OpenCloudOS-Kernel/drivers/rtc/rtc-m41t80.c

1024 lines
26 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* I2C client/driver for the ST M41T80 family of i2c rtc chips.
*
* Author: Alexander Bigga <ab@mycable.de>
*
* Based on m41t00.c by Mark A. Greer <mgreer@mvista.com>
*
* 2006 (c) mycable GmbH
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bcd.h>
#include <linux/clk-provider.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/string.h>
#ifdef CONFIG_RTC_DRV_M41T80_WDT
#include <linux/fs.h>
#include <linux/ioctl.h>
#include <linux/miscdevice.h>
#include <linux/reboot.h>
#include <linux/watchdog.h>
#endif
#define M41T80_REG_SSEC 0x00
#define M41T80_REG_SEC 0x01
#define M41T80_REG_MIN 0x02
#define M41T80_REG_HOUR 0x03
#define M41T80_REG_WDAY 0x04
#define M41T80_REG_DAY 0x05
#define M41T80_REG_MON 0x06
#define M41T80_REG_YEAR 0x07
#define M41T80_REG_ALARM_MON 0x0a
#define M41T80_REG_ALARM_DAY 0x0b
#define M41T80_REG_ALARM_HOUR 0x0c
#define M41T80_REG_ALARM_MIN 0x0d
#define M41T80_REG_ALARM_SEC 0x0e
#define M41T80_REG_FLAGS 0x0f
#define M41T80_REG_SQW 0x13
#define M41T80_DATETIME_REG_SIZE (M41T80_REG_YEAR + 1)
#define M41T80_ALARM_REG_SIZE \
(M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON)
#define M41T80_SQW_MAX_FREQ 32768
#define M41T80_SEC_ST BIT(7) /* ST: Stop Bit */
#define M41T80_ALMON_AFE BIT(7) /* AFE: AF Enable Bit */
#define M41T80_ALMON_SQWE BIT(6) /* SQWE: SQW Enable Bit */
#define M41T80_ALHOUR_HT BIT(6) /* HT: Halt Update Bit */
#define M41T80_FLAGS_OF BIT(2) /* OF: Oscillator Failure Bit */
#define M41T80_FLAGS_AF BIT(6) /* AF: Alarm Flag Bit */
#define M41T80_FLAGS_BATT_LOW BIT(4) /* BL: Battery Low Bit */
#define M41T80_WATCHDOG_RB2 BIT(7) /* RB: Watchdog resolution */
#define M41T80_WATCHDOG_RB1 BIT(1) /* RB: Watchdog resolution */
#define M41T80_WATCHDOG_RB0 BIT(0) /* RB: Watchdog resolution */
#define M41T80_FEATURE_HT BIT(0) /* Halt feature */
#define M41T80_FEATURE_BL BIT(1) /* Battery low indicator */
#define M41T80_FEATURE_SQ BIT(2) /* Squarewave feature */
#define M41T80_FEATURE_WD BIT(3) /* Extra watchdog resolution */
#define M41T80_FEATURE_SQ_ALT BIT(4) /* RSx bits are in reg 4 */
static const struct i2c_device_id m41t80_id[] = {
{ "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
{ "m41t80", M41T80_FEATURE_SQ },
{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
{ "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT },
{ }
};
MODULE_DEVICE_TABLE(i2c, m41t80_id);
static const __maybe_unused struct of_device_id m41t80_of_match[] = {
{
.compatible = "st,m41t62",
.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT)
},
{
.compatible = "st,m41t65",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD)
},
{
.compatible = "st,m41t80",
.data = (void *)(M41T80_FEATURE_SQ)
},
{
.compatible = "st,m41t81",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ)
},
{
.compatible = "st,m41t81s",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
},
{
.compatible = "st,m41t82",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
},
{
.compatible = "st,m41t83",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
},
{
.compatible = "st,m41t84",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
},
{
.compatible = "st,m41t85",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
},
{
.compatible = "st,m41t87",
.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
},
{
.compatible = "microcrystal,rv4162",
.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
},
/* DT compatibility only, do not use compatibles below: */
{
.compatible = "st,rv4162",
.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
},
{
.compatible = "rv4162",
.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
},
{ }
};
MODULE_DEVICE_TABLE(of, m41t80_of_match);
struct m41t80_data {
unsigned long features;
struct i2c_client *client;
struct rtc_device *rtc;
#ifdef CONFIG_COMMON_CLK
struct clk_hw sqw;
unsigned long freq;
unsigned int sqwe;
#endif
};
static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct m41t80_data *m41t80 = i2c_get_clientdata(client);
unsigned long events = 0;
int flags, flags_afe;
rtc_lock(m41t80->rtc);
flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (flags_afe < 0) {
rtc_unlock(m41t80->rtc);
return IRQ_NONE;
}
flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (flags <= 0) {
rtc_unlock(m41t80->rtc);
return IRQ_NONE;
}
if (flags & M41T80_FLAGS_AF) {
flags &= ~M41T80_FLAGS_AF;
flags_afe &= ~M41T80_ALMON_AFE;
events |= RTC_AF;
}
if (events) {
rtc_update_irq(m41t80->rtc, 1, events);
i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags);
i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
flags_afe);
}
rtc_unlock(m41t80->rtc);
return IRQ_HANDLED;
}
static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned char buf[8];
int err, flags;
flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (flags < 0)
return flags;
if (flags & M41T80_FLAGS_OF) {
dev_err(&client->dev, "Oscillator failure, data is invalid.\n");
return -EINVAL;
}
err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC,
sizeof(buf), buf);
if (err < 0) {
dev_err(&client->dev, "Unable to read date\n");
return err;
}
tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f);
tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f);
tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f);
tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f);
tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07;
tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1;
/* assume 20YY not 19YY, and ignore the Century Bit */
tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100;
return 0;
}
static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
unsigned char buf[8];
int err, flags;
buf[M41T80_REG_SSEC] = 0;
buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec);
buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min);
buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour);
buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday);
buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1);
buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100);
buf[M41T80_REG_WDAY] = tm->tm_wday;
/* If the square wave output is controlled in the weekday register */
if (clientdata->features & M41T80_FEATURE_SQ_ALT) {
int val;
val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY);
if (val < 0)
return val;
buf[M41T80_REG_WDAY] |= (val & 0xf0);
}
err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC,
sizeof(buf), buf);
if (err < 0) {
dev_err(&client->dev, "Unable to write to date registers\n");
return err;
}
/* Clear the OF bit of Flags Register */
flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (flags < 0)
return flags;
err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
flags & ~M41T80_FLAGS_OF);
if (err < 0) {
dev_err(&client->dev, "Unable to write flags register\n");
return err;
}
return err;
}
static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq)
{
struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
int reg;
if (clientdata->features & M41T80_FEATURE_BL) {
reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (reg < 0)
return reg;
seq_printf(seq, "battery\t\t: %s\n",
(reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok");
}
return 0;
}
static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
int flags, retval;
flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (flags < 0)
return flags;
if (enabled)
flags |= M41T80_ALMON_AFE;
else
flags &= ~M41T80_ALMON_AFE;
retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
if (retval < 0) {
dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
return retval;
}
return 0;
}
static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct i2c_client *client = to_i2c_client(dev);
u8 alarmvals[5];
int ret, err;
alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1);
alarmvals[1] = bin2bcd(alrm->time.tm_mday);
alarmvals[2] = bin2bcd(alrm->time.tm_hour);
alarmvals[3] = bin2bcd(alrm->time.tm_min);
alarmvals[4] = bin2bcd(alrm->time.tm_sec);
/* Clear AF and AFE flags */
ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (ret < 0)
return ret;
err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
ret & ~(M41T80_ALMON_AFE));
if (err < 0) {
dev_err(dev, "Unable to clear AFE bit\n");
return err;
}
/* Keep SQWE bit value */
alarmvals[0] |= (ret & M41T80_ALMON_SQWE);
ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (ret < 0)
return ret;
err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
ret & ~(M41T80_FLAGS_AF));
