OpenCloudOS-Kernel/sound/soc/codecs/Makefile

726 lines
32 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
snd-soc-88pm860x-objs := 88pm860x-codec.o
snd-soc-ab8500-codec-objs := ab8500-codec.o
snd-soc-ac97-objs := ac97.o
snd-soc-ad1836-objs := ad1836.o
snd-soc-ad193x-objs := ad193x.o
snd-soc-ad193x-spi-objs := ad193x-spi.o
snd-soc-ad193x-i2c-objs := ad193x-i2c.o
snd-soc-ad1980-objs := ad1980.o
snd-soc-ad73311-objs := ad73311.o
snd-soc-adau-utils-objs := adau-utils.o
snd-soc-adau1372-objs := adau1372.o
snd-soc-adau1372-i2c-objs := adau1372-i2c.o
snd-soc-adau1372-spi-objs := adau1372-spi.o
snd-soc-adau1373-objs := adau1373.o
snd-soc-adau1701-objs := adau1701.o
snd-soc-adau17x1-objs := adau17x1.o
snd-soc-adau1761-objs := adau1761.o
snd-soc-adau1761-i2c-objs := adau1761-i2c.o
snd-soc-adau1761-spi-objs := adau1761-spi.o
snd-soc-adau1781-objs := adau1781.o
snd-soc-adau1781-i2c-objs := adau1781-i2c.o
snd-soc-adau1781-spi-objs := adau1781-spi.o
snd-soc-adau1977-objs := adau1977.o
snd-soc-adau1977-spi-objs := adau1977-spi.o
snd-soc-adau1977-i2c-objs := adau1977-i2c.o
snd-soc-adau7002-objs := adau7002.o
snd-soc-adau7118-objs := adau7118.o
snd-soc-adau7118-i2c-objs := adau7118-i2c.o
snd-soc-adau7118-hw-objs := adau7118-hw.o
snd-soc-adav80x-objs := adav80x.o
snd-soc-adav801-objs := adav801.o
snd-soc-adav803-objs := adav803.o
snd-soc-ads117x-objs := ads117x.o
snd-soc-ak4104-objs := ak4104.o
snd-soc-ak4118-objs := ak4118.o
ASoC: Add AK4375 support AK4375 is a 32-bit stereo DAC with headphones amplifier. There's no documentation for it on akm.com, and only a brief datasheet can be found floating on the internets [1]. Thanks to Oriane BAYERD <obayerd@eurocomposant.fr> for finally answering my inquiries through akm.com, if only to tell me that this chip is EOL following AKM factory burning in october 2020 and thus no detailed documentation is available anymore... AK4331 is advertised [2] as pin and register compatible with AK4375 so some scraps of its datasheet were used and this driver might be used as a base for it, but this is totally untested. So this driver is mainly based on downstream code [3] and [4] by Hu Jin from AKM (no known email). Tested on msm8916-alcatel-idol347 and msm8939-alcatel-idol3, which both use PLL driven clock with bypass of SRC (sample rate converter), so only this setup is supported for now. [1] https://datasheetspdf.com/pdf-file/1400317/AKM/AK4375A/1 [2] https://www.akm.com/content/dam/documents/products/audio/audio-dac/ak4331ecb/ak4331ecb-en-datasheet.pdf [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/idol347/ak4375.c [4] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/ak4375.c Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20211220193725.2650356-2-vincent.knecht@mailoo.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-21 03:37:25 +08:00
snd-soc-ak4375-objs := ak4375.o
snd-soc-ak4458-objs := ak4458.o
snd-soc-ak4535-objs := ak4535.o
snd-soc-ak4554-objs := ak4554.o
snd-soc-ak4613-objs := ak4613.o
snd-soc-ak4641-objs := ak4641.o
snd-soc-ak4642-objs := ak4642.o
snd-soc-ak4671-objs := ak4671.o
snd-soc-ak5386-objs := ak5386.o
snd-soc-ak5558-objs := ak5558.o
ASoC: arizona-jack: convert into a helper library for codec drivers Convert the arizona extcon driver into a helper library for direct use from the arizona codec-drivers, rather then being bound to a separate MFD cell. Note the probe (and remove) sequence is split into 2 parts: 1. The arizona_jack_codec_dev_probe() function inits a bunch of jack-detect specific variables in struct arizona_priv and tries to get a number of resources where getting them may fail with -EPROBE_DEFER. 2. Then once the machine driver has create a snd_sock_jack through snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on the codec component, which will call the new arizona_jack_set_jack(), which sets up jack-detection and requests the IRQs. This split is necessary, because the IRQ handlers need access to the arizona->dapm pointer and the snd_sock_jack which are not available when the codec-driver's probe function runs. Note this requires that machine-drivers for codecs which are converted to use the new helper functions from arizona-jack.c are modified to create a snd_soc_jack through snd_soc_card_jack_new() and register this jack with the codec through snd_soc_component_set_jack(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-10-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-07 23:18:03 +08:00
snd-soc-arizona-objs := arizona.o arizona-jack.o
snd-soc-aw8738-objs := aw8738.o
snd-soc-bd28623-objs := bd28623.o
snd-soc-bt-sco-objs := bt-sco.o
snd-soc-cpcap-objs := cpcap.o
snd-soc-cq93vc-objs := cq93vc.o
snd-soc-cros-ec-codec-objs := cros_ec_codec.o
snd-soc-cs35l32-objs := cs35l32.o
snd-soc-cs35l33-objs := cs35l33.o
snd-soc-cs35l34-objs := cs35l34.o
snd-soc-cs35l35-objs := cs35l35.o
snd-soc-cs35l36-objs := cs35l36.o
snd-soc-cs35l41-lib-objs := cs35l41-lib.o
snd-soc-cs35l41-objs := cs35l41.o
snd-soc-cs35l41-spi-objs := cs35l41-spi.o
snd-soc-cs35l41-i2c-objs := cs35l41-i2c.o
snd-soc-cs35l45-tables-objs := cs35l45-tables.o
snd-soc-cs35l45-objs := cs35l45.o
snd-soc-cs35l45-spi-objs := cs35l45-spi.o
snd-soc-cs35l45-i2c-objs := cs35l45-i2c.o
snd-soc-cs42l42-objs := cs42l42.o
snd-soc-cs42l42-i2c-objs := cs42l42-i2c.o
snd-soc-cs42l51-objs := cs42l51.o
snd-soc-cs42l51-i2c-objs := cs42l51-i2c.o
snd-soc-cs42l52-objs := cs42l52.o
snd-soc-cs42l56-objs := cs42l56.o
snd-soc-cs42l73-objs := cs42l73.o
snd-soc-cs42l83-i2c-objs := cs42l83-i2c.o
snd-soc-cs4234-objs := cs4234.o
snd-soc-cs4265-objs := cs4265.o
snd-soc-cs4270-objs := cs4270.o
snd-soc-cs4271-objs := cs4271.o
snd-soc-cs4271-i2c-objs := cs4271-i2c.o
snd-soc-cs4271-spi-objs := cs4271-spi.o
snd-soc-cs42xx8-objs := cs42xx8.o
snd-soc-cs42xx8-i2c-objs := cs42xx8-i2c.o
snd-soc-cs43130-objs := cs43130.o
snd-soc-cs4341-objs := cs4341.o
snd-soc-cs4349-objs := cs4349.o
snd-soc-cs47l15-objs := cs47l15.o
snd-soc-cs47l24-objs := cs47l24.o
snd-soc-cs47l35-objs := cs47l35.o
snd-soc-cs47l85-objs := cs47l85.o
snd-soc-cs47l90-objs := cs47l90.o
snd-soc-cs47l92-objs := cs47l92.o
snd-soc-cs53l30-objs := cs53l30.o
ASoC: Add support for Conexant CX20442-11 voice modem codec This patch adds support for Conexant CX20442-11 voice modem codec, suitable for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related sound card driver will follow. This codec is an optional part of the Conexant SmartV three chip modem design. As such, documentation for its proprietary digital audio interface is not available. However, on Amstrad Delta board, thanks to Mark Underwood who created an initial, omap-alsa based sound driver a few years ago[1], the codec has been discovered to be accessible not only from the modem side, but also over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound card that can access the codec DAI directly. The DAI configuration parameters (sample rate and format, number of channels) has been selected out empirically for best user experience. The codec analogue interface consists of two pairs of analogue I/O pins: speakerphone interface or telephone handset/headset interface. Furthermore, it seams to provide two operation modes for speakerphone I/O: standard and advanced, with automatic gain control and echo cancelation. Even if the codec control interface is unknown and not available, all those interfaces and modes can be selected over the modem chip using V.253 commands. The driver is able to issue necessary commands over a suitable hw_write function if provided by a sound card driver. Otherwise, the codec can be controlled over the modem from userspace while inactive. Even if nothig is known about the codec internal power management capabilities, DAPM widgets has been used to model the codec audio map. Automatically performed powering up/down of those virtual widgets results in corresponding V.253 commands being issued. Some driver features/oddities may be board specific, but I have no way to verify that with any board other than Amstrad Delta. [1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 11:22:28 +08:00
