OpenCloudOS-Kernel/drivers/ata/sata_sil24.c

1228 lines
33 KiB
C
Raw Normal View History

/*
* sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
*
* Copyright 2005 Tejun Heo
*
* Based on preview driver from Silicon Image.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
#define DRV_NAME "sata_sil24"
#define DRV_VERSION "0.3"
/*
* Port request block (PRB) 32 bytes
*/
struct sil24_prb {
__le16 ctrl;
__le16 prot;
__le32 rx_cnt;
u8 fis[6 * 4];
};
/*
* Scatter gather entry (SGE) 16 bytes
*/
struct sil24_sge {
__le64 addr;
__le32 cnt;
__le32 flags;
};
/*
* Port multiplier
*/
struct sil24_port_multiplier {
__le32 diag;
__le32 sactive;
};
enum {
/*
* Global controller registers (128 bytes @ BAR0)
*/
/* 32 bit regs */
HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
HOST_CTRL = 0x40,
HOST_IRQ_STAT = 0x44,
HOST_PHY_CFG = 0x48,
HOST_BIST_CTRL = 0x50,
HOST_BIST_PTRN = 0x54,
HOST_BIST_STAT = 0x58,
HOST_MEM_BIST_STAT = 0x5c,
HOST_FLASH_CMD = 0x70,
/* 8 bit regs */
HOST_FLASH_DATA = 0x74,
HOST_TRANSITION_DETECT = 0x75,
HOST_GPIO_CTRL = 0x76,
HOST_I2C_ADDR = 0x78, /* 32 bit */
HOST_I2C_DATA = 0x7c,
HOST_I2C_XFER_CNT = 0x7e,
HOST_I2C_CTRL = 0x7f,
/* HOST_SLOT_STAT bits */
HOST_SSTAT_ATTN = (1 << 31),
/* HOST_CTRL bits */
HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */
HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */
HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */
/*
* Port registers
* (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
*/
PORT_REGS_SIZE = 0x2000,
PORT_LRAM = 0x0000, /* 31 LRAM slots and PM regs */
PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
/* 32 bit regs */
PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
PORT_ACTIVATE_UPPER_ADDR= 0x101c,
PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
PORT_CMD_ERR = 0x1024, /* command error number */
PORT_FIS_CFG = 0x1028,
PORT_FIFO_THRES = 0x102c,
/* 16 bit regs */
PORT_DECODE_ERR_CNT = 0x1040,
PORT_DECODE_ERR_THRESH = 0x1042,
PORT_CRC_ERR_CNT = 0x1044,
PORT_CRC_ERR_THRESH = 0x1046,
PORT_HSHK_ERR_CNT = 0x1048,
PORT_HSHK_ERR_THRESH = 0x104a,
/* 32 bit regs */
PORT_PHY_CFG = 0x1050,
PORT_SLOT_STAT = 0x1800,
PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
PORT_SCONTROL = 0x1f00,
PORT_SSTATUS = 0x1f04,
PORT_SERROR = 0x1f08,
PORT_SACTIVE = 0x1f0c,
/* PORT_CTRL_STAT bits */
PORT_CS_PORT_RST = (1 << 0), /* port reset */
PORT_CS_DEV_RST = (1 << 1), /* device reset */
PORT_CS_INIT = (1 << 2), /* port initialize */
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
PORT_CS_RESUME = (1 << 6), /* port resume */
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
/* PORT_IRQ_STAT/ENABLE_SET/CLR */
/* bits[11:0] are masked */
PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
PORT_IRQ_ERROR = (1 << 1), /* command execution error */
PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */
PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */
PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */
PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */
PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
PORT_IRQ_UNK_FIS,
/* bits[27:16] are unmasked (raw) */
PORT_IRQ_RAW_SHIFT = 16,
PORT_IRQ_MASKED_MASK = 0x7ff,
PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
PORT_IRQ_STEER_SHIFT = 30,
PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
/* PORT_CMD_ERR constants */
PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
/* bits of PRB control field */
PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
/* PRB protocol field */
PRB_PROT_PACKET = (1 << 0),
PRB_PROT_TCQ = (1 << 1),
PRB_PROT_NCQ = (1 << 2),
PRB_PROT_READ = (1 << 3),
PRB_PROT_WRITE = (1 << 4),
PRB_PROT_TRANSPARENT = (1 << 5),
/*
* Other constants
*/
SGE_TRM = (1 << 31), /* Last SGE in chain */
SGE_LNK = (1 << 30), /* linked list
Points to SGT, not SGE */
SGE_DRD = (1 << 29), /* discard data read (/dev/null)
data address ignored */
SIL24_MAX_CMDS = 31,
/* board id */
BID_SIL3124 = 0,
BID_SIL3132 = 1,
BID_SIL3131 = 2,
/* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
};
struct sil24_ata_block {
struct sil24_prb prb;
struct sil24_sge sge[LIBATA_MAX_PRD];
};
struct sil24_atapi_block {
struct sil24_prb prb;
u8 cdb[16];
struct sil24_sge sge[LIBATA_MAX_PRD - 1];
};
union sil24_cmd_block {
struct sil24_ata_block ata;
struct sil24_atapi_block atapi;
};
static struct sil24_cerr_info {
unsigned int err_mask, action;
const char *desc;
} sil24_cerr_db[] = {
[0] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
"device error" },
[PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
