OpenCloudOS-Kernel/drivers/net/ethernet/mellanox/mlx4/cmd.c

2370 lines
61 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
* Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/sched.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/device.h>
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
#include <linux/semaphore.h>
#include <rdma/ib_smi.h>
#include <asm/io.h>
#include "mlx4.h"
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
#include "fw.h"
#define CMD_POLL_TOKEN 0xffff
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
#define INBOX_MASK 0xffffffffffffff00ULL
#define CMD_CHAN_VER 1
#define CMD_CHAN_IF_REV 1
enum {
/* command completed successfully: */
CMD_STAT_OK = 0x00,
/* Internal error (such as a bus error) occurred while processing command: */
CMD_STAT_INTERNAL_ERR = 0x01,
/* Operation/command not supported or opcode modifier not supported: */
CMD_STAT_BAD_OP = 0x02,
/* Parameter not supported or parameter out of range: */
CMD_STAT_BAD_PARAM = 0x03,
/* System not enabled or bad system state: */
CMD_STAT_BAD_SYS_STATE = 0x04,
/* Attempt to access reserved or unallocaterd resource: */
CMD_STAT_BAD_RESOURCE = 0x05,
/* Requested resource is currently executing a command, or is otherwise busy: */
CMD_STAT_RESOURCE_BUSY = 0x06,
/* Required capability exceeds device limits: */
CMD_STAT_EXCEED_LIM = 0x08,
/* Resource is not in the appropriate state or ownership: */
CMD_STAT_BAD_RES_STATE = 0x09,
/* Index out of range: */
CMD_STAT_BAD_INDEX = 0x0a,
/* FW image corrupted: */
CMD_STAT_BAD_NVMEM = 0x0b,
/* Error in ICM mapping (e.g. not enough auxiliary ICM pages to execute command): */
CMD_STAT_ICM_ERROR = 0x0c,
/* Attempt to modify a QP/EE which is not in the presumed state: */
CMD_STAT_BAD_QP_STATE = 0x10,
/* Bad segment parameters (Address/Size): */
CMD_STAT_BAD_SEG_PARAM = 0x20,
/* Memory Region has Memory Windows bound to: */
CMD_STAT_REG_BOUND = 0x21,
/* HCA local attached memory not present: */
CMD_STAT_LAM_NOT_PRE = 0x22,
/* Bad management packet (silently discarded): */
CMD_STAT_BAD_PKT = 0x30,
/* More outstanding CQEs in CQ than new CQ size: */
CMD_STAT_BAD_SIZE = 0x40,
/* Multi Function device support required: */
CMD_STAT_MULTI_FUNC_REQ = 0x50,
};
enum {
HCR_IN_PARAM_OFFSET = 0x00,
HCR_IN_MODIFIER_OFFSET = 0x08,
HCR_OUT_PARAM_OFFSET = 0x0c,
HCR_TOKEN_OFFSET = 0x14,
HCR_STATUS_OFFSET = 0x18,
HCR_OPMOD_SHIFT = 12,
HCR_T_BIT = 21,
HCR_E_BIT = 22,
HCR_GO_BIT = 23
};
enum {
GO_BIT_TIMEOUT_MSECS = 10000
};
enum mlx4_vlan_transition {
MLX4_VLAN_TRANSITION_VST_VST = 0,
MLX4_VLAN_TRANSITION_VST_VGT = 1,
MLX4_VLAN_TRANSITION_VGT_VST = 2,
MLX4_VLAN_TRANSITION_VGT_VGT = 3,
};
struct mlx4_cmd_context {
struct completion done;
int result;
int next;
u64 out_param;
u16 token;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
u8 fw_status;
};
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
static int mlx4_master_process_vhcr(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr_cmd *in_vhcr);
static int mlx4_status_to_errno(u8 status)
{
static const int trans_table[] = {
[CMD_STAT_INTERNAL_ERR] = -EIO,
[CMD_STAT_BAD_OP] = -EPERM,
[CMD_STAT_BAD_PARAM] = -EINVAL,
[CMD_STAT_BAD_SYS_STATE] = -ENXIO,
[CMD_STAT_BAD_RESOURCE] = -EBADF,
[CMD_STAT_RESOURCE_BUSY] = -EBUSY,
[CMD_STAT_EXCEED_LIM] = -ENOMEM,
[CMD_STAT_BAD_RES_STATE] = -EBADF,
[CMD_STAT_BAD_INDEX] = -EBADF,
[CMD_STAT_BAD_NVMEM] = -EFAULT,
[CMD_STAT_ICM_ERROR] = -ENFILE,
[CMD_STAT_BAD_QP_STATE] = -EINVAL,
[CMD_STAT_BAD_SEG_PARAM] = -EFAULT,
[CMD_STAT_REG_BOUND] = -EBUSY,
[CMD_STAT_LAM_NOT_PRE] = -EAGAIN,
[CMD_STAT_BAD_PKT] = -EINVAL,
[CMD_STAT_BAD_SIZE] = -ENOMEM,
[CMD_STAT_MULTI_FUNC_REQ] = -EACCES,
};
if (status >= ARRAY_SIZE(trans_table) ||
(status != CMD_STAT_OK && trans_table[status] == 0))
return -EIO;
return trans_table[status];
}
static u8 mlx4_errno_to_status(int errno)
{
switch (errno) {
case -EPERM:
return CMD_STAT_BAD_OP;
case -EINVAL:
return CMD_STAT_BAD_PARAM;
case -ENXIO:
return CMD_STAT_BAD_SYS_STATE;
case -EBUSY:
return CMD_STAT_RESOURCE_BUSY;
case -ENOMEM:
return CMD_STAT_EXCEED_LIM;
case -ENFILE:
return CMD_STAT_ICM_ERROR;
default:
return CMD_STAT_INTERNAL_ERR;
}
}
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
static int comm_pending(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
u32 status = readl(&priv->mfunc.comm->slave_read);
return (swab32(status) >> 31) != priv->cmd.comm_toggle;
}
static void mlx4_comm_cmd_post(struct mlx4_dev *dev, u8 cmd, u16 param)
{
struct mlx4_priv *priv = mlx4_priv(dev);
u32 val;
priv->cmd.comm_toggle ^= 1;
val = param | (cmd << 16) | (priv->cmd.comm_toggle << 31);
__raw_writel((__force u32) cpu_to_be32(val),
&priv->mfunc.comm->slave_write);
mmiowb();
}
static int mlx4_comm_cmd_poll(struct mlx4_dev *dev, u8 cmd, u16 param,
unsigned long timeout)
{
struct mlx4_priv *priv = mlx4_priv(dev);
unsigned long end;
int err = 0;
int ret_from_pending = 0;
/* First, verify that the master reports correct status */
if (comm_pending(dev)) {
mlx4_warn(dev, "Communication channel is not idle."
"my toggle is %d (cmd:0x%x)\n",
priv->cmd.comm_toggle, cmd);
return -EAGAIN;
}
/* Write command */
down(&priv->cmd.poll_sem);
mlx4_comm_cmd_post(dev, cmd, param);
end = msecs_to_jiffies(timeout) + jiffies;
while (comm_pending(dev) && time_before(jiffies, end))
cond_resched();
ret_from_pending = comm_pending(dev);
if (ret_from_pending) {
/* check if the slave is trying to boot in the middle of
* FLR process. The only non-zero result in the RESET command
* is MLX4_DELAY_RESET_SLAVE*/
if ((MLX4_COMM_CMD_RESET == cmd)) {
err = MLX4_DELAY_RESET_SLAVE;
} else {
mlx4_warn(dev, "Communication channel timed out\n");
err = -ETIMEDOUT;
}
}
up(&priv->cmd.poll_sem);
return err;
}
static int mlx4_comm_cmd_wait(struct mlx4_dev *dev, u8 op,
u16 param, unsigned long timeout)
{
struct mlx4_cmd *cmd = &mlx4_priv(dev)->cmd;
struct mlx4_cmd_context *context;
unsigned long end;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
int err = 0;
down(&cmd->event_sem);
spin_lock(&cmd->context_lock);
BUG_ON(cmd->free_head < 0);
context = &cmd->context[cmd->free_head];
context->token += cmd->token_mask + 1;
cmd->free_head = context->next;
spin_unlock(&cmd->context_lock);
init_completion(&context->done);
mlx4_comm_cmd_post(dev, op, param);
if (!wait_for_completion_timeout(&context->done,
msecs_to_jiffies(timeout))) {
mlx4_warn(dev, "communication channel command 0x%x timed out\n",
op);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
err = -EBUSY;
goto out;
}
err = context->result;
if (err && context->fw_status != CMD_STAT_MULTI_FUNC_REQ) {
mlx4_err(dev, "command 0x%x failed: fw status = 0x%x\n",
op, context->fw_status);
goto out;
}
out:
/* wait for comm channel ready
* this is necessary for prevention the race
* when switching between event to polling mode
*/
end = msecs_to_jiffies(timeout) + jiffies;
while (comm_pending(dev) && time_before(jiffies, end))
cond_resched();
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
spin_lock(&cmd->context_lock);
context->next = cmd->free_head;
cmd->free_head = context - cmd->context;
spin_unlock(&cmd->context_lock);
up(&cmd->event_sem);
return err;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
int mlx4_comm_cmd(struct mlx4_dev *dev, u8 cmd, u16 param,
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
unsigned long timeout)
{
if (mlx4_priv(dev)->cmd.use_events)
return mlx4_comm_cmd_wait(dev, cmd, param, timeout);
return mlx4_comm_cmd_poll(dev, cmd, param, timeout);
}
static int cmd_pending(struct mlx4_dev *dev)
{
u32 status;
if (pci_channel_offline(dev->pdev))
return -EIO;
status = readl(mlx4_priv(dev)->cmd.hcr + HCR_STATUS_OFFSET);
return (status & swab32(1 << HCR_GO_BIT)) ||
(mlx4_priv(dev)->cmd.toggle ==
!!(status & swab32(1 << HCR_T_BIT)));
}
static int mlx4_cmd_post(struct mlx4_dev *dev, u64 in_param, u64 out_param,
u32 in_modifier, u8 op_modifier, u16 op, u16 token,
int event)
{
struct mlx4_cmd *cmd = &mlx4_priv(dev)->cmd;
u32 __iomem *hcr = cmd->hcr;
int ret = -EAGAIN;
unsigned long end;
mutex_lock(&cmd->hcr_mutex);
if (pci_channel_offline(dev->pdev)) {
/*
* Device is going through error recovery
* and cannot accept commands.