snd-soc-cx20442-objs := cx20442.o
ASoC: Add support for Conexant CX2072X CODEC Initial commit of the Conexant CX2072X CODEC driver. Some features are not present. The CX2072X is a ultra low power stereo audio codec supports I2S/TDM host interface with EQ, DRC features in playback mode. Featues of CX2072X codec: * Two 24 bits DACs and DACs. * Stereo Headphone AMP. * 2.8W per channel class-D output. * Integrated seven bands per channel EQ and DRC. * Fully integrated headset support with detect/switch. * Stereo digital microphone for array applications. * S/PDIF output. * Bi-directional GPIOs. * Support analog and digital PC Beeep. * One headset button support. * Supports a wide variety of host interfaces. -wide variety of I2S and similar bit-stream formats with word lengths of up to 24 bits. -TDM stream supports up to 4 channels. * AEC loopback support. Further fixes by tiwai: * Rebase to 5.2+ * Missing DAPM entry definitions * Missing power hooks * Fix uninitialized variable warning * Rewrite jack detection stuff to use set_jack callback * Plumbing jack detection code for Intel ASoC * Move clk management into runtime PM * Drop incorrect regcache usages * Drop untested stuff: OF table, EQ/DRC handling * Lots of code cleanups and minor refactoring The OF code was dropped due to the lack of testability. It should be easy to re-add once if someone can test it. v1->v2: No change v2->v3: Move register tables to appropriate place Remove some confusing codes Set snd_ctl_boolean_* helpers directly Fix EQ put callback Rename to "DAC1 Switch" from "DAC1 Mute Switch" Drop superfluous regmap calls at shutdown Avoid regmap_register_patch() Add missing register definitions Fix register access on big-endian machine Remove regcache messes v3->v4: Fix the wrong endianess conversion in reg write Minor code cleanups v4->v5: Move clk management to runtime PM Sparse warning fixes Some more code simplification Drop tricky regcache fiddling Apply mutex locks around possible racy sequences Move exported jack detection stuff into set_jack callback v5->v6: Drop buggy&untested EQ and DRC codes Lots of code reduction/cleanup Add more comments about platform-specific stuff Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115531 Signed-off-by: Simon Ho <simon.ho@conexant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-21 14:26:52 +08:00
snd-soc-cx2072x-objs := cx2072x.o
snd-soc-da7210-objs := da7210.o
snd-soc-da7213-objs := da7213.o
snd-soc-da7218-objs := da7218.o
snd-soc-da7219-objs := da7219.o da7219-aad.o
snd-soc-da732x-objs := da732x.o
snd-soc-da9055-objs := da9055.o
snd-soc-dmic-objs := dmic.o
snd-soc-es7134-objs := es7134.o
snd-soc-es7241-objs := es7241.o
snd-soc-es8316-objs := es8316.o
snd-soc-es8326-objs := es8326.o
snd-soc-es8328-objs := es8328.o
snd-soc-es8328-i2c-objs := es8328-i2c.o
snd-soc-es8328-spi-objs := es8328-spi.o
snd-soc-gtm601-objs := gtm601.o
snd-soc-hdac-hdmi-objs := hdac_hdmi.o
snd-soc-hdac-hda-objs := hdac_hda.o
ASoC: codecs: Add HD-Audio codec driver Add generic ASoC equivalent of ALSA HD-Audio codec. This codec is designed to follow HDA_DEV_LEGACY convention. Driver wrapps existing hda_codec.c handlers to prevent code duplication within the newly added code. Number of DAIs created is dependent on capabilities exposed by the codec itself. Because of this, single solution can be applied to support every single HD-Audio codec type. At the same time, through the ASoC topology, platform drivers may limit the number of endpoints available to the userspace as codec driver exposes BE DAIs only. Both hda_codec_probe() and hda_codec_remove() declare their expectations on device's usage_count and suspended-status. This is to catch any unexpected behavior as PM-related code for HD-Audio has been changing quite a bit throughout the years. In order for codec DAI list to reflect its actual PCM capabilities, PCMs need to be built and that can only happen once codec device is constructed. To do that, a valid component->card->snd_card pointer is needed. Said pointer will be provided by the framework once all card components are accounted for and their probing can begin. Usage of "binder" BE DAI solves the problem - codec can be listed as one of HD-Audio card components without declaring any actual BE DAIs statically. Relation with hdac_hda: Addition of parallel solution is motivated by behavioral differences between hdac_hda.c and its legacy equivalent found in sound/pci/hda e.g.: lack of dynamic, based on codec capabilities, resource allocation and high cost of removing such differences on actively used targets. Major goal of codec driver presented here is to follow HD-Audio legacy behavior in 1:1 fashion by becoming a wrapper. Doing so increases code coverage of the legacy code and reduces the maintenance cost for both solutions. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220511162403.3987658-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-12 00:23:51 +08:00
snd-soc-hda-codec-objs := hda.o hda-dai.o
snd-soc-ics43432-objs := ics43432.o
snd-soc-inno-rk3036-objs := inno_rk3036.o
snd-soc-isabelle-objs := isabelle.o
snd-soc-jz4740-codec-objs := jz4740.o
snd-soc-jz4725b-codec-objs := jz4725b.o
snd-soc-jz4760-codec-objs := jz4760.o
snd-soc-jz4770-codec-objs := jz4770.o
snd-soc-l3-objs := l3.o
snd-soc-lm4857-objs := lm4857.o
snd-soc-lm49453-objs := lm49453.o
snd-soc-lochnagar-sc-objs := lochnagar-sc.o
snd-soc-lpass-macro-common-objs := lpass-macro-common.o
snd-soc-lpass-rx-macro-objs := lpass-rx-macro.o
snd-soc-lpass-tx-macro-objs := lpass-tx-macro.o
snd-soc-lpass-wsa-macro-objs := lpass-wsa-macro.o
snd-soc-lpass-va-macro-objs := lpass-va-macro.o
snd-soc-madera-objs := madera.o
snd-soc-max9759-objs := max9759.o
snd-soc-max9768-objs := max9768.o
snd-soc-max98088-objs := max98088.o
snd-soc-max98090-objs := max98090.o
snd-soc-max98095-objs := max98095.o
snd-soc-max98357a-objs := max98357a.o
snd-soc-max98371-objs := max98371.o
snd-soc-max9867-objs := max9867.o
snd-soc-max98925-objs := max98925.o
snd-soc-max98926-objs := max98926.o
snd-soc-max98927-objs := max98927.o
snd-soc-max98520-objs := max98520.o
snd-soc-max98373-objs := max98373.o
snd-soc-max98373-i2c-objs := max98373-i2c.o
snd-soc-max98373-sdw-objs := max98373-sdw.o
snd-soc-max98390-objs := max98390.o
snd-soc-max98396-objs := max98396.o
snd-soc-max9850-objs := max9850.o
snd-soc-max9860-objs := max9860.o
snd-soc-mc13783-objs := mc13783.o
snd-soc-ml26124-objs := ml26124.o
snd-soc-msm8916-analog-objs := msm8916-wcd-analog.o
snd-soc-msm8916-digital-objs := msm8916-wcd-digital.o
snd-soc-mt6351-objs := mt6351.o
snd-soc-mt6358-objs := mt6358.o
snd-soc-mt6359-objs := mt6359.o
snd-soc-mt6359-accdet-objs := mt6359-accdet.o
snd-soc-mt6660-objs := mt6660.o
snd-soc-nau8315-objs := nau8315.o
snd-soc-nau8540-objs := nau8540.o
snd-soc-nau8810-objs := nau8810.o
snd-soc-nau8821-objs := nau8821.o
snd-soc-nau8822-objs := nau8822.o
snd-soc-nau8824-objs := nau8824.o
snd-soc-nau8825-objs := nau8825.o
snd-soc-hdmi-codec-objs := hdmi-codec.o
snd-soc-pcm1681-objs := pcm1681.o
snd-soc-pcm1789-codec-objs := pcm1789.o
snd-soc-pcm1789-i2c-objs := pcm1789-i2c.o
snd-soc-pcm179x-codec-objs := pcm179x.o
snd-soc-pcm179x-i2c-objs := pcm179x-i2c.o
snd-soc-pcm179x-spi-objs := pcm179x-spi.o
snd-soc-pcm186x-objs := pcm186x.o
snd-soc-pcm186x-i2c-objs := pcm186x-i2c.o
