2019-05-29 01:10:04 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2012-03-22 21:04:09 +08:00
|
|
|
/*
|
|
|
|
* Regulator driver for tps65090 power management chip.
|
|
|
|
*
|
|
|
|
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
|
|
|
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
2014-04-23 23:56:05 +08:00
|
|
|
#include <linux/delay.h>
|
2012-03-22 21:04:09 +08:00
|
|
|
#include <linux/init.h>
|
2018-05-14 16:06:33 +08:00
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/gpio/consumer.h>
|
2012-03-22 21:04:09 +08:00
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/regulator/driver.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
2013-01-29 17:05:16 +08:00
|
|
|
#include <linux/regulator/of_regulator.h>
|
2012-03-22 21:04:09 +08:00
|
|
|
#include <linux/mfd/tps65090.h>
|
|
|
|
|
2014-04-23 23:56:05 +08:00
|
|
|
#define MAX_CTRL_READ_TRIES 5
|
|
|
|
#define MAX_FET_ENABLE_TRIES 1000
|
|
|
|
|
|
|
|
#define CTRL_EN_BIT 0 /* Regulator enable bit, active high */
|
2014-04-17 07:12:28 +08:00
|
|
|
#define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */
|
2014-04-23 23:56:05 +08:00
|
|
|
#define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */
|
|
|
|
#define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */
|
2014-04-17 07:12:28 +08:00
|
|
|
|
|
|
|
#define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct tps65090_regulator - Per-regulator data for a tps65090 regulator
|
|
|
|
*
|
|
|
|
* @dev: Pointer to our device.
|
|
|
|
* @desc: The struct regulator_desc for the regulator.
|
|
|
|
* @rdev: The struct regulator_dev for the regulator.
|
|
|
|
* @overcurrent_wait_valid: True if overcurrent_wait is valid.
|
|
|
|
* @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
|
|
|
|
*/
|
|
|
|
|
2012-03-22 21:04:09 +08:00
|
|
|
struct tps65090_regulator {
|
|
|
|
struct device *dev;
|
2012-10-09 17:48:59 +08:00
|
|
|
struct regulator_desc *desc;
|
|
|
|
struct regulator_dev *rdev;
|
2014-04-17 07:12:28 +08:00
|
|
|
bool overcurrent_wait_valid;
|
|
|
|
int overcurrent_wait;
|
2012-03-22 21:04:09 +08:00
|
|
|
};
|
|
|
|
|
2020-08-30 06:11:01 +08:00
|
|
|
static const struct regulator_ops tps65090_ext_control_ops = {
|
2012-10-09 17:49:02 +08:00
|
|
|
};
|
|
|
|
|
2014-04-17 07:12:28 +08:00
|
|
|
/**
|
|
|
|
* tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
|
|
|
|
*
|
|
|
|
* This will set the overcurrent wait time based on what's in the regulator
|
|
|
|
* info.
|
|
|
|
*
|
|
|
|
* @ri: Overall regulator data
|
|
|
|
* @rdev: Regulator device
|
|
|
|
*
|
|
|
|
* Return: 0 if no error, non-zero if there was an error writing the register.
|
|
|
|
*/
|
|
|
|
static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri,
|
|
|
|
struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
|
|
MAX_OVERCURRENT_WAIT << CTRL_WT_BIT,
|
|
|
|
ri->overcurrent_wait << CTRL_WT_BIT);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n",
|
|
|
|
rdev->desc->enable_reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-04-23 23:56:05 +08:00
|
|
|
/**
|
|
|
|
* tps65090_try_enable_fet - Try to enable a FET
|
|
|
|
*
|
|
|
|
* @rdev: Regulator device
|
|
|
|
*
|
|
|
|
* Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
|
|
|
|
* set, or some other -ve value if another error occurred (e.g. i2c error)
|
|
|
|
*/
|
|
|
|
static int tps65090_try_enable_fet(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
unsigned int control;
|
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
|
|
rdev->desc->enable_mask,
|
|
|
|
rdev->desc->enable_mask);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&rdev->dev, "Error in updating reg %#x\n",
|
|
|
|
rdev->desc->enable_reg);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < MAX_CTRL_READ_TRIES; i++) {
|
|
|
|
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg,
|
|
|
|
&control);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (!(control & BIT(CTRL_TO_BIT)))
|
|
|
|
break;
|
|
|
|
|
|
|
|
usleep_range(1000, 1500);
|
|
|
|
}
|
|
|
|
if (!(control & BIT(CTRL_PG_BIT)))
|
|
|
|
return -ENOTRECOVERABLE;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* tps65090_fet_enable - Enable a FET, trying a few times if it fails
|
|
|
|
*
|
|
|
|
* Some versions of the tps65090 have issues when turning on the FETs.
