OpenCloudOS-Kernel/net/mac80211/rx.c

1522 lines
43 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
#include <linux/rcupdate.h>
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include "ieee80211_i.h"
#include "ieee80211_led.h"
#include "ieee80211_common.h"
#include "wep.h"
#include "wpa.h"
#include "tkip.h"
#include "wme.h"
/* pre-rx handlers
*
* these don't have dev/sdata fields in the rx data
* The sta value should also not be used because it may
* be NULL even though a STA (in IBSS mode) will be added.
*/
static ieee80211_txrx_result
ieee80211_rx_h_parse_qos(struct ieee80211_txrx_data *rx)
{
u8 *data = rx->skb->data;
int tid;
/* does the frame have a qos control field? */
if (WLAN_FC_IS_QOS_DATA(rx->fc)) {
u8 *qc = data + ieee80211_get_hdrlen(rx->fc) - QOS_CONTROL_LEN;
/* frame has qos control */
tid = qc[0] & QOS_CONTROL_TID_MASK;
} else {
if (unlikely((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)) {
/* Separate TID for management frames */
tid = NUM_RX_DATA_QUEUES - 1;
} else {
/* no qos control present */
tid = 0; /* 802.1d - Best Effort */
}
}
I802_DEBUG_INC(rx->local->wme_rx_queue[tid]);
/* only a debug counter, sta might not be assigned properly yet */
if (rx->sta)
I802_DEBUG_INC(rx->sta->wme_rx_queue[tid]);
rx->u.rx.queue = tid;
/* Set skb->priority to 1d tag if highest order bit of TID is not set.
* For now, set skb->priority to 0 for other cases. */
rx->skb->priority = (tid > 7) ? 0 : tid;
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_load_stats(struct ieee80211_txrx_data *rx)
{
struct ieee80211_local *local = rx->local;
struct sk_buff *skb = rx->skb;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
u32 load = 0, hdrtime;
struct ieee80211_rate *rate;
struct ieee80211_hw_mode *mode = local->hw.conf.mode;
int i;
/* Estimate total channel use caused by this frame */
if (unlikely(mode->num_rates < 0))
return TXRX_CONTINUE;
rate = &mode->rates[0];
for (i = 0; i < mode->num_rates; i++) {
if (mode->rates[i].val == rx->u.rx.status->rate) {
rate = &mode->rates[i];
break;
}
}
/* 1 bit at 1 Mbit/s takes 1 usec; in channel_use values,
* 1 usec = 1/8 * (1080 / 10) = 13.5 */
if (mode->mode == MODE_IEEE80211A ||
(mode->mode == MODE_IEEE80211G &&
rate->flags & IEEE80211_RATE_ERP))
hdrtime = CHAN_UTIL_HDR_SHORT;
else
hdrtime = CHAN_UTIL_HDR_LONG;
load = hdrtime;
if (!is_multicast_ether_addr(hdr->addr1))
load += hdrtime;
load += skb->len * rate->rate_inv;
/* Divide channel_use by 8 to avoid wrapping around the counter */
load >>= CHAN_UTIL_SHIFT;
local->channel_use_raw += load;
rx->u.rx.load = load;
return TXRX_CONTINUE;
}
ieee80211_rx_handler ieee80211_rx_pre_handlers[] =
{
ieee80211_rx_h_parse_qos,
ieee80211_rx_h_load_stats,
NULL
};
/* rx handlers */
static ieee80211_txrx_result
ieee80211_rx_h_if_stats(struct ieee80211_txrx_data *rx)
{
if (rx->sta)
rx->sta->channel_use_raw += rx->u.rx.load;
rx->sdata->channel_use_raw += rx->u.rx.load;
return TXRX_CONTINUE;
}
static void
ieee80211_rx_monitor(struct net_device *dev, struct sk_buff *skb,
struct ieee80211_rx_status *status)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_rate *rate;
struct ieee80211_rtap_hdr {
struct ieee80211_radiotap_header hdr;
u8 flags;
u8 rate;
__le16 chan_freq;
__le16 chan_flags;
u8 antsignal;
u8 padding_for_rxflags;
__le16 rx_flags;
} __attribute__ ((packed)) *rthdr;
skb->dev = dev;
if (status->flag & RX_FLAG_RADIOTAP)
goto out;
if (skb_headroom(skb) < sizeof(*rthdr)) {
I802_DEBUG_INC(local->rx_expand_skb_head);
if (pskb_expand_head(skb, sizeof(*rthdr), 0, GFP_ATOMIC)) {
dev_kfree_skb(skb);
return;
}
}
rthdr = (struct ieee80211_rtap_hdr *) skb_push(skb, sizeof(*rthdr));
memset(rthdr, 0, sizeof(*rthdr));
rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
rthdr->hdr.it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
(1 << IEEE80211_RADIOTAP_RATE) |
(1 << IEEE80211_RADIOTAP_CHANNEL) |
(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) |
(1 << IEEE80211_RADIOTAP_RX_FLAGS));
rthdr->flags = local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS ?
IEEE80211_RADIOTAP_F_FCS : 0;
/* FIXME: when radiotap gets a 'bad PLCP' flag use it here */
rthdr->rx_flags = 0;
if (status->flag &
(RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
rthdr->rx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADFCS);
rate = ieee80211_get_rate(local, status->phymode, status->rate);
if (rate)
rthdr->rate = rate->rate / 5;
rthdr->chan_freq = cpu_to_le16(status->freq);
rthdr->chan_flags =
status->phymode == MODE_IEEE80211A ?
cpu_to_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ) :
cpu_to_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ);
rthdr->antsignal = status->ssi;
out:
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
netif_rx(skb);
}
static ieee80211_txrx_result
ieee80211_rx_h_monitor(struct ieee80211_txrx_data *rx)
{
if (rx->sdata->type == IEEE80211_IF_TYPE_MNTR) {
ieee80211_rx_monitor(rx->dev, rx->skb, rx->u.rx.status);
return TXRX_QUEUED;
}
/*
* Drop frames with failed FCS/PLCP checksums here, they are only
* relevant for monitor mode, the rest of the stack should never
* see them.
