UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/s390/kvm/interrupt.c

2541 lines
67 KiB
C
Raw Normal View History

KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
/*
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 17:15:04 +08:00
* handling kvm guest interrupts
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
*
KVM: s390: Use insn_length() to calculate length of instruction The common s390 function insn_length() results in slightly smaller (and thus hopefully faster) code than the calculation of the instruction length via a lookup-table. So let's use that function in the interrupt delivery code, too. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-11 17:38:46 +08:00
* Copyright IBM Corp. 2008, 2015
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
* as published by the Free Software Foundation.
*
* Author(s): Carsten Otte <cotte@de.ibm.com>
*/
KVM: s390: use hrtimer for clock wakeup from idle - v2 This patch reworks the s390 clock comparator wakeup to hrtimer. The clock comparator is a per-cpu value that is compared against the TOD clock. If ckc <= TOD an external interrupt 1004 is triggered. Since the clock comparator and the TOD clock have a much higher resolution than jiffies we should use hrtimers to trigger the wakeup. This speeds up guest nanosleep for small values. Since hrtimers callbacks run in hard-irq context, I added a tasklet to do the actual work with enabled interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-12 23:21:49 +08:00
#include <linux/interrupt.h>
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
#include <linux/kvm_host.h>
[S390] Cleanup struct _lowcore usage and defines. Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-27 05:37:43 +08:00
#include <linux/hrtimer.h>
KVM: s390: irq routing for adapter interrupts. Introduce a new interrupt class for s390 adapter interrupts and enable irqfds for s390. This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP, that needs to be enabled by userspace. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15 19:36:01 +08:00
#include <linux/mmu_context.h>
KVM: s390: Fix program check on interrupt delivery handling The current interrupt handling on s390 misbehaves on an error case. On s390 each cpu has the prefix area (lowcore) for interrupt delivery. This memory must always be available. If we fail to access the prefix area for a guest on interrupt delivery the configuration is completely unusable. There is no point in sending another program interrupt to an inaccessible lowcore. Furthermore, we should not bug the host kernel, because this can be triggered by userspace. I think the guest kernel itself can not trigger the problem, as SET PREFIX and SIGNAL PROCESSOR SET PREFIX both check that the memory is available and sane. As this is a userspace bug (e.g. setting the wrong guest offset, unmapping guest memory) we should kill the userspace process instead of BUGing the host kernel. In the long term we probably should notify the userspace process about this problem. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-25 21:51:54 +08:00
#include <linux/signal.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
#include <linux/bitmap.h>
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
#include <linux/vmalloc.h>
[S390] Cleanup struct _lowcore usage and defines. Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-27 05:37:43 +08:00
#include <asm/asm-offsets.h>
KVM: s390: Use insn_length() to calculate length of instruction The common s390 function insn_length() results in slightly smaller (and thus hopefully faster) code than the calculation of the instruction length via a lookup-table. So let's use that function in the interrupt delivery code, too. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-11 17:38:46 +08:00
#include <asm/dis.h>
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25 03:46:01 +08:00
#include <linux/uaccess.h>
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
#include <asm/sclp.h>
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
#include <asm/isc.h>
s390/mm: split arch/s390/mm/pgtable.c The pgtable.c file is quite big, before it grows any larger split it into pgtable.c, pgalloc.c and gmap.c. In addition move the gmap related header definitions into the new gmap.h header and all of the pgste helpers from pgtable.h to pgtable.c. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-08 18:49:57 +08:00
#include <asm/gmap.h>
KVM: s390: split store status and machine check handling Store status writes the prefix which is not to be done by a machine check. Also, the psw is stored and later on overwritten by the failing-storage address, which looks strange at first sight. Store status and machine check handling look similar, but they are actually two different things. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-03 17:18:57 +08:00
#include <asm/switch_to.h>
KVM: s390: fix delivery of vector regs during machine checks Vector registers are only to be stored if the facility is available and if the guest has set up the machine check extended save area. If anything goes wrong while writing the vector registers, the vector registers are to be marked as invalid. Please note that we are allowed to write the registers although they are marked as invalid. Machine checks and "store status" SIGP orders are two different concepts, let's correctly separate these. As the SIGP part is completely handled in user space, we can drop it. This patch is based on a patch from Cornelia Huck. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:57:56 +08:00
#include <asm/nmi.h>
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
#include "kvm-s390.h"
#include "gaccess.h"
KVM: s390: Add implementation-specific trace events Introduce a new trace system, kvm-s390, for some kvm/s390 specific trace points: - injection of interrupts - delivery of interrupts to the guest - creation/destruction of kvm machines and vcpus - stop actions for vcpus - reset requests for userspace Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-23 23:20:30 +08:00
#include "trace-s390.h"
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: add defines for pfault init delivery code Get rid of open coded values for pfault init. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-16 19:57:18 +08:00
#define PFAULT_INIT 0x0600
KVM: s390: add defines for virtio and pfault interrupt code Get rid of open coded value for virtio and pfault completion interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-11-11 00:20:07 +08:00
#define PFAULT_DONE 0x0680
#define VIRTIO_PARAM 0x0d00
KVM: s390: Support for I/O interrupts. Add support for handling I/O interrupts (standard, subchannel-related ones and rudimentary adapter interrupts). The subchannel-identifying parameters are encoded into the interrupt type. I/O interrupts are floating, so they can't be injected on a specific vcpu. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:08 +08:00
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
/* handle external calls via sigp interpretation facility */
static int sca_ext_call_pending(struct kvm_vcpu *vcpu, int *src_id)
{
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
int c, scn;
KVM: s390: fast path for sca_ext_call_pending If CPUSTAT_ECALL_PEND isn't set, we can't have an external call pending, so we can directly avoid taking the lock. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-23 15:45:50 +08:00
if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_ECALL_PEND))
return 0;
KVM: s390: allow 255 VCPUs when sca entries aren't used If the SCA entries aren't used by the hardware (no SIGPIF), we can simply not set the entries, stick to the basic sca and allow more than 64 VCPUs. To hinder any other facility from using these entries, let's properly provoke intercepts by not setting the MCN and keeping the entries unset. This effectively allows when running KVM under KVM (vSIE) or under z/VM to provide more than 64 VCPUs to a guest. Let's limit it to 255 for now, to not run into problems if the CPU numbers are limited somewhere else. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-09 04:39:32 +08:00
BUG_ON(!kvm_s390_use_sca_entries());
KVM: s390: Introduce switching code This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 00:08:39 +08:00
read_lock(&vcpu->kvm->arch.sca_lock);
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
if (vcpu->kvm->arch.use_esca) {
struct esca_block *sca = vcpu->kvm->arch.sca;
union esca_sigp_ctrl sigp_ctrl =
sca->cpu[vcpu->vcpu_id].sigp_ctrl;
c = sigp_ctrl.c;
scn = sigp_ctrl.scn;
} else {
struct bsca_block *sca = vcpu->kvm->arch.sca;
union bsca_sigp_ctrl sigp_ctrl =
sca->cpu[vcpu->vcpu_id].sigp_ctrl;
c = sigp_ctrl.c;
scn = sigp_ctrl.scn;
}
KVM: s390: Introduce switching code This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 00:08:39 +08:00
read_unlock(&vcpu->kvm->arch.sca_lock);
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
if (src_id)
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
*src_id = scn;
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
KVM: s390: fast path for sca_ext_call_pending If CPUSTAT_ECALL_PEND isn't set, we can't have an external call pending, so we can directly avoid taking the lock. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-23 15:45:50 +08:00
return c;
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
}
static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
{
KVM: s390: Introduce new structures This patch adds new structures and updates some existing ones to provide the base for Extended SCA functionality. The old sca_* structures were renamed to bsca_* to keep things uniform. The access to fields of SIGP controls were turned into bitfields instead of hardcoded bitmasks. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 22:09:06 +08:00
int expect, rc;
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
KVM: s390: allow 255 VCPUs when sca entries aren't used If the SCA entries aren't used by the hardware (no SIGPIF), we can simply not set the entries, stick to the basic sca and allow more than 64 VCPUs. To hinder any other facility from using these entries, let's properly provoke intercepts by not setting the MCN and keeping the entries unset. This effectively allows when running KVM under KVM (vSIE) or under z/VM to provide more than 64 VCPUs to a guest. Let's limit it to 255 for now, to not run into problems if the CPU numbers are limited somewhere else. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-09 04:39:32 +08:00
BUG_ON(!kvm_s390_use_sca_entries());
KVM: s390: Introduce switching code This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 00:08:39 +08:00
read_lock(&vcpu->kvm->arch.sca_lock);
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
if (vcpu->kvm->arch.use_esca) {
struct esca_block *sca = vcpu->kvm->arch.sca;
union esca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
union esca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
new_val.scn = src_id;
new_val.c = 1;
old_val.c = 0;
expect = old_val.value;
rc = cmpxchg(&sigp_ctrl->value, old_val.value, new_val.value);
} else {
struct bsca_block *sca = vcpu->kvm->arch.sca;
union bsca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
union bsca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
KVM: s390: Introduce new structures This patch adds new structures and updates some existing ones to provide the base for Extended SCA functionality. The old sca_* structures were renamed to bsca_* to keep things uniform. The access to fields of SIGP controls were turned into bitfields instead of hardcoded bitmasks. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 22:09:06 +08:00
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
new_val.scn = src_id;
new_val.c = 1;
old_val.c = 0;
expect = old_val.value;
rc = cmpxchg(&sigp_ctrl->value, old_val.value, new_val.value);
}
KVM: s390: Introduce switching code This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 00:08:39 +08:00
read_unlock(&vcpu->kvm->arch.sca_lock);
KVM: s390: Introduce new structures This patch adds new structures and updates some existing ones to provide the base for Extended SCA functionality. The old sca_* structures were renamed to bsca_* to keep things uniform. The access to fields of SIGP controls were turned into bitfields instead of hardcoded bitmasks. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 22:09:06 +08:00
if (rc != expect) {
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
/* another external call is pending */
return -EBUSY;
}
atomic_or(CPUSTAT_ECALL_PEND, &vcpu->arch.sie_block->cpuflags);
return 0;
}
static void sca_clear_ext_call(struct kvm_vcpu *vcpu)
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
int rc, expect;
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
KVM: s390: allow 255 VCPUs when sca entries aren't used If the SCA entries aren't used by the hardware (no SIGPIF), we can simply not set the entries, stick to the basic sca and allow more than 64 VCPUs. To hinder any other facility from using these entries, let's properly provoke intercepts by not setting the MCN and keeping the entries unset. This effectively allows when running KVM under KVM (vSIE) or under z/VM to provide more than 64 VCPUs to a guest. Let's limit it to 255 for now, to not run into problems if the CPU numbers are limited somewhere else. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-09 04:39:32 +08:00
if (!kvm_s390_use_sca_entries())
return;
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
atomic_andnot(CPUSTAT_ECALL_PEND, li->cpuflags);
KVM: s390: Introduce switching code This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 00:08:39 +08:00
read_lock(&vcpu->kvm->arch.sca_lock);
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
if (vcpu->kvm->arch.use_esca) {
struct esca_block *sca = vcpu->kvm->arch.sca;
union esca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
union esca_sigp_ctrl old = *sigp_ctrl;
expect = old.value;
rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
} else {
struct bsca_block *sca = vcpu->kvm->arch.sca;
union bsca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
union bsca_sigp_ctrl old = *sigp_ctrl;
expect = old.value;
rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
}
KVM: s390: Introduce switching code This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-23 00:08:39 +08:00
read_unlock(&vcpu->kvm->arch.sca_lock);
KVM: s390: Make provisions for ESCA utilization This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-22 23:09:44 +08:00
WARN_ON(rc != expect); /* cannot clear? */
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
}
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
int psw_extint_disabled(struct kvm_vcpu *vcpu)
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
{
return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_EXT);
}
KVM: s390: Support for I/O interrupts. Add support for handling I/O interrupts (standard, subchannel-related ones and rudimentary adapter interrupts). The subchannel-identifying parameters are encoded into the interrupt type. I/O interrupts are floating, so they can't be injected on a specific vcpu. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:08 +08:00
static int psw_ioint_disabled(struct kvm_vcpu *vcpu)
{
return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_IO);
}
KVM: s390: Add support for machine checks. Add support for injecting machine checks (only repressible conditions for now). This is a bit more involved than I/O interrupts, for these reasons: - Machine checks come in both floating and cpu varieties. - We don't have a bit for machine checks enabling, but have to use a roundabout approach with trapping PSW changing instructions and watching for opened machine checks. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:09 +08:00
static int psw_mchk_disabled(struct kvm_vcpu *vcpu)
{
return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_MCHECK);
}
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
static int psw_interrupts_disabled(struct kvm_vcpu *vcpu)
{
KVM: s390: disabled wait cares about machine checks, not PER We don't care about program event recording irqs (synchronous program irqs) but asynchronous irqs when checking for disabled wait. Machine checks were missing. Let's directly switch to the functions we have for that purpose instead of testing once again for magic bits. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-28 19:32:38 +08:00
return psw_extint_disabled(vcpu) &&
psw_ioint_disabled(vcpu) &&
psw_mchk_disabled(vcpu);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: s390: move timer interrupt checks into own functions This patch moves the checks for enabled timer (clock-comparator) interrupts and pending timer interrupts into own functions, making the code better readable and easier to maintain. The method kvm_cpu_has_pending_timer is filled with life. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-18 17:03:26 +08:00
static int ckc_interrupts_enabled(struct kvm_vcpu *vcpu)
{
if (psw_extint_disabled(vcpu) ||
!(vcpu->arch.sie_block->gcr[0] & 0x800ul))
return 0;
KVM: s390: no timer interrupts when single-stepping a guest When a guest is single-stepped, we want to disable timer interrupts. Otherwise, the guest will continuously execute the external interrupt handler and make debugging of code where timer interrupts are enabled almost impossible. The delivery of timer interrupts can be enforced in such sections by setting a breakpoint and continuing execution. In order to disable timer interrupts, they are disabled in the control register of the guest just before SIE entry and are suppressed in the interrupt check/delivery methods. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-18 17:06:14 +08:00
if (guestdbg_enabled(vcpu) && guestdbg_sstep_enabled(vcpu))
/* No timer interrupts when single stepping */
return 0;
KVM: s390: move timer interrupt checks into own functions This patch moves the checks for enabled timer (clock-comparator) interrupts and pending timer interrupts into own functions, making the code better readable and easier to maintain. The method kvm_cpu_has_pending_timer is filled with life. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-18 17:03:26 +08:00
return 1;
}
KVM: s390: cpu timer irq priority We now have a mechanism for delivering interrupts according to their priority. Let's inject them using our new infrastructure (instead of letting only hardware handle them), so we can be sure that the irq priorities are satisfied. For s390, the cpu timer and the clock comparator are to be checked for common code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when the guest is being executed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-01 22:55:42 +08:00
static int ckc_irq_pending(struct kvm_vcpu *vcpu)
{
KVM: s390: factor out reading of the guest TOD clock Let's factor this out and always use get_tod_clock_fast() when reading the guest TOD. STORE CLOCK FAST does not do serialization and, therefore, might result in some fuzziness between different processors in a way that subsequent calls on different CPUs might have time stamps that are earlier. This semantics is fine though for all KVM use cases. To make it obvious that the new function has STORE CLOCK FAST semantics we name it kvm_s390_get_tod_clock_fast. With this patch, we only have a handful of places were we have to care about STP sync (using preempt_disable() logic). Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-29 22:20:36 +08:00
if (vcpu->arch.sie_block->ckc >= kvm_s390_get_tod_clock_fast(vcpu->kvm))
KVM: s390: cpu timer irq priority We now have a mechanism for delivering interrupts according to their priority. Let's inject them using our new infrastructure (instead of letting only hardware handle them), so we can be sure that the irq priorities are satisfied. For s390, the cpu timer and the clock comparator are to be checked for common code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when the guest is being executed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-01 22:55:42 +08:00
return 0;
return ckc_interrupts_enabled(vcpu);
}
static int cpu_timer_interrupts_enabled(struct kvm_vcpu *vcpu)
{
return !psw_extint_disabled(vcpu) &&
(vcpu->arch.sie_block->gcr[0] & 0x400ul);
}
static int cpu_timer_irq_pending(struct kvm_vcpu *vcpu)
{
KVM: s390: abstract access to the VCPU cpu timer We want to manually step the cpu timer in certain scenarios in the future. Let's abstract any access to the cpu timer, so we can hide the complexity internally. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-15 16:40:12 +08:00
if (!cpu_timer_interrupts_enabled(vcpu))
return 0;
return kvm_s390_get_cpu_timer(vcpu) >> 63;
KVM: s390: cpu timer irq priority We now have a mechanism for delivering interrupts according to their priority. Let's inject them using our new infrastructure (instead of letting only hardware handle them), so we can be sure that the irq priorities are satisfied. For s390, the cpu timer and the clock comparator are to be checked for common code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when the guest is being executed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-01 22:55:42 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static inline int is_ioirq(unsigned long irq_type)
KVM: s390: Fix handling of iscs. There are two ways to express an interruption subclass: - As a bitmask, as used in cr6. - As a number, as used in the I/O interruption word. Unfortunately, we have treated the I/O interruption word as if it contained the bitmask as well, which went unnoticed so far as - (not-yet-released) qemu made the same mistake, and - Linux guest kernels don't check the isc value in the I/O interruption word for subchannel interrupts. Make sure that we treat the I/O interruption word correctly. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-07 20:20:52 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
return ((irq_type >= IRQ_PEND_IO_ISC_0) &&
(irq_type <= IRQ_PEND_IO_ISC_7));
}
KVM: s390: Fix handling of iscs. There are two ways to express an interruption subclass: - As a bitmask, as used in cr6. - As a number, as used in the I/O interruption word. Unfortunately, we have treated the I/O interruption word as if it contained the bitmask as well, which went unnoticed so far as - (not-yet-released) qemu made the same mistake, and - Linux guest kernels don't check the isc value in the I/O interruption word for subchannel interrupts. Make sure that we treat the I/O interruption word correctly. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-07 20:20:52 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static uint64_t isc_to_isc_bits(int isc)
{
KVM: s390: Fix handling of iscs. There are two ways to express an interruption subclass: - As a bitmask, as used in cr6. - As a number, as used in the I/O interruption word. Unfortunately, we have treated the I/O interruption word as if it contained the bitmask as well, which went unnoticed so far as - (not-yet-released) qemu made the same mistake, and - Linux guest kernels don't check the isc value in the I/O interruption word for subchannel interrupts. Make sure that we treat the I/O interruption word correctly. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-07 20:20:52 +08:00
return (0x80 >> isc) << 24;
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static inline u8 int_word_to_isc(u32 int_word)
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
return (int_word & 0x38000000) >> 27;
}
KVM: s390: set interception requests for all floating irqs No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-28 20:27:51 +08:00
static inline unsigned long pending_irqs(struct kvm_vcpu *vcpu)
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
{
KVM: s390: set interception requests for all floating irqs No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-28 20:27:51 +08:00
return vcpu->kvm->arch.float_int.pending_irqs |
vcpu->arch.local_int.pending_irqs;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static unsigned long disable_iscs(struct kvm_vcpu *vcpu,
unsigned long active_mask)
{
int i;
for (i = 0; i <= MAX_ISC; i++)
if (!(vcpu->arch.sie_block->gcr[6] & isc_to_isc_bits(i)))
active_mask &= ~(1UL << (IRQ_PEND_IO_ISC_0 + i));
return active_mask;
}
static unsigned long deliverable_irqs(struct kvm_vcpu *vcpu)
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
unsigned long active_mask;
KVM: s390: set interception requests for all floating irqs No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-28 20:27:51 +08:00
active_mask = pending_irqs(vcpu);
KVM: s390: optimize interrupt handling round trip time We can avoid checking guest control registers and guest PSW as well as all the masking and calculations on the interrupt masks when no interrupts are pending. Also, the check for IRQ_PEND_COUNT can be removed, because we won't enter the while loop if no interrupts are pending and invalid interrupt types can't be injected. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-17 16:21:04 +08:00
if (!active_mask)
return 0;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
if (psw_extint_disabled(vcpu))
active_mask &= ~IRQ_PEND_EXT_MASK;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (psw_ioint_disabled(vcpu))
active_mask &= ~IRQ_PEND_IO_MASK;
else
active_mask = disable_iscs(vcpu, active_mask);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
if (!(vcpu->arch.sie_block->gcr[0] & 0x2000ul))
__clear_bit(IRQ_PEND_EXT_EXTERNAL, &active_mask);
if (!(vcpu->arch.sie_block->gcr[0] & 0x4000ul))
__clear_bit(IRQ_PEND_EXT_EMERGENCY, &active_mask);
if (!(vcpu->arch.sie_block->gcr[0] & 0x800ul))
__clear_bit(IRQ_PEND_EXT_CLOCK_COMP, &active_mask);
if (!(vcpu->arch.sie_block->gcr[0] & 0x400ul))
__clear_bit(IRQ_PEND_EXT_CPU_TIMER, &active_mask);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (!(vcpu->arch.sie_block->gcr[0] & 0x200ul))
__clear_bit(IRQ_PEND_EXT_SERVICE, &active_mask);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
if (psw_mchk_disabled(vcpu))
active_mask &= ~IRQ_PEND_MCHK_MASK;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (!(vcpu->arch.sie_block->gcr[14] &
vcpu->kvm->arch.float_int.mchk.cr14))
__clear_bit(IRQ_PEND_MCHK_REP, &active_mask);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
/*
* STOP irqs will never be actively delivered. They are triggered via
* intercept requests and cleared when the stop intercept is performed.