*/
ret = -EIO;
goto out;
}
end = jiffies;
if (event)
end += msecs_to_jiffies(GO_BIT_TIMEOUT_MSECS);
while (cmd_pending(dev)) {
if (pci_channel_offline(dev->pdev)) {
/*
* Device is going through error recovery
* and cannot accept commands.
*/
ret = -EIO;
goto out;
}
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (time_after_eq(jiffies, end)) {
mlx4_err(dev, "%s:cmd_pending failed\n", __func__);
goto out;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
cond_resched();
}
/*
* We use writel (instead of something like memcpy_toio)
* because writes of less than 32 bits to the HCR don't work
* (and some architectures such as ia64 implement memcpy_toio
* in terms of writeb).
*/
__raw_writel((__force u32) cpu_to_be32(in_param >> 32), hcr + 0);
__raw_writel((__force u32) cpu_to_be32(in_param & 0xfffffffful), hcr + 1);
__raw_writel((__force u32) cpu_to_be32(in_modifier), hcr + 2);
__raw_writel((__force u32) cpu_to_be32(out_param >> 32), hcr + 3);
__raw_writel((__force u32) cpu_to_be32(out_param & 0xfffffffful), hcr + 4);
__raw_writel((__force u32) cpu_to_be32(token << 16), hcr + 5);
/* __raw_writel may not order writes. */
wmb();
__raw_writel((__force u32) cpu_to_be32((1 << HCR_GO_BIT) |
(cmd->toggle << HCR_T_BIT) |
(event ? (1 << HCR_E_BIT) : 0) |
(op_modifier << HCR_OPMOD_SHIFT) |
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
op), hcr + 6);
/*
* Make sure that our HCR writes don't get mixed in with
* writes from another CPU starting a FW command.
*/
mmiowb();
cmd->toggle = cmd->toggle ^ 1;
ret = 0;
out:
mutex_unlock(&cmd->hcr_mutex);
return ret;
}
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
static int mlx4_slave_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
int out_is_imm, u32 in_modifier, u8 op_modifier,
u16 op, unsigned long timeout)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_vhcr_cmd *vhcr = priv->mfunc.vhcr;
int ret;
mutex_lock(&priv->cmd.slave_cmd_mutex);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
vhcr->in_param = cpu_to_be64(in_param);
vhcr->out_param = out_param ? cpu_to_be64(*out_param) : 0;
vhcr->in_modifier = cpu_to_be32(in_modifier);
vhcr->opcode = cpu_to_be16((((u16) op_modifier) << 12) | (op & 0xfff));
vhcr->token = cpu_to_be16(CMD_POLL_TOKEN);
vhcr->status = 0;
vhcr->flags = !!(priv->cmd.use_events) << 6;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (mlx4_is_master(dev)) {
ret = mlx4_master_process_vhcr(dev, dev->caps.function, vhcr);
if (!ret) {
if (out_is_imm) {
if (out_param)
*out_param =
be64_to_cpu(vhcr->out_param);
else {
mlx4_err(dev, "response expected while"
"output mailbox is NULL for "
"command 0x%x\n", op);
vhcr->status = CMD_STAT_BAD_PARAM;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
}
ret = mlx4_status_to_errno(vhcr->status);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
} else {
ret = mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR_POST, 0,
MLX4_COMM_TIME + timeout);
if (!ret) {
if (out_is_imm) {
if (out_param)
*out_param =
be64_to_cpu(vhcr->out_param);
else {
mlx4_err(dev, "response expected while"
"output mailbox is NULL for "
"command 0x%x\n", op);
vhcr->status = CMD_STAT_BAD_PARAM;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
}
ret = mlx4_status_to_errno(vhcr->status);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
} else
mlx4_err(dev, "failed execution of VHCR_POST command"
"opcode 0x%x\n", op);
}
mutex_unlock(&priv->cmd.slave_cmd_mutex);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
return ret;
}
static int mlx4_cmd_poll(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
int out_is_imm, u32 in_modifier, u8 op_modifier,
u16 op, unsigned long timeout)
{
struct mlx4_priv *priv = mlx4_priv(dev);
void __iomem *hcr = priv->cmd.hcr;
int err = 0;
unsigned long end;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
u32 stat;
down(&priv->cmd.poll_sem);
if (pci_channel_offline(dev->pdev)) {
/*
* Device is going through error recovery
* and cannot accept commands.
*/
err = -EIO;
goto out;
}
err = mlx4_cmd_post(dev, in_param, out_param ? *out_param : 0,
in_modifier, op_modifier, op, CMD_POLL_TOKEN, 0);
if (err)
goto out;
end = msecs_to_jiffies(timeout) + jiffies;
while (cmd_pending(dev) && time_before(jiffies, end)) {
if (pci_channel_offline(dev->pdev)) {
/*
* Device is going through error recovery
* and cannot accept commands.
