaos. Such long sequence of conflicting inodes could be created before this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-17 19:22:46 +08:00
INIT_LIST_HEAD(&ctx->conflict_inodes);
ctx->num_conflict_inodes = 0;
ctx->logging_conflict_inodes = false;
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:58 +08:00
}
static inline void btrfs_release_log_ctx_extents(struct btrfs_log_ctx *ctx)
{
struct btrfs_ordered_extent *ordered;
struct btrfs_ordered_extent *tmp;
ASSERT(inode_is_locked(ctx->inode));
list_for_each_entry_safe(ordered, tmp, &ctx->ordered_extents, log_list) {
list_del_init(&ordered->log_list);
btrfs_put_ordered_extent(ordered);
}
}
static inline void btrfs_set_log_full_commit(struct btrfs_trans_handle *trans)
{
WRITE_ONCE(trans->fs_info->last_trans_log_full_commit, trans->transid);
}
static inline int btrfs_need_log_full_commit(struct btrfs_trans_handle *trans)
{
return READ_ONCE(trans->fs_info->last_trans_log_full_commit) ==
trans->transid;
}
int btrfs_sync_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_log_ctx *ctx);
int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root);
int btrfs_free_log_root_tree(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info);
int btrfs_recover_log_trees(struct btrfs_root *tree_root);
int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans,
struct dentry *dentry,
struct btrfs_log_ctx *ctx);
void btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
const struct fscrypt_str *name,
struct btrfs_inode *dir, u64 index);
void btrfs_del_inode_ref_in_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
const struct fscrypt_str *name,
struct btrfs_inode *inode, u64 dirid);
void btrfs_end_log_trans(struct btrfs_root *root);
void btrfs_pin_log_trans(struct btrfs_root *root);
Btrfs: tree logging unlink/rename fixes The tree logging code allows individual files or directories to be logged without including operations on other files and directories in the FS. It tries to commit the minimal set of changes to disk in order to fsync the single file or directory that was sent to fsync or O_SYNC. The tree logging code was allowing files and directories to be unlinked if they were part of a rename operation where only one directory in the rename was in the fsync log. This patch adds a few new rules to the tree logging. 1) on rename or unlink, if the inode being unlinked isn't in the fsync log, we must force a full commit before doing an fsync of the directory where the unlink was done. The commit isn't done during the unlink, but it is forced the next time we try to log the parent directory. Solution: record transid of last unlink/rename per directory when the directory wasn't already logged. For renames this is only done when renaming to a different directory. mkdir foo/some_dir normal commit rename foo/some_dir foo2/some_dir mkdir foo/some_dir fsync foo/some_dir/some_file The fsync above will unlink the original some_dir without recording it in its new location (foo2). After a crash, some_dir will be gone unless the fsync of some_file forces a full commit 2) we must log any new names for any file or dir that is in the fsync log. This way we make sure not to lose files that are unlinked during the same transaction. 2a) we must log any new names for any file or dir during rename when the directory they are being removed from was logged. 2a is actually the more important variant. Without the extra logging a crash might unlink the old name without recreating the new one 3) after a crash, we must go through any directories with a link count of zero and redo the rm -rf mkdir f1/foo normal commit rm -rf f1/foo fsync(f1) The directory f1 was fully removed from the FS, but fsync was never called on f1, only its parent dir. After a crash the rm -rf must be replayed. This must be able to recurse down the entire directory tree. The inode link count fixup code takes care of the ugly details. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 22:24:20 +08:00
void btrfs_record_unlink_dir(struct btrfs_trans_handle *trans,
struct btrfs_inode *dir, struct btrfs_inode *inode,
bool for_rename);