*/
__clear_bit(IRQ_PEND_SIGP_STOP, &active_mask);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
return active_mask;
}
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
static void __set_cpu_idle(struct kvm_vcpu *vcpu)
{
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_WAIT, &vcpu->arch.sie_block->cpuflags);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
set_bit(vcpu->vcpu_id, vcpu->arch.local_int.float_int->idle_mask);
}
static void __unset_cpu_idle(struct kvm_vcpu *vcpu)
{
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_andnot(CPUSTAT_WAIT, &vcpu->arch.sie_block->cpuflags);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
clear_bit(vcpu->vcpu_id, vcpu->arch.local_int.float_int->idle_mask);
}
static void __reset_intercept_indicators(struct kvm_vcpu *vcpu)
{
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_andnot(CPUSTAT_IO_INT | CPUSTAT_EXT_INT | CPUSTAT_STOP_INT,
&vcpu->arch.sie_block->cpuflags);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
vcpu->arch.sie_block->lctl = 0x0000;
KVM: s390: hardware support for guest debugging This patch adds support to debug the guest using the PER facility on s390. Single-stepping, hardware breakpoints and hardware watchpoints are supported. In order to use the PER facility of the guest without it noticing it, the control registers of the guest have to be patched and access to them has to be intercepted(stctl, stctg, lctl, lctlg). All PER program interrupts have to be intercepted and only the relevant PER interrupts for the guest have to be given back. Special care has to be taken about repeated exits on the same hardware breakpoint. The intervention of the host in the guests PER configuration is not fully transparent. PER instruction nullification can not be used by the guest and too many storage alteration events may be reported to the guest (if it is activated for special address ranges only) when the host concurrently debugging it. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-23 19:26:52 +08:00
vcpu->arch.sie_block->ictl &= ~(ICTL_LPSW | ICTL_STCTL | ICTL_PINT);
if (guestdbg_enabled(vcpu)) {
vcpu->arch.sie_block->lctl |= (LCTL_CR0 | LCTL_CR9 |
LCTL_CR10 | LCTL_CR11);
vcpu->arch.sie_block->ictl |= (ICTL_STCTL | ICTL_PINT);
}
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag)
{
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(flag, &vcpu->arch.sie_block->cpuflags);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static void set_intercept_indicators_io(struct kvm_vcpu *vcpu)
{
KVM: s390: set interception requests for all floating irqs No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-28 20:27:51 +08:00
if (!(pending_irqs(vcpu) & IRQ_PEND_IO_MASK))
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
return;
else if (psw_ioint_disabled(vcpu))
__set_cpuflag(vcpu, CPUSTAT_IO_INT);
else
vcpu->arch.sie_block->lctl |= LCTL_CR6;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static void set_intercept_indicators_ext(struct kvm_vcpu *vcpu)
{
KVM: s390: set interception requests for all floating irqs No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-28 20:27:51 +08:00
if (!(pending_irqs(vcpu) & IRQ_PEND_EXT_MASK))
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
return;
if (psw_extint_disabled(vcpu))
__set_cpuflag(vcpu, CPUSTAT_EXT_INT);
else
vcpu->arch.sie_block->lctl |= LCTL_CR0;
}
static void set_intercept_indicators_mchk(struct kvm_vcpu *vcpu)
{
KVM: s390: set interception requests for all floating irqs No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-28 20:27:51 +08:00
if (!(pending_irqs(vcpu) & IRQ_PEND_MCHK_MASK))
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
return;
if (psw_mchk_disabled(vcpu))
vcpu->arch.sie_block->ictl |= ICTL_LPSW;
else
vcpu->arch.sie_block->lctl |= LCTL_CR14;
}
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
static void set_intercept_indicators_stop(struct kvm_vcpu *vcpu)
{
if (kvm_s390_is_stop_irq_pending(vcpu))
__set_cpuflag(vcpu, CPUSTAT_STOP_INT);
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
/* Set interception request for non-deliverable interrupts */
static void set_intercept_indicators(struct kvm_vcpu *vcpu)
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
set_intercept_indicators_io(vcpu);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
set_intercept_indicators_ext(vcpu);
set_intercept_indicators_mchk(vcpu);
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
set_intercept_indicators_stop(vcpu);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
}
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
static int __must_check __deliver_cpu_timer(struct kvm_vcpu *vcpu)
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
int rc;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_INT_CPU_TIMER,
0, 0);
rc = put_guest_lc(vcpu, EXT_IRQ_CPU_TIMER,
(u16 *)__LC_EXT_INT_CODE);
KVM: s390: some ext irqs have to clear the ext cpu addr The cpu address of a source cpu (responsible for an external irq) is only to be stored if bit 6 of the ext irq code is set. If bit 6 is not set, it is to be zeroed out. The special external irq code used for virtio and pfault uses the cpu addr as a parameter field. As bit 6 is set, this implementation is correct. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-01 19:02:44 +08:00
rc |= put_guest_lc(vcpu, 0, (u16 *)__LC_EXT_CPU_ADDR);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
clear_bit(IRQ_PEND_EXT_CPU_TIMER, &li->pending_irqs);
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
static int __must_check __deliver_ckc(struct kvm_vcpu *vcpu)
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
int rc;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_INT_CLOCK_COMP,
0, 0);
rc = put_guest_lc(vcpu, EXT_IRQ_CLK_COMP,
(u16 __user *)__LC_EXT_INT_CODE);
KVM: s390: some ext irqs have to clear the ext cpu addr The cpu address of a source cpu (responsible for an external irq) is only to be stored if bit 6 of the ext irq code is set. If bit 6 is not set, it is to be zeroed out. The special external irq code used for virtio and pfault uses the cpu addr as a parameter field. As bit 6 is set, this implementation is correct. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-01 19:02:44 +08:00
rc |= put_guest_lc(vcpu, 0, (u16 *)__LC_EXT_CPU_ADDR);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
clear_bit(IRQ_PEND_EXT_CLOCK_COMP, &li->pending_irqs);
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __must_check __deliver_pfault_init(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
struct kvm_s390_ext_info ext;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
int rc;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
spin_lock(&li->lock);
ext = li->irq.ext;
clear_bit(IRQ_PEND_PFAULT_INIT, &li->pending_irqs);
li->irq.ext.ext_params2 = 0;
spin_unlock(&li->lock);
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 4, "deliver: pfault init token 0x%llx",
ext.ext_params2);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
KVM_S390_INT_PFAULT_INIT,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
0, ext.ext_params2);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc = put_guest_lc(vcpu, EXT_IRQ_CP_SERVICE, (u16 *) __LC_EXT_INT_CODE);
rc |= put_guest_lc(vcpu, PFAULT_INIT, (u16 *) __LC_EXT_CPU_ADDR);
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, ext.ext_params2, (u64 *) __LC_EXT_PARAMS2);
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
static int __write_machine_check(struct kvm_vcpu *vcpu,
struct kvm_s390_mchk_info *mchk)
{
unsigned long ext_sa_addr;
KVM: s390: gs support for kvm guests This patch adds guarded storage support for KVM guest. We need to setup the necessary control blocks, the kvm_run structure for the new registers, the necessary wrappers for VSIE, as well as the machine check save areas. GS is enabled lazily and the register saving and reloading is done in KVM code. As this feature adds new content for migration, we provide a new capability for enablement (KVM_CAP_S390_GS). Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-11-29 14:17:55 +08:00
unsigned long lc;
KVM: s390: split store status and machine check handling Store status writes the prefix which is not to be done by a machine check. Also, the psw is stored and later on overwritten by the failing-storage address, which looks strange at first sight. Store status and machine check handling look similar, but they are actually two different things. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-03 17:18:57 +08:00
freg_t fprs[NUM_FPRS];
KVM: s390: fix delivery of vector regs during machine checks Vector registers are only to be stored if the facility is available and if the guest has set up the machine check extended save area. If anything goes wrong while writing the vector registers, the vector registers are to be marked as invalid. Please note that we are allowed to write the registers although they are marked as invalid. Machine checks and "store status" SIGP orders are two different concepts, let's correctly separate these. As the SIGP part is completely handled in user space, we can drop it. This patch is based on a patch from Cornelia Huck. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:57:56 +08:00
union mci mci;
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
int rc;
KVM: s390: fix delivery of vector regs during machine checks Vector registers are only to be stored if the facility is available and if the guest has set up the machine check extended save area. If anything goes wrong while writing the vector registers, the vector registers are to be marked as invalid. Please note that we are allowed to write the registers although they are marked as invalid. Machine checks and "store status" SIGP orders are two different concepts, let's correctly separate these. As the SIGP part is completely handled in user space, we can drop it. This patch is based on a patch from Cornelia Huck. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:57:56 +08:00
mci.val = mchk->mcic;
KVM: s390: handle access registers in the run ioctl not in vcpu_put/load Right now we save the host access registers in kvm_arch_vcpu_load and load them in kvm_arch_vcpu_put. Vice versa for the guest access registers. On schedule this means, that we load/save access registers multiple times. e.g. VCPU_RUN with just one reschedule and then return does [from user space via VCPU_RUN] - save the host registers in kvm_arch_vcpu_load (via ioctl) - load the guest registers in kvm_arch_vcpu_load (via ioctl) - do guest stuff - decide to schedule/sleep - save the guest registers in kvm_arch_vcpu_put (via sched) - load the host registers in kvm_arch_vcpu_put (via sched) - save the host registers in switch_to (via sched) - schedule - return - load the host registers in switch_to (via sched) - save the host registers in kvm_arch_vcpu_load (via sched) - load the guest registers in kvm_arch_vcpu_load (via sched) - do guest stuff - decide to go to userspace - save the guest registers in kvm_arch_vcpu_put (via ioctl) - load the host registers in kvm_arch_vcpu_put (via ioctl) [back to user space] As the kernel does not use access registers, we can avoid this reloading and simply piggy back on switch_to (let it save the guest values instead of host values in thread.acrs) by moving the host/guest switch into the VCPU_RUN ioctl function. We now do [from user space via VCPU_RUN] - save the host registers in kvm_arch_vcpu_ioctl_run - load the guest registers in kvm_arch_vcpu_ioctl_run - do guest stuff - decide to schedule/sleep - save the guest registers in switch_to - schedule - return - load the guest registers in switch_to (via sched) - do guest stuff - decide to go to userspace - save the guest registers in kvm_arch_vcpu_ioctl_run - load the host registers in kvm_arch_vcpu_ioctl_run This seems to save about 10% of the vcpu_put/load functions according to perf. As vcpu_load no longer switches the acrs, We can also loading the acrs in kvm_arch_vcpu_ioctl_set_sregs. Suggested-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-11-10 21:22:02 +08:00
/* take care of lazy register loading */
KVM: s390: split store status and machine check handling Store status writes the prefix which is not to be done by a machine check. Also, the psw is stored and later on overwritten by the failing-storage address, which looks strange at first sight. Store status and machine check handling look similar, but they are actually two different things. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-03 17:18:57 +08:00
save_fpu_regs();
save_access_regs(vcpu->run->s.regs.acrs);
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
/* Extended save area */
s390: add a system call for guarded storage This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26 21:10:34 +08:00
rc = read_guest_lc(vcpu, __LC_MCESAD, &ext_sa_addr,
sizeof(unsigned long));
KVM: s390: gs support for kvm guests This patch adds guarded storage support for KVM guest. We need to setup the necessary control blocks, the kvm_run structure for the new registers, the necessary wrappers for VSIE, as well as the machine check save areas. GS is enabled lazily and the register saving and reloading is done in KVM code. As this feature adds new content for migration, we provide a new capability for enablement (KVM_CAP_S390_GS). Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-11-29 14:17:55 +08:00
/* Only bits 0 through 63-LC are used for address formation */
lc = ext_sa_addr & MCESA_LC_MASK;
if (test_kvm_facility(vcpu->kvm, 133)) {
switch (lc) {
case 0:
case 10:
ext_sa_addr &= ~0x3ffUL;
break;
case 11:
ext_sa_addr &= ~0x7ffUL;
break;
case 12:
ext_sa_addr &= ~0xfffUL;
break;
default:
ext_sa_addr = 0;
break;
}
} else {
ext_sa_addr &= ~0x3ffUL;
}
KVM: s390: fix delivery of vector regs during machine checks Vector registers are only to be stored if the facility is available and if the guest has set up the machine check extended save area. If anything goes wrong while writing the vector registers, the vector registers are to be marked as invalid. Please note that we are allowed to write the registers although they are marked as invalid. Machine checks and "store status" SIGP orders are two different concepts, let's correctly separate these. As the SIGP part is completely handled in user space, we can drop it. This patch is based on a patch from Cornelia Huck. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:57:56 +08:00
if (!rc && mci.vr && ext_sa_addr && test_kvm_facility(vcpu->kvm, 129)) {
if (write_guest_abs(vcpu, ext_sa_addr, vcpu->run->s.regs.vrs,
512))
mci.vr = 0;
} else {
mci.vr = 0;
}
KVM: s390: gs support for kvm guests This patch adds guarded storage support for KVM guest. We need to setup the necessary control blocks, the kvm_run structure for the new registers, the necessary wrappers for VSIE, as well as the machine check save areas. GS is enabled lazily and the register saving and reloading is done in KVM code. As this feature adds new content for migration, we provide a new capability for enablement (KVM_CAP_S390_GS). Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-11-29 14:17:55 +08:00
if (!rc && mci.gs && ext_sa_addr && test_kvm_facility(vcpu->kvm, 133)
&& (lc == 11 || lc == 12)) {
if (write_guest_abs(vcpu, ext_sa_addr + 1024,
&vcpu->run->s.regs.gscb, 32))
mci.gs = 0;
} else {
mci.gs = 0;
}
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
/* General interruption information */
KVM: s390: split store status and machine check handling Store status writes the prefix which is not to be done by a machine check. Also, the psw is stored and later on overwritten by the failing-storage address, which looks strange at first sight. Store status and machine check handling look similar, but they are actually two different things. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-03 17:18:57 +08:00
rc |= put_guest_lc(vcpu, 1, (u8 __user *) __LC_AR_MODE_ID);
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
rc |= write_guest_lc(vcpu, __LC_MCK_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_MCK_NEW_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: fix delivery of vector regs during machine checks Vector registers are only to be stored if the facility is available and if the guest has set up the machine check extended save area. If anything goes wrong while writing the vector registers, the vector registers are to be marked as invalid. Please note that we are allowed to write the registers although they are marked as invalid. Machine checks and "store status" SIGP orders are two different concepts, let's correctly separate these. As the SIGP part is completely handled in user space, we can drop it. This patch is based on a patch from Cornelia Huck. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:57:56 +08:00
rc |= put_guest_lc(vcpu, mci.val, (u64 __user *) __LC_MCCK_CODE);
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
/* Register-save areas */
KVM: s390: split store status and machine check handling Store status writes the prefix which is not to be done by a machine check. Also, the psw is stored and later on overwritten by the failing-storage address, which looks strange at first sight. Store status and machine check handling look similar, but they are actually two different things. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-03 17:18:57 +08:00
if (MACHINE_HAS_VX) {
convert_vx_to_fp(fprs, (__vector128 *) vcpu->run->s.regs.vrs);
rc |= write_guest_lc(vcpu, __LC_FPREGS_SAVE_AREA, fprs, 128);
} else {
rc |= write_guest_lc(vcpu, __LC_FPREGS_SAVE_AREA,
vcpu->run->s.regs.fprs, 128);
}
rc |= write_guest_lc(vcpu, __LC_GPREGS_SAVE_AREA,
vcpu->run->s.regs.gprs, 128);
rc |= put_guest_lc(vcpu, current->thread.fpu.fpc,
(u32 __user *) __LC_FP_CREG_SAVE_AREA);
rc |= put_guest_lc(vcpu, vcpu->arch.sie_block->todpr,
(u32 __user *) __LC_TOD_PROGREG_SAVE_AREA);
rc |= put_guest_lc(vcpu, kvm_s390_get_cpu_timer(vcpu),
(u64 __user *) __LC_CPU_TIMER_SAVE_AREA);
rc |= put_guest_lc(vcpu, vcpu->arch.sie_block->ckc >> 8,
(u64 __user *) __LC_CLOCK_COMP_SAVE_AREA);
rc |= write_guest_lc(vcpu, __LC_AREGS_SAVE_AREA,
&vcpu->run->s.regs.acrs, 64);
rc |= write_guest_lc(vcpu, __LC_CREGS_SAVE_AREA,
&vcpu->arch.sie_block->gcr, 128);
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
/* Extended interruption information */
KVM: s390: write external damage code on machine checks Let's also write the external damage code already provided by struct kvm_s390_mchk_info. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-03 18:25:08 +08:00
rc |= put_guest_lc(vcpu, mchk->ext_damage_code,
(u32 __user *) __LC_EXT_DAMAGE_CODE);
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
rc |= put_guest_lc(vcpu, mchk->failing_storage_address,
(u64 __user *) __LC_MCCK_FAIL_STOR_ADDR);
rc |= write_guest_lc(vcpu, __LC_PSW_SAVE_AREA, &mchk->fixed_logout,
sizeof(mchk->fixed_logout));
return rc ? -EFAULT : 0;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __must_check __deliver_machine_check(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct kvm_s390_mchk_info mchk = {};
int deliver = 0;
int rc = 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
spin_lock(&fi->lock);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
spin_lock(&li->lock);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (test_bit(IRQ_PEND_MCHK_EX, &li->pending_irqs) ||
test_bit(IRQ_PEND_MCHK_REP, &li->pending_irqs)) {
/*
* If there was an exigent machine check pending, then any
* repressible machine checks that might have been pending
* are indicated along with it, so always clear bits for
* repressible and exigent interrupts
*/
mchk = li->irq.mchk;
clear_bit(IRQ_PEND_MCHK_EX, &li->pending_irqs);
clear_bit(IRQ_PEND_MCHK_REP, &li->pending_irqs);
memset(&li->irq.mchk, 0, sizeof(mchk));
deliver = 1;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
/*
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
* We indicate floating repressible conditions along with
* other pending conditions. Channel Report Pending and Channel
* Subsystem damage are the only two and and are indicated by
* bits in mcic and masked in cr14.
