OpenCloudOS-Kernel/drivers/vfio/pci/vfio_pci.c

1701 lines
42 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Derived from original vfio:
* Copyright 2010 Cisco Systems, Inc. All rights reserved.
* Author: Tom Lyon, pugs@cisco.com
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define dev_fmt pr_fmt
#include <linux/device.h>
#include <linux/eventfd.h>
#include <linux/file.h>
#include <linux/interrupt.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/vfio.h>
#include <linux/vgaarb.h>
#include <linux/nospec.h>
#include "vfio_pci_private.h"
#define DRIVER_VERSION "0.2"
#define DRIVER_AUTHOR "Alex Williamson <alex.williamson@redhat.com>"
#define DRIVER_DESC "VFIO PCI - User Level meta-driver"
static char ids[1024] __initdata;
module_param_string(ids, ids, sizeof(ids), 0);
MODULE_PARM_DESC(ids, "Initial PCI IDs to add to the vfio driver, format is \"vendor:device[:subvendor[:subdevice[:class[:class_mask]]]]\" and multiple comma separated entries can be specified");
static bool nointxmask;
module_param_named(nointxmask, nointxmask, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(nointxmask,
"Disable support for PCI 2.3 style INTx masking. If this resolves problems for specific devices, report lspci -vvvxxx to linux-pci@vger.kernel.org so the device can be fixed automatically via the broken_intx_masking flag.");
#ifdef CONFIG_VFIO_PCI_VGA
static bool disable_vga;
module_param(disable_vga, bool, S_IRUGO);
MODULE_PARM_DESC(disable_vga, "Disable VGA resource access through vfio-pci");
#endif
static bool disable_idle_d3;
module_param(disable_idle_d3, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(disable_idle_d3,
"Disable using the PCI D3 low power state for idle, unused devices");
static inline bool vfio_vga_disabled(void)
{
#ifdef CONFIG_VFIO_PCI_VGA
return disable_vga;
#else
return true;
#endif
}
/*
* Our VGA arbiter participation is limited since we don't know anything
* about the device itself. However, if the device is the only VGA device
* downstream of a bridge and VFIO VGA support is disabled, then we can
* safely return legacy VGA IO and memory as not decoded since the user
* has no way to get to it and routing can be disabled externally at the
* bridge.
*/
static unsigned int vfio_pci_set_vga_decode(void *opaque, bool single_vga)
{
struct vfio_pci_device *vdev = opaque;
struct pci_dev *tmp = NULL, *pdev = vdev->pdev;
unsigned char max_busnr;
unsigned int decodes;
if (single_vga || !vfio_vga_disabled() || pci_is_root_bus(pdev->bus))
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM;
max_busnr = pci_bus_max_busnr(pdev->bus);
decodes = VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
while ((tmp = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, tmp)) != NULL) {
if (tmp == pdev ||
pci_domain_nr(tmp->bus) != pci_domain_nr(pdev->bus) ||
pci_is_root_bus(tmp->bus))
continue;
if (tmp->bus->number >= pdev->bus->number &&
tmp->bus->number <= max_busnr) {
pci_dev_put(tmp);
decodes |= VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM;
break;
}
}
return decodes;
}
static inline bool vfio_pci_is_vga(struct pci_dev *pdev)
{
return (pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA;
}
static void vfio_pci_probe_mmaps(struct vfio_pci_device *vdev)
{
struct resource *res;
int bar;
struct vfio_pci_dummy_resource *dummy_res;
INIT_LIST_HEAD(&vdev->dummy_resources_list);
for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
res = vdev->pdev->resource + bar;
if (!IS_ENABLED(CONFIG_VFIO_PCI_MMAP))
goto no_mmap;
if (!(res->flags & IORESOURCE_MEM))
goto no_mmap;
/*
* The PCI core shouldn't set up a resource with a
* type but zero size. But there may be bugs that
* cause us to do that.
*/
if (!resource_size(res))
goto no_mmap;
if (resource_size(res) >= PAGE_SIZE) {
vdev->bar_mmap_supported[bar] = true;
continue;
}
if (!(res->start & ~PAGE_MASK)) {
/*
* Add a dummy resource to reserve the remainder
* of the exclusive page in case that hot-add
* device's bar is assigned into it.
*/
dummy_res = kzalloc(sizeof(*dummy_res), GFP_KERNEL);
if (dummy_res == NULL)
goto no_mmap;
dummy_res->resource.name = "vfio sub-page reserved";
dummy_res->resource.start = res->end + 1;
dummy_res->resource.end = res->start + PAGE_SIZE - 1;
dummy_res->resource.flags = res->flags;
if (request_resource(res->parent,
&dummy_res->resource)) {
kfree(dummy_res);
goto no_mmap;
}
dummy_res->index = bar;
list_add(&dummy_res->res_next,
&vdev->dummy_resources_list);
vdev->bar_mmap_supported[bar] = true;
continue;
}
/*
* Here we don't handle the case when the BAR is not page
* aligned because we can't expect the BAR will be
* assigned into the same location in a page in guest
* when we passthrough the BAR. And it's hard to access
* this BAR in userspace because we have no way to get
* the BAR's location in a page.
*/
no_mmap:
vdev->bar_mmap_supported[bar] = false;
}
}
static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev);
static void vfio_pci_disable(struct vfio_pci_device *vdev);
vfio/pci: Hide broken INTx support from user INTx masking has two components, the first is that we need the ability to prevent the device from continuing to assert INTx. This is provided via the DisINTx bit in the command register and is the only thing we can really probe for when testing if INTx masking is supported. The second component is that the device needs to indicate if INTx is asserted via the interrupt status bit in the device status register. With these two features we can generically determine if one of the devices we own is asserting INTx, signal the user, and mask the interrupt while the user services the device. Generally if one or both of these components is broken we resort to APIC level interrupt masking, which requires an exclusive interrupt since we have no way to determine the source of the interrupt in a shared configuration. This often makes it difficult or impossible to configure the system for userspace use of the device, for an interrupt mode that the user may not need. One possible configuration of broken INTx masking is that the DisINTx support is fully functional, but the interrupt status bit never signals interrupt assertion. In this case we do have the ability to prevent the device from asserting INTx, but lack the ability to identify the interrupt source. For this case we can simply pretend that the device lacks INTx support entirely, keeping DisINTx set on the physical device, virtualizing this bit for the user, and virtualizing the interrupt pin register to indicate no INTx support. We already support virtualization of the DisINTx bit and already virtualize the interrupt pin for platforms without INTx support. By tying these components together, setting DisINTx on open and reset, and identifying devices broken in this particular way, we can provide support for them w/o the handicap of APIC level INTx masking. Intel i40e (XL710/X710) 10/20/40GbE NICs have been identified as being broken in this specific way. We leave the vfio-pci.nointxmask option as a mechanism to bypass this support, enabling INTx on the device with all the requirements of APIC level masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
2016-03-25 03:05:18 +08:00
/*
* INTx masking requires the ability to disable INTx signaling via PCI_COMMAND
* _and_ the ability detect when the device is asserting INTx via PCI_STATUS.
* If a device implements the former but not the latter we would typically
* expect broken_intx_masking be set and require an exclusive interrupt.
* However since we do have control of the device's ability to assert INTx,
* we can instead pretend that the device does not implement INTx, virtualizing
* the pin register to report zero and maintaining DisINTx set on the host.