Btrfs: fix unreplayable log after snapshot delete + parent dir fsync If we delete a snapshot, fsync its parent directory and crash/power fail before the next transaction commit, on the next mount when we attempt to replay the log tree of the root containing the parent directory we will fail and prevent the filesystem from mounting, which is solvable by wiping out the log trees with the btrfs-zero-log tool but very inconvenient as we will lose any data and metadata fsynced before the parent directory was fsynced. For example: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ btrfs subvolume snapshot /mnt /mnt/testdir/snap $ btrfs subvolume delete /mnt/testdir/snap $ xfs_io -c "fsync" /mnt/testdir < crash / power failure and reboot > $ mount /dev/sdc /mnt mount: mount(2) failed: No such file or directory And in dmesg/syslog we get the following message and trace: [192066.361162] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [192066.363010] ------------[ cut here ]------------ [192066.365268] WARNING: CPU: 4 PID: 5130 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x17a/0x354 [btrfs]() [192066.367250] BTRFS: Transaction aborted (error -2) [192066.368401] Modules linked in: btrfs dm_flakey dm_mod ppdev sha256_generic xor raid6_pq hmac drbg ansi_cprng aesni_intel acpi_cpufreq tpm_tis aes_x86_64 tpm ablk_helper evdev cryptd sg parport_pc i2c_piix4 psmouse lrw parport i2c_core pcspkr gf128mul processor serio_raw glue_helper button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [192066.377154] CPU: 4 PID: 5130 Comm: mount Tainted: G W 4.4.0-rc6-btrfs-next-20+ #1 [192066.378875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [192066.380889] 0000000000000000 ffff880143923670 ffffffff81257570 ffff8801439236b8 [192066.382561] ffff8801439236a8 ffffffff8104ec07 ffffffffa039dc2c 00000000fffffffe [192066.384191] ffff8801ed31d000 ffff8801b9fc9c88 ffff8801086875e0 ffff880143923710 [192066.385827] Call Trace: [192066.386373] [<ffffffff81257570>] dump_stack+0x4e/0x79 [192066.387387] [<ffffffff8104ec07>] warn_slowpath_common+0x99/0xb2 [192066.388429] [<ffffffffa039dc2c>] ? __btrfs_unlink_inode+0x17a/0x354 [btrfs] [192066.389236] [<ffffffff8104ec68>] warn_slowpath_fmt+0x48/0x50 [192066.389884] [<ffffffffa039dc2c>] __btrfs_unlink_inode+0x17a/0x354 [btrfs] [192066.390621] [<ffffffff81184b55>] ? iput+0xb0/0x266 [192066.391200] [<ffffffffa039ea25>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [192066.391930] [<ffffffffa03ca623>] check_item_in_log+0x1fe/0x29b [btrfs] [192066.392715] [<ffffffffa03ca827>] replay_dir_deletes+0x167/0x1cf [btrfs] [192066.393510] [<ffffffffa03cccc7>] replay_one_buffer+0x417/0x570 [btrfs] [192066.394241] [<ffffffffa03ca164>] walk_up_log_tree+0x10e/0x1dc [btrfs] [192066.394958] [<ffffffffa03cac72>] walk_log_tree+0xa5/0x190 [btrfs] [192066.395628] [<ffffffffa03ce8b8>] btrfs_recover_log_trees+0x239/0x32c [btrfs] [192066.396790] [<ffffffffa03cc8b0>] ? replay_one_extent+0x50a/0x50a [btrfs] [192066.397891] [<ffffffffa0394041>] open_ctree+0x1d8b/0x2167 [btrfs] [192066.398897] [<ffffffffa03706e1>] btrfs_mount+0x5ef/0x729 [btrfs] [192066.399823] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf [192066.400739] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3 [192066.401700] [<ffffffff811714b9>] mount_fs+0x67/0x131 [192066.402482] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde [192066.403930] [<ffffffffa03702bd>] btrfs_mount+0x1cb/0x729 [btrfs] [192066.404831] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf [192066.405726] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3 [192066.406621] [<ffffffff811714b9>] mount_fs+0x67/0x131 [192066.407401] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde [192066.408247] [<ffffffff8118ae36>] do_mount+0x893/0x9d2 [192066.409047] [<ffffffff8113009b>] ? strndup_user+0x3f/0x8c [192066.409842] [<ffffffff8118b187>] SyS_mount+0x75/0xa1 [192066.410621] [<ffffffff8147e517>] entry_SYSCALL_64_fastpath+0x12/0x6b [192066.411572] ---[ end trace 2de42126c1e0a0f0 ]--- [192066.412344] BTRFS: error (device dm-0) in __btrfs_unlink_inode:3986: errno=-2 No such entry [192066.413748] BTRFS: error (device dm-0) in btrfs_replay_log:2464: errno=-2 No such entry (Failed to recover log tree) [192066.415458] BTRFS error (device dm-0): cleaner transaction attach returned -30 [192066.444613] BTRFS: open_ctree failed This happens because when we are replaying the log and processing the directory entry pointing to the snapshot in the subvolume tree, we treat its btrfs_dir_item item as having a location with a key type matching BTRFS_INODE_ITEM_KEY, which is wrong because the type matches BTRFS_ROOT_ITEM_KEY and therefore must be processed differently, as the object id refers to a root number and not to an inode in the root containing the parent directory. So fix this by triggering a transaction commit if an fsync against