OpenCloudOS-Kernel/arch/arm/kernel/module.c

538 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/kernel/module.c
*
* Copyright (C) 2002 Russell King.
* Modified for nommu by Hyok S. Choi
*
* Module allocation method suggested by Andi Kleen.
*/
#include <linux/module.h>
#include <linux/moduleloader.h>
#include <linux/kernel.h>
2008-07-24 12:28:13 +08:00
#include <linux/mm.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/string.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <asm/sections.h>
#include <asm/smp_plat.h>
#include <asm/unwind.h>
#include <asm/opcodes.h>
#ifdef CONFIG_XIP_KERNEL
/*
* The XIP kernel text is mapped in the module area for modules and
* some other stuff to work without any indirect relocations.
* MODULES_VADDR is redefined here and not in asm/memory.h to avoid
* recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
*/
#undef MODULES_VADDR
#define MODULES_VADDR (((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK)
#endif
#ifdef CONFIG_MMU
void *module_alloc(unsigned long size)
{
gfp_t gfp_mask = GFP_KERNEL;
void *p;
/* Silence the initial allocation */
if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS))
gfp_mask |= __GFP_NOWARN;
p = __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
gfp_mask, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
__builtin_return_address(0));
if (!IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || p)
return p;
return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END,
mm: vmalloc: pass additional vm_flags to __vmalloc_node_range() For instrumenting global variables KASan will shadow memory backing memory for modules. So on module loading we will need to allocate memory for shadow and map it at address in shadow that corresponds to the address allocated in module_alloc(). __vmalloc_node_range() could be used for this purpose, except it puts a guard hole after allocated area. Guard hole in shadow memory should be a problem because at some future point we might need to have a shadow memory at address occupied by guard hole. So we could fail to allocate shadow for module_alloc(). Now we have VM_NO_GUARD flag disabling guard page, so we need to pass into __vmalloc_node_range(). Add new parameter 'vm_flags' to __vmalloc_node_range() function. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14 06:40:07 +08:00
GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
__builtin_return_address(0));
}
#endif
bool module_init_section(const char *name)
{
return strstarts(name, ".init") ||
strstarts(name, ".ARM.extab.init") ||
strstarts(name, ".ARM.exidx.init");
}
bool module_exit_section(const char *name)
{
return strstarts(name, ".exit") ||
strstarts(name, ".ARM.extab.exit") ||
strstarts(name, ".ARM.exidx.exit");
}
#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
/*
* This implements the partitioning algorithm for group relocations as
* documented in the ARM AArch32 ELF psABI (IHI 0044).
*
* A single PC-relative symbol reference is divided in up to 3 add or subtract
* operations, where the final one could be incorporated into a load/store
* instruction with immediate offset. E.g.,
*
* ADD Rd, PC, #... or ADD Rd, PC, #...
* ADD Rd, Rd, #... ADD Rd, Rd, #...
* LDR Rd, [Rd, #...] ADD Rd, Rd, #...
*
* The latter has a guaranteed range of only 16 MiB (3x8 == 24 bits), so it is
* of limited use in the kernel. However, the ADD/ADD/LDR combo has a range of
* -/+ 256 MiB, (2x8 + 12 == 28 bits), which means it has sufficient range for
* any in-kernel symbol reference (unless module PLTs are being used).
*
* The main advantage of this approach over the typical pattern using a literal
* load is that literal loads may miss in the D-cache, and generally lead to
* lower cache efficiency for variables that are referenced often from many
* different places in the code.