if (err < 0) {
dev_err(dev, "Unable to clear AF bit\n");
return err;
}
/* Write the alarm */
err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON,
5, alarmvals);
if (err)
return err;
/* Enable the alarm interrupt */
if (alrm->enabled) {
alarmvals[0] |= M41T80_ALMON_AFE;
err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
alarmvals[0]);
if (err)
return err;
}
return 0;
}
static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct i2c_client *client = to_i2c_client(dev);
u8 alarmvals[5];
int flags, ret;
ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON,
5, alarmvals);
if (ret != 5)
return ret < 0 ? ret : -EIO;
flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (flags < 0)
return flags;
alrm->time.tm_sec = bcd2bin(alarmvals[4] & 0x7f);
alrm->time.tm_min = bcd2bin(alarmvals[3] & 0x7f);
alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
alrm->time.tm_mon = bcd2bin(alarmvals[0] & 0x3f) - 1;
alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
return 0;
}
static const struct rtc_class_ops m41t80_rtc_ops = {
.read_time = m41t80_rtc_read_time,
.set_time = m41t80_rtc_set_time,
.proc = m41t80_rtc_proc,
.read_alarm = m41t80_read_alarm,
.set_alarm = m41t80_set_alarm,
.alarm_irq_enable = m41t80_alarm_irq_enable,
};
#ifdef CONFIG_PM_SLEEP
static int m41t80_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
if (client->irq >= 0 && device_may_wakeup(dev))
enable_irq_wake(client->irq);
return 0;
}
static int m41t80_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
if (client->irq >= 0 && device_may_wakeup(dev))
disable_irq_wake(client->irq);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
#ifdef CONFIG_COMMON_CLK
#define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw)
static unsigned long m41t80_decode_freq(int setting)
{
return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ :
M41T80_SQW_MAX_FREQ >> setting;
}
static unsigned long m41t80_get_freq(struct m41t80_data *m41t80)
{
struct i2c_client *client = m41t80->client;
int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
M41T80_REG_WDAY : M41T80_REG_SQW;
int ret = i2c_smbus_read_byte_data(client, reg_sqw);
if (ret < 0)
return 0;
return m41t80_decode_freq(ret >> 4);
}
static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
return sqw_to_m41t80_data(hw)->freq;
}
static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
if (rate >= M41T80_SQW_MAX_FREQ)
return M41T80_SQW_MAX_FREQ;
if (rate >= M41T80_SQW_MAX_FREQ / 4)
return M41T80_SQW_MAX_FREQ / 4;
if (!rate)
return 0;
return 1 << ilog2(rate);
}
static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
struct i2c_client *client = m41t80->client;
int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
M41T80_REG_WDAY : M41T80_REG_SQW;
int reg, ret, val = 0;
if (rate >= M41T80_SQW_MAX_FREQ)
val = 1;
else if (rate >= M41T80_SQW_MAX_FREQ / 4)
val = 2;
else if (rate)
val = 15 - ilog2(rate);
reg = i2c_smbus_read_byte_data(client, reg_sqw);
if (reg < 0)
return reg;
reg = (reg & 0x0f) | (val << 4);
ret = i2c_smbus_write_byte_data(client, reg_sqw, reg);
if (!ret)
m41t80->freq = m41t80_decode_freq(val);
return ret;
}
static int m41t80_sqw_control(struct clk_hw *hw, bool enable)
{
struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
struct i2c_client *client = m41t80->client;
int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (ret < 0)
return ret;
if (enable)
ret |= M41T80_ALMON_SQWE;
else
ret &= ~M41T80_ALMON_SQWE;
ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret);
if (!ret)
m41t80->sqwe = enable;
return ret;
}
static int m41t80_sqw_prepare(struct clk_hw *hw)
{
return m41t80_sqw_control(hw, 1);
}
static void m41t80_sqw_unprepare(struct clk_hw *hw)
{
m41t80_sqw_control(hw, 0);
}
static int m41t80_sqw_is_prepared(struct clk_hw *hw)
{
return sqw_to_m41t80_data(hw)->sqwe;
}
static const struct clk_ops m41t80_sqw_ops = {
.prepare = m41t80_sqw_prepare,
.unprepare = m41t80_sqw_unprepare,
.is_prepared = m41t80_sqw_is_prepared,
.recalc_rate = m41t80_sqw_recalc_rate,
.round_rate = m41t80_sqw_round_rate,
.set_rate = m41t80_sqw_set_rate,
};
static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
{
struct i2c_client *client = m41t80->client;
struct device_node *node = client->dev.of_node;