"device error via D2H FIS" },
[PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
"device error via SDB FIS" },
[PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
"error in data FIS" },
[PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
"failed to transmit command FIS" },
[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
"protocol mismatch" },
[PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
"data directon mismatch" },
[PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
"ran out of SGEs while writing" },
[PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
"ran out of SGEs while reading" },
[PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
"invalid data directon for ATAPI CDB" },
[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
"SGT no on qword boundary" },
[PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI target abort while fetching SGT" },
[PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI master abort while fetching SGT" },
[PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI parity error while fetching SGT" },
[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
"PRB not on qword boundary" },
[PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI target abort while fetching PRB" },
[PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI master abort while fetching PRB" },
[PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI parity error while fetching PRB" },
[PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"undefined error while transferring data" },
[PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI target abort while transferring data" },
[PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI master abort while transferring data" },
[PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI parity error while transferring data" },
[PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
"FIS received while sending service FIS" },
};
/*
* ap->private_data
*
* The preview driver always returned 0 for status. We emulate it
* here from the previous interrupt.
*/
struct sil24_port_priv {
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
struct ata_taskfile tf; /* Cached taskfile registers */
};
/* ap->host->private_data */
struct sil24_host_priv {
void __iomem *host_base; /* global controller control (128 bytes @BAR0) */
void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
static u8 sil24_check_status(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap);
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
static void sil24_freeze(struct ata_port *ap);
static void sil24_thaw(struct ata_port *ap);
static void sil24_error_handler(struct ata_port *ap);
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
static int sil24_port_start(struct ata_port *ap);
static void sil24_port_stop(struct ata_port *ap);
static void sil24_host_stop(struct ata_host *host);
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
static int sil24_pci_device_resume(struct pci_dev *pdev);
#endif
static const struct pci_device_id sil24_pci_tbl[] = {
{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
{ 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
{ 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
{ 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
{ 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
{ } /* terminate list */
};
static struct pci_driver sil24_pci_driver = {
.name = DRV_NAME,
.id_table = sil24_pci_tbl,
.probe = sil24_init_one,
.remove = ata_pci_remove_one, /* safe? */
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = sil24_pci_device_resume,
#endif
};
static struct scsi_host_template sil24_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.change_queue_depth = ata_scsi_change_queue_depth,
.can_queue = SIL24_MAX_CMDS,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
};
static const struct ata_port_operations sil24_ops = {
.port_disable = ata_port_disable,
.dev_config = sil24_dev_config,
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
.dev_select = ata_noop_dev_select,
.tf_read = sil24_tf_read,
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
.irq_handler = sil24_interrupt,
.irq_clear = sil24_irq_clear,
.scr_read = sil24_scr_read,
.scr_write = sil24_scr_write,
.freeze = sil24_freeze,
.thaw = sil24_thaw,
.error_handler = sil24_error_handler,
.post_internal_cmd = sil24_post_internal_cmd,
.port_start = sil24_port_start,
.port_stop = sil24_port_stop,
.host_stop = sil24_host_stop,
};
/*
* Use bits 30-31 of port_flags to encode available port numbers.
