UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/s390/kernel/s390_ksyms.c

16 lines
323 B
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/module.h>
[S390] move sie code to entry.S The entry to / exit from sie has subtle dependencies to the first level interrupt handler. Move the sie assembler code to entry64.S and replace the SIE_HOOK callback with a test and the new _TIF_SIE bit. In addition this patch fixes several problems in regard to the check for the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing the interrupt handler and it only modified the instruction address if it pointed directly to the sie instruction. In both cases it could miss a TIF bit that normally would cause an exit from the guest and would reenter the guest context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 16:48:18 +08:00
#include <linux/kvm_host.h>
s390/fpu: split fpu-internal.h into fpu internals, api, and type headers Split the API and FPU type definitions into separate header files similar to "x86/fpu: Rename fpu-internal.h to fpu/internal.h" (78f7f1e54b). The new header files and their meaning are: asm/fpu/types.h: FPU related data types, needed for 'struct thread_struct' and 'struct task_struct'. asm/fpu/api.h: FPU related 'public' functions for other subsystems and device drivers. asm/fpu/internal.h: FPU internal functions mainly used to convert FPU register contents in signal handling. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-06 18:25:59 +08:00
#include <asm/fpu/api.h>
[S390] ftrace: function tracer backend for s390 This implements just the basic function tracer (_mcount) backend for s390. The dynamic variant will come later. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 20:38:56 +08:00
#include <asm/ftrace.h>
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(_mcount);
#endif
s390: use IS_ENABLED to check if a CONFIG is set to y or m This is shorter and should be used instead of the longer form which checks for both possible config options. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-01 17:08:20 +08:00
#if IS_ENABLED(CONFIG_KVM)
[S390] move sie code to entry.S The entry to / exit from sie has subtle dependencies to the first level interrupt handler. Move the sie assembler code to entry64.S and replace the SIE_HOOK callback with a test and the new _TIF_SIE bit. In addition this patch fixes several problems in regard to the check for the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing the interrupt handler and it only modified the instruction address if it pointed directly to the sie instruction. In both cases it could miss a TIF bit that normally would cause an exit from the guest and would reenter the guest context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 16:48:18 +08:00
EXPORT_SYMBOL(sie64a);
KVM: s390,perf: Detect if perf samples belong to KVM host or guest This patch is based on an original patch of David Hildenbrand. The perf core implementation calls architecture specific code in order to ask for specific information for a particular sample: perf_instruction_pointer() When perf core code asks for the instruction pointer, architecture specific code must detect if a KVM guest was running when the sample was taken. A sample can be associated with a KVM guest when the PSW supervisor state bit is set and the PSW instruction pointer part contains the address of 'sie_exit'. A KVM guest's instruction pointer information is then retrieved via gpsw entry pointed to by the sie control-block. perf_misc_flags() perf code code calls this function in order to associate the kernel vs. user state infomation with a particular sample. Architecture specific code must also first detectif a KVM guest was running at the time the sample was taken. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-12 19:54:56 +08:00
EXPORT_SYMBOL(sie_exit);
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 18:53:42 +08:00
EXPORT_SYMBOL(save_fpu_regs);
[S390] move sie code to entry.S The entry to / exit from sie has subtle dependencies to the first level interrupt handler. Move the sie assembler code to entry64.S and replace the SIE_HOOK callback with a test and the new _TIF_SIE bit. In addition this patch fixes several problems in regard to the check for the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing the interrupt handler and it only modified the instruction address if it pointed directly to the sie instruction. In both cases it could miss a TIF bit that normally would cause an exit from the guest and would reenter the guest context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 16:48:18 +08:00
#endif
s390/string: provide asm lib functions for memcpy and memcmp Our memcpy and memcmp variants were implemented by calling the corresponding gcc builtin variants. However gcc is free to replace a call to __builtin_memcmp with a call to memcmp which, when called, will result in an endless recursion within memcmp. So let's provide asm variants and also fix the variants that are used for uncompressing the kernel image. In addition remove all other occurences of builtin function calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-14 19:20:20 +08:00
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);