|
|
|
|
* This function goes through several steps to ensure the best chance of the
|
|
|
|
* FET going on. Specifically:
|
|
|
|
* - We'll make sure that we bump the "overcurrent wait" to the maximum, which
|
|
|
|
* increases the chances that we'll turn on properly.
|
|
|
|
* - We'll retry turning the FET on multiple times (turning off in between).
|
|
|
|
*
|
|
|
|
* @rdev: Regulator device
|
|
|
|
*
|
|
|
|
* Return: 0 if ok, non-zero if it fails.
|
|
|
|
*/
|
|
|
|
static int tps65090_fet_enable(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
int ret, tries;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try enabling multiple times until we succeed since sometimes the
|
|
|
|
* first try times out.
|
|
|
|
*/
|
|
|
|
tries = 0;
|
|
|
|
while (true) {
|
|
|
|
ret = tps65090_try_enable_fet(rdev);
|
|
|
|
if (!ret)
|
|
|
|
break;
|
|
|
|
if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Try turning the FET off (and then on again) */
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
|
|
rdev->desc->enable_mask, 0);
|
|
|
|
if (ret)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
tries++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tries)
|
|
|
|
dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n",
|
|
|
|
rdev->desc->enable_reg, tries);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
err:
|
|
|
|
dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg);
|
|
|
|
WARN_ON(1);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2020-08-30 06:11:01 +08:00
|
|
|
static const struct regulator_ops tps65090_reg_control_ops = {
|
2012-10-09 17:49:02 +08:00
|
|
|
.enable = regulator_enable_regmap,
|
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
2012-03-22 21:04:09 +08:00
|
|
|
};
|
|
|
|
|
2020-08-30 06:11:01 +08:00
|
|
|
static const struct regulator_ops tps65090_fet_control_ops = {
|
2014-04-23 23:56:05 +08:00
|
|
|
.enable = tps65090_fet_enable,
|
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
};
|
|
|
|
|
2020-08-30 06:11:01 +08:00
|
|
|
static const struct regulator_ops tps65090_ldo_ops = {
|
2012-10-09 17:49:01 +08:00
|
|
|
};
|
|
|
|
|
2014-07-31 20:31:05 +08:00
|
|
|
#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
|
2012-03-22 21:04:09 +08:00
|
|
|
{ \
|
2012-10-09 17:48:59 +08:00
|
|
|
.name = "TPS65090_RAILS"#_id, \
|
|
|
|
.supply_name = _sname, \
|
2012-10-09 17:49:00 +08:00
|
|
|
.id = TPS65090_REGULATOR_##_id, \
|
2014-07-31 20:31:05 +08:00
|
|
|
.n_voltages = _nvolt, \
|
2012-10-09 17:48:59 +08:00
|
|
|
.ops = &_ops, \
|
2014-07-31 20:31:05 +08:00
|
|
|
.fixed_uV = _volt, \
|
2012-10-09 17:48:59 +08:00
|
|
|
.enable_reg = _en_reg, \
|
2014-04-23 23:56:05 +08:00
|
|
|
.enable_val = _en_bits, \
|
|
|
|
.enable_mask = _en_bits, \
|
2012-10-09 17:48:59 +08:00
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
2012-03-22 21:04:09 +08:00
|
|
|
}
|
|
|
|
|
2014-07-31 20:31:05 +08:00
|
|
|
#define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
|
|
|
|
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
|
|
|
|
|
|
|
|
#define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
|
|
|
|