*/
err = -EIO;
goto out;
}
cond_resched();
}
if (cmd_pending(dev)) {
mlx4_warn(dev, "command 0x%x timed out (go bit not cleared)\n",
op);
err = -ETIMEDOUT;
goto out;
}
if (out_is_imm)
*out_param =
(u64) be32_to_cpu((__force __be32)
__raw_readl(hcr + HCR_OUT_PARAM_OFFSET)) << 32 |
(u64) be32_to_cpu((__force __be32)
__raw_readl(hcr + HCR_OUT_PARAM_OFFSET + 4));
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
stat = be32_to_cpu((__force __be32)
__raw_readl(hcr + HCR_STATUS_OFFSET)) >> 24;
err = mlx4_status_to_errno(stat);
if (err)
mlx4_err(dev, "command 0x%x failed: fw status = 0x%x\n",
op, stat);
out:
up(&priv->cmd.poll_sem);
return err;
}
void mlx4_cmd_event(struct mlx4_dev *dev, u16 token, u8 status, u64 out_param)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_cmd_context *context =
&priv->cmd.context[token & priv->cmd.token_mask];
/* previously timed out command completing at long last */
if (token != context->token)
return;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
context->fw_status = status;
context->result = mlx4_status_to_errno(status);
context->out_param = out_param;
complete(&context->done);
}
static int mlx4_cmd_wait(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
int out_is_imm, u32 in_modifier, u8 op_modifier,
u16 op, unsigned long timeout)
{
struct mlx4_cmd *cmd = &mlx4_priv(dev)->cmd;
struct mlx4_cmd_context *context;
int err = 0;
down(&cmd->event_sem);
spin_lock(&cmd->context_lock);
BUG_ON(cmd->free_head < 0);
context = &cmd->context[cmd->free_head];
context->token += cmd->token_mask + 1;
cmd->free_head = context->next;
spin_unlock(&cmd->context_lock);
init_completion(&context->done);
mlx4_cmd_post(dev, in_param, out_param ? *out_param : 0,
in_modifier, op_modifier, op, context->token, 1);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (!wait_for_completion_timeout(&context->done,
msecs_to_jiffies(timeout))) {
mlx4_warn(dev, "command 0x%x timed out (go bit not cleared)\n",
op);
err = -EBUSY;
goto out;
}
err = context->result;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (err) {
mlx4_err(dev, "command 0x%x failed: fw status = 0x%x\n",
op, context->fw_status);
goto out;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
if (out_is_imm)
*out_param = context->out_param;
out:
spin_lock(&cmd->context_lock);
context->next = cmd->free_head;
cmd->free_head = context - cmd->context;
spin_unlock(&cmd->context_lock);
up(&cmd->event_sem);
return err;
}
int __mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
int out_is_imm, u32 in_modifier, u8 op_modifier,
u16 op, unsigned long timeout, int native)
{
if (pci_channel_offline(dev->pdev))
return -EIO;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (!mlx4_is_mfunc(dev) || (native && mlx4_is_master(dev))) {
if (mlx4_priv(dev)->cmd.use_events)
return mlx4_cmd_wait(dev, in_param, out_param,
out_is_imm, in_modifier,
op_modifier, op, timeout);
else
return mlx4_cmd_poll(dev, in_param, out_param,
out_is_imm, in_modifier,
op_modifier, op, timeout);
}
return mlx4_slave_cmd(dev, in_param, out_param, out_is_imm,
in_modifier, op_modifier, op, timeout);
}
EXPORT_SYMBOL_GPL(__mlx4_cmd);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
static int mlx4_ARM_COMM_CHANNEL(struct mlx4_dev *dev)
{
return mlx4_cmd(dev, 0, 0, 0, MLX4_CMD_ARM_COMM_CHANNEL,
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
}
static int mlx4_ACCESS_MEM(struct mlx4_dev *dev, u64 master_addr,
int slave, u64 slave_addr,
int size, int is_read)
{
u64 in_param;
u64 out_param;
if ((slave_addr & 0xfff) | (master_addr & 0xfff) |
(slave & ~0x7f) | (size & 0xff)) {
mlx4_err(dev, "Bad access mem params - slave_addr:0x%llx "
"master_addr:0x%llx slave_id:%d size:%d\n",
slave_addr, master_addr, slave, size);
return -EINVAL;
}
if (is_read) {
in_param = (u64) slave | slave_addr;
out_param = (u64) dev->caps.function | master_addr;
} else {
in_param = (u64) dev->caps.function | master_addr;
out_param = (u64) slave | slave_addr;
}
return mlx4_cmd_imm(dev, in_param, &out_param, size, 0,
MLX4_CMD_ACCESS_MEM,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
}
static int query_pkey_block(struct mlx4_dev *dev, u8 port, u16 index, u16 *pkey,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox)
{
struct ib_smp *in_mad = (struct ib_smp *)(inbox->buf);
struct ib_smp *out_mad = (struct ib_smp *)(outbox->buf);
int err;
int i;
if (index & 0x1f)
return -EINVAL;
in_mad->attr_mod = cpu_to_be32(index / 32);
err = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3,
MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C,
MLX4_CMD_NATIVE);
if (err)
return err;
for (i = 0; i < 32; ++i)
pkey[i] = be16_to_cpu(((__be16 *) out_mad->data)[i]);
return err;
}
static int get_full_pkey_table(struct mlx4_dev *dev, u8 port, u16 *table,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox)
{
int i;
int err;
for (i = 0; i < dev->caps.pkey_table_len[port]; i += 32) {
err = query_pkey_block(dev, port, i, table + i, inbox, outbox);
if (err)
return err;
}
return 0;
}
#define PORT_CAPABILITY_LOCATION_IN_SMP 20
#define PORT_STATE_OFFSET 32
static enum ib_port_state vf_port_state(struct mlx4_dev *dev, int port, int vf)
{
if (mlx4_get_slave_port_state(dev, vf, port) == SLAVE_PORT_UP)
return IB_PORT_ACTIVE;
else
return IB_PORT_DOWN;
}
static int mlx4_MAD_IFC_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
struct ib_smp *smp = inbox->buf;
u32 index;
u8 port;
u16 *table;
int err;
int vidx, pidx;
struct mlx4_priv *priv = mlx4_priv(dev);
struct ib_smp *outsmp = outbox->buf;
__be16 *outtab = (__be16 *)(outsmp->data);
__be32 slave_cap_mask;
__be64 slave_node_guid;
port = vhcr->in_modifier;
if (smp->base_version == 1 &&
smp->mgmt_class == IB_MGMT_CLASS_SUBN_LID_ROUTED &&
smp->class_version == 1) {
if (smp->method == IB_MGMT_METHOD_GET) {
if (smp->attr_id == IB_SMP_ATTR_PKEY_TABLE) {
index = be32_to_cpu(smp->attr_mod);
if (port < 1 || port > dev->caps.num_ports)
return -EINVAL;
table = kcalloc(dev->caps.pkey_table_len[port], sizeof *table, GFP_KERNEL);
if (!table)
return -ENOMEM;
/* need to get the full pkey table because the paravirtualized
* pkeys may be scattered among several pkey blocks.
*/
err = get_full_pkey_table(dev, port, table, inbox, outbox);
if (!err) {
for (vidx = index * 32; vidx < (index + 1) * 32; ++vidx) {
pidx = priv->virt2phys_pkey[slave][port - 1][vidx];
outtab[vidx % 32] = cpu_to_be16(table[pidx]);
}
}
kfree(table);
return err;
}
if (smp->attr_id == IB_SMP_ATTR_PORT_INFO) {
/*get the slave specific caps:*/
/*do the command */
err = mlx4_cmd_box(dev, inbox->dma, outbox->dma,
vhcr->in_modifier, vhcr->op_modifier,
vhcr->op, MLX4_CMD_TIME_CLASS_C, MLX4_CMD_NATIVE);
/* modify the response for slaves */
if (!err && slave != mlx4_master_func_num(dev)) {
u8 *state = outsmp->data + PORT_STATE_OFFSET;
*state = (*state & 0xf0) | vf_port_state(dev, port, slave);
slave_cap_mask = priv->mfunc.master.slave_state[slave].ib_cap_mask[port];
memcpy(outsmp->data + PORT_CAPABILITY_LOCATION_IN_SMP, &slave_cap_mask, 4);
}
return err;
}
if (smp->attr_id == IB_SMP_ATTR_GUID_INFO) {
/* compute slave's gid block */
smp->attr_mod = cpu_to_be32(slave / 8);
/* execute cmd */
err = mlx4_cmd_box(dev, inbox->dma, outbox->dma,
vhcr->in_modifier, vhcr->op_modifier,
vhcr->op, MLX4_CMD_TIME_CLASS_C, MLX4_CMD_NATIVE);
if (!err) {
/* if needed, move slave gid to index 0 */
if (slave % 8)
memcpy(outsmp->data,
outsmp->data + (slave % 8) * 8, 8);
/* delete all other gids */
memset(outsmp->data + 8, 0, 56);
}
return err;
}
if (smp->attr_id == IB_SMP_ATTR_NODE_INFO) {
err = mlx4_cmd_box(dev, inbox->dma, outbox->dma,
vhcr->in_modifier, vhcr->op_modifier,
vhcr->op, MLX4_CMD_TIME_CLASS_C, MLX4_CMD_NATIVE);
if (!err) {
slave_node_guid = mlx4_get_slave_node_guid(dev, slave);
memcpy(outsmp->data + 12, &slave_node_guid, 8);