rtc: m41t80: add support for fixed clock Congatec's QMX6 system on module (SoM) uses a m41t62 as RTC. The modules SQW clock output defaults to 32768 Hz. This behaviour is used to provide the i.MX6 CKIL clock. Once the RTC driver is probed, the clock is disabled and all i.MX6 functionality depending on the 32 KHz clock has undefined behaviour. For example when using the hardware watchdog the system will likely do arbitrary reboots. Referencing the m41t62 directly results in a deadlock. The kernel will see, that i.MX6 system clock needs the RTC clock and do probe deferral. But the i.MX6 I2C module never becomes usable without the i.MX6 CKIL clock and thus the RTC's clock will not be probed. So from the kernel's perspective this is a chicken-and-egg problem. Technically everything is fine by not touching anything, since the RTC clock correctly enables the clock on reset (i.e. on battery backup power loss) and also the bootloader enables it in case an something (e.g. an unpatched kernel) disabled this incorrectly. A workaround for this issue is describing the square wave pin as fixed-clock, which is registered early and basically how this pin is used on the i.MX6. Suggested-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210428222953.235280-2-sebastian.reichel@collabora.com
2021-04-29 06:29:49 +08:00
struct device_node *fixed_clock;
struct clk *clk;
struct clk_init_data init;
int ret;
rtc: m41t80: add support for fixed clock Congatec's QMX6 system on module (SoM) uses a m41t62 as RTC. The modules SQW clock output defaults to 32768 Hz. This behaviour is used to provide the i.MX6 CKIL clock. Once the RTC driver is probed, the clock is disabled and all i.MX6 functionality depending on the 32 KHz clock has undefined behaviour. For example when using the hardware watchdog the system will likely do arbitrary reboots. Referencing the m41t62 directly results in a deadlock. The kernel will see, that i.MX6 system clock needs the RTC clock and do probe deferral. But the i.MX6 I2C module never becomes usable without the i.MX6 CKIL clock and thus the RTC's clock will not be probed. So from the kernel's perspective this is a chicken-and-egg problem. Technically everything is fine by not touching anything, since the RTC clock correctly enables the clock on reset (i.e. on battery backup power loss) and also the bootloader enables it in case an something (e.g. an unpatched kernel) disabled this incorrectly. A workaround for this issue is describing the square wave pin as fixed-clock, which is registered early and basically how this pin is used on the i.MX6. Suggested-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210428222953.235280-2-sebastian.reichel@collabora.com
2021-04-29 06:29:49 +08:00
fixed_clock = of_get_child_by_name(node, "clock");
if (fixed_clock) {
/*
* skip registering square wave clock when a fixed
* clock has been registered. The fixed clock is
* registered automatically when being referenced.
*/
of_node_put(fixed_clock);
return 0;
}
/* First disable the clock */
ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (ret < 0)
return ERR_PTR(ret);
ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
ret & ~(M41T80_ALMON_SQWE));
if (ret < 0)
return ERR_PTR(ret);
init.name = "m41t80-sqw";
init.ops = &m41t80_sqw_ops;
init.flags = 0;
init.parent_names = NULL;
init.num_parents = 0;
m41t80->sqw.init = &init;
m41t80->freq = m41t80_get_freq(m41t80);
/* optional override of the clockname */
of_property_read_string(node, "clock-output-names", &init.name);
/* register the clock */
clk = clk_register(&client->dev, &m41t80->sqw);
if (!IS_ERR(clk))
of_clk_add_provider(node, of_clk_src_simple_get, clk);
return clk;
}
#endif
#ifdef CONFIG_RTC_DRV_M41T80_WDT
/*
*****************************************************************************
*
* Watchdog Driver
*
*****************************************************************************
*/
static DEFINE_MUTEX(m41t80_rtc_mutex);
static struct i2c_client *save_client;
/* Default margin */
#define WD_TIMO 60 /* 1..31 seconds */
static int wdt_margin = WD_TIMO;
module_param(wdt_margin, int, 0);
MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)");
static unsigned long wdt_is_open;
static int boot_flag;
/**
* wdt_ping - Reload counter one with the watchdog timeout.