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
|
|
|
|
|
2012-10-09 17:48:59 +08:00
|
|
|
static struct regulator_desc tps65090_regulator_desc[] = {
|
2014-07-31 20:31:05 +08:00
|
|
|
tps65090_REG_FIXEDV(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT), 5000000,
|
|
|
|
tps65090_reg_control_ops),
|
|
|
|
tps65090_REG_FIXEDV(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT), 3300000,
|
|
|
|
tps65090_reg_control_ops),
|
|
|
|
tps65090_REG_SWITCH(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT),
|
|
|
|
tps65090_reg_control_ops),
|
|
|
|
|
|
|
|
tps65090_REG_SWITCH(FET1, "infet1", 0x0F,
|
|
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
|
|
tps65090_fet_control_ops),
|
|
|
|
tps65090_REG_SWITCH(FET2, "infet2", 0x10,
|
|
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
|
|
tps65090_fet_control_ops),
|
|
|
|
tps65090_REG_SWITCH(FET3, "infet3", 0x11,
|
|
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
|
|
tps65090_fet_control_ops),
|
|
|
|
tps65090_REG_SWITCH(FET4, "infet4", 0x12,
|
|
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
|
|
tps65090_fet_control_ops),
|
|
|
|
tps65090_REG_SWITCH(FET5, "infet5", 0x13,
|
|
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
|
|
tps65090_fet_control_ops),
|
|
|
|
tps65090_REG_SWITCH(FET6, "infet6", 0x14,
|
|
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
|
|
tps65090_fet_control_ops),
|
|
|
|
tps65090_REG_SWITCH(FET7, "infet7", 0x15,
|
|
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
|
|
tps65090_fet_control_ops),
|
|
|
|
|
|
|
|
tps65090_REG_FIXEDV(LDO1, "vsys-l1", 0, 0, 5000000,
|
|
|
|
tps65090_ldo_ops),
|
|
|
|
tps65090_REG_FIXEDV(LDO2, "vsys-l2", 0, 0, 3300000,
|
|
|
|
tps65090_ldo_ops),
|
2012-03-22 21:04:09 +08:00
|
|
|
};
|
|
|
|
|
2012-10-09 17:48:59 +08:00
|
|
|
static inline bool is_dcdc(int id)
|
2012-03-22 21:04:09 +08:00
|
|
|
{
|
2012-10-09 17:48:59 +08:00
|
|
|
switch (id) {
|
2012-10-09 17:49:00 +08:00
|
|
|
case TPS65090_REGULATOR_DCDC1:
|
|
|
|
case TPS65090_REGULATOR_DCDC2:
|
|
|
|
case TPS65090_REGULATOR_DCDC3:
|
2012-10-09 17:48:59 +08:00
|
|
|
return true;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
2012-03-22 21:04:09 +08:00
|
|
|
|
2012-11-20 02:22:22 +08:00
|
|
|
static int tps65090_config_ext_control(
|
2012-10-09 17:48:59 +08:00
|
|
|
struct tps65090_regulator *ri, bool enable)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct device *parent = ri->dev->parent;
|
|
|
|
unsigned int reg_en_reg = ri->desc->enable_reg;
|
|
|
|
|
|
|
|
if (enable)
|
|
|
|
ret = tps65090_set_bits(parent, reg_en_reg, 1);
|
|
|
|
else
|
|
|
|
ret = tps65090_clr_bits(parent, reg_en_reg, 1);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-11-20 02:22:22 +08:00
|
|
|
static int tps65090_regulator_disable_ext_control(
|
2012-10-09 17:48:59 +08:00
|
|
|
struct tps65090_regulator *ri,
|
|
|
|
struct tps65090_regulator_plat_data *tps_pdata)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
struct device *parent = ri->dev->parent;
|
|
|
|
unsigned int reg_en_reg = ri->desc->enable_reg;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* First enable output for internal control if require.