* Current maxium is 4.
*/
#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
static struct ata_port_info sil24_port_info[] = {
/* sil_3124 */
{
.sht = &sil24_sht,
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
SIL24_FLAG_PCIX_IRQ_WOC,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil24_ops,
},
/* sil_3132 */
{
.sht = &sil24_sht,
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil24_ops,
},
/* sil_3131/sil_3531 */
{
.sht = &sil24_sht,
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil24_ops,
},
};
static int sil24_tag(int tag)
{
if (unlikely(ata_tag_internal(tag)))
return 0;
return tag;
}
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
if (dev->cdb_len == 16)
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
else
writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
}
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_prb __iomem *prb = port;
u8 fis[6 * 4];
memcpy_fromio(fis, prb->fis, 6 * 4);
ata_tf_from_fis(fis, &pp->tf);
}
static u8 sil24_check_status(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
return pp->tf.command;
}
static int sil24_scr_map[] = {
[SCR_CONTROL] = 0,
[SCR_STATUS] = 1,
[SCR_ERROR] = 2,
[SCR_ACTIVE] = 3,
};
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
{
void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
}
return 0xffffffffU;
}
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
}
}
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct sil24_port_priv *pp = ap->private_data;
*tf = pp->tf;
}
static int sil24_init_port(struct ata_port *ap)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 tmp;
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
ata_wait_register(port + PORT_CTRL_STAT,
PORT_CS_INIT, PORT_CS_INIT, 10, 100);
tmp = ata_wait_register(port + PORT_CTRL_STAT,
PORT_CS_RDY, 0, 10, 100);
if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY)
return -EIO;
return 0;
}
static int sil24_softreset(struct ata_port *ap, unsigned int *class)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
u32 mask, irq_stat;
const char *reason;
DPRINTK("ENTER\n");
if (ata_port_offline(ap)) {
DPRINTK("PHY reports no device\n");
*class = ATA_DEV_NONE;
goto out;
}
/* put the port into known state */
if (sil24_init_port(ap)) {
reason ="port not ready";
goto err;
}
/* do SRST */
prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
prb->fis[1] = 0; /* no PM yet */
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0,
100, ATA_TMOUT_BOOT / HZ * 1000);
writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */
irq_stat >>= PORT_IRQ_RAW_SHIFT;
if (!(irq_stat & PORT_IRQ_COMPLETE)) {
if (irq_stat & PORT_IRQ_ERROR)
reason = "SRST command error";
else
reason = "timeout";
goto err;
}
sil24_update_tf(ap);
*class = ata_dev_classify(&pp->tf);
if (*class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
out:
DPRINTK("EXIT, class=%u\n", *class);
return 0;
err:
ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
return -EIO;
}
static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
const char *reason;
int tout_msec, rc;
u32 tmp;
/* sil24 does the right thing(tm) without any protection */
sata_set_spd(ap);
tout_msec = 100;
if (ata_port_online(ap))
tout_msec = 5000;
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
tmp = ata_wait_register(port + PORT_CTRL_STAT,
PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec);
/* SStatus oscillates between zero and valid status after
* DEV_RST, debounce it.
*/
rc = sata_phy_debounce(ap, sata_deb_timing_long);
if (rc) {
reason = "PHY debouncing failed";
goto err;
}
if (tmp & PORT_CS_DEV_RST) {
if (ata_port_offline(ap))
return 0;
reason = "link not ready";
goto err;
}
/* Sil24 doesn't store signature FIS after hardreset, so we
* can't wait for BSY to clear. Some devices take a long time
* to get ready and those devices will choke if we don't wait
* for BSY clearance here. Tell libata to perform follow-up
* softreset.
