OpenCloudOS-Kernel/drivers/acpi/acpi_pnp.c

391 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
/*
* ACPI support for PNP bus type
*
* Copyright (C) 2014, Intel Corporation
* Authors: Zhang Rui <rui.zhang@intel.com>
* Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*/
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/ctype.h>
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
#include "internal.h"
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
static const struct acpi_device_id acpi_pnp_device_ids[] = {
/* pata_isapnp */
{"PNP0600"}, /* Generic ESDI/IDE/ATA compatible hard disk controller */
/* floppy */
{"PNP0700"},
/* tpm_inf_pnp */
{"IFX0101"}, /* Infineon TPMs */
{"IFX0102"}, /* Infineon TPMs */
/*tpm_tis */
{"PNP0C31"}, /* TPM */
{"ATM1200"}, /* Atmel */
{"IFX0102"}, /* Infineon */
{"BCM0101"}, /* Broadcom */
{"BCM0102"}, /* Broadcom */
{"NSC1200"}, /* National */
{"ICO0102"}, /* Intel */
/* ide */
{"PNP0600"}, /* Generic ESDI/IDE/ATA compatible hard disk controller */
/* ns558 */
{"ASB16fd"}, /* AdLib NSC16 */
{"AZT3001"}, /* AZT1008 */
{"CDC0001"}, /* Opl3-SAx */
{"CSC0001"}, /* CS4232 */
{"CSC000f"}, /* CS4236 */
{"CSC0101"}, /* CS4327 */
{"CTL7001"}, /* SB16 */
{"CTL7002"}, /* AWE64 */
{"CTL7005"}, /* Vibra16 */
{"ENS2020"}, /* SoundscapeVIVO */
{"ESS0001"}, /* ES1869 */
{"ESS0005"}, /* ES1878 */
{"ESS6880"}, /* ES688 */
{"IBM0012"}, /* CS4232 */
{"OPT0001"}, /* OPTi Audio16 */
{"YMH0006"}, /* Opl3-SA */
{"YMH0022"}, /* Opl3-SAx */
{"PNPb02f"}, /* Generic */
/* i8042 kbd */
{"PNP0300"},
{"PNP0301"},
{"PNP0302"},
{"PNP0303"},
{"PNP0304"},
{"PNP0305"},
{"PNP0306"},
{"PNP0309"},
{"PNP030a"},
{"PNP030b"},
{"PNP0320"},
{"PNP0343"},
{"PNP0344"},
{"PNP0345"},
{"CPQA0D7"},
/* i8042 aux */
{"AUI0200"},
{"FJC6000"},
{"FJC6001"},
{"PNP0f03"},
{"PNP0f0b"},
{"PNP0f0e"},
{"PNP0f12"},
{"PNP0f13"},
{"PNP0f19"},
{"PNP0f1c"},
{"SYN0801"},
/* fcpnp */
{"AVM0900"},
/* radio-cadet */
{"MSM0c24"}, /* ADS Cadet AM/FM Radio Card */
/* radio-gemtek */
{"ADS7183"}, /* AOpen FX-3D/Pro Radio */
/* radio-sf16fmr2 */
{"MFRad13"}, /* tuner subdevice of SF16-FMD2 */
/* ene_ir */
{"ENE0100"},
{"ENE0200"},
{"ENE0201"},
{"ENE0202"},
/* fintek-cir */
{"FIT0002"}, /* CIR */
/* ite-cir */
{"ITE8704"}, /* Default model */
{"ITE8713"}, /* CIR found in EEEBox 1501U */
{"ITE8708"}, /* Bridged IT8512 */
{"ITE8709"}, /* SRAM-Bridged IT8512 */
/* nuvoton-cir */
{"WEC0530"}, /* CIR */
{"NTN0530"}, /* CIR for new chip's pnp id */
/* Winbond CIR */
{"WEC1022"},
/* wbsd */
{"WEC0517"},
{"WEC0518"},
/* Winbond CIR */
{"TCM5090"}, /* 3Com Etherlink III (TP) */
{"TCM5091"}, /* 3Com Etherlink III */
{"TCM5094"}, /* 3Com Etherlink III (combo) */
{"TCM5095"}, /* 3Com Etherlink III (TPO) */
{"TCM5098"}, /* 3Com Etherlink III (TPC) */