the parent directory is requested after deleting a snapshot. This is the simplest approach for a rare use case. Some alternative that avoids the transaction commit would require more code to explicitly delete the snapshot at log replay time (factoring out common code from ioctl.c: btrfs_ioctl_snap_destroy()), special care at fsync time to remove the log tree of the snapshot's root from the log root of the root of tree roots, amongst other steps. A test case for xfstests that triggers the issue follows. seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { _cleanup_flakey cd / rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter . ./common/dmflakey # real QA test starts here _need_to_be_root _supported_fs btrfs _supported_os Linux _require_scratch _require_dm_target flakey _require_metadata_journaling $SCRATCH_DEV rm -f $seqres.full _scratch_mkfs >>$seqres.full 2>&1 _init_flakey _mount_flakey # Create a snapshot at the root of our filesystem (mount point path), delete it, # fsync the mount point path, crash and mount to replay the log. This should # succeed and after the filesystem is mounted the snapshot should not be visible # anymore. _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap1 _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap1 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT _flakey_drop_and_remount [ -e $SCRATCH_MNT/snap1 ] && \ echo "Snapshot snap1 still exists after log replay" # Similar scenario as above, but this time the snapshot is created inside a # directory and not directly under the root (mount point path). mkdir $SCRATCH_MNT/testdir _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/testdir/snap2 _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/testdir/snap2 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir _flakey_drop_and_remount [ -e $SCRATCH_MNT/testdir/snap2 ] && \ echo "Snapshot snap2 still exists after log replay" _unmount_flakey echo "Silence is golden" status=0 exit Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-02-10 18:42:25 +08:00
void btrfs_record_snapshot_destroy(struct btrfs_trans_handle *trans,
struct btrfs_inode *dir);
btrfs: do not commit logs and transactions during link and rename operations Since commit d4682ba03ef618 ("Btrfs: sync log after logging new name") we started to commit logs, and fallback to transaction commits when we failed to log the new names or commit the logs, after link and rename operations when the target inodes (or their parents) were previously logged in the current transaction. This was to avoid losing directories despite an explicit fsync on them when they are ancestors of some inode that got a new named logged, due to a link or rename operation. However that adds the cost of starting IO and waiting for it to complete, which can cause higher latencies for applications. Instead of doing that, just make sure that when we log a new name for an inode we don't mark any of its ancestors as logged, so that if any one does an fsync against any of them, without doing any other change on them, the fsync commits the log. This way we only pay the cost of a log commit (or a transaction commit if something goes wrong or a new block group was created) if the application explicitly asks to fsync any of the parent directories. Using dbench, which mixes several filesystems operations including renames, revealed some significant latency gains. The following script that uses dbench was used to test this: #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-m single -d single" THREADS=16 echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -t 300 -D $MNT $THREADS umount $MNT The test was run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and using a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). Results before this patch: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 10750455 0.011 155.088 Close 7896674 0.001 0.243 Rename 455222 2.158 1101.947 Unlink 2171189 0.067 121.638 Deltree 256 2.425 7.816 Mkdir 128 0.002 0.003 Qpathinfo 9744323 0.006 21.370 Qfileinfo 1707092 0.001 0.146 Qfsinfo 1786756 0.001 11.228 Sfileinfo 875612 0.003 21.263 Find 3767281 0.025 9.617 WriteX 5356924 0.011 211.390 ReadX 16852694 0.003 9.442 LockX 35008 0.002 0.119 UnlockX 35008 0.001 0.138 Flush 753458 4.252 1102.249 Throughput 1128.35 MB/sec 16 clients 16 procs max_latency=1102.255 ms Results after this patch: 16 clients, after Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 11471098 0.012 448.281 Close 8426396 0.001 0.925 Rename 485746 0.123 267.183 Unlink 2316477 0.080 63.433 Deltree 288 2.830 11.144 Mkdir 144 0.003 0.010 Qpathinfo 10397420 0.006 10.288 Qfileinfo 1822039 0.001 0.169 Qfsinfo 1906497 0.002 14.039 Sfileinfo 934433 0.004 2.438 Find 4019879 0.026 10.200 WriteX 5718932 0.011 200.985 ReadX 17981671 0.003 10.036 LockX 37352 0.002 0.076 UnlockX 37352 0.001 0.109 Flush 804018 5.015 778.033 Throughput 1201.98 MB/sec 16 clients 16 procs max_latency=778.036 ms (+6.5% throughput, -29.4% max latency, -75.8% rename latency) Test case generic/498 from fstests tests the scenario that the previously mentioned commit fixed. