OpenCloudOS-Kernel/arch/arc/include/asm/ptrace.h

160 lines
3.9 KiB
C
Raw Normal View History

/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
*/
#ifndef __ASM_ARC_PTRACE_H
#define __ASM_ARC_PTRACE_H
#include <uapi/asm/ptrace.h>
#ifndef __ASSEMBLY__
/* THE pt_regs: Defines how regs are saved during entry into kernel */
#ifdef CONFIG_ISA_ARCOMPACT
struct pt_regs {
#ifdef CONFIG_ARC_PLAT_EZNPS
unsigned long eflags; /* Extended FLAGS */
unsigned long gpa1; /* General Purpose Aux */
#endif
/* Real registers */
unsigned long bta; /* bta_l1, bta_l2, erbta */
unsigned long lp_start, lp_end, lp_count;
unsigned long status32; /* status32_l1, status32_l2, erstatus */
unsigned long ret; /* ilink1, ilink2 or eret */
unsigned long blink;
unsigned long fp;
unsigned long r26; /* gp */
unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
unsigned long sp; /* User/Kernel depending on where we came from */
unsigned long orig_r0;
/*
* To distinguish bet excp, syscall, irq
* For traps and exceptions, Exception Cause Register.
* ECR: <00> <VV> <CC> <PP>
* Last word used by Linux for extra state mgmt (syscall-restart)
* For interrupts, use artificial ECR values to note current prio-level
*/
union {
struct {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned long state:8, ecr_vec:8,
ecr_cause:8, ecr_param:8;
#else
unsigned long ecr_param:8, ecr_cause:8,
ecr_vec:8, state:8;
#endif
};
unsigned long event;
};
ARC: pt_regs update #4: r25 saved/restored unconditionally (This is a VERY IMP change for low level interrupt/exception handling) ----------------------------------------------------------------------- WHAT ----------------------------------------------------------------------- * User 25 now saved in pt_regs->user_r25 (vs. tsk->thread_info.user_r25) * This allows Low level interrupt code to unconditionally save r25 (vs. the prev version which would only do it for U->K transition). Ofcourse for nested interrupts, only the pt_regs->user_r25 of bottom-most frame is useful. * simplifies the interrupt prologue/epilogue * Needed for ARCv2 ISA code and done here to keep design similar with ARCompact event handling ----------------------------------------------------------------------- WHY ------------------------------------------------------------------------- With CONFIG_ARC_CURR_IN_REG, r25 is used to cache "current" task pointer in kernel mode. So when entering kernel mode from User Mode - user r25 is specially safe-kept (it being a callee reg is NOT part of pt_regs which are saved by default on each interrupt/trap/exception) - r25 loaded with current task pointer. Further, if interrupt was taken in kernel mode, this is skipped since we know that r25 already has valid "current" pointer. With 2 level of interrupts in ARCompact ISA, detecting this is difficult but still possible, since we could be in kernel mode but r25 not already saved (in fact the stack itself might not have been switched). A. User mode B. L1 IRQ taken C. L2 IRQ taken (while on 1st line of L1 ISR) So in #C, although in kernel mode, r25 not saved (infact SP not switched at all) Given that ARcompact has manual stack switching, we could use a bit of trickey - The low level code would make sure that SP is only set to kernel mode value at the very end (after saving r25). So a non kernel mode SP, even if in kernel mode, meant r25 was NOT saved. The same paradigm won't work in ARCv2 ISA since SP is auto-switched so it's setting can't be delayed/constrained. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-28 16:20:41 +08:00
unsigned long user_r25;
};
#else
struct pt_regs {
unsigned long orig_r0;
union {
struct {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned long state:8, ecr_vec:8,
ecr_cause:8, ecr_param:8;
#else
unsigned long ecr_param:8, ecr_cause:8,
ecr_vec:8, state:8;
#endif
};
unsigned long event;
};
unsigned long bta; /* bta_l1, bta_l2, erbta */
unsigned long user_r25;
unsigned long r26; /* gp */
unsigned long fp;
unsigned long sp; /* user/kernel sp depending on where we came from */
unsigned long r12, r30;
#ifdef CONFIG_ARC_HAS_ACCL_REGS
unsigned long r58, r59; /* ACCL/ACCH used by FPU / DSP MPY */
#endif
/*------- Below list auto saved by h/w -----------*/
unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
unsigned long blink;
unsigned long lp_end, lp_start, lp_count;
unsigned long ei, ldi, jli;
unsigned long ret;
unsigned long status32;
};
#endif
/* Callee saved registers - need to be saved only when you are scheduled out */
struct callee_regs {
unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
};
#define instruction_pointer(regs) ((regs)->ret)
#define profile_pc(regs) instruction_pointer(regs)
/* return 1 if user mode or 0 if kernel mode */
#define user_mode(regs) (regs->status32 & STATUS_U_MASK)
#define user_stack_pointer(regs)\
({ unsigned int sp; \
if (user_mode(regs)) \
sp = (regs)->sp;\
else \
sp = -1; \
sp; \
})
/* return 1 if PC in delay slot */
#define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK)
#define in_syscall(regs) ((regs->ecr_vec == ECR_V_TRAP) && !regs->ecr_param)
#define in_brkpt_trap(regs) ((regs->ecr_vec == ECR_V_TRAP) && regs->ecr_param)
#define STATE_SCALL_RESTARTED 0x01
#define syscall_wont_restart(reg) (reg->state |= STATE_SCALL_RESTARTED)
#define syscall_restartable(reg) !(reg->state & STATE_SCALL_RESTARTED)
#define current_pt_regs() \
({ \
/* open-coded current_thread_info() */ \
register unsigned long sp asm ("sp"); \
unsigned long pg_start = (sp & ~(THREAD_SIZE - 1)); \
(struct pt_regs *)(pg_start + THREAD_SIZE) - 1; \
})
static inline long regs_return_value(struct pt_regs *regs)
{
return (long)regs->r0;
}
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_PTRACE_H */