{"PNP80f7"}, /* 3Com Etherlink III compatible */
{"PNP80f8"}, /* 3Com Etherlink III compatible */
/* nsc-ircc */
{"NSC6001"},
{"HWPC224"},
{"IBM0071"},
/* smsc-ircc2 */
{"SMCf010"},
/* sb1000 */
{"GIC1000"},
/* parport_pc */
{"PNP0400"}, /* Standard LPT Printer Port */
{"PNP0401"}, /* ECP Printer Port */
/* apple-gmux */
{"APP000B"},
/* system */
{"PNP0c02"}, /* General ID for reserving resources */
{"PNP0c01"}, /* memory controller */
/* rtc_cmos */
{"PNP0b00"},
{"PNP0b01"},
{"PNP0b02"},
/* c6xdigio */
{"PNP0400"}, /* Standard LPT Printer Port */
{"PNP0401"}, /* ECP Printer Port */
/* ni_atmio.c */
{"NIC1900"},
{"NIC2400"},
{"NIC2500"},
{"NIC2600"},
{"NIC2700"},
/* serial */
{"AAC000F"}, /* Archtek America Corp. Archtek SmartLink Modem 3334BT Plug & Play */
{"ADC0001"}, /* Anchor Datacomm BV. SXPro 144 External Data Fax Modem Plug & Play */
{"ADC0002"}, /* SXPro 288 External Data Fax Modem Plug & Play */
{"AEI0250"}, /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */
{"AEI1240"}, /* Actiontec ISA PNP 56K X2 Fax Modem */
{"AKY1021"}, /* Rockwell 56K ACF II Fax+Data+Voice Modem */
{"ALI5123"}, /* ALi Fast Infrared Controller */
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
{"AZT4001"}, /* AZT3005 PnP SOUND DEVICE */
{"BDP3336"}, /* Best Data Products Inc. Smart One 336F PnP Modem */
{"BRI0A49"}, /* Boca Complete Ofc Communicator 14.4 Data-FAX */
{"BRI1400"}, /* Boca Research 33,600 ACF Modem */
{"BRI3400"}, /* Boca 33.6 Kbps Internal FD34FSVD */
{"BRI0A49"}, /* Boca 33.6 Kbps Internal FD34FSVD */
{"BDP3336"}, /* Best Data Products Inc. Smart One 336F PnP Modem */
{"CPI4050"}, /* Computer Peripherals Inc. EuroViVa CommCenter-33.6 SP PnP */
{"CTL3001"}, /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */
{"CTL3011"}, /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
{"DAV0336"}, /* Davicom ISA 33.6K Modem */
{"DMB1032"}, /* Creative Modem Blaster Flash56 DI5601-1 */
{"DMB2001"}, /* Creative Modem Blaster V.90 DI5660 */
{"ETT0002"}, /* E-Tech CyberBULLET PC56RVP */
{"FUJ0202"}, /* Fujitsu 33600 PnP-I2 R Plug & Play */
{"FUJ0205"}, /* Fujitsu FMV-FX431 Plug & Play */
{"FUJ0206"}, /* Fujitsu 33600 PnP-I4 R Plug & Play */
{"FUJ0209"}, /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */
{"GVC000F"}, /* Archtek SmartLink Modem 3334BT Plug & Play */
{"GVC0303"}, /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */
{"HAY0001"}, /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
{"HAY000C"}, /* Hayes Optima 336 V.34 + FAX + Voice PnP */
{"HAY000D"}, /* Hayes Optima 336B V.34 + FAX + Voice PnP */
{"HAY5670"}, /* Hayes Accura 56K Ext Fax Modem PnP */
{"HAY5674"}, /* Hayes Accura 56K Ext Fax Modem PnP */
{"HAY5675"}, /* Hayes Accura 56K Fax Modem PnP */
{"HAYF000"}, /* Hayes 288, V.34 + FAX */
{"HAYF001"}, /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */
{"IBM0033"}, /* IBM Thinkpad 701 Internal Modem Voice */
{"PNP4972"}, /* Intermec CV60 touchscreen port */
{"IXDC801"}, /* Intertex 28k8 33k6 Voice EXT PnP */
{"IXDC901"}, /* Intertex 33k6 56k Voice EXT PnP */
{"IXDD801"}, /* Intertex 28k8 33k6 Voice SP EXT PnP */
{"IXDD901"}, /* Intertex 33k6 56k Voice SP EXT PnP */
{"IXDF401"}, /* Intertex 28k8 33k6 Voice SP INT PnP */
{"IXDF801"}, /* Intertex 28k8 33k6 Voice SP EXT PnP */
{"IXDF901"}, /* Intertex 33k6 56k Voice SP EXT PnP */
{"KOR4522"}, /* KORTEX 28800 Externe PnP */
{"KORF661"}, /* KXPro 33.6 Vocal ASVD PnP */
{"LAS4040"}, /* LASAT Internet 33600 PnP */
{"LAS4540"}, /* Lasat Safire 560 PnP */
{"LAS5440"}, /* Lasat Safire 336 PnP */
{"MNP0281"}, /* Microcom TravelPorte FAST V.34 Plug & Play */
{"MNP0336"}, /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */
{"MNP0339"}, /* Microcom DeskPorte FAST EP 28.8 Plug & Play */
{"MNP0342"}, /* Microcom DeskPorte 28.8P Plug & Play */
{"MNP0500"}, /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
{"MNP0501"}, /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
{"MNP0502"}, /* Microcom DeskPorte 28.8S Internal Plug & Play */
{"MOT1105"}, /* Motorola BitSURFR Plug & Play */
{"MOT1111"}, /* Motorola TA210 Plug & Play */
{"MOT1114"}, /* Motorola HMTA 200 (ISDN) Plug & Play */
{"MOT1115"}, /* Motorola BitSURFR Plug & Play */
{"MOT1190"}, /* Motorola Lifestyle 28.8 Internal */
{"MOT1501"}, /* Motorola V.3400 Plug & Play */
{"MOT1502"}, /* Motorola Lifestyle 28.8 V.34 Plug & Play */
{"MOT1505"}, /* Motorola Power 28.8 V.34 Plug & Play */
{"MOT1509"}, /* Motorola ModemSURFR External 28.8 Plug & Play */
{"MOT150A"}, /* Motorola Premier 33.6 Desktop Plug & Play */
{"MOT150F"}, /* Motorola VoiceSURFR 56K External PnP */
{"MOT1510"}, /* Motorola ModemSURFR 56K External PnP */
{"MOT1550"}, /* Motorola ModemSURFR 56K Internal PnP */
{"MOT1560"}, /* Motorola ModemSURFR Internal 28.8 Plug & Play */
{"MOT1580"}, /* Motorola Premier 33.6 Internal Plug & Play */
{"MOT15B0"}, /* Motorola OnlineSURFR 28.8 Internal Plug & Play */
{"MOT15F0"}, /* Motorola VoiceSURFR 56K Internal PnP */
{"MVX00A1"}, /* Deskline K56 Phone System PnP */
{"MVX00F2"}, /* PC Rider K56 Phone System PnP */
{"nEC8241"}, /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */
{"PMC2430"}, /* Pace 56 Voice Internal Plug & Play Modem */
{"PNP0500"}, /* Generic standard PC COM port */
{"PNP0501"}, /* Generic 16550A-compatible COM port */
{"PNPC000"}, /* Compaq 14400 Modem */
{"PNPC001"}, /* Compaq 2400/9600 Modem */
{"PNPC031"}, /* Dial-Up Networking Serial Cable between 2 PCs */
{"PNPC032"}, /* Dial-Up Networking Parallel Cable between 2 PCs */
{"PNPC100"}, /* Standard 9600 bps Modem */
{"PNPC101"}, /* Standard 14400 bps Modem */