*/
static bool vfio_pci_nointx(struct pci_dev *pdev)
{
switch (pdev->vendor) {
case PCI_VENDOR_ID_INTEL:
switch (pdev->device) {
/* All i40e (XL710/X710/XXV710) 10/20/25/40GbE NICs */
vfio/pci: Hide broken INTx support from user INTx masking has two components, the first is that we need the ability to prevent the device from continuing to assert INTx. This is provided via the DisINTx bit in the command register and is the only thing we can really probe for when testing if INTx masking is supported. The second component is that the device needs to indicate if INTx is asserted via the interrupt status bit in the device status register. With these two features we can generically determine if one of the devices we own is asserting INTx, signal the user, and mask the interrupt while the user services the device. Generally if one or both of these components is broken we resort to APIC level interrupt masking, which requires an exclusive interrupt since we have no way to determine the source of the interrupt in a shared configuration. This often makes it difficult or impossible to configure the system for userspace use of the device, for an interrupt mode that the user may not need. One possible configuration of broken INTx masking is that the DisINTx support is fully functional, but the interrupt status bit never signals interrupt assertion. In this case we do have the ability to prevent the device from asserting INTx, but lack the ability to identify the interrupt source. For this case we can simply pretend that the device lacks INTx support entirely, keeping DisINTx set on the physical device, virtualizing this bit for the user, and virtualizing the interrupt pin register to indicate no INTx support. We already support virtualization of the DisINTx bit and already virtualize the interrupt pin for platforms without INTx support. By tying these components together, setting DisINTx on open and reset, and identifying devices broken in this particular way, we can provide support for them w/o the handicap of APIC level INTx masking. Intel i40e (XL710/X710) 10/20/40GbE NICs have been identified as being broken in this specific way. We leave the vfio-pci.nointxmask option as a mechanism to bypass this support, enabling INTx on the device with all the requirements of APIC level masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
2016-03-25 03:05:18 +08:00
case 0x1572:
case 0x1574:
case 0x1580 ... 0x1581:
case 0x1583 ... 0x158b:
vfio/pci: Hide broken INTx support from user INTx masking has two components, the first is that we need the ability to prevent the device from continuing to assert INTx. This is provided via the DisINTx bit in the command register and is the only thing we can really probe for when testing if INTx masking is supported. The second component is that the device needs to indicate if INTx is asserted via the interrupt status bit in the device status register. With these two features we can generically determine if one of the devices we own is asserting INTx, signal the user, and mask the interrupt while the user services the device. Generally if one or both of these components is broken we resort to APIC level interrupt masking, which requires an exclusive interrupt since we have no way to determine the source of the interrupt in a shared configuration. This often makes it difficult or impossible to configure the system for userspace use of the device, for an interrupt mode that the user may not need. One possible configuration of broken INTx masking is that the DisINTx support is fully functional, but the interrupt status bit never signals interrupt assertion. In this case we do have the ability to prevent the device from asserting INTx, but lack the ability to identify the interrupt source. For this case we can simply pretend that the device lacks INTx support entirely, keeping DisINTx set on the physical device, virtualizing this bit for the user, and virtualizing the interrupt pin register to indicate no INTx support. We already support virtualization of the DisINTx bit and already virtualize the interrupt pin for platforms without INTx support. By tying these components together, setting DisINTx on open and reset, and identifying devices broken in this particular way, we can provide support for them w/o the handicap of APIC level INTx masking. Intel i40e (XL710/X710) 10/20/40GbE NICs have been identified as being broken in this specific way. We leave the vfio-pci.nointxmask option as a mechanism to bypass this support, enabling INTx on the device with all the requirements of APIC level masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
2016-03-25 03:05:18 +08:00
case 0x37d0 ... 0x37d2:
return true;
default:
return false;
}
}
return false;
}
static void vfio_pci_probe_power_state(struct vfio_pci_device *vdev)
{
struct pci_dev *pdev = vdev->pdev;
u16 pmcsr;
if (!pdev->pm_cap)
return;
pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &pmcsr);
vdev->needs_pm_restore = !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET);
}
/*
* pci_set_power_state() wrapper handling devices which perform a soft reset on
* D3->D0 transition. Save state prior to D0/1/2->D3, stash it on the vdev,
* restore when returned to D0. Saved separately from pci_saved_state for use
* by PM capability emulation and separately from pci_dev internal saved state
* to avoid it being overwritten and consumed around other resets.
*/
int vfio_pci_set_power_state(struct vfio_pci_device *vdev, pci_power_t state)
{
struct pci_dev *pdev = vdev->pdev;
bool needs_restore = false, needs_save = false;
int ret;
if (vdev->needs_pm_restore) {
if (pdev->current_state < PCI_D3hot && state >= PCI_D3hot) {
pci_save_state(pdev);
needs_save = true;
}
if (pdev->current_state >= PCI_D3hot && state <= PCI_D0)
needs_restore = true;
}
ret = pci_set_power_state(pdev, state);
if (!ret) {
/* D3 might be unsupported via quirk, skip unless in D3 */
if (needs_save && pdev->current_state >= PCI_D3hot) {
vdev->pm_save = pci_store_saved_state(pdev);
} else if (needs_restore) {
pci_load_and_free_saved_state(pdev, &vdev->pm_save);
pci_restore_state(pdev);
}
}
return ret;
}
static int vfio_pci_enable(struct vfio_pci_device *vdev)
{
struct pci_dev *pdev = vdev->pdev;
int ret;
u16 cmd;
u8 msix_pos;
vfio_pci_set_power_state(vdev, PCI_D0);
/* Don't allow our initial saved state to include busmaster */
pci_clear_master(pdev);
ret = pci_enable_device(pdev);
if (ret)
return ret;
/* If reset fails because of the device lock, fail this path entirely */
ret = pci_try_reset_function(pdev);
if (ret == -EAGAIN) {
pci_disable_device(pdev);
return ret;
}
vdev->reset_works = !ret;
pci_save_state(pdev);
vdev->pci_saved_state = pci_store_saved_state(pdev);
if (!vdev->pci_saved_state)
pci_dbg(pdev, "%s: Couldn't store saved state\n", __func__);
vfio/pci: Hide broken INTx support from user INTx masking has two components, the first is that we need the ability to prevent the device from continuing to assert INTx. This is provided via the DisINTx bit in the command register and is the only thing we can really probe for when testing if INTx masking is supported. The second component is that the device needs to indicate if INTx is asserted via the interrupt status bit in the device status register. With these two features we can generically determine if one of the devices we own is asserting INTx, signal the user, and mask the interrupt while the user services the device. Generally if one or both of these components is broken we resort to APIC level interrupt masking, which requires an exclusive interrupt since we have no way to determine the source of the interrupt in a shared configuration. This often makes it difficult or impossible to configure the system for userspace use of the device, for an interrupt mode that the user may not need. One possible configuration of broken INTx masking is that the DisINTx support is fully functional, but the interrupt status bit never signals interrupt assertion. In this case we do have the ability to prevent the device from asserting INTx, but lack the ability to identify the interrupt source. For this case we can simply pretend that the device lacks INTx support entirely, keeping DisINTx set on the physical device, virtualizing this bit for the user, and virtualizing the interrupt pin register to indicate no INTx support. We already support virtualization of the DisINTx bit and already virtualize the interrupt pin for platforms without INTx support. By tying these components together, setting DisINTx on open and reset, and identifying devices broken in this particular way, we can provide support for them w/o the handicap of APIC level INTx masking. Intel i40e (XL710/X710) 10/20/40GbE NICs have been identified as being broken in this specific way. We leave the vfio-pci.nointxmask option as a mechanism to bypass this support, enabling INTx on the device with all the requirements of APIC level masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
2016-03-25 03:05:18 +08:00
if (likely(!nointxmask)) {
if (vfio_pci_nointx(pdev)) {
pci_info(pdev, "Masking broken INTx support\n");
vfio/pci: Hide broken INTx support from user INTx masking has two components, the first is that we need the ability to prevent the device from continuing to assert INTx. This is provided via the DisINTx bit in the command register and is the only thing we can really probe for when testing if INTx masking is supported. The second component is that the device needs to indicate if INTx is asserted via the interrupt status bit in the device status register. With these two features we can generically determine if one of the devices we own is asserting INTx, signal the user, and mask the interrupt while the user services the device. Generally if one or both of these components is broken we resort to APIC level interrupt masking, which requires an exclusive interrupt since we have no way to determine the source of the interrupt in a shared configuration. This often makes it difficult or impossible to configure the system for userspace use of the device, for an interrupt mode that the user may not need. One possible configuration of broken INTx masking is that the DisINTx support is fully functional, but the interrupt status bit never signals interrupt assertion. In this case we do have the ability to prevent the device from asserting INTx, but lack the ability to identify the interrupt source. For this case we can simply pretend that the device lacks INTx support entirely, keeping DisINTx set on the physical device, virtualizing this bit for the user, and virtualizing the interrupt pin register to indicate no INTx support. We already support virtualization of the DisINTx bit and already virtualize the interrupt pin for platforms without INTx support. By tying these components together, setting DisINTx on open and reset, and identifying devices broken in this particular way, we can provide support for them w/o the handicap of APIC level INTx masking. Intel i40e (XL710/X710) 10/20/40GbE NICs have been identified as being broken in this specific way. We leave the vfio-pci.nointxmask option as a mechanism to bypass this support, enabling INTx on the device with all the requirements of APIC level masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