snd-soc-pcm186x-spi-objs := pcm186x-spi.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-pcm3060-objs := pcm3060.o
snd-soc-pcm3060-i2c-objs := pcm3060-i2c.o
snd-soc-pcm3060-spi-objs := pcm3060-spi.o
snd-soc-pcm3168a-objs := pcm3168a.o
snd-soc-pcm3168a-i2c-objs := pcm3168a-i2c.o
snd-soc-pcm3168a-spi-objs := pcm3168a-spi.o
snd-soc-pcm5102a-objs := pcm5102a.o
snd-soc-pcm512x-objs := pcm512x.o
snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o
snd-soc-pcm512x-spi-objs := pcm512x-spi.o
snd-soc-rk3328-objs := rk3328_codec.o
snd-soc-rk817-objs := rk817_codec.o
snd-soc-rl6231-objs := rl6231.o
snd-soc-rl6347a-objs := rl6347a.o
snd-soc-rt1011-objs := rt1011.o
snd-soc-rt1015-objs := rt1015.o
snd-soc-rt1015p-objs := rt1015p.o
snd-soc-rt1016-objs := rt1016.o
snd-soc-rt1019-objs := rt1019.o
snd-soc-rt1305-objs := rt1305.o
snd-soc-rt1308-objs := rt1308.o
snd-soc-rt1308-sdw-objs := rt1308-sdw.o
snd-soc-rt1316-sdw-objs := rt1316-sdw.o
snd-soc-rt1318-sdw-objs := rt1318-sdw.o
snd-soc-rt274-objs := rt274.o
snd-soc-rt286-objs := rt286.o
snd-soc-rt298-objs := rt298.o
snd-soc-rt5514-objs := rt5514.o
snd-soc-rt5514-spi-objs := rt5514-spi.o
snd-soc-rt5616-objs := rt5616.o
snd-soc-rt5631-objs := rt5631.o
snd-soc-rt5640-objs := rt5640.o
snd-soc-rt5645-objs := rt5645.o
snd-soc-rt5651-objs := rt5651.o
snd-soc-rt5659-objs := rt5659.o
snd-soc-rt5660-objs := rt5660.o
snd-soc-rt5663-objs := rt5663.o
snd-soc-rt5665-objs := rt5665.o
snd-soc-rt5668-objs := rt5668.o
snd-soc-rt5670-objs := rt5670.o
snd-soc-rt5677-objs := rt5677.o
snd-soc-rt5677-spi-objs := rt5677-spi.o
snd-soc-rt5682-objs := rt5682.o
snd-soc-rt5682-sdw-objs := rt5682-sdw.o
snd-soc-rt5682-i2c-objs := rt5682-i2c.o
snd-soc-rt5682s-objs := rt5682s.o
snd-soc-rt700-objs := rt700.o rt700-sdw.o
snd-soc-rt711-objs := rt711.o rt711-sdw.o
snd-soc-rt711-sdca-objs := rt711-sdca.o rt711-sdca-sdw.o
snd-soc-rt715-objs := rt715.o rt715-sdw.o
snd-soc-rt715-sdca-objs := rt715-sdca.o rt715-sdca-sdw.o
snd-soc-rt9120-objs := rt9120.o
ASoC: codecs: add SoundWire mockup device support To test the host controller and bus management code, it is currently required to have a physical SoundWire peripheral attached to the bus. To help with pre-silicon or early hardware enablement, it would be very useful to have a SoundWire 'mockup' device that is exposed in platform firmware but does not drive any signal on the bus. This is different to the existing ASoC 'dummy' codec uses for I2S/TDM, the SoundWire spec makes it clear that a device that is not attached to the bus is not permitted to interact with the bus, be it for command/control or data. This patch exposes a 'mockup' device, with a minimalist driver, with 4 partID values reserved by Intel for such test configurations. The mockup device exposes one full-duplex DAI based on 2 ports (DP1 for playback and DP8 for capture). The capture data port is just virtual, such a mockup device is prevented by the SoundWire specification from presenting any data generated by a Source port without being Attached. All the callbacks exposed by the SoundWire Slave interface are populated, even if they just return immediately. This is intentional to describe what a minimal codec driver should do and implement and help new codec vendors provide support for their devices. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210714032209.11284-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 11:22:00 +08:00
snd-soc-sdw-mockup-objs := sdw-mockup.o
snd-soc-sgtl5000-objs := sgtl5000.o
snd-soc-alc5623-objs := alc5623.o
snd-soc-alc5632-objs := alc5632.o
snd-soc-sigmadsp-objs := sigmadsp.o
snd-soc-sigmadsp-i2c-objs := sigmadsp-i2c.o
snd-soc-sigmadsp-regmap-objs := sigmadsp-regmap.o
snd-soc-si476x-objs := si476x.o
snd-soc-sma1303-objs := sma1303.o
snd-soc-spdif-tx-objs := spdif_transmitter.o
snd-soc-spdif-rx-objs := spdif_receiver.o
snd-soc-src4xxx-objs := src4xxx.o
snd-soc-src4xxx-i2c-objs := src4xxx-i2c.o
snd-soc-ssm2305-objs := ssm2305.o
snd-soc-ssm2518-objs := ssm2518.o
snd-soc-ssm2602-objs := ssm2602.o
snd-soc-ssm2602-spi-objs := ssm2602-spi.o
snd-soc-ssm2602-i2c-objs := ssm2602-i2c.o
snd-soc-ssm4567-objs := ssm4567.o
snd-soc-sta32x-objs := sta32x.o
snd-soc-sta350-objs := sta350.o
snd-soc-sta529-objs := sta529.o
snd-soc-stac9766-objs := stac9766.o
snd-soc-sti-sas-objs := sti-sas.o
snd-soc-tas5086-objs := tas5086.o
snd-soc-tas571x-objs := tas571x.o
snd-soc-tas5720-objs := tas5720.o
snd-soc-tas5805m-objs := tas5805m.o
snd-soc-tas6424-objs := tas6424.o
snd-soc-tda7419-objs := tda7419.o
snd-soc-tas2770-objs := tas2770.o
snd-soc-tfa9879-objs := tfa9879.o
ASoC: codecs: Add driver for NXP/Goodix TFA989x (TFA1) amplifiers NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers used in many smartphones and tablets. Most of them are sold as "smart amplifiers" with built-in "CoolFlux DSP" that is used for volume control, plus a "sophisticated speaker-boost and protection algorithm". Unfortunately, they are also almost entirely undocumented. The short datasheets (e.g. [1] for TFA9897) describe the available features, but do not provide any information about the registers or how to use the "CoolFlux DSP". The amplifiers are most often configured through proprietary userspace libraries. There are also some (rather complex) kernel drivers (e.g. [2]) but even those rely on obscure firmware blobs for configuration (so-called "containers"). They seem to contain different "profiles" with tuned speaker settings, sample rates and volume steps (which would be better exposed as separate ALSA mixers). The format of the firmware files seems to have changed a lot over the time, so it's not even possible to simply re-use the firmware originally provided by the vendor. Overall, it seems close to impossible to develop a proper mainline driver for these amplifiers that could make proper use of the built-in DSP. This commit implements a compromise: At least the TFA1 family of the TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass* the DSP using a special register sequence. The register sequence can be found in similar variations in the kernel drivers from lots of vendors e.g. in [3] and was probably mainly used for factory testing. With the DSP bypassed, the amplifier acts mostly like a dumb standard speaker amplifier, without (hardware) volume control. However, the setup is much simpler and it works without any obscure firmware. This driver implements the DSP bypass combined with chip-specific initialization sequences adapted from [2]. Only TFA9895 is supported in this initial commit. Except for the lack of volume control I can not hear any difference with or without the DSP, it works just fine. This driver allows the speaker to work on mainline Linux running on the Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897]. TFA9897 support will be added in separate patch set later. [1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78 [2]: https://source.codeaurora.org/external/mas/tfa98xx [3]: https://github.com/sonyxperiadev/kernel/blob/57b5050e340f40a88e1ddb8d16fd9adb44418923/sound/soc/codecs/tfa98xx.c#L1422-L1462 Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-13 18:41:29 +08:00
snd-soc-tfa989x-objs := tfa989x.o
snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o
snd-soc-tlv320aic23-objs := tlv320aic23.o
snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o
snd-soc-tlv320aic26-objs := tlv320aic26.o
snd-soc-tlv320aic31xx-objs := tlv320aic31xx.o
snd-soc-tlv320aic32x4-objs := tlv320aic32x4.o tlv320aic32x4-clk.o
snd-soc-tlv320aic32x4-i2c-objs := tlv320aic32x4-i2c.o
snd-soc-tlv320aic32x4-spi-objs := tlv320aic32x4-spi.o
snd-soc-tlv320aic3x-objs := tlv320aic3x.o
snd-soc-tlv320aic3x-i2c-objs := tlv320aic3x-i2c.o
