OpenCloudOS-Kernel/arch/mips/kernel/setup.c

814 lines
19 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995 Linus Torvalds
* Copyright (C) 1995 Waldorf Electronics
* Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 Ralf Baechle
* Copyright (C) 1996 Stoned Elipot
* Copyright (C) 1999 Silicon Graphics, Inc.
* Copyright (C) 2000, 2001, 2002, 2007 Maciej W. Rozycki
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/export.h>
#include <linux/screen_info.h>
#include <linux/memblock.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <linux/root_dev.h>
#include <linux/highmem.h>
#include <linux/console.h>
#include <linux/pfn.h>
#include <linux/debugfs.h>
#include <linux/kexec.h>
#include <linux/sizes.h>
#include <linux/device.h>
#include <linux/dma-contiguous.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
[MIPS] R4000/R4400 errata workarounds This is the gereric part of R4000/R4400 errata workarounds. They include compiler and assembler support as well as some source code modifications to address the problems with some combinations of multiply/divide+shift instructions as well as the daddi and daddiu instructions. Changes included are as follows: 1. New Kconfig options to select workarounds by platforms as necessary. 2. Arch top-level Makefile to pass necessary options to the compiler; also incompatible configurations are detected (-mno-sym32 unsupported as horribly intrusive for little gain). 3. Bug detection updated and shuffled -- the multiply/divide+shift problem is lethal enough that if not worked around it makes the kernel crash in time_init() because of a division by zero; the daddiu erratum might also trigger early potentially, though I have not observed it. On the other hand the daddi detection code requires the exception subsystem to have been initialised (and is there mainly for information). 4. r4k_daddiu_bug() added so that the existence of the erratum can be queried by code at the run time as necessary; useful for generated code like TLB fault and copy/clear page handlers. 5. __udelay() updated as it uses multiplication in inline assembly. Note that -mdaddi requires modified toolchain (which has been maintained by myself and available from my site for ~4years now -- versions covered are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards). The -mfix-r4000 and -mfix-r4400 have been standard for a while though. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:11 +08:00
#include <asm/bugs.h>
#include <asm/cache.h>
#include <asm/cdmm.h>
#include <asm/cpu.h>
#include <asm/debug.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/smp-ops.h>
#include <asm/prom.h>
struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(cpu_data);
#ifdef CONFIG_VT
struct screen_info screen_info;
#endif
/*
* Despite it's name this variable is even if we don't have PCI
*/
unsigned int PCI_DMA_BUS_IS_PHYS;
EXPORT_SYMBOL(PCI_DMA_BUS_IS_PHYS);
/*
* Setup information
*
* These are initialized so they are in the .data section
*/
unsigned long mips_machtype __read_mostly = MACH_UNKNOWN;
EXPORT_SYMBOL(mips_machtype);
struct boot_mem_map boot_mem_map;
static char __initdata command_line[COMMAND_LINE_SIZE];
char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
#ifdef CONFIG_CMDLINE_BOOL
static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
#endif
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
*/
const unsigned long mips_io_port_base = -1;
EXPORT_SYMBOL(mips_io_port_base);
static struct resource code_resource = { .name = "Kernel code", };
static struct resource data_resource = { .name = "Kernel data", };
static void *detect_magic __initdata = detect_memory_region;
void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type)
{
int x = boot_mem_map.nr_map;
int i;
/* Sanity check */
if (start + size < start) {
pr_warn("Trying to add an invalid memory region, skipped\n");
return;
}
/*
* Try to merge with existing entry, if any.