}
return err;
}
}
}
if (slave != mlx4_master_func_num(dev) &&
((smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) ||
(smp->mgmt_class == IB_MGMT_CLASS_SUBN_LID_ROUTED &&
smp->method == IB_MGMT_METHOD_SET))) {
mlx4_err(dev, "slave %d is trying to execute a Subnet MGMT MAD, "
"class 0x%x, method 0x%x for attr 0x%x. Rejecting\n",
slave, smp->method, smp->mgmt_class,
be16_to_cpu(smp->attr_id));
return -EPERM;
}
/*default:*/
return mlx4_cmd_box(dev, inbox->dma, outbox->dma,
vhcr->in_modifier, vhcr->op_modifier,
vhcr->op, MLX4_CMD_TIME_CLASS_C, MLX4_CMD_NATIVE);
}
int MLX4_CMD_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
return -EPERM;
}
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
int mlx4_DMA_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
u64 in_param;
u64 out_param;
int err;
in_param = cmd->has_inbox ? (u64) inbox->dma : vhcr->in_param;
out_param = cmd->has_outbox ? (u64) outbox->dma : vhcr->out_param;
if (cmd->encode_slave_id) {
in_param &= 0xffffffffffffff00ll;
in_param |= slave;
}
err = __mlx4_cmd(dev, in_param, &out_param, cmd->out_is_imm,
vhcr->in_modifier, vhcr->op_modifier, vhcr->op,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (cmd->out_is_imm)
vhcr->out_param = out_param;
return err;
}
static struct mlx4_cmd_info cmd_info[] = {
{
.opcode = MLX4_CMD_QUERY_FW,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_FW_wrapper
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
},
{
.opcode = MLX4_CMD_QUERY_HCA,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = NULL
},
{
.opcode = MLX4_CMD_QUERY_DEV_CAP,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_DEV_CAP_wrapper
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
},
{
.opcode = MLX4_CMD_QUERY_FUNC_CAP,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_FUNC_CAP_wrapper
},
{
.opcode = MLX4_CMD_QUERY_ADAPTER,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = NULL
},
{
.opcode = MLX4_CMD_INIT_PORT,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_INIT_PORT_wrapper
},
{
.opcode = MLX4_CMD_CLOSE_PORT,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_CLOSE_PORT_wrapper
},
{
.opcode = MLX4_CMD_QUERY_PORT,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_PORT_wrapper
},
{
.opcode = MLX4_CMD_SET_PORT,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_SET_PORT_wrapper
},
{
.opcode = MLX4_CMD_MAP_EQ,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_MAP_EQ_wrapper
},
{
.opcode = MLX4_CMD_SW2HW_EQ,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = true,
.verify = NULL,
.wrapper = mlx4_SW2HW_EQ_wrapper
},
{
.opcode = MLX4_CMD_HW_HEALTH_CHECK,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = NULL
},
{
.opcode = MLX4_CMD_NOP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = NULL
},
{
.opcode = MLX4_CMD_ALLOC_RES,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = true,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_ALLOC_RES_wrapper
},
{
.opcode = MLX4_CMD_FREE_RES,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_FREE_RES_wrapper
},
{
.opcode = MLX4_CMD_SW2HW_MPT,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = true,
.verify = NULL,
.wrapper = mlx4_SW2HW_MPT_wrapper
},
{
.opcode = MLX4_CMD_QUERY_MPT,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_MPT_wrapper
},
{
.opcode = MLX4_CMD_HW2SW_MPT,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_HW2SW_MPT_wrapper
},
{
.opcode = MLX4_CMD_READ_MTT,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = NULL
},
{
.opcode = MLX4_CMD_WRITE_MTT,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_WRITE_MTT_wrapper
},
{
.opcode = MLX4_CMD_SYNC_TPT,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = NULL
},
{
.opcode = MLX4_CMD_HW2SW_EQ,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = true,
.verify = NULL,
.wrapper = mlx4_HW2SW_EQ_wrapper
},
{
.opcode = MLX4_CMD_QUERY_EQ,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = true,
.verify = NULL,
.wrapper = mlx4_QUERY_EQ_wrapper
},
{
.opcode = MLX4_CMD_SW2HW_CQ,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = true,
.verify = NULL,
.wrapper = mlx4_SW2HW_CQ_wrapper
},
{
.opcode = MLX4_CMD_HW2SW_CQ,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_HW2SW_CQ_wrapper
},
{
.opcode = MLX4_CMD_QUERY_CQ,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_CQ_wrapper
},
{
.opcode = MLX4_CMD_MODIFY_CQ,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = true,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_MODIFY_CQ_wrapper
},
{
.opcode = MLX4_CMD_SW2HW_SRQ,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = true,
.verify = NULL,
.wrapper = mlx4_SW2HW_SRQ_wrapper
},
{
.opcode = MLX4_CMD_HW2SW_SRQ,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_HW2SW_SRQ_wrapper
},
{
.opcode = MLX4_CMD_QUERY_SRQ,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_SRQ_wrapper
},
{
.opcode = MLX4_CMD_ARM_SRQ,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_ARM_SRQ_wrapper
},
{
.opcode = MLX4_CMD_RST2INIT_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = true,
.verify = NULL,
.wrapper = mlx4_RST2INIT_QP_wrapper
},
{
.opcode = MLX4_CMD_INIT2INIT_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_INIT2INIT_QP_wrapper
},
{
.opcode = MLX4_CMD_INIT2RTR_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_INIT2RTR_QP_wrapper
},
{
.opcode = MLX4_CMD_RTR2RTS_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_RTR2RTS_QP_wrapper
},
{
.opcode = MLX4_CMD_RTS2RTS_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_RTS2RTS_QP_wrapper
},
{
.opcode = MLX4_CMD_SQERR2RTS_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_SQERR2RTS_QP_wrapper
},
{
.opcode = MLX4_CMD_2ERR_QP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_GEN_QP_wrapper
},
{
.opcode = MLX4_CMD_RTS2SQD_QP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_GEN_QP_wrapper
},
{
.opcode = MLX4_CMD_SQD2SQD_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_SQD2SQD_QP_wrapper
},
{
.opcode = MLX4_CMD_SQD2RTS_QP,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_SQD2RTS_QP_wrapper
},
{
.opcode = MLX4_CMD_2RST_QP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_2RST_QP_wrapper
},
{
.opcode = MLX4_CMD_QUERY_QP,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_GEN_QP_wrapper
},
{
.opcode = MLX4_CMD_SUSPEND_QP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_GEN_QP_wrapper
},
{
.opcode = MLX4_CMD_UNSUSPEND_QP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_GEN_QP_wrapper
},
{
.opcode = MLX4_CMD_UPDATE_QP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = MLX4_CMD_UPDATE_QP_wrapper
},
{
.opcode = MLX4_CMD_CONF_SPECIAL_QP,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL, /* XXX verify: only demux can do this */
.wrapper = NULL
},
{
.opcode = MLX4_CMD_MAD_IFC,
.has_inbox = true,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_MAD_IFC_wrapper
},
{
.opcode = MLX4_CMD_QUERY_IF_STAT,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QUERY_IF_STAT_wrapper
},
/* Native multicast commands are not available for guests */
{
.opcode = MLX4_CMD_QP_ATTACH,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QP_ATTACH_wrapper
},
{
.opcode = MLX4_CMD_PROMISC,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_PROMISC_wrapper
},
/* Ethernet specific commands */
{
.opcode = MLX4_CMD_SET_VLAN_FLTR,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_SET_VLAN_FLTR_wrapper
},
{
.opcode = MLX4_CMD_SET_MCAST_FLTR,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_SET_MCAST_FLTR_wrapper
},
{
.opcode = MLX4_CMD_DUMP_ETH_STATS,
.has_inbox = false,
.has_outbox = true,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_DUMP_ETH_STATS_wrapper
},
{
.opcode = MLX4_CMD_INFORM_FLR_DONE,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = NULL
},