snd-soc-tlv320aic3x-spi-objs := tlv320aic3x-spi.o
snd-soc-tlv320dac33-objs := tlv320dac33.o
snd-soc-tlv320adcx140-objs := tlv320adcx140.o
snd-soc-tscs42xx-objs := tscs42xx.o
snd-soc-tscs454-objs := tscs454.o
snd-soc-ts3a227e-objs := ts3a227e.o
snd-soc-twl4030-objs := twl4030.o
snd-soc-twl6040-objs := twl6040.o
snd-soc-uda1334-objs := uda1334.o
snd-soc-uda134x-objs := uda134x.o
snd-soc-uda1380-objs := uda1380.o
snd-soc-wcd-mbhc-objs := wcd-mbhc-v2.o
snd-soc-wcd9335-objs := wcd-clsh-v2.o wcd9335.o
snd-soc-wcd934x-objs := wcd-clsh-v2.o wcd934x.o
snd-soc-wcd938x-objs := wcd938x.o wcd-clsh-v2.o
snd-soc-wcd938x-sdw-objs := wcd938x-sdw.o
snd-soc-wl1273-objs := wl1273.o
snd-soc-wm-adsp-objs := wm_adsp.o
snd-soc-wm0010-objs := wm0010.o
snd-soc-wm1250-ev1-objs := wm1250-ev1.o
snd-soc-wm2000-objs := wm2000.o
snd-soc-wm2200-objs := wm2200.o
snd-soc-wm5100-objs := wm5100.o wm5100-tables.o
snd-soc-wm5102-objs := wm5102.o
snd-soc-wm5110-objs := wm5110.o
snd-soc-wm8350-objs := wm8350.o
snd-soc-wm8400-objs := wm8400.o
snd-soc-wm8510-objs := wm8510.o
snd-soc-wm8523-objs := wm8523.o
snd-soc-wm8524-objs := wm8524.o
snd-soc-wm8580-objs := wm8580.o
snd-soc-wm8711-objs := wm8711.o
snd-soc-wm8727-objs := wm8727.o
snd-soc-wm8728-objs := wm8728.o
snd-soc-wm8731-objs := wm8731.o
snd-soc-wm8731-i2c-objs := wm8731-i2c.o
snd-soc-wm8731-spi-objs := wm8731-spi.o
snd-soc-wm8737-objs := wm8737.o
snd-soc-wm8741-objs := wm8741.o
snd-soc-wm8750-objs := wm8750.o
snd-soc-wm8753-objs := wm8753.o
snd-soc-wm8770-objs := wm8770.o
snd-soc-wm8776-objs := wm8776.o
snd-soc-wm8782-objs := wm8782.o
snd-soc-wm8804-objs := wm8804.o
snd-soc-wm8804-i2c-objs := wm8804-i2c.o
snd-soc-wm8804-spi-objs := wm8804-spi.o
snd-soc-wm8900-objs := wm8900.o
snd-soc-wm8903-objs := wm8903.o
snd-soc-wm8904-objs := wm8904.o
snd-soc-wm8996-objs := wm8996.o
snd-soc-wm8940-objs := wm8940.o
snd-soc-wm8955-objs := wm8955.o
snd-soc-wm8960-objs := wm8960.o
snd-soc-wm8961-objs := wm8961.o
snd-soc-wm8962-objs := wm8962.o
snd-soc-wm8971-objs := wm8971.o
snd-soc-wm8974-objs := wm8974.o
snd-soc-wm8978-objs := wm8978.o
snd-soc-wm8983-objs := wm8983.o
snd-soc-wm8985-objs := wm8985.o
snd-soc-wm8988-objs := wm8988.o
snd-soc-wm8990-objs := wm8990.o
snd-soc-wm8991-objs := wm8991.o
snd-soc-wm8993-objs := wm8993.o
snd-soc-wm8994-objs := wm8994.o wm8958-dsp2.o
snd-soc-wm8995-objs := wm8995.o
snd-soc-wm8997-objs := wm8997.o
snd-soc-wm8998-objs := wm8998.o
snd-soc-wm9081-objs := wm9081.o
snd-soc-wm9090-objs := wm9090.o
snd-soc-wm9705-objs := wm9705.o
snd-soc-wm9712-objs := wm9712.o
snd-soc-wm9713-objs := wm9713.o
snd-soc-wm-hubs-objs := wm_hubs.o
snd-soc-wsa881x-objs := wsa881x.o
snd-soc-wsa883x-objs := wsa883x.o
snd-soc-zl38060-objs := zl38060.o
# Amp
snd-soc-max9877-objs := max9877.o
ASoC: max98504: Add max98504 speaker amplifier driver This patch adds driver for the MAX98504 speaker amplifier. The MAX98504 is a high efficiency mono class D amplifier that features an integrated boost converter with voltage and current sensing ADCs for Dynamic Speaker Management. This driver does not include support for the I2S DAI, as we wouldn't be able to test such code in a hardware configuration where the amplifier has only wired the analogue input. Signed-off-by: Inha Song <ideal.song@samsung.com> [k.kozlowski: rebased on 4.1] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [s.nawrocki: removed unused macro definitions, rewrote regulator supply related parts, rewrote regmap configuration code, added support for speaker enable and global chip enable through DAPM, rewritten as component driver, added PDM DAI definition and TDM callbacks for PDM channels configuration] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> -- Changes since v2: - added parsing of the VBAT brownout DT properties, - removed MAX98504_REG_SPEAKER_SOURCE_SELECT register initialization, - removed unused macro definitions. Changes since v1: - none. Changes since initial version: - added regulator supply handling, - added DAPM widges for speaker source selection, - added PDM DAI definition and TDM callbacks for setting up active PDM Tx channels and I/V sense ADC data mapping, - removed all optional DT properties, added regulator supply properties in the DT binding. Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 19:26:37 +08:00
snd-soc-max98504-objs := max98504.o
snd-soc-simple-amplifier-objs := simple-amplifier.o
snd-soc-tpa6130a2-objs := tpa6130a2.o
snd-soc-tas2552-objs := tas2552.o
snd-soc-tas2562-objs := tas2562.o
snd-soc-tas2764-objs := tas2764.o
snd-soc-tas2780-objs := tas2780.o
# Mux
snd-soc-simple-mux-objs := simple-mux.o
obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o
obj-$(CONFIG_SND_SOC_AB8500_CODEC) += snd-soc-ab8500-codec.o
obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o
obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o
obj-$(CONFIG_SND_SOC_AD193X_SPI) += snd-soc-ad193x-spi.o
obj-$(CONFIG_SND_SOC_AD193X_I2C) += snd-soc-ad193x-i2c.o
obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o
obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
obj-$(CONFIG_SND_SOC_ADAU_UTILS) += snd-soc-adau-utils.o
obj-$(CONFIG_SND_SOC_ADAU1372) += snd-soc-adau1372.o
obj-$(CONFIG_SND_SOC_ADAU1372_I2C) += snd-soc-adau1372-i2c.o
obj-$(CONFIG_SND_SOC_ADAU1372_SPI) += snd-soc-adau1372-spi.o
obj-$(CONFIG_SND_SOC_ADAU1373) += snd-soc-adau1373.o
obj-$(CONFIG_SND_SOC_ADAU1701) += snd-soc-adau1701.o
obj-$(CONFIG_SND_SOC_ADAU17X1) += snd-soc-adau17x1.o
obj-$(CONFIG_SND_SOC_ADAU1761) += snd-soc-adau1761.o
obj-$(CONFIG_SND_SOC_ADAU1761_I2C) += snd-soc-adau1761-i2c.o
obj-$(CONFIG_SND_SOC_ADAU1761_SPI) += snd-soc-adau1761-spi.o
obj-$(CONFIG_SND_SOC_ADAU1781) += snd-soc-adau1781.o
obj-$(CONFIG_SND_SOC_ADAU1781_I2C) += snd-soc-adau1781-i2c.o
obj-$(CONFIG_SND_SOC_ADAU1781_SPI) += snd-soc-adau1781-spi.o
obj-$(CONFIG_SND_SOC_ADAU1977) += snd-soc-adau1977.o
obj-$(CONFIG_SND_SOC_ADAU1977_SPI) += snd-soc-adau1977-spi.o
obj-$(CONFIG_SND_SOC_ADAU1977_I2C) += snd-soc-adau1977-i2c.o
obj-$(CONFIG_SND_SOC_ADAU7002) += snd-soc-adau7002.o
obj-$(CONFIG_SND_SOC_ADAU7118) += snd-soc-adau7118.o
obj-$(CONFIG_SND_SOC_ADAU7118_I2C) += snd-soc-adau7118-i2c.o
obj-$(CONFIG_SND_SOC_ADAU7118_HW) += snd-soc-adau7118-hw.o
obj-$(CONFIG_SND_SOC_ADAV80X) += snd-soc-adav80x.o
obj-$(CONFIG_SND_SOC_ADAV801) += snd-soc-adav801.o
obj-$(CONFIG_SND_SOC_ADAV803) += snd-soc-adav803.o
obj-$(CONFIG_SND_SOC_ADS117X) += snd-soc-ads117x.o
obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o
obj-$(CONFIG_SND_SOC_AK4118) += snd-soc-ak4118.o
ASoC: Add AK4375 support AK4375 is a 32-bit stereo DAC with headphones amplifier. There's no documentation for it on akm.com, and only a brief datasheet can be found floating on the internets [1]. Thanks to Oriane BAYERD <obayerd@eurocomposant.fr> for finally answering my inquiries through akm.com, if only to tell me that this chip is EOL following AKM factory burning in october 2020 and thus no detailed documentation is available anymore... AK4331 is advertised [2] as pin and register compatible with AK4375 so some scraps of its datasheet were used and this driver might be used as a base for it, but this is totally untested. So this driver is mainly based on downstream code [3] and [4] by Hu Jin from AKM (no known email). Tested on msm8916-alcatel-idol347 and msm8939-alcatel-idol3, which both use PLL driven clock with bypass of SRC (sample rate converter), so only this setup is supported for now. [1] https://datasheetspdf.com/pdf-file/1400317/AKM/AK4375A/1 [2] https://www.akm.com/content/dam/documents/products/audio/audio-dac/ak4331ecb/ak4331ecb-en-datasheet.pdf [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/idol347/ak4375.c [4] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/ak4375.c Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20211220193725.2650356-2-vincent.knecht@mailoo.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-21 03:37:25 +08:00
