OpenCloudOS-Kernel/arch/arm/mach-vexpress/tc2_pm.c

379 lines
9.7 KiB
C
Raw Normal View History

/*
* arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support
*
* Created by: Nicolas Pitre, October 2012
* Copyright: (C) 2012-2013 Linaro Limited
*
* Some portions of this file were originally written by Achin Gupta
* Copyright: (C) 2012 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/irqchip/arm-gic.h>
#include <asm/mcpm.h>
#include <asm/proc-fns.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/cp15.h>
#include <linux/arm-cci.h>
#include "spc.h"
/* SCC conf registers */
#define RESET_CTRL 0x018
#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu)))
#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu)))
#define A15_CONF 0x400
#define A7_CONF 0x500
#define SYS_INFO 0x700
#define SPC_BASE 0xb00
static void __iomem *scc;
/*
* We can't use regular spinlocks. In the switcher case, it is possible
* for an outbound CPU to call power_down() after its inbound counterpart
* is already live using the same logical CPU number which trips lockdep
* debugging.
*/
static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
#define TC2_CLUSTERS 2
#define TC2_MAX_CPUS_PER_CLUSTER 3
static unsigned int tc2_nr_cpus[TC2_CLUSTERS];
/* Keep per-cpu usage count to cope with unordered up/down requests */
static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS];
#define tc2_cluster_unused(cluster) \
(!tc2_pm_use_count[0][cluster] && \
!tc2_pm_use_count[1][cluster] && \
!tc2_pm_use_count[2][cluster])
static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster)
{
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster])
return -EINVAL;
/*
* Since this is called with IRQs enabled, and no arch_spin_lock_irq
* variant exists, we need to disable IRQs manually here.
*/
local_irq_disable();
arch_spin_lock(&tc2_pm_lock);
if (tc2_cluster_unused(cluster))
ve_spc_powerdown(cluster, false);
tc2_pm_use_count[cpu][cluster]++;
if (tc2_pm_use_count[cpu][cluster] == 1) {
ve_spc_set_resume_addr(cluster, cpu,
virt_to_phys(mcpm_entry_point));
ve_spc_cpu_wakeup_irq(cluster, cpu, true);
} else if (tc2_pm_use_count[cpu][cluster] != 2) {
/*
* The only possible values are:
* 0 = CPU down
* 1 = CPU (still) up
* 2 = CPU requested to be up before it had a chance
* to actually make itself down.
* Any other value is a bug.
*/
BUG();
}
arch_spin_unlock(&tc2_pm_lock);
local_irq_enable();
return 0;
}
static void tc2_pm_down(u64 residency)
{
unsigned int mpidr, cpu, cluster;
bool last_man = false, skip_wfi = false;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
__mcpm_cpu_going_down(cpu, cluster);
arch_spin_lock(&tc2_pm_lock);
BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
tc2_pm_use_count[cpu][cluster]--;
if (tc2_pm_use_count[cpu][cluster] == 0) {
ve_spc_cpu_wakeup_irq(cluster, cpu, true);
if (tc2_cluster_unused(cluster)) {
ve_spc_powerdown(cluster, true);
ve_spc_global_wakeup_irq(true);
last_man = true;
}
} else if (tc2_pm_use_count[cpu][cluster] == 1) {
/*
* A power_up request went ahead of us.
* Even if we do not want to shut this CPU down,
* the caller expects a certain state as if the WFI
* was aborted. So let's continue with cache cleaning.
*/
skip_wfi = true;
} else
BUG();
ARM: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down On the TC2 testchip, when all CPUs in a cluster enter standbywfi and commit a power down request, the power controller will wait for standbywfil2 coming from L2 cache controller to shut the cluster down. By the time all CPUs in a cluster commit a power down request and enter wfi, the power controller cannot backtrack, or put it another way, a CPU must not be allowed to complete execution independently of the power controller, the only way for it to resume properly must be upon wake-up IRQ pending and subsequent reset triggered from the power controller. Current MCPM back-end for TC2 disables the GIC CPU IF only when power down is committed through the tc2_pm_suspend() method, that makes sense since a suspended CPU is still online and can receive interrupts whereas a hotplugged CPU, since it is offline, migrated all IRQs and shutdown the per-CPU peripherals, hence their PPIs. The flaw with this reasoning is the following. If all CPUs in a clusters are entering a power down state either through CPU idle or CPU hotplug, when the last man successfully completes the MCPM power down sequence (and executes wfi), power controller waits for L2 wfi signal to quiesce the cluster and shut it down. If, when all CPUs are sitting in wfi, an online CPU hotplugs back in one of the CPUs in the cluster being shutdown, that CPU receives an IPI that causes wfi to complete (since tc2_pm_down() method does not disable the GIC CPU IF in that case - CPU being hotplugged out, not idle) and the power controller will never see the stanbywfil2 signal coming from L2 that is required for shutdown to happen and the system deadlocks. Further to this issue, kexec hotplugs secondary CPUs out during kernel reload/restart. Because kexec may (deliberately) trash the old kernel text, it is not OK for CPUs to follow the MCPM soft reboot path, since instructions after the WFI may have been replaced by kexec. If tc2_pm_down() does not disable the GIC cpu interface, there is a race between CPU powerdown in the old kernel and the IPI from the new kernel that triggers secondary boot, particularly if the powerdown is slow (due to L2 cache cleaning for example). If the new kernel wins the race, the affected CPU(s) will not really be reset and may execute garbage after the WFI. The only solution to this problem consists in disabling the GIC CPU IF on a CPU committed to power down regardless of the power down entry method (CPU hotplug or CPU idle). This way, CPU wake-up is under power controller control, which prevents unexpected wfi exit caused by a pending IRQ. This patch moves the GIC CPU IF disable call in the TC2 MCPM implementation from the tc2_pm_suspend() method to the tc2_pm_down() method to fix the mentioned race condition(s). Reviewed-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Dave Martin <Dave.Martin@arm.com> (for kexec) Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-27 23:54:42 +08:00
/*
* If the CPU is committed to power down, make sure
* the power controller will be in charge of waking it
* up upon IRQ, ie IRQ lines are cut from GIC CPU IF
* to the CPU by disabling the GIC CPU IF to prevent wfi
* from completing execution behind power controller back
*/
if (!skip_wfi)
gic_cpu_if_down();
if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
arch_spin_unlock(&tc2_pm_lock);
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
/*
* On the Cortex-A15 we need to disable
* L2 prefetching before flushing the cache.