2016-03-25 03:05:18 +08:00
vdev->nointx = true;
pci_intx(pdev, 0);
} else
vdev->pci_2_3 = pci_intx_mask_supported(pdev);
}
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
if (vdev->pci_2_3 && (cmd & PCI_COMMAND_INTX_DISABLE)) {
cmd &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(pdev, PCI_COMMAND, cmd);
}
vfio/pci: Hide broken INTx support from user INTx masking has two components, the first is that we need the ability to prevent the device from continuing to assert INTx. This is provided via the DisINTx bit in the command register and is the only thing we can really probe for when testing if INTx masking is supported. The second component is that the device needs to indicate if INTx is asserted via the interrupt status bit in the device status register. With these two features we can generically determine if one of the devices we own is asserting INTx, signal the user, and mask the interrupt while the user services the device. Generally if one or both of these components is broken we resort to APIC level interrupt masking, which requires an exclusive interrupt since we have no way to determine the source of the interrupt in a shared configuration. This often makes it difficult or impossible to configure the system for userspace use of the device, for an interrupt mode that the user may not need. One possible configuration of broken INTx masking is that the DisINTx support is fully functional, but the interrupt status bit never signals interrupt assertion. In this case we do have the ability to prevent the device from asserting INTx, but lack the ability to identify the interrupt source. For this case we can simply pretend that the device lacks INTx support entirely, keeping DisINTx set on the physical device, virtualizing this bit for the user, and virtualizing the interrupt pin register to indicate no INTx support. We already support virtualization of the DisINTx bit and already virtualize the interrupt pin for platforms without INTx support. By tying these components together, setting DisINTx on open and reset, and identifying devices broken in this particular way, we can provide support for them w/o the handicap of APIC level INTx masking. Intel i40e (XL710/X710) 10/20/40GbE NICs have been identified as being broken in this specific way. We leave the vfio-pci.nointxmask option as a mechanism to bypass this support, enabling INTx on the device with all the requirements of APIC level masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
2016-03-25 03:05:18 +08:00
ret = vfio_config_init(vdev);
if (ret) {
kfree(vdev->pci_saved_state);
vdev->pci_saved_state = NULL;
pci_disable_device(pdev);
return ret;
}
msix_pos = pdev->msix_cap;
if (msix_pos) {
u16 flags;
u32 table;
pci_read_config_word(pdev, msix_pos + PCI_MSIX_FLAGS, &flags);
pci_read_config_dword(pdev, msix_pos + PCI_MSIX_TABLE, &table);
vdev->msix_bar = table & PCI_MSIX_TABLE_BIR;
vdev->msix_offset = table & PCI_MSIX_TABLE_OFFSET;
vdev->msix_size = ((flags & PCI_MSIX_FLAGS_QSIZE) + 1) * 16;
} else
vdev->msix_bar = 0xFF;
if (!vfio_vga_disabled() && vfio_pci_is_vga(pdev))
vdev->has_vga = true;
if (vfio_pci_is_vga(pdev) &&
pdev->vendor == PCI_VENDOR_ID_INTEL &&
IS_ENABLED(CONFIG_VFIO_PCI_IGD)) {
ret = vfio_pci_igd_init(vdev);
if (ret) {
pci_warn(pdev, "Failed to setup Intel IGD regions\n");
vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver POWER9 Witherspoon machines come with 4 or 6 V100 GPUs which are not pluggable PCIe devices but still have PCIe links which are used for config space and MMIO. In addition to that the GPUs have 6 NVLinks which are connected to other GPUs and the POWER9 CPU. POWER9 chips have a special unit on a die called an NPU which is an NVLink2 host bus adapter with p2p connections to 2 to 3 GPUs, 3 or 2 NVLinks to each. These systems also support ATS (address translation services) which is a part of the NVLink2 protocol. Such GPUs also share on-board RAM (16GB or 32GB) to the system via the same NVLink2 so a CPU has cache-coherent access to a GPU RAM. This exports GPU RAM to the userspace as a new VFIO device region. This preregisters the new memory as device memory as it might be used for DMA. This inserts pfns from the fault handler as the GPU memory is not onlined until the vendor driver is loaded and trained the NVLinks so doing this earlier causes low level errors which we fence in the firmware so it does not hurt the host system but still better be avoided; for the same reason this does not map GPU RAM into the host kernel (usual thing for emulated access otherwise). This exports an ATSD (Address Translation Shootdown) register of NPU which allows TLB invalidations inside GPU for an operating system. The register conveniently occupies a single 64k page. It is also presented to the userspace as a new VFIO device region. One NPU has 8 ATSD registers, each of them can be used for TLB invalidation in a GPU linked to this NPU. This allocates one ATSD register per an NVLink bridge allowing passing up to 6 registers. Due to the host firmware bug (just recently fixed), only 1 ATSD register per NPU was actually advertised to the host system so this passes that alone register via the first NVLink bridge device in the group which is still enough as QEMU collects them all back and presents to the guest via vPHB to mimic the emulated NPU PHB on the host. In order to provide the userspace with the information about GPU-to-NVLink connections, this exports an additional capability called "tgt" (which is an abbreviated host system bus address). The "tgt" property tells the GPU its own system address and allows the guest driver to conglomerate the routing information so each GPU knows how to get directly to the other GPUs. For ATS to work, the nest MMU (an NVIDIA block in a P9 CPU) needs to know LPID (a logical partition ID or a KVM guest hardware ID in other words) and PID (a memory context ID of a userspace process, not to be confused with a linux pid). This assigns a GPU to LPID in the NPU and this is why this adds a listener for KVM on an IOMMU group. A PID comes via NVLink from a GPU and NPU uses a PID wildcard to pass it through. This requires coherent memory and ATSD to be available on the host as the GPU vendor only supports configurations with both features enabled and other configurations are known not to work. Because of this and because of the ways the features are advertised to the host system (which is a device tree with very platform specific properties), this requires enabled POWERNV platform. The V100 GPUs do not advertise any of these capabilities via the config space and there are more than just one device ID so this relies on the platform to tell whether these GPUs have special abilities such as NVLinks. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20 09:10:36 +08:00
goto disable_exit;
}
}
if (pdev->vendor == PCI_VENDOR_ID_NVIDIA &&
IS_ENABLED(CONFIG_VFIO_PCI_NVLINK2)) {
ret = vfio_pci_nvdia_v100_nvlink2_init(vdev);
if (ret && ret != -ENODEV) {
pci_warn(pdev, "Failed to setup NVIDIA NV2 RAM region\n");
vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver POWER9 Witherspoon machines come with 4 or 6 V100 GPUs which are not pluggable PCIe devices but still have PCIe links which are used for config space and MMIO. In addition to that the GPUs have 6 NVLinks which are connected to other GPUs and the POWER9 CPU. POWER9 chips have a special unit on a die called an NPU which is an NVLink2 host bus adapter with p2p connections to 2 to 3 GPUs, 3 or 2 NVLinks to each. These systems also support ATS (address translation services) which is a part of the NVLink2 protocol. Such GPUs also share on-board RAM (16GB or 32GB) to the system via the same NVLink2 so a CPU has cache-coherent access to a GPU RAM. This exports GPU RAM to the userspace as a new VFIO device region. This preregisters the new memory as device memory as it might be used for DMA. This inserts pfns from the fault handler as the GPU memory is not onlined until the vendor driver is loaded and trained the NVLinks so doing this earlier causes low level errors which we fence in the firmware so it does not hurt the host system but still better be avoided; for the same reason this does not map GPU RAM into the host kernel (usual thing for emulated access otherwise). This exports an ATSD (Address Translation Shootdown) register of NPU which allows TLB invalidations inside GPU for an operating system. The register conveniently occupies a single 64k page. It is also presented to the userspace as a new VFIO device region. One NPU has 8 ATSD registers, each of them can be used for TLB invalidation in a GPU linked to this NPU. This allocates one ATSD register per an NVLink bridge allowing passing up to 6 registers. Due to the host firmware bug (just recently fixed), only 1 ATSD register per NPU was actually advertised to the host system so this passes that alone register via the first NVLink bridge device in the group which is still enough as QEMU collects them all back and presents to the guest via vPHB to mimic the emulated NPU PHB on the host. In order to provide the userspace with the information about GPU-to-NVLink connections, this exports an additional capability called "tgt" (which is an abbreviated host system bus address). The "tgt" property tells the GPU its own system address and allows the guest driver to conglomerate the routing information so each GPU knows how to get directly to the other GPUs. For ATS to work, the nest MMU (an NVIDIA block in a P9 CPU) needs to know LPID (a logical partition ID or a KVM guest hardware ID in other words) and PID (a memory context ID of a userspace process, not to be confused with a linux pid). This assigns a GPU to LPID in the NPU and this is why this adds a listener for KVM on an IOMMU group. A PID comes via NVLink from a GPU and NPU uses a PID wildcard to pass it through. This requires coherent memory and ATSD to be available on the host as the GPU vendor only supports configurations with both features enabled and other configurations are known not to work. Because of this and because of the ways the features are advertised to the host system (which is a device tree with very platform specific properties), this requires enabled POWERNV platform. The V100 GPUs do not advertise any of these capabilities via the config space and there are more than just one device ID so this relies on the platform to tell whether these GPUs have special abilities such as NVLinks. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20 09:10:36 +08:00
