UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/lib/Makefile

41 lines
1.0 KiB
Makefile
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
#
# Makefile for ppc-specific library files..
#
powerpc: Add configurable -Werror for arch/powerpc Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-10 04:48:51 +08:00
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
powerpc: Build kernel with -mcmodel=medium Finally remove the two level TOC and build with -mcmodel=medium. Unfortunately we can't build modules with -mcmodel=medium due to the tricks the kernel module loader plays with percpu data: # -mcmodel=medium breaks modules because it uses 32bit offsets from # the TOC pointer to create pointers where possible. Pointers into the # percpu data area are created by this method. # # The kernel module loader relocates the percpu data section from the # original location (starting with 0xd...) to somewhere in the base # kernel percpu data space (starting with 0xc...). We need a full # 64bit relocation for this to work, hence -mcmodel=large. On older kernels we fall back to the two level TOC (-mminimal-toc) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-27 01:41:08 +08:00
ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
[POWERPC] Optimise some TOC usage Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:23:54 +08:00
powerpc/ppc32: static ftrace fixes for PPC32 Impact: fix for PowerPC 32 code There were some early init code that was not safe for static ftrace to boot on my PowerBook. This code must only use relative addressing, and static mcount performs a compare of the ftrace_trace_function pointer, and gets that with an absolute address. In the early init boot up code, this will cause a fault. This patch removes tracing from the files containing the offending functions. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 04:54:46 +08:00
CFLAGS_REMOVE_code-patching.o = -pg
CFLAGS_REMOVE_feature-fixups.o = -pg
powerpc/lib: Makefile, consolidate obj-y sections Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-22 12:14:24 +08:00
obj-y += string.o alloc.o crtsavres.o ppc_ksyms.o code-patching.o \
feature-fixups.o
powerpc: Fix module building for gcc 4.5 and 64 bit Gcc 4.5 is now generating out of line register save and restore in the function prefix and postfix when we use -Os. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-30 04:08:42 +08:00
obj-$(CONFIG_PPC32) += div64.o copy_32.o
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
[POWERPC] Create and use CONFIG_WORD_SIZE Linus made this suggestion for the x86 merge and this starts the process for powerpc. We assume that CONFIG_PPC64 implies CONFIG_PPC_MERGE and CONFIG_PPC_STD_MMU_32 implies CONFIG_PPC_STD_MMU. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-21 08:16:20 +08:00
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
powerpc/lib: Do not include string.o in obj-y twice In the Makefile, string.o (which is generated from string.S) is included into the list of objects being built unconditionally (obj-y) in line 12. Additionally, if CONFIG_PPC64 is set, it is included again in line 17. This patch removes the latter unnecessary inclusion. Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-17 19:05:13 +08:00
usercopy_64.o mem_64.o hweight_64.o \
powerpc: Add 64bit optimised memcmp I noticed ksm spending quite a lot of time in memcmp on a large KVM box. The current memcmp loop is very unoptimised - byte at a time compares with no loop unrolling. We can do much much better. Optimise the loop in a few ways: - Unroll the byte at a time loop - For large (at least 32 byte) comparisons that are also 8 byte aligned, use an unrolled modulo scheduled loop using 8 byte loads. This is similar to our glibc memcmp. A simple microbenchmark testing 10000000 iterations of an 8192 byte memcmp was used to measure the performance: baseline: 29.93 s modified: 1.70 s Just over 17x faster. v2: Incorporated some suggestions from Segher: - Use andi. instead of rdlicl. - Convert bdnzt eq, to bdnz. It's just duplicating the earlier compare and was a relic from a previous version. - Don't use cr5, we have plans to use that CR field for fast local atomics. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21 09:27:38 +08:00
copyuser_power7.o string_64.o copypage_power7.o \
memcmp_64.o
powerpc: Use generic checksum code in little endian We need to fix some endian issues in our checksum code. For now just enable the generic checksum routines for little endian builds. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23 10:04:51 +08:00
ifeq ($(CONFIG_GENERIC_CSUM),)
obj-y += checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC64) += checksum_wrappers_64.o
endif
powerpc: Use generic memcpy code in little endian We need to fix some endian issues in our memcpy code. For now just enable the generic memcpy routine for little endian builds. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23 10:04:52 +08:00
obj-$(CONFIG_PPC64) += memcpy_power7.o memcpy_64.o
uprobes/powerpc: Add dependency on single step emulation Uprobes uses emulate_step in sstep.c, but we haven't explicitly specified the dependency. On pseries HAVE_HW_BREAKPOINT protects us, but 44x has no such luxury. Consolidate other users that depend on sstep and create a new config option. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: linuxppc-dev@ozlabs.org Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-07 08:26:57 +08:00
obj-$(CONFIG_PPC_EMULATE_SSTEP) += sstep.o ldstfp.o
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 20:53:37 +08:00
ppc64: use lockc.c from powerpc/lib since it is effectively the same as locks.c from ppc64/lib. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-27 14:45:38 +08:00
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
powerpc: Rename copyuser_power7_vmx.c to vmx-helper.c Subsequent patches will add more VMX library functions and it makes sense to keep all the c-code helper functions in the one file. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-05-30 03:31:24 +08:00
obj-$(CONFIG_ALTIVEC) += vmx-helper.o
ppc64: use lockc.c from powerpc/lib since it is effectively the same as locks.c from ppc64/lib. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-27 14:45:38 +08:00
endif
POWERPC: Move generic cpm2 stuff to powerpc This moves the cpm2 common code and PIC stuff to the powerpc. Most of the files were just copied from ppc/, with minor tuning to make it compile, and, subsequently, work. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-22 02:18:53 +08:00
[POWERPC] rheap: Changes config mechanism Instead of having in the makefile all the option that requires rheap, we define a configuration symbol and when needed we make sure it's selected. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-09-16 18:53:25 +08:00
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
powerpc: Move code patching code into arch/powerpc/lib/code-patching.c We currently have a few routines for patching code in asm/system.h, because they didn't fit anywhere else. I'd like to clean them up a little and add some more, so first move them into a dedicated C file - they don't need to be inlined. While we're moving the code, drop create_function_call(), it's intended caller never got merged and will be replaced in future with something different. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-24 09:32:21 +08:00
powerpc: Add self-tests of the feature fixup code This commit adds tests of the feature fixup code, they are run during boot if CONFIG_FTR_FIXUP_SELFTEST=y. Some of the tests manually invoke the patching routines to check their behaviour, and others use the macros and so are patched during the normal patching done during boot. Because we have two sets of macros with different names, we use a macro to generate the test of the macros, very niiiice. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-24 09:33:03 +08:00
obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o
powerpc: Add VMX optimised xor for RAID5 Add a VMX optimised xor, used primarily for RAID5. On a POWER7 blade this is a decent win: 32regs : 17932.800 MB/sec altivec : 19724.800 MB/sec The bigger gain is when the same test is run in SMT4 mode, as it would if there was a lot of work going on: 8regs : 8377.600 MB/sec altivec : 15801.600 MB/sec I tested this against an array created without the patch, and also verified it worked as expected on a little endian kernel. [ Fix !CONFIG_ALTIVEC build -- BenH ] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-14 18:03:58 +08:00
obj-$(CONFIG_ALTIVEC) += xor_vmx.o
CFLAGS_xor_vmx.o += -maltivec -mabi=altivec