*/
static u32 get_group_rem(u32 group, u32 *offset)
{
u32 val = *offset;
u32 shift;
do {
shift = val ? (31 - __fls(val)) & ~1 : 32;
*offset = val;
if (!val)
break;
val &= 0xffffff >> shift;
} while (group--);
return shift;
}
#endif
int
apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
unsigned int relindex, struct module *module)
{
Elf32_Shdr *symsec = sechdrs + symindex;
Elf32_Shdr *relsec = sechdrs + relindex;
Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
Elf32_Rel *rel = (void *)relsec->sh_addr;
unsigned int i;
for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
unsigned long loc;
Elf32_Sym *sym;
const char *symname;
#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
u32 shift, group = 1;
#endif
s32 offset;
u32 tmp;
#ifdef CONFIG_THUMB2_KERNEL
u32 upper, lower, sign, j1, j2;
#endif
offset = ELF32_R_SYM(rel->r_info);
if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
pr_err("%s: section %u reloc %u: bad relocation sym offset\n",
module->name, relindex, i);
return -ENOEXEC;
}
sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
symname = strtab + sym->st_name;
if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) {
pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n",
module->name, relindex, i, symname,
rel->r_offset, dstsec->sh_size);
return -ENOEXEC;
}
loc = dstsec->sh_addr + rel->r_offset;
switch (ELF32_R_TYPE(rel->r_info)) {
case R_ARM_NONE:
/* ignore */
break;
case R_ARM_ABS32:
case R_ARM_TARGET1:
*(u32 *)loc += sym->st_value;
break;
case R_ARM_PC24:
case R_ARM_CALL:
case R_ARM_JUMP24:
if (sym->st_value & 3) {
pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (ARM -> Thumb)\n",
module->name, relindex, i, symname);
return -ENOEXEC;
}
offset = __mem_to_opcode_arm(*(u32 *)loc);
offset = (offset & 0x00ffffff) << 2;
if (offset & 0x02000000)
offset -= 0x04000000;
offset += sym->st_value - loc;
/*
* Route through a PLT entry if 'offset' exceeds the
* supported range. Note that 'offset + loc + 8'
* contains the absolute jump target, i.e.,
* @sym + addend, corrected for the +8 PC bias.
*/
if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) &&
(offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000))
offset = get_module_plt(module, loc,
offset + loc + 8)
- loc - 8;
if (offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
module->name, relindex, i, symname,
ELF32_R_TYPE(rel->r_info), loc,
sym->st_value);
return -ENOEXEC;
}
offset >>= 2;
offset &= 0x00ffffff;
*(u32 *)loc &= __opcode_to_mem_arm(0xff000000);
*(u32 *)loc |= __opcode_to_mem_arm(offset);
break;
case R_ARM_V4BX:
/* Preserve Rm and the condition code. Alter
* other bits to re-code instruction as
* MOV PC,Rm.
*/
*(u32 *)loc &= __opcode_to_mem_arm(0xf000000f);
*(u32 *)loc |= __opcode_to_mem_arm(0x01a0f000);
break;
case R_ARM_PREL31:
offset = (*(s32 *)loc << 1) >> 1; /* sign extend */
offset += sym->st_value - loc;
if (offset >= 0x40000000 || offset < -0x40000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
module->name, relindex, i, symname,
ELF32_R_TYPE(rel->r_info), loc,
sym->st_value);
return -ENOEXEC;
}
*(u32 *)loc &= 0x80000000;
*(u32 *)loc |= offset & 0x7fffffff;
break;
case R_ARM_REL32:
*(u32 *)loc += sym->st_value - loc;
break;
case R_ARM_MOVW_ABS_NC:
case R_ARM_MOVT_ABS:
case R_ARM_MOVW_PREL_NC:
case R_ARM_MOVT_PREL:
offset = tmp = __mem_to_opcode_arm(*(u32 *)loc);
offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL ||
ELF32_R_TYPE(rel->r_info) == R_ARM_MOVW_PREL_NC)
offset -= loc;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS ||
ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL)
offset >>= 16;
tmp &= 0xfff0f000;
tmp |= ((offset & 0xf000) << 4) |
(offset & 0x0fff);
*(u32 *)loc = __opcode_to_mem_arm(tmp);
break;
#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
case R_ARM_ALU_PC_G0_NC:
group = 0;
fallthrough;
case R_ARM_ALU_PC_G1_NC:
tmp = __mem_to_opcode_arm(*(u32 *)loc);
offset = ror32(tmp & 0xff, (tmp & 0xf00) >> 7);
if (tmp & BIT(22))
offset = -offset;
offset += sym->st_value - loc;
if (offset < 0) {
offset = -offset;
tmp = (tmp & ~BIT(23)) | BIT(22); // SUB opcode
} else {
tmp = (tmp & ~BIT(22)) | BIT(23); // ADD opcode
}
shift = get_group_rem(group, &offset);
if (shift < 24) {
offset >>= 24 - shift;
offset |= (shift + 8) << 7;
}
*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
break;
case R_ARM_LDR_PC_G2:
tmp = __mem_to_opcode_arm(*(u32 *)loc);
offset = tmp & 0xfff;
if (~tmp & BIT(23)) // U bit cleared?