goto disable_exit;
}
}
if (pdev->vendor == PCI_VENDOR_ID_IBM &&
IS_ENABLED(CONFIG_VFIO_PCI_NVLINK2)) {
ret = vfio_pci_ibm_npu2_init(vdev);
if (ret && ret != -ENODEV) {
pci_warn(pdev, "Failed to setup NVIDIA NV2 ATSD region\n");
vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver POWER9 Witherspoon machines come with 4 or 6 V100 GPUs which are not pluggable PCIe devices but still have PCIe links which are used for config space and MMIO. In addition to that the GPUs have 6 NVLinks which are connected to other GPUs and the POWER9 CPU. POWER9 chips have a special unit on a die called an NPU which is an NVLink2 host bus adapter with p2p connections to 2 to 3 GPUs, 3 or 2 NVLinks to each. These systems also support ATS (address translation services) which is a part of the NVLink2 protocol. Such GPUs also share on-board RAM (16GB or 32GB) to the system via the same NVLink2 so a CPU has cache-coherent access to a GPU RAM. This exports GPU RAM to the userspace as a new VFIO device region. This preregisters the new memory as device memory as it might be used for DMA. This inserts pfns from the fault handler as the GPU memory is not onlined until the vendor driver is loaded and trained the NVLinks so doing this earlier causes low level errors which we fence in the firmware so it does not hurt the host system but still better be avoided; for the same reason this does not map GPU RAM into the host kernel (usual thing for emulated access otherwise). This exports an ATSD (Address Translation Shootdown) register of NPU which allows TLB invalidations inside GPU for an operating system. The register conveniently occupies a single 64k page. It is also presented to the userspace as a new VFIO device region. One NPU has 8 ATSD registers, each of them can be used for TLB invalidation in a GPU linked to this NPU. This allocates one ATSD register per an NVLink bridge allowing passing up to 6 registers. Due to the host firmware bug (just recently fixed), only 1 ATSD register per NPU was actually advertised to the host system so this passes that alone register via the first NVLink bridge device in the group which is still enough as QEMU collects them all back and presents to the guest via vPHB to mimic the emulated NPU PHB on the host. In order to provide the userspace with the information about GPU-to-NVLink connections, this exports an additional capability called "tgt" (which is an abbreviated host system bus address). The "tgt" property tells the GPU its own system address and allows the guest driver to conglomerate the routing information so each GPU knows how to get directly to the other GPUs. For ATS to work, the nest MMU (an NVIDIA block in a P9 CPU) needs to know LPID (a logical partition ID or a KVM guest hardware ID in other words) and PID (a memory context ID of a userspace process, not to be confused with a linux pid). This assigns a GPU to LPID in the NPU and this is why this adds a listener for KVM on an IOMMU group. A PID comes via NVLink from a GPU and NPU uses a PID wildcard to pass it through. This requires coherent memory and ATSD to be available on the host as the GPU vendor only supports configurations with both features enabled and other configurations are known not to work. Because of this and because of the ways the features are advertised to the host system (which is a device tree with very platform specific properties), this requires enabled POWERNV platform. The V100 GPUs do not advertise any of these capabilities via the config space and there are more than just one device ID so this relies on the platform to tell whether these GPUs have special abilities such as NVLinks. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20 09:10:36 +08:00
goto disable_exit;
}
}
vfio_pci_probe_mmaps(vdev);
return 0;
vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver POWER9 Witherspoon machines come with 4 or 6 V100 GPUs which are not pluggable PCIe devices but still have PCIe links which are used for config space and MMIO. In addition to that the GPUs have 6 NVLinks which are connected to other GPUs and the POWER9 CPU. POWER9 chips have a special unit on a die called an NPU which is an NVLink2 host bus adapter with p2p connections to 2 to 3 GPUs, 3 or 2 NVLinks to each. These systems also support ATS (address translation services) which is a part of the NVLink2 protocol. Such GPUs also share on-board RAM (16GB or 32GB) to the system via the same NVLink2 so a CPU has cache-coherent access to a GPU RAM. This exports GPU RAM to the userspace as a new VFIO device region. This preregisters the new memory as device memory as it might be used for DMA. This inserts pfns from the fault handler as the GPU memory is not onlined until the vendor driver is loaded and trained the NVLinks so doing this earlier causes low level errors which we fence in the firmware so it does not hurt the host system but still better be avoided; for the same reason this does not map GPU RAM into the host kernel (usual thing for emulated access otherwise). This exports an ATSD (Address Translation Shootdown) register of NPU which allows TLB invalidations inside GPU for an operating system. The register conveniently occupies a single 64k page. It is also presented to the userspace as a new VFIO device region. One NPU has 8 ATSD registers, each of them can be used for TLB invalidation in a GPU linked to this NPU. This allocates one ATSD register per an NVLink bridge allowing passing up to 6 registers. Due to the host firmware bug (just recently fixed), only 1 ATSD register per NPU was actually advertised to the host system so this passes that alone register via the first NVLink bridge device in the group which is still enough as QEMU collects them all back and presents to the guest via vPHB to mimic the emulated NPU PHB on the host. In order to provide the userspace with the information about GPU-to-NVLink connections, this exports an additional capability called "tgt" (which is an abbreviated host system bus address). The "tgt" property tells the GPU its own system address and allows the guest driver to conglomerate the routing information so each GPU knows how to get directly to the other GPUs. For ATS to work, the nest MMU (an NVIDIA block in a P9 CPU) needs to know LPID (a logical partition ID or a KVM guest hardware ID in other words) and PID (a memory context ID of a userspace process, not to be confused with a linux pid). This assigns a GPU to LPID in the NPU and this is why this adds a listener for KVM on an IOMMU group. A PID comes via NVLink from a GPU and NPU uses a PID wildcard to pass it through. This requires coherent memory and ATSD to be available on the host as the GPU vendor only supports configurations with both features enabled and other configurations are known not to work. Because of this and because of the ways the features are advertised to the host system (which is a device tree with very platform specific properties), this requires enabled POWERNV platform. The V100 GPUs do not advertise any of these capabilities via the config space and there are more than just one device ID so this relies on the platform to tell whether these GPUs have special abilities such as NVLinks. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20 09:10:36 +08:00
disable_exit:
vfio_pci_disable(vdev);
return ret;
}
static void vfio_pci_disable(struct vfio_pci_device *vdev)
{
struct pci_dev *pdev = vdev->pdev;
struct vfio_pci_dummy_resource *dummy_res, *tmp;
struct vfio_pci_ioeventfd *ioeventfd, *ioeventfd_tmp;
int i, bar;
/* Stop the device from further DMA */
pci_clear_master(pdev);
vfio_pci_set_irqs_ioctl(vdev, VFIO_IRQ_SET_DATA_NONE |
VFIO_IRQ_SET_ACTION_TRIGGER,
vdev->irq_type, 0, 0, NULL);
/* Device closed, don't need mutex here */
list_for_each_entry_safe(ioeventfd, ioeventfd_tmp,
&vdev->ioeventfds_list, next) {
vfio_virqfd_disable(&ioeventfd->virqfd);
list_del(&ioeventfd->next);
kfree(ioeventfd);
}
vdev->ioeventfds_nr = 0;
vdev->virq_disabled = false;
for (i = 0; i < vdev->num_regions; i++)
vdev->region[i].ops->release(vdev, &vdev->region[i]);
vdev->num_regions = 0;
kfree(vdev->region);
vdev->region = NULL; /* don't krealloc a freed pointer */
vfio_config_free(vdev);
for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
if (!vdev->barmap[bar])
continue;
pci_iounmap(pdev, vdev->barmap[bar]);
pci_release_selected_regions(pdev, 1 << bar);
vdev->barmap[bar] = NULL;
}
list_for_each_entry_safe(dummy_res, tmp,
&vdev->dummy_resources_list, res_next) {
list_del(&dummy_res->res_next);
release_resource(&dummy_res->resource);
kfree(dummy_res);
}
vdev->needs_reset = true;
/*
* If we have saved state, restore it. If we can reset the device,
* even better. Resetting with current state seems better than
* nothing, but saving and restoring current state without reset
* is just busy work.