*/
if (rx->u.rx.status->flag &
(RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
return TXRX_DROP;
if (rx->u.rx.status->flag & RX_FLAG_RADIOTAP)
skb_pull(rx->skb, ieee80211_get_radiotap_len(rx->skb->data));
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_passive_scan(struct ieee80211_txrx_data *rx)
{
struct ieee80211_local *local = rx->local;
struct sk_buff *skb = rx->skb;
if (unlikely(local->sta_scanning != 0)) {
ieee80211_sta_rx_scan(rx->dev, skb, rx->u.rx.status);
return TXRX_QUEUED;
}
if (unlikely(rx->flags & IEEE80211_TXRXD_RXIN_SCAN)) {
/* scanning finished during invoking of handlers */
I802_DEBUG_INC(local->rx_handlers_drop_passive_scan);
return TXRX_DROP;
}
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_check(struct ieee80211_txrx_data *rx)
{
struct ieee80211_hdr *hdr;
hdr = (struct ieee80211_hdr *) rx->skb->data;
/* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */
if (rx->sta && !is_multicast_ether_addr(hdr->addr1)) {
if (unlikely(rx->fc & IEEE80211_FCTL_RETRY &&
rx->sta->last_seq_ctrl[rx->u.rx.queue] ==
hdr->seq_ctrl)) {
if (rx->flags & IEEE80211_TXRXD_RXRA_MATCH) {
rx->local->dot11FrameDuplicateCount++;
rx->sta->num_duplicates++;
}
return TXRX_DROP;
} else
rx->sta->last_seq_ctrl[rx->u.rx.queue] = hdr->seq_ctrl;
}
if ((rx->local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) &&
rx->skb->len > FCS_LEN)
skb_trim(rx->skb, rx->skb->len - FCS_LEN);
if (unlikely(rx->skb->len < 16)) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_short);
return TXRX_DROP;
}
if (!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH))
rx->skb->pkt_type = PACKET_OTHERHOST;
else if (compare_ether_addr(rx->dev->dev_addr, hdr->addr1) == 0)
rx->skb->pkt_type = PACKET_HOST;
else if (is_multicast_ether_addr(hdr->addr1)) {
if (is_broadcast_ether_addr(hdr->addr1))
rx->skb->pkt_type = PACKET_BROADCAST;
else
rx->skb->pkt_type = PACKET_MULTICAST;
} else
rx->skb->pkt_type = PACKET_OTHERHOST;
/* Drop disallowed frame classes based on STA auth/assoc state;
* IEEE 802.11, Chap 5.5.
*
* 80211.o does filtering only based on association state, i.e., it
* drops Class 3 frames from not associated stations. hostapd sends
* deauth/disassoc frames when needed. In addition, hostapd is
* responsible for filtering on both auth and assoc states.
*/
if (unlikely(((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA ||
((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL &&
(rx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL)) &&
rx->sdata->type != IEEE80211_IF_TYPE_IBSS &&
(!rx->sta || !(rx->sta->flags & WLAN_STA_ASSOC)))) {
if ((!(rx->fc & IEEE80211_FCTL_FROMDS) &&
!(rx->fc & IEEE80211_FCTL_TODS) &&
(rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)
|| !(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) {
/* Drop IBSS frames and frames for other hosts
* silently. */
return TXRX_DROP;
}
if (!rx->local->apdev)
return TXRX_DROP;
ieee80211_rx_mgmt(rx->local, rx->skb, rx->u.rx.status,
ieee80211_msg_sta_not_assoc);
return TXRX_QUEUED;
}
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_load_key(struct ieee80211_txrx_data *rx)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
int keyidx;
int hdrlen;
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
struct ieee80211_key *stakey = NULL;
/*
* Key selection 101
*
* There are three types of keys:
* - GTK (group keys)
* - PTK (pairwise keys)
* - STK (station-to-station pairwise keys)
*
* When selecting a key, we have to distinguish between multicast
* (including broadcast) and unicast frames, the latter can only
* use PTKs and STKs while the former always use GTKs. Unless, of
* course, actual WEP keys ("pre-RSNA") are used, then unicast
* frames can also use key indizes like GTKs. Hence, if we don't
* have a PTK/STK we check the key index for a WEP key.
*
* Note that in a regular BSS, multicast frames are sent by the
* AP only, associated stations unicast the frame to the AP first
* which then multicasts it on their behalf.
*
* There is also a slight problem in IBSS mode: GTKs are negotiated
* with each station, that is something we don't currently handle.
* The spec seems to expect that one negotiates the same key with
* every station but there's no such requirement; VLANs could be
* possible.
*/
if (!(rx->fc & IEEE80211_FCTL_PROTECTED))
return TXRX_CONTINUE;
/*
* No point in finding a key if the frame is neither
* addressed to us nor a multicast frame.
*/
if (!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH))
return TXRX_CONTINUE;
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
if (rx->sta)
stakey = rcu_dereference(rx->sta->key);
if (!is_multicast_ether_addr(hdr->addr1) && stakey) {
rx->key = stakey;
} else {
/*
* The device doesn't give us the IV so we won't be
* able to look up the key. That's ok though, we
* don't need to decrypt the frame, we just won't
* be able to keep statistics accurate.
* Except for key threshold notifications, should
* we somehow allow the driver to tell us which key
* the hardware used if this flag is set?
*/
if ((rx->u.rx.status->flag & RX_FLAG_DECRYPTED) &&
(rx->u.rx.status->flag & RX_FLAG_IV_STRIPPED))
return TXRX_CONTINUE;
hdrlen = ieee80211_get_hdrlen(rx->fc);
if (rx->skb->len < 8 + hdrlen)
return TXRX_DROP; /* TODO: count this? */
/*
* no need to call ieee80211_wep_get_keyidx,
* it verifies a bunch of things we've done already
*/
keyidx = rx->skb->data[hdrlen + 3] >> 6;
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
rx->key = rcu_dereference(rx->sdata->keys[keyidx]);
/*
* RSNA-protected unicast frames should always be sent with
* pairwise or station-to-station keys, but for WEP we allow
* using a key index as well.