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
*/
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (test_and_clear_bit(IRQ_PEND_MCHK_REP, &fi->pending_irqs)) {
mchk.mcic |= fi->mchk.mcic;
mchk.cr14 |= fi->mchk.cr14;
memset(&fi->mchk, 0, sizeof(mchk));
deliver = 1;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
spin_unlock(&li->lock);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
spin_unlock(&fi->lock);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (deliver) {
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 3, "deliver: machine check mcic 0x%llx",
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
mchk.mcic);
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
KVM_S390_MCHK,
mchk.cr14, mchk.mcic);
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
rc = __write_machine_check(vcpu, &mchk);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
}
KVM: s390: factor out actual delivery of machine checks Let's factor this out to prepare for bigger changes. Reorder to calls to match the logical order given in the PoP. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-14 22:47:36 +08:00
return rc;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
static int __must_check __deliver_restart(struct kvm_vcpu *vcpu)
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
int rc;
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 3, "%s", "deliver: cpu restart");
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
vcpu->stat.deliver_restart_signal++;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_RESTART, 0, 0);
rc = write_guest_lc(vcpu,
s390: rename struct _lowcore to struct lowcore Finally get rid of the leading underscore. I tried this already two or three years ago, however Michael Holzheu objected since this would break the crash utility (again). However Michael integrated support for the new name into the crash utility back then, so it doesn't break if the name will be changed now. So finally get rid of the ever confusing leading underscore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-31 17:29:00 +08:00
offsetof(struct lowcore, restart_old_psw),
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
s390: rename struct _lowcore to struct lowcore Finally get rid of the leading underscore. I tried this already two or three years ago, however Michael Holzheu objected since this would break the crash utility (again). However Michael integrated support for the new name into the crash utility back then, so it doesn't break if the name will be changed now. So finally get rid of the ever confusing leading underscore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-31 17:29:00 +08:00
rc |= read_guest_lc(vcpu, offsetof(struct lowcore, restart_psw),
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
clear_bit(IRQ_PEND_RESTART, &li->pending_irqs);
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __must_check __deliver_set_prefix(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
struct kvm_s390_prefix_info prefix;
spin_lock(&li->lock);
prefix = li->irq.prefix;
li->irq.prefix.address = 0;
clear_bit(IRQ_PEND_SET_PREFIX, &li->pending_irqs);
spin_unlock(&li->lock);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
vcpu->stat.deliver_prefix_signal++;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
KVM_S390_SIGP_SET_PREFIX,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
prefix.address, 0);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
kvm_s390_set_prefix(vcpu, prefix.address);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
return 0;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __must_check __deliver_emergency_signal(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
int rc;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
int cpu_addr;
spin_lock(&li->lock);
cpu_addr = find_first_bit(li->sigp_emerg_pending, KVM_MAX_VCPUS);
clear_bit(cpu_addr, li->sigp_emerg_pending);
if (bitmap_empty(li->sigp_emerg_pending, KVM_MAX_VCPUS))
clear_bit(IRQ_PEND_EXT_EMERGENCY, &li->pending_irqs);
spin_unlock(&li->lock);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 4, "%s", "deliver: sigp emerg");
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
vcpu->stat.deliver_emergency_signal++;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_INT_EMERGENCY,
cpu_addr, 0);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc = put_guest_lc(vcpu, EXT_IRQ_EMERGENCY_SIG,
(u16 *)__LC_EXT_INT_CODE);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, cpu_addr, (u16 *)__LC_EXT_CPU_ADDR);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __must_check __deliver_external_call(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
struct kvm_s390_extcall_info extcall;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
int rc;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
spin_lock(&li->lock);
extcall = li->irq.extcall;
li->irq.extcall.code = 0;
clear_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs);
spin_unlock(&li->lock);
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 4, "%s", "deliver: sigp ext call");
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
vcpu->stat.deliver_external_call++;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
KVM_S390_INT_EXTERNAL_CALL,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
extcall.code, 0);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc = put_guest_lc(vcpu, EXT_IRQ_EXTERNAL_CALL,
(u16 *)__LC_EXT_INT_CODE);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, extcall.code, (u16 *)__LC_EXT_CPU_ADDR);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &vcpu->arch.sie_block->gpsw,
sizeof(psw_t));
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __must_check __deliver_prog(struct kvm_vcpu *vcpu)
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
{
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
struct kvm_s390_pgm_info pgm_info;
KVM: s390: Nullify instruction for certain program exceptions When certain program exceptions (e.g. DAT access exceptions) occur, the current instruction has to be nullified, i.e. the old PSW that gets written into the low-core has to point to the beginning of the instruction again, and not to the beginning of the next instruction. Thus we have to rewind the PSW before writing it into the low-core. The list of nullifying exceptions can be found in the POP, chapter 6, figure 6-1 ("Interruption Action"). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-05 16:06:56 +08:00
int rc = 0, nullifying = false;
KVM: s390: migration / injection of prog irq ilc We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 23:33:33 +08:00
u16 ilen;
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
spin_lock(&li->lock);
pgm_info = li->irq.pgm;
clear_bit(IRQ_PEND_PROG, &li->pending_irqs);
memset(&li->irq.pgm, 0, sizeof(pgm_info));
spin_unlock(&li->lock);
KVM: s390: migration / injection of prog irq ilc We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 23:33:33 +08:00
ilen = pgm_info.flags & KVM_S390_PGM_FLAGS_ILC_MASK;
KVM: s390: PSW forwarding / rewinding / ilc rework We have some confusion about ilc vs. ilen in our current code. So let's correctly use the term ilen when dealing with (ilc << 1). Program irq injection didn't take care of the correct ilc in case of irqs triggered by EXECUTE functions, let's provide one function kvm_s390_get_ilen() to take care of all that. Also, manually specifying in intercept handlers the size of the instruction (and sometimes overwriting that value for EXECUTE internally) doesn't make too much sense. So also provide the functions: - kvm_s390_retry_instr to retry the currently intercepted instruction - kvm_s390_rewind_psw to rewind the PSW without internal overwrites - kvm_s390_forward_psw to forward the PSW Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 20:47:58 +08:00
VCPU_EVENT(vcpu, 3, "deliver: program irq code 0x%x, ilen:%d",
pgm_info.code, ilen);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
vcpu->stat.deliver_program_int++;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_PROGRAM_INT,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
pgm_info.code, 0);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
switch (pgm_info.code & ~PGM_PER) {
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
case PGM_AFX_TRANSLATION:
case PGM_ASX_TRANSLATION:
case PGM_EX_TRANSLATION:
case PGM_LFX_TRANSLATION:
case PGM_LSTE_SEQUENCE:
case PGM_LSX_TRANSLATION:
case PGM_LX_TRANSLATION:
case PGM_PRIMARY_AUTHORITY:
case PGM_SECONDARY_AUTHORITY:
KVM: s390: Nullify instruction for certain program exceptions When certain program exceptions (e.g. DAT access exceptions) occur, the current instruction has to be nullified, i.e. the old PSW that gets written into the low-core has to point to the beginning of the instruction again, and not to the beginning of the next instruction. Thus we have to rewind the PSW before writing it into the low-core. The list of nullifying exceptions can be found in the POP, chapter 6, figure 6-1 ("Interruption Action"). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-05 16:06:56 +08:00
nullifying = true;
/* fall through */
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
case PGM_SPACE_SWITCH:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = put_guest_lc(vcpu, pgm_info.trans_exc_code,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u64 *)__LC_TRANS_EXC_CODE);
break;
case PGM_ALEN_TRANSLATION:
case PGM_ALE_SEQUENCE:
case PGM_ASTE_INSTANCE:
case PGM_ASTE_SEQUENCE:
case PGM_ASTE_VALIDITY:
case PGM_EXTENDED_AUTHORITY:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = put_guest_lc(vcpu, pgm_info.exc_access_id,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u8 *)__LC_EXC_ACCESS_ID);
KVM: s390: Nullify instruction for certain program exceptions When certain program exceptions (e.g. DAT access exceptions) occur, the current instruction has to be nullified, i.e. the old PSW that gets written into the low-core has to point to the beginning of the instruction again, and not to the beginning of the next instruction. Thus we have to rewind the PSW before writing it into the low-core. The list of nullifying exceptions can be found in the POP, chapter 6, figure 6-1 ("Interruption Action"). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-05 16:06:56 +08:00
nullifying = true;
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
break;
case PGM_ASCE_TYPE:
case PGM_PAGE_TRANSLATION:
case PGM_REGION_FIRST_TRANS:
case PGM_REGION_SECOND_TRANS:
case PGM_REGION_THIRD_TRANS:
case PGM_SEGMENT_TRANSLATION:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = put_guest_lc(vcpu, pgm_info.trans_exc_code,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u64 *)__LC_TRANS_EXC_CODE);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.exc_access_id,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u8 *)__LC_EXC_ACCESS_ID);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.op_access_id,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u8 *)__LC_OP_ACCESS_ID);
KVM: s390: Nullify instruction for certain program exceptions When certain program exceptions (e.g. DAT access exceptions) occur, the current instruction has to be nullified, i.e. the old PSW that gets written into the low-core has to point to the beginning of the instruction again, and not to the beginning of the next instruction. Thus we have to rewind the PSW before writing it into the low-core. The list of nullifying exceptions can be found in the POP, chapter 6, figure 6-1 ("Interruption Action"). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-05 16:06:56 +08:00
nullifying = true;
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
break;
case PGM_MONITOR:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = put_guest_lc(vcpu, pgm_info.mon_class_nr,
KVM: s390: Fix size of monitor-class number field The monitor-class number field is only 16 bits, so we have to use a u16 pointer to access it. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> CC: stable@vger.kernel.org # v3.16+ Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-16 20:31:53 +08:00
(u16 *)__LC_MON_CLASS_NR);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.mon_code,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u64 *)__LC_MON_CODE);
break;
KVM: s390: Vector exceptions A new exception type for vector instructions is introduced with the new processor, but is handled exactly like a Data Exception which is already handled by the system. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-03 04:01:06 +08:00
case PGM_VECTOR_PROCESSING:
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
case PGM_DATA:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = put_guest_lc(vcpu, pgm_info.data_exc_code,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u32 *)__LC_DATA_EXC_CODE);
break;
case PGM_PROTECTION:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = put_guest_lc(vcpu, pgm_info.trans_exc_code,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u64 *)__LC_TRANS_EXC_CODE);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.exc_access_id,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u8 *)__LC_EXC_ACCESS_ID);
break;
KVM: s390: Nullify instruction for certain program exceptions When certain program exceptions (e.g. DAT access exceptions) occur, the current instruction has to be nullified, i.e. the old PSW that gets written into the low-core has to point to the beginning of the instruction again, and not to the beginning of the next instruction. Thus we have to rewind the PSW before writing it into the low-core. The list of nullifying exceptions can be found in the POP, chapter 6, figure 6-1 ("Interruption Action"). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-05 16:06:56 +08:00
case PGM_STACK_FULL:
case PGM_STACK_EMPTY:
case PGM_STACK_SPECIFICATION:
case PGM_STACK_TYPE:
case PGM_STACK_OPERATION:
case PGM_TRACE_TABEL:
case PGM_CRYPTO_OPERATION:
nullifying = true;
break;
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
if (pgm_info.code & PGM_PER) {
rc |= put_guest_lc(vcpu, pgm_info.per_code,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u8 *) __LC_PER_CODE);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.per_atmid,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u8 *)__LC_PER_ATMID);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.per_address,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u64 *) __LC_PER_ADDRESS);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.per_access_id,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u8 *) __LC_PER_ACCESS_ID);
}
KVM: s390: irq delivery should not rely on icptcode Program irq injection during program irq intercepts is the last candidates that injects nullifying irqs and relies on delivery to do the right thing. As we should not rely on the icptcode during any delivery (because that value will not be migrated), let's add a flag, telling prog IRQ delivery to not rewind the PSW in case of nullifying prog IRQs. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 23:46:55 +08:00
if (nullifying && !(pgm_info.flags & KVM_S390_PGM_FLAGS_NO_REWIND))
KVM: s390: PSW forwarding / rewinding / ilc rework We have some confusion about ilc vs. ilen in our current code. So let's correctly use the term ilen when dealing with (ilc << 1). Program irq injection didn't take care of the correct ilc in case of irqs triggered by EXECUTE functions, let's provide one function kvm_s390_get_ilen() to take care of all that. Also, manually specifying in intercept handlers the size of the instruction (and sometimes overwriting that value for EXECUTE internally) doesn't make too much sense. So also provide the functions: - kvm_s390_retry_instr to retry the currently intercepted instruction - kvm_s390_rewind_psw to rewind the PSW without internal overwrites - kvm_s390_forward_psw to forward the PSW Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 20:47:58 +08:00
kvm_s390_rewind_psw(vcpu, ilen);
KVM: s390: Nullify instruction for certain program exceptions When certain program exceptions (e.g. DAT access exceptions) occur, the current instruction has to be nullified, i.e. the old PSW that gets written into the low-core has to point to the beginning of the instruction again, and not to the beginning of the next instruction. Thus we have to rewind the PSW before writing it into the low-core. The list of nullifying exceptions can be found in the POP, chapter 6, figure 6-1 ("Interruption Action"). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-05 16:06:56 +08:00
KVM: s390: PSW forwarding / rewinding / ilc rework We have some confusion about ilc vs. ilen in our current code. So let's correctly use the term ilen when dealing with (ilc << 1). Program irq injection didn't take care of the correct ilc in case of irqs triggered by EXECUTE functions, let's provide one function kvm_s390_get_ilen() to take care of all that. Also, manually specifying in intercept handlers the size of the instruction (and sometimes overwriting that value for EXECUTE internally) doesn't make too much sense. So also provide the functions: - kvm_s390_retry_instr to retry the currently intercepted instruction - kvm_s390_rewind_psw to rewind the PSW without internal overwrites - kvm_s390_forward_psw to forward the PSW Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 20:47:58 +08:00
/* bit 1+2 of the target are the ilc, so we can directly use ilen */
rc |= put_guest_lc(vcpu, ilen, (u16 *) __LC_PGM_ILC);
KVM: s390: store the breaking-event address on pgm interrupts If the PER-3 facility is installed, the breaking-event address is to be stored in the low core. There is no facility bit for PER-3 in stfl(e) and Linux always uses the value at address 272 no matter if PER-3 is available or not. We can't hide its existence from the guest. All program interrupts injected via the SIE automatically store this information if the PER-3 facility is available in the hypervisor. Also the itdb contains the address automatically. As there is no switch to turn this mechanism off, let's simply make it consistent and also store the breaking event address in case of manual program interrupt injection. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-25 20:12:32 +08:00
rc |= put_guest_lc(vcpu, vcpu->arch.sie_block->gbea,
(u64 *) __LC_LAST_BREAK);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc |= put_guest_lc(vcpu, pgm_info.code,
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
(u16 *)__LC_PGM_INT_CODE);
rc |= write_guest_lc(vcpu, __LC_PGM_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_PGM_NEW_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static int __must_check __deliver_service(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
struct kvm_s390_ext_info ext;
int rc = 0;
spin_lock(&fi->lock);
if (!(test_bit(IRQ_PEND_EXT_SERVICE, &fi->pending_irqs))) {
spin_unlock(&fi->lock);
return 0;
}
ext = fi->srv_signal;
memset(&fi->srv_signal, 0, sizeof(ext));
clear_bit(IRQ_PEND_EXT_SERVICE, &fi->pending_irqs);
spin_unlock(&fi->lock);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 4, "deliver: sclp parameter 0x%x",
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
ext.ext_params);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
vcpu->stat.deliver_service_signal++;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_INT_SERVICE,
ext.ext_params, 0);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc = put_guest_lc(vcpu, EXT_IRQ_SERVICE_SIG, (u16 *)__LC_EXT_INT_CODE);
KVM: s390: some ext irqs have to clear the ext cpu addr The cpu address of a source cpu (responsible for an external irq) is only to be stored if bit 6 of the ext irq code is set. If bit 6 is not set, it is to be zeroed out. The special external irq code used for virtio and pfault uses the cpu addr as a parameter field. As bit 6 is set, this implementation is correct. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-01 19:02:44 +08:00
rc |= put_guest_lc(vcpu, 0, (u16 *)__LC_EXT_CPU_ADDR);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW,
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
rc |= put_guest_lc(vcpu, ext.ext_params,
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
(u32 *)__LC_EXT_PARAMS);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static int __must_check __deliver_pfault_done(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
struct kvm_s390_interrupt_info *inti;
int rc = 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
spin_lock(&fi->lock);
inti = list_first_entry_or_null(&fi->lists[FIRQ_LIST_PFAULT],
struct kvm_s390_interrupt_info,
list);
if (inti) {
list_del(&inti->list);
fi->counters[FIRQ_CNTR_PFAULT] -= 1;
}
if (list_empty(&fi->lists[FIRQ_LIST_PFAULT]))
clear_bit(IRQ_PEND_PFAULT_DONE, &fi->pending_irqs);
spin_unlock(&fi->lock);
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (inti) {
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
KVM_S390_INT_PFAULT_DONE, 0,
inti->ext.ext_params2);
VCPU_EVENT(vcpu, 4, "deliver: pfault done token 0x%llx",
inti->ext.ext_params2);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
rc = put_guest_lc(vcpu, EXT_IRQ_CP_SERVICE,
(u16 *)__LC_EXT_INT_CODE);
rc |= put_guest_lc(vcpu, PFAULT_DONE,
(u16 *)__LC_EXT_CPU_ADDR);
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw,
sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW,
&vcpu->arch.sie_block->gpsw,
sizeof(psw_t));
rc |= put_guest_lc(vcpu, inti->ext.ext_params2,
(u64 *)__LC_EXT_PARAMS2);
kfree(inti);
}
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static int __must_check __deliver_virtio(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
struct kvm_s390_interrupt_info *inti;
int rc = 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
spin_lock(&fi->lock);
inti = list_first_entry_or_null(&fi->lists[FIRQ_LIST_VIRTIO],
struct kvm_s390_interrupt_info,
list);
if (inti) {
VCPU_EVENT(vcpu, 4,
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
"deliver: virtio parm: 0x%x,parm64: 0x%llx",
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
inti->ext.ext_params, inti->ext.ext_params2);
vcpu->stat.deliver_virtio_interrupt++;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
inti->type,
inti->ext.ext_params,
inti->ext.ext_params2);
list_del(&inti->list);
fi->counters[FIRQ_CNTR_VIRTIO] -= 1;
}
if (list_empty(&fi->lists[FIRQ_LIST_VIRTIO]))
clear_bit(IRQ_PEND_VIRTIO, &fi->pending_irqs);
spin_unlock(&fi->lock);
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (inti) {
rc = put_guest_lc(vcpu, EXT_IRQ_CP_SERVICE,
(u16 *)__LC_EXT_INT_CODE);
rc |= put_guest_lc(vcpu, VIRTIO_PARAM,
(u16 *)__LC_EXT_CPU_ADDR);
rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW,
&vcpu->arch.sie_block->gpsw,
sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW,
&vcpu->arch.sie_block->gpsw,
sizeof(psw_t));
rc |= put_guest_lc(vcpu, inti->ext.ext_params,
(u32 *)__LC_EXT_PARAMS);
rc |= put_guest_lc(vcpu, inti->ext.ext_params2,
(u64 *)__LC_EXT_PARAMS2);
kfree(inti);
}
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
}
static int __must_check __deliver_io(struct kvm_vcpu *vcpu,
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
unsigned long irq_type)
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct list_head *isc_list;
struct kvm_s390_float_interrupt *fi;
struct kvm_s390_interrupt_info *inti = NULL;
int rc = 0;
KVM: s390: refactor interrupt delivery code Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 19:45:21 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
fi = &vcpu->kvm->arch.float_int;
KVM: s390: deliver program irq parameters and use correct ilc When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-03 17:55:13 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
spin_lock(&fi->lock);
isc_list = &fi->lists[irq_type - IRQ_PEND_IO_ISC_0];
inti = list_first_entry_or_null(isc_list,
struct kvm_s390_interrupt_info,
list);
if (inti) {
KVM: s390: fixup I/O interrupt traces We currently have two issues with the I/O interrupt injection logging: 1. All QEMU versions up to 2.6 have a wrong encoding of device numbers etc for the I/O interrupt type, so the inject VM_EVENT will have wrong data. Let's fix this by using the interrupt parameters and not the interrupt type number. 2. We only log in kvm_s390_inject_vm, but not when coming from kvm_s390_reinject_io_int or from flic. Let's move the logging to the common __inject_io function. We also enhance the logging for delivery to match the data. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-07 15:37:17 +08:00