*/
if (pci_load_and_free_saved_state(pdev, &vdev->pci_saved_state)) {
pci_info(pdev, "%s: Couldn't reload saved state\n", __func__);
if (!vdev->reset_works)
goto out;
pci_save_state(pdev);
}
/*
* Disable INTx and MSI, presumably to avoid spurious interrupts
* during reset. Stolen from pci_reset_function()
*/
pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
/*
* Try to reset the device. The success of this is dependent on
* being able to lock the device, which is not always possible.
*/
if (vdev->reset_works && !pci_try_reset_function(pdev))
vdev->needs_reset = false;
pci_restore_state(pdev);
out:
pci_disable_device(pdev);
vfio_pci_try_bus_reset(vdev);
if (!disable_idle_d3)
vfio_pci_set_power_state(vdev, PCI_D3hot);
}
static void vfio_pci_release(void *device_data)
{
struct vfio_pci_device *vdev = device_data;
mutex_lock(&vdev->reflck->lock);
if (!(--vdev->refcnt)) {
vfio_spapr_pci_eeh_release(vdev->pdev);
vfio_pci_disable(vdev);
}
mutex_unlock(&vdev->reflck->lock);
module_put(THIS_MODULE);
}
static int vfio_pci_open(void *device_data)
{
struct vfio_pci_device *vdev = device_data;
int ret = 0;
if (!try_module_get(THIS_MODULE))
return -ENODEV;
mutex_lock(&vdev->reflck->lock);
if (!vdev->refcnt) {
ret = vfio_pci_enable(vdev);
if (ret)
goto error;
vfio_spapr_pci_eeh_open(vdev->pdev);
}
vdev->refcnt++;
error:
mutex_unlock(&vdev->reflck->lock);
if (ret)
module_put(THIS_MODULE);
return ret;
}
static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
{
if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
u8 pin;
if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) ||
vdev->nointx || vdev->pdev->is_virtfn)
return 0;
pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
return pin ? 1 : 0;
} else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) {
u8 pos;
u16 flags;
pos = vdev->pdev->msi_cap;
if (pos) {
pci_read_config_word(vdev->pdev,
pos + PCI_MSI_FLAGS, &flags);
return 1 << ((flags & PCI_MSI_FLAGS_QMASK) >> 1);
}
} else if (irq_type == VFIO_PCI_MSIX_IRQ_INDEX) {
u8 pos;
u16 flags;
pos = vdev->pdev->msix_cap;
if (pos) {
pci_read_config_word(vdev->pdev,
pos + PCI_MSIX_FLAGS, &flags);
return (flags & PCI_MSIX_FLAGS_QSIZE) + 1;
}
} else if (irq_type == VFIO_PCI_ERR_IRQ_INDEX) {
if (pci_is_pcie(vdev->pdev))
return 1;
} else if (irq_type == VFIO_PCI_REQ_IRQ_INDEX) {
return 1;
}
return 0;
}
static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
{
(*(int *)data)++;
return 0;
}
struct vfio_pci_fill_info {
int max;
int cur;
struct vfio_pci_dependent_device *devices;
};
static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
{
struct vfio_pci_fill_info *fill = data;
struct iommu_group *iommu_group;
if (fill->cur == fill->max)
return -EAGAIN; /* Something changed, try again */
iommu_group = iommu_group_get(&pdev->dev);
if (!iommu_group)
return -EPERM; /* Cannot reset non-isolated devices */
fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
fill->devices[fill->cur].segment = pci_domain_nr(pdev->bus);
fill->devices[fill->cur].bus = pdev->bus->number;
fill->devices[fill->cur].devfn = pdev->devfn;
fill->cur++;
iommu_group_put(iommu_group);
return 0;
}
struct vfio_pci_group_entry {
struct vfio_group *group;
int id;
};
struct vfio_pci_group_info {
int count;
struct vfio_pci_group_entry *groups;
};
static int vfio_pci_validate_devs(struct pci_dev *pdev, void *data)
{
struct vfio_pci_group_info *info = data;
struct iommu_group *group;
int id, i;
group = iommu_group_get(&pdev->dev);
if (!group)
return -EPERM;
id = iommu_group_id(group);
for (i = 0; i < info->count; i++)
if (info->groups[i].id == id)
break;
iommu_group_put(group);
return (i == info->count) ? -EINVAL : 0;
}
static bool vfio_pci_dev_below_slot(struct pci_dev *pdev, struct pci_slot *slot)
{
for (; pdev; pdev = pdev->bus->self)
if (pdev->bus == slot->bus)
return (pdev->slot == slot);
return false;
}
struct vfio_pci_walk_info {
int (*fn)(struct pci_dev *, void *data);
void *data;
struct pci_dev *pdev;
bool slot;
int ret;
};
static int vfio_pci_walk_wrapper(struct pci_dev *pdev, void *data)
{
struct vfio_pci_walk_info *walk = data;
if (!walk->slot || vfio_pci_dev_below_slot(pdev, walk->pdev->slot))
walk->ret = walk->fn(pdev, walk->data);
return walk->ret;
}
static int vfio_pci_for_each_slot_or_bus(struct pci_dev *pdev,
int (*fn)(struct pci_dev *,
void *data), void *data,
bool slot)
{
struct vfio_pci_walk_info walk = {
.fn = fn, .data = data, .pdev = pdev, .slot = slot, .ret = 0,
};
pci_walk_bus(pdev->bus, vfio_pci_walk_wrapper, &walk);
return walk.ret;
}
static int msix_mmappable_cap(struct vfio_pci_device *vdev,
struct vfio_info_cap *caps)
{
struct vfio_info_cap_header header = {
.id = VFIO_REGION_INFO_CAP_MSIX_MAPPABLE,
.version = 1
};
return vfio_info_add_capability(caps, &header, sizeof(header));
}
int vfio_pci_register_dev_region(struct vfio_pci_device *vdev,
unsigned int type, unsigned int subtype,
const struct vfio_pci_regops *ops,
size_t size, u32 flags, void *data)
{
struct vfio_pci_region *region;
region = krealloc(vdev->region,
(vdev->num_regions + 1) * sizeof(*region),
GFP_KERNEL);
if (!region)
return -ENOMEM;
vdev->region = region;
vdev->region[vdev->num_regions].type = type;
vdev->region[vdev->num_regions].subtype = subtype;
vdev->region[vdev->num_regions].ops = ops;
vdev->region[vdev->num_regions].size = size;
vdev->region[vdev->num_regions].flags = flags;
vdev->region[vdev->num_regions].data = data;
vdev->num_regions++;
return 0;
}
static long vfio_pci_ioctl(void *device_data,
unsigned int cmd, unsigned long arg)
{
struct vfio_pci_device *vdev = device_data;
unsigned long minsz;
if (cmd == VFIO_DEVICE_GET_INFO) {
struct vfio_device_info info;
minsz = offsetofend(struct vfio_device_info, num_irqs);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.flags = VFIO_DEVICE_FLAGS_PCI;
if (vdev->reset_works)
info.flags |= VFIO_DEVICE_FLAGS_RESET;
info.num_regions = VFIO_PCI_NUM_REGIONS + vdev->num_regions;
info.num_irqs = VFIO_PCI_NUM_IRQS;
return copy_to_user((void __user *)arg, &info, minsz) ?
-EFAULT : 0;
} else if (cmd == VFIO_DEVICE_GET_REGION_INFO) {
struct pci_dev *pdev = vdev->pdev;
struct vfio_region_info info;
struct vfio_info_cap caps = { .buf = NULL, .size = 0 };
int i, ret;
minsz = offsetofend(struct vfio_region_info, offset);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
switch (info.index) {
case VFIO_PCI_CONFIG_REGION_INDEX:
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = pdev->cfg_size;
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
break;
case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = pci_resource_len(pdev, info.index);
if (!info.size) {
info.flags = 0;
break;
}
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
if (vdev->bar_mmap_supported[info.index]) {
info.flags |= VFIO_REGION_INFO_FLAG_MMAP;
if (info.index == vdev->msix_bar) {
ret = msix_mmappable_cap(vdev, &caps);
if (ret)
return ret;
}
}
break;
case VFIO_PCI_ROM_REGION_INDEX:
{
void __iomem *io;
size_t size;
u16 orig_cmd;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.flags = 0;
/* Report the BAR size, not the ROM size */
info.size = pci_resource_len(pdev, info.index);
if (!info.size) {
/* Shadow ROMs appear as PCI option ROMs */
if (pdev->resource[PCI_ROM_RESOURCE].flags &
IORESOURCE_ROM_SHADOW)
info.size = 0x20000;
else
break;
}
/*
* Is it really there? Enable memory decode for
* implicit access in pci_map_rom().