*/
return -EAGAIN;
err:
ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason);
return -EIO;
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_sge *sge)
{
struct scatterlist *sg;
unsigned int idx = 0;
ata_for_each_sg(sg, qc) {
sge->addr = cpu_to_le64(sg_dma_address(sg));
sge->cnt = cpu_to_le32(sg_dma_len(sg));
if (ata_sg_is_last(sg, qc))
sge->flags = cpu_to_le32(SGE_TRM);
else
sge->flags = 0;
sge++;
idx++;
}
}
static void sil24_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
union sil24_cmd_block *cb;
struct sil24_prb *prb;
struct sil24_sge *sge;
u16 ctrl = 0;
cb = &pp->cmd_block[sil24_tag(qc->tag)];
switch (qc->tf.protocol) {
case ATA_PROT_PIO:
case ATA_PROT_DMA:
case ATA_PROT_NCQ:
case ATA_PROT_NODATA:
prb = &cb->ata.prb;
sge = cb->ata.sge;
break;
case ATA_PROT_ATAPI:
case ATA_PROT_ATAPI_DMA:
case ATA_PROT_ATAPI_NODATA:
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
memset(cb->atapi.cdb, 0, 32);
memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
ctrl = PRB_CTRL_PACKET_WRITE;
else
ctrl = PRB_CTRL_PACKET_READ;
}
break;
default:
prb = NULL; /* shut up, gcc */
sge = NULL;
BUG();
}
prb->ctrl = cpu_to_le16(ctrl);
ata_tf_to_fis(&qc->tf, prb->fis, 0);
if (qc->flags & ATA_QCFLAG_DMAMAP)
sil24_fill_sg(qc, sge);
}
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
unsigned int tag = sil24_tag(qc->tag);
dma_addr_t paddr;
void __iomem *activate;
paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
activate = port + PORT_CMD_ACTIVATE + tag * 8;
writel((u32)paddr, activate);
writel((u64)paddr >> 32, activate + 4);
return 0;
}
static void sil24_irq_clear(struct ata_port *ap)
{
/* unused */
}
static void sil24_freeze(struct ata_port *ap)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
* PORT_IRQ_ENABLE instead.
*/
writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
}
static void sil24_thaw(struct ata_port *ap)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 tmp;
/* clear IRQ */
tmp = readl(port + PORT_IRQ_STAT);
writel(tmp, port + PORT_IRQ_STAT);
/* turn IRQ back on */
writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
}
static void sil24_error_intr(struct ata_port *ap)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct ata_eh_info *ehi = &ap->eh_info;
int freeze = 0;
u32 irq_stat;
/* on error, we need to clear IRQ explicitly */
irq_stat = readl(port + PORT_IRQ_STAT);
writel(irq_stat, port + PORT_IRQ_STAT);
/* first, analyze and record host port events */
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
ata_ehi_hotplugged(ehi);
ata_ehi_push_desc(ehi, ", %s",
irq_stat & PORT_IRQ_PHYRDY_CHG ?