|
|
|
|
* And then disable external control.
|
|
|
|
*/
|
|
|
|
if (tps_pdata->reg_init_data->constraints.always_on ||
|
|
|
|
tps_pdata->reg_init_data->constraints.boot_on) {
|
|
|
|
ret = tps65090_set_bits(parent, reg_en_reg, 0);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg);
|
|
|
|
return ret;
|
|
|
|
}
|
2012-03-22 21:04:09 +08:00
|
|
|
}
|
2012-10-09 17:48:59 +08:00
|
|
|
return tps65090_config_ext_control(ri, false);
|
2012-03-22 21:04:09 +08:00
|
|
|
}
|
|
|
|
|
2013-01-29 17:05:16 +08:00
|
|
|
#ifdef CONFIG_OF
|
|
|
|
static struct of_regulator_match tps65090_matches[] = {
|
|
|
|
{ .name = "dcdc1", },
|
|
|
|
{ .name = "dcdc2", },
|
|
|
|
{ .name = "dcdc3", },
|
|
|
|
{ .name = "fet1", },
|
|
|
|
{ .name = "fet2", },
|
|
|
|
{ .name = "fet3", },
|
|
|
|
{ .name = "fet4", },
|
|
|
|
{ .name = "fet5", },
|
|
|
|
{ .name = "fet6", },
|
|
|
|
{ .name = "fet7", },
|
|
|
|
{ .name = "ldo1", },
|
|
|
|
{ .name = "ldo2", },
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
|
|
|
|
struct platform_device *pdev,
|
|
|
|
struct of_regulator_match **tps65090_reg_matches)
|
|
|
|
{
|
|
|
|
struct tps65090_platform_data *tps65090_pdata;
|
|
|
|
struct device_node *np = pdev->dev.parent->of_node;
|
|
|
|
struct device_node *regulators;
|
|
|
|
int idx = 0, ret;
|
|
|
|
struct tps65090_regulator_plat_data *reg_pdata;
|
|
|
|
|
|
|
|
tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata),
|
|
|
|
GFP_KERNEL);
|
2014-02-20 16:53:15 +08:00
|
|
|
if (!tps65090_pdata)
|
2013-01-29 17:05:16 +08:00
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
devm_kzalloc(handle, a * b, gfp)
with:
devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
devm_kzalloc(handle, a * b * c, gfp)
with:
devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
|
|
|
reg_pdata = devm_kcalloc(&pdev->dev,
|
|
|
|
TPS65090_REGULATOR_MAX, sizeof(*reg_pdata),
|
|
|
|
GFP_KERNEL);
|
2014-02-20 16:53:15 +08:00
|
|
|
if (!reg_pdata)
|
2013-01-29 17:05:16 +08:00
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
2013-10-08 22:01:02 +08:00
|
|
|
regulators = of_get_child_by_name(np, "regulators");
|
2013-01-29 17:05:16 +08:00
|
|
|
if (!regulators) {
|
|
|
|
dev_err(&pdev->dev, "regulator node not found\n");
|
|
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
}
|
|
|
|
|
2013-01-30 20:28:20 +08:00
|
|
|
ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches,
|
2013-01-29 17:05:16 +08:00
|
|
|
ARRAY_SIZE(tps65090_matches));
|
2014-02-17 17:03:37 +08:00
|
|
|
of_node_put(regulators);
|
2013-01-29 17:05:16 +08:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Error parsing regulator init data: %d\n", ret);
|
|
|
|
return ERR_PTR(ret);
|
|
|
|
}
|
|
|
|
|
|
|
|
*tps65090_reg_matches = tps65090_matches;
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
|
|
|
|
struct regulator_init_data *ri_data;
|
|
|
|
struct tps65090_regulator_plat_data *rpdata;
|
2019-10-05 07:10:13 +08:00
|
|
|
struct device_node *np;
|
2013-01-29 17:05:16 +08:00
|
|
|
|
|
|
|
rpdata = ®_pdata[idx];
|
|
|
|