/* flow steering commands */
{
.opcode = MLX4_QP_FLOW_STEERING_ATTACH,
.has_inbox = true,
.has_outbox = false,
.out_is_imm = true,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QP_FLOW_STEERING_ATTACH_wrapper
},
{
.opcode = MLX4_QP_FLOW_STEERING_DETACH,
.has_inbox = false,
.has_outbox = false,
.out_is_imm = false,
.encode_slave_id = false,
.verify = NULL,
.wrapper = mlx4_QP_FLOW_STEERING_DETACH_wrapper
},
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
};
static int mlx4_master_process_vhcr(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr_cmd *in_vhcr)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_cmd_info *cmd = NULL;
struct mlx4_vhcr_cmd *vhcr_cmd = in_vhcr ? in_vhcr : priv->mfunc.vhcr;
struct mlx4_vhcr *vhcr;
struct mlx4_cmd_mailbox *inbox = NULL;
struct mlx4_cmd_mailbox *outbox = NULL;
u64 in_param;
u64 out_param;
int ret = 0;
int i;
int err = 0;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
/* Create sw representation of Virtual HCR */
vhcr = kzalloc(sizeof(struct mlx4_vhcr), GFP_KERNEL);
if (!vhcr)
return -ENOMEM;
/* DMA in the vHCR */
if (!in_vhcr) {
ret = mlx4_ACCESS_MEM(dev, priv->mfunc.vhcr_dma, slave,
priv->mfunc.master.slave_state[slave].vhcr_dma,
ALIGN(sizeof(struct mlx4_vhcr_cmd),
MLX4_ACCESS_MEM_ALIGN), 1);
if (ret) {
mlx4_err(dev, "%s:Failed reading vhcr"
"ret: 0x%x\n", __func__, ret);
kfree(vhcr);
return ret;
}
}
/* Fill SW VHCR fields */
vhcr->in_param = be64_to_cpu(vhcr_cmd->in_param);
vhcr->out_param = be64_to_cpu(vhcr_cmd->out_param);
vhcr->in_modifier = be32_to_cpu(vhcr_cmd->in_modifier);
vhcr->token = be16_to_cpu(vhcr_cmd->token);
vhcr->op = be16_to_cpu(vhcr_cmd->opcode) & 0xfff;
vhcr->op_modifier = (u8) (be16_to_cpu(vhcr_cmd->opcode) >> 12);
vhcr->e_bit = vhcr_cmd->flags & (1 << 6);
/* Lookup command */
for (i = 0; i < ARRAY_SIZE(cmd_info); ++i) {
if (vhcr->op == cmd_info[i].opcode) {
cmd = &cmd_info[i];
break;
}
}
if (!cmd) {
mlx4_err(dev, "Unknown command:0x%x accepted from slave:%d\n",
vhcr->op, slave);
vhcr_cmd->status = CMD_STAT_BAD_PARAM;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
goto out_status;
}
/* Read inbox */
if (cmd->has_inbox) {
vhcr->in_param &= INBOX_MASK;
inbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(inbox)) {
vhcr_cmd->status = CMD_STAT_BAD_SIZE;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
inbox = NULL;
goto out_status;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
if (mlx4_ACCESS_MEM(dev, inbox->dma, slave,
vhcr->in_param,
MLX4_MAILBOX_SIZE, 1)) {
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
mlx4_err(dev, "%s: Failed reading inbox (cmd:0x%x)\n",
__func__, cmd->opcode);
vhcr_cmd->status = CMD_STAT_INTERNAL_ERR;
goto out_status;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
}
/* Apply permission and bound checks if applicable */
if (cmd->verify && cmd->verify(dev, slave, vhcr, inbox)) {
mlx4_warn(dev, "Command:0x%x from slave: %d failed protection "
"checks for resource_id:%d\n", vhcr->op, slave,
vhcr->in_modifier);
vhcr_cmd->status = CMD_STAT_BAD_OP;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
goto out_status;
}
/* Allocate outbox */
if (cmd->has_outbox) {
outbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(outbox)) {
vhcr_cmd->status = CMD_STAT_BAD_SIZE;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
outbox = NULL;
goto out_status;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
}
}
/* Execute the command! */
if (cmd->wrapper) {
err = cmd->wrapper(dev, slave, vhcr, inbox, outbox,
cmd);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (cmd->out_is_imm)
vhcr_cmd->out_param = cpu_to_be64(vhcr->out_param);
} else {
in_param = cmd->has_inbox ? (u64) inbox->dma :
vhcr->in_param;
out_param = cmd->has_outbox ? (u64) outbox->dma :
vhcr->out_param;
err = __mlx4_cmd(dev, in_param, &out_param,
cmd->out_is_imm, vhcr->in_modifier,
vhcr->op_modifier, vhcr->op,
MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (cmd->out_is_imm) {
vhcr->out_param = out_param;
vhcr_cmd->out_param = cpu_to_be64(vhcr->out_param);
}
}
if (err) {
mlx4_warn(dev, "vhcr command:0x%x slave:%d failed with"
" error:%d, status %d\n",
vhcr->op, slave, vhcr->errno, err);
vhcr_cmd->status = mlx4_errno_to_status(err);
goto out_status;
}
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
/* Write outbox if command completed successfully */
if (cmd->has_outbox && !vhcr_cmd->status) {
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
ret = mlx4_ACCESS_MEM(dev, outbox->dma, slave,
vhcr->out_param,
MLX4_MAILBOX_SIZE, MLX4_CMD_WRAPPED);
if (ret) {
/* If we failed to write back the outbox after the
*command was successfully executed, we must fail this
* slave, as it is now in undefined state */
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
mlx4_err(dev, "%s:Failed writing outbox\n", __func__);
goto out;
}
}
out_status:
/* DMA back vhcr result */
if (!in_vhcr) {
ret = mlx4_ACCESS_MEM(dev, priv->mfunc.vhcr_dma, slave,
priv->mfunc.master.slave_state[slave].vhcr_dma,
ALIGN(sizeof(struct mlx4_vhcr),
MLX4_ACCESS_MEM_ALIGN),
MLX4_CMD_WRAPPED);
if (ret)
mlx4_err(dev, "%s:Failed writing vhcr result\n",
__func__);
else if (vhcr->e_bit &&
mlx4_GEN_EQE(dev, slave, &priv->mfunc.master.cmd_eqe))
mlx4_warn(dev, "Failed to generate command completion "
"eqe for slave %d\n", slave);
}
out:
kfree(vhcr);
mlx4_free_cmd_mailbox(dev, inbox);
mlx4_free_cmd_mailbox(dev, outbox);
return ret;
}
static int calculate_transition(u16 oper_vlan, u16 admin_vlan)
{
return (2 * (oper_vlan == MLX4_VGT) + (admin_vlan == MLX4_VGT));
}
int mlx4_master_immediate_activate_vlan_qos(struct mlx4_priv *priv,
int slave, int port)
{
struct mlx4_vport_oper_state *vp_oper;
struct mlx4_vport_state *vp_admin;
struct mlx4_vf_immed_vlan_work *work;
struct mlx4_dev *dev = &(priv->dev);
int err;
int admin_vlan_ix = NO_INDX;
enum mlx4_vlan_transition vlan_trans;
vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
vp_admin = &priv->mfunc.master.vf_admin[slave].vport[port];
if (vp_oper->state.default_vlan == vp_admin->default_vlan &&
vp_oper->state.default_qos == vp_admin->default_qos &&
vp_oper->state.link_state == vp_admin->link_state)
return 0;
vlan_trans = calculate_transition(vp_oper->state.default_vlan,
vp_admin->default_vlan);
if (!(priv->mfunc.master.slave_state[slave].active &&
dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_UPDATE_QP &&
vlan_trans == MLX4_VLAN_TRANSITION_VST_VST)) {
/* even if the UPDATE_QP command isn't supported, we still want
* to set this VF link according to the admin directive
*/
vp_oper->state.link_state = vp_admin->link_state;
return -1;
}
mlx4_dbg(dev, "updating immediately admin params slave %d port %d\n",
slave, port);
mlx4_dbg(dev, "vlan %d QoS %d link down %d\n", vp_admin->default_vlan,
vp_admin->default_qos, vp_admin->link_state);
work = kzalloc(sizeof(*work), GFP_KERNEL);
if (!work)
return -ENOMEM;
if (vp_oper->state.default_vlan != vp_admin->default_vlan) {
err = __mlx4_register_vlan(&priv->dev, port,
vp_admin->default_vlan,
&admin_vlan_ix);
if (err) {
mlx4_warn((&priv->dev),
"No vlan resources slave %d, port %d\n",
slave, port);
return err;
}
work->flags |= MLX4_VF_IMMED_VLAN_FLAG_VLAN;
mlx4_dbg((&(priv->dev)),
"alloc vlan %d idx %d slave %d port %d\n",
(int)(vp_admin->default_vlan),
admin_vlan_ix, slave, port);
}
/* save original vlan ix and vlan id */
work->orig_vlan_id = vp_oper->state.default_vlan;
work->orig_vlan_ix = vp_oper->vlan_idx;
/* handle new qos */
if (vp_oper->state.default_qos != vp_admin->default_qos)
work->flags |= MLX4_VF_IMMED_VLAN_FLAG_QOS;
if (work->flags & MLX4_VF_IMMED_VLAN_FLAG_VLAN)
vp_oper->vlan_idx = admin_vlan_ix;
vp_oper->state.default_vlan = vp_admin->default_vlan;
vp_oper->state.default_qos = vp_admin->default_qos;
vp_oper->state.link_state = vp_admin->link_state;