if (inti->type & KVM_S390_INT_IO_AI_MASK)
VCPU_EVENT(vcpu, 4, "%s", "deliver: I/O (AI)");
else
VCPU_EVENT(vcpu, 4, "deliver: I/O %x ss %x schid %04x",
inti->io.subchannel_id >> 8,
inti->io.subchannel_id >> 1 & 0x3,
inti->io.subchannel_nr);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
vcpu->stat.deliver_io_int++;
trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
inti->type,
((__u32)inti->io.subchannel_id << 16) |
inti->io.subchannel_nr,
((__u64)inti->io.io_int_parm << 32) |
inti->io.io_int_word);
list_del(&inti->list);
fi->counters[FIRQ_CNTR_IO] -= 1;
}
if (list_empty(isc_list))
clear_bit(irq_type, &fi->pending_irqs);
spin_unlock(&fi->lock);
if (inti) {
rc = put_guest_lc(vcpu, inti->io.subchannel_id,
(u16 *)__LC_SUBCHANNEL_ID);
rc |= put_guest_lc(vcpu, inti->io.subchannel_nr,
(u16 *)__LC_SUBCHANNEL_NR);
rc |= put_guest_lc(vcpu, inti->io.io_int_parm,
(u32 *)__LC_IO_INT_PARM);
rc |= put_guest_lc(vcpu, inti->io.io_int_word,
(u32 *)__LC_IO_INT_WORD);
rc |= write_guest_lc(vcpu, __LC_IO_OLD_PSW,
&vcpu->arch.sie_block->gpsw,
sizeof(psw_t));
rc |= read_guest_lc(vcpu, __LC_IO_NEW_PSW,
&vcpu->arch.sie_block->gpsw,
sizeof(psw_t));
kfree(inti);
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: clean up return code handling in irq delivery code Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-02 00:05:39 +08:00
return rc ? -EFAULT : 0;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
}
typedef int (*deliver_irq_t)(struct kvm_vcpu *vcpu);
static const deliver_irq_t deliver_irq_funcs[] = {
[IRQ_PEND_MCHK_EX] = __deliver_machine_check,
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
[IRQ_PEND_MCHK_REP] = __deliver_machine_check,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
[IRQ_PEND_PROG] = __deliver_prog,
[IRQ_PEND_EXT_EMERGENCY] = __deliver_emergency_signal,
[IRQ_PEND_EXT_EXTERNAL] = __deliver_external_call,
[IRQ_PEND_EXT_CLOCK_COMP] = __deliver_ckc,
[IRQ_PEND_EXT_CPU_TIMER] = __deliver_cpu_timer,
[IRQ_PEND_RESTART] = __deliver_restart,
[IRQ_PEND_SET_PREFIX] = __deliver_set_prefix,
[IRQ_PEND_PFAULT_INIT] = __deliver_pfault_init,
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
[IRQ_PEND_EXT_SERVICE] = __deliver_service,
[IRQ_PEND_PFAULT_DONE] = __deliver_pfault_done,
[IRQ_PEND_VIRTIO] = __deliver_virtio,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
};
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
/* Check whether an external call is pending (deliverable or not) */
int kvm_s390_ext_call_pending(struct kvm_vcpu *vcpu)
KVM: s390: interpretive execution of SIGP EXTERNAL CALL If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-21 15:59:59 +08:00
{
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: interpretive execution of SIGP EXTERNAL CALL If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-21 15:59:59 +08:00
s390/sclp: unify basic sclp access by exposing "struct sclp" Let's unify basic access to sclp fields by storing the data in an external struct in asm/sclp.h. The values can now directly be accessed by other components, so there is no need for most accessor functions and external variables anymore. The mtid, mtid_max and facility part will be cleaned up separately. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-06 19:18:59 +08:00
if (!sclp.has_sigpif)
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
return test_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs);
KVM: s390: interpretive execution of SIGP EXTERNAL CALL If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-21 15:59:59 +08:00
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
return sca_ext_call_pending(vcpu, NULL);
KVM: s390: interpretive execution of SIGP EXTERNAL CALL If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-21 15:59:59 +08:00
}
KVM: s390: a VCPU may only stop when no interrupts are left pending As a SIGP STOP is an interrupt with the least priority, it may only result in stop of the vcpu when no other interrupts are left pending. To detect whether a non-stop irq is pending, we need a way to mask out stop irqs from the general kvm_cpu_has_interrupt() function. For this reason, the existing function (with an outdated name) is replaced by kvm_s390_vcpu_has_irq() which allows to mask out pending stop irqs. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-05 23:40:47 +08:00
int kvm_s390_vcpu_has_irq(struct kvm_vcpu *vcpu, int exclude_stop)
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
{
KVM: s390: drop out early in kvm_s390_has_irq() Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-06 19:51:29 +08:00
if (deliverable_irqs(vcpu))
return 1;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: drop out early in kvm_s390_has_irq() Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-06 19:51:29 +08:00
if (kvm_cpu_has_pending_timer(vcpu))
return 1;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
/* external call pending and deliverable */
KVM: s390: drop out early in kvm_s390_has_irq() Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-06 19:51:29 +08:00
if (kvm_s390_ext_call_pending(vcpu) &&
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
!psw_extint_disabled(vcpu) &&
(vcpu->arch.sie_block->gcr[0] & 0x2000ul))
KVM: s390: drop out early in kvm_s390_has_irq() Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-06 19:51:29 +08:00
return 1;
KVM: s390: interpretive execution of SIGP EXTERNAL CALL If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-21 15:59:59 +08:00
KVM: s390: drop out early in kvm_s390_has_irq() Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-06 19:51:29 +08:00
if (!exclude_stop && kvm_s390_is_stop_irq_pending(vcpu))
return 1;
return 0;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: hlt emulation should take in-kernel APIC/PIT timers into account Timers that fire between guest hlt and vcpu_block's add_wait_queue() are ignored, possibly resulting in hangs. Also make sure that atomic_inc and waitqueue_active tests happen in the specified order, otherwise the following race is open: CPU0 CPU1 if (waitqueue_active(wq)) add_wait_queue() if (!atomic_read(pit_timer->pending)) schedule() atomic_inc(pit_timer->pending) Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-12 01:53:26 +08:00
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
KVM: s390: cpu timer irq priority We now have a mechanism for delivering interrupts according to their priority. Let's inject them using our new infrastructure (instead of letting only hardware handle them), so we can be sure that the irq priorities are satisfied. For s390, the cpu timer and the clock comparator are to be checked for common code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when the guest is being executed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-01 22:55:42 +08:00
return ckc_irq_pending(vcpu) || cpu_timer_irq_pending(vcpu);
KVM: hlt emulation should take in-kernel APIC/PIT timers into account Timers that fire between guest hlt and vcpu_block's add_wait_queue() are ignored, possibly resulting in hangs. Also make sure that atomic_inc and waitqueue_active tests happen in the specified order, otherwise the following race is open: CPU0 CPU1 if (waitqueue_active(wq)) add_wait_queue() if (!atomic_read(pit_timer->pending)) schedule() atomic_inc(pit_timer->pending) Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-12 01:53:26 +08:00
}
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
static u64 __calculate_sltime(struct kvm_vcpu *vcpu)
{
u64 now, cputm, sltime = 0;
if (ckc_interrupts_enabled(vcpu)) {
now = kvm_s390_get_tod_clock_fast(vcpu->kvm);
sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
/* already expired or overflow? */
if (!sltime || vcpu->arch.sie_block->ckc <= now)
return 0;
if (cpu_timer_interrupts_enabled(vcpu)) {
cputm = kvm_s390_get_cpu_timer(vcpu);
/* already expired? */
if (cputm >> 63)
return 0;
return min(sltime, tod_to_ns(cputm));
}
} else if (cpu_timer_interrupts_enabled(vcpu)) {
sltime = kvm_s390_get_cpu_timer(vcpu);
/* already expired? */
if (sltime >> 63)
return 0;
}
return sltime;
}
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
{
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
u64 sltime;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
vcpu->stat.exit_wait_state++;
KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block This patch cleans up the code in handle_wait by reusing the common code function kvm_vcpu_block. signal_pending(), kvm_cpu_has_pending_timer() and kvm_arch_vcpu_runnable() are sufficient for checking if we need to wake-up that VCPU. kvm_vcpu_block uses these functions, so no checks are lost. The flag "timer_due" can be removed - kvm_cpu_has_pending_timer() tests whether the timer is pending, thus the vcpu is correctly woken up. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-13 22:54:32 +08:00
/* fast path */
KVM: s390: kvm_arch_vcpu_runnable already cares about timer interrupts We can remove that double check. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-23 18:25:15 +08:00
if (kvm_arch_vcpu_runnable(vcpu))
KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block This patch cleans up the code in handle_wait by reusing the common code function kvm_vcpu_block. signal_pending(), kvm_cpu_has_pending_timer() and kvm_arch_vcpu_runnable() are sufficient for checking if we need to wake-up that VCPU. kvm_vcpu_block uses these functions, so no checks are lost. The flag "timer_due" can be removed - kvm_cpu_has_pending_timer() tests whether the timer is pending, thus the vcpu is correctly woken up. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-13 22:54:32 +08:00
return 0;
KVM: s390: Fix race condition in kvm_s390_handle_wait The call to add_timer was issued before local_int.lock was taken and before timer_due was set to 0. If the timer expires before the lock is being taken, the timer function will set timer_due to 1 and exit before the vcpu falls asleep. Depending on other external events, the vcpu might sleep forever. This fix pulls setting timer_due to the beginning of the function before add_timer, which ensures correct behavior. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-21 19:37:44 +08:00
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
if (psw_interrupts_disabled(vcpu)) {
VCPU_EVENT(vcpu, 3, "%s", "disabled wait");
[S390] Replace ENOTSUPP usage with EOPNOTSUPP ENOTSUPP is not supposed to leak to userspace so lets just use EOPNOTSUPP everywhere. Doesn't fix a bug, but makes future reviews easier. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-27 05:37:41 +08:00
return -EOPNOTSUPP; /* disabled wait */
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
if (!ckc_interrupts_enabled(vcpu) &&
!cpu_timer_interrupts_enabled(vcpu)) {
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
VCPU_EVENT(vcpu, 3, "%s", "enabled wait w/o timer");
KVM: s390: prevent sleep duration underflows in handle_wait() We sometimes get an underflow for the sleep duration, which most likely won't result in the short sleep time we wanted. So let's check for sleep duration underflows and directly continue to run the guest if we get one. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-12 19:26:40 +08:00
__set_cpu_idle(vcpu);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
goto no_timer;
}
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
sltime = __calculate_sltime(vcpu);
if (!sltime)
KVM: s390: prevent sleep duration underflows in handle_wait() We sometimes get an underflow for the sleep duration, which most likely won't result in the short sleep time we wanted. So let's check for sleep duration underflows and directly continue to run the guest if we get one. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-12 19:26:40 +08:00
return 0;
__set_cpu_idle(vcpu);
ktime: Cleanup ktime_set() usage ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 19:30:41 +08:00
hrtimer_start(&vcpu->arch.ckc_timer, sltime, HRTIMER_MODE_REL);
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
VCPU_EVENT(vcpu, 4, "enabled wait: %llu ns", sltime);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
no_timer:
KVM: s390: Lock kvm->srcu at the appropriate places The kvm->srcu lock has to be held while accessing the memory of guests and during certain other actions. This patch now adds the locks to the __vcpu_run function so that all affected code is protected now (and additionally to the KVM_S390_STORE_STATUS ioctl, which can be called out-of-band and needs a separate lock). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 16:33:45 +08:00
srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block This patch cleans up the code in handle_wait by reusing the common code function kvm_vcpu_block. signal_pending(), kvm_cpu_has_pending_timer() and kvm_arch_vcpu_runnable() are sufficient for checking if we need to wake-up that VCPU. kvm_vcpu_block uses these functions, so no checks are lost. The flag "timer_due" can be removed - kvm_cpu_has_pending_timer() tests whether the timer is pending, thus the vcpu is correctly woken up. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-13 22:54:32 +08:00
kvm_vcpu_block(vcpu);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
__unset_cpu_idle(vcpu);
KVM: s390: Lock kvm->srcu at the appropriate places The kvm->srcu lock has to be held while accessing the memory of guests and during certain other actions. This patch now adds the locks to the __vcpu_run function so that all affected code is protected now (and additionally to the KVM_S390_STORE_STATUS ioctl, which can be called out-of-band and needs a separate lock). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 16:33:45 +08:00
vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
KVM: s390: forward hrtimer if guest ckc not pending yet Patch 0759d0681cae ("KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block") changed the way pending guest clock comparator interrupts are detected. It was assumed that as soon as the hrtimer wakes up, the condition for the guest ckc is satisfied. This is however only true as long as adjclock() doesn't speed up the monotonic clock. Reason is that the hrtimer is based on CLOCK_MONOTONIC, the guest clock comparator detection is based on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the TOD clock, the hrtimer wakes the target VCPU up too early and the target VCPU will not detect any pending interrupts, therefore going back to sleep. It will never be woken up again because the hrtimer has finished. The VCPU is stuck. As a quick fix, we have to forward the hrtimer until the guest clock comparator is really due, to guarantee properly timed wake ups. As the hrtimer callback might be triggered on another cpu, we have to make sure that the timer is really stopped and not currently executing the callback on another cpu. This can happen if the vcpu thread is scheduled onto another physical cpu, but the timer base is not migrated. So lets use hrtimer_cancel instead of try_to_cancel. A proper fix might be to introduce a RAW based hrtimer. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-11 17:18:01 +08:00
hrtimer_cancel(&vcpu->arch.ckc_timer);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
return 0;
}
KVM: s390: move vcpu wakeup code to a central point Let's move the vcpu wakeup code to a central point. We should set the vcpu->preempted flag only if the target is actually sleeping and before the real wakeup happens. Otherwise the preempted flag might be set, when not necessary. This may result in immediate reschedules after schedule() in some scenarios. The wakeup code doesn't require the local_int.lock to be held. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 17:59:46 +08:00
void kvm_s390_vcpu_wakeup(struct kvm_vcpu *vcpu)
{
KVM: halt_polling: provide a way to qualify wakeups during poll Some wakeups should not be considered a sucessful poll. For example on s390 I/O interrupts are usually floating, which means that _ALL_ CPUs would be considered runnable - letting all vCPUs poll all the time for transactional like workload, even if one vCPU would be enough. This can result in huge CPU usage for large guests. This patch lets architectures provide a way to qualify wakeups if they should be considered a good/bad wakeups in regard to polls. For s390 the implementation will fence of halt polling for anything but known good, single vCPU events. The s390 implementation for floating interrupts does a wakeup for one vCPU, but the interrupt will be delivered by whatever CPU checks first for a pending interrupt. We prefer the woken up CPU by marking the poll of this CPU as "good" poll. This code will also mark several other wakeup reasons like IPI or expired timers as "good". This will of course also mark some events as not sucessful. As KVM on z runs always as a 2nd level hypervisor, we prefer to not poll, unless we are really sure, though. This patch successfully limits the CPU usage for cases like uperf 1byte transactional ping pong workload or wakeup heavy workload like OLTP while still providing a proper speedup. This also introduced a new vcpu stat "halt_poll_no_tuning" that marks wakeups that are considered not good for polling. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Radim Krčmář <rkrcmar@redhat.com> (for an earlier version) Cc: David Matlack <dmatlack@google.com> Cc: Wanpeng Li <kernellwp@gmail.com> [Rename config symbol. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-13 18:16:35 +08:00
/*
* We cannot move this into the if, as the CPU might be already
* in kvm_vcpu_block without having the waitqueue set (polling)
*/
vcpu->valid_wakeup = true;
KVM: Use simple waitqueue for vcpu->wq The problem: On -rt, an emulated LAPIC timer instances has the following path: 1) hard interrupt 2) ksoftirqd is scheduled 3) ksoftirqd wakes up vcpu thread 4) vcpu thread is scheduled This extra context switch introduces unnecessary latency in the LAPIC path for a KVM guest. The solution: Allow waking up vcpu thread from hardirq context, thus avoiding the need for ksoftirqd to be scheduled. Normal waitqueues make use of spinlocks, which on -RT are sleepable locks. Therefore, waking up a waitqueue waiter involves locking a sleeping lock, which is not allowed from hard interrupt context. cyclictest command line: This patch reduces the average latency in my tests from 14us to 11us. Daniel writes: Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency benchmark on mainline. The test was run 1000 times on tip/sched/core 4.4.0-rc8-01134-g0905f04: ./x86-run x86/tscdeadline_latency.flat -cpu host with idle=poll. The test seems not to deliver really stable numbers though most of them are smaller. Paolo write: "Anything above ~10000 cycles means that the host went to C1 or lower---the number means more or less nothing in that case. The mean shows an improvement indeed." Before: min max mean std count 1000.000000 1000.000000 1000.000000 1000.000000 mean 5162.596000 2019270.084000 5824.491541 20681.645558 std 75.431231 622607.723969 89.575700 6492.272062 min 4466.000000 23928.000000 5537.926500 585.864966 25% 5163.000000 1613252.750000 5790.132275 16683.745433 50% 5175.000000 2281919.000000 5834.654000 23151.990026 75% 5190.000000 2382865.750000 5861.412950 24148.206168 max 5228.000000 4175158.000000 6254.827300 46481.048691 After min max mean std count 1000.000000 1000.00000 1000.000000 1000.000000 mean 5143.511000 2076886.10300 5813.312474 21207.357565 std 77.668322 610413.09583 86.541500 6331.915127 min 4427.000000 25103.00000 5529.756600 559.187707 25% 5148.000000 1691272.75000 5784.889825 17473.518244 50% 5160.000000 2308328.50000 5832.025000 23464.837068 75% 5172.000000 2393037.75000 5853.177675 24223.969976 max 5222.000000 3922458.00000 6186.720500 42520.379830 [Patch was originaly based on the swait implementation found in the -rt tree. Daniel ported it to mainline's version and gathered the benchmark numbers for tscdeadline_latency test.] Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 16:46:39 +08:00
if (swait_active(&vcpu->wq)) {
KVM: s390: move vcpu wakeup code to a central point Let's move the vcpu wakeup code to a central point. We should set the vcpu->preempted flag only if the target is actually sleeping and before the real wakeup happens. Otherwise the preempted flag might be set, when not necessary. This may result in immediate reschedules after schedule() in some scenarios. The wakeup code doesn't require the local_int.lock to be held. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 17:59:46 +08:00
/*
* The vcpu gave up the cpu voluntarily, mark it as a good
* yield-candidate.
*/
vcpu->preempted = true;
KVM: Use simple waitqueue for vcpu->wq The problem: On -rt, an emulated LAPIC timer instances has the following path: 1) hard interrupt 2) ksoftirqd is scheduled 3) ksoftirqd wakes up vcpu thread 4) vcpu thread is scheduled This extra context switch introduces unnecessary latency in the LAPIC path for a KVM guest. The solution: Allow waking up vcpu thread from hardirq context, thus avoiding the need for ksoftirqd to be scheduled. Normal waitqueues make use of spinlocks, which on -RT are sleepable locks. Therefore, waking up a waitqueue waiter involves locking a sleeping lock, which is not allowed from hard interrupt context. cyclictest command line: This patch reduces the average latency in my tests from 14us to 11us. Daniel writes: Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency benchmark on mainline. The test was run 1000 times on tip/sched/core 4.4.0-rc8-01134-g0905f04: ./x86-run x86/tscdeadline_latency.flat -cpu host with idle=poll. The test seems not to deliver really stable numbers though most of them are smaller. Paolo write: "Anything above ~10000 cycles means that the host went to C1 or lower---the number means more or less nothing in that case. The mean shows an improvement indeed." Before: min max mean std count 1000.000000 1000.000000 1000.000000 1000.000000 mean 5162.596000 2019270.084000 5824.491541 20681.645558 std 75.431231 622607.723969 89.575700 6492.272062 min 4466.000000 23928.000000 5537.926500 585.864966 25% 5163.000000 1613252.750000 5790.132275 16683.745433 50% 5175.000000 2281919.000000 5834.654000 23151.990026 75% 5190.000000 2382865.750000 5861.412950 24148.206168 max 5228.000000 4175158.000000 6254.827300 46481.048691 After min max mean std count 1000.000000 1000.00000 1000.000000 1000.000000 mean 5143.511000 2076886.10300 5813.312474 21207.357565 std 77.668322 610413.09583 86.541500 6331.915127 min 4427.000000 25103.00000 5529.756600 559.187707 25% 5148.000000 1691272.75000 5784.889825 17473.518244 50% 5160.000000 2308328.50000 5832.025000 23464.837068 75% 5172.000000 2393037.75000 5853.177675 24223.969976 max 5222.000000 3922458.00000 6186.720500 42520.379830 [Patch was originaly based on the swait implementation found in the -rt tree. Daniel ported it to mainline's version and gathered the benchmark numbers for tscdeadline_latency test.] Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 16:46:39 +08:00
swake_up(&vcpu->wq);
KVM: s390: count vcpu wakeups in stat.halt_wakeup This patch introduces the halt_wakeup counter used by common code and uses it to count vcpu wakeups done in s390 arch specific code. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-11 16:00:43 +08:00
vcpu->stat.halt_wakeup++;
KVM: s390: move vcpu wakeup code to a central point Let's move the vcpu wakeup code to a central point. We should set the vcpu->preempted flag only if the target is actually sleeping and before the real wakeup happens. Otherwise the preempted flag might be set, when not necessary. This may result in immediate reschedules after schedule() in some scenarios. The wakeup code doesn't require the local_int.lock to be held. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 17:59:46 +08:00
}
KVM: s390: vsie: speed up VCPU irq delivery when handling vsie Whenever we want to wake up a VCPU (e.g. when injecting an IRQ), we have to kick it out of vsie, so the request will be handled faster. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-05-28 04:03:52 +08:00
/*
* The VCPU might not be sleeping but is executing the VSIE. Let's
* kick it, so it leaves the SIE to process the request.