"PHY RDY changed" : "device exchanged");
freeze = 1;
}
if (irq_stat & PORT_IRQ_UNK_FIS) {
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_ehi_push_desc(ehi , ", unknown FIS");
freeze = 1;
}
/* deal with command error */
if (irq_stat & PORT_IRQ_ERROR) {
struct sil24_cerr_info *ci = NULL;
unsigned int err_mask = 0, action = 0;
struct ata_queued_cmd *qc;
u32 cerr;
/* analyze CMD_ERR */
cerr = readl(port + PORT_CMD_ERR);
if (cerr < ARRAY_SIZE(sil24_cerr_db))
ci = &sil24_cerr_db[cerr];
if (ci && ci->desc) {
err_mask |= ci->err_mask;
action |= ci->action;
ata_ehi_push_desc(ehi, ", %s", ci->desc);
} else {
err_mask |= AC_ERR_OTHER;
action |= ATA_EH_SOFTRESET;
ata_ehi_push_desc(ehi, ", unknown command error %d",
cerr);
}
/* record error info */
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc) {
sil24_update_tf(ap);
qc->err_mask |= err_mask;
} else
ehi->err_mask |= err_mask;
ehi->action |= action;
}
/* freeze or abort */
if (freeze)
ata_port_freeze(ap);
else
ata_port_abort(ap);
}
static void sil24_finish_qc(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_RESULT_TF)
sil24_update_tf(qc->ap);
}
static inline void sil24_host_intr(struct ata_port *ap)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 slot_stat, qc_active;
int rc;
slot_stat = readl(port + PORT_SLOT_STAT);
if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
sil24_error_intr(ap);
return;
}
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
qc_active = slot_stat & ~HOST_SSTAT_ATTN;
rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
if (rc > 0)
return;
if (rc < 0) {
struct ata_eh_info *ehi = &ap->eh_info;
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_port_freeze(ap);
return;
}
if (ata_ratelimit())
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
slot_stat, ap->active_tag, ap->sactive);
}
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ata_host *host = dev_instance;
struct sil24_host_priv *hpriv = host->private_data;
unsigned handled = 0;
u32 status;
int i;
status = readl(hpriv->host_base + HOST_IRQ_STAT);
if (status == 0xffffffff) {
printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
"PCI fault or device removal?\n");
goto out;
}
if (!(status & IRQ_STAT_4PORTS))
goto out;
spin_lock(&host->lock);
for (i = 0; i < host->n_ports; i++)
if (status & (1 << i)) {
struct ata_port *ap = host->ports[i];
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
sil24_host_intr(host->ports[i]);
handled++;
} else
printk(KERN_ERR DRV_NAME
": interrupt from disabled port %d\n", i);
}
spin_unlock(&host->lock);
out:
return IRQ_RETVAL(handled);
}
static void sil24_error_handler(struct ata_port *ap)
{
struct ata_eh_context *ehc = &ap->eh_context;
if (sil24_init_port(ap)) {
ata_eh_freeze_port(ap);
ehc->i.action |= ATA_EH_HARDRESET;
}
/* perform recovery */
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:27:48 +08:00
ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
ata_std_postreset);
}
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
if (qc->flags & ATA_QCFLAG_FAILED)
qc->err_mask |= AC_ERR_OTHER;
/* make DMA engine forget about the failed command */
if (qc->err_mask)
sil24_init_port(ap);
}
static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev)
{
const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS;
dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
}
static int sil24_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct sil24_port_priv *pp;
union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
dma_addr_t cb_dma;
int rc = -ENOMEM;
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
goto err_out;
pp->tf.command = ATA_DRDY;
cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
if (!cb)
goto err_out_pp;
memset(cb, 0, cb_size);
rc = ata_pad_alloc(ap, dev);
if (rc)
goto err_out_pad;
pp->cmd_block = cb;
pp->cmd_block_dma = cb_dma;
ap->private_data = pp;
return 0;
err_out_pad:
sil24_cblk_free(pp, dev);
err_out_pp:
kfree(pp);
err_out:
return rc;
}
static void sil24_port_stop(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct sil24_port_priv *pp = ap->private_data;
sil24_cblk_free(pp, dev);
ata_pad_free(ap, dev);
kfree(pp);
}
static void sil24_host_stop(struct ata_host *host)
{
struct sil24_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
pci_iounmap(pdev, hpriv->host_base);
pci_iounmap(pdev, hpriv->port_base);
kfree(hpriv);
}
static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
unsigned long port_flags,
void __iomem *host_base,
void __iomem *port_base)
{
u32 tmp;
int i;
/* GPIO off */
writel(0, host_base + HOST_FLASH_CMD);