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:48 +08:00
void btrfs_log_new_name(struct btrfs_trans_handle *trans,
struct dentry *old_dentry, struct btrfs_inode *old_dir,
btrfs: avoid logging all directory changes during renames When doing a rename of a file, if the file or its old parent directory were logged before, we log the new name of the file and then make sure we log the old parent directory, to ensure that after a log replay the old name of the file is deleted and the new name added. The logging of the old parent directory can take some time, because it will scan all leaves modified in the current transaction, check which directory entries were already logged, copy the ones that were not logged before, etc. In this rename context all we need to do is make sure that the old name of the file is deleted on log replay, so instead of triggering a directory log operation, we can just delete the old directory entry from the log if it's there, or in case it isn't there, just log a range item to signal log replay that the old name must be deleted. So change btrfs_log_new_name() to do that. This scenario is actually not uncommon to trigger, and recently on a 5.15 kernel, an openSUSE Tumbleweed user reported package installations and upgrades, with the zypper tool, were often taking a long time to complete, much more than usual. With strace it could be observed that zypper was spending over 99% of its time on rename operations, and then with further analysis we checked that directory logging was happening too frequently and causing high latencies for the rename operations. Taking into account that installation/upgrade of some of these packages needed about a few thousand file renames, the slowdown was very noticeable for the user. The issue was caused indirectly due to an excessive number of inode evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14 or a 5.16-rc8 kernel. After an inode eviction we can't tell for sure, in an efficient way, if an inode was previously logged in the current transaction, so we are pessimistic and assume it was, because in case it was we need to update the logged inode. More details on that in one of the patches in the same series (subject "btrfs: avoid inode logging during rename and link when possible"). Either way, in case the parent directory was logged before, we currently do more work then necessary during a rename, and this change minimizes that amount of work. The following script mimics part of what a package installation/upgrade with zypper does, which is basically renaming a lot of files, in some directory under /usr, to a name with a suffix of "-RPMDELETE": $ cat test.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 NUM_FILES=10000 mkfs.btrfs -f $DEV mount $DEV $MNT mkdir $MNT/testdir for ((i = 1; i <= $NUM_FILES; i++)); do echo -n > $MNT/testdir/file_$i done sync # Do some change to testdir and fsync it. echo -n > $MNT/testdir/file_$((NUM_FILES + 1)) xfs_io -c "fsync" $MNT/testdir echo "Renaming $NUM_FILES files..." start=$(date +%s%N) for ((i = 1; i <= $NUM_FILES; i++)); do mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE done end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "Renames took $dur milliseconds" umount $MNT Testing this change on box using a non-debug kernel (Debian's default kernel config) gave the following results: NUM_FILES=10000, before this patch: 27399 ms NUM_FILES=10000, after this patch: 9093 ms (-66.8%) NUM_FILES=5000, before this patch: 9241 ms NUM_FILES=5000, after this patch: 4642 ms (-49.8%) NUM_FILES=2000, before this patch: 2550 ms NUM_FILES=2000, after this patch: 1788 ms (-29.9%) NUM_FILES=1000, before this patch: 1088 ms NUM_FILES=1000, after this patch: 905 ms (-16.9%) Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-20 19:00:08 +08:00
u64 old_dir_index, struct dentry *parent);
#endif