*/
kvm_s390_vsie_kick(vcpu);
KVM: s390: move vcpu wakeup code to a central point Let's move the vcpu wakeup code to a central point. We should set the vcpu->preempted flag only if the target is actually sleeping and before the real wakeup happens. Otherwise the preempted flag might be set, when not necessary. This may result in immediate reschedules after schedule() in some scenarios. The wakeup code doesn't require the local_int.lock to be held. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 17:59:46 +08:00
}
KVM: s390: use hrtimer for clock wakeup from idle - v2 This patch reworks the s390 clock comparator wakeup to hrtimer. The clock comparator is a per-cpu value that is compared against the TOD clock. If ckc <= TOD an external interrupt 1004 is triggered. Since the clock comparator and the TOD clock have a much higher resolution than jiffies we should use hrtimers to trigger the wakeup. This speeds up guest nanosleep for small values. Since hrtimers callbacks run in hard-irq context, I added a tasklet to do the actual work with enabled interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-12 23:21:49 +08:00
enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer)
{
struct kvm_vcpu *vcpu;
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
u64 sltime;
KVM: s390: use hrtimer for clock wakeup from idle - v2 This patch reworks the s390 clock comparator wakeup to hrtimer. The clock comparator is a per-cpu value that is compared against the TOD clock. If ckc <= TOD an external interrupt 1004 is triggered. Since the clock comparator and the TOD clock have a much higher resolution than jiffies we should use hrtimers to trigger the wakeup. This speeds up guest nanosleep for small values. Since hrtimers callbacks run in hard-irq context, I added a tasklet to do the actual work with enabled interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-12 23:21:49 +08:00
vcpu = container_of(timer, struct kvm_vcpu, arch.ckc_timer);
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
sltime = __calculate_sltime(vcpu);
KVM: s390: use hrtimer for clock wakeup from idle - v2 This patch reworks the s390 clock comparator wakeup to hrtimer. The clock comparator is a per-cpu value that is compared against the TOD clock. If ckc <= TOD an external interrupt 1004 is triggered. Since the clock comparator and the TOD clock have a much higher resolution than jiffies we should use hrtimers to trigger the wakeup. This speeds up guest nanosleep for small values. Since hrtimers callbacks run in hard-irq context, I added a tasklet to do the actual work with enabled interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-12 23:21:49 +08:00
KVM: s390: forward hrtimer if guest ckc not pending yet Patch 0759d0681cae ("KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block") changed the way pending guest clock comparator interrupts are detected. It was assumed that as soon as the hrtimer wakes up, the condition for the guest ckc is satisfied. This is however only true as long as adjclock() doesn't speed up the monotonic clock. Reason is that the hrtimer is based on CLOCK_MONOTONIC, the guest clock comparator detection is based on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the TOD clock, the hrtimer wakes the target VCPU up too early and the target VCPU will not detect any pending interrupts, therefore going back to sleep. It will never be woken up again because the hrtimer has finished. The VCPU is stuck. As a quick fix, we have to forward the hrtimer until the guest clock comparator is really due, to guarantee properly timed wake ups. As the hrtimer callback might be triggered on another cpu, we have to make sure that the timer is really stopped and not currently executing the callback on another cpu. This can happen if the vcpu thread is scheduled onto another physical cpu, but the timer base is not migrated. So lets use hrtimer_cancel instead of try_to_cancel. A proper fix might be to introduce a RAW based hrtimer. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-11 17:18:01 +08:00
/*
* If the monotonic clock runs faster than the tod clock we might be
* woken up too early and have to go back to sleep to avoid deadlocks.
*/
KVM: s390: wake up when the VCPU cpu timer expires When the VCPU cpu timer expires, we have to wake up just like when the ckc triggers. For now, setting up a cpu timer in the guest and going into enabled wait will never lead to a wakeup. This patch fixes this problem. Just as for the ckc, we have to take care of waking up too early. We have to recalculate the sleep time and go back to sleep. Please note that the timer callback calls kvm_s390_get_cpu_timer() from interrupt context. As the timer is canceled when leaving handle_wait(), and we don't do any VCPU cpu timer writes/updates in that function, we can be sure that we will never try to read the VCPU cpu timer from the same cpu that is currentyl updating the timer (deadlock). Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-22 21:14:50 +08:00
if (sltime && hrtimer_forward_now(timer, ns_to_ktime(sltime)))
KVM: s390: forward hrtimer if guest ckc not pending yet Patch 0759d0681cae ("KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block") changed the way pending guest clock comparator interrupts are detected. It was assumed that as soon as the hrtimer wakes up, the condition for the guest ckc is satisfied. This is however only true as long as adjclock() doesn't speed up the monotonic clock. Reason is that the hrtimer is based on CLOCK_MONOTONIC, the guest clock comparator detection is based on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the TOD clock, the hrtimer wakes the target VCPU up too early and the target VCPU will not detect any pending interrupts, therefore going back to sleep. It will never be woken up again because the hrtimer has finished. The VCPU is stuck. As a quick fix, we have to forward the hrtimer until the guest clock comparator is really due, to guarantee properly timed wake ups. As the hrtimer callback might be triggered on another cpu, we have to make sure that the timer is really stopped and not currently executing the callback on another cpu. This can happen if the vcpu thread is scheduled onto another physical cpu, but the timer base is not migrated. So lets use hrtimer_cancel instead of try_to_cancel. A proper fix might be to introduce a RAW based hrtimer. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-11 17:18:01 +08:00
return HRTIMER_RESTART;
kvm_s390_vcpu_wakeup(vcpu);
KVM: s390: use hrtimer for clock wakeup from idle - v2 This patch reworks the s390 clock comparator wakeup to hrtimer. The clock comparator is a per-cpu value that is compared against the TOD clock. If ckc <= TOD an external interrupt 1004 is triggered. Since the clock comparator and the TOD clock have a much higher resolution than jiffies we should use hrtimers to trigger the wakeup. This speeds up guest nanosleep for small values. Since hrtimers callbacks run in hard-irq context, I added a tasklet to do the actual work with enabled interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-12 23:21:49 +08:00
return HRTIMER_NORESTART;
}
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: clear local interrupts at cpu initial reset Empty list of local interrupts when vcpu goes through initial reset to provide a clean state Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-11 20:48:07 +08:00
void kvm_s390_clear_local_irqs(struct kvm_vcpu *vcpu)
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: remove _bh locking from local_int.lock local_int.lock is not used in a bottom-half handler anymore, therefore we can turn it into an ordinary spin_lock at all occurrences. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 16:23:53 +08:00
spin_lock(&li->lock);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
li->pending_irqs = 0;
bitmap_zero(li->sigp_emerg_pending, KVM_MAX_VCPUS);
memset(&li->irq, 0, sizeof(li->irq));
KVM: s390: remove _bh locking from local_int.lock local_int.lock is not used in a bottom-half handler anymore, therefore we can turn it into an ordinary spin_lock at all occurrences. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 16:23:53 +08:00
spin_unlock(&li->lock);
KVM: s390: interpretive execution of SIGP EXTERNAL CALL If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-21 15:59:59 +08:00
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
sca_clear_ext_call(vcpu);
KVM: s390: clear local interrupts at cpu initial reset Empty list of local interrupts when vcpu goes through initial reset to provide a clean state Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-11 20:48:07 +08:00
}
KVM: s390: add __must_check to interrupt deliver functions We now propagate interrupt injection errors back to the ioctl. We should mark functions that might fail with __must_check. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2014-08-25 18:27:29 +08:00
int __must_check kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
{
KVM: s390: rename private structures While doing some tests with our lcrash implementation I have seen a naming conflict with prefix_info in kvm_host.h vs. addrconf.h To avoid future conflicts lets rename private definitions in asm/kvm_host.h by adding the kvm_s390 prefix. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-27 21:05:40 +08:00
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
deliver_irq_t func;
KVM: s390: return -EFAULT if lowcore is not mapped during irq delivery Currently we just kill the userspace process and exit the thread immediatly without making sure that we don't hold any locks etc. Improve this by making KVM_RUN return -EFAULT if the lowcore is not mapped during interrupt delivery. To achieve this we need to pass the return code of guest memory access routines used in interrupt delivery all the way back to the KVM_RUN ioctl. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-17 16:10:30 +08:00
int rc = 0;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
unsigned long irq_type;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
unsigned long irqs;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
__reset_intercept_indicators(vcpu);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
/* pending ckc conditions might have been invalidated */
clear_bit(IRQ_PEND_EXT_CLOCK_COMP, &li->pending_irqs);
KVM: s390: cpu timer irq priority We now have a mechanism for delivering interrupts according to their priority. Let's inject them using our new infrastructure (instead of letting only hardware handle them), so we can be sure that the irq priorities are satisfied. For s390, the cpu timer and the clock comparator are to be checked for common code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when the guest is being executed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-01 22:55:42 +08:00
if (ckc_irq_pending(vcpu))
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
set_bit(IRQ_PEND_EXT_CLOCK_COMP, &li->pending_irqs);
KVM: s390: cpu timer irq priority We now have a mechanism for delivering interrupts according to their priority. Let's inject them using our new infrastructure (instead of letting only hardware handle them), so we can be sure that the irq priorities are satisfied. For s390, the cpu timer and the clock comparator are to be checked for common code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when the guest is being executed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-01 22:55:42 +08:00
/* pending cpu timer conditions might have been invalidated */
clear_bit(IRQ_PEND_EXT_CPU_TIMER, &li->pending_irqs);
if (cpu_timer_irq_pending(vcpu))
set_bit(IRQ_PEND_EXT_CPU_TIMER, &li->pending_irqs);
KVM: s390: optimize interrupt handling round trip time We can avoid checking guest control registers and guest PSW as well as all the masking and calculations on the interrupt masks when no interrupts are pending. Also, the check for IRQ_PEND_COUNT can be removed, because we won't enter the while loop if no interrupts are pending and invalid interrupt types can't be injected. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-17 16:21:04 +08:00
while ((irqs = deliverable_irqs(vcpu)) && !rc) {
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
/* bits are in the order of interrupt priority */
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
irq_type = find_first_bit(&irqs, IRQ_PEND_COUNT);
if (is_ioirq(irq_type)) {
rc = __deliver_io(vcpu, irq_type);
} else {
func = deliver_irq_funcs[irq_type];
if (!func) {
WARN_ON_ONCE(func == NULL);
clear_bit(irq_type, &li->pending_irqs);
continue;
}
rc = func(vcpu);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
}
KVM: s390: optimize interrupt handling round trip time We can avoid checking guest control registers and guest PSW as well as all the masking and calculations on the interrupt masks when no interrupts are pending. Also, the check for IRQ_PEND_COUNT can be removed, because we won't enter the while loop if no interrupts are pending and invalid interrupt types can't be injected. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-17 16:21:04 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
set_intercept_indicators(vcpu);
KVM: s390: return -EFAULT if lowcore is not mapped during irq delivery Currently we just kill the userspace process and exit the thread immediatly without making sure that we don't hold any locks etc. Improve this by making KVM_RUN return -EFAULT if the lowcore is not mapped during interrupt delivery. To achieve this we need to pass the return code of guest memory access routines used in interrupt delivery all the way back to the KVM_RUN ioctl. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-17 16:10:30 +08:00
return rc;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __inject_prog(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
VCPU_EVENT(vcpu, 3, "inject: program irq code 0x%x", irq->u.pgm.code);
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_PROGRAM_INT,
irq->u.pgm.code, 0);
KVM: s390: migration / injection of prog irq ilc We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 23:33:33 +08:00
if (!(irq->u.pgm.flags & KVM_S390_PGM_FLAGS_ILC_VALID)) {
/* auto detection if no valid ILC was given */
irq->u.pgm.flags &= ~KVM_S390_PGM_FLAGS_ILC_MASK;
irq->u.pgm.flags |= kvm_s390_get_ilen(vcpu);
irq->u.pgm.flags |= KVM_S390_PGM_FLAGS_ILC_VALID;
}
KVM: s390: correctly handle injection of pgm irqs and per events PER events can always co-exist with other program interrupts. For now, we always overwrite all program interrupt parameters when injecting any type of program interrupt. Let's handle that correctly by only overwriting the relevant portion of the program interrupt parameters. Therefore we can now inject PER events and ordinary program interrupts concurrently, resulting in no loss of program interrupts. This will especially by helpful when manually detecting PER events later - as both types might be triggered during one SIE exit. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-04 18:38:48 +08:00
if (irq->u.pgm.code == PGM_PER) {
li->irq.pgm.code |= PGM_PER;
KVM: s390: migration / injection of prog irq ilc We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 23:33:33 +08:00
li->irq.pgm.flags = irq->u.pgm.flags;
KVM: s390: correctly handle injection of pgm irqs and per events PER events can always co-exist with other program interrupts. For now, we always overwrite all program interrupt parameters when injecting any type of program interrupt. Let's handle that correctly by only overwriting the relevant portion of the program interrupt parameters. Therefore we can now inject PER events and ordinary program interrupts concurrently, resulting in no loss of program interrupts. This will especially by helpful when manually detecting PER events later - as both types might be triggered during one SIE exit. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-04 18:38:48 +08:00
/* only modify PER related information */
li->irq.pgm.per_address = irq->u.pgm.per_address;
li->irq.pgm.per_code = irq->u.pgm.per_code;
li->irq.pgm.per_atmid = irq->u.pgm.per_atmid;
li->irq.pgm.per_access_id = irq->u.pgm.per_access_id;
} else if (!(irq->u.pgm.code & PGM_PER)) {
li->irq.pgm.code = (li->irq.pgm.code & PGM_PER) |
irq->u.pgm.code;
KVM: s390: migration / injection of prog irq ilc We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-04 23:33:33 +08:00
li->irq.pgm.flags = irq->u.pgm.flags;
KVM: s390: correctly handle injection of pgm irqs and per events PER events can always co-exist with other program interrupts. For now, we always overwrite all program interrupt parameters when injecting any type of program interrupt. Let's handle that correctly by only overwriting the relevant portion of the program interrupt parameters. Therefore we can now inject PER events and ordinary program interrupts concurrently, resulting in no loss of program interrupts. This will especially by helpful when manually detecting PER events later - as both types might be triggered during one SIE exit. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-05-04 18:38:48 +08:00
/* only modify non-PER information */
li->irq.pgm.trans_exc_code = irq->u.pgm.trans_exc_code;
li->irq.pgm.mon_code = irq->u.pgm.mon_code;
li->irq.pgm.data_exc_code = irq->u.pgm.data_exc_code;
li->irq.pgm.mon_class_nr = irq->u.pgm.mon_class_nr;
li->irq.pgm.exc_access_id = irq->u.pgm.exc_access_id;
li->irq.pgm.op_access_id = irq->u.pgm.op_access_id;
} else {
li->irq.pgm = irq->u.pgm;
}
KVM: s390: use atomic bitops to access pending_irqs bitmap Currently we use a mixture of atomic/non-atomic bitops and the local_int spin lock to protect the pending_irqs bitmap and interrupt payload data. We need to use atomic bitops for the pending_irqs bitmap everywhere and in addition acquire the local_int lock where interrupt data needs to be protected. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-01 23:43:40 +08:00
set_bit(IRQ_PEND_PROG, &li->pending_irqs);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __inject_pfault_init(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 4, "inject: pfault init parameter block at 0x%llx",
irq->u.ext.ext_params2);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_INT_PFAULT_INIT,
irq->u.ext.ext_params,
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
irq->u.ext.ext_params2);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
li->irq.ext = irq->u.ext;
set_bit(IRQ_PEND_PFAULT_INIT, &li->pending_irqs);
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
KVM: s390: make local function static sparse rightfully complains about warning: symbol '__inject_extcall' was not declared. Should it be static? Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-15 19:40:42 +08:00
static int __inject_extcall(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_extcall_info *extcall = &li->irq.extcall;
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
uint16_t src_id = irq->u.extcall.code;
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 4, "inject: external call source-cpu:%u",
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
src_id);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_INT_EXTERNAL_CALL,
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
src_id, 0);
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
/* sending vcpu invalid */
KVM: s390: fix wrong lookup of VCPUs by array index For now, VCPUs were always created sequentially with incrementing VCPU ids. Therefore, the index in the VCPUs array matched the id. As sequential creation might change with cpu hotplug, let's use the correct lookup function to find a VCPU by id, not array index. Let's also use kvm_lookup_vcpu() for validation of the sending VCPU on external call injection. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # db27a7a KVM: Provide function for VCPU lookup by id
2015-11-05 16:06:06 +08:00
if (kvm_get_vcpu_by_id(vcpu->kvm, src_id) == NULL)
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
return -EINVAL;
s390/sclp: unify basic sclp access by exposing "struct sclp" Let's unify basic access to sclp fields by storing the data in an external struct in asm/sclp.h. The values can now directly be accessed by other components, so there is no need for most accessor functions and external variables anymore. The mtid, mtid_max and facility part will be cleaned up separately. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-06 19:18:59 +08:00
if (sclp.has_sigpif)
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
return sca_inject_ext_call(vcpu, src_id);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: fix external call injection without sigp interpretation Commit ea5f49692575 ("KVM: s390: only one external call may be pending at a time") introduced a bug on machines that don't have SIGP interpretation facility installed. The injection of an external call will now always fail with -EBUSY (if none is already pending). This leads to the following symptoms: - An external call will be injected but with the wrong "src cpu id", as this id will not be remembered. - The target vcpu will not be woken up, therefore the guest will hang if it cannot deal with unexpected failures of the SIGP EXTERNAL CALL instruction. - If an external call is already pending, -EBUSY will not be reported. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.0 Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-30 19:33:59 +08:00
if (test_and_set_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs))
KVM: s390: only one external call may be pending at a time Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 21:29:30 +08:00
return -EBUSY;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
*extcall = irq->u.extcall;
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __inject_set_prefix(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_prefix_info *prefix = &li->irq.prefix;
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
VCPU_EVENT(vcpu, 3, "inject: set prefix to %x",
KVM: s390: trace correct values for set prefix and machine checks When injecting SIGP set prefix or a machine check, we trace the values in our per-vcpu local_int data structure instead of the parameters passed to the function. Fix this by changing the trace statement to use the correct values. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-18 22:52:21 +08:00
irq->u.prefix.address);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_SIGP_SET_PREFIX,
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
irq->u.prefix.address, 0);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: SIGP SET PREFIX cleanup This patch cleanes up the the SIGP SET PREFIX code. A SIGP SET PREFIX irq may only be injected if the target vcpu is stopped. Let's move the checking code into the injection code and return -EBUSY if the target vcpu is not stopped. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-14 15:44:55 +08:00
if (!is_vcpu_stopped(vcpu))
return -EBUSY;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
*prefix = irq->u.prefix;
set_bit(IRQ_PEND_SET_PREFIX, &li->pending_irqs);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
#define KVM_S390_STOP_SUPP_FLAGS (KVM_S390_STOP_FLAG_STORE_STATUS)
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __inject_sigp_stop(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: new parameter for SIGP STOP irqs In order to get rid of the action_flags and to properly migrate pending SIGP STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember whether to store the status when stopping. For this reason, a new parameter (flags) for the SIGP STOP irq is introduced. These flags further define details of the requested STOP and can be easily migrated. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:16 +08:00
struct kvm_s390_stop_info *stop = &li->irq.stop;
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
int rc = 0;
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_SIGP_STOP, 0, 0);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: new parameter for SIGP STOP irqs In order to get rid of the action_flags and to properly migrate pending SIGP STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember whether to store the status when stopping. For this reason, a new parameter (flags) for the SIGP STOP irq is introduced. These flags further define details of the requested STOP and can be easily migrated. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:16 +08:00
if (irq->u.stop.flags & ~KVM_S390_STOP_SUPP_FLAGS)
return -EINVAL;
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
if (is_vcpu_stopped(vcpu)) {
if (irq->u.stop.flags & KVM_S390_STOP_FLAG_STORE_STATUS)
rc = kvm_s390_store_status_unloaded(vcpu,
KVM_S390_STORE_STATUS_NOADDR);
return rc;
}
if (test_and_set_bit(IRQ_PEND_SIGP_STOP, &li->pending_irqs))
return -EBUSY;
KVM: s390: new parameter for SIGP STOP irqs In order to get rid of the action_flags and to properly migrate pending SIGP STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember whether to store the status when stopping. For this reason, a new parameter (flags) for the SIGP STOP irq is introduced. These flags further define details of the requested STOP and can be easily migrated. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:16 +08:00
stop->flags = irq->u.stop.flags;
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
__set_cpuflag(vcpu, CPUSTAT_STOP_INT);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
static int __inject_sigp_restart(struct kvm_vcpu *vcpu,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 3, "%s", "inject: restart int");
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_RESTART, 0, 0);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
set_bit(IRQ_PEND_RESTART, &li->pending_irqs);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
static int __inject_sigp_emergency(struct kvm_vcpu *vcpu,
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 4, "inject: emergency from cpu %u",
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
irq->u.emerg.code);
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_INT_EMERGENCY,
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
irq->u.emerg.code, 0);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: avoid memory overwrites on emergency signal injection Commit 383d0b050106 ("KVM: s390: handle pending local interrupts via bitmap") introduced a possible memory overwrite from user space. User space could pass an invalid emergency signal code (sending VCPU) and therefore exceed the bitmap. Let's take care of this case and check that the id is in the valid range. Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.19+ db27a7a KVM: Provide function for VCPU lookup by id Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-05 16:38:15 +08:00
/* sending vcpu invalid */
if (kvm_get_vcpu_by_id(vcpu->kvm, irq->u.emerg.code) == NULL)
return -EINVAL;
KVM: s390: fix bug in sigp emergency signal injection Currently we are always setting the wrong bit in the bitmap for pending emergency signals. Instead of using emerg.code from the passed in irq parameter, we use the value in our per-vcpu local_int structure, which is always zero. That means all emergency signals will have address 0 as parameter. If two CPUs send a SIGP to the same target, one might be lost. Let's fix this by using the value from the parameter and also trace the correct value. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-18 22:48:14 +08:00
set_bit(irq->u.emerg.code, li->sigp_emerg_pending);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
set_bit(IRQ_PEND_EXT_EMERGENCY, &li->pending_irqs);
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __inject_mchk(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
struct kvm_s390_mchk_info *mchk = &li->irq.mchk;
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 3, "inject: machine check mcic 0x%llx",
KVM: s390: trace correct values for set prefix and machine checks When injecting SIGP set prefix or a machine check, we trace the values in our per-vcpu local_int data structure instead of the parameters passed to the function. Fix this by changing the trace statement to use the correct values. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-18 22:52:21 +08:00
irq->u.mchk.mcic);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_MCHK, 0,
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
irq->u.mchk.mcic);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
/*
KVM: s390: allow injecting all kinds of machine checks Allow to specify CR14, logout area, external damage code and failed storage address. Since more then one machine check can be indicated to the guest at a time we need to combine all indication bits with already pending requests. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-13 16:09:04 +08:00
* Because repressible machine checks can be indicated along with
* exigent machine checks (PoP, Chapter 11, Interruption action)
* we need to combine cr14, mcic and external damage code.