/* clear global reset & mask interrupts during initialization */
writel(0, host_base + HOST_CTRL);
/* init ports */
for (i = 0; i < n_ports; i++) {
void __iomem *port = port_base + i * PORT_REGS_SIZE;
/* Initial PHY setting */
writel(0x20c, port + PORT_PHY_CFG);
/* Clear port RST */
tmp = readl(port + PORT_CTRL_STAT);
if (tmp & PORT_CS_PORT_RST) {
writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
tmp = ata_wait_register(port + PORT_CTRL_STAT,
PORT_CS_PORT_RST,
PORT_CS_PORT_RST, 10, 100);
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, &pdev->dev,
"failed to clear port RST\n");
}
/* Configure IRQ WoC */
if (port_flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
else
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
/* Zero error counters. */
writel(0x8000, port + PORT_DECODE_ERR_THRESH);
writel(0x8000, port + PORT_CRC_ERR_THRESH);
writel(0x8000, port + PORT_HSHK_ERR_THRESH);
writel(0x0000, port + PORT_DECODE_ERR_CNT);
writel(0x0000, port + PORT_CRC_ERR_CNT);
writel(0x0000, port + PORT_HSHK_ERR_CNT);
/* Always use 64bit activation */
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
/* Clear port multiplier enable and resume bits */
writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
}
/* Turn on interrupts */
writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
}
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
unsigned int board_id = (unsigned int)ent->driver_data;
struct ata_port_info *pinfo = &sil24_port_info[board_id];
struct ata_probe_ent *probe_ent = NULL;
struct sil24_host_priv *hpriv = NULL;
void __iomem *host_base = NULL;
void __iomem *port_base = NULL;
int i, rc;
u32 tmp;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
if (rc)
goto out_disable;
rc = -ENOMEM;
/* map mmio registers */
host_base = pci_iomap(pdev, 0, 0);
if (!host_base)
goto out_free;
port_base = pci_iomap(pdev, 2, 0);
if (!port_base)
goto out_free;
/* allocate & init probe_ent and hpriv */
probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent)
goto out_free;
hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
goto out_free;
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->sht = pinfo->sht;
probe_ent->port_flags = pinfo->flags;
probe_ent->pio_mask = pinfo->pio_mask;
probe_ent->mwdma_mask = pinfo->mwdma_mask;
probe_ent->udma_mask = pinfo->udma_mask;
probe_ent->port_ops = pinfo->port_ops;
probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->flags);
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
probe_ent->private_data = hpriv;
hpriv->host_base = host_base;
hpriv->port_base = port_base;
/*
* Configure the device
*/
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"64-bit DMA enable failed\n");
goto out_free;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
goto out_free;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
goto out_free;
}
}
/* Apply workaround for completion IRQ loss on PCI-X errata */
if (probe_ent->port_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
tmp = readl(host_base + HOST_CTRL);
if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
dev_printk(KERN_INFO, &pdev->dev,
"Applying completion IRQ loss on PCI-X "
"errata fix\n");
else
probe_ent->port_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
}
for (i = 0; i < probe_ent->n_ports; i++) {
unsigned long portu =
(unsigned long)port_base + i * PORT_REGS_SIZE;
probe_ent->port[i].cmd_addr = portu;
probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
ata_std_ports(&probe_ent->port[i]);
}
sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
host_base, port_base);
pci_set_master(pdev);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
kfree(probe_ent);
return 0;
out_free:
if (host_base)
pci_iounmap(pdev, host_base);
if (port_base)
pci_iounmap(pdev, port_base);
kfree(probe_ent);
kfree(hpriv);
pci_release_regions(pdev);
out_disable:
pci_disable_device(pdev);
return rc;
}
#ifdef CONFIG_PM
static int sil24_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct sil24_host_priv *hpriv = host->private_data;
ata_pci_device_do_resume(pdev);
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL);
sil24_init_controller(pdev, host->n_ports, host->ports[0]->flags,
hpriv->host_base, hpriv->port_base);
ata_host_resume(host);
return 0;
}
#endif
static int __init sil24_init(void)
{
return pci_register_driver(&sil24_pci_driver);
}
static void __exit sil24_exit(void)
{
pci_unregister_driver(&sil24_pci_driver);
}
MODULE_AUTHOR("Tejun Heo");
MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
module_init(sil24_init);
module_exit(sil24_exit);