OpenCloudOS-Kernel/drivers/acpi/acpica/psutils.c

237 lines
6.8 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: psutils - Parser miscellaneous utilities (Parser only)
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acparser.h"
#include "amlcode.h"
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psutils")
/*******************************************************************************
*
* FUNCTION: acpi_ps_create_scope_op
*
* PARAMETERS: None
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 10:49:35 +08:00
* RETURN: A new Scope object, null on failure
*
* DESCRIPTION: Create a Scope and associated namepath op with the root name
*
******************************************************************************/
union acpi_parse_object *acpi_ps_create_scope_op(void)
{
union acpi_parse_object *scope_op;
scope_op = acpi_ps_alloc_op(AML_SCOPE_OP);
if (!scope_op) {
return (NULL);
}
scope_op->named.name = ACPI_ROOT_NAME;
return (scope_op);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_init_op
*
* PARAMETERS: op - A newly allocated Op object
* opcode - Opcode to store in the Op
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 10:49:35 +08:00
* RETURN: None
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 10:49:35 +08:00
* DESCRIPTION: Initialize a parse (Op) object
*
******************************************************************************/
void acpi_ps_init_op(union acpi_parse_object *op, u16 opcode)
{
ACPI_FUNCTION_ENTRY();
op->common.descriptor_type = ACPI_DESC_TYPE_PARSER;
op->common.aml_opcode = opcode;
ACPI_DISASM_ONLY_MEMBERS(ACPI_STRNCPY(op->common.aml_op_name,
(acpi_ps_get_opcode_info
(opcode))->name,
sizeof(op->common.aml_op_name)));
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_alloc_op
*
* PARAMETERS: opcode - Opcode that will be stored in the new Op
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 10:49:35 +08:00
* RETURN: Pointer to the new Op, null on failure
*
* DESCRIPTION: Allocate an acpi_op, choose op type (and thus size) based on
* opcode. A cache of opcodes is available for the pure
* GENERIC_OP, since this is by far the most commonly used.
*
******************************************************************************/
union acpi_parse_object *acpi_ps_alloc_op(u16 opcode)
{
union acpi_parse_object *op;
const struct acpi_opcode_info *op_info;
u8 flags = ACPI_PARSEOP_GENERIC;
ACPI_FUNCTION_ENTRY();
op_info = acpi_ps_get_opcode_info(opcode);
/* Determine type of parse_op required */
if (op_info->flags & AML_DEFER) {
flags = ACPI_PARSEOP_DEFERRED;
} else if (op_info->flags & AML_NAMED) {
flags = ACPI_PARSEOP_NAMED;
} else if (opcode == AML_INT_BYTELIST_OP) {
flags = ACPI_PARSEOP_BYTELIST;
}
/* Allocate the minimum required size object */
if (flags == ACPI_PARSEOP_GENERIC) {
/* The generic op (default) is by far the most common (16 to 1) */
op = acpi_os_acquire_object(acpi_gbl_ps_node_cache);
} else {
/* Extended parseop */
op = acpi_os_acquire_object(acpi_gbl_ps_node_ext_cache);
}
/* Initialize the Op */
if (op) {
acpi_ps_init_op(op, opcode);
op->common.flags = flags;
}
return (op);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_free_op
*
* PARAMETERS: op - Op to be freed
*
* RETURN: None.
*
* DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
* or actually free it.
*
******************************************************************************/
void acpi_ps_free_op(union acpi_parse_object *op)
{
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 05:15:00 +08:00
ACPI_FUNCTION_NAME(ps_free_op);
if (op->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Free retval op: %p\n",
op));
}
if (op->common.flags & ACPI_PARSEOP_GENERIC) {
(void)acpi_os_release_object(acpi_gbl_ps_node_cache, op);
} else {
(void)acpi_os_release_object(acpi_gbl_ps_node_ext_cache, op);
}
}
/*******************************************************************************
*
* FUNCTION: Utility functions
*
* DESCRIPTION: Low level character and object functions
*
******************************************************************************/
/*
* Is "c" a namestring lead character?
*/
u8 acpi_ps_is_leading_char(u32 c)
{
return ((u8) (c == '_' || (c >= 'A' && c <= 'Z')));
}
/*
* Get op's name (4-byte name segment) or 0 if unnamed
*/
#ifdef ACPI_FUTURE_USAGE
u32 acpi_ps_get_name(union acpi_parse_object * op)
{
/* The "generic" object has no name associated with it */
if (op->common.flags & ACPI_PARSEOP_GENERIC) {
return (0);
}
/* Only the "Extended" parse objects have a name */
return (op->named.name);
}
#endif /* ACPI_FUTURE_USAGE */
/*
* Set op's name
*/
void acpi_ps_set_name(union acpi_parse_object *op, u32 name)
{
/* The "generic" object has no name associated with it */
if (op->common.flags & ACPI_PARSEOP_GENERIC) {
return;
}
op->named.name = name;
}