obj-$(CONFIG_SND_SOC_AK4375) += snd-soc-ak4375.o
obj-$(CONFIG_SND_SOC_AK4458) += snd-soc-ak4458.o
obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o
obj-$(CONFIG_SND_SOC_AK4554) += snd-soc-ak4554.o
obj-$(CONFIG_SND_SOC_AK4613) += snd-soc-ak4613.o
obj-$(CONFIG_SND_SOC_AK4641) += snd-soc-ak4641.o
obj-$(CONFIG_SND_SOC_AK4642) += snd-soc-ak4642.o
obj-$(CONFIG_SND_SOC_AK4671) += snd-soc-ak4671.o
obj-$(CONFIG_SND_SOC_AK5386) += snd-soc-ak5386.o
obj-$(CONFIG_SND_SOC_AK5558) += snd-soc-ak5558.o
obj-$(CONFIG_SND_SOC_ALC5623) += snd-soc-alc5623.o
obj-$(CONFIG_SND_SOC_ALC5632) += snd-soc-alc5632.o
obj-$(CONFIG_SND_SOC_ARIZONA) += snd-soc-arizona.o
obj-$(CONFIG_SND_SOC_AW8738) += snd-soc-aw8738.o
obj-$(CONFIG_SND_SOC_BD28623) += snd-soc-bd28623.o
obj-$(CONFIG_SND_SOC_BT_SCO) += snd-soc-bt-sco.o
obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
obj-$(CONFIG_SND_SOC_CPCAP) += snd-soc-cpcap.o
obj-$(CONFIG_SND_SOC_CROS_EC_CODEC) += snd-soc-cros-ec-codec.o
obj-$(CONFIG_SND_SOC_CS35L32) += snd-soc-cs35l32.o
obj-$(CONFIG_SND_SOC_CS35L33) += snd-soc-cs35l33.o
obj-$(CONFIG_SND_SOC_CS35L34) += snd-soc-cs35l34.o
obj-$(CONFIG_SND_SOC_CS35L35) += snd-soc-cs35l35.o
obj-$(CONFIG_SND_SOC_CS35L36) += snd-soc-cs35l36.o
obj-$(CONFIG_SND_SOC_CS35L41) += snd-soc-cs35l41.o
obj-$(CONFIG_SND_SOC_CS35L41_LIB) += snd-soc-cs35l41-lib.o
obj-$(CONFIG_SND_SOC_CS35L41_SPI) += snd-soc-cs35l41-spi.o
obj-$(CONFIG_SND_SOC_CS35L41_I2C) += snd-soc-cs35l41-i2c.o
obj-$(CONFIG_SND_SOC_CS35L45_TABLES) += snd-soc-cs35l45-tables.o
obj-$(CONFIG_SND_SOC_CS35L45) += snd-soc-cs35l45.o
obj-$(CONFIG_SND_SOC_CS35L45_SPI) += snd-soc-cs35l45-spi.o
obj-$(CONFIG_SND_SOC_CS35L45_I2C) += snd-soc-cs35l45-i2c.o
obj-$(CONFIG_SND_SOC_CS42L42_CORE) += snd-soc-cs42l42.o
obj-$(CONFIG_SND_SOC_CS42L42) += snd-soc-cs42l42-i2c.o
obj-$(CONFIG_SND_SOC_CS42L51) += snd-soc-cs42l51.o
obj-$(CONFIG_SND_SOC_CS42L51_I2C) += snd-soc-cs42l51-i2c.o
obj-$(CONFIG_SND_SOC_CS42L52) += snd-soc-cs42l52.o
obj-$(CONFIG_SND_SOC_CS42L56) += snd-soc-cs42l56.o
obj-$(CONFIG_SND_SOC_CS42L73) += snd-soc-cs42l73.o
obj-$(CONFIG_SND_SOC_CS42L83) += snd-soc-cs42l83-i2c.o
obj-$(CONFIG_SND_SOC_CS4234) += snd-soc-cs4234.o
obj-$(CONFIG_SND_SOC_CS4265) += snd-soc-cs4265.o
obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o
obj-$(CONFIG_SND_SOC_CS4271) += snd-soc-cs4271.o
obj-$(CONFIG_SND_SOC_CS4271_I2C) += snd-soc-cs4271-i2c.o
obj-$(CONFIG_SND_SOC_CS4271_SPI) += snd-soc-cs4271-spi.o
obj-$(CONFIG_SND_SOC_CS42XX8) += snd-soc-cs42xx8.o
obj-$(CONFIG_SND_SOC_CS42XX8_I2C) += snd-soc-cs42xx8-i2c.o
obj-$(CONFIG_SND_SOC_CS43130) += snd-soc-cs43130.o
obj-$(CONFIG_SND_SOC_CS4341) += snd-soc-cs4341.o
obj-$(CONFIG_SND_SOC_CS4349) += snd-soc-cs4349.o
obj-$(CONFIG_SND_SOC_CS47L24) += snd-soc-cs47l24.o
obj-$(CONFIG_SND_SOC_CS47L15) += snd-soc-cs47l15.o
obj-$(CONFIG_SND_SOC_CS47L35) += snd-soc-cs47l35.o
obj-$(CONFIG_SND_SOC_CS47L85) += snd-soc-cs47l85.o
obj-$(CONFIG_SND_SOC_CS47L90) += snd-soc-cs47l90.o
obj-$(CONFIG_SND_SOC_CS47L92) += snd-soc-cs47l92.o
obj-$(CONFIG_SND_SOC_CS53L30) += snd-soc-cs53l30.o
ASoC: Add support for Conexant CX20442-11 voice modem codec This patch adds support for Conexant CX20442-11 voice modem codec, suitable for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related sound card driver will follow. This codec is an optional part of the Conexant SmartV three chip modem design. As such, documentation for its proprietary digital audio interface is not available. However, on Amstrad Delta board, thanks to Mark Underwood who created an initial, omap-alsa based sound driver a few years ago[1], the codec has been discovered to be accessible not only from the modem side, but also over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound card that can access the codec DAI directly. The DAI configuration parameters (sample rate and format, number of channels) has been selected out empirically for best user experience. The codec analogue interface consists of two pairs of analogue I/O pins: speakerphone interface or telephone handset/headset interface. Furthermore, it seams to provide two operation modes for speakerphone I/O: standard and advanced, with automatic gain control and echo cancelation. Even if the codec control interface is unknown and not available, all those interfaces and modes can be selected over the modem chip using V.253 commands. The driver is able to issue necessary commands over a suitable hw_write function if provided by a sound card driver. Otherwise, the codec can be controlled over the modem from userspace while inactive. Even if nothig is known about the codec internal power management capabilities, DAPM widgets has been used to model the codec audio map. Automatically performed powering up/down of those virtual widgets results in corresponding V.253 commands being issued. Some driver features/oddities may be board specific, but I have no way to verify that with any board other than Amstrad Delta. [1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 11:22:28 +08:00
obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o
ASoC: Add support for Conexant CX2072X CODEC Initial commit of the Conexant CX2072X CODEC driver. Some features are not present. The CX2072X is a ultra low power stereo audio codec supports I2S/TDM host interface with EQ, DRC features in playback mode. Featues of CX2072X codec: * Two 24 bits DACs and DACs. * Stereo Headphone AMP. * 2.8W per channel class-D output. * Integrated seven bands per channel EQ and DRC. * Fully integrated headset support with detect/switch. * Stereo digital microphone for array applications. * S/PDIF output. * Bi-directional GPIOs. * Support analog and digital PC Beeep. * One headset button support. * Supports a wide variety of host interfaces. -wide variety of I2S and similar bit-stream formats with word lengths of up to 24 bits. -TDM stream supports up to 4 channels. * AEC loopback support. Further fixes by tiwai: * Rebase to 5.2+ * Missing DAPM entry definitions * Missing power hooks * Fix uninitialized variable warning * Rewrite jack detection stuff to use set_jack callback * Plumbing jack detection code for Intel ASoC * Move clk management into runtime PM * Drop incorrect regcache usages * Drop untested stuff: OF table, EQ/DRC handling * Lots of code cleanups and minor refactoring The OF code was dropped due to the lack of testability. It should be easy to re-add once if someone can test it. v1->v2: No change v2->v3: Move register tables to appropriate place Remove some confusing codes Set snd_ctl_boolean_* helpers directly Fix EQ put callback Rename to "DAC1 Switch" from "DAC1 Mute Switch" Drop superfluous regmap calls at shutdown Avoid regmap_register_patch() Add missing register definitions Fix register access on big-endian machine Remove regcache messes v3->v4: Fix the wrong endianess conversion in reg write Minor code cleanups v4->v5: Move clk management to runtime PM Sparse warning fixes Some more code simplification Drop tricky regcache fiddling Apply mutex locks around possible racy sequences Move exported jack detection stuff into set_jack callback v5->v6: Drop buggy&untested EQ and DRC codes Lots of code reduction/cleanup Add more comments about platform-specific stuff Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115531 Signed-off-by: Simon Ho <simon.ho@conexant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-21 14:26:52 +08:00
obj-$(CONFIG_SND_SOC_CX2072X) += snd-soc-cx2072x.o
obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o