* We don't bother reloading the cascade counter.
*/
static void wdt_ping(void)
{
unsigned char i2c_data[2];
struct i2c_msg msgs1[1] = {
{
.addr = save_client->addr,
.flags = 0,
.len = 2,
.buf = i2c_data,
},
};
struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
i2c_data[0] = 0x09; /* watchdog register */
if (wdt_margin > 31)
i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */
else
/*
* WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02)
*/
i2c_data[1] = wdt_margin << 2 | 0x82;
/*
* M41T65 has three bits for watchdog resolution. Don't set bit 7, as
* that would be an invalid resolution.
*/
if (clientdata->features & M41T80_FEATURE_WD)
i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
i2c_transfer(save_client->adapter, msgs1, 1);
}
/**
* wdt_disable - disables watchdog.
*/
static void wdt_disable(void)
{
unsigned char i2c_data[2], i2c_buf[0x10];
struct i2c_msg msgs0[2] = {
{
.addr = save_client->addr,
.flags = 0,
.len = 1,
.buf = i2c_data,
},
{
.addr = save_client->addr,
.flags = I2C_M_RD,
.len = 1,
.buf = i2c_buf,
},
};
struct i2c_msg msgs1[1] = {
{
.addr = save_client->addr,
.flags = 0,
.len = 2,
.buf = i2c_data,
},
};
i2c_data[0] = 0x09;
i2c_transfer(save_client->adapter, msgs0, 2);
i2c_data[0] = 0x09;
i2c_data[1] = 0x00;
i2c_transfer(save_client->adapter, msgs1, 1);
}
/**
* wdt_write - write to watchdog.
* @file: file handle to the watchdog
* @buf: buffer to write (unused as data does not matter here
* @count: count of bytes
* @ppos: pointer to the position to write. No seeks allowed
*
* A write to a watchdog device is defined as a keepalive signal. Any
* write of data will do, as we we don't define content meaning.
*/
static ssize_t wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if (count) {
wdt_ping();
return 1;
}
return 0;
}
static ssize_t wdt_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
return 0;
}
/**
* wdt_ioctl - ioctl handler to set watchdog.
* @file: file handle to the device
* @cmd: watchdog command
* @arg: argument pointer
*
* The watchdog API defines a common set of functions for all watchdogs
* according to their available features. We only actually usefully support
* querying capabilities and current status.
*/
static int wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int new_margin, rv;
static struct watchdog_info ident = {
.options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT,
.firmware_version = 1,
.identity = "M41T80 WTD"
};
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user((struct watchdog_info __user *)arg, &ident,
sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(boot_flag, (int __user *)arg);
case WDIOC_KEEPALIVE:
wdt_ping();
return 0;
case WDIOC_SETTIMEOUT:
if (get_user(new_margin, (int __user *)arg))
return -EFAULT;
/* Arbitrary, can't find the card's limits */
if (new_margin < 1 || new_margin > 124)
return -EINVAL;
wdt_margin = new_margin;
wdt_ping();
fallthrough;
case WDIOC_GETTIMEOUT:
return put_user(wdt_margin, (int __user *)arg);
case WDIOC_SETOPTIONS:
if (copy_from_user(&rv, (int __user *)arg, sizeof(int)))
return -EFAULT;
if (rv & WDIOS_DISABLECARD) {
pr_info("disable watchdog\n");
wdt_disable();
}
if (rv & WDIOS_ENABLECARD) {
pr_info("enable watchdog\n");
wdt_ping();
}
return -EINVAL;
}
return -ENOTTY;
}
static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int ret;
mutex_lock(&m41t80_rtc_mutex);
ret = wdt_ioctl(file, cmd, arg);
mutex_unlock(&m41t80_rtc_mutex);
return ret;
}
/**
* wdt_open - open a watchdog.