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
struct boot_mem_map_entry *entry = boot_mem_map.map + i;
unsigned long top;
if (entry->type != type)
continue;
if (start + size < entry->addr)
continue; /* no overlap */
if (entry->addr + entry->size < start)
continue; /* no overlap */
top = max(entry->addr + entry->size, start + size);
entry->addr = min(entry->addr, start);
entry->size = top - entry->addr;
return;
}
if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
pr_err("Ooops! Too many entries in the memory map!\n");
return;
}
boot_mem_map.map[x].addr = start;
boot_mem_map.map[x].size = size;
boot_mem_map.map[x].type = type;
boot_mem_map.nr_map++;
}
void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max)
{
void *dm = &detect_magic;
phys_addr_t size;
for (size = sz_min; size < sz_max; size <<= 1) {
if (!memcmp(dm, dm + size, sizeof(detect_magic)))
break;
}
pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n",
((unsigned long long) size) / SZ_1M,
(unsigned long long) start,
((unsigned long long) sz_min) / SZ_1M,
((unsigned long long) sz_max) / SZ_1M);
add_memory_region(start, size, BOOT_MEM_RAM);
}
static void __init print_memory_map(void)
{
int i;
const int field = 2 * sizeof(unsigned long);
for (i = 0; i < boot_mem_map.nr_map; i++) {
printk(KERN_INFO " memory: %0*Lx @ %0*Lx ",
field, (unsigned long long) boot_mem_map.map[i].size,
field, (unsigned long long) boot_mem_map.map[i].addr);
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
printk(KERN_CONT "(usable)\n");
break;
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
case BOOT_MEM_INIT_RAM:
printk(KERN_CONT "(usable after init)\n");
break;
case BOOT_MEM_ROM_DATA:
printk(KERN_CONT "(ROM data)\n");
break;
case BOOT_MEM_RESERVED:
printk(KERN_CONT "(reserved)\n");
break;
default:
printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type);
break;
}
}
}
/*
* Manage initrd
*/
#ifdef CONFIG_BLK_DEV_INITRD
static int __init rd_start_early(char *p)
{
unsigned long start = memparse(p, &p);
#ifdef CONFIG_64BIT
/* Guess if the sign extension was forgotten by bootloader */
if (start < XKPHYS)
start = (int)start;
#endif
initrd_start = start;
initrd_end += start;
return 0;
}
early_param("rd_start", rd_start_early);
static int __init rd_size_early(char *p)
{
initrd_end += memparse(p, &p);
return 0;
}
early_param("rd_size", rd_size_early);
/* it returns the next free pfn after initrd */
static unsigned long __init init_initrd(void)
{
unsigned long end;
/*
* Board specific code or command line parser should have
* already set up initrd_start and initrd_end. In these cases
* perfom sanity checks and use them if all looks good.
*/
if (!initrd_start || initrd_end <= initrd_start)
goto disable;
if (initrd_start & ~PAGE_MASK) {
pr_err("initrd start must be page aligned\n");
goto disable;
}
if (initrd_start < PAGE_OFFSET) {
pr_err("initrd start < PAGE_OFFSET\n");
goto disable;
}
/*
* Sanitize initrd addresses. For example firmware
* can't guess if they need to pass them through
* 64-bits values if the kernel has been built in pure
* 32-bit. We need also to switch from KSEG0 to XKPHYS
* addresses now, so the code can now safely use __pa().
*/
end = __pa(initrd_end);
initrd_end = (unsigned long)__va(end);
initrd_start = (unsigned long)__va(__pa(initrd_start));
ROOT_DEV = Root_RAM0;
return PFN_UP(end);
disable:
initrd_start = 0;
initrd_end = 0;
return 0;
}
static void __init finalize_initrd(void)
{
unsigned long size = initrd_end - initrd_start;
if (size == 0) {
printk(KERN_INFO "Initrd not found or empty");
goto disable;
}
if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
printk(KERN_ERR "Initrd extends beyond end of memory");
goto disable;
}
reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
initrd_below_start_ok = 1;
pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
initrd_start, size);
return;
disable:
printk(KERN_CONT " - disabling initrd\n");
initrd_start = 0;
initrd_end = 0;
}
#else /* !CONFIG_BLK_DEV_INITRD */
static unsigned long __init init_initrd(void)
{
return 0;
}
#define finalize_initrd() do {} while (0)
#endif
/*
* Initialize the bootmem allocator. It also setup initrd related data
* if needed.
*/
#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA))
static void __init bootmem_init(void)
{
init_initrd();
finalize_initrd();
}
#else /* !CONFIG_SGI_IP27 */
static void __init bootmem_init(void)
{
unsigned long reserved_end;
unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
int i;
/*
* Sanity check any INITRD first. We don't take it into account
* for bootmem setup initially, rely on the end-of-kernel-code
* as our memory range starting point. Once bootmem is inited we
* will reserve the area used for the initrd.