*/
if (rx->key && rx->key->conf.alg != ALG_WEP &&
!is_multicast_ether_addr(hdr->addr1))
rx->key = NULL;
}
if (rx->key) {
rx->key->tx_rx_count++;
/* TODO: add threshold stuff again */
}
return TXRX_CONTINUE;
}
static void ap_sta_ps_start(struct net_device *dev, struct sta_info *sta)
{
struct ieee80211_sub_if_data *sdata;
DECLARE_MAC_BUF(mac);
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
if (sdata->bss)
atomic_inc(&sdata->bss->num_sta_ps);
sta->flags |= WLAN_STA_PS;
sta->pspoll = 0;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %s aid %d enters power save mode\n",
dev->name, print_mac(mac, sta->addr), sta->aid);
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
}
static int ap_sta_ps_end(struct net_device *dev, struct sta_info *sta)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct sk_buff *skb;
int sent = 0;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_tx_packet_data *pkt_data;
DECLARE_MAC_BUF(mac);
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
if (sdata->bss)
atomic_dec(&sdata->bss->num_sta_ps);
sta->flags &= ~(WLAN_STA_PS | WLAN_STA_TIM);
sta->pspoll = 0;
if (!skb_queue_empty(&sta->ps_tx_buf)) {
if (local->ops->set_tim)
local->ops->set_tim(local_to_hw(local), sta->aid, 0);
if (sdata->bss)
bss_tim_clear(local, sdata->bss, sta->aid);
}
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %s aid %d exits power save mode\n",
dev->name, print_mac(mac, sta->addr), sta->aid);
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
/* Send all buffered frames to the station */
while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL) {
pkt_data = (struct ieee80211_tx_packet_data *) skb->cb;
sent++;
pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
dev_queue_xmit(skb);
}
while ((skb = skb_dequeue(&sta->ps_tx_buf)) != NULL) {
pkt_data = (struct ieee80211_tx_packet_data *) skb->cb;
local->total_ps_buffered--;
sent++;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %s aid %d send PS frame "
"since STA not sleeping anymore\n", dev->name,
print_mac(mac, sta->addr), sta->aid);
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
dev_queue_xmit(skb);
}
return sent;
}
static ieee80211_txrx_result
ieee80211_rx_h_sta_process(struct ieee80211_txrx_data *rx)
{
struct sta_info *sta = rx->sta;
struct net_device *dev = rx->dev;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
if (!sta)
return TXRX_CONTINUE;
/* Update last_rx only for IBSS packets which are for the current
* BSSID to avoid keeping the current IBSS network alive in cases where
* other STAs are using different BSSID. */
if (rx->sdata->type == IEEE80211_IF_TYPE_IBSS) {
u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len);
if (compare_ether_addr(bssid, rx->sdata->u.sta.bssid) == 0)
sta->last_rx = jiffies;
} else
if (!is_multicast_ether_addr(hdr->addr1) ||
rx->sdata->type == IEEE80211_IF_TYPE_STA) {
/* Update last_rx only for unicast frames in order to prevent
* the Probe Request frames (the only broadcast frames from a
* STA in infrastructure mode) from keeping a connection alive.
*/
sta->last_rx = jiffies;
}
if (!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH))
return TXRX_CONTINUE;
sta->rx_fragments++;
sta->rx_bytes += rx->skb->len;
sta->last_rssi = rx->u.rx.status->ssi;
sta->last_signal = rx->u.rx.status->signal;
sta->last_noise = rx->u.rx.status->noise;
if (!(rx->fc & IEEE80211_FCTL_MOREFRAGS)) {
/* Change STA power saving mode only in the end of a frame
* exchange sequence */
if ((sta->flags & WLAN_STA_PS) && !(rx->fc & IEEE80211_FCTL_PM))
rx->u.rx.sent_ps_buffered += ap_sta_ps_end(dev, sta);
else if (!(sta->flags & WLAN_STA_PS) &&
(rx->fc & IEEE80211_FCTL_PM))
ap_sta_ps_start(dev, sta);
}
/* Drop data::nullfunc frames silently, since they are used only to
* control station power saving mode. */
if ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
(rx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_NULLFUNC) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc);
/* Update counter and free packet here to avoid counting this
* as a dropped packed. */
sta->rx_packets++;
dev_kfree_skb(rx->skb);
return TXRX_QUEUED;
}
return TXRX_CONTINUE;
} /* ieee80211_rx_h_sta_process */
static ieee80211_txrx_result
ieee80211_rx_h_wep_weak_iv_detection(struct ieee80211_txrx_data *rx)
{
if (!rx->sta || !(rx->fc & IEEE80211_FCTL_PROTECTED) ||
(rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
!rx->key || rx->key->conf.alg != ALG_WEP ||
!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH))
return TXRX_CONTINUE;
/* Check for weak IVs, if hwaccel did not remove IV from the frame */
if (!(rx->u.rx.status->flag & RX_FLAG_IV_STRIPPED) ||
!(rx->u.rx.status->flag & RX_FLAG_DECRYPTED))
