OpenCloudOS-Kernel/drivers/dma/dw-edma/dw-edma-pcie.c

380 lines
11 KiB
C
Raw Normal View History

dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018-2019 Synopsys, Inc. and/or its affiliates.
* Synopsys DesignWare eDMA PCIe driver
*
* Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/dma/edma.h>
#include <linux/pci-epf.h>
#include <linux/msi.h>
#include <linux/bitfield.h>
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
#include "dw-edma-core.h"
#define DW_PCIE_VSEC_DMA_ID 0x6
#define DW_PCIE_VSEC_DMA_BAR GENMASK(10, 8)
#define DW_PCIE_VSEC_DMA_MAP GENMASK(2, 0)
#define DW_PCIE_VSEC_DMA_WR_CH GENMASK(9, 0)
#define DW_PCIE_VSEC_DMA_RD_CH GENMASK(25, 16)
#define DW_BLOCK(a, b, c) \
{ \
.bar = a, \
.off = b, \
.sz = c, \
},
struct dw_edma_block {
enum pci_barno bar;
off_t off;
size_t sz;
};
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
struct dw_edma_pcie_data {
/* eDMA registers location */
struct dw_edma_block rg;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* eDMA memory linked list location */
struct dw_edma_block ll_wr[EDMA_MAX_WR_CH];
struct dw_edma_block ll_rd[EDMA_MAX_RD_CH];
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* eDMA memory data location */
struct dw_edma_block dt_wr[EDMA_MAX_WR_CH];
struct dw_edma_block dt_rd[EDMA_MAX_RD_CH];
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* Other */
enum dw_edma_map_format mf;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
u8 irqs;
u16 wr_ch_cnt;
u16 rd_ch_cnt;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
};
static const struct dw_edma_pcie_data snps_edda_data = {
/* eDMA registers location */
.rg.bar = BAR_0,
.rg.off = 0x00001000, /* 4 Kbytes */
.rg.sz = 0x00002000, /* 8 Kbytes */
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* eDMA memory linked list location */
.ll_wr = {
/* Channel 0 - BAR 2, offset 0 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00000000, 0x00000800)
/* Channel 1 - BAR 2, offset 2 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00200000, 0x00000800)
},
.ll_rd = {
/* Channel 0 - BAR 2, offset 4 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00400000, 0x00000800)
/* Channel 1 - BAR 2, offset 6 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00600000, 0x00000800)
},
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* eDMA memory data location */
.dt_wr = {
/* Channel 0 - BAR 2, offset 8 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00800000, 0x00000800)
/* Channel 1 - BAR 2, offset 9 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00900000, 0x00000800)
},
.dt_rd = {
/* Channel 0 - BAR 2, offset 10 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00a00000, 0x00000800)
/* Channel 1 - BAR 2, offset 11 Mbytes, size 2 Kbytes */
DW_BLOCK(BAR_2, 0x00b00000, 0x00000800)
},
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* Other */
.mf = EDMA_MF_EDMA_UNROLL,
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
.irqs = 1,
.wr_ch_cnt = 2,
.rd_ch_cnt = 2,
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
};
static int dw_edma_pcie_irq_vector(struct device *dev, unsigned int nr)
{
return pci_irq_vector(to_pci_dev(dev), nr);
}
static const struct dw_edma_core_ops dw_edma_pcie_core_ops = {