*/
asm volatile(
"mcr p15, 1, %0, c15, c0, 3 \n\t"
"isb \n\t"
"dsb "
: : "r" (0x400) );
}
v7_exit_coherency_flush(all);
cci_disable_port_by_cpu(mpidr);
__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
} else {
/*
* If last man then undo any setup done previously.
*/
if (last_man) {
ve_spc_powerdown(cluster, false);
ve_spc_global_wakeup_irq(false);
}
arch_spin_unlock(&tc2_pm_lock);
v7_exit_coherency_flush(louis);
}
__mcpm_cpu_down(cpu, cluster);
/* Now we are prepared for power-down, do it: */
if (!skip_wfi)
wfi();
/* Not dead at this point? Let our caller cope. */
}
static void tc2_pm_power_down(void)
{
tc2_pm_down(0);
}
static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
{
u32 mask = cluster ?
RESET_A7_NCORERESET(cpu)
: RESET_A15_NCORERESET(cpu);
return !(readl_relaxed(scc + RESET_CTRL) & mask);
}
#define POLL_MSEC 10
#define TIMEOUT_MSEC 1000
static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
{
unsigned tries;
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
/*
* Only examine the hardware state if the target CPU has
* caught up at least as far as tc2_pm_down():
*/
if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
__func__, cpu, cluster,
readl_relaxed(scc + RESET_CTRL));
/*
* We need the CPU to reach WFI, but the power
* controller may put the cluster in reset and
* power it off as soon as that happens, before
* we have a chance to see STANDBYWFI.
*
* So we need to check for both conditions:
*/
if (tc2_core_in_reset(cpu, cluster) ||
ve_spc_cpu_in_wfi(cpu, cluster))
return 0; /* success: the CPU is halted */
}
/* Otherwise, wait and retry: */
msleep(POLL_MSEC);
}
return -ETIMEDOUT; /* timeout */
}
static void tc2_pm_suspend(u64 residency)
{
unsigned int mpidr, cpu, cluster;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
tc2_pm_down(residency);
}
static void tc2_pm_powered_up(void)
{
unsigned int mpidr, cpu, cluster;
unsigned long flags;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
local_irq_save(flags);
arch_spin_lock(&tc2_pm_lock);
if (tc2_cluster_unused(cluster)) {
ve_spc_powerdown(cluster, false);
ve_spc_global_wakeup_irq(false);
}
if (!tc2_pm_use_count[cpu][cluster])
tc2_pm_use_count[cpu][cluster] = 1;
ve_spc_cpu_wakeup_irq(cluster, cpu, false);
ve_spc_set_resume_addr(cluster, cpu, 0);
arch_spin_unlock(&tc2_pm_lock);
local_irq_restore(flags);
}
static const struct mcpm_platform_ops tc2_pm_power_ops = {
.power_up = tc2_pm_power_up,
.power_down = tc2_pm_power_down,
.power_down_finish = tc2_pm_power_down_finish,
.suspend = tc2_pm_suspend,
.powered_up = tc2_pm_powered_up,
};
static bool __init tc2_pm_usage_count_init(void)
{
unsigned int mpidr, cpu, cluster;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
pr_err("%s: boot CPU is out of bound!\n", __func__);
return false;
}
tc2_pm_use_count[cpu][cluster] = 1;
return true;
}
/*
* Enable cluster-level coherency, in preparation for turning on the MMU.
*/
static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
{
asm volatile (" \n"
" cmp r0, #1 \n"
" bxne lr \n"
" b cci_enable_port_for_self ");
}
static int __init tc2_pm_init(void)
{
int ret, irq;
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;
/*
* The power management-related features are hidden behind
* SCC registers. We need to extract runtime information like
* cluster ids and number of CPUs really available in clusters.
*/
np = of_find_compatible_node(NULL, NULL,
"arm,vexpress-scc,v2p-ca15_a7");
scc = of_iomap(np, 0);
if (!scc)
return -ENODEV;
a15_cluster_id = readl_relaxed(scc + A15_CONF) & 0xf;
a7_cluster_id = readl_relaxed(scc + A7_CONF) & 0xf;
if (a15_cluster_id >= TC2_CLUSTERS || a7_cluster_id >= TC2_CLUSTERS)
return -EINVAL;
sys_info = readl_relaxed(scc + SYS_INFO);
tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
irq = irq_of_parse_and_map(np, 0);
/*
* A subset of the SCC registers is also used to communicate
* with the SPC (power controller). We need to be able to
* drive it very early in the boot process to power up
* processors, so we initialize the SPC driver here.
*/
ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id, irq);
if (ret)
return ret;
if (!cci_probed())
return -ENODEV;
if (!tc2_pm_usage_count_init())
return -EINVAL;
ret = mcpm_platform_register(&tc2_pm_power_ops);
if (!ret) {
mcpm_sync_init(tc2_pm_power_up_setup);
pr_info("TC2 power management initialized\n");
}
return ret;
}
early_initcall(tc2_pm_init);