* Failing storage address and the logout area should not be or'ed
* together, we just indicate the last occurrence of the corresponding
* machine check
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
*/
KVM: s390: allow injecting all kinds of machine checks Allow to specify CR14, logout area, external damage code and failed storage address. Since more then one machine check can be indicated to the guest at a time we need to combine all indication bits with already pending requests. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-13 16:09:04 +08:00
mchk->cr14 |= irq->u.mchk.cr14;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
mchk->mcic |= irq->u.mchk.mcic;
KVM: s390: allow injecting all kinds of machine checks Allow to specify CR14, logout area, external damage code and failed storage address. Since more then one machine check can be indicated to the guest at a time we need to combine all indication bits with already pending requests. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-13 16:09:04 +08:00
mchk->ext_damage_code |= irq->u.mchk.ext_damage_code;
mchk->failing_storage_address = irq->u.mchk.failing_storage_address;
memcpy(&mchk->fixed_logout, &irq->u.mchk.fixed_logout,
sizeof(mchk->fixed_logout));
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
if (mchk->mcic & MCHK_EX_MASK)
set_bit(IRQ_PEND_MCHK_EX, &li->pending_irqs);
else if (mchk->mcic & MCHK_REP_MASK)
set_bit(IRQ_PEND_MCHK_REP, &li->pending_irqs);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __inject_ckc(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 3, "%s", "inject: clock comparator external");
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_INT_CLOCK_COMP,
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
0, 0);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
set_bit(IRQ_PEND_EXT_CLOCK_COMP, &li->pending_irqs);
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
return 0;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
static int __inject_cpu_timer(struct kvm_vcpu *vcpu)
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VCPU_EVENT(vcpu, 3, "%s", "inject: cpu timer external");
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_INT_CPU_TIMER,
KVM: s390: remove "from (user|kernel)" from irq injection messages The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-20 16:33:03 +08:00
0, 0);
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
set_bit(IRQ_PEND_EXT_CPU_TIMER, &li->pending_irqs);
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
return 0;
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static struct kvm_s390_interrupt_info *get_io_int(struct kvm *kvm,
int isc, u32 schid)
{
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
struct list_head *isc_list = &fi->lists[FIRQ_LIST_IO_ISC_0 + isc];
struct kvm_s390_interrupt_info *iter;
u16 id = (schid & 0xffff0000U) >> 16;
u16 nr = schid & 0x0000ffffU;
spin_lock(&fi->lock);
list_for_each_entry(iter, isc_list, list) {
if (schid && (id != iter->io.subchannel_id ||
nr != iter->io.subchannel_nr))
continue;
/* found an appropriate entry */
list_del_init(&iter->list);
fi->counters[FIRQ_CNTR_IO] -= 1;
if (list_empty(isc_list))
clear_bit(IRQ_PEND_IO_ISC_0 + isc, &fi->pending_irqs);
spin_unlock(&fi->lock);
return iter;
}
spin_unlock(&fi->lock);
return NULL;
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
/*
* Dequeue and return an I/O interrupt matching any of the interruption
* subclasses as designated by the isc mask in cr6 and the schid (if != 0).
*/
KVM: s390: Add support for channel I/O instructions. Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:12 +08:00
struct kvm_s390_interrupt_info *kvm_s390_get_io_int(struct kvm *kvm,
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
u64 isc_mask, u32 schid)
{
struct kvm_s390_interrupt_info *inti = NULL;
int isc;
for (isc = 0; isc <= MAX_ISC && !inti; isc++) {
if (isc_mask & isc_to_isc_bits(isc))
inti = get_io_int(kvm, isc, schid);
}
return inti;
}
#define SCCB_MASK 0xFFFFFFF8
#define SCCB_EVENT_PENDING 0x3
static int __inject_service(struct kvm *kvm,
struct kvm_s390_interrupt_info *inti)
{
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
spin_lock(&fi->lock);
fi->srv_signal.ext_params |= inti->ext.ext_params & SCCB_EVENT_PENDING;
/*
* Early versions of the QEMU s390 bios will inject several
* service interrupts after another without handling a
* condition code indicating busy.
* We will silently ignore those superfluous sccb values.
* A future version of QEMU will take care of serialization
* of servc requests
*/
if (fi->srv_signal.ext_params & SCCB_MASK)
goto out;
fi->srv_signal.ext_params |= inti->ext.ext_params & SCCB_MASK;
set_bit(IRQ_PEND_EXT_SERVICE, &fi->pending_irqs);
out:
spin_unlock(&fi->lock);
kfree(inti);
return 0;
}
static int __inject_virtio(struct kvm *kvm,
struct kvm_s390_interrupt_info *inti)
{
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
spin_lock(&fi->lock);
if (fi->counters[FIRQ_CNTR_VIRTIO] >= KVM_S390_MAX_VIRTIO_IRQS) {
spin_unlock(&fi->lock);
return -EBUSY;
}
fi->counters[FIRQ_CNTR_VIRTIO] += 1;
list_add_tail(&inti->list, &fi->lists[FIRQ_LIST_VIRTIO]);
set_bit(IRQ_PEND_VIRTIO, &fi->pending_irqs);
spin_unlock(&fi->lock);
return 0;
}
static int __inject_pfault_done(struct kvm *kvm,
struct kvm_s390_interrupt_info *inti)
{
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
spin_lock(&fi->lock);
if (fi->counters[FIRQ_CNTR_PFAULT] >=
(ASYNC_PF_PER_VCPU * KVM_MAX_VCPUS)) {
spin_unlock(&fi->lock);
return -EBUSY;
}
fi->counters[FIRQ_CNTR_PFAULT] += 1;
list_add_tail(&inti->list, &fi->lists[FIRQ_LIST_PFAULT]);
set_bit(IRQ_PEND_PFAULT_DONE, &fi->pending_irqs);
spin_unlock(&fi->lock);
return 0;
}
#define CR_PENDING_SUBCLASS 28
static int __inject_float_mchk(struct kvm *kvm,
struct kvm_s390_interrupt_info *inti)
{
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
spin_lock(&fi->lock);
fi->mchk.cr14 |= inti->mchk.cr14 & (1UL << CR_PENDING_SUBCLASS);
fi->mchk.mcic |= inti->mchk.mcic;
set_bit(IRQ_PEND_MCHK_REP, &fi->pending_irqs);
spin_unlock(&fi->lock);
kfree(inti);
return 0;
}
static int __inject_io(struct kvm *kvm, struct kvm_s390_interrupt_info *inti)
KVM: s390: Add support for channel I/O instructions. Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:12 +08:00
{
struct kvm_s390_float_interrupt *fi;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct list_head *list;
int isc;
KVM: s390: Add support for channel I/O instructions. Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:12 +08:00
fi = &kvm->arch.float_int;
spin_lock(&fi->lock);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (fi->counters[FIRQ_CNTR_IO] >= KVM_S390_MAX_FLOAT_IRQS) {
spin_unlock(&fi->lock);
return -EBUSY;
KVM: s390: limit floating irqs Userspace can flood the kernel with interrupts as of now, so let's limit the number of pending floating interrupts injected via either the floating interrupt controller or the KVM_S390_INTERRUPT ioctl. We can have up to 4*64k pending subchannels + 8 adapter interrupts, as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts. There are also sclp and machine checks. This gives us (4*65536+8+64*64+1+1) = 266250 interrupts. Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30 15:40:23 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
fi->counters[FIRQ_CNTR_IO] += 1;
KVM: s390: fixup I/O interrupt traces We currently have two issues with the I/O interrupt injection logging: 1. All QEMU versions up to 2.6 have a wrong encoding of device numbers etc for the I/O interrupt type, so the inject VM_EVENT will have wrong data. Let's fix this by using the interrupt parameters and not the interrupt type number. 2. We only log in kvm_s390_inject_vm, but not when coming from kvm_s390_reinject_io_int or from flic. Let's move the logging to the common __inject_io function. We also enhance the logging for delivery to match the data. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-07 15:37:17 +08:00
if (inti->type & KVM_S390_INT_IO_AI_MASK)
VM_EVENT(kvm, 4, "%s", "inject: I/O (AI)");
else
VM_EVENT(kvm, 4, "inject: I/O %x ss %x schid %04x",
inti->io.subchannel_id >> 8,
inti->io.subchannel_id >> 1 & 0x3,
inti->io.subchannel_nr);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
isc = int_word_to_isc(inti->io.io_int_word);
list = &fi->lists[FIRQ_LIST_IO_ISC_0 + isc];
list_add_tail(&inti->list, list);
set_bit(IRQ_PEND_IO_ISC_0 + isc, &fi->pending_irqs);
KVM: s390: Add support for channel I/O instructions. Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:12 +08:00
spin_unlock(&fi->lock);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
return 0;
KVM: s390: Add support for channel I/O instructions. Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:12 +08:00
}
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: factor out and optimize floating irq VCPU kick This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-14 21:08:38 +08:00
/*
* Find a destination VCPU for a floating irq and kick it.
*/
static void __floating_irq_kick(struct kvm *kvm, u64 type)
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
{
KVM: s390: factor out and optimize floating irq VCPU kick This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-14 21:08:38 +08:00
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
KVM: s390: rename private structures While doing some tests with our lcrash implementation I have seen a naming conflict with prefix_info in kvm_host.h vs. addrconf.h To avoid future conflicts lets rename private definitions in asm/kvm_host.h by adding the kvm_s390 prefix. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-27 21:05:40 +08:00
struct kvm_s390_local_interrupt *li;
KVM: s390: factor out and optimize floating irq VCPU kick This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-14 21:08:38 +08:00
struct kvm_vcpu *dst_vcpu;
int sigcpu, online_vcpus, nr_tries = 0;
online_vcpus = atomic_read(&kvm->online_vcpus);
if (!online_vcpus)
return;
/* find idle VCPUs first, then round robin */
sigcpu = find_first_bit(fi->idle_mask, online_vcpus);
if (sigcpu == online_vcpus) {
do {
sigcpu = fi->next_rr_cpu;
fi->next_rr_cpu = (fi->next_rr_cpu + 1) % online_vcpus;
/* avoid endless loops if all vcpus are stopped */
if (nr_tries++ >= online_vcpus)
return;
} while (is_vcpu_stopped(kvm_get_vcpu(kvm, sigcpu)));
}
dst_vcpu = kvm_get_vcpu(kvm, sigcpu);
/* make the VCPU drop out of the SIE, or wake it up if sleeping */
li = &dst_vcpu->arch.local_int;
spin_lock(&li->lock);
switch (type) {
case KVM_S390_MCHK:
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_STOP_INT, li->cpuflags);
KVM: s390: factor out and optimize floating irq VCPU kick This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-14 21:08:38 +08:00
break;
case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX:
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_IO_INT, li->cpuflags);
KVM: s390: factor out and optimize floating irq VCPU kick This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-14 21:08:38 +08:00
break;
default:
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 07:12:32 +08:00
atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
KVM: s390: factor out and optimize floating irq VCPU kick This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-14 21:08:38 +08:00
break;
}
spin_unlock(&li->lock);
kvm_s390_vcpu_wakeup(dst_vcpu);
}
static int __inject_vm(struct kvm *kvm, struct kvm_s390_interrupt_info *inti)
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
u64 type = READ_ONCE(inti->type);
int rc;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
switch (type) {
case KVM_S390_MCHK:
rc = __inject_float_mchk(kvm, inti);
break;
case KVM_S390_INT_VIRTIO:
rc = __inject_virtio(kvm, inti);
break;
case KVM_S390_INT_SERVICE:
rc = __inject_service(kvm, inti);
break;
case KVM_S390_INT_PFAULT_DONE:
rc = __inject_pfault_done(kvm, inti);
break;
case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX:
rc = __inject_io(kvm, inti);
break;
default:
KVM: s390: limit floating irqs Userspace can flood the kernel with interrupts as of now, so let's limit the number of pending floating interrupts injected via either the floating interrupt controller or the KVM_S390_INTERRUPT ioctl. We can have up to 4*64k pending subchannels + 8 adapter interrupts, as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts. There are also sclp and machine checks. This gives us (4*65536+8+64*64+1+1) = 266250 interrupts. Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30 15:40:23 +08:00
rc = -EINVAL;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (rc)
return rc;
KVM: s390: factor out and optimize floating irq VCPU kick This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-14 21:08:38 +08:00
__floating_irq_kick(kvm, type);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
return 0;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
}
int kvm_s390_inject_vm(struct kvm *kvm,
struct kvm_s390_interrupt *s390int)
{
struct kvm_s390_interrupt_info *inti;
KVM: s390: avoid memory leaks if __inject_vm() fails We have to delete the allocated interrupt info if __inject_vm() fails. Otherwise user space can keep flooding kvm with floating interrupts and provoke more and more memory leaks. Reported-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-16 19:58:09 +08:00
int rc;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
inti = kzalloc(sizeof(*inti), GFP_KERNEL);
if (!inti)
return -ENOMEM;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
inti->type = s390int->type;
switch (inti->type) {
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
case KVM_S390_INT_VIRTIO:
[S390] Use unsigned long long for u64 on 64bit. As requested by Andrew. Same as what sparc did. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-01-09 19:14:56 +08:00
VM_EVENT(kvm, 5, "inject: virtio parm:%x,parm64:%llx",
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
s390int->parm, s390int->parm64);
inti->ext.ext_params = s390int->parm;
inti->ext.ext_params2 = s390int->parm64;
break;
case KVM_S390_INT_SERVICE:
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VM_EVENT(kvm, 4, "inject: sclp parm:%x", s390int->parm);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
inti->ext.ext_params = s390int->parm;
break;
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
case KVM_S390_INT_PFAULT_DONE:
inti->ext.ext_params2 = s390int->parm64;
break;
KVM: s390: Add support for machine checks. Add support for injecting machine checks (only repressible conditions for now). This is a bit more involved than I/O interrupts, for these reasons: - Machine checks come in both floating and cpu varieties. - We don't have a bit for machine checks enabling, but have to use a roundabout approach with trapping PSW changing instructions and watching for opened machine checks. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:09 +08:00
case KVM_S390_MCHK:
KVM: s390: Fixup interrupt vcpu event messages and levels This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2015-07-09 20:08:18 +08:00
VM_EVENT(kvm, 3, "inject: machine check mcic 0x%llx",
KVM: s390: Add support for machine checks. Add support for injecting machine checks (only repressible conditions for now). This is a bit more involved than I/O interrupts, for these reasons: - Machine checks come in both floating and cpu varieties. - We don't have a bit for machine checks enabling, but have to use a roundabout approach with trapping PSW changing instructions and watching for opened machine checks. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:09 +08:00
s390int->parm64);
inti->mchk.cr14 = s390int->parm; /* upper bits are not used */
inti->mchk.mcic = s390int->parm64;
break;
KVM: s390: Support for I/O interrupts. Add support for handling I/O interrupts (standard, subchannel-related ones and rudimentary adapter interrupts). The subchannel-identifying parameters are encoded into the interrupt type. I/O interrupts are floating, so they can't be injected on a specific vcpu. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:08 +08:00
case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX:
inti->io.subchannel_id = s390int->parm >> 16;
inti->io.subchannel_nr = s390int->parm & 0x0000ffffu;
inti->io.io_int_parm = s390int->parm64 >> 32;
inti->io.io_int_word = s390int->parm64 & 0x00000000ffffffffull;
break;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
default:
kfree(inti);
return -EINVAL;
}
KVM: s390: Add implementation-specific trace events Introduce a new trace system, kvm-s390, for some kvm/s390 specific trace points: - injection of interrupts - delivery of interrupts to the guest - creation/destruction of kvm machines and vcpus - stop actions for vcpus - reset requests for userspace Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-23 23:20:30 +08:00
trace_kvm_s390_inject_vm(s390int->type, s390int->parm, s390int->parm64,
2);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: avoid memory leaks if __inject_vm() fails We have to delete the allocated interrupt info if __inject_vm() fails. Otherwise user space can keep flooding kvm with floating interrupts and provoke more and more memory leaks. Reported-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-16 19:58:09 +08:00
rc = __inject_vm(kvm, inti);
if (rc)
kfree(inti);
return rc;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: s390: reinjection of irqs can fail in the tpi handler The reinjection of an I/O interrupt can fail if the list is at the limit and between the dequeue and the reinjection, another I/O interrupt is injected (e.g. if user space floods kvm with I/O interrupts). This patch avoids this memory leak and returns -EFAULT in this special case. This error is not recoverable, so let's fail hard. This can later be avoided by not dequeuing the interrupt but working directly on the locked list. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-04 22:59:11 +08:00
int kvm_s390_reinject_io_int(struct kvm *kvm,
KVM: s390: reinject io interrupt on tpi failure The tpi instruction should be suppressed on addressing and protection exceptions, so we need to re-inject the dequeued io interrupt in that case. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-09 01:07:54 +08:00
struct kvm_s390_interrupt_info *inti)
{
KVM: s390: reinjection of irqs can fail in the tpi handler The reinjection of an I/O interrupt can fail if the list is at the limit and between the dequeue and the reinjection, another I/O interrupt is injected (e.g. if user space floods kvm with I/O interrupts). This patch avoids this memory leak and returns -EFAULT in this special case. This error is not recoverable, so let's fail hard. This can later be avoided by not dequeuing the interrupt but working directly on the locked list. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-04 22:59:11 +08:00
return __inject_vm(kvm, inti);
KVM: s390: reinject io interrupt on tpi failure The tpi instruction should be suppressed on addressing and protection exceptions, so we need to re-inject the dequeued io interrupt in that case. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-09 01:07:54 +08:00
}
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
int s390int_to_s390irq(struct kvm_s390_interrupt *s390int,
struct kvm_s390_irq *irq)
{
irq->type = s390int->type;
switch (irq->type) {
case KVM_S390_PROGRAM_INT:
if (s390int->parm & 0xffff0000)
return -EINVAL;
irq->u.pgm.code = s390int->parm;
break;
case KVM_S390_SIGP_SET_PREFIX:
irq->u.prefix.address = s390int->parm;
break;
KVM: s390: new parameter for SIGP STOP irqs In order to get rid of the action_flags and to properly migrate pending SIGP STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember whether to store the status when stopping. For this reason, a new parameter (flags) for the SIGP STOP irq is introduced. These flags further define details of the requested STOP and can be easily migrated. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:16 +08:00
case KVM_S390_SIGP_STOP:
irq->u.stop.flags = s390int->parm;
break;
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
case KVM_S390_INT_EXTERNAL_CALL:
KVM: s390: fix bug in interrupt parameter check When we convert interrupt data from struct kvm_s390_interrupt to struct kvm_s390_irq we need to check the data in the input parameter not the output parameter. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-15 21:40:34 +08:00
if (s390int->parm & 0xffff0000)
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
return -EINVAL;
irq->u.extcall.code = s390int->parm;
break;
case KVM_S390_INT_EMERGENCY:
KVM: s390: fix bug in interrupt parameter check When we convert interrupt data from struct kvm_s390_interrupt to struct kvm_s390_irq we need to check the data in the input parameter not the output parameter. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-15 21:40:34 +08:00
if (s390int->parm & 0xffff0000)
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
return -EINVAL;
irq->u.emerg.code = s390int->parm;
break;
case KVM_S390_MCHK:
irq->u.mchk.mcic = s390int->parm64;
break;
}
return 0;
}
KVM: s390: handle stop irqs without action_bits This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-10-15 22:48:53 +08:00
int kvm_s390_is_stop_irq_pending(struct kvm_vcpu *vcpu)
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
return test_bit(IRQ_PEND_SIGP_STOP, &li->pending_irqs);
}
void kvm_s390_clear_stop_irq(struct kvm_vcpu *vcpu)
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
spin_lock(&li->lock);
li->irq.stop.flags = 0;
clear_bit(IRQ_PEND_SIGP_STOP, &li->pending_irqs);