obj-$(CONFIG_SND_SOC_DA7213) += snd-soc-da7213.o
obj-$(CONFIG_SND_SOC_DA7218) += snd-soc-da7218.o
obj-$(CONFIG_SND_SOC_DA7219) += snd-soc-da7219.o
obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o
obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o
obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o
obj-$(CONFIG_SND_SOC_ES7134) += snd-soc-es7134.o
obj-$(CONFIG_SND_SOC_ES7241) += snd-soc-es7241.o
obj-$(CONFIG_SND_SOC_ES8316) += snd-soc-es8316.o
obj-$(CONFIG_SND_SOC_ES8326) += snd-soc-es8326.o
obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o
obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o
obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o
obj-$(CONFIG_SND_SOC_GTM601) += snd-soc-gtm601.o
obj-$(CONFIG_SND_SOC_HDAC_HDMI) += snd-soc-hdac-hdmi.o
obj-$(CONFIG_SND_SOC_HDAC_HDA) += snd-soc-hdac-hda.o
ASoC: codecs: Add HD-Audio codec driver Add generic ASoC equivalent of ALSA HD-Audio codec. This codec is designed to follow HDA_DEV_LEGACY convention. Driver wrapps existing hda_codec.c handlers to prevent code duplication within the newly added code. Number of DAIs created is dependent on capabilities exposed by the codec itself. Because of this, single solution can be applied to support every single HD-Audio codec type. At the same time, through the ASoC topology, platform drivers may limit the number of endpoints available to the userspace as codec driver exposes BE DAIs only. Both hda_codec_probe() and hda_codec_remove() declare their expectations on device's usage_count and suspended-status. This is to catch any unexpected behavior as PM-related code for HD-Audio has been changing quite a bit throughout the years. In order for codec DAI list to reflect its actual PCM capabilities, PCMs need to be built and that can only happen once codec device is constructed. To do that, a valid component->card->snd_card pointer is needed. Said pointer will be provided by the framework once all card components are accounted for and their probing can begin. Usage of "binder" BE DAI solves the problem - codec can be listed as one of HD-Audio card components without declaring any actual BE DAIs statically. Relation with hdac_hda: Addition of parallel solution is motivated by behavioral differences between hdac_hda.c and its legacy equivalent found in sound/pci/hda e.g.: lack of dynamic, based on codec capabilities, resource allocation and high cost of removing such differences on actively used targets. Major goal of codec driver presented here is to follow HD-Audio legacy behavior in 1:1 fashion by becoming a wrapper. Doing so increases code coverage of the legacy code and reduces the maintenance cost for both solutions. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220511162403.3987658-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-12 00:23:51 +08:00
obj-$(CONFIG_SND_SOC_HDA) += snd-soc-hda-codec.o
obj-$(CONFIG_SND_SOC_ICS43432) += snd-soc-ics43432.o
obj-$(CONFIG_SND_SOC_INNO_RK3036) += snd-soc-inno-rk3036.o
obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o
obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o
obj-$(CONFIG_SND_SOC_JZ4725B_CODEC) += snd-soc-jz4725b-codec.o
obj-$(CONFIG_SND_SOC_JZ4760_CODEC) += snd-soc-jz4760-codec.o
obj-$(CONFIG_SND_SOC_JZ4770_CODEC) += snd-soc-jz4770-codec.o
obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o
obj-$(CONFIG_SND_SOC_LM4857) += snd-soc-lm4857.o
obj-$(CONFIG_SND_SOC_LM49453) += snd-soc-lm49453.o
obj-$(CONFIG_SND_SOC_LOCHNAGAR_SC) += snd-soc-lochnagar-sc.o
obj-$(CONFIG_SND_SOC_MADERA) += snd-soc-madera.o
obj-$(CONFIG_SND_SOC_MAX9759) += snd-soc-max9759.o
obj-$(CONFIG_SND_SOC_MAX9768) += snd-soc-max9768.o
obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o
obj-$(CONFIG_SND_SOC_MAX98090) += snd-soc-max98090.o
obj-$(CONFIG_SND_SOC_MAX98095) += snd-soc-max98095.o
obj-$(CONFIG_SND_SOC_MAX98357A) += snd-soc-max98357a.o
obj-$(CONFIG_SND_SOC_MAX98371) += snd-soc-max98371.o
obj-$(CONFIG_SND_SOC_MAX9867) += snd-soc-max9867.o
obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o
obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o
obj-$(CONFIG_SND_SOC_MAX98520) += snd-soc-max98520.o
obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o
obj-$(CONFIG_SND_SOC_MAX98373_I2C) += snd-soc-max98373-i2c.o
obj-$(CONFIG_SND_SOC_MAX98373_SDW) += snd-soc-max98373-sdw.o
obj-$(CONFIG_SND_SOC_MAX98390) += snd-soc-max98390.o
obj-$(CONFIG_SND_SOC_MAX98396) += snd-soc-max98396.o
obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o
obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
obj-$(CONFIG_SND_SOC_MSM8916_WCD_ANALOG) +=snd-soc-msm8916-analog.o
obj-$(CONFIG_SND_SOC_MSM8916_WCD_DIGITAL) +=snd-soc-msm8916-digital.o
obj-$(CONFIG_SND_SOC_MT6351) += snd-soc-mt6351.o
obj-$(CONFIG_SND_SOC_MT6358) += snd-soc-mt6358.o
obj-$(CONFIG_SND_SOC_MT6359) += snd-soc-mt6359.o
obj-$(CONFIG_SND_SOC_MT6359_ACCDET) += mt6359-accdet.o
obj-$(CONFIG_SND_SOC_MT6660) += snd-soc-mt6660.o
obj-$(CONFIG_SND_SOC_NAU8315) += snd-soc-nau8315.o
obj-$(CONFIG_SND_SOC_NAU8540) += snd-soc-nau8540.o
obj-$(CONFIG_SND_SOC_NAU8810) += snd-soc-nau8810.o
obj-$(CONFIG_SND_SOC_NAU8821) += snd-soc-nau8821.o
obj-$(CONFIG_SND_SOC_NAU8822) += snd-soc-nau8822.o
obj-$(CONFIG_SND_SOC_NAU8824) += snd-soc-nau8824.o
obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o
obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
obj-$(CONFIG_SND_SOC_PCM179X) += snd-soc-pcm179x-codec.o
obj-$(CONFIG_SND_SOC_PCM1789_I2C) += snd-soc-pcm1789-i2c.o
obj-$(CONFIG_SND_SOC_PCM1789) += snd-soc-pcm1789-codec.o
obj-$(CONFIG_SND_SOC_PCM179X_I2C) += snd-soc-pcm179x-i2c.o
obj-$(CONFIG_SND_SOC_PCM179X_SPI) += snd-soc-pcm179x-spi.o
obj-$(CONFIG_SND_SOC_PCM186X) += snd-soc-pcm186x.o
obj-$(CONFIG_SND_SOC_PCM186X_I2C) += snd-soc-pcm186x-i2c.o
obj-$(CONFIG_SND_SOC_PCM186X_SPI) += snd-soc-pcm186x-spi.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_PCM3060) += snd-soc-pcm3060.o
obj-$(CONFIG_SND_SOC_PCM3060_I2C) += snd-soc-pcm3060-i2c.o
obj-$(CONFIG_SND_SOC_PCM3060_SPI) += snd-soc-pcm3060-spi.o
obj-$(CONFIG_SND_SOC_PCM3168A) += snd-soc-pcm3168a.o
obj-$(CONFIG_SND_SOC_PCM3168A_I2C) += snd-soc-pcm3168a-i2c.o
obj-$(CONFIG_SND_SOC_PCM3168A_SPI) += snd-soc-pcm3168a-spi.o
obj-$(CONFIG_SND_SOC_PCM5102A) += snd-soc-pcm5102a.o
obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o
obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o
obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o
obj-$(CONFIG_SND_SOC_RK3328) += snd-soc-rk3328.o
obj-$(CONFIG_SND_SOC_RK817) += snd-soc-rk817.o
obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o
obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o
obj-$(CONFIG_SND_SOC_RT1011) += snd-soc-rt1011.o
obj-$(CONFIG_SND_SOC_RT1015) += snd-soc-rt1015.o
obj-$(CONFIG_SND_SOC_RT1015P) += snd-soc-rt1015p.o
obj-$(CONFIG_SND_SOC_RT1016) += snd-soc-rt1016.o
obj-$(CONFIG_SND_SOC_RT1019) += snd-soc-rt1019.o
obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o
obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o
obj-$(CONFIG_SND_SOC_RT1308_SDW) += snd-soc-rt1308-sdw.o
obj-$(CONFIG_SND_SOC_RT1316_SDW) += snd-soc-rt1316-sdw.o
obj-$(CONFIG_SND_SOC_RT1318_SDW) += snd-soc-rt1318-sdw.o
obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o
obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o
obj-$(CONFIG_SND_SOC_RT298) += snd-soc-rt298.o
obj-$(CONFIG_SND_SOC_RT5514) += snd-soc-rt5514.o
obj-$(CONFIG_SND_SOC_RT5514_SPI) += snd-soc-rt5514-spi.o
obj-$(CONFIG_SND_SOC_RT5514_SPI_BUILTIN) += snd-soc-rt5514-spi.o
obj-$(CONFIG_SND_SOC_RT5616) += snd-soc-rt5616.o
obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o
obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o