*/
init_initrd();
reserved_end = (unsigned long) PFN_UP(__pa_symbol(&_end));
/*
* max_low_pfn is not a number of pages. The number of pages
* of the system is given by 'max_low_pfn - min_low_pfn'.
*/
min_low_pfn = ~0UL;
max_low_pfn = 0;
/*
* Find the highest page frame number we have available.
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
continue;
start = PFN_UP(boot_mem_map.map[i].addr);
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
if (end > max_low_pfn)
max_low_pfn = end;
if (start < min_low_pfn)
min_low_pfn = start;
if (end <= reserved_end)
continue;
MIPS: bootmem: Don't use memory holes for page bitmap Commit f9a7febd leads to a fact that mapstart and therefore a page bitmap for bootmem allocator immediately follows initrd_end. This doesn't always work well on Octeon, where there are holes in PFN ranges (refer to 5b3b1688 and 4MB-aligned PFN allocation). Depending on the inird location it could happen, that mapstart would be in an area not allocated by plat_mem_setup() in arch/mips/cavium-octeon/setup.c, but in the alignment hole between initrd and the next PFN area. Later on this memory will be unconditionally made available to buddy allocator at the end of free_all_bootmem_core() (mm/bootmem.c). All of this results in Linux using the memory not designated for Linux in Octeon's plat_mem_setup(), which in turn means corruption of the memory used by another OS/baremetal code on the same SoC. It doesn't look to me as a problem of Octeon platform code, but rather as an inability of f9a7febd to deal correctly with the fragmented memory-mappings. Proposed fix moves the check for initrd address to the same calculation-loop in bootmem_init() (arch/mips/kernel/setup.c), which also accounts for kernel code location. This should result in mapstart located starting from the first PFN area after kernel code AND initrd. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: Joe Perches <joe@perches.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Yusuf Khan <yusuf.khan@nokia.com> Cc: Michael Kreuzer <michael.kreuzer@nokia.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/10594/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-02 23:16:01 +08:00
#ifdef CONFIG_BLK_DEV_INITRD
/* Skip zones before initrd and initrd itself */
MIPS: bootmem: Don't use memory holes for page bitmap Commit f9a7febd leads to a fact that mapstart and therefore a page bitmap for bootmem allocator immediately follows initrd_end. This doesn't always work well on Octeon, where there are holes in PFN ranges (refer to 5b3b1688 and 4MB-aligned PFN allocation). Depending on the inird location it could happen, that mapstart would be in an area not allocated by plat_mem_setup() in arch/mips/cavium-octeon/setup.c, but in the alignment hole between initrd and the next PFN area. Later on this memory will be unconditionally made available to buddy allocator at the end of free_all_bootmem_core() (mm/bootmem.c). All of this results in Linux using the memory not designated for Linux in Octeon's plat_mem_setup(), which in turn means corruption of the memory used by another OS/baremetal code on the same SoC. It doesn't look to me as a problem of Octeon platform code, but rather as an inability of f9a7febd to deal correctly with the fragmented memory-mappings. Proposed fix moves the check for initrd address to the same calculation-loop in bootmem_init() (arch/mips/kernel/setup.c), which also accounts for kernel code location. This should result in mapstart located starting from the first PFN area after kernel code AND initrd. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: Joe Perches <joe@perches.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Yusuf Khan <yusuf.khan@nokia.com> Cc: Michael Kreuzer <michael.kreuzer@nokia.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/10594/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-02 23:16:01 +08:00
if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
continue;
#endif
if (start >= mapstart)
continue;
mapstart = max(reserved_end, start);
}
if (min_low_pfn >= max_low_pfn)
panic("Incorrect memory mapping !!!");
if (min_low_pfn > ARCH_PFN_OFFSET) {
pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
min_low_pfn - ARCH_PFN_OFFSET);
} else if (min_low_pfn < ARCH_PFN_OFFSET) {
pr_info("%lu free pages won't be used\n",
ARCH_PFN_OFFSET - min_low_pfn);
}
min_low_pfn = ARCH_PFN_OFFSET;
/*
* Determine low and high memory ranges
*/
max_pfn = max_low_pfn;
if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
highstart_pfn = PFN_DOWN(HIGHMEM_START);
highend_pfn = max_low_pfn;
#endif
max_low_pfn = PFN_DOWN(HIGHMEM_START);
}
#ifdef CONFIG_BLK_DEV_INITRD
/*
* mapstart should be after initrd_end
*/
if (initrd_end)
mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
#endif
/*
* Initialize the boot-time allocator with low memory only.