ri_data = tps65090_matches[idx].init_data;
|
2019-10-05 07:10:13 +08:00
|
|
|
if (!ri_data)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
np = tps65090_matches[idx].of_node;
|
|
|
|
if (!np)
|
2013-01-29 17:05:16 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
rpdata->reg_init_data = ri_data;
|
2019-10-05 07:10:13 +08:00
|
|
|
rpdata->enable_ext_control = of_property_read_bool(np,
|
|
|
|
"ti,enable-ext-control");
|
2018-05-14 16:06:33 +08:00
|
|
|
if (rpdata->enable_ext_control) {
|
|
|
|
enum gpiod_flags gflags;
|
|
|
|
|
|
|
|
if (ri_data->constraints.always_on ||
|
|
|
|
ri_data->constraints.boot_on)
|
|
|
|
gflags = GPIOD_OUT_HIGH;
|
|
|
|
else
|
|
|
|
gflags = GPIOD_OUT_LOW;
|
2018-10-15 17:02:40 +08:00
|
|
|
gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
|
2018-05-14 16:06:33 +08:00
|
|
|
|
2019-10-05 07:10:13 +08:00
|
|
|
rpdata->gpiod = devm_fwnode_gpiod_get(
|
|
|
|
&pdev->dev,
|
|
|
|
of_fwnode_handle(np),
|
|
|
|
"dcdc-ext-control",
|
|
|
|
gflags,
|
|
|
|
"tps65090");
|
2019-06-21 05:37:08 +08:00
|
|
|
if (PTR_ERR(rpdata->gpiod) == -ENOENT) {
|
2018-05-14 16:06:33 +08:00
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"could not find DCDC external control GPIO\n");
|
2019-06-21 05:37:08 +08:00
|
|
|
rpdata->gpiod = NULL;
|
|
|
|
} else if (IS_ERR(rpdata->gpiod))
|
|
|
|
return ERR_CAST(rpdata->gpiod);
|
2018-05-14 16:06:33 +08:00
|
|
|
}
|
2013-01-29 17:05:16 +08:00
|
|
|
|
2019-10-05 07:10:13 +08:00
|
|
|
if (of_property_read_u32(np, "ti,overcurrent-wait",
|
2014-04-17 07:12:28 +08:00
|
|
|
&rpdata->overcurrent_wait) == 0)
|
|
|
|
rpdata->overcurrent_wait_valid = true;
|
|
|
|
|
2013-01-29 17:05:16 +08:00
|
|
|
tps65090_pdata->reg_pdata[idx] = rpdata;
|
|
|
|
}
|
|
|
|
return tps65090_pdata;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
|
|
|
|
struct platform_device *pdev,
|
|
|
|
struct of_regulator_match **tps65090_reg_matches)
|
|
|
|
{
|
|
|
|
*tps65090_reg_matches = NULL;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2012-11-20 02:22:22 +08:00
|
|
|
static int tps65090_regulator_probe(struct platform_device *pdev)
|
2012-03-22 21:04:09 +08:00
|
|
|
{
|
2012-04-17 17:08:56 +08:00
|
|
|
struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
|
2012-03-22 21:04:09 +08:00
|
|
|
struct tps65090_regulator *ri = NULL;
|
2012-04-04 07:50:22 +08:00
|
|
|
struct regulator_config config = { };
|
2012-03-22 21:04:09 +08:00
|
|
|
struct regulator_dev *rdev;
|
2012-10-09 17:48:59 +08:00
|
|
|
struct tps65090_regulator_plat_data *tps_pdata;
|
|
|
|
struct tps65090_regulator *pmic;
|
|
|
|
struct tps65090_platform_data *tps65090_pdata;
|
2013-01-29 17:05:16 +08:00
|
|
|
struct of_regulator_match *tps65090_reg_matches = NULL;
|
2012-10-09 17:48:59 +08:00
|
|
|
int num;
|
|
|
|
int ret;
|
2012-03-22 21:04:09 +08:00
|
|
|
|
2012-10-09 17:48:59 +08:00
|
|
|
dev_dbg(&pdev->dev, "Probing regulator\n");
|
2012-03-22 21:04:09 +08:00
|
|
|
|
2012-10-09 17:48:59 +08:00
|
|
|
tps65090_pdata = dev_get_platdata(pdev->dev.parent);
|
2013-01-29 17:05:16 +08:00