obj-$(CONFIG_SND_SOC_RT5645) += snd-soc-rt5645.o
obj-$(CONFIG_SND_SOC_RT5651) += snd-soc-rt5651.o
obj-$(CONFIG_SND_SOC_RT5659) += snd-soc-rt5659.o
obj-$(CONFIG_SND_SOC_RT5660) += snd-soc-rt5660.o
obj-$(CONFIG_SND_SOC_RT5663) += snd-soc-rt5663.o
obj-$(CONFIG_SND_SOC_RT5665) += snd-soc-rt5665.o
obj-$(CONFIG_SND_SOC_RT5668) += snd-soc-rt5668.o
obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o
obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o
obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o
obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o
obj-$(CONFIG_SND_SOC_RT5682_I2C) += snd-soc-rt5682-i2c.o
obj-$(CONFIG_SND_SOC_RT5682_SDW) += snd-soc-rt5682-sdw.o
obj-$(CONFIG_SND_SOC_RT5682S) += snd-soc-rt5682s.o
obj-$(CONFIG_SND_SOC_RT700) += snd-soc-rt700.o
obj-$(CONFIG_SND_SOC_RT711) += snd-soc-rt711.o
obj-$(CONFIG_SND_SOC_RT711_SDCA_SDW) += snd-soc-rt711-sdca.o
obj-$(CONFIG_SND_SOC_RT715) += snd-soc-rt715.o
obj-$(CONFIG_SND_SOC_RT715_SDCA_SDW) += snd-soc-rt715-sdca.o
obj-$(CONFIG_SND_SOC_RT9120) += snd-soc-rt9120.o
ASoC: codecs: add SoundWire mockup device support To test the host controller and bus management code, it is currently required to have a physical SoundWire peripheral attached to the bus. To help with pre-silicon or early hardware enablement, it would be very useful to have a SoundWire 'mockup' device that is exposed in platform firmware but does not drive any signal on the bus. This is different to the existing ASoC 'dummy' codec uses for I2S/TDM, the SoundWire spec makes it clear that a device that is not attached to the bus is not permitted to interact with the bus, be it for command/control or data. This patch exposes a 'mockup' device, with a minimalist driver, with 4 partID values reserved by Intel for such test configurations. The mockup device exposes one full-duplex DAI based on 2 ports (DP1 for playback and DP8 for capture). The capture data port is just virtual, such a mockup device is prevented by the SoundWire specification from presenting any data generated by a Source port without being Attached. All the callbacks exposed by the SoundWire Slave interface are populated, even if they just return immediately. This is intentional to describe what a minimal codec driver should do and implement and help new codec vendors provide support for their devices. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210714032209.11284-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 11:22:00 +08:00
obj-$(CONFIG_SND_SOC_SDW_MOCKUP) += snd-soc-sdw-mockup.o
obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o
obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o
obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o
obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP) += snd-soc-sigmadsp-regmap.o
obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o
obj-$(CONFIG_SND_SOC_SMA1303) += snd-soc-sma1303.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o
obj-$(CONFIG_SND_SOC_SRC4XXX) += snd-soc-src4xxx.o
obj-$(CONFIG_SND_SOC_SRC4XXX_I2C) += snd-soc-src4xxx-i2c.o
obj-$(CONFIG_SND_SOC_SSM2305) += snd-soc-ssm2305.o
obj-$(CONFIG_SND_SOC_SSM2518) += snd-soc-ssm2518.o
obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o
obj-$(CONFIG_SND_SOC_SSM2602_SPI) += snd-soc-ssm2602-spi.o
obj-$(CONFIG_SND_SOC_SSM2602_I2C) += snd-soc-ssm2602-i2c.o
obj-$(CONFIG_SND_SOC_SSM4567) += snd-soc-ssm4567.o
obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o
obj-$(CONFIG_SND_SOC_STA350) += snd-soc-sta350.o
obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o
obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o
obj-$(CONFIG_SND_SOC_STI_SAS) += snd-soc-sti-sas.o
obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o
obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o
obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o
obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o
obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o
obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o
obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o
obj-$(CONFIG_SND_SOC_TAS5805M) += snd-soc-tas5805m.o
obj-$(CONFIG_SND_SOC_TAS6424) += snd-soc-tas6424.o
obj-$(CONFIG_SND_SOC_TDA7419) += snd-soc-tda7419.o
obj-$(CONFIG_SND_SOC_TAS2770) += snd-soc-tas2770.o
obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o
ASoC: codecs: Add driver for NXP/Goodix TFA989x (TFA1) amplifiers NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers used in many smartphones and tablets. Most of them are sold as "smart amplifiers" with built-in "CoolFlux DSP" that is used for volume control, plus a "sophisticated speaker-boost and protection algorithm". Unfortunately, they are also almost entirely undocumented. The short datasheets (e.g. [1] for TFA9897) describe the available features, but do not provide any information about the registers or how to use the "CoolFlux DSP". The amplifiers are most often configured through proprietary userspace libraries. There are also some (rather complex) kernel drivers (e.g. [2]) but even those rely on obscure firmware blobs for configuration (so-called "containers"). They seem to contain different "profiles" with tuned speaker settings, sample rates and volume steps (which would be better exposed as separate ALSA mixers). The format of the firmware files seems to have changed a lot over the time, so it's not even possible to simply re-use the firmware originally provided by the vendor. Overall, it seems close to impossible to develop a proper mainline driver for these amplifiers that could make proper use of the built-in DSP. This commit implements a compromise: At least the TFA1 family of the TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass* the DSP using a special register sequence. The register sequence can be found in similar variations in the kernel drivers from lots of vendors e.g. in [3] and was probably mainly used for factory testing. With the DSP bypassed, the amplifier acts mostly like a dumb standard speaker amplifier, without (hardware) volume control. However, the setup is much simpler and it works without any obscure firmware. This driver implements the DSP bypass combined with chip-specific initialization sequences adapted from [2]. Only TFA9895 is supported in this initial commit. Except for the lack of volume control I can not hear any difference with or without the DSP, it works just fine. This driver allows the speaker to work on mainline Linux running on the Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897]. TFA9897 support will be added in separate patch set later. [1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78 [2]: https://source.codeaurora.org/external/mas/tfa98xx [3]: https://github.com/sonyxperiadev/kernel/blob/57b5050e340f40a88e1ddb8d16fd9adb44418923/sound/soc/codecs/tfa98xx.c#L1422-L1462 Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-13 18:41:29 +08:00
obj-$(CONFIG_SND_SOC_TFA989X) += snd-soc-tfa989x.o
obj-$(CONFIG_SND_SOC_TLV320ADC3XXX) += snd-soc-tlv320adc3xxx.o
obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o
obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o
obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o
obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o
obj-$(CONFIG_SND_SOC_TLV320AIC31XX) += snd-soc-tlv320aic31xx.o
obj-$(CONFIG_SND_SOC_TLV320AIC32X4) += snd-soc-tlv320aic32x4.o
obj-$(CONFIG_SND_SOC_TLV320AIC32X4_I2C) += snd-soc-tlv320aic32x4-i2c.o
obj-$(CONFIG_SND_SOC_TLV320AIC32X4_SPI) += snd-soc-tlv320aic32x4-spi.o
obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o
obj-$(CONFIG_SND_SOC_TLV320AIC3X_I2C) += snd-soc-tlv320aic3x-i2c.o
obj-$(CONFIG_SND_SOC_TLV320AIC3X_SPI) += snd-soc-tlv320aic3x-spi.o