.irq_vector = dw_edma_pcie_irq_vector,
};
static void dw_edma_pcie_get_vsec_dma_data(struct pci_dev *pdev,
struct dw_edma_pcie_data *pdata)
{
u32 val, map;
u16 vsec;
u64 off;
vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_SYNOPSYS,
DW_PCIE_VSEC_DMA_ID);
if (!vsec)
return;
pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
if (PCI_VNDR_HEADER_REV(val) != 0x00 ||
PCI_VNDR_HEADER_LEN(val) != 0x18)
return;
pci_dbg(pdev, "Detected PCIe Vendor-Specific Extended Capability DMA\n");
pci_read_config_dword(pdev, vsec + 0x8, &val);
map = FIELD_GET(DW_PCIE_VSEC_DMA_MAP, val);
if (map != EDMA_MF_EDMA_LEGACY &&
map != EDMA_MF_EDMA_UNROLL &&
map != EDMA_MF_HDMA_COMPAT)
return;
pdata->mf = map;
pdata->rg.bar = FIELD_GET(DW_PCIE_VSEC_DMA_BAR, val);
pci_read_config_dword(pdev, vsec + 0xc, &val);
pdata->wr_ch_cnt = min_t(u16, pdata->wr_ch_cnt,
FIELD_GET(DW_PCIE_VSEC_DMA_WR_CH, val));
pdata->rd_ch_cnt = min_t(u16, pdata->rd_ch_cnt,
FIELD_GET(DW_PCIE_VSEC_DMA_RD_CH, val));
pci_read_config_dword(pdev, vsec + 0x14, &val);
off = val;
pci_read_config_dword(pdev, vsec + 0x10, &val);
off <<= 32;
off |= val;
pdata->rg.off = off;
}
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
static int dw_edma_pcie_probe(struct pci_dev *pdev,
const struct pci_device_id *pid)
{
struct dw_edma_pcie_data *pdata = (void *)pid->driver_data;
struct dw_edma_pcie_data vsec_data;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
struct device *dev = &pdev->dev;
struct dw_edma_chip *chip;
struct dw_edma *dw;
int err, nr_irqs;
int i, mask;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* Enable PCI device */
err = pcim_enable_device(pdev);
if (err) {
pci_err(pdev, "enabling device failed\n");
return err;
}
memcpy(&vsec_data, pdata, sizeof(struct dw_edma_pcie_data));
/*
* Tries to find if exists a PCIe Vendor-Specific Extended Capability
* for the DMA, if one exists, then reconfigures it.
*/
dw_edma_pcie_get_vsec_dma_data(pdev, &vsec_data);
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* Mapping PCI BAR regions */
mask = BIT(vsec_data.rg.bar);
for (i = 0; i < vsec_data.wr_ch_cnt; i++) {
mask |= BIT(vsec_data.ll_wr[i].bar);
mask |= BIT(vsec_data.dt_wr[i].bar);
}
for (i = 0; i < vsec_data.rd_ch_cnt; i++) {
mask |= BIT(vsec_data.ll_rd[i].bar);
mask |= BIT(vsec_data.dt_rd[i].bar);
}
err = pcim_iomap_regions(pdev, mask, pci_name(pdev));
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
if (err) {
pci_err(pdev, "eDMA BAR I/O remapping failed\n");
return err;
}
pci_set_master(pdev);
/* DMA configuration */
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (err) {
pci_err(pdev, "DMA mask 64 set failed\n");
return err;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
}
/* Data structure allocation */
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
dw = devm_kzalloc(dev, sizeof(*dw), GFP_KERNEL);
if (!dw)
return -ENOMEM;
/* IRQs allocation */
nr_irqs = pci_alloc_irq_vectors(pdev, 1, vsec_data.irqs,
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
PCI_IRQ_MSI | PCI_IRQ_MSIX);
if (nr_irqs < 1) {
pci_err(pdev, "fail to alloc IRQ vector (number of IRQs=%u)\n",
nr_irqs);
return -EPERM;
}
/* Data structure initialization */
chip->dw = dw;
chip->dev = dev;
chip->id = pdev->devfn;
chip->irq = pdev->irq;