if (vp_admin->link_state == IFLA_VF_LINK_STATE_DISABLE)
work->flags |= MLX4_VF_IMMED_VLAN_FLAG_LINK_DISABLE;
/* iterate over QPs owned by this slave, using UPDATE_QP */
work->port = port;
work->slave = slave;
work->qos = vp_oper->state.default_qos;
work->vlan_id = vp_oper->state.default_vlan;
work->vlan_ix = vp_oper->vlan_idx;
work->priv = priv;
INIT_WORK(&work->work, mlx4_vf_immed_vlan_work_handler);
queue_work(priv->mfunc.master.comm_wq, &work->work);
return 0;
}
static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
{
int port, err;
struct mlx4_vport_state *vp_admin;
struct mlx4_vport_oper_state *vp_oper;
for (port = 1; port <= MLX4_MAX_PORTS; port++) {
vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
vp_admin = &priv->mfunc.master.vf_admin[slave].vport[port];
vp_oper->state = *vp_admin;
if (MLX4_VGT != vp_admin->default_vlan) {
err = __mlx4_register_vlan(&priv->dev, port,
vp_admin->default_vlan, &(vp_oper->vlan_idx));
if (err) {
vp_oper->vlan_idx = NO_INDX;
mlx4_warn((&priv->dev),
"No vlan resorces slave %d, port %d\n",
slave, port);
return err;
}
mlx4_dbg((&(priv->dev)), "alloc vlan %d idx %d slave %d port %d\n",
(int)(vp_oper->state.default_vlan),
vp_oper->vlan_idx, slave, port);
}
if (vp_admin->spoofchk) {
vp_oper->mac_idx = __mlx4_register_mac(&priv->dev,
port,
vp_admin->mac);
if (0 > vp_oper->mac_idx) {
err = vp_oper->mac_idx;
vp_oper->mac_idx = NO_INDX;
mlx4_warn((&priv->dev),
"No mac resorces slave %d, port %d\n",
slave, port);
return err;
}
mlx4_dbg((&(priv->dev)), "alloc mac %llx idx %d slave %d port %d\n",
vp_oper->state.mac, vp_oper->mac_idx, slave, port);
}
}
return 0;
}
static void mlx4_master_deactivate_admin_state(struct mlx4_priv *priv, int slave)
{
int port;
struct mlx4_vport_oper_state *vp_oper;
for (port = 1; port <= MLX4_MAX_PORTS; port++) {
vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
if (NO_INDX != vp_oper->vlan_idx) {
__mlx4_unregister_vlan(&priv->dev,
port, vp_oper->vlan_idx);
vp_oper->vlan_idx = NO_INDX;
}
if (NO_INDX != vp_oper->mac_idx) {
__mlx4_unregister_mac(&priv->dev, port, vp_oper->mac_idx);
vp_oper->mac_idx = NO_INDX;
}
}
return;
}
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
static void mlx4_master_do_cmd(struct mlx4_dev *dev, int slave, u8 cmd,
u16 param, u8 toggle)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_slave_state *slave_state = priv->mfunc.master.slave_state;
u32 reply;
u8 is_going_down = 0;
int i;
unsigned long flags;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
slave_state[slave].comm_toggle ^= 1;
reply = (u32) slave_state[slave].comm_toggle << 31;
if (toggle != slave_state[slave].comm_toggle) {
mlx4_warn(dev, "Incorrect toggle %d from slave %d. *** MASTER"
"STATE COMPROMISIED ***\n", toggle, slave);
goto reset_slave;
}
if (cmd == MLX4_COMM_CMD_RESET) {
mlx4_warn(dev, "Received reset from slave:%d\n", slave);
slave_state[slave].active = false;
mlx4_master_deactivate_admin_state(priv, slave);
for (i = 0; i < MLX4_EVENT_TYPES_NUM; ++i) {
slave_state[slave].event_eq[i].eqn = -1;
slave_state[slave].event_eq[i].token = 0;
}
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
/*check if we are in the middle of FLR process,
if so return "retry" status to the slave*/
if (MLX4_COMM_CMD_FLR == slave_state[slave].last_cmd)
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
goto inform_slave_state;
mlx4_dispatch_event(dev, MLX4_DEV_EVENT_SLAVE_SHUTDOWN, slave);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
/* write the version in the event field */
reply |= mlx4_comm_get_version();
goto reset_slave;
}
/*command from slave in the middle of FLR*/
if (cmd != MLX4_COMM_CMD_RESET &&
MLX4_COMM_CMD_FLR == slave_state[slave].last_cmd) {
mlx4_warn(dev, "slave:%d is Trying to run cmd(0x%x) "
"in the middle of FLR\n", slave, cmd);
return;
}
switch (cmd) {
case MLX4_COMM_CMD_VHCR0:
if (slave_state[slave].last_cmd != MLX4_COMM_CMD_RESET)
goto reset_slave;
slave_state[slave].vhcr_dma = ((u64) param) << 48;
priv->mfunc.master.slave_state[slave].cookie = 0;
mutex_init(&priv->mfunc.master.gen_eqe_mutex[slave]);
break;
case MLX4_COMM_CMD_VHCR1:
if (slave_state[slave].last_cmd != MLX4_COMM_CMD_VHCR0)
goto reset_slave;
slave_state[slave].vhcr_dma |= ((u64) param) << 32;
break;
case MLX4_COMM_CMD_VHCR2:
if (slave_state[slave].last_cmd != MLX4_COMM_CMD_VHCR1)
goto reset_slave;
slave_state[slave].vhcr_dma |= ((u64) param) << 16;
break;
case MLX4_COMM_CMD_VHCR_EN:
if (slave_state[slave].last_cmd != MLX4_COMM_CMD_VHCR2)
goto reset_slave;
slave_state[slave].vhcr_dma |= param;
if (mlx4_master_activate_admin_state(priv, slave))
goto reset_slave;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
slave_state[slave].active = true;
mlx4_dispatch_event(dev, MLX4_DEV_EVENT_SLAVE_INIT, slave);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
break;
case MLX4_COMM_CMD_VHCR_POST:
if ((slave_state[slave].last_cmd != MLX4_COMM_CMD_VHCR_EN) &&
(slave_state[slave].last_cmd != MLX4_COMM_CMD_VHCR_POST))
goto reset_slave;
mutex_lock(&priv->cmd.slave_cmd_mutex);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (mlx4_master_process_vhcr(dev, slave, NULL)) {
mlx4_err(dev, "Failed processing vhcr for slave:%d,"
" resetting slave.\n", slave);
mutex_unlock(&priv->cmd.slave_cmd_mutex);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
goto reset_slave;
}
mutex_unlock(&priv->cmd.slave_cmd_mutex);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
break;
default:
mlx4_warn(dev, "Bad comm cmd:%d from slave:%d\n", cmd, slave);
goto reset_slave;
}
spin_lock_irqsave(&priv->mfunc.master.slave_state_lock, flags);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (!slave_state[slave].is_slave_going_down)
slave_state[slave].last_cmd = cmd;
else
is_going_down = 1;
spin_unlock_irqrestore(&priv->mfunc.master.slave_state_lock, flags);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (is_going_down) {
mlx4_warn(dev, "Slave is going down aborting command(%d)"
" executing from slave:%d\n",
cmd, slave);
return;
}
__raw_writel((__force u32) cpu_to_be32(reply),
&priv->mfunc.comm[slave].slave_read);
mmiowb();
return;
reset_slave:
/* cleanup any slave resources */
mlx4_delete_all_resources_for_slave(dev, slave);
spin_lock_irqsave(&priv->mfunc.master.slave_state_lock, flags);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (!slave_state[slave].is_slave_going_down)
slave_state[slave].last_cmd = MLX4_COMM_CMD_RESET;
spin_unlock_irqrestore(&priv->mfunc.master.slave_state_lock, flags);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
/*with slave in the middle of flr, no need to clean resources again.*/
inform_slave_state:
memset(&slave_state[slave].event_eq, 0,
sizeof(struct mlx4_slave_event_eq_info));
__raw_writel((__force u32) cpu_to_be32(reply),
&priv->mfunc.comm[slave].slave_read);
wmb();
}
/* master command processing */
void mlx4_master_comm_channel(struct work_struct *work)
{
struct mlx4_mfunc_master_ctx *master =
container_of(work,
struct mlx4_mfunc_master_ctx,
comm_work);
struct mlx4_mfunc *mfunc =
container_of(master, struct mlx4_mfunc, master);
struct mlx4_priv *priv =
container_of(mfunc, struct mlx4_priv, mfunc);
struct mlx4_dev *dev = &priv->dev;
__be32 *bit_vec;
u32 comm_cmd;
u32 vec;
int i, j, slave;
int toggle;
int served = 0;
int reported = 0;
u32 slt;
bit_vec = master->comm_arm_bit_vector;
for (i = 0; i < COMM_CHANNEL_BIT_ARRAY_SIZE; i++) {
vec = be32_to_cpu(bit_vec[i]);
for (j = 0; j < 32; j++) {
if (!(vec & (1 << j)))
continue;
++reported;
slave = (i * 32) + j;
comm_cmd = swab32(readl(
&mfunc->comm[slave].slave_write));
slt = swab32(readl(&mfunc->comm[slave].slave_read))
>> 31;
toggle = comm_cmd >> 31;
if (toggle != slt) {
if (master->slave_state[slave].comm_toggle
!= slt) {
printk(KERN_INFO "slave %d out of sync."
