OpenCloudOS-Kernel/sound/isa/gus/gus_irq.c

150 lines
4.7 KiB
C
Raw Normal View History

/*
* Routine for IRQ handling from GF1/InterWave chip
* Copyright (c) by Jaroslav Kysela <perex@perex.cz>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <sound/core.h>
#include <sound/info.h>
#include <sound/gus.h>
#ifdef CONFIG_SND_DEBUG
#define STAT_ADD(x) ((x)++)
#else
#define STAT_ADD(x) while (0) { ; }
#endif
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
irqreturn_t snd_gus_interrupt(int irq, void *dev_id)
{
struct snd_gus_card * gus = dev_id;
unsigned char status;
int loop = 100;
int handled = 0;
__again:
status = inb(gus->gf1.reg_irqstat);
if (status == 0)
return IRQ_RETVAL(handled);
handled = 1;
/* snd_printk(KERN_DEBUG "IRQ: status = 0x%x\n", status); */
if (status & 0x02) {
STAT_ADD(gus->gf1.interrupt_stat_midi_in);
[ALSA] fix bootup crash in snd_gus_interrupt() when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 20:42:30 +08:00
if (gus->gf1.interrupt_handler_midi_in)
gus->gf1.interrupt_handler_midi_in(gus);
}
if (status & 0x01) {
STAT_ADD(gus->gf1.interrupt_stat_midi_out);
[ALSA] fix bootup crash in snd_gus_interrupt() when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 20:42:30 +08:00
if (gus->gf1.interrupt_handler_midi_out)
gus->gf1.interrupt_handler_midi_out(gus);
}
if (status & (0x20 | 0x40)) {
unsigned int already, _current_;
unsigned char voice_status, voice;
struct snd_gus_voice *pvoice;
already = 0;
while (((voice_status = snd_gf1_i_read8(gus, SNDRV_GF1_GB_VOICES_IRQ)) & 0xc0) != 0xc0) {
voice = voice_status & 0x1f;
_current_ = 1 << voice;
if (already & _current_)
continue; /* multi request */
already |= _current_; /* mark request */
#if 0
printk(KERN_DEBUG "voice = %i, voice_status = 0x%x, "
"voice_verify = %i\n",
voice, voice_status, inb(GUSP(gus, GF1PAGE)));
#endif
pvoice = &gus->gf1.voices[voice];
if (pvoice->use) {
if (!(voice_status & 0x80)) { /* voice position IRQ */
STAT_ADD(pvoice->interrupt_stat_wave);
pvoice->handler_wave(gus, pvoice);
}
if (!(voice_status & 0x40)) { /* volume ramp IRQ */
STAT_ADD(pvoice->interrupt_stat_volume);
pvoice->handler_volume(gus, pvoice);
}
} else {
STAT_ADD(gus->gf1.interrupt_stat_voice_lost);
snd_gf1_i_ctrl_stop(gus, SNDRV_GF1_VB_ADDRESS_CONTROL);
snd_gf1_i_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
}
}
}
if (status & 0x04) {
STAT_ADD(gus->gf1.interrupt_stat_timer1);
[ALSA] fix bootup crash in snd_gus_interrupt() when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 20:42:30 +08:00
if (gus->gf1.interrupt_handler_timer1)
gus->gf1.interrupt_handler_timer1(gus);
}
if (status & 0x08) {
STAT_ADD(gus->gf1.interrupt_stat_timer2);
[ALSA] fix bootup crash in snd_gus_interrupt() when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 20:42:30 +08:00
if (gus->gf1.interrupt_handler_timer2)
gus->gf1.interrupt_handler_timer2(gus);
}
if (status & 0x80) {
if (snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_DMA_CONTROL) & 0x40) {
STAT_ADD(gus->gf1.interrupt_stat_dma_write);
[ALSA] fix bootup crash in snd_gus_interrupt() when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 20:42:30 +08:00
if (gus->gf1.interrupt_handler_dma_write)
gus->gf1.interrupt_handler_dma_write(gus);
}
if (snd_gf1_i_look8(gus, SNDRV_GF1_GB_REC_DMA_CONTROL) & 0x40) {
STAT_ADD(gus->gf1.interrupt_stat_dma_read);
[ALSA] fix bootup crash in snd_gus_interrupt() when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 20:42:30 +08:00
if (gus->gf1.interrupt_handler_dma_read)
gus->gf1.interrupt_handler_dma_read(gus);
}
}
if (--loop > 0)
goto __again;
return IRQ_NONE;
}
#ifdef CONFIG_SND_DEBUG
static void snd_gus_irq_info_read(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
struct snd_gus_card *gus;
struct snd_gus_voice *pvoice;
int idx;
gus = entry->private_data;
snd_iprintf(buffer, "midi out = %u\n", gus->gf1.interrupt_stat_midi_out);
snd_iprintf(buffer, "midi in = %u\n", gus->gf1.interrupt_stat_midi_in);
snd_iprintf(buffer, "timer1 = %u\n", gus->gf1.interrupt_stat_timer1);
snd_iprintf(buffer, "timer2 = %u\n", gus->gf1.interrupt_stat_timer2);
snd_iprintf(buffer, "dma write = %u\n", gus->gf1.interrupt_stat_dma_write);
snd_iprintf(buffer, "dma read = %u\n", gus->gf1.interrupt_stat_dma_read);
snd_iprintf(buffer, "voice lost = %u\n", gus->gf1.interrupt_stat_voice_lost);
for (idx = 0; idx < 32; idx++) {
pvoice = &gus->gf1.voices[idx];
snd_iprintf(buffer, "voice %i: wave = %u, volume = %u\n",
idx,
pvoice->interrupt_stat_wave,
pvoice->interrupt_stat_volume);
}
}
void snd_gus_irq_profile_init(struct snd_gus_card *gus)
{
struct snd_info_entry *entry;
if (! snd_card_proc_new(gus->card, "gusirq", &entry))
snd_info_set_text_ops(entry, gus, snd_gus_irq_info_read);
}
#endif