*/
bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart,
min_low_pfn, max_low_pfn);
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
start = PFN_UP(boot_mem_map.map[i].addr);
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
if (start <= min_low_pfn)
start = min_low_pfn;
if (start >= end)
continue;
#ifndef CONFIG_HIGHMEM
if (end > max_low_pfn)
end = max_low_pfn;
/*
* ... finally, is the area going away?
*/
if (end <= start)
continue;
#endif
memblock_add_node(PFN_PHYS(start), PFN_PHYS(end - start), 0);
}
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end, size;
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
start = PFN_UP(boot_mem_map.map[i].addr);
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
/*
* Reserve usable memory.
*/
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
break;
case BOOT_MEM_INIT_RAM:
memory_present(0, start, end);
continue;
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
default:
/* Not usable memory */
continue;
}
/*
* We are rounding up the start address of usable memory
* and at the end of the usable range downwards.
*/
if (start >= max_low_pfn)
continue;
if (start < reserved_end)
start = reserved_end;
if (end > max_low_pfn)
end = max_low_pfn;
/*
* ... finally, is the area going away?
*/
if (end <= start)
continue;
size = end - start;
/* Register lowmem ranges */
free_bootmem(PFN_PHYS(start), size << PAGE_SHIFT);
memory_present(0, start, end);
}
/*
* Reserve the bootmap memory.
*/
reserve_bootmem(PFN_PHYS(mapstart), bootmap_size, BOOTMEM_DEFAULT);
/*
* Reserve initrd memory if needed.
*/
finalize_initrd();
}
#endif /* CONFIG_SGI_IP27 */
/*
* arch_mem_init - initialize memory management subsystem
*
* o plat_mem_setup() detects the memory configuration and will record detected
* memory areas using add_memory_region.
*
* At this stage the memory configuration of the system is known to the
* kernel but generic memory management system is still entirely uninitialized.
*
* o bootmem_init()
* o sparse_init()
* o paging_init()
* o dma_contiguous_reserve()
*
* At this stage the bootmem allocator is ready to use.
*
* NOTE: historically plat_mem_setup did the entire platform initialization.
* This was rather impractical because it meant plat_mem_setup had to
* get away without any kind of memory allocator. To keep old code from
* breaking plat_setup was just renamed to plat_mem_setup and a second platform
* initialization hook for anything else was introduced.
*/
static int usermem __initdata;
static int __init early_parse_mem(char *p)
{
phys_addr_t start, size;
/*
* If a user specifies memory size, we
* blow away any automatically generated
* size.
*/
if (usermem == 0) {
boot_mem_map.nr_map = 0;
usermem = 1;
}
start = 0;
size = memparse(p, &p);
if (*p == '@')
start = memparse(p + 1, &p);
add_memory_region(start, size, BOOT_MEM_RAM);
return 0;
}
early_param("mem", early_parse_mem);
#ifdef CONFIG_PROC_VMCORE
unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
static int __init early_parse_elfcorehdr(char *p)
{
int i;
setup_elfcorehdr = memparse(p, &p);
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start = boot_mem_map.map[i].addr;
unsigned long end = (boot_mem_map.map[i].addr +
boot_mem_map.map[i].size);
if (setup_elfcorehdr >= start && setup_elfcorehdr < end) {
/*
* Reserve from the elf core header to the end of
* the memory segment, that should all be kdump
* reserved memory.
*/
setup_elfcorehdr_size = end - setup_elfcorehdr;
break;
}
}
/*
* If we don't find it in the memory map, then we shouldn't
* have to worry about it, as the new kernel won't use it.