" read toggle %d, state toggle %d. "
"Resynching.\n", slave, slt,
master->slave_state[slave].comm_toggle);
master->slave_state[slave].comm_toggle =
slt;
}
mlx4_master_do_cmd(dev, slave,
comm_cmd >> 16 & 0xff,
comm_cmd & 0xffff, toggle);
++served;
}
}
}
if (reported && reported != served)
mlx4_warn(dev, "Got command event with bitmask from %d slaves"
" but %d were served\n",
reported, served);
if (mlx4_ARM_COMM_CHANNEL(dev))
mlx4_warn(dev, "Failed to arm comm channel events\n");
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
static int sync_toggles(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int wr_toggle;
int rd_toggle;
unsigned long end;
wr_toggle = swab32(readl(&priv->mfunc.comm->slave_write)) >> 31;
end = jiffies + msecs_to_jiffies(5000);
while (time_before(jiffies, end)) {
rd_toggle = swab32(readl(&priv->mfunc.comm->slave_read)) >> 31;
if (rd_toggle == wr_toggle) {
priv->cmd.comm_toggle = rd_toggle;
return 0;
}
cond_resched();
}
/*
* we could reach here if for example the previous VM using this
* function misbehaved and left the channel with unsynced state. We
* should fix this here and give this VM a chance to use a properly
* synced channel
*/
mlx4_warn(dev, "recovering from previously mis-behaved VM\n");
__raw_writel((__force u32) 0, &priv->mfunc.comm->slave_read);
__raw_writel((__force u32) 0, &priv->mfunc.comm->slave_write);
priv->cmd.comm_toggle = 0;
return 0;
}
int mlx4_multi_func_init(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_slave_state *s_state;
int i, j, err, port;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
if (mlx4_is_master(dev))
priv->mfunc.comm =
ioremap(pci_resource_start(dev->pdev, priv->fw.comm_bar) +
priv->fw.comm_base, MLX4_COMM_PAGESIZE);
else
priv->mfunc.comm =
ioremap(pci_resource_start(dev->pdev, 2) +
MLX4_SLAVE_COMM_BASE, MLX4_COMM_PAGESIZE);
if (!priv->mfunc.comm) {
mlx4_err(dev, "Couldn't map communication vector.\n");
goto err_vhcr;
}
if (mlx4_is_master(dev)) {
priv->mfunc.master.slave_state =
kzalloc(dev->num_slaves *
sizeof(struct mlx4_slave_state), GFP_KERNEL);
if (!priv->mfunc.master.slave_state)
goto err_comm;
priv->mfunc.master.vf_admin =
kzalloc(dev->num_slaves *
sizeof(struct mlx4_vf_admin_state), GFP_KERNEL);
if (!priv->mfunc.master.vf_admin)
goto err_comm_admin;
priv->mfunc.master.vf_oper =
kzalloc(dev->num_slaves *
sizeof(struct mlx4_vf_oper_state), GFP_KERNEL);
if (!priv->mfunc.master.vf_oper)
goto err_comm_oper;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
for (i = 0; i < dev->num_slaves; ++i) {
s_state = &priv->mfunc.master.slave_state[i];
s_state->last_cmd = MLX4_COMM_CMD_RESET;
for (j = 0; j < MLX4_EVENT_TYPES_NUM; ++j)
s_state->event_eq[j].eqn = -1;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
__raw_writel((__force u32) 0,
&priv->mfunc.comm[i].slave_write);
__raw_writel((__force u32) 0,
&priv->mfunc.comm[i].slave_read);
mmiowb();
for (port = 1; port <= MLX4_MAX_PORTS; port++) {
s_state->vlan_filter[port] =
kzalloc(sizeof(struct mlx4_vlan_fltr),
GFP_KERNEL);
if (!s_state->vlan_filter[port]) {
if (--port)
kfree(s_state->vlan_filter[port]);
goto err_slaves;
}
INIT_LIST_HEAD(&s_state->mcast_filters[port]);
priv->mfunc.master.vf_admin[i].vport[port].default_vlan = MLX4_VGT;
priv->mfunc.master.vf_oper[i].vport[port].state.default_vlan = MLX4_VGT;
priv->mfunc.master.vf_oper[i].vport[port].vlan_idx = NO_INDX;
priv->mfunc.master.vf_oper[i].vport[port].mac_idx = NO_INDX;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
}
spin_lock_init(&s_state->lock);
}
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
memset(&priv->mfunc.master.cmd_eqe, 0, dev->caps.eqe_size);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
priv->mfunc.master.cmd_eqe.type = MLX4_EVENT_TYPE_CMD;
INIT_WORK(&priv->mfunc.master.comm_work,
mlx4_master_comm_channel);
INIT_WORK(&priv->mfunc.master.slave_event_work,
mlx4_gen_slave_eqe);
INIT_WORK(&priv->mfunc.master.slave_flr_event_work,
mlx4_master_handle_slave_flr);
spin_lock_init(&priv->mfunc.master.slave_state_lock);
spin_lock_init(&priv->mfunc.master.slave_eq.event_lock);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
priv->mfunc.master.comm_wq =
create_singlethread_workqueue("mlx4_comm");
if (!priv->mfunc.master.comm_wq)
goto err_slaves;
if (mlx4_init_resource_tracker(dev))
goto err_thread;
err = mlx4_ARM_COMM_CHANNEL(dev);
if (err) {
mlx4_err(dev, " Failed to arm comm channel eq: %x\n",
err);
goto err_resource;
}
} else {
err = sync_toggles(dev);
if (err) {
mlx4_err(dev, "Couldn't sync toggles\n");
goto err_comm;
}
}
return 0;
err_resource:
mlx4_free_resource_tracker(dev, RES_TR_FREE_ALL);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
err_thread:
flush_workqueue(priv->mfunc.master.comm_wq);
destroy_workqueue(priv->mfunc.master.comm_wq);
err_slaves:
while (--i) {
for (port = 1; port <= MLX4_MAX_PORTS; port++)
kfree(priv->mfunc.master.slave_state[i].vlan_filter[port]);
}
kfree(priv->mfunc.master.vf_oper);
err_comm_oper:
kfree(priv->mfunc.master.vf_admin);
err_comm_admin:
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
kfree(priv->mfunc.master.slave_state);
err_comm:
iounmap(priv->mfunc.comm);
err_vhcr:
dma_free_coherent(&(dev->pdev->dev), PAGE_SIZE,
priv->mfunc.vhcr,
priv->mfunc.vhcr_dma);
priv->mfunc.vhcr = NULL;
return -ENOMEM;
}
int mlx4_cmd_init(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
mutex_init(&priv->cmd.hcr_mutex);
mutex_init(&priv->cmd.slave_cmd_mutex);
sema_init(&priv->cmd.poll_sem, 1);
priv->cmd.use_events = 0;
priv->cmd.toggle = 1;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
priv->cmd.hcr = NULL;
priv->mfunc.vhcr = NULL;
if (!mlx4_is_slave(dev)) {
priv->cmd.hcr = ioremap(pci_resource_start(dev->pdev, 0) +
MLX4_HCR_BASE, MLX4_HCR_SIZE);
if (!priv->cmd.hcr) {
mlx4_err(dev, "Couldn't map command register.\n");
return -ENOMEM;
}
}
if (mlx4_is_mfunc(dev)) {
priv->mfunc.vhcr = dma_alloc_coherent(&(dev->pdev->dev), PAGE_SIZE,
&priv->mfunc.vhcr_dma,
GFP_KERNEL);
if (!priv->mfunc.vhcr)
goto err_hcr;
}
priv->cmd.pool = pci_pool_create("mlx4_cmd", dev->pdev,
MLX4_MAILBOX_SIZE,
MLX4_MAILBOX_SIZE, 0);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (!priv->cmd.pool)
goto err_vhcr;
return 0;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
err_vhcr:
if (mlx4_is_mfunc(dev))
dma_free_coherent(&(dev->pdev->dev), PAGE_SIZE,
priv->mfunc.vhcr, priv->mfunc.vhcr_dma);
priv->mfunc.vhcr = NULL;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
err_hcr:
if (!mlx4_is_slave(dev))
iounmap(priv->cmd.hcr);
return -ENOMEM;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
void mlx4_multi_func_cleanup(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int i, port;
if (mlx4_is_master(dev)) {
flush_workqueue(priv->mfunc.master.comm_wq);
destroy_workqueue(priv->mfunc.master.comm_wq);
for (i = 0; i < dev->num_slaves; i++) {
for (port = 1; port <= MLX4_MAX_PORTS; port++)
kfree(priv->mfunc.master.slave_state[i].vlan_filter[port]);
}
kfree(priv->mfunc.master.slave_state);
kfree(priv->mfunc.master.vf_admin);
kfree(priv->mfunc.master.vf_oper);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
}
iounmap(priv->mfunc.comm);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
}
void mlx4_cmd_cleanup(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
pci_pool_destroy(priv->cmd.pool);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
if (!mlx4_is_slave(dev))
iounmap(priv->cmd.hcr);
if (mlx4_is_mfunc(dev))
dma_free_coherent(&(dev->pdev->dev), PAGE_SIZE,
priv->mfunc.vhcr, priv->mfunc.vhcr_dma);
priv->mfunc.vhcr = NULL;
}
/*
* Switch to using events to issue FW commands (can only be called
* after event queue for command events has been initialized).