* @inode: inode of device
* @file: file handle to device
*
*/
static int wdt_open(struct inode *inode, struct file *file)
{
if (iminor(inode) == WATCHDOG_MINOR) {
mutex_lock(&m41t80_rtc_mutex);
if (test_and_set_bit(0, &wdt_is_open)) {
mutex_unlock(&m41t80_rtc_mutex);
return -EBUSY;
}
/*
* Activate
*/
wdt_is_open = 1;
mutex_unlock(&m41t80_rtc_mutex);
*: convert stream-like files from nonseekable_open -> stream_open Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-03-27 04:51:19 +08:00
return stream_open(inode, file);
}
return -ENODEV;
}
/**
* wdt_release - release a watchdog.
* @inode: inode to board
* @file: file handle to board
*
*/
static int wdt_release(struct inode *inode, struct file *file)
{
if (iminor(inode) == WATCHDOG_MINOR)
clear_bit(0, &wdt_is_open);
return 0;
}
/**
* wdt_notify_sys - notify to watchdog.
* @this: our notifier block
* @code: the event being reported
* @unused: unused
*
* Our notifier is called on system shutdowns. We want to turn the card
* off at reboot otherwise the machine will reboot again during memory
* test or worse yet during the following fsck. This would suck, in fact
* trust me - if it happens it does suck.
*/
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
/* Disable Watchdog */
wdt_disable();
return NOTIFY_DONE;
}
static const struct file_operations wdt_fops = {
.owner = THIS_MODULE,
.read = wdt_read,
.unlocked_ioctl = wdt_unlocked_ioctl,
.compat_ioctl = compat_ptr_ioctl,
.write = wdt_write,
.open = wdt_open,
.release = wdt_release,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = no_llseek,
};
static struct miscdevice wdt_dev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &wdt_fops,
};
/*
* The WDT card needs to learn about soft shutdowns in order to
* turn the timebomb registers off.
*/
static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
#endif /* CONFIG_RTC_DRV_M41T80_WDT */
/*
*****************************************************************************
*
* Driver Interface
*
*****************************************************************************
*/
static int m41t80_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
int rc = 0;
struct rtc_time tm;
struct m41t80_data *m41t80_data = NULL;
bool wakeup_source = false;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n");
return -ENODEV;
}
m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data),
GFP_KERNEL);
if (!m41t80_data)
return -ENOMEM;
m41t80_data->client = client;
if (client->dev.of_node)
m41t80_data->features = (unsigned long)
of_device_get_match_data(&client->dev);
else
m41t80_data->features = id->driver_data;
i2c_set_clientdata(client, m41t80_data);
rtc: m41t80: fix race conditions The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler, leading to: Unable to handle kernel NULL pointer dereference at virtual address 0000017c pgd = a38a2f9b [0000017c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ #42 Hardware name: Atmel SAMA5 PC is at mutex_lock+0x14/0x38 LR is at m41t80_handle_irq+0x1c/0x9c pc : [<c06e864c>] lr : [<c04b70f0>] psr: 20000013 sp : dec73f30 ip : 00000000 fp : dec56d98 r10: df437cf0 r9 : c0a03008 r8 : c0145ffc r7 : df5c4300 r6 : dec568d0 r5 : df593000 r4 : 0000017c r3 : df592800 r2 : 60000013 r1 : df593000 r0 : 0000017c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 20004059 DAC: 00000051 Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e) Stack: (0xdec73f30 to 0xdec74000) 3f20: dec56840 df5c4300 00000001 df5c4300 3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000 3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840 3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a [<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c) [<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54) [<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0) [<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148) [<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xdec73fb0 to 0xdec73ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f) ---[ end trace 22b027302eb7c604 ]--- genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48) Also, there is another possible race condition. The probe function is not allowed to fail after the RTC is registered because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ and register it as late as possible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-26 04:14:31 +08:00
m41t80_data->rtc = devm_rtc_allocate_device(&client->dev);
if (IS_ERR(m41t80_data->rtc))
return PTR_ERR(m41t80_data->rtc);
#ifdef CONFIG_OF
wakeup_source = of_property_read_bool(client->dev.of_node,
"wakeup-source");
#endif
if (client->irq > 0) {
rc = devm_request_threaded_irq(&client->dev, client->irq,