*/
return 0;
}
early_param("elfcorehdr", early_parse_elfcorehdr);
#endif
static void __init arch_mem_addpart(phys_addr_t mem, phys_addr_t end, int type)
{
phys_addr_t size;
int i;
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
size = end - mem;
if (!size)
return;
/* Make sure it is in the boot_mem_map */
for (i = 0; i < boot_mem_map.nr_map; i++) {
if (mem >= boot_mem_map.map[i].addr &&
mem < (boot_mem_map.map[i].addr +
boot_mem_map.map[i].size))
return;
}
add_memory_region(mem, size, type);
}
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
#ifdef CONFIG_KEXEC
static inline unsigned long long get_total_mem(void)
{
unsigned long long total;
total = max_pfn - min_low_pfn;
return total << PAGE_SHIFT;
}
static void __init mips_parse_crashkernel(void)
{
unsigned long long total_mem;
unsigned long long crash_size, crash_base;
int ret;
total_mem = get_total_mem();
ret = parse_crashkernel(boot_command_line, total_mem,
&crash_size, &crash_base);
if (ret != 0 || crash_size <= 0)
return;
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
}
static void __init request_crashkernel(struct resource *res)
{
int ret;
ret = request_resource(res, &crashk_res);
if (!ret)
pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
(unsigned long)((crashk_res.end -
crashk_res.start + 1) >> 20),
(unsigned long)(crashk_res.start >> 20));
}
#else /* !defined(CONFIG_KEXEC) */
static void __init mips_parse_crashkernel(void)
{
}
static void __init request_crashkernel(struct resource *res)
{
}
#endif /* !defined(CONFIG_KEXEC) */
static void __init arch_mem_init(char **cmdline_p)
{
struct memblock_region *reg;
extern void plat_mem_setup(void);
/* call board setup routine */
plat_mem_setup();
/*
* Make sure all kernel memory is in the maps. The "UP" and
* "DOWN" are opposite for initdata since if it crosses over
* into another memory section you don't want that to be
* freed when the initdata is freed.
*/
arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
BOOT_MEM_RAM);
arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
BOOT_MEM_INIT_RAM);
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
pr_info("Determined physical RAM map:\n");
print_memory_map();
#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_CMDLINE_OVERRIDE
strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else
if (builtin_cmdline[0]) {
strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
}
strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
#else
strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
parse_early_param();
if (usermem) {
pr_info("User-defined physical RAM map:\n");
print_memory_map();
}
bootmem_init();
#ifdef CONFIG_PROC_VMCORE
if (setup_elfcorehdr && setup_elfcorehdr_size) {
printk(KERN_INFO "kdump reserved memory at %lx-%lx\n",
setup_elfcorehdr, setup_elfcorehdr_size);
reserve_bootmem(setup_elfcorehdr, setup_elfcorehdr_size,
BOOTMEM_DEFAULT);
}
#endif
mips_parse_crashkernel();
#ifdef CONFIG_KEXEC
if (crashk_res.start != crashk_res.end)
reserve_bootmem(crashk_res.start,
crashk_res.end - crashk_res.start + 1,
BOOTMEM_DEFAULT);
#endif
device_tree_init();
sparse_init();
plat_swiotlb_setup();
paging_init();
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
/* Tell bootmem about cma reserved memblock section */
for_each_memblock(reserved, reg)
if (reg->size != 0)
reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
}
static void __init resource_init(void)
{
int i;
if (UNCAC_BASE != IO_BASE)
return;
code_resource.start = __pa_symbol(&_text);
code_resource.end = __pa_symbol(&_etext) - 1;
data_resource.start = __pa_symbol(&_etext);
data_resource.end = __pa_symbol(&_edata) - 1;
for (i = 0; i < boot_mem_map.nr_map; i++) {
struct resource *res;
unsigned long start, end;
start = boot_mem_map.map[i].addr;
end = boot_mem_map.map[i].addr + boot_mem_map.map[i].size - 1;
if (start >= HIGHMEM_START)
continue;
if (end >= HIGHMEM_START)
end = HIGHMEM_START - 1;
res = alloc_bootmem(sizeof(struct resource));
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