if (ieee80211_wep_is_weak_iv(rx->skb, rx->key))
rx->sta->wep_weak_iv_count++;
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_wep_decrypt(struct ieee80211_txrx_data *rx)
{
if ((rx->key && rx->key->conf.alg != ALG_WEP) ||
!(rx->fc & IEEE80211_FCTL_PROTECTED) ||
((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA &&
((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT ||
(rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_AUTH)))
return TXRX_CONTINUE;
if (!rx->key) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: RX WEP frame, but no key set\n",
rx->dev->name);
return TXRX_DROP;
}
if (!(rx->u.rx.status->flag & RX_FLAG_DECRYPTED)) {
if (ieee80211_wep_decrypt(rx->local, rx->skb, rx->key)) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: RX WEP frame, decrypt "
"failed\n", rx->dev->name);
return TXRX_DROP;
}
} else if (!(rx->u.rx.status->flag & RX_FLAG_IV_STRIPPED)) {
ieee80211_wep_remove_iv(rx->local, rx->skb, rx->key);
/* remove ICV */
skb_trim(rx->skb, rx->skb->len - 4);
}
return TXRX_CONTINUE;
}
static inline struct ieee80211_fragment_entry *
ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata,
unsigned int frag, unsigned int seq, int rx_queue,
struct sk_buff **skb)
{
struct ieee80211_fragment_entry *entry;
int idx;
idx = sdata->fragment_next;
entry = &sdata->fragments[sdata->fragment_next++];
if (sdata->fragment_next >= IEEE80211_FRAGMENT_MAX)
sdata->fragment_next = 0;
if (!skb_queue_empty(&entry->skb_list)) {
#ifdef CONFIG_MAC80211_DEBUG
struct ieee80211_hdr *hdr =
(struct ieee80211_hdr *) entry->skb_list.next->data;
DECLARE_MAC_BUF(mac);
DECLARE_MAC_BUF(mac2);
printk(KERN_DEBUG "%s: RX reassembly removed oldest "
"fragment entry (idx=%d age=%lu seq=%d last_frag=%d "
"addr1=%s addr2=%s\n",
sdata->dev->name, idx,
jiffies - entry->first_frag_time, entry->seq,
entry->last_frag, print_mac(mac, hdr->addr1),
print_mac(mac2, hdr->addr2));
#endif /* CONFIG_MAC80211_DEBUG */
__skb_queue_purge(&entry->skb_list);
}
__skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */
*skb = NULL;
entry->first_frag_time = jiffies;
entry->seq = seq;
entry->rx_queue = rx_queue;
entry->last_frag = frag;
entry->ccmp = 0;
entry->extra_len = 0;
return entry;
}
static inline struct ieee80211_fragment_entry *
ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
u16 fc, unsigned int frag, unsigned int seq,
int rx_queue, struct ieee80211_hdr *hdr)
{
struct ieee80211_fragment_entry *entry;
int i, idx;
idx = sdata->fragment_next;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) {
struct ieee80211_hdr *f_hdr;
u16 f_fc;
idx--;
if (idx < 0)
idx = IEEE80211_FRAGMENT_MAX - 1;
entry = &sdata->fragments[idx];
if (skb_queue_empty(&entry->skb_list) || entry->seq != seq ||
entry->rx_queue != rx_queue ||
entry->last_frag + 1 != frag)
continue;
f_hdr = (struct ieee80211_hdr *) entry->skb_list.next->data;
f_fc = le16_to_cpu(f_hdr->frame_control);
if ((fc & IEEE80211_FCTL_FTYPE) != (f_fc & IEEE80211_FCTL_FTYPE) ||
compare_ether_addr(hdr->addr1, f_hdr->addr1) != 0 ||
compare_ether_addr(hdr->addr2, f_hdr->addr2) != 0)
continue;
if (entry->first_frag_time + 2 * HZ < jiffies) {
__skb_queue_purge(&entry->skb_list);
continue;
}
return entry;
}
return NULL;
}
static ieee80211_txrx_result
ieee80211_rx_h_defragment(struct ieee80211_txrx_data *rx)
{
struct ieee80211_hdr *hdr;
u16 sc;
unsigned int frag, seq;
struct ieee80211_fragment_entry *entry;
struct sk_buff *skb;
DECLARE_MAC_BUF(mac);
hdr = (struct ieee80211_hdr *) rx->skb->data;
sc = le16_to_cpu(hdr->seq_ctrl);
frag = sc & IEEE80211_SCTL_FRAG;
if (likely((!(rx->fc & IEEE80211_FCTL_MOREFRAGS) && frag == 0) ||
(rx->skb)->len < 24 ||
is_multicast_ether_addr(hdr->addr1))) {
/* not fragmented */
goto out;
}
I802_DEBUG_INC(rx->local->rx_handlers_fragments);
seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
if (frag == 0) {
/* This is the first fragment of a new frame. */
entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
rx->u.rx.queue, &(rx->skb));
if (rx->key && rx->key->conf.alg == ALG_CCMP &&
(rx->fc & IEEE80211_FCTL_PROTECTED)) {
/* Store CCMP PN so that we can verify that the next
* fragment has a sequential PN value. */
entry->ccmp = 1;
memcpy(entry->last_pn,
rx->key->u.ccmp.rx_pn[rx->u.rx.queue],
CCMP_PN_LEN);
}
return TXRX_QUEUED;
}
/* This is a fragment for a frame that should already be pending in
* fragment cache. Add this fragment to the end of the pending entry.
*/
entry = ieee80211_reassemble_find(rx->sdata, rx->fc, frag, seq,
rx->u.rx.queue, hdr);
if (!entry) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
return TXRX_DROP;
}
/* Verify that MPDUs within one MSDU have sequential PN values.