{"PNPC102"}, /* Standard 28800 bps Modem */
{"PNPC103"}, /* Standard Modem */
{"PNPC104"}, /* Standard 9600 bps Modem */
{"PNPC105"}, /* Standard 14400 bps Modem */
{"PNPC106"}, /* Standard 28800 bps Modem */
{"PNPC107"}, /* Standard Modem */
{"PNPC108"}, /* Standard 9600 bps Modem */
{"PNPC109"}, /* Standard 14400 bps Modem */
{"PNPC10A"}, /* Standard 28800 bps Modem */
{"PNPC10B"}, /* Standard Modem */
{"PNPC10C"}, /* Standard 9600 bps Modem */
{"PNPC10D"}, /* Standard 14400 bps Modem */
{"PNPC10E"}, /* Standard 28800 bps Modem */
{"PNPC10F"}, /* Standard Modem */
{"PNP2000"}, /* Standard PCMCIA Card Modem */
{"ROK0030"}, /* Rockwell 33.6 DPF Internal PnP, Modular Technology 33.6 Internal PnP */
{"ROK0100"}, /* KORTEX 14400 Externe PnP */
{"ROK4120"}, /* Rockwell 28.8 */
{"ROK4920"}, /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */
{"RSS00A0"}, /* Rockwell 33.6 DPF External PnP, BT Prologue 33.6 External PnP, Modular Technology 33.6 External PnP */
{"RSS0262"}, /* Viking 56K FAX INT */
{"RSS0250"}, /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */
{"SUP1310"}, /* SupraExpress 28.8 Data/Fax PnP modem */
{"SUP1381"}, /* SupraExpress 336i PnP Voice Modem */
{"SUP1421"}, /* SupraExpress 33.6 Data/Fax PnP modem */
{"SUP1590"}, /* SupraExpress 33.6 Data/Fax PnP modem */
{"SUP1620"}, /* SupraExpress 336i Sp ASVD */
{"SUP1760"}, /* SupraExpress 33.6 Data/Fax PnP modem */
{"SUP2171"}, /* SupraExpress 56i Sp Intl */
{"TEX0011"}, /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
{"UAC000F"}, /* Archtek SmartLink Modem 3334BT Plug & Play */
{"USR0000"}, /* 3Com Corp. Gateway Telepath IIvi 33.6 */
{"USR0002"}, /* U.S. Robotics Sporster 33.6K Fax INT PnP */
{"USR0004"}, /* Sportster Vi 14.4 PnP FAX Voicemail */
{"USR0006"}, /* U.S. Robotics 33.6K Voice INT PnP */
{"USR0007"}, /* U.S. Robotics 33.6K Voice EXT PnP */
{"USR0009"}, /* U.S. Robotics Courier V.Everything INT PnP */
{"USR2002"}, /* U.S. Robotics 33.6K Voice INT PnP */
{"USR2070"}, /* U.S. Robotics 56K Voice INT PnP */
{"USR2080"}, /* U.S. Robotics 56K Voice EXT PnP */
{"USR3031"}, /* U.S. Robotics 56K FAX INT */
{"USR3050"}, /* U.S. Robotics 56K FAX INT */
{"USR3070"}, /* U.S. Robotics 56K Voice INT PnP */
{"USR3080"}, /* U.S. Robotics 56K Voice EXT PnP */
{"USR3090"}, /* U.S. Robotics 56K Voice INT PnP */
{"USR9100"}, /* U.S. Robotics 56K Message */
{"USR9160"}, /* U.S. Robotics 56K FAX EXT PnP */
{"USR9170"}, /* U.S. Robotics 56K FAX INT PnP */
{"USR9180"}, /* U.S. Robotics 56K Voice EXT PnP */
{"USR9190"}, /* U.S. Robotics 56K Voice INT PnP */
{"WACFXXX"}, /* Wacom tablets */
{"FPI2002"}, /* Compaq touchscreen */
{"FUJ02B2"}, /* Fujitsu Stylistic touchscreens */
{"FUJ02B3"},
{"FUJ02B4"}, /* Fujitsu Stylistic LT touchscreens */
{"FUJ02B6"}, /* Passive Fujitsu Stylistic touchscreens */