offset = -offset;
offset += sym->st_value - loc;
if (offset < 0) {
offset = -offset;
tmp &= ~BIT(23); // clear U bit
} else {
tmp |= BIT(23); // set U bit
}
get_group_rem(2, &offset);
if (offset > 0xfff) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
module->name, relindex, i, symname,
ELF32_R_TYPE(rel->r_info), loc,
sym->st_value);
return -ENOEXEC;
}
*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
break;
#endif
#ifdef CONFIG_THUMB2_KERNEL
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
/*
* For function symbols, only Thumb addresses are
* allowed (no interworking).
*
* For non-function symbols, the destination
* has no specific ARM/Thumb disposition, so
* the branch is resolved under the assumption
* that interworking is not required.
*/
if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC &&
!(sym->st_value & 1)) {
pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (Thumb -> ARM)\n",
module->name, relindex, i, symname);
return -ENOEXEC;
}
upper = __mem_to_opcode_thumb16(*(u16 *)loc);
lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
/*
* 25 bit signed address range (Thumb-2 BL and B.W
* instructions):
* S:I1:I2:imm10:imm11:0
* where:
* S = upper[10] = offset[24]
* I1 = ~(J1 ^ S) = offset[23]
* I2 = ~(J2 ^ S) = offset[22]
* imm10 = upper[9:0] = offset[21:12]
* imm11 = lower[10:0] = offset[11:1]
* J1 = lower[13]
* J2 = lower[11]
*/
sign = (upper >> 10) & 1;
j1 = (lower >> 13) & 1;
j2 = (lower >> 11) & 1;
offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
((~(j2 ^ sign) & 1) << 22) |
((upper & 0x03ff) << 12) |
((lower & 0x07ff) << 1);
if (offset & 0x01000000)
offset -= 0x02000000;
offset += sym->st_value - loc;
/*
* Route through a PLT entry if 'offset' exceeds the
* supported range.