NULL, m41t80_handle_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"m41t80", client);
if (rc) {
dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
client->irq = 0;
wakeup_source = false;
}
}
if (client->irq > 0 || wakeup_source)
device_init_wakeup(&client->dev, true);
else
clear_bit(RTC_FEATURE_ALARM, m41t80_data->rtc->features);
rtc: m41t80: fix race conditions The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler, leading to: Unable to handle kernel NULL pointer dereference at virtual address 0000017c pgd = a38a2f9b [0000017c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ #42 Hardware name: Atmel SAMA5 PC is at mutex_lock+0x14/0x38 LR is at m41t80_handle_irq+0x1c/0x9c pc : [<c06e864c>] lr : [<c04b70f0>] psr: 20000013 sp : dec73f30 ip : 00000000 fp : dec56d98 r10: df437cf0 r9 : c0a03008 r8 : c0145ffc r7 : df5c4300 r6 : dec568d0 r5 : df593000 r4 : 0000017c r3 : df592800 r2 : 60000013 r1 : df593000 r0 : 0000017c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 20004059 DAC: 00000051 Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e) Stack: (0xdec73f30 to 0xdec74000) 3f20: dec56840 df5c4300 00000001 df5c4300 3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000 3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840 3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a [<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c) [<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54) [<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0) [<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148) [<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xdec73fb0 to 0xdec73ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f) ---[ end trace 22b027302eb7c604 ]--- genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48) Also, there is another possible race condition. The probe function is not allowed to fail after the RTC is registered because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ and register it as late as possible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-26 04:14:31 +08:00
m41t80_data->rtc->ops = &m41t80_rtc_ops;
m41t80_data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
m41t80_data->rtc->range_max = RTC_TIMESTAMP_END_2099;
if (client->irq <= 0) {
/* We cannot support UIE mode if we do not have an IRQ line */
rtc: m41t80: fix race conditions The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler, leading to: Unable to handle kernel NULL pointer dereference at virtual address 0000017c pgd = a38a2f9b [0000017c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ #42 Hardware name: Atmel SAMA5 PC is at mutex_lock+0x14/0x38 LR is at m41t80_handle_irq+0x1c/0x9c pc : [<c06e864c>] lr : [<c04b70f0>] psr: 20000013 sp : dec73f30 ip : 00000000 fp : dec56d98 r10: df437cf0 r9 : c0a03008 r8 : c0145ffc r7 : df5c4300 r6 : dec568d0 r5 : df593000 r4 : 0000017c r3 : df592800 r2 : 60000013 r1 : df593000 r0 : 0000017c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 20004059 DAC: 00000051 Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e) Stack: (0xdec73f30 to 0xdec74000) 3f20: dec56840 df5c4300 00000001 df5c4300 3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000 3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840 3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a [<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c) [<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54) [<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0) [<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148) [<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xdec73fb0 to 0xdec73ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f) ---[ end trace 22b027302eb7c604 ]--- genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48) Also, there is another possible race condition. The probe function is not allowed to fail after the RTC is registered because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ and register it as late as possible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-26 04:14:31 +08:00
m41t80_data->rtc->uie_unsupported = 1;
}
/* Make sure HT (Halt Update) bit is cleared */
rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
if (rc >= 0 && rc & M41T80_ALHOUR_HT) {
if (m41t80_data->features & M41T80_FEATURE_HT) {
m41t80_rtc_read_time(&client->dev, &tm);
dev_info(&client->dev, "HT bit was set!\n");
dev_info(&client->dev, "Power Down at %ptR\n", &tm);
}
rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
rc & ~M41T80_ALHOUR_HT);
}
if (rc < 0) {
dev_err(&client->dev, "Can't clear HT bit\n");
return rc;
}
/* Make sure ST (stop) bit is cleared */
rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC);
if (rc >= 0 && rc & M41T80_SEC_ST)
rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