*/
int mlx4_cmd_use_events(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int i;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
int err = 0;
priv->cmd.context = kmalloc(priv->cmd.max_cmds *
sizeof (struct mlx4_cmd_context),
GFP_KERNEL);
if (!priv->cmd.context)
return -ENOMEM;
for (i = 0; i < priv->cmd.max_cmds; ++i) {
priv->cmd.context[i].token = i;
priv->cmd.context[i].next = i + 1;
}
priv->cmd.context[priv->cmd.max_cmds - 1].next = -1;
priv->cmd.free_head = 0;
sema_init(&priv->cmd.event_sem, priv->cmd.max_cmds);
spin_lock_init(&priv->cmd.context_lock);
for (priv->cmd.token_mask = 1;
priv->cmd.token_mask < priv->cmd.max_cmds;
priv->cmd.token_mask <<= 1)
; /* nothing */
--priv->cmd.token_mask;
down(&priv->cmd.poll_sem);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
priv->cmd.use_events = 1;
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
return err;
}
/*
* Switch back to polling (used when shutting down the device)
*/
void mlx4_cmd_use_polling(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int i;
priv->cmd.use_events = 0;
for (i = 0; i < priv->cmd.max_cmds; ++i)
down(&priv->cmd.event_sem);
kfree(priv->cmd.context);
up(&priv->cmd.poll_sem);
}
struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev)
{
struct mlx4_cmd_mailbox *mailbox;
mailbox = kmalloc(sizeof *mailbox, GFP_KERNEL);
if (!mailbox)
return ERR_PTR(-ENOMEM);
mailbox->buf = pci_pool_alloc(mlx4_priv(dev)->cmd.pool, GFP_KERNEL,
&mailbox->dma);
if (!mailbox->buf) {
kfree(mailbox);
return ERR_PTR(-ENOMEM);
}
return mailbox;
}
EXPORT_SYMBOL_GPL(mlx4_alloc_cmd_mailbox);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
void mlx4_free_cmd_mailbox(struct mlx4_dev *dev,
struct mlx4_cmd_mailbox *mailbox)
{
if (!mailbox)
return;
pci_pool_free(mlx4_priv(dev)->cmd.pool, mailbox->buf, mailbox->dma);
kfree(mailbox);
}
EXPORT_SYMBOL_GPL(mlx4_free_cmd_mailbox);
net/mlx4_core: Implement the master-slave communication channel When SRIOV is enabled, pf and vfs communicate via shared comm channel. The vf gets its side of the comm channel via a VF BAR. Each VF (slave) creates its vHCR (virtual HCA Command Register), Its DMA address is passed to the PF (master) using Communication Channel Register. The same Register is used to notify the master of commands posted by the slaves and for the master to pass events to the slaves, such as command completions and asynchronous events. The vHCR format is identical to the HCR format, except for the 'go' and 't' bits, which are reserved in the vHCR. Posting commands to the vHCR is identical to the way it is done with the HCR, albeit that the function/PF token fields are used instead of the HCR go bit. Specifically: - When the function prepares a new command in the vHCR, it issues the Post_vHCR_cmd communication channel command and toggles the value of the function token; when PF token has an equal value, the command has been accepted and a new command may be posted. - When the PF detects a Post_vHCR_cmd command, it concludes that a new command is available in the vHCR; after processing the command, the PF toggles the PF token to match the function token. When the 'e' bit is not set, the completion of a Post_vHCR_cmd command also indicates the completion the vHCR command. If, however, the 'e' bit is set, the completion of a Post_vHCR_cmd command only indicates that the vHCR command has been accepted for execution by the PF. Function commands are processed by the PF as follows: -DMA (using the ACCESS_MEM command) the vHCR image into a shadow buffer. -Validate that the opcode is non-privileged, and that the opcode- and input-modifiers are legal. -DMA the in-box (if required) into a shadow buffer. -Validate the command: o Resource ranges (e.g., QP ranges). o Partition key. o Ranges of referenced resources (e.g., CQs within QP contexts). -If the 'e' bit is set o complete the Post_vHCR_cmd command -Execute the command on the HCR. -DMA the results to the vHCR out-box (if required). -If the 'e' bit is set o Indicate command completion by generating a completion event using the GEN_EQE command -Otherwise o DMA the command status to the vHCR o Complete the Post_vHCR_cmd command Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrillin <yevgenyp@mellanox.com> Signed-off-by: Liran Liss <liranl@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:12:25 +08:00
u32 mlx4_comm_get_version(void)
{
return ((u32) CMD_CHAN_IF_REV << 8) | (u32) CMD_CHAN_VER;
}
static int mlx4_get_slave_indx(struct mlx4_dev *dev, int vf)
{
if ((vf < 0) || (vf >= dev->num_vfs)) {
mlx4_err(dev, "Bad vf number:%d (number of activated vf: %d)\n", vf, dev->num_vfs);
return -EINVAL;
}
return vf+1;
}
int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_vport_state *s_info;
int slave;
if (!mlx4_is_master(dev))
return -EPROTONOSUPPORT;
slave = mlx4_get_slave_indx(dev, vf);
if (slave < 0)
return -EINVAL;
s_info = &priv->mfunc.master.vf_admin[slave].vport[port];
s_info->mac = mac;
mlx4_info(dev, "default mac on vf %d port %d to %llX will take afect only after vf restart\n",
vf, port, s_info->mac);
return 0;
}
EXPORT_SYMBOL_GPL(mlx4_set_vf_mac);
int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_vport_oper_state *vf_oper;
struct mlx4_vport_state *vf_admin;
int slave;
if ((!mlx4_is_master(dev)) ||
!(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VLAN_CONTROL))
return -EPROTONOSUPPORT;
if ((vlan > 4095) || (qos > 7))
return -EINVAL;
slave = mlx4_get_slave_indx(dev, vf);
if (slave < 0)
return -EINVAL;
vf_admin = &priv->mfunc.master.vf_admin[slave].vport[port];
vf_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
if ((0 == vlan) && (0 == qos))
vf_admin->default_vlan = MLX4_VGT;
else
vf_admin->default_vlan = vlan;
vf_admin->default_qos = qos;
if (mlx4_master_immediate_activate_vlan_qos(priv, slave, port))
mlx4_info(dev,
"updating vf %d port %d config will take effect on next VF restart\n",
vf, port);
return 0;
}
EXPORT_SYMBOL_GPL(mlx4_set_vf_vlan);
int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_vport_state *s_info;
int slave;
if ((!mlx4_is_master(dev)) ||
!(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_FSM))
return -EPROTONOSUPPORT;
slave = mlx4_get_slave_indx(dev, vf);
if (slave < 0)
return -EINVAL;
s_info = &priv->mfunc.master.vf_admin[slave].vport[port];
s_info->spoofchk = setting;
return 0;
}
EXPORT_SYMBOL_GPL(mlx4_set_vf_spoofchk);
int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_info *ivf)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_vport_state *s_info;
int slave;
if (!mlx4_is_master(dev))
return -EPROTONOSUPPORT;
slave = mlx4_get_slave_indx(dev, vf);
if (slave < 0)
return -EINVAL;
s_info = &priv->mfunc.master.vf_admin[slave].vport[port];
ivf->vf = vf;
/* need to convert it to a func */
ivf->mac[0] = ((s_info->mac >> (5*8)) & 0xff);
ivf->mac[1] = ((s_info->mac >> (4*8)) & 0xff);
ivf->mac[2] = ((s_info->mac >> (3*8)) & 0xff);
ivf->mac[3] = ((s_info->mac >> (2*8)) & 0xff);
ivf->mac[4] = ((s_info->mac >> (1*8)) & 0xff);
ivf->mac[5] = ((s_info->mac) & 0xff);
ivf->vlan = s_info->default_vlan;
ivf->qos = s_info->default_qos;
ivf->tx_rate = s_info->tx_rate;
ivf->spoofchk = s_info->spoofchk;
ivf->linkstate = s_info->link_state;
return 0;
}
EXPORT_SYMBOL_GPL(mlx4_get_vf_config);
int mlx4_set_vf_link_state(struct mlx4_dev *dev, int port, int vf, int link_state)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_vport_state *s_info;
int slave;
u8 link_stat_event;
slave = mlx4_get_slave_indx(dev, vf);
if (slave < 0)
return -EINVAL;
switch (link_state) {
case IFLA_VF_LINK_STATE_AUTO:
/* get current link state */
if (!priv->sense.do_sense_port[port])
link_stat_event = MLX4_PORT_CHANGE_SUBTYPE_ACTIVE;
else
link_stat_event = MLX4_PORT_CHANGE_SUBTYPE_DOWN;
break;
case IFLA_VF_LINK_STATE_ENABLE:
link_stat_event = MLX4_PORT_CHANGE_SUBTYPE_ACTIVE;
break;
case IFLA_VF_LINK_STATE_DISABLE:
link_stat_event = MLX4_PORT_CHANGE_SUBTYPE_DOWN;
break;
default:
mlx4_warn(dev, "unknown value for link_state %02x on slave %d port %d\n",
link_state, slave, port);
return -EINVAL;
};
s_info = &priv->mfunc.master.vf_admin[slave].vport[port];
s_info->link_state = link_state;
/* send event */
mlx4_gen_port_state_change_eqe(dev, slave, port, link_stat_event);
if (mlx4_master_immediate_activate_vlan_qos(priv, slave, port))
mlx4_dbg(dev,
"updating vf %d port %d no link state HW enforcment\n",
vf, port);
return 0;
}
EXPORT_SYMBOL_GPL(mlx4_set_vf_link_state);