*/
if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) &&
(offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000))
offset = get_module_plt(module, loc,
offset + loc + 4)
- loc - 4;
if (offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
module->name, relindex, i, symname,
ELF32_R_TYPE(rel->r_info), loc,
sym->st_value);
return -ENOEXEC;
}
sign = (offset >> 24) & 1;
j1 = sign ^ (~(offset >> 23) & 1);
j2 = sign ^ (~(offset >> 22) & 1);
upper = (u16)((upper & 0xf800) | (sign << 10) |
((offset >> 12) & 0x03ff));
lower = (u16)((lower & 0xd000) |
(j1 << 13) | (j2 << 11) |
((offset >> 1) & 0x07ff));
*(u16 *)loc = __opcode_to_mem_thumb16(upper);
*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
break;
case R_ARM_THM_MOVW_ABS_NC:
case R_ARM_THM_MOVT_ABS:
case R_ARM_THM_MOVW_PREL_NC:
case R_ARM_THM_MOVT_PREL:
upper = __mem_to_opcode_thumb16(*(u16 *)loc);
lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
/*
* MOVT/MOVW instructions encoding in Thumb-2:
*
* i = upper[10]
* imm4 = upper[3:0]
* imm3 = lower[14:12]
* imm8 = lower[7:0]
*
* imm16 = imm4:i:imm3:imm8
*/
offset = ((upper & 0x000f) << 12) |
((upper & 0x0400) << 1) |
((lower & 0x7000) >> 4) | (lower & 0x00ff);
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL ||
ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVW_PREL_NC)
offset -= loc;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS ||
ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL)
offset >>= 16;
upper = (u16)((upper & 0xfbf0) |
((offset & 0xf000) >> 12) |
((offset & 0x0800) >> 1));
lower = (u16)((lower & 0x8f00) |
((offset & 0x0700) << 4) |
(offset & 0x00ff));
*(u16 *)loc = __opcode_to_mem_thumb16(upper);
*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
break;
#endif
default:
pr_err("%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
return -ENOEXEC;
}
}
return 0;
}
struct mod_unwind_map {
const Elf_Shdr *unw_sec;
const Elf_Shdr *txt_sec;
};
static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
const Elf_Shdr *sechdrs, const char *name)
{
const Elf_Shdr *s, *se;
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++)
if (strcmp(name, secstrs + s->sh_name) == 0)
return s;
return NULL;
}
ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching This idea came from Nicolas, Eric Miao produced an initial version, which was then rewritten into this. Patch the physical to virtual translations at runtime. As we modify the code, this makes it incompatible with XIP kernels, but allows us to achieve this with minimal loss of performance. As many translations are of the form: physical = virtual + (PHYS_OFFSET - PAGE_OFFSET) virtual = physical - (PHYS_OFFSET - PAGE_OFFSET) we generate an 'add' instruction for __virt_to_phys(), and a 'sub' instruction for __phys_to_virt(). We calculate at run time (PHYS_OFFSET - PAGE_OFFSET) by comparing the address prior to MMU initialization with where it should be once the MMU has been initialized, and place this constant into the above add/sub instructions. Once we have (PHYS_OFFSET - PAGE_OFFSET), we can calculate the real PHYS_OFFSET as PAGE_OFFSET is a build-time constant, and save this for the C-mode PHYS_OFFSET variable definition to use. At present, we are unable to support Realview with Sparsemem enabled as this uses a complex mapping function, and MSM as this requires a constant which will not fit in our math instruction. Add a module version magic string for this feature to prevent incompatible modules being loaded. Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05 03:09:43 +08:00
extern void fixup_pv_table(const void *, unsigned long);
extern void fixup_smp(const void *, unsigned long);
int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *mod)
{
ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching This idea came from Nicolas, Eric Miao produced an initial version, which was then rewritten into this. Patch the physical to virtual translations at runtime. As we modify the code, this makes it incompatible with XIP kernels, but allows us to achieve this with minimal loss of performance. As many translations are of the form: physical = virtual + (PHYS_OFFSET - PAGE_OFFSET) virtual = physical - (PHYS_OFFSET - PAGE_OFFSET) we generate an 'add' instruction for __virt_to_phys(), and a 'sub' instruction for __phys_to_virt(). We calculate at run time (PHYS_OFFSET - PAGE_OFFSET) by comparing the address prior to MMU initialization with where it should be once the MMU has been initialized, and place this constant into the above add/sub instructions. Once we have (PHYS_OFFSET - PAGE_OFFSET), we can calculate the real PHYS_OFFSET as PAGE_OFFSET is a build-time constant, and save this for the C-mode PHYS_OFFSET variable definition to use. At present, we are unable to support Realview with Sparsemem enabled as this uses a complex mapping function, and MSM as this requires a constant which will not fit in our math instruction. Add a module version magic string for this feature to prevent incompatible modules being loaded. Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05 03:09:43 +08:00
const Elf_Shdr *s = NULL;
#ifdef CONFIG_ARM_UNWIND
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
struct mod_unwind_map maps[ARM_SEC_MAX];
int i;
memset(maps, 0, sizeof(maps));
for (s = sechdrs; s < sechdrs_end; s++) {
const char *secname = secstrs + s->sh_name;
if (!(s->sh_flags & SHF_ALLOC))
continue;
if (strcmp(".ARM.exidx.init.text", secname) == 0)
maps[ARM_SEC_INIT].unw_sec = s;
else if (strcmp(".ARM.exidx", secname) == 0)
maps[ARM_SEC_CORE].unw_sec = s;
else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
maps[ARM_SEC_EXIT].unw_sec = s;
else if (strcmp(".ARM.exidx.text.unlikely", secname) == 0)
maps[ARM_SEC_UNLIKELY].unw_sec = s;
else if (strcmp(".ARM.exidx.text.hot", secname) == 0)
maps[ARM_SEC_HOT].unw_sec = s;
else if (strcmp(".init.text", secname) == 0)
maps[ARM_SEC_INIT].txt_sec = s;
else if (strcmp(".text", secname) == 0)
maps[ARM_SEC_CORE].txt_sec = s;
else if (strcmp(".exit.text", secname) == 0)
maps[ARM_SEC_EXIT].txt_sec = s;
else if (strcmp(".text.unlikely", secname) == 0)
maps[ARM_SEC_UNLIKELY].txt_sec = s;
else if (strcmp(".text.hot", secname) == 0)
maps[ARM_SEC_HOT].txt_sec = s;
}
for (i = 0; i < ARM_SEC_MAX; i++)
if (maps[i].unw_sec && maps[i].txt_sec)
mod->arch.unwind[i] =
unwind_table_add(maps[i].unw_sec->sh_addr,
maps[i].unw_sec->sh_size,
maps[i].txt_sec->sh_addr,
maps[i].txt_sec->sh_size);
ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching This idea came from Nicolas, Eric Miao produced an initial version, which was then rewritten into this. Patch the physical to virtual translations at runtime. As we modify the code, this makes it incompatible with XIP kernels, but allows us to achieve this with minimal loss of performance. As many translations are of the form: physical = virtual + (PHYS_OFFSET - PAGE_OFFSET) virtual = physical - (PHYS_OFFSET - PAGE_OFFSET) we generate an 'add' instruction for __virt_to_phys(), and a 'sub' instruction for __phys_to_virt(). We calculate at run time (PHYS_OFFSET - PAGE_OFFSET) by comparing the address prior to MMU initialization with where it should be once the MMU has been initialized, and place this constant into the above add/sub instructions. Once we have (PHYS_OFFSET - PAGE_OFFSET), we can calculate the real PHYS_OFFSET as PAGE_OFFSET is a build-time constant, and save this for the C-mode PHYS_OFFSET variable definition to use. At present, we are unable to support Realview with Sparsemem enabled as this uses a complex mapping function, and MSM as this requires a constant which will not fit in our math instruction. Add a module version magic string for this feature to prevent incompatible modules being loaded. Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05 03:09:43 +08:00
#endif
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
s = find_mod_section(hdr, sechdrs, ".pv_table");
if (s)
fixup_pv_table((void *)s->sh_addr, s->sh_size);
#endif
s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
if (s && !is_smp())
#ifdef CONFIG_SMP_ON_UP
fixup_smp((void *)s->sh_addr, s->sh_size);
#else
return -EINVAL;
#endif
return 0;
}
void
module_arch_cleanup(struct module *mod)
{
#ifdef CONFIG_ARM_UNWIND
int i;
for (i = 0; i < ARM_SEC_MAX; i++) {
unwind_table_del(mod->arch.unwind[i]);
mod->arch.unwind[i] = NULL;
}
#endif
}
void __weak module_arch_freeing_init(struct module *mod)
{
#ifdef CONFIG_ARM_UNWIND
unwind_table_del(mod->arch.unwind[ARM_SEC_INIT]);
mod->arch.unwind[ARM_SEC_INIT] = NULL;
#endif
}