OpenCloudOS-Kernel/arch/arm/boot/dts/armada-385-linksys-rango.dts

204 lines
4.4 KiB
Plaintext
Raw Normal View History

/*
* Device Tree file for the Linksys WRT3200ACM (Rango)
*
* Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
*
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "armada-385-linksys.dtsi"
/ {
model = "Linksys WRT3200ACM";
compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
"marvell,armada380";
};
&expander0 {
wan_amber@0 {
label = "rango:amber:wan";
reg = <0x0>;
};
wan_white@1 {
label = "rango:white:wan";
reg = <0x1>;
};
usb2@5 {
label = "rango:white:usb2";
reg = <0x5>;
};
usb3_1@6 {
label = "rango:white:usb3_1";
reg = <0x6>;
};
usb3_2@7 {
label = "rango:white:usb3_2";
reg = <0x7>;
};
wps_white@8 {
label = "rango:white:wps";
reg = <0x8>;
};
wps_amber@9 {
label = "rango:amber:wps";
reg = <0x9>;
};
};
&gpio_leds {
power {
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
label = "rango:white:power";
};
sata {
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
label = "rango:white:sata";
};
wlan_2g {
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
label = "rango:white:wlan_2g";
};
wlan_5g {
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
label = "rango:white:wlan_5g";
};
};
&gpio_leds_pins {
marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
};
&nand {
/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
partition@0 {
label = "u-boot";
reg = <0x0000000 0x200000>; /* 2MiB */
read-only;
};
partition@200000 {
label = "u_env";
reg = <0x200000 0x20000>; /* 128KiB */
};
partition@220000 {
label = "s_env";
reg = <0x220000 0x40000>; /* 256KiB */
};
partition@7e0000 {
label = "devinfo";
reg = <0x7e0000 0x40000>; /* 256KiB */
read-only;
};
partition@820000 {
label = "sysdiag";
reg = <0x820000 0x1e0000>; /* 1920KiB */
read-only;
};
/* kernel1 overlaps with rootfs1 by design */
partition@a00000 {
label = "kernel1";
reg = <0xa00000 0x5000000>; /* 80MiB */
};
partition@1000000 {
label = "rootfs1";
reg = <0x1000000 0x4a00000>; /* 74MiB */
};
/* kernel2 overlaps with rootfs2 by design */
partition@5a00000 {
label = "kernel2";
reg = <0x5a00000 0x5000000>; /* 80MiB */
};
partition@6000000 {
label = "rootfs2";
reg = <0x6000000 0x4a00000>; /* 74MiB */
};
/*
* 86MiB, last MiB is for the BBT, not writable
*/
partition@aa00000 {
label = "syscfg";
reg = <0xaa00000 0x5600000>;
};
/*
* Unused area between "s_env" and "devinfo".
* Moved here because otherwise the renumbered
* partitions would break the bootloader
* supplied bootargs
*/
partition@180000 {
label = "unused_area";
reg = <0x260000 0x5c0000>; /* 5.75MiB */
};
};
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
no-1-8-v;
non-removable;
wp-inverted;
bus-width = <8>;
status = "okay";
};
&usb3_1_vbus {
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
&usb3_1_vbus_pins {
marvell,pins = "mpp44";
};