obj-$(CONFIG_SND_SOC_TLV320DAC33) += snd-soc-tlv320dac33.o
obj-$(CONFIG_SND_SOC_TLV320ADCX140) += snd-soc-tlv320adcx140.o
obj-$(CONFIG_SND_SOC_TSCS42XX) += snd-soc-tscs42xx.o
obj-$(CONFIG_SND_SOC_TSCS454) += snd-soc-tscs454.o
obj-$(CONFIG_SND_SOC_TS3A227E) += snd-soc-ts3a227e.o
obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o
obj-$(CONFIG_SND_SOC_TWL6040) += snd-soc-twl6040.o
obj-$(CONFIG_SND_SOC_UDA1334) += snd-soc-uda1334.o
obj-$(CONFIG_SND_SOC_UDA134X) += snd-soc-uda134x.o
obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o
obj-$(CONFIG_SND_SOC_WCD_MBHC) += snd-soc-wcd-mbhc.o
obj-$(CONFIG_SND_SOC_WCD9335) += snd-soc-wcd9335.o
obj-$(CONFIG_SND_SOC_WCD934X) += snd-soc-wcd934x.o
obj-$(CONFIG_SND_SOC_WCD938X) += snd-soc-wcd938x.o
ASoC: codecs: wcd938x: fix wcd module dependency With SND_SOC_ALL_CODECS=y and SND_SOC_WCD938X_SDW=m, there is a link error from a reverse dependency, since the built-in codec driver calls into the modular soundwire back-end: x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_codec_free': wcd938x.c:(.text+0x2c0): undefined reference to `wcd938x_sdw_free' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_codec_hw_params': wcd938x.c:(.text+0x2f6): undefined reference to `wcd938x_sdw_hw_params' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_codec_set_sdw_stream': wcd938x.c:(.text+0x332): undefined reference to `wcd938x_sdw_set_sdw_stream' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_tx_swr_ctrl': wcd938x.c:(.text+0x23de): undefined reference to `wcd938x_swr_get_current_bank' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_bind': wcd938x.c:(.text+0x2579): undefined reference to `wcd938x_sdw_device_get' x86_64-linux-ld: wcd938x.c:(.text+0x25a1): undefined reference to `wcd938x_sdw_device_get' x86_64-linux-ld: wcd938x.c:(.text+0x262a): undefined reference to `__devm_regmap_init_sdw' Work around this using two small hacks: An added Kconfig dependency prevents the main driver from being built-in when soundwire support itself is a loadable module to allow calling devm_regmap_init_sdw(), and a Makefile trick links the wcd938x-sdw backend as built-in if needed to solve the dependency between the two modules. Fixes: 045442228868 ("ASoC: codecs: wcd938x: add audio routing and Kconfig") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210721150510.1837221-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-21 23:04:45 +08:00
ifdef CONFIG_SND_SOC_WCD938X_SDW
# avoid link failure by forcing sdw code built-in when needed
obj-$(CONFIG_SND_SOC_WCD938X) += snd-soc-wcd938x-sdw.o
endif
obj-$(CONFIG_SND_SOC_WL1273) += snd-soc-wl1273.o
obj-$(CONFIG_SND_SOC_WM0010) += snd-soc-wm0010.o
obj-$(CONFIG_SND_SOC_WM1250_EV1) += snd-soc-wm1250-ev1.o
obj-$(CONFIG_SND_SOC_WM2000) += snd-soc-wm2000.o
obj-$(CONFIG_SND_SOC_WM2200) += snd-soc-wm2200.o
obj-$(CONFIG_SND_SOC_WM5100) += snd-soc-wm5100.o
obj-$(CONFIG_SND_SOC_WM5102) += snd-soc-wm5102.o
obj-$(CONFIG_SND_SOC_WM5110) += snd-soc-wm5110.o
obj-$(CONFIG_SND_SOC_WM8350) += snd-soc-wm8350.o
obj-$(CONFIG_SND_SOC_WM8400) += snd-soc-wm8400.o
obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o
obj-$(CONFIG_SND_SOC_WM8523) += snd-soc-wm8523.o
obj-$(CONFIG_SND_SOC_WM8524) += snd-soc-wm8524.o
obj-$(CONFIG_SND_SOC_WM8580) += snd-soc-wm8580.o
obj-$(CONFIG_SND_SOC_WM8711) += snd-soc-wm8711.o
obj-$(CONFIG_SND_SOC_WM8727) += snd-soc-wm8727.o
obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o
obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o
obj-$(CONFIG_SND_SOC_WM8731_I2C) += snd-soc-wm8731-i2c.o
obj-$(CONFIG_SND_SOC_WM8731_SPI) += snd-soc-wm8731-spi.o
obj-$(CONFIG_SND_SOC_WM8737) += snd-soc-wm8737.o
obj-$(CONFIG_SND_SOC_WM8741) += snd-soc-wm8741.o
obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o
obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o
obj-$(CONFIG_SND_SOC_WM8770) += snd-soc-wm8770.o
obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o
obj-$(CONFIG_SND_SOC_WM8782) += snd-soc-wm8782.o
obj-$(CONFIG_SND_SOC_WM8804) += snd-soc-wm8804.o
obj-$(CONFIG_SND_SOC_WM8804_I2C) += snd-soc-wm8804-i2c.o
obj-$(CONFIG_SND_SOC_WM8804_SPI) += snd-soc-wm8804-spi.o
obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
obj-$(CONFIG_SND_SOC_WM8904) += snd-soc-wm8904.o
obj-$(CONFIG_SND_SOC_WM8996) += snd-soc-wm8996.o
obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o
obj-$(CONFIG_SND_SOC_WM8955) += snd-soc-wm8955.o
obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o
obj-$(CONFIG_SND_SOC_WM8961) += snd-soc-wm8961.o
obj-$(CONFIG_SND_SOC_WM8962) += snd-soc-wm8962.o
obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
obj-$(CONFIG_SND_SOC_WM8974) += snd-soc-wm8974.o
obj-$(CONFIG_SND_SOC_WM8978) += snd-soc-wm8978.o
obj-$(CONFIG_SND_SOC_WM8983) += snd-soc-wm8983.o
obj-$(CONFIG_SND_SOC_WM8985) += snd-soc-wm8985.o
obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o
obj-$(CONFIG_SND_SOC_WM8993) += snd-soc-wm8993.o
obj-$(CONFIG_SND_SOC_WM8994) += snd-soc-wm8994.o
obj-$(CONFIG_SND_SOC_WM8995) += snd-soc-wm8995.o
obj-$(CONFIG_SND_SOC_WM8997) += snd-soc-wm8997.o
obj-$(CONFIG_SND_SOC_WM8998) += snd-soc-wm8998.o
obj-$(CONFIG_SND_SOC_WM9081) += snd-soc-wm9081.o
obj-$(CONFIG_SND_SOC_WM9090) += snd-soc-wm9090.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
obj-$(CONFIG_SND_SOC_WM_ADSP) += snd-soc-wm-adsp.o
obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
obj-$(CONFIG_SND_SOC_WSA881X) += snd-soc-wsa881x.o
obj-$(CONFIG_SND_SOC_WSA883X) += snd-soc-wsa883x.o
obj-$(CONFIG_SND_SOC_ZL38060) += snd-soc-zl38060.o
# Amp
obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o
ASoC: max98504: Add max98504 speaker amplifier driver This patch adds driver for the MAX98504 speaker amplifier. The MAX98504 is a high efficiency mono class D amplifier that features an integrated boost converter with voltage and current sensing ADCs for Dynamic Speaker Management. This driver does not include support for the I2S DAI, as we wouldn't be able to test such code in a hardware configuration where the amplifier has only wired the analogue input. Signed-off-by: Inha Song <ideal.song@samsung.com> [k.kozlowski: rebased on 4.1] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [s.nawrocki: removed unused macro definitions, rewrote regulator supply related parts, rewrote regmap configuration code, added support for speaker enable and global chip enable through DAPM, rewritten as component driver, added PDM DAI definition and TDM callbacks for PDM channels configuration] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> -- Changes since v2: - added parsing of the VBAT brownout DT properties, - removed MAX98504_REG_SPEAKER_SOURCE_SELECT register initialization, - removed unused macro definitions. Changes since v1: - none. Changes since initial version: - added regulator supply handling, - added DAPM widges for speaker source selection, - added PDM DAI definition and TDM callbacks for setting up active PDM Tx channels and I/V sense ADC data mapping, - removed all optional DT properties, added regulator supply properties in the DT binding. Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 19:26:37 +08:00
obj-$(CONFIG_SND_SOC_MAX98504) += snd-soc-max98504.o
obj-$(CONFIG_SND_SOC_SIMPLE_AMPLIFIER) += snd-soc-simple-amplifier.o
obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o
obj-$(CONFIG_SND_SOC_LPASS_MACRO_COMMON) += snd-soc-lpass-macro-common.o
obj-$(CONFIG_SND_SOC_LPASS_WSA_MACRO) += snd-soc-lpass-wsa-macro.o
obj-$(CONFIG_SND_SOC_LPASS_VA_MACRO) += snd-soc-lpass-va-macro.o
obj-$(CONFIG_SND_SOC_LPASS_RX_MACRO) += snd-soc-lpass-rx-macro.o
obj-$(CONFIG_SND_SOC_LPASS_TX_MACRO) += snd-soc-lpass-tx-macro.o
# Mux
obj-$(CONFIG_SND_SOC_SIMPLE_MUX) += snd-soc-simple-mux.o