spin_unlock(&li->lock);
}
KVM: s390: refactor vcpu injection function Let's provide a version of kvm_s390_inject_vcpu() that does not acquire the local-interrupt lock and skips waking up the vcpu. To be used in a later patch for vcpu-local interrupt migration, where we are already holding the lock. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-19 22:12:12 +08:00
static int do_inject_vcpu(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
{
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
int rc;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
switch (irq->type) {
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
case KVM_S390_PROGRAM_INT:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_prog(vcpu, irq);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
break;
KVM: s390: Fix SIGP set prefix ioctl This patch fixes the SET PREFIX interrupt if triggered by userspace. Until now, it was not necessary, but life migration will need it. In addition, it helped me creating SMP support for my kvm_crashme tool (lets kvm execute random guest memory content). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-22 17:29:08 +08:00
case KVM_S390_SIGP_SET_PREFIX:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_set_prefix(vcpu, irq);
KVM: s390: Fix SIGP set prefix ioctl This patch fixes the SET PREFIX interrupt if triggered by userspace. Until now, it was not necessary, but life migration will need it. In addition, it helped me creating SMP support for my kvm_crashme tool (lets kvm execute random guest memory content). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-22 17:29:08 +08:00
break;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
case KVM_S390_SIGP_STOP:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_sigp_stop(vcpu, irq);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
break;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
case KVM_S390_RESTART:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_sigp_restart(vcpu, irq);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
break;
KVM: s390: Add clock comparator and CPU timer IRQ injection Add an interface to inject clock comparator and CPU timer interrupts into the guest. This is needed for handling the external interrupt interception. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-26 23:11:54 +08:00
case KVM_S390_INT_CLOCK_COMP:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_ckc(vcpu);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
break;
KVM: s390: Add clock comparator and CPU timer IRQ injection Add an interface to inject clock comparator and CPU timer interrupts into the guest. This is needed for handling the external interrupt interception. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-26 23:11:54 +08:00
case KVM_S390_INT_CPU_TIMER:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_cpu_timer(vcpu);
s390/kvm: Interrupt injection bugfix EXTERNAL_CALL and EMERGENCY type interrupts need to preserve their interrupt code parameter when being injected from user space. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-02 22:25:36 +08:00
break;
KVM: s390: implement sigp external call Implement sigp external call, which might be required for guests that issue an external call instead of an emergency signal for IPI. This fixes an issue with "KVM: unknown SIGP: 0x02" when booting such an SMP guest. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-10-18 18:27:15 +08:00
case KVM_S390_INT_EXTERNAL_CALL:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_extcall(vcpu, irq);
s390/kvm: Interrupt injection bugfix EXTERNAL_CALL and EMERGENCY type interrupts need to preserve their interrupt code parameter when being injected from user space. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-02 22:25:36 +08:00
break;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
case KVM_S390_INT_EMERGENCY:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_sigp_emergency(vcpu, irq);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
break;
KVM: s390: Add support for machine checks. Add support for injecting machine checks (only repressible conditions for now). This is a bit more involved than I/O interrupts, for these reasons: - Machine checks come in both floating and cpu varieties. - We don't have a bit for machine checks enabling, but have to use a roundabout approach with trapping PSW changing instructions and watching for opened machine checks. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:09 +08:00
case KVM_S390_MCHK:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_mchk(vcpu, irq);
KVM: s390: Add support for machine checks. Add support for injecting machine checks (only repressible conditions for now). This is a bit more involved than I/O interrupts, for these reasons: - Machine checks come in both floating and cpu varieties. - We don't have a bit for machine checks enabling, but have to use a roundabout approach with trapping PSW changing instructions and watching for opened machine checks. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:09 +08:00
break;
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
case KVM_S390_INT_PFAULT_INIT:
KVM: s390: handle pending local interrupts via bitmap This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-29 21:11:49 +08:00
rc = __inject_pfault_init(vcpu, irq);
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
break;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
case KVM_S390_INT_VIRTIO:
case KVM_S390_INT_SERVICE:
KVM: s390: Support for I/O interrupts. Add support for handling I/O interrupts (standard, subchannel-related ones and rudimentary adapter interrupts). The subchannel-identifying parameters are encoded into the interrupt type. I/O interrupts are floating, so they can't be injected on a specific vcpu. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-20 22:32:08 +08:00
case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX:
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
default:
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
rc = -EINVAL;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: s390: refactor vcpu injection function Let's provide a version of kvm_s390_inject_vcpu() that does not acquire the local-interrupt lock and skips waking up the vcpu. To be used in a later patch for vcpu-local interrupt migration, where we are already holding the lock. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-19 22:12:12 +08:00
return rc;
}
int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
int rc;
spin_lock(&li->lock);
rc = do_inject_vcpu(vcpu, irq);
KVM: s390: remove _bh locking from local_int.lock local_int.lock is not used in a bottom-half handler anymore, therefore we can turn it into an ordinary spin_lock at all occurrences. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 16:23:53 +08:00
spin_unlock(&li->lock);
KVM: s390: refactor interrupt injection code In preparation for the rework of the local interrupt injection code, factor out injection routines from kvm_s390_inject_vcpu(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-07-28 21:37:58 +08:00
if (!rc)
kvm_s390_vcpu_wakeup(vcpu);
return rc;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:26 +08:00
}
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
static inline void clear_irq_list(struct list_head *_list)
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
{
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct kvm_s390_interrupt_info *inti, *n;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
list_for_each_entry_safe(inti, n, _list, list) {
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
list_del(&inti->list);
kfree(inti);
}
}
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
static void inti_to_irq(struct kvm_s390_interrupt_info *inti,
struct kvm_s390_irq *irq)
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
{
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
irq->type = inti->type;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
switch (inti->type) {
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
case KVM_S390_INT_PFAULT_INIT:
case KVM_S390_INT_PFAULT_DONE:
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
case KVM_S390_INT_VIRTIO:
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
irq->u.ext = inti->ext;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
break;
case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX:
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
irq->u.io = inti->io;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
break;
}
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
void kvm_s390_clear_float_irqs(struct kvm *kvm)
{
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
int i;
spin_lock(&fi->lock);
KVM: s390: clear floating interrupt bitmap and parameters commit 6d3da24141 ("KVM: s390: deliver floating interrupts in order of priority") introduced a regression for the reset handling. We don't clear the bitmap of pending floating interrupts and interrupt parameters. This could result in stale interrupts even after a reset. Let's fix this by clearing the pending bitmap and the parameters for service and machine check interrupts. Cc: stable@vger.kernel.org # 4.1 Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-22 19:20:12 +08:00
fi->pending_irqs = 0;
memset(&fi->srv_signal, 0, sizeof(fi->srv_signal));
memset(&fi->mchk, 0, sizeof(fi->mchk));
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
for (i = 0; i < FIRQ_LIST_COUNT; i++)
clear_irq_list(&fi->lists[i]);
for (i = 0; i < FIRQ_MAX_COUNT; i++)
fi->counters[i] = 0;
spin_unlock(&fi->lock);
};
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
static int get_all_floating_irqs(struct kvm *kvm, u8 __user *usrbuf, u64 len)
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
{
struct kvm_s390_interrupt_info *inti;
struct kvm_s390_float_interrupt *fi;
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
struct kvm_s390_irq *buf;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
struct kvm_s390_irq *irq;
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
int max_irqs;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
int ret = 0;
int n = 0;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
int i;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
if (len > KVM_S390_FLIC_MAX_BUFFER || len == 0)
return -EINVAL;
/*
* We are already using -ENOMEM to signal
* userspace it may retry with a bigger buffer,
* so we need to use something else for this case
*/
buf = vzalloc(len);
if (!buf)
return -ENOBUFS;
max_irqs = len / sizeof(struct kvm_s390_irq);
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
fi = &kvm->arch.float_int;
spin_lock(&fi->lock);
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
for (i = 0; i < FIRQ_LIST_COUNT; i++) {
list_for_each_entry(inti, &fi->lists[i], list) {
if (n == max_irqs) {
/* signal userspace to try again */
ret = -ENOMEM;
goto out;
}
inti_to_irq(inti, &buf[n]);
n++;
}
}
if (test_bit(IRQ_PEND_EXT_SERVICE, &fi->pending_irqs)) {
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
if (n == max_irqs) {
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
/* signal userspace to try again */
ret = -ENOMEM;
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
goto out;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
irq = (struct kvm_s390_irq *) &buf[n];
irq->type = KVM_S390_INT_SERVICE;
irq->u.ext = fi->srv_signal;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
n++;
}
KVM: s390: deliver floating interrupts in order of priority This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-03 21:18:35 +08:00
if (test_bit(IRQ_PEND_MCHK_REP, &fi->pending_irqs)) {
if (n == max_irqs) {
/* signal userspace to try again */
ret = -ENOMEM;
goto out;
}
irq = (struct kvm_s390_irq *) &buf[n];
irq->type = KVM_S390_MCHK;
irq->u.mchk = fi->mchk;
n++;
}
out:
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
spin_unlock(&fi->lock);
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
if (!ret && n > 0) {
if (copy_to_user(usrbuf, buf, sizeof(struct kvm_s390_irq) * n))
ret = -EFAULT;
}
vfree(buf);
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
return ret < 0 ? ret : n;
}
static int flic_get_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
{
int r;
switch (attr->group) {
case KVM_DEV_FLIC_GET_ALL_IRQS:
KVM: s390: fix get_all_floating_irqs This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 19:17:13 +08:00
r = get_all_floating_irqs(dev->kvm, (u8 __user *) attr->addr,
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
attr->attr);
break;
default:
r = -EINVAL;
}
return r;
}
static inline int copy_irq_from_user(struct kvm_s390_interrupt_info *inti,
u64 addr)
{
struct kvm_s390_irq __user *uptr = (struct kvm_s390_irq __user *) addr;
void *target = NULL;
void __user *source;
u64 size;
if (get_user(inti->type, (u64 __user *)addr))
return -EFAULT;
switch (inti->type) {
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
case KVM_S390_INT_PFAULT_INIT:
case KVM_S390_INT_PFAULT_DONE:
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
case KVM_S390_INT_VIRTIO:
case KVM_S390_INT_SERVICE:
target = (void *) &inti->ext;
source = &uptr->u.ext;
size = sizeof(inti->ext);
break;
case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX:
target = (void *) &inti->io;
source = &uptr->u.io;
size = sizeof(inti->io);
break;
case KVM_S390_MCHK:
target = (void *) &inti->mchk;
source = &uptr->u.mchk;
size = sizeof(inti->mchk);
break;
default:
return -EINVAL;
}
if (copy_from_user(target, source, size))
return -EFAULT;
return 0;
}
static int enqueue_floating_irq(struct kvm_device *dev,
struct kvm_device_attr *attr)
{
struct kvm_s390_interrupt_info *inti = NULL;
int r = 0;
int len = attr->attr;
if (len % sizeof(struct kvm_s390_irq) != 0)
return -EINVAL;
else if (len > KVM_S390_FLIC_MAX_BUFFER)
return -EINVAL;
while (len >= sizeof(struct kvm_s390_irq)) {
inti = kzalloc(sizeof(*inti), GFP_KERNEL);
if (!inti)
return -ENOMEM;
r = copy_irq_from_user(inti, attr->addr);
if (r) {
kfree(inti);
return r;
}
KVM: s390: limit floating irqs Userspace can flood the kernel with interrupts as of now, so let's limit the number of pending floating interrupts injected via either the floating interrupt controller or the KVM_S390_INTERRUPT ioctl. We can have up to 4*64k pending subchannels + 8 adapter interrupts, as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts. There are also sclp and machine checks. This gives us (4*65536+8+64*64+1+1) = 266250 interrupts. Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30 15:40:23 +08:00
r = __inject_vm(dev->kvm, inti);
if (r) {
kfree(inti);
return r;
}
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
len -= sizeof(struct kvm_s390_irq);
attr->addr += sizeof(struct kvm_s390_irq);
}
return r;
}
KVM: s390: adapter interrupt sources Add a new interface to register/deregister sources of adapter interrupts identified by an unique id via the flic. Adapters may also be maskable and carry a list of pinned pages. These adapters will be used by irq routing later. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15 19:36:01 +08:00
static struct s390_io_adapter *get_io_adapter(struct kvm *kvm, unsigned int id)
{
if (id >= MAX_S390_IO_ADAPTERS)
return NULL;
return kvm->arch.adapters[id];
}
static int register_io_adapter(struct kvm_device *dev,
struct kvm_device_attr *attr)
{
struct s390_io_adapter *adapter;
struct kvm_s390_io_adapter adapter_info;
if (copy_from_user(&adapter_info,
(void __user *)attr->addr, sizeof(adapter_info)))
return -EFAULT;
if ((adapter_info.id >= MAX_S390_IO_ADAPTERS) ||
(dev->kvm->arch.adapters[adapter_info.id] != NULL))
return -EINVAL;
adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
if (!adapter)
return -ENOMEM;
INIT_LIST_HEAD(&adapter->maps);
init_rwsem(&adapter->maps_lock);
atomic_set(&adapter->nr_maps, 0);
adapter->id = adapter_info.id;
adapter->isc = adapter_info.isc;
adapter->maskable = adapter_info.maskable;
adapter->masked = false;
adapter->swap = adapter_info.swap;
KVM: s390: interface for suppressible I/O adapters In order to properly implement adapter-interruption suppression, we need a way for userspace to specify which adapters are subject to suppression. Let's convert the existing (and unused) 'pad' field into a 'flags' field and define a flag value for suppressible adapters. Besides, add documentation for the interface. Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-01-20 00:02:26 +08:00
adapter->suppressible = (adapter_info.flags) &
KVM_S390_ADAPTER_SUPPRESSIBLE;
KVM: s390: adapter interrupt sources Add a new interface to register/deregister sources of adapter interrupts identified by an unique id via the flic. Adapters may also be maskable and carry a list of pinned pages. These adapters will be used by irq routing later. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15 19:36:01 +08:00
dev->kvm->arch.adapters[adapter->id] = adapter;
return 0;
}
int kvm_s390_mask_adapter(struct kvm *kvm, unsigned int id, bool masked)
{
int ret;
struct s390_io_adapter *adapter = get_io_adapter(kvm, id);
if (!adapter || !adapter->maskable)
return -EINVAL;
ret = adapter->masked;
adapter->masked = masked;
return ret;
}
static int kvm_s390_adapter_map(struct kvm *kvm, unsigned int id, __u64 addr)
{
struct s390_io_adapter *adapter = get_io_adapter(kvm, id);
struct s390_map_info *map;
int ret;
if (!adapter || !addr)
return -EINVAL;
map = kzalloc(sizeof(*map), GFP_KERNEL);
if (!map) {
ret = -ENOMEM;
goto out;
}
INIT_LIST_HEAD(&map->list);
map->guest_addr = addr;
KVM: s390/mm: cleanup gmap function arguments, variable names Make the order of arguments for the gmap calls more consistent, if the gmap pointer is passed it is always the first argument. In addition distinguish between guest address and user address by naming the variables gaddr for a guest address and vmaddr for a user address. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-29 15:34:41 +08:00
map->addr = gmap_translate(kvm->arch.gmap, addr);
KVM: s390: adapter interrupt sources Add a new interface to register/deregister sources of adapter interrupts identified by an unique id via the flic. Adapters may also be maskable and carry a list of pinned pages. These adapters will be used by irq routing later. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15 19:36:01 +08:00
if (map->addr == -EFAULT) {
ret = -EFAULT;
goto out;
}
ret = get_user_pages_fast(map->addr, 1, 1, &map->page);
if (ret < 0)
goto out;
BUG_ON(ret != 1);
down_write(&adapter->maps_lock);
if (atomic_inc_return(&adapter->nr_maps) < MAX_S390_ADAPTER_MAPS) {
list_add_tail(&map->list, &adapter->maps);
ret = 0;
} else {
put_page(map->page);
ret = -EINVAL;
}
up_write(&adapter->maps_lock);
out:
if (ret)
kfree(map);
return ret;
}
static int kvm_s390_adapter_unmap(struct kvm *kvm, unsigned int id, __u64 addr)
{
struct s390_io_adapter *adapter = get_io_adapter(kvm, id);
struct s390_map_info *map, *tmp;
int found = 0;
if (!adapter || !addr)
return -EINVAL;
down_write(&adapter->maps_lock);
list_for_each_entry_safe(map, tmp, &adapter->maps, list) {
if (map->guest_addr == addr) {
found = 1;
atomic_dec(&adapter->nr_maps);
list_del(&map->list);
put_page(map->page);
kfree(map);
break;
}
}
up_write(&adapter->maps_lock);
return found ? 0 : -EINVAL;
}
void kvm_s390_destroy_adapters(struct kvm *kvm)
{
int i;
struct s390_map_info *map, *tmp;
for (i = 0; i < MAX_S390_IO_ADAPTERS; i++) {
if (!kvm->arch.adapters[i])
continue;
list_for_each_entry_safe(map, tmp,
&kvm->arch.adapters[i]->maps, list) {
list_del(&map->list);
put_page(map->page);
kfree(map);
}
kfree(kvm->arch.adapters[i]);
}
}
static int modify_io_adapter(struct kvm_device *dev,
struct kvm_device_attr *attr)
{
struct kvm_s390_io_adapter_req req;
struct s390_io_adapter *adapter;
int ret;
if (copy_from_user(&req, (void __user *)attr->addr, sizeof(req)))
return -EFAULT;
adapter = get_io_adapter(dev->kvm, req.id);
if (!adapter)
return -EINVAL;
switch (req.type) {
case KVM_S390_IO_ADAPTER_MASK:
ret = kvm_s390_mask_adapter(dev->kvm, req.id, req.mask);
if (ret > 0)
ret = 0;
break;
case KVM_S390_IO_ADAPTER_MAP:
ret = kvm_s390_adapter_map(dev->kvm, req.id, req.addr);
break;
case KVM_S390_IO_ADAPTER_UNMAP:
ret = kvm_s390_adapter_unmap(dev->kvm, req.id, req.addr);
break;
default:
ret = -EINVAL;
}
return ret;
}
KVM: s390: add clear I/O irq operation for FLIC Introduce a FLIC operation for clearing I/O interrupts for a subchannel. Rationale: According to the platform specification, pending I/O interruption requests have to be revoked in certain situations. For instance, according to the Principles of Operation (page 17-27), a subchannel put into the installed parameters initialized state is in the same state as after an I/O system reset (just parameters possibly changed). This implies that any I/O interrupts for that subchannel are no longer pending (as I/O system resets clear I/O interrupts). Therefore, we need an interface to clear pending I/O interrupts. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-26 02:10:40 +08:00
static int clear_io_irq(struct kvm *kvm, struct kvm_device_attr *attr)
{
const u64 isc_mask = 0xffUL << 24; /* all iscs set */
u32 schid;
if (attr->flags)
return -EINVAL;
if (attr->attr != sizeof(schid))
return -EINVAL;
if (copy_from_user(&schid, (void __user *) attr->addr, sizeof(schid)))
return -EFAULT;
kfree(kvm_s390_get_io_int(kvm, isc_mask, schid));
/*
* If userspace is conforming to the architecture, we can have at most
* one pending I/O interrupt per subchannel, so this is effectively a
* clear all.