*/
pci_read_config_word(pdev, PCI_COMMAND, &orig_cmd);
pci_write_config_word(pdev, PCI_COMMAND,
orig_cmd | PCI_COMMAND_MEMORY);
io = pci_map_rom(pdev, &size);
if (io) {
info.flags = VFIO_REGION_INFO_FLAG_READ;
pci_unmap_rom(pdev, io);
} else {
info.size = 0;
}
pci_write_config_word(pdev, PCI_COMMAND, orig_cmd);
break;
}
case VFIO_PCI_VGA_REGION_INDEX:
if (!vdev->has_vga)
return -EINVAL;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = 0xc0000;
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
break;
default:
{
struct vfio_region_info_cap_type cap_type = {
.header.id = VFIO_REGION_INFO_CAP_TYPE,
.header.version = 1 };
if (info.index >=
VFIO_PCI_NUM_REGIONS + vdev->num_regions)
return -EINVAL;
info.index = array_index_nospec(info.index,
VFIO_PCI_NUM_REGIONS +
vdev->num_regions);
i = info.index - VFIO_PCI_NUM_REGIONS;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = vdev->region[i].size;
info.flags = vdev->region[i].flags;
cap_type.type = vdev->region[i].type;
cap_type.subtype = vdev->region[i].subtype;
ret = vfio_info_add_capability(&caps, &cap_type.header,
sizeof(cap_type));
if (ret)
return ret;
if (vdev->region[i].ops->add_capability) {
ret = vdev->region[i].ops->add_capability(vdev,
&vdev->region[i], &caps);
if (ret)
return ret;
}
}
}
if (caps.size) {
info.flags |= VFIO_REGION_INFO_FLAG_CAPS;
if (info.argsz < sizeof(info) + caps.size) {
info.argsz = sizeof(info) + caps.size;
info.cap_offset = 0;
} else {
vfio_info_cap_shift(&caps, sizeof(info));
if (copy_to_user((void __user *)arg +
sizeof(info), caps.buf,
caps.size)) {
kfree(caps.buf);
return -EFAULT;
}
info.cap_offset = sizeof(info);
}
kfree(caps.buf);
}
return copy_to_user((void __user *)arg, &info, minsz) ?
-EFAULT : 0;
} else if (cmd == VFIO_DEVICE_GET_IRQ_INFO) {
struct vfio_irq_info info;
minsz = offsetofend(struct vfio_irq_info, count);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz || info.index >= VFIO_PCI_NUM_IRQS)
return -EINVAL;
switch (info.index) {
case VFIO_PCI_INTX_IRQ_INDEX ... VFIO_PCI_MSIX_IRQ_INDEX:
case VFIO_PCI_REQ_IRQ_INDEX:
break;
case VFIO_PCI_ERR_IRQ_INDEX:
if (pci_is_pcie(vdev->pdev))
break;
/* fall through */
default:
return -EINVAL;
}
info.flags = VFIO_IRQ_INFO_EVENTFD;
info.count = vfio_pci_get_irq_count(vdev, info.index);
if (info.index == VFIO_PCI_INTX_IRQ_INDEX)
info.flags |= (VFIO_IRQ_INFO_MASKABLE |
VFIO_IRQ_INFO_AUTOMASKED);
else
info.flags |= VFIO_IRQ_INFO_NORESIZE;
return copy_to_user((void __user *)arg, &info, minsz) ?
-EFAULT : 0;
} else if (cmd == VFIO_DEVICE_SET_IRQS) {
struct vfio_irq_set hdr;
u8 *data = NULL;
int max, ret = 0;
size_t data_size = 0;
minsz = offsetofend(struct vfio_irq_set, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
max = vfio_pci_get_irq_count(vdev, hdr.index);
ret = vfio_set_irqs_validate_and_prepare(&hdr, max,
VFIO_PCI_NUM_IRQS, &data_size);
if (ret)
return ret;
if (data_size) {
data = memdup_user((void __user *)(arg + minsz),
data_size);
if (IS_ERR(data))
return PTR_ERR(data);
}
mutex_lock(&vdev->igate);
ret = vfio_pci_set_irqs_ioctl(vdev, hdr.flags, hdr.index,
hdr.start, hdr.count, data);
mutex_unlock(&vdev->igate);
kfree(data);
return ret;
} else if (cmd == VFIO_DEVICE_RESET) {
return vdev->reset_works ?
pci_try_reset_function(vdev->pdev) : -EINVAL;
} else if (cmd == VFIO_DEVICE_GET_PCI_HOT_RESET_INFO) {
struct vfio_pci_hot_reset_info hdr;
struct vfio_pci_fill_info fill = { 0 };
struct vfio_pci_dependent_device *devices = NULL;
bool slot = false;
int ret = 0;
minsz = offsetofend(struct vfio_pci_hot_reset_info, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz)
return -EINVAL;
hdr.flags = 0;
/* Can we do a slot or bus reset or neither? */
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return -ENODEV;
/* How many devices are affected? */
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_count_devs,
&fill.max, slot);
if (ret)
return ret;
WARN_ON(!fill.max); /* Should always be at least one */
/*
* If there's enough space, fill it now, otherwise return
* -ENOSPC and the number of devices affected.
*/
if (hdr.argsz < sizeof(hdr) + (fill.max * sizeof(*devices))) {
ret = -ENOSPC;
hdr.count = fill.max;
goto reset_info_exit;
}
devices = kcalloc(fill.max, sizeof(*devices), GFP_KERNEL);
if (!devices)
return -ENOMEM;
fill.devices = devices;
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_fill_devs,
&fill, slot);
/*
* If a device was removed between counting and filling,
* we may come up short of fill.max. If a device was
* added, we'll have a return of -EAGAIN above.
*/
if (!ret)
hdr.count = fill.cur;
reset_info_exit:
if (copy_to_user((void __user *)arg, &hdr, minsz))
ret = -EFAULT;
if (!ret) {
if (copy_to_user((void __user *)(arg + minsz), devices,
hdr.count * sizeof(*devices)))
ret = -EFAULT;
}
kfree(devices);
return ret;
} else if (cmd == VFIO_DEVICE_PCI_HOT_RESET) {
struct vfio_pci_hot_reset hdr;
int32_t *group_fds;
struct vfio_pci_group_entry *groups;
struct vfio_pci_group_info info;
bool slot = false;
int i, count = 0, ret = 0;
minsz = offsetofend(struct vfio_pci_hot_reset, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz || hdr.flags)
return -EINVAL;
/* Can we do a slot or bus reset or neither? */
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return -ENODEV;
/*
* We can't let userspace give us an arbitrarily large
* buffer to copy, so verify how many we think there
* could be. Note groups can have multiple devices so
* one group per device is the max.
*/
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_count_devs,
&count, slot);
if (ret)
return ret;
/* Somewhere between 1 and count is OK */
if (!hdr.count || hdr.count > count)
return -EINVAL;
group_fds = kcalloc(hdr.count, sizeof(*group_fds), GFP_KERNEL);
groups = kcalloc(hdr.count, sizeof(*groups), GFP_KERNEL);
if (!group_fds || !groups) {
kfree(group_fds);
kfree(groups);
return -ENOMEM;
}
if (copy_from_user(group_fds, (void __user *)(arg + minsz),
hdr.count * sizeof(*group_fds))) {
kfree(group_fds);
kfree(groups);
return -EFAULT;
}
/*
* For each group_fd, get the group through the vfio external
* user interface and store the group and iommu ID. This
* ensures the group is held across the reset.
*/
for (i = 0; i < hdr.count; i++) {
struct vfio_group *group;
struct fd f = fdget(group_fds[i]);
if (!f.file) {
ret = -EBADF;
break;
}
group = vfio_group_get_external_user(f.file);
fdput(f);
if (IS_ERR(group)) {
ret = PTR_ERR(group);
break;
}
groups[i].group = group;
groups[i].id = vfio_external_user_iommu_id(group);
}
kfree(group_fds);
/* release reference to groups on error */
if (ret)
goto hot_reset_release;
info.count = hdr.count;
info.groups = groups;
/*
* Test whether all the affected devices are contained
* by the set of groups provided by the user.