* (IEEE 802.11i, 8.3.3.4.5) */
if (entry->ccmp) {
int i;
u8 pn[CCMP_PN_LEN], *rpn;
if (!rx->key || rx->key->conf.alg != ALG_CCMP)
return TXRX_DROP;
memcpy(pn, entry->last_pn, CCMP_PN_LEN);
for (i = CCMP_PN_LEN - 1; i >= 0; i--) {
pn[i]++;
if (pn[i])
break;
}
rpn = rx->key->u.ccmp.rx_pn[rx->u.rx.queue];
if (memcmp(pn, rpn, CCMP_PN_LEN) != 0) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: defrag: CCMP PN not "
"sequential A2=%s"
" PN=%02x%02x%02x%02x%02x%02x "
"(expected %02x%02x%02x%02x%02x%02x)\n",
rx->dev->name, print_mac(mac, hdr->addr2),
rpn[0], rpn[1], rpn[2], rpn[3], rpn[4],
rpn[5], pn[0], pn[1], pn[2], pn[3],
pn[4], pn[5]);
return TXRX_DROP;
}
memcpy(entry->last_pn, pn, CCMP_PN_LEN);
}
skb_pull(rx->skb, ieee80211_get_hdrlen(rx->fc));
__skb_queue_tail(&entry->skb_list, rx->skb);
entry->last_frag = frag;
entry->extra_len += rx->skb->len;
if (rx->fc & IEEE80211_FCTL_MOREFRAGS) {
rx->skb = NULL;
return TXRX_QUEUED;
}
rx->skb = __skb_dequeue(&entry->skb_list);
if (skb_tailroom(rx->skb) < entry->extra_len) {
I802_DEBUG_INC(rx->local->rx_expand_skb_head2);
if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len,
GFP_ATOMIC))) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
__skb_queue_purge(&entry->skb_list);
return TXRX_DROP;
}
}
while ((skb = __skb_dequeue(&entry->skb_list))) {
memcpy(skb_put(rx->skb, skb->len), skb->data, skb->len);
dev_kfree_skb(skb);
}
/* Complete frame has been reassembled - process it now */
rx->flags |= IEEE80211_TXRXD_FRAGMENTED;
out:
if (rx->sta)
rx->sta->rx_packets++;
if (is_multicast_ether_addr(hdr->addr1))
rx->local->dot11MulticastReceivedFrameCount++;
else
ieee80211_led_rx(rx->local);
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_ps_poll(struct ieee80211_txrx_data *rx)
{
struct sk_buff *skb;
int no_pending_pkts;
DECLARE_MAC_BUF(mac);
if (likely(!rx->sta ||
(rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_CTL ||
(rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PSPOLL ||
!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)))
return TXRX_CONTINUE;
skb = skb_dequeue(&rx->sta->tx_filtered);
if (!skb) {
skb = skb_dequeue(&rx->sta->ps_tx_buf);
if (skb)
rx->local->total_ps_buffered--;
}
no_pending_pkts = skb_queue_empty(&rx->sta->tx_filtered) &&
skb_queue_empty(&rx->sta->ps_tx_buf);
if (skb) {
struct ieee80211_hdr *hdr =
(struct ieee80211_hdr *) skb->data;
/* tell TX path to send one frame even though the STA may
* still remain is PS mode after this frame exchange */
rx->sta->pspoll = 1;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "STA %s aid %d: PS Poll (entries after %d)\n",
print_mac(mac, rx->sta->addr), rx->sta->aid,
skb_queue_len(&rx->sta->ps_tx_buf));
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
/* Use MoreData flag to indicate whether there are more
* buffered frames for this STA */
if (no_pending_pkts) {
hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
rx->sta->flags &= ~WLAN_STA_TIM;
} else
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
dev_queue_xmit(skb);
if (no_pending_pkts) {
if (rx->local->ops->set_tim)
rx->local->ops->set_tim(local_to_hw(rx->local),
rx->sta->aid, 0);
if (rx->sdata->bss)
bss_tim_clear(rx->local, rx->sdata->bss, rx->sta->aid);
}
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
} else if (!rx->u.rx.sent_ps_buffered) {
printk(KERN_DEBUG "%s: STA %s sent PS Poll even "
"though there is no buffered frames for it\n",
rx->dev->name, print_mac(mac, rx->sta->addr));
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
}
/* Free PS Poll skb here instead of returning TXRX_DROP that would
* count as an dropped frame. */
dev_kfree_skb(rx->skb);
return TXRX_QUEUED;
}
static ieee80211_txrx_result
ieee80211_rx_h_remove_qos_control(struct ieee80211_txrx_data *rx)
{
u16 fc = rx->fc;
u8 *data = rx->skb->data;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) data;
if (!WLAN_FC_IS_QOS_DATA(fc))
return TXRX_CONTINUE;
/* remove the qos control field, update frame type and meta-data */
memmove(data + 2, data, ieee80211_get_hdrlen(fc) - 2);
hdr = (struct ieee80211_hdr *) skb_pull(rx->skb, 2);
/* change frame type to non QOS */
rx->fc = fc &= ~IEEE80211_STYPE_QOS_DATA;
hdr->frame_control = cpu_to_le16(fc);
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_802_1x_pae(struct ieee80211_txrx_data *rx)
{
if (rx->sdata->eapol && ieee80211_is_eapol(rx->skb) &&
rx->sdata->type != IEEE80211_IF_TYPE_STA &&
(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) {
/* Pass both encrypted and unencrypted EAPOL frames to user
* space for processing. */
if (!rx->local->apdev)
return TXRX_DROP;
ieee80211_rx_mgmt(rx->local, rx->skb, rx->u.rx.status,
ieee80211_msg_normal);
return TXRX_QUEUED;
}
if (unlikely(rx->sdata->ieee802_1x &&
(rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
(rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_NULLFUNC &&
(!rx->sta || !(rx->sta->flags & WLAN_STA_AUTHORIZED)) &&
!ieee80211_is_eapol(rx->skb))) {
#ifdef CONFIG_MAC80211_DEBUG
struct ieee80211_hdr *hdr =
(struct ieee80211_hdr *) rx->skb->data;
DECLARE_MAC_BUF(mac);
printk(KERN_DEBUG "%s: dropped frame from %s"
" (unauthorized port)\n", rx->dev->name,
print_mac(mac, hdr->addr2));
#endif /* CONFIG_MAC80211_DEBUG */
return TXRX_DROP;
}
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_drop_unencrypted(struct ieee80211_txrx_data *rx)
{
/*
* Pass through unencrypted frames if the hardware has
* decrypted them already.