rc & ~M41T80_SEC_ST);
if (rc < 0) {
dev_err(&client->dev, "Can't clear ST bit\n");
return rc;
}
#ifdef CONFIG_RTC_DRV_M41T80_WDT
if (m41t80_data->features & M41T80_FEATURE_HT) {
save_client = client;
rc = misc_register(&wdt_dev);
if (rc)
return rc;
rc = register_reboot_notifier(&wdt_notifier);
if (rc) {
misc_deregister(&wdt_dev);
return rc;
}
}
#endif
#ifdef CONFIG_COMMON_CLK
if (m41t80_data->features & M41T80_FEATURE_SQ)
m41t80_sqw_register_clk(m41t80_data);
#endif
rtc: m41t80: fix race conditions The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler, leading to: Unable to handle kernel NULL pointer dereference at virtual address 0000017c pgd = a38a2f9b [0000017c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ #42 Hardware name: Atmel SAMA5 PC is at mutex_lock+0x14/0x38 LR is at m41t80_handle_irq+0x1c/0x9c pc : [<c06e864c>] lr : [<c04b70f0>] psr: 20000013 sp : dec73f30 ip : 00000000 fp : dec56d98 r10: df437cf0 r9 : c0a03008 r8 : c0145ffc r7 : df5c4300 r6 : dec568d0 r5 : df593000 r4 : 0000017c r3 : df592800 r2 : 60000013 r1 : df593000 r0 : 0000017c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 20004059 DAC: 00000051 Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e) Stack: (0xdec73f30 to 0xdec74000) 3f20: dec56840 df5c4300 00000001 df5c4300 3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000 3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840 3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a [<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c) [<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54) [<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0) [<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148) [<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xdec73fb0 to 0xdec73ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f) ---[ end trace 22b027302eb7c604 ]--- genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48) Also, there is another possible race condition. The probe function is not allowed to fail after the RTC is registered because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ and register it as late as possible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-26 04:14:31 +08:00
rc = devm_rtc_register_device(m41t80_data->rtc);
rtc: m41t80: fix race conditions The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler, leading to: Unable to handle kernel NULL pointer dereference at virtual address 0000017c pgd = a38a2f9b [0000017c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ #42 Hardware name: Atmel SAMA5 PC is at mutex_lock+0x14/0x38 LR is at m41t80_handle_irq+0x1c/0x9c pc : [<c06e864c>] lr : [<c04b70f0>] psr: 20000013 sp : dec73f30 ip : 00000000 fp : dec56d98 r10: df437cf0 r9 : c0a03008 r8 : c0145ffc r7 : df5c4300 r6 : dec568d0 r5 : df593000 r4 : 0000017c r3 : df592800 r2 : 60000013 r1 : df593000 r0 : 0000017c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 20004059 DAC: 00000051 Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e) Stack: (0xdec73f30 to 0xdec74000) 3f20: dec56840 df5c4300 00000001 df5c4300 3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000 3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840 3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a [<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c) [<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54) [<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0) [<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148) [<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xdec73fb0 to 0xdec73ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f) ---[ end trace 22b027302eb7c604 ]--- genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48) Also, there is another possible race condition. The probe function is not allowed to fail after the RTC is registered because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ and register it as late as possible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-26 04:14:31 +08:00
if (rc)
return rc;
return 0;
}
static int m41t80_remove(struct i2c_client *client)
{
#ifdef CONFIG_RTC_DRV_M41T80_WDT
struct m41t80_data *clientdata = i2c_get_clientdata(client);
if (clientdata->features & M41T80_FEATURE_HT) {
misc_deregister(&wdt_dev);
unregister_reboot_notifier(&wdt_notifier);
}
#endif
return 0;
}
static struct i2c_driver m41t80_driver = {
.driver = {
.name = "rtc-m41t80",
.of_match_table = of_match_ptr(m41t80_of_match),
.pm = &m41t80_pm,
},
.probe = m41t80_probe,
.remove = m41t80_remove,
.id_table = m41t80_id,
};
module_i2c_driver(m41t80_driver);
MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>");
MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver");
MODULE_LICENSE("GPL");