{"FUJ02B7"},
{"FUJ02B8"},
{"FUJ02B9"},
{"FUJ02BC"},
{"FUJ02E5"}, /* Fujitsu Wacom Tablet PC device */
{"FUJ02E6"}, /* Fujitsu P-series tablet PC device */
{"FUJ02E7"}, /* Fujitsu Wacom 2FGT Tablet PC device */
{"FUJ02E9"}, /* Fujitsu Wacom 1FGT Tablet PC device */
{"LTS0001"}, /* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in disguise) */
{"WCI0003"}, /* Rockwell's (PORALiNK) 33600 INT PNP */
{"WEC1022"}, /* Winbond CIR port, should not be probed. We should keep track of it to prevent the legacy serial driver from probing it */
/* scl200wdt */
{"NSC0800"}, /* National Semiconductor PC87307/PC97307 watchdog component */
/* mpu401 */
{"PNPb006"},
/* cs423x-pnpbios */
{"CSC0100"},
{"CSC0103"},
{"CSC0110"},
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
{"CSC0000"},
{"GIM0100"}, /* Guillemot Turtlebeach something appears to be cs4232 compatible */
/* es18xx-pnpbios */
{"ESS1869"},
{"ESS1879"},
/* snd-opl3sa2-pnpbios */
{"YMH0021"},
{"NMX2210"}, /* Gateway Solo 2500 */
{""},
};
static bool matching_id(const char *idstr, const char *list_id)
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
{
int i;
if (strlen(idstr) != strlen(list_id))
return false;
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
if (memcmp(idstr, list_id, 3))
return false;
for (i = 3; i < 7; i++) {
char c = toupper(idstr[i]);
if (!isxdigit(c)
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
|| (list_id[i] != 'X' && c != toupper(list_id[i])))
return false;
}
return true;
}
static bool acpi_pnp_match(const char *idstr, const struct acpi_device_id **matchid)
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
{
const struct acpi_device_id *devid;
for (devid = acpi_pnp_device_ids; devid->id[0]; devid++)
if (matching_id(idstr, (char *)devid->id)) {
if (matchid)
*matchid = devid;
return true;
}
return false;
}
static int acpi_pnp_attach(struct acpi_device *adev,
const struct acpi_device_id *id)
{
return 1;
}
static struct acpi_scan_handler acpi_pnp_handler = {
.ids = acpi_pnp_device_ids,
.match = acpi_pnp_match,
.attach = acpi_pnp_attach,
};
/*
* For CMOS RTC devices, the PNP ACPI scan handler does not work, because
* there is a CMOS RTC ACPI scan handler installed already, so we need to
* check those devices and enumerate them to the PNP bus directly.
*/
static int is_cmos_rtc_device(struct acpi_device *adev)
{
static const struct acpi_device_id ids[] = {
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
{ "PNP0B00" },
{ "PNP0B01" },
{ "PNP0B02" },
{""},
};
return !acpi_match_device_ids(adev, ids);
}
bool acpi_is_pnp_device(struct acpi_device *adev)
{
return adev->handler == &acpi_pnp_handler || is_cmos_rtc_device(adev);
}
EXPORT_SYMBOL_GPL(acpi_is_pnp_device);
void __init acpi_pnp_init(void)
{
acpi_scan_add_handler(&acpi_pnp_handler);
}