*/
if (rx->u.rx.status->flag & RX_FLAG_DECRYPTED)
return TXRX_CONTINUE;
/* Drop unencrypted frames if key is set. */
if (unlikely(!(rx->fc & IEEE80211_FCTL_PROTECTED) &&
(rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
(rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_NULLFUNC &&
(rx->key || rx->sdata->drop_unencrypted) &&
(rx->sdata->eapol == 0 ||
!ieee80211_is_eapol(rx->skb)))) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: RX non-WEP frame, but expected "
"encryption\n", rx->dev->name);
return TXRX_DROP;
}
return TXRX_CONTINUE;
}
static ieee80211_txrx_result
ieee80211_rx_h_data(struct ieee80211_txrx_data *rx)
{
struct net_device *dev = rx->dev;
struct ieee80211_local *local = rx->local;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
u16 fc, hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN];
struct sk_buff *skb = rx->skb, *skb2;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
DECLARE_MAC_BUF(mac);
DECLARE_MAC_BUF(mac2);
DECLARE_MAC_BUF(mac3);
DECLARE_MAC_BUF(mac4);
fc = rx->fc;
if (unlikely((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA))
return TXRX_CONTINUE;
if (unlikely(!WLAN_FC_DATA_PRESENT(fc)))
return TXRX_DROP;
hdrlen = ieee80211_get_hdrlen(fc);
/* convert IEEE 802.11 header + possible LLC headers into Ethernet
* header
* IEEE 802.11 address fields:
* ToDS FromDS Addr1 Addr2 Addr3 Addr4
* 0 0 DA SA BSSID n/a
* 0 1 DA BSSID SA n/a
* 1 0 BSSID SA DA n/a
* 1 1 RA TA DA SA
*/
switch (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
case IEEE80211_FCTL_TODS:
/* BSSID SA DA */
memcpy(dst, hdr->addr3, ETH_ALEN);
memcpy(src, hdr->addr2, ETH_ALEN);
if (unlikely(sdata->type != IEEE80211_IF_TYPE_AP &&
sdata->type != IEEE80211_IF_TYPE_VLAN)) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: dropped ToDS frame "
"(BSSID=%s SA=%s DA=%s)\n",
dev->name,
print_mac(mac, hdr->addr1),
print_mac(mac2, hdr->addr2),
print_mac(mac3, hdr->addr3));
return TXRX_DROP;
}
break;
case (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
/* RA TA DA SA */
memcpy(dst, hdr->addr3, ETH_ALEN);
memcpy(src, hdr->addr4, ETH_ALEN);
if (unlikely(sdata->type != IEEE80211_IF_TYPE_WDS)) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: dropped FromDS&ToDS "
"frame (RA=%s TA=%s DA=%s SA=%s)\n",
rx->dev->name,
print_mac(mac, hdr->addr1),
print_mac(mac2, hdr->addr2),
print_mac(mac3, hdr->addr3),
print_mac(mac4, hdr->addr4));
return TXRX_DROP;
}
break;
case IEEE80211_FCTL_FROMDS:
/* DA BSSID SA */
memcpy(dst, hdr->addr1, ETH_ALEN);
memcpy(src, hdr->addr3, ETH_ALEN);
if (sdata->type != IEEE80211_IF_TYPE_STA ||
(is_multicast_ether_addr(dst) &&
!compare_ether_addr(src, dev->dev_addr)))
return TXRX_DROP;
break;
case 0:
/* DA SA BSSID */
memcpy(dst, hdr->addr1, ETH_ALEN);
memcpy(src, hdr->addr2, ETH_ALEN);
if (sdata->type != IEEE80211_IF_TYPE_IBSS) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: dropped IBSS frame "
"(DA=%s SA=%s BSSID=%s)\n",
dev->name,
print_mac(mac, hdr->addr1),
print_mac(mac2, hdr->addr2),
print_mac(mac3, hdr->addr3));
}
return TXRX_DROP;
}
break;
}
payload = skb->data + hdrlen;
if (unlikely(skb->len - hdrlen < 8)) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: RX too short data frame "
"payload\n", dev->name);
}
return TXRX_DROP;
}
ethertype = (payload[6] << 8) | payload[7];
if (likely((compare_ether_addr(payload, rfc1042_header) == 0 &&
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
compare_ether_addr(payload, bridge_tunnel_header) == 0)) {
/* remove RFC1042 or Bridge-Tunnel encapsulation and
* replace EtherType */
skb_pull(skb, hdrlen + 6);
memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
} else {
struct ethhdr *ehdr;
__be16 len;
skb_pull(skb, hdrlen);
len = htons(skb->len);
ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
memcpy(ehdr->h_dest, dst, ETH_ALEN);
memcpy(ehdr->h_source, src, ETH_ALEN);
ehdr->h_proto = len;
}
skb->dev = dev;
skb2 = NULL;
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
if (local->bridge_packets && (sdata->type == IEEE80211_IF_TYPE_AP
|| sdata->type == IEEE80211_IF_TYPE_VLAN) &&
(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) {
if (is_multicast_ether_addr(skb->data)) {
/* send multicast frames both to higher layers in
* local net stack and back to the wireless media */
skb2 = skb_copy(skb, GFP_ATOMIC);
if (!skb2 && net_ratelimit())
printk(KERN_DEBUG "%s: failed to clone "
"multicast frame\n", dev->name);
} else {
struct sta_info *dsta;
dsta = sta_info_get(local, skb->data);
if (dsta && !dsta->dev) {
if (net_ratelimit())
printk(KERN_DEBUG "Station with null "
"dev structure!\n");
} else if (dsta && dsta->dev == dev) {
/* Destination station is associated to this
* AP, so send the frame directly to it and
* do not pass the frame to local net stack.