*/
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_validate_devs,
&info, slot);
if (!ret)
/* User has access, do the reset */
ret = pci_reset_bus(vdev->pdev);
hot_reset_release:
for (i--; i >= 0; i--)
vfio_group_put_external_user(groups[i].group);
kfree(groups);
return ret;
} else if (cmd == VFIO_DEVICE_IOEVENTFD) {
struct vfio_device_ioeventfd ioeventfd;
int count;
minsz = offsetofend(struct vfio_device_ioeventfd, fd);
if (copy_from_user(&ioeventfd, (void __user *)arg, minsz))
return -EFAULT;
if (ioeventfd.argsz < minsz)
return -EINVAL;
if (ioeventfd.flags & ~VFIO_DEVICE_IOEVENTFD_SIZE_MASK)
return -EINVAL;
count = ioeventfd.flags & VFIO_DEVICE_IOEVENTFD_SIZE_MASK;
if (hweight8(count) != 1 || ioeventfd.fd < -1)
return -EINVAL;
return vfio_pci_ioeventfd(vdev, ioeventfd.offset,
ioeventfd.data, count, ioeventfd.fd);
}
return -ENOTTY;
}
static ssize_t vfio_pci_rw(void *device_data, char __user *buf,
size_t count, loff_t *ppos, bool iswrite)
{
unsigned int index = VFIO_PCI_OFFSET_TO_INDEX(*ppos);
struct vfio_pci_device *vdev = device_data;
if (index >= VFIO_PCI_NUM_REGIONS + vdev->num_regions)
return -EINVAL;
switch (index) {
case VFIO_PCI_CONFIG_REGION_INDEX:
return vfio_pci_config_rw(vdev, buf, count, ppos, iswrite);
case VFIO_PCI_ROM_REGION_INDEX:
if (iswrite)
return -EINVAL;
return vfio_pci_bar_rw(vdev, buf, count, ppos, false);
case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
return vfio_pci_bar_rw(vdev, buf, count, ppos, iswrite);
case VFIO_PCI_VGA_REGION_INDEX:
return vfio_pci_vga_rw(vdev, buf, count, ppos, iswrite);
default:
index -= VFIO_PCI_NUM_REGIONS;
return vdev->region[index].ops->rw(vdev, buf,
count, ppos, iswrite);
}
return -EINVAL;
}
static ssize_t vfio_pci_read(void *device_data, char __user *buf,
size_t count, loff_t *ppos)
{
if (!count)
return 0;
return vfio_pci_rw(device_data, buf, count, ppos, false);
}
static ssize_t vfio_pci_write(void *device_data, const char __user *buf,
size_t count, loff_t *ppos)
{
if (!count)
return 0;
return vfio_pci_rw(device_data, (char __user *)buf, count, ppos, true);
}
static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma)
{
struct vfio_pci_device *vdev = device_data;
struct pci_dev *pdev = vdev->pdev;
unsigned int index;
u64 phys_len, req_len, pgoff, req_start;
int ret;
index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
if (vma->vm_end < vma->vm_start)
return -EINVAL;
if ((vma->vm_flags & VM_SHARED) == 0)
return -EINVAL;
if (index >= VFIO_PCI_NUM_REGIONS) {
int regnum = index - VFIO_PCI_NUM_REGIONS;
struct vfio_pci_region *region = vdev->region + regnum;
if (region && region->ops && region->ops->mmap &&
(region->flags & VFIO_REGION_INFO_FLAG_MMAP))
return region->ops->mmap(vdev, region, vma);
return -EINVAL;
}
if (index >= VFIO_PCI_ROM_REGION_INDEX)
return -EINVAL;
if (!vdev->bar_mmap_supported[index])
return -EINVAL;
phys_len = PAGE_ALIGN(pci_resource_len(pdev, index));
req_len = vma->vm_end - vma->vm_start;
pgoff = vma->vm_pgoff &
((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
req_start = pgoff << PAGE_SHIFT;
if (req_start + req_len > phys_len)
return -EINVAL;
/*
* Even though we don't make use of the barmap for the mmap,
* we need to request the region and the barmap tracks that.
*/
if (!vdev->barmap[index]) {
ret = pci_request_selected_regions(pdev,
1 << index, "vfio-pci");
if (ret)
return ret;
vdev->barmap[index] = pci_iomap(pdev, index, 0);
if (!vdev->barmap[index]) {
pci_release_selected_regions(pdev, 1 << index);
return -ENOMEM;
}
}
vma->vm_private_data = vdev;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
vma->vm_pgoff = (pci_resource_start(pdev, index) >> PAGE_SHIFT) + pgoff;
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
req_len, vma->vm_page_prot);
}
static void vfio_pci_request(void *device_data, unsigned int count)
{
struct vfio_pci_device *vdev = device_data;
struct pci_dev *pdev = vdev->pdev;
mutex_lock(&vdev->igate);
if (vdev->req_trigger) {
if (!(count % 10))
pci_notice_ratelimited(pdev,
"Relaying device request to user (#%u)\n",
count);
eventfd_signal(vdev->req_trigger, 1);
} else if (count == 0) {
pci_warn(pdev,
"No device request channel registered, blocked until released by user\n");
}
mutex_unlock(&vdev->igate);
}
static const struct vfio_device_ops vfio_pci_ops = {
.name = "vfio-pci",
.open = vfio_pci_open,
.release = vfio_pci_release,
.ioctl = vfio_pci_ioctl,
.read = vfio_pci_read,
.write = vfio_pci_write,
.mmap = vfio_pci_mmap,
.request = vfio_pci_request,
};
static int vfio_pci_reflck_attach(struct vfio_pci_device *vdev);
static void vfio_pci_reflck_put(struct vfio_pci_reflck *reflck);
static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct vfio_pci_device *vdev;
struct iommu_group *group;
int ret;
if (pdev->hdr_type != PCI_HEADER_TYPE_NORMAL)
return -EINVAL;
/*
* Prevent binding to PFs with VFs enabled, this too easily allows
* userspace instance with VFs and PFs from the same device, which
* cannot work. Disabling SR-IOV here would initiate removing the
* VFs, which would unbind the driver, which is prone to blocking
* if that VF is also in use by vfio-pci. Just reject these PFs
* and let the user sort it out.
*/
if (pci_num_vf(pdev)) {
pci_warn(pdev, "Cannot bind to PF with SR-IOV enabled\n");
return -EBUSY;
}
group = vfio_iommu_group_get(&pdev->dev);
if (!group)
return -EINVAL;
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
vfio_iommu_group_put(group, &pdev->dev);
return -ENOMEM;
}
vdev->pdev = pdev;
vdev->irq_type = VFIO_PCI_NUM_IRQS;
mutex_init(&vdev->igate);
spin_lock_init(&vdev->irqlock);
mutex_init(&vdev->ioeventfds_lock);
INIT_LIST_HEAD(&vdev->ioeventfds_list);
ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
if (ret) {
vfio_iommu_group_put(group, &pdev->dev);
kfree(vdev);
return ret;
}
ret = vfio_pci_reflck_attach(vdev);
if (ret) {
vfio_del_group_dev(&pdev->dev);
vfio_iommu_group_put(group, &pdev->dev);
kfree(vdev);
return ret;
}
if (vfio_pci_is_vga(pdev)) {
vga_client_register(pdev, vdev, NULL, vfio_pci_set_vga_decode);
vga_set_legacy_decoding(pdev,
vfio_pci_set_vga_decode(vdev, false));
}
vfio_pci_probe_power_state(vdev);
if (!disable_idle_d3) {
/*
* pci-core sets the device power state to an unknown value at
* bootup and after being removed from a driver. The only
* transition it allows from this unknown state is to D0, which
* typically happens when a driver calls pci_enable_device().
* We're not ready to enable the device yet, but we do want to
* be able to get to D3. Therefore first do a D0 transition
* before going to D3.