dw->mf = vsec_data.mf;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
dw->nr_irqs = nr_irqs;
dw->ops = &dw_edma_pcie_core_ops;
dw->wr_ch_cnt = vsec_data.wr_ch_cnt;
dw->rd_ch_cnt = vsec_data.rd_ch_cnt;
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
dw->rg_region.vaddr = pcim_iomap_table(pdev)[vsec_data.rg.bar];
if (!dw->rg_region.vaddr)
return -ENOMEM;
dw->rg_region.vaddr += vsec_data.rg.off;
dw->rg_region.paddr = pdev->resource[vsec_data.rg.bar].start;
dw->rg_region.paddr += vsec_data.rg.off;
dw->rg_region.sz = vsec_data.rg.sz;
for (i = 0; i < dw->wr_ch_cnt; i++) {
struct dw_edma_region *ll_region = &dw->ll_region_wr[i];
struct dw_edma_region *dt_region = &dw->dt_region_wr[i];
struct dw_edma_block *ll_block = &vsec_data.ll_wr[i];
struct dw_edma_block *dt_block = &vsec_data.dt_wr[i];
ll_region->vaddr = pcim_iomap_table(pdev)[ll_block->bar];
if (!ll_region->vaddr)
return -ENOMEM;
ll_region->vaddr += ll_block->off;
ll_region->paddr = pdev->resource[ll_block->bar].start;
ll_region->paddr += ll_block->off;
ll_region->sz = ll_block->sz;
dt_region->vaddr = pcim_iomap_table(pdev)[dt_block->bar];
if (!dt_region->vaddr)
return -ENOMEM;
dt_region->vaddr += dt_block->off;
dt_region->paddr = pdev->resource[dt_block->bar].start;
dt_region->paddr += dt_block->off;
dt_region->sz = dt_block->sz;
}
for (i = 0; i < dw->rd_ch_cnt; i++) {
struct dw_edma_region *ll_region = &dw->ll_region_rd[i];
struct dw_edma_region *dt_region = &dw->dt_region_rd[i];
struct dw_edma_block *ll_block = &vsec_data.ll_rd[i];
struct dw_edma_block *dt_block = &vsec_data.dt_rd[i];
ll_region->vaddr = pcim_iomap_table(pdev)[ll_block->bar];
if (!ll_region->vaddr)
return -ENOMEM;
ll_region->vaddr += ll_block->off;
ll_region->paddr = pdev->resource[ll_block->bar].start;
ll_region->paddr += ll_block->off;
ll_region->sz = ll_block->sz;
dt_region->vaddr = pcim_iomap_table(pdev)[dt_block->bar];
if (!dt_region->vaddr)
return -ENOMEM;
dt_region->vaddr += dt_block->off;
dt_region->paddr = pdev->resource[dt_block->bar].start;
dt_region->paddr += dt_block->off;
dt_region->sz = dt_block->sz;
}
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
/* Debug info */
if (dw->mf == EDMA_MF_EDMA_LEGACY)
pci_dbg(pdev, "Version:\teDMA Port Logic (0x%x)\n", dw->mf);
else if (dw->mf == EDMA_MF_EDMA_UNROLL)
pci_dbg(pdev, "Version:\teDMA Unroll (0x%x)\n", dw->mf);
else if (dw->mf == EDMA_MF_HDMA_COMPAT)
pci_dbg(pdev, "Version:\tHDMA Compatible (0x%x)\n", dw->mf);
else
pci_dbg(pdev, "Version:\tUnknown (0x%x)\n", dw->mf);
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
pci_dbg(pdev, "Registers:\tBAR=%u, off=0x%.8lx, sz=0x%zx bytes, addr(v=%p, p=%pa)\n",
vsec_data.rg.bar, vsec_data.rg.off, vsec_data.rg.sz,
dw->rg_region.vaddr, &dw->rg_region.paddr);
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
for (i = 0; i < dw->wr_ch_cnt; i++) {
pci_dbg(pdev, "L. List:\tWRITE CH%.2u, BAR=%u, off=0x%.8lx, sz=0x%zx bytes, addr(v=%p, p=%pa)\n",
i, vsec_data.ll_wr[i].bar,
vsec_data.ll_wr[i].off, dw->ll_region_wr[i].sz,
dw->ll_region_wr[i].vaddr, &dw->ll_region_wr[i].paddr);
pci_dbg(pdev, "Data:\tWRITE CH%.2u, BAR=%u, off=0x%.8lx, sz=0x%zx bytes, addr(v=%p, p=%pa)\n",
i, vsec_data.dt_wr[i].bar,
vsec_data.dt_wr[i].off, dw->dt_region_wr[i].sz,