*/
skb2 = skb;
skb = NULL;
}
if (dsta)
sta_info_put(dsta);
}
}
if (skb) {
/* deliver to local stack */
skb->protocol = eth_type_trans(skb, dev);
memset(skb->cb, 0, sizeof(skb->cb));
netif_rx(skb);
}
if (skb2) {
/* send to wireless media */
skb2->protocol = __constant_htons(ETH_P_802_3);
skb_set_network_header(skb2, 0);
skb_set_mac_header(skb2, 0);
dev_queue_xmit(skb2);
}
return TXRX_QUEUED;
}
static ieee80211_txrx_result
ieee80211_rx_h_mgmt(struct ieee80211_txrx_data *rx)
{
struct ieee80211_sub_if_data *sdata;
if (!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH))
return TXRX_DROP;
sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
if ((sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) &&
!rx->local->user_space_mlme) {
ieee80211_sta_rx_mgmt(rx->dev, rx->skb, rx->u.rx.status);
} else {
/* Management frames are sent to hostapd for processing */
if (!rx->local->apdev)
return TXRX_DROP;
ieee80211_rx_mgmt(rx->local, rx->skb, rx->u.rx.status,
ieee80211_msg_normal);
}
return TXRX_QUEUED;
}
static inline ieee80211_txrx_result __ieee80211_invoke_rx_handlers(
struct ieee80211_local *local,
ieee80211_rx_handler *handlers,
struct ieee80211_txrx_data *rx,
struct sta_info *sta)
{
ieee80211_rx_handler *handler;
ieee80211_txrx_result res = TXRX_DROP;
for (handler = handlers; *handler != NULL; handler++) {
res = (*handler)(rx);
switch (res) {
case TXRX_CONTINUE:
continue;
case TXRX_DROP:
I802_DEBUG_INC(local->rx_handlers_drop);
if (sta)
sta->rx_dropped++;
break;
case TXRX_QUEUED:
I802_DEBUG_INC(local->rx_handlers_queued);
break;
}
break;
}
if (res == TXRX_DROP)
dev_kfree_skb(rx->skb);
return res;
}
static inline void ieee80211_invoke_rx_handlers(struct ieee80211_local *local,
ieee80211_rx_handler *handlers,
struct ieee80211_txrx_data *rx,
struct sta_info *sta)
{
if (__ieee80211_invoke_rx_handlers(local, handlers, rx, sta) ==
TXRX_CONTINUE)
dev_kfree_skb(rx->skb);
}
static void ieee80211_rx_michael_mic_report(struct net_device *dev,
struct ieee80211_hdr *hdr,
struct sta_info *sta,
struct ieee80211_txrx_data *rx)
{
int keyidx, hdrlen;
DECLARE_MAC_BUF(mac);
DECLARE_MAC_BUF(mac2);
hdrlen = ieee80211_get_hdrlen_from_skb(rx->skb);
if (rx->skb->len >= hdrlen + 4)
keyidx = rx->skb->data[hdrlen + 3] >> 6;
else
keyidx = -1;
if (net_ratelimit())
printk(KERN_DEBUG "%s: TKIP hwaccel reported Michael MIC "
"failure from %s to %s keyidx=%d\n",
dev->name, print_mac(mac, hdr->addr2),
print_mac(mac2, hdr->addr1), keyidx);
if (!sta) {
/*
* Some hardware seem to generate incorrect Michael MIC
* reports; ignore them to avoid triggering countermeasures.
*/
if (net_ratelimit())
printk(KERN_DEBUG "%s: ignored spurious Michael MIC "
"error for unknown address %s\n",
dev->name, print_mac(mac, hdr->addr2));
goto ignore;
}
if (!(rx->fc & IEEE80211_FCTL_PROTECTED)) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: ignored spurious Michael MIC "
"error for a frame with no PROTECTED flag (src "
"%s)\n", dev->name, print_mac(mac, hdr->addr2));
goto ignore;
}
if (rx->sdata->type == IEEE80211_IF_TYPE_AP && keyidx) {
/*
* APs with pairwise keys should never receive Michael MIC
* errors for non-zero keyidx because these are reserved for
* group keys and only the AP is sending real multicast
* frames in the BSS.
*/
if (net_ratelimit())
printk(KERN_DEBUG "%s: ignored Michael MIC error for "
"a frame with non-zero keyidx (%d)"
" (src %s)\n", dev->name, keyidx,
print_mac(mac, hdr->addr2));
goto ignore;
}
if ((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA &&
((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT ||
(rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_AUTH)) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: ignored spurious Michael MIC "
"error for a frame that cannot be encrypted "
"(fc=0x%04x) (src %s)\n",
dev->name, rx->fc, print_mac(mac, hdr->addr2));
goto ignore;
}
mac80211_ev_michael_mic_failure(rx->dev, keyidx, hdr);
ignore:
dev_kfree_skb(rx->skb);
rx->skb = NULL;
}
ieee80211_rx_handler ieee80211_rx_handlers[] =
{
ieee80211_rx_h_if_stats,
ieee80211_rx_h_monitor,
ieee80211_rx_h_passive_scan,
ieee80211_rx_h_check,
ieee80211_rx_h_load_key,
ieee80211_rx_h_sta_process,
ieee80211_rx_h_ccmp_decrypt,
ieee80211_rx_h_tkip_decrypt,
ieee80211_rx_h_wep_weak_iv_detection,
ieee80211_rx_h_wep_decrypt,
ieee80211_rx_h_defragment,
ieee80211_rx_h_ps_poll,
ieee80211_rx_h_michael_mic_verify,
/* this must be after decryption - so header is counted in MPDU mic
* must be before pae and data, so QOS_DATA format frames
* are not passed to user space by these functions
*/
ieee80211_rx_h_remove_qos_control,
ieee80211_rx_h_802_1x_pae,
ieee80211_rx_h_drop_unencrypted,
ieee80211_rx_h_data,
ieee80211_rx_h_mgmt,
NULL
};
/* main receive path */
static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata,
u8 *bssid, struct ieee80211_txrx_data *rx,
struct ieee80211_hdr *hdr)
{
int multicast = is_multicast_ether_addr(hdr->addr1);
switch (sdata->type) {
case IEEE80211_IF_TYPE_STA:
if (!bssid)
return 0;
if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) {
if (!(rx->flags & IEEE80211_TXRXD_RXIN_SCAN))
return 0;
rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH;
} else if (!multicast &&
compare_ether_addr(sdata->dev->dev_addr,
hdr->addr1) != 0) {
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
if (!(sdata->dev->flags & IFF_PROMISC))
return 0;
rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH;
}
break;
case IEEE80211_IF_TYPE_IBSS:
if (!bssid)
return 0;
if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) {
if (!(rx->flags & IEEE80211_TXRXD_RXIN_SCAN))
return 0;
rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH;
} else if (!multicast &&
compare_ether_addr(sdata->dev->dev_addr,
hdr->addr1) != 0) {
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
if (!(sdata->dev->flags & IFF_PROMISC))
return 0;
rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH;
} else if (!rx->sta)
rx->sta = ieee80211_ibss_add_sta(sdata->dev, rx->skb,
bssid, hdr->addr2);
break;
case IEEE80211_IF_TYPE_AP:
if (!bssid) {
if (compare_ether_addr(sdata->dev->dev_addr,
hdr->addr1))
return 0;
} else if (!ieee80211_bssid_match(bssid,
sdata->dev->dev_addr)) {
if (!(rx->flags & IEEE80211_TXRXD_RXIN_SCAN))
return 0;
rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH;
}
if (sdata->dev == sdata->local->mdev &&
!(rx->flags & IEEE80211_TXRXD_RXIN_SCAN))
/* do not receive anything via
* master device when not scanning */
return 0;
break;
case IEEE80211_IF_TYPE_WDS:
if (bssid ||
(rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA)
return 0;
if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
return 0;
break;
}
return 1;
}
/*
* This is the receive path handler. It is called by a low level driver when an
* 802.11 MPDU is received from the hardware.