|
|
|
if (!tps65090_pdata && tps65090_mfd->dev->of_node)
|
|
|
|
tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
|
|
|
|
&tps65090_reg_matches);
|
|
|
|
if (IS_ERR_OR_NULL(tps65090_pdata)) {
|
2012-10-09 17:48:59 +08:00
|
|
|
dev_err(&pdev->dev, "Platform data missing\n");
|
2013-01-29 17:05:16 +08:00
|
|
|
return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL;
|
2012-03-22 21:04:09 +08:00
|
|
|
}
|
2012-10-09 17:48:59 +08:00
|
|
|
|
treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
devm_kzalloc(handle, a * b, gfp)
with:
devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
devm_kzalloc(handle, a * b * c, gfp)
with:
devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
|
|
|
pmic = devm_kcalloc(&pdev->dev,
|
|
|
|
TPS65090_REGULATOR_MAX, sizeof(*pmic),
|
|
|
|
GFP_KERNEL);
|
2014-02-20 16:53:15 +08:00
|
|
|
if (!pmic)
|
2012-10-09 17:48:59 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2012-10-09 17:49:00 +08:00
|
|
|
for (num = 0; num < TPS65090_REGULATOR_MAX; num++) {
|
2012-10-09 17:48:59 +08:00
|
|
|
tps_pdata = tps65090_pdata->reg_pdata[num];
|
|
|
|
|
|
|
|
ri = &pmic[num];
|
|
|
|
ri->dev = &pdev->dev;
|
|
|
|
ri->desc = &tps65090_regulator_desc[num];
|
2014-05-02 02:50:16 +08:00
|
|
|
if (tps_pdata) {
|
|
|
|
ri->overcurrent_wait_valid =
|
|
|
|
tps_pdata->overcurrent_wait_valid;
|
|
|
|
ri->overcurrent_wait = tps_pdata->overcurrent_wait;
|
|
|
|
}
|
2012-10-09 17:48:59 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* TPS5090 DCDC support the control from external digital input.
|
2012-10-09 17:49:02 +08:00
|
|
|
* Configure it as per platform data.
|
2012-10-09 17:48:59 +08:00
|
|
|
*/
|
|
|
|
if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
|
2012-10-09 17:49:02 +08:00
|
|
|
if (tps_pdata->enable_ext_control) {
|
2018-05-14 16:06:33 +08:00
|
|
|
config.ena_gpiod = tps_pdata->gpiod;
|
2012-10-09 17:49:02 +08:00
|
|
|
ri->desc->ops = &tps65090_ext_control_ops;
|
|
|
|
} else {
|
|
|
|
ret = tps65090_regulator_disable_ext_control(
|
2012-10-09 17:48:59 +08:00
|
|
|
ri, tps_pdata);
|
2012-10-09 17:49:02 +08:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev,
|
2012-10-09 17:48:59 +08:00
|
|
|
"failed disable ext control\n");
|
2013-09-04 19:47:48 +08:00
|
|
|
return ret;
|
2012-10-09 17:49:02 +08:00
|
|
|
}
|
2012-10-09 17:48:59 +08:00
|
|
|
}
|
|
|
|
}
|
2012-10-09 17:49:02 +08:00
|
|
|
|
2013-01-29 17:05:16 +08:00
|
|
|
config.dev = pdev->dev.parent;
|
2012-10-09 17:48:59 +08:00
|
|
|
config.driver_data = ri;
|
|
|
|
config.regmap = tps65090_mfd->rmap;
|
|
|
|
if (tps_pdata)
|
|
|
|
config.init_data = tps_pdata->reg_init_data;
|
|
|
|
else
|
|
|
|
config.init_data = NULL;
|
2013-01-29 17:05:16 +08:00
|
|
|
if (tps65090_reg_matches)
|
|
|
|
config.of_node = tps65090_reg_matches[num].of_node;
|
|
|
|
else
|
|
|
|
config.of_node = NULL;
|
2012-10-09 17:48:59 +08:00
|
|
|
|
2018-12-06 20:43:50 +08:00
|
|
|
/*
|
|
|
|
* Hand the GPIO descriptor management over to the regulator
|
|
|
|
* core, remove it from devres management.