*/
vfio_pci_set_power_state(vdev, PCI_D0);
vfio_pci_set_power_state(vdev, PCI_D3hot);
}
return ret;
}
static void vfio_pci_remove(struct pci_dev *pdev)
{
struct vfio_pci_device *vdev;
vdev = vfio_del_group_dev(&pdev->dev);
if (!vdev)
return;
vfio_pci_reflck_put(vdev->reflck);
vfio_iommu_group_put(pdev->dev.iommu_group, &pdev->dev);
kfree(vdev->region);
mutex_destroy(&vdev->ioeventfds_lock);
if (!disable_idle_d3)
vfio_pci_set_power_state(vdev, PCI_D0);
kfree(vdev->pm_save);
kfree(vdev);
if (vfio_pci_is_vga(pdev)) {
vga_client_register(pdev, NULL, NULL, NULL);
vga_set_legacy_decoding(pdev,
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM);
}
}
static pci_ers_result_t vfio_pci_aer_err_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct vfio_pci_device *vdev;
struct vfio_device *device;
device = vfio_device_get_from_dev(&pdev->dev);
if (device == NULL)
return PCI_ERS_RESULT_DISCONNECT;
vdev = vfio_device_data(device);
if (vdev == NULL) {
vfio_device_put(device);
return PCI_ERS_RESULT_DISCONNECT;
}
mutex_lock(&vdev->igate);
if (vdev->err_trigger)
eventfd_signal(vdev->err_trigger, 1);
mutex_unlock(&vdev->igate);
vfio_device_put(device);
return PCI_ERS_RESULT_CAN_RECOVER;
}
static const struct pci_error_handlers vfio_err_handlers = {
.error_detected = vfio_pci_aer_err_detected,
};
static struct pci_driver vfio_pci_driver = {
.name = "vfio-pci",
.id_table = NULL, /* only dynamic ids */
.probe = vfio_pci_probe,
.remove = vfio_pci_remove,
.err_handler = &vfio_err_handlers,
};
static DEFINE_MUTEX(reflck_lock);
static struct vfio_pci_reflck *vfio_pci_reflck_alloc(void)
{
struct vfio_pci_reflck *reflck;
reflck = kzalloc(sizeof(*reflck), GFP_KERNEL);
if (!reflck)
return ERR_PTR(-ENOMEM);
kref_init(&reflck->kref);
mutex_init(&reflck->lock);
return reflck;
}
static void vfio_pci_reflck_get(struct vfio_pci_reflck *reflck)
{
kref_get(&reflck->kref);
}
static int vfio_pci_reflck_find(struct pci_dev *pdev, void *data)
{
struct vfio_pci_reflck **preflck = data;
struct vfio_device *device;
struct vfio_pci_device *vdev;
device = vfio_device_get_from_dev(&pdev->dev);
if (!device)
return 0;
if (pci_dev_driver(pdev) != &vfio_pci_driver) {
vfio_device_put(device);
return 0;
}
vdev = vfio_device_data(device);
if (vdev->reflck) {
vfio_pci_reflck_get(vdev->reflck);
*preflck = vdev->reflck;
vfio_device_put(device);
return 1;
}
vfio_device_put(device);
return 0;
}
static int vfio_pci_reflck_attach(struct vfio_pci_device *vdev)
{
bool slot = !pci_probe_reset_slot(vdev->pdev->slot);
mutex_lock(&reflck_lock);
if (pci_is_root_bus(vdev->pdev->bus) ||
vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_reflck_find,
&vdev->reflck, slot) <= 0)
vdev->reflck = vfio_pci_reflck_alloc();
mutex_unlock(&reflck_lock);
return PTR_ERR_OR_ZERO(vdev->reflck);
}
static void vfio_pci_reflck_release(struct kref *kref)
{
struct vfio_pci_reflck *reflck = container_of(kref,
struct vfio_pci_reflck,
kref);
kfree(reflck);
mutex_unlock(&reflck_lock);
}
static void vfio_pci_reflck_put(struct vfio_pci_reflck *reflck)
{
kref_put_mutex(&reflck->kref, vfio_pci_reflck_release, &reflck_lock);
}
struct vfio_devices {
struct vfio_device **devices;
int cur_index;
int max_index;
};
static int vfio_pci_get_unused_devs(struct pci_dev *pdev, void *data)
{
struct vfio_devices *devs = data;
struct vfio_device *device;
struct vfio_pci_device *vdev;
if (devs->cur_index == devs->max_index)
return -ENOSPC;
device = vfio_device_get_from_dev(&pdev->dev);
if (!device)
return -EINVAL;
if (pci_dev_driver(pdev) != &vfio_pci_driver) {
vfio_device_put(device);
return -EBUSY;
}
vdev = vfio_device_data(device);
/* Fault if the device is not unused */
if (vdev->refcnt) {
vfio_device_put(device);
return -EBUSY;
}
devs->devices[devs->cur_index++] = device;
return 0;
}
/*
* If a bus or slot reset is available for the provided device and:
* - All of the devices affected by that bus or slot reset are unused
* (!refcnt)
* - At least one of the affected devices is marked dirty via
* needs_reset (such as by lack of FLR support)
* Then attempt to perform that bus or slot reset. Callers are required
* to hold vdev->reflck->lock, protecting the bus/slot reset group from
* concurrent opens. A vfio_device reference is acquired for each device
* to prevent unbinds during the reset operation.
*
* NB: vfio-core considers a group to be viable even if some devices are
* bound to drivers like pci-stub or pcieport. Here we require all devices
* to be bound to vfio_pci since that's the only way we can be sure they
* stay put.
*/
static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev)
{
struct vfio_devices devs = { .cur_index = 0 };
int i = 0, ret = -EINVAL;
bool slot = false;
struct vfio_pci_device *tmp;
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return;
if (vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_count_devs,
&i, slot) || !i)
return;
devs.max_index = i;
devs.devices = kcalloc(i, sizeof(struct vfio_device *), GFP_KERNEL);
if (!devs.devices)
return;
if (vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_get_unused_devs,
&devs, slot))
goto put_devs;
/* Does at least one need a reset? */
for (i = 0; i < devs.cur_index; i++) {
tmp = vfio_device_data(devs.devices[i]);
if (tmp->needs_reset) {
ret = pci_reset_bus(vdev->pdev);
break;
}
}
put_devs:
for (i = 0; i < devs.cur_index; i++) {
tmp = vfio_device_data(devs.devices[i]);
/*
* If reset was successful, affected devices no longer need
* a reset and we should return all the collateral devices
* to low power. If not successful, we either didn't reset
* the bus or timed out waiting for it, so let's not touch
* the power state.
*/
if (!ret) {
tmp->needs_reset = false;
if (tmp != vdev && !disable_idle_d3)
vfio_pci_set_power_state(tmp, PCI_D3hot);
}
vfio_device_put(devs.devices[i]);
}
kfree(devs.devices);
}
static void __exit vfio_pci_cleanup(void)
{
pci_unregister_driver(&vfio_pci_driver);
vfio_pci_uninit_perm_bits();
}
static void __init vfio_pci_fill_ids(void)
{
char *p, *id;
int rc;
/* no ids passed actually */
if (ids[0] == '\0')
return;
/* add ids specified in the module parameter */
p = ids;
while ((id = strsep(&p, ","))) {
unsigned int vendor, device, subvendor = PCI_ANY_ID,
subdevice = PCI_ANY_ID, class = 0, class_mask = 0;
int fields;
if (!strlen(id))
continue;
fields = sscanf(id, "%x:%x:%x:%x:%x:%x",
&vendor, &device, &subvendor, &subdevice,
&class, &class_mask);
if (fields < 2) {
pr_warn("invalid id string \"%s\"\n", id);
continue;
}
rc = pci_add_dynid(&vfio_pci_driver, vendor, device,
subvendor, subdevice, class, class_mask, 0);
if (rc)
vfio/pci: use correct format characters When compiling with -Wformat, clang emits the following warnings: drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Louis Taylor <louis@kragniz.eu> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-04 02:36:20 +08:00
pr_warn("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n",
vendor, device, subvendor, subdevice,
class, class_mask, rc);
else
vfio/pci: use correct format characters When compiling with -Wformat, clang emits the following warnings: drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Louis Taylor <louis@kragniz.eu> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-04 02:36:20 +08:00
pr_info("add [%04x:%04x[%04x:%04x]] class %#08x/%08x\n",
vendor, device, subvendor, subdevice,
class, class_mask);
}
}
static int __init vfio_pci_init(void)
{
int ret;
/* Allocate shared config space permision data used by all devices */
ret = vfio_pci_init_perm_bits();
if (ret)
return ret;
/* Register and scan for devices */
ret = pci_register_driver(&vfio_pci_driver);
if (ret)
goto out_driver;
vfio_pci_fill_ids();
return 0;
out_driver:
vfio_pci_uninit_perm_bits();
return ret;
}
module_init(vfio_pci_init);
module_exit(vfio_pci_cleanup);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);