*/
void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_rx_status *status)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
struct ieee80211_hdr *hdr;
struct ieee80211_txrx_data rx;
u16 type;
int radiotap_len = 0, prepres;
struct ieee80211_sub_if_data *prev = NULL;
struct sk_buff *skb_new;
u8 *bssid;
int bogon;
if (status->flag & RX_FLAG_RADIOTAP) {
radiotap_len = ieee80211_get_radiotap_len(skb->data);
skb_pull(skb, radiotap_len);
}
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
/*
* key references and virtual interfaces are protected using RCU
* and this requires that we are in a read-side RCU section during
* receive processing
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
*/
rcu_read_lock();
hdr = (struct ieee80211_hdr *) skb->data;
memset(&rx, 0, sizeof(rx));
rx.skb = skb;
rx.local = local;
rx.u.rx.status = status;
rx.fc = skb->len >= 2 ? le16_to_cpu(hdr->frame_control) : 0;
type = rx.fc & IEEE80211_FCTL_FTYPE;
bogon = status->flag & (RX_FLAG_FAILED_FCS_CRC |
RX_FLAG_FAILED_PLCP_CRC);
if (!bogon && (type == IEEE80211_FTYPE_DATA ||
type == IEEE80211_FTYPE_MGMT))
local->dot11ReceivedFragmentCount++;
if (!bogon && skb->len >= 16) {
sta = rx.sta = sta_info_get(local, hdr->addr2);
if (sta) {
rx.dev = rx.sta->dev;
rx.sdata = IEEE80211_DEV_TO_SUB_IF(rx.dev);
}
} else
sta = rx.sta = NULL;
if ((status->flag & RX_FLAG_MMIC_ERROR)) {
ieee80211_rx_michael_mic_report(local->mdev, hdr, sta, &rx);
goto end;
}
if (unlikely(local->sta_scanning))
rx.flags |= IEEE80211_TXRXD_RXIN_SCAN;
if (__ieee80211_invoke_rx_handlers(local, local->rx_pre_handlers, &rx,
sta) != TXRX_CONTINUE)
goto end;
skb = rx.skb;
skb_push(skb, radiotap_len);
if (sta && !(sta->flags & (WLAN_STA_WDS | WLAN_STA_ASSOC_AP)) &&
!local->iff_promiscs && !is_multicast_ether_addr(hdr->addr1)) {
rx.flags |= IEEE80211_TXRXD_RXRA_MATCH;
ieee80211_invoke_rx_handlers(local, local->rx_handlers, &rx,
rx.sta);
sta_info_put(sta);
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
rcu_read_unlock();
return;
}
bssid = ieee80211_get_bssid(hdr, skb->len - radiotap_len);
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
rx.flags |= IEEE80211_TXRXD_RXRA_MATCH;
if (!netif_running(sdata->dev))
continue;
prepres = prepare_for_handlers(sdata, bssid, &rx, hdr);
/* prepare_for_handlers can change sta */
sta = rx.sta;
if (!prepres)
continue;
/*
* frame is destined for this interface, but if it's not
* also for the previous one we handle that after the
* loop to avoid copying the SKB once too much
*/
if (!prev) {
prev = sdata;
continue;
}
/*
* frame was destined for the previous interface
* so invoke RX handlers for it
*/
skb_new = skb_copy(skb, GFP_ATOMIC);
if (!skb_new) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: failed to copy "
"multicast frame for %s",
wiphy_name(local->hw.wiphy),
prev->dev->name);
continue;
}
rx.skb = skb_new;
rx.dev = prev->dev;
rx.sdata = prev;
ieee80211_invoke_rx_handlers(local, local->rx_handlers,
&rx, sta);
prev = sdata;
}
if (prev) {
rx.skb = skb;
rx.dev = prev->dev;
rx.sdata = prev;
ieee80211_invoke_rx_handlers(local, local->rx_handlers,
&rx, sta);
} else
dev_kfree_skb(skb);
end:
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 23:10:24 +08:00
rcu_read_unlock();
if (sta)
sta_info_put(sta);
}
EXPORT_SYMBOL(__ieee80211_rx);
/* This is a version of the rx handler that can be called from hard irq
* context. Post the skb on the queue and schedule the tasklet */
void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_rx_status *status)
{
struct ieee80211_local *local = hw_to_local(hw);
BUILD_BUG_ON(sizeof(struct ieee80211_rx_status) > sizeof(skb->cb));
skb->dev = local->mdev;
/* copy status into skb->cb for use by tasklet */
memcpy(skb->cb, status, sizeof(*status));
skb->pkt_type = IEEE80211_RX_MSG;
skb_queue_tail(&local->skb_queue, skb);
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_rx_irqsafe);