|
|
|
|
*/
|
|
|
|
if (config.ena_gpiod)
|
|
|
|
devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
|
2013-09-04 19:47:48 +08:00
|
|
|
rdev = devm_regulator_register(&pdev->dev, ri->desc, &config);
|
2012-10-09 17:48:59 +08:00
|
|
|
if (IS_ERR(rdev)) {
|
|
|
|
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
|
|
|
ri->desc->name);
|
2013-09-04 19:47:48 +08:00
|
|
|
return PTR_ERR(rdev);
|
2012-10-09 17:48:59 +08:00
|
|
|
}
|
|
|
|
ri->rdev = rdev;
|
2012-10-09 17:49:02 +08:00
|
|
|
|
2014-04-17 07:12:28 +08:00
|
|
|
if (ri->overcurrent_wait_valid) {
|
|
|
|
ret = tps65090_reg_set_overcurrent_wait(ri, rdev);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-10-09 17:49:02 +08:00
|
|
|
/* Enable external control if it is require */
|
|
|
|
if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data &&
|
|
|
|
tps_pdata->enable_ext_control) {
|
|
|
|
ret = tps65090_config_ext_control(ri, true);
|
2013-09-04 19:47:48 +08:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2012-10-09 17:49:02 +08:00
|
|
|
}
|
2012-03-22 21:04:09 +08:00
|
|
|
}
|
|
|
|
|
2012-10-09 17:48:59 +08:00
|
|
|
platform_set_drvdata(pdev, pmic);
|
2012-03-22 21:04:09 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver tps65090_regulator_driver = {
|
|
|
|
.driver = {
|
2012-10-09 17:49:00 +08:00
|
|
|
.name = "tps65090-pmic",
|
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14
Probing of regulators can be a slow operation and can contribute to
slower boot times. This is especially true if a regulator is turned on
at probe time (with regulator-boot-on or regulator-always-on) and the
regulator requires delays (off-on-time, ramp time, etc).
While the overall kernel is not ready to switch to async probe by
default, as per the discussion on the mailing lists [1] it is believed
that the regulator subsystem is in good shape and we can move
regulator drivers over wholesale. There is no way to just magically
opt in all regulators (regulators are just normal drivers like
platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all
regulators found in 'drivers/regulator' individually.
Given the number of drivers touched and the impossibility to test this
ahead of time, it wouldn't be shocking at all if this caused a
regression for someone. If there is a regression caused by this patch,
it's likely to be one of the cases talked about in [1]. As a "quick
fix", drivers involved in the regression could be fixed by changing
them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix
would be to directly fix the problem that caused the issue with async
probe.
The approach here follows a similar approach that was used for the mmc
subsystem several years ago [2]. In fact, I ran nearly the same python
script to auto-generate the changes. The only thing I changed was to
search for "i2c_driver", "spmi_driver", and "spi_driver" in addition
to "platform_driver".
[1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk
[2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-17 03:54:38 +08:00
|
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
2012-03-22 21:04:09 +08:00
|
|
|
},
|
|
|
|
.probe = tps65090_regulator_probe,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init tps65090_regulator_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&tps65090_regulator_driver);
|
|
|
|
}
|
|
|
|
subsys_initcall(tps65090_regulator_init);
|
|
|
|
|
|
|
|
static void __exit tps65090_regulator_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&tps65090_regulator_driver);
|
|
|
|
}
|
|
|
|
module_exit(tps65090_regulator_exit);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("tps65090 regulator driver");
|
|
|
|
MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|
2012-11-23 23:47:16 +08:00
|
|
|
MODULE_ALIAS("platform:tps65090-pmic");
|