MIPS: Handle initmem in systems with kernel not in add_memory_region() mem This patch addresses a couple of related problems: 1) The kernel may reside in physical memory outside of the ranges set by plat_mem_setup(). If this is the case, init mem cannot be reused as it resides outside of the range of pages that the kernel memory allocators control. 2) initrd images might be loaded in physical memory outside of the ranges set by plat_mem_setup(). The memory likewise cannot be reused. The patch doesn't handle this specific case, but the infrastructure is useful for future patches that do. The crux of the problem is that there are memory regions that need be memory_present(), but that cannot be free_bootmem() at the time of arch_mem_init(). We create a new type of memory (BOOT_MEM_INIT_RAM) for use with add_memory_region(). Then arch_mem_init() adds the init mem with this type if the init mem is not already covered by existing ranges. When memory is being freed into the bootmem allocator, we skip the BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal them as memory_present(). This way when they are later freed, the necessary memory manager structures have initialized and the Sparse allocater is prevented from crashing. The Octeon specific code that handled this case is removed, because the new general purpose code handles the case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-22 22:38:03 +08:00
case BOOT_MEM_INIT_RAM:
case BOOT_MEM_ROM_DATA:
res->name = "System RAM";
break;
case BOOT_MEM_RESERVED:
default:
res->name = "reserved";
}
res->start = start;
res->end = end;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
request_resource(&iomem_resource, res);
/*
* We don't know which RAM region contains kernel data,
* so we try it repeatedly and let the resource manager
* test it.
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
request_crashkernel(res);
}
}
#ifdef CONFIG_SMP
static void __init prefill_possible_map(void)
{
int i, possible = num_possible_cpus();
if (possible > nr_cpu_ids)
possible = nr_cpu_ids;
for (i = 0; i < possible; i++)
set_cpu_possible(i, true);
for (; i < NR_CPUS; i++)
set_cpu_possible(i, false);
nr_cpu_ids = possible;
}
#else
static inline void prefill_possible_map(void) {}
#endif
void __init setup_arch(char **cmdline_p)
{
cpu_probe();
prom_init();
setup_early_fdc_console();
#ifdef CONFIG_EARLY_PRINTK
setup_early_printk();
#endif
cpu_report();
[MIPS] R4000/R4400 errata workarounds This is the gereric part of R4000/R4400 errata workarounds. They include compiler and assembler support as well as some source code modifications to address the problems with some combinations of multiply/divide+shift instructions as well as the daddi and daddiu instructions. Changes included are as follows: 1. New Kconfig options to select workarounds by platforms as necessary. 2. Arch top-level Makefile to pass necessary options to the compiler; also incompatible configurations are detected (-mno-sym32 unsupported as horribly intrusive for little gain). 3. Bug detection updated and shuffled -- the multiply/divide+shift problem is lethal enough that if not worked around it makes the kernel crash in time_init() because of a division by zero; the daddiu erratum might also trigger early potentially, though I have not observed it. On the other hand the daddi detection code requires the exception subsystem to have been initialised (and is there mainly for information). 4. r4k_daddiu_bug() added so that the existence of the erratum can be queried by code at the run time as necessary; useful for generated code like TLB fault and copy/clear page handlers. 5. __udelay() updated as it uses multiplication in inline assembly. Note that -mdaddi requires modified toolchain (which has been maintained by myself and available from my site for ~4years now -- versions covered are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards). The -mfix-r4000 and -mfix-r4400 have been standard for a while though. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:11 +08:00
check_bugs_early();
#if defined(CONFIG_VT)
#if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
arch_mem_init(cmdline_p);
resource_init();
plat_smp_setup();
prefill_possible_map();
cpu_cache_init();
}
unsigned long kernelsp[NR_CPUS];
unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
#ifdef CONFIG_DEBUG_FS
struct dentry *mips_debugfs_dir;
static int __init debugfs_mips(void)
{
struct dentry *d;
d = debugfs_create_dir("mips", NULL);
if (!d)
return -ENOMEM;
mips_debugfs_dir = d;
return 0;
}
arch_initcall(debugfs_mips);
#endif