dw->dt_region_wr[i].vaddr, &dw->dt_region_wr[i].paddr);
}
for (i = 0; i < dw->rd_ch_cnt; i++) {
pci_dbg(pdev, "L. List:\tREAD CH%.2u, BAR=%u, off=0x%.8lx, sz=0x%zx bytes, addr(v=%p, p=%pa)\n",
i, vsec_data.ll_rd[i].bar,
vsec_data.ll_rd[i].off, dw->ll_region_rd[i].sz,
dw->ll_region_rd[i].vaddr, &dw->ll_region_rd[i].paddr);
pci_dbg(pdev, "Data:\tREAD CH%.2u, BAR=%u, off=0x%.8lx, sz=0x%zx bytes, addr(v=%p, p=%pa)\n",
i, vsec_data.dt_rd[i].bar,
vsec_data.dt_rd[i].off, dw->dt_region_rd[i].sz,
dw->dt_region_rd[i].vaddr, &dw->dt_region_rd[i].paddr);
}
dmaengine: Add Synopsys eDMA IP PCIe glue-logic Synopsys eDMA IP is normally distributed along with Synopsys PCIe EndPoint IP (depends of the use and licensing agreement). This IP requires some basic configurations, such as: - eDMA registers BAR - eDMA registers offset - eDMA registers size - eDMA linked list memory BAR - eDMA linked list memory offset - eDMA linked list memory size - eDMA data memory BAR - eDMA data memory offset - eDMA data memory size - eDMA version - eDMA mode - IRQs available for eDMA As a working example, PCIe glue-logic will attach to a Synopsys PCIe EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda), which has built-in an eDMA IP with this default configuration: - eDMA registers BAR = 0 - eDMA registers offset = 0x00001000 (4 Kbytes) - eDMA registers size = 0x00002000 (8 Kbytes) - eDMA linked list memory BAR = 2 - eDMA linked list memory offset = 0x00000000 (0 Kbytes) - eDMA linked list memory size = 0x00800000 (8 Mbytes) - eDMA data memory BAR = 2 - eDMA data memory offset = 0x00800000 (8 Mbytes) - eDMA data memory size = 0x03800000 (56 Mbytes) - eDMA version = 0 - eDMA mode = EDMA_MODE_UNROLL - IRQs = 1 This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA_PCIE option in kernel configuration, however it requires and selects automatically DW_EDMA option too. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:26 +08:00
pci_dbg(pdev, "Nr. IRQs:\t%u\n", dw->nr_irqs);
/* Validating if PCI interrupts were enabled */
if (!pci_dev_msi_enabled(pdev)) {
pci_err(pdev, "enable interrupt failed\n");
return -EPERM;
}
dw->irq = devm_kcalloc(dev, nr_irqs, sizeof(*dw->irq), GFP_KERNEL);
if (!dw->irq)
return -ENOMEM;
/* Starting eDMA driver */
err = dw_edma_probe(chip);
if (err) {
pci_err(pdev, "eDMA probe failed\n");
return err;
}
/* Saving data structure reference */
pci_set_drvdata(pdev, chip);
return 0;
}
static void dw_edma_pcie_remove(struct pci_dev *pdev)
{
struct dw_edma_chip *chip = pci_get_drvdata(pdev);
int err;
/* Stopping eDMA driver */
err = dw_edma_remove(chip);
if (err)
pci_warn(pdev, "can't remove device properly: %d\n", err);
/* Freeing IRQs */
pci_free_irq_vectors(pdev);
}
static const struct pci_device_id dw_edma_pcie_id_table[] = {
{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, &snps_edda_data) },
{ }
};
MODULE_DEVICE_TABLE(pci, dw_edma_pcie_id_table);
static struct pci_driver dw_edma_pcie_driver = {
.name = "dw-edma-pcie",
.id_table = dw_edma_pcie_id_table,
.probe = dw_edma_pcie_probe,
.remove = dw_edma_pcie_remove,
};
module_pci_driver(dw_edma_pcie_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare eDMA PCIe driver");
MODULE_AUTHOR("Gustavo Pimentel <gustavo.pimentel@synopsys.com>");