*/
return 0;
}
KVM: s390: introduce ais mode modify function Provide an interface for userspace to modify AIS (adapter-interruption-suppression) mode state, and add documentation for the interface. Allowed target modes are ALL-Interruptions mode and SINGLE-Interruption mode. We introduce the 'simm' and 'nimm' fields in kvm_s390_float_interrupt to store interruption modes for each ISC. Each bit in 'simm' and 'nimm' targets to one ISC, and collaboratively indicate three modes: ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This interface can initiate most transitions between the states; transition from SINGLE-Interruption to NO-Interruptions via adapter interrupt injection will be introduced in a following patch. The meaningful combinations are as follows: interruption mode | simm bit | nimm bit ------------------|----------|---------- ALL | 0 | 0 SINGLE | 1 | 0 NO | 1 | 1 Besides, add tracepoint to track AIS mode transitions. Co-Authored-By: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-02-17 17:06:26 +08:00
static int modify_ais_mode(struct kvm *kvm, struct kvm_device_attr *attr)
{
struct kvm_s390_float_interrupt *fi = &kvm->arch.float_int;
struct kvm_s390_ais_req req;
int ret = 0;
if (!fi->ais_enabled)
return -ENOTSUPP;
if (copy_from_user(&req, (void __user *)attr->addr, sizeof(req)))
return -EFAULT;
if (req.isc > MAX_ISC)
return -EINVAL;
trace_kvm_s390_modify_ais_mode(req.isc,
(fi->simm & AIS_MODE_MASK(req.isc)) ?
(fi->nimm & AIS_MODE_MASK(req.isc)) ?
2 : KVM_S390_AIS_MODE_SINGLE :
KVM_S390_AIS_MODE_ALL, req.mode);
mutex_lock(&fi->ais_lock);
switch (req.mode) {
case KVM_S390_AIS_MODE_ALL:
fi->simm &= ~AIS_MODE_MASK(req.isc);
fi->nimm &= ~AIS_MODE_MASK(req.isc);
break;
case KVM_S390_AIS_MODE_SINGLE:
fi->simm |= AIS_MODE_MASK(req.isc);
fi->nimm &= ~AIS_MODE_MASK(req.isc);
break;
default:
ret = -EINVAL;
}
mutex_unlock(&fi->ais_lock);
return ret;
}
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
{
int r = 0;
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
unsigned int i;
struct kvm_vcpu *vcpu;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
switch (attr->group) {
case KVM_DEV_FLIC_ENQUEUE:
r = enqueue_floating_irq(dev, attr);
break;
case KVM_DEV_FLIC_CLEAR_IRQS:
KVM: s390: Drop pending interrupts on guest exit On hard exits (abort, sigkill) we have have some kvm_s390_interrupt_info structures hanging around. Delete those on exit to avoid memory leaks. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2014-03-26 00:09:08 +08:00
kvm_s390_clear_float_irqs(dev->kvm);
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
break;
KVM: async_pf: Async page fault support on s390 This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 23:11:48 +08:00
case KVM_DEV_FLIC_APF_ENABLE:
dev->kvm->arch.gmap->pfault_enabled = 1;
break;
case KVM_DEV_FLIC_APF_DISABLE_WAIT:
dev->kvm->arch.gmap->pfault_enabled = 0;
/*
* Make sure no async faults are in transition when
* clearing the queues. So we don't need to worry
* about late coming workers.
*/
synchronize_srcu(&dev->kvm->srcu);
kvm_for_each_vcpu(i, vcpu, dev->kvm)
kvm_clear_async_pf_completion_queue(vcpu);
break;
KVM: s390: adapter interrupt sources Add a new interface to register/deregister sources of adapter interrupts identified by an unique id via the flic. Adapters may also be maskable and carry a list of pinned pages. These adapters will be used by irq routing later. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15 19:36:01 +08:00
case KVM_DEV_FLIC_ADAPTER_REGISTER:
r = register_io_adapter(dev, attr);
break;
case KVM_DEV_FLIC_ADAPTER_MODIFY:
r = modify_io_adapter(dev, attr);
break;
KVM: s390: add clear I/O irq operation for FLIC Introduce a FLIC operation for clearing I/O interrupts for a subchannel. Rationale: According to the platform specification, pending I/O interruption requests have to be revoked in certain situations. For instance, according to the Principles of Operation (page 17-27), a subchannel put into the installed parameters initialized state is in the same state as after an I/O system reset (just parameters possibly changed). This implies that any I/O interrupts for that subchannel are no longer pending (as I/O system resets clear I/O interrupts). Therefore, we need an interface to clear pending I/O interrupts. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-26 02:10:40 +08:00
case KVM_DEV_FLIC_CLEAR_IO_IRQ:
r = clear_io_irq(dev->kvm, attr);
break;
KVM: s390: introduce ais mode modify function Provide an interface for userspace to modify AIS (adapter-interruption-suppression) mode state, and add documentation for the interface. Allowed target modes are ALL-Interruptions mode and SINGLE-Interruption mode. We introduce the 'simm' and 'nimm' fields in kvm_s390_float_interrupt to store interruption modes for each ISC. Each bit in 'simm' and 'nimm' targets to one ISC, and collaboratively indicate three modes: ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This interface can initiate most transitions between the states; transition from SINGLE-Interruption to NO-Interruptions via adapter interrupt injection will be introduced in a following patch. The meaningful combinations are as follows: interruption mode | simm bit | nimm bit ------------------|----------|---------- ALL | 0 | 0 SINGLE | 1 | 0 NO | 1 | 1 Besides, add tracepoint to track AIS mode transitions. Co-Authored-By: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-02-17 17:06:26 +08:00
case KVM_DEV_FLIC_AISM:
r = modify_ais_mode(dev->kvm, attr);
break;
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
default:
r = -EINVAL;
}
return r;
}
KVM: s390: implement has_attr for FLIC HAS_ATTR is useful for determining the supported attributes; let's implement it. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-02-25 19:44:17 +08:00
static int flic_has_attr(struct kvm_device *dev,
struct kvm_device_attr *attr)
{
switch (attr->group) {
case KVM_DEV_FLIC_GET_ALL_IRQS:
case KVM_DEV_FLIC_ENQUEUE:
case KVM_DEV_FLIC_CLEAR_IRQS:
case KVM_DEV_FLIC_APF_ENABLE:
case KVM_DEV_FLIC_APF_DISABLE_WAIT:
case KVM_DEV_FLIC_ADAPTER_REGISTER:
case KVM_DEV_FLIC_ADAPTER_MODIFY:
KVM: s390: add clear I/O irq operation for FLIC Introduce a FLIC operation for clearing I/O interrupts for a subchannel. Rationale: According to the platform specification, pending I/O interruption requests have to be revoked in certain situations. For instance, according to the Principles of Operation (page 17-27), a subchannel put into the installed parameters initialized state is in the same state as after an I/O system reset (just parameters possibly changed). This implies that any I/O interrupts for that subchannel are no longer pending (as I/O system resets clear I/O interrupts). Therefore, we need an interface to clear pending I/O interrupts. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-26 02:10:40 +08:00
case KVM_DEV_FLIC_CLEAR_IO_IRQ:
KVM: s390: introduce ais mode modify function Provide an interface for userspace to modify AIS (adapter-interruption-suppression) mode state, and add documentation for the interface. Allowed target modes are ALL-Interruptions mode and SINGLE-Interruption mode. We introduce the 'simm' and 'nimm' fields in kvm_s390_float_interrupt to store interruption modes for each ISC. Each bit in 'simm' and 'nimm' targets to one ISC, and collaboratively indicate three modes: ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This interface can initiate most transitions between the states; transition from SINGLE-Interruption to NO-Interruptions via adapter interrupt injection will be introduced in a following patch. The meaningful combinations are as follows: interruption mode | simm bit | nimm bit ------------------|----------|---------- ALL | 0 | 0 SINGLE | 1 | 0 NO | 1 | 1 Besides, add tracepoint to track AIS mode transitions. Co-Authored-By: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-02-17 17:06:26 +08:00
case KVM_DEV_FLIC_AISM:
KVM: s390: implement has_attr for FLIC HAS_ATTR is useful for determining the supported attributes; let's implement it. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-02-25 19:44:17 +08:00
return 0;
}
return -ENXIO;
}
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
static int flic_create(struct kvm_device *dev, u32 type)
{
if (!dev)
return -EINVAL;
if (dev->kvm->arch.flic)
return -EINVAL;
dev->kvm->arch.flic = dev;
return 0;
}
static void flic_destroy(struct kvm_device *dev)
{
dev->kvm->arch.flic = NULL;
kfree(dev);
}
/* s390 floating irq controller (flic) */
struct kvm_device_ops kvm_flic_ops = {
.name = "kvm-flic",
.get_attr = flic_get_attr,
.set_attr = flic_set_attr,
KVM: s390: implement has_attr for FLIC HAS_ATTR is useful for determining the supported attributes; let's implement it. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-02-25 19:44:17 +08:00
.has_attr = flic_has_attr,
KVM: s390: add floating irq controller This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-10-07 22:13:45 +08:00
.create = flic_create,
.destroy = flic_destroy,
};
KVM: s390: irq routing for adapter interrupts. Introduce a new interrupt class for s390 adapter interrupts and enable irqfds for s390. This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP, that needs to be enabled by userspace. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15 19:36:01 +08:00
static unsigned long get_ind_bit(__u64 addr, unsigned long bit_nr, bool swap)
{
unsigned long bit;
bit = bit_nr + (addr % PAGE_SIZE) * 8;
return swap ? (bit ^ (BITS_PER_LONG - 1)) : bit;
}
static struct s390_map_info *get_map_info(struct s390_io_adapter *adapter,
u64 addr)
{
struct s390_map_info *map;
if (!adapter)
return NULL;
list_for_each_entry(map, &adapter->maps, list) {
if (map->guest_addr == addr)
return map;
}
return NULL;
}
static int adapter_indicators_set(struct kvm *kvm,
struct s390_io_adapter *adapter,
struct kvm_s390_adapter_int *adapter_int)
{
unsigned long bit;
int summary_set, idx;
struct s390_map_info *info;
void *map;
info = get_map_info(adapter, adapter_int->ind_addr);
if (!info)
return -1;
map = page_address(info->page);
bit = get_ind_bit(info->addr, adapter_int->ind_offset, adapter->swap);
set_bit(bit, map);
idx = srcu_read_lock(&kvm->srcu);
mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT);
set_page_dirty_lock(info->page);
info = get_map_info(adapter, adapter_int->summary_addr);
if (!info) {
srcu_read_unlock(&kvm->srcu, idx);
return -1;
}
map = page_address(info->page);
bit = get_ind_bit(info->addr, adapter_int->summary_offset,
adapter->swap);
summary_set = test_and_set_bit(bit, map);
mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT);
set_page_dirty_lock(info->page);
srcu_read_unlock(&kvm->srcu, idx);
return summary_set ? 0 : 1;
}
/*
* < 0 - not injected due to error
* = 0 - coalesced, summary indicator already active
* > 0 - injected interrupt
*/
static int set_adapter_int(struct kvm_kernel_irq_routing_entry *e,
struct kvm *kvm, int irq_source_id, int level,
bool line_status)
{
int ret;
struct s390_io_adapter *adapter;
/* We're only interested in the 0->1 transition. */
if (!level)
return 0;
adapter = get_io_adapter(kvm, e->adapter.adapter_id);
if (!adapter)
return -1;
down_read(&adapter->maps_lock);
ret = adapter_indicators_set(kvm, adapter, &e->adapter);
up_read(&adapter->maps_lock);
if ((ret > 0) && !adapter->masked) {
struct kvm_s390_interrupt s390int = {
.type = KVM_S390_INT_IO(1, 0, 0, 0),
.parm = 0,
.parm64 = (adapter->isc << 27) | 0x80000000,
};
ret = kvm_s390_inject_vm(kvm, &s390int);
if (ret == 0)
ret = 1;
}
return ret;
}
KVM: pass struct kvm to kvm_set_routing_entry Arch-specific code will use it. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 04:09:26 +08:00
int kvm_set_routing_entry(struct kvm *kvm,
struct kvm_kernel_irq_routing_entry *e,
KVM: s390: irq routing for adapter interrupts. Introduce a new interrupt class for s390 adapter interrupts and enable irqfds for s390. This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP, that needs to be enabled by userspace. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15 19:36:01 +08:00
const struct kvm_irq_routing_entry *ue)
{
int ret;
switch (ue->type) {
case KVM_IRQ_ROUTING_S390_ADAPTER:
e->set = set_adapter_int;
e->adapter.summary_addr = ue->u.adapter.summary_addr;
e->adapter.ind_addr = ue->u.adapter.ind_addr;
e->adapter.summary_offset = ue->u.adapter.summary_offset;
e->adapter.ind_offset = ue->u.adapter.ind_offset;
e->adapter.adapter_id = ue->u.adapter.adapter_id;
ret = 0;
break;
default:
ret = -EINVAL;
}
return ret;
}
int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, struct kvm *kvm,
int irq_source_id, int level, bool line_status)
{
return -EINVAL;
}
KVM: s390: migrate vcpu interrupt state This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls are added which get/set the complete status of pending interrupts in one go. The ioctls are marked as available with the new capability KVM_CAP_S390_IRQ_STATE. We can not use a ONEREG, as the number of pending local interrupts is not constant and depends on the number of CPUs. To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE. Its input parameter is a pointer to a struct kvm_s390_irq_state which has a buffer and length. For all currently pending interrupts, we copy a struct kvm_s390_irq into the buffer and pass it to userspace. To store interrupt state into a buffer provided by userspace, we add an ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into the kernel and injects all interrupts contained in the buffer. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-11-25 00:13:46 +08:00
int kvm_s390_set_irq_state(struct kvm_vcpu *vcpu, void __user *irqstate, int len)
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
struct kvm_s390_irq *buf;
int r = 0;
int n;
buf = vmalloc(len);
if (!buf)
return -ENOMEM;
if (copy_from_user((void *) buf, irqstate, len)) {
r = -EFAULT;
goto out_free;
}
/*
* Don't allow setting the interrupt state
* when there are already interrupts pending
*/
spin_lock(&li->lock);
if (li->pending_irqs) {
r = -EBUSY;
goto out_unlock;
}
for (n = 0; n < len / sizeof(*buf); n++) {
r = do_inject_vcpu(vcpu, &buf[n]);
if (r)
break;
}
out_unlock:
spin_unlock(&li->lock);
out_free:
vfree(buf);
return r;
}
static void store_local_irq(struct kvm_s390_local_interrupt *li,
struct kvm_s390_irq *irq,
unsigned long irq_type)
{
switch (irq_type) {
case IRQ_PEND_MCHK_EX:
case IRQ_PEND_MCHK_REP:
irq->type = KVM_S390_MCHK;
irq->u.mchk = li->irq.mchk;
break;
case IRQ_PEND_PROG:
irq->type = KVM_S390_PROGRAM_INT;
irq->u.pgm = li->irq.pgm;
break;
case IRQ_PEND_PFAULT_INIT:
irq->type = KVM_S390_INT_PFAULT_INIT;
irq->u.ext = li->irq.ext;
break;
case IRQ_PEND_EXT_EXTERNAL:
irq->type = KVM_S390_INT_EXTERNAL_CALL;
irq->u.extcall = li->irq.extcall;
break;
case IRQ_PEND_EXT_CLOCK_COMP:
irq->type = KVM_S390_INT_CLOCK_COMP;
break;
case IRQ_PEND_EXT_CPU_TIMER:
irq->type = KVM_S390_INT_CPU_TIMER;
break;
case IRQ_PEND_SIGP_STOP:
irq->type = KVM_S390_SIGP_STOP;
irq->u.stop = li->irq.stop;
break;
case IRQ_PEND_RESTART:
irq->type = KVM_S390_RESTART;
break;
case IRQ_PEND_SET_PREFIX:
irq->type = KVM_S390_SIGP_SET_PREFIX;
irq->u.prefix = li->irq.prefix;
break;
}
}
int kvm_s390_get_irq_state(struct kvm_vcpu *vcpu, __u8 __user *buf, int len)
{
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
int scn;
KVM: s390: migrate vcpu interrupt state This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls are added which get/set the complete status of pending interrupts in one go. The ioctls are marked as available with the new capability KVM_CAP_S390_IRQ_STATE. We can not use a ONEREG, as the number of pending local interrupts is not constant and depends on the number of CPUs. To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE. Its input parameter is a pointer to a struct kvm_s390_irq_state which has a buffer and length. For all currently pending interrupts, we copy a struct kvm_s390_irq into the buffer and pass it to userspace. To store interrupt state into a buffer provided by userspace, we add an ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into the kernel and injects all interrupts contained in the buffer. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-11-25 00:13:46 +08:00
unsigned long sigp_emerg_pending[BITS_TO_LONGS(KVM_MAX_VCPUS)];
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
unsigned long pending_irqs;
struct kvm_s390_irq irq;
unsigned long irq_type;
int cpuaddr;
int n = 0;
spin_lock(&li->lock);
pending_irqs = li->pending_irqs;
memcpy(&sigp_emerg_pending, &li->sigp_emerg_pending,
sizeof(sigp_emerg_pending));
spin_unlock(&li->lock);
for_each_set_bit(irq_type, &pending_irqs, IRQ_PEND_COUNT) {
memset(&irq, 0, sizeof(irq));
if (irq_type == IRQ_PEND_EXT_EMERGENCY)
continue;
if (n + sizeof(irq) > len)
return -ENOBUFS;
store_local_irq(&vcpu->arch.local_int, &irq, irq_type);
if (copy_to_user(&buf[n], &irq, sizeof(irq)))
return -EFAULT;
n += sizeof(irq);
}
if (test_bit(IRQ_PEND_EXT_EMERGENCY, &pending_irqs)) {
for_each_set_bit(cpuaddr, sigp_emerg_pending, KVM_MAX_VCPUS) {
memset(&irq, 0, sizeof(irq));
if (n + sizeof(irq) > len)
return -ENOBUFS;
irq.type = KVM_S390_INT_EMERGENCY;
irq.u.emerg.code = cpuaddr;
if (copy_to_user(&buf[n], &irq, sizeof(irq)))
return -EFAULT;
n += sizeof(irq);
}
}
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
if (sca_ext_call_pending(vcpu, &scn)) {
KVM: s390: migrate vcpu interrupt state This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls are added which get/set the complete status of pending interrupts in one go. The ioctls are marked as available with the new capability KVM_CAP_S390_IRQ_STATE. We can not use a ONEREG, as the number of pending local interrupts is not constant and depends on the number of CPUs. To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE. Its input parameter is a pointer to a struct kvm_s390_irq_state which has a buffer and length. For all currently pending interrupts, we copy a struct kvm_s390_irq into the buffer and pass it to userspace. To store interrupt state into a buffer provided by userspace, we add an ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into the kernel and injects all interrupts contained in the buffer. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-11-25 00:13:46 +08:00
if (n + sizeof(irq) > len)
return -ENOBUFS;
memset(&irq, 0, sizeof(irq));
irq.type = KVM_S390_INT_EXTERNAL_CALL;
KVM: s390: Generalize access to SIGP controls This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-04-21 21:10:10 +08:00
irq.u.extcall.code = scn;
KVM: s390: migrate vcpu interrupt state This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls are added which get/set the complete status of pending interrupts in one go. The ioctls are marked as available with the new capability KVM_CAP_S390_IRQ_STATE. We can not use a ONEREG, as the number of pending local interrupts is not constant and depends on the number of CPUs. To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE. Its input parameter is a pointer to a struct kvm_s390_irq_state which has a buffer and length. For all currently pending interrupts, we copy a struct kvm_s390_irq into the buffer and pass it to userspace. To store interrupt state into a buffer provided by userspace, we add an ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into the kernel and injects all interrupts contained in the buffer. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-11-25 00:13:46 +08:00
if (copy_to_user(&buf[n], &irq, sizeof(irq)))
return -EFAULT;
n += sizeof(irq);
}
return n;
}