OpenCloudOS-Kernel/net/packet/af_packet.c

4708 lines
110 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* PACKET - implements raw packet sockets.
*
* Authors: Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Alan Cox, <gw4pts@gw4pts.ampr.org>
*
* Fixes:
* Alan Cox : verify_area() now used correctly
* Alan Cox : new skbuff lists, look ma no backlogs!
* Alan Cox : tidied skbuff lists.
* Alan Cox : Now uses generic datagram routines I
* added. Also fixed the peek/read crash
* from all old Linux datagram code.
* Alan Cox : Uses the improved datagram code.
* Alan Cox : Added NULL's for socket options.
* Alan Cox : Re-commented the code.
* Alan Cox : Use new kernel side addressing
* Rob Janssen : Correct MTU usage.
* Dave Platt : Counter leaks caused by incorrect
* interrupt locking and some slightly
* dubious gcc output. Can you read
* compiler: it said _VOLATILE_
* Richard Kooijman : Timestamp fixes.
* Alan Cox : New buffers. Use sk->mac.raw.
* Alan Cox : sendmsg/recvmsg support.
* Alan Cox : Protocol setting support
* Alexey Kuznetsov : Untied from IPv4 stack.
* Cyrus Durgin : Fixed kerneld for kmod.
* Michal Ostrowski : Module initialization cleanup.
* Ulises Alonso : Frame number limit removal and
* packet_set_ring memory leak.
* Eric Biederman : Allow for > 8 byte hardware addresses.
* The convention is that longer addresses
* will simply extend the hardware address
* byte arrays at the end of sockaddr_ll
* and packet_mreq.
* Johann Baudy : Added TX RING.
* Chetan Loke : Implemented TPACKET_V3 block abstraction
* layer.
* Copyright (C) 2011, <lokec@ccs.neu.edu>
*/
#include <linux/ethtool.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/capability.h>
#include <linux/fcntl.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/if_packet.h>
#include <linux/wireless.h>
#include <linux/kernel.h>
#include <linux/kmod.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
#include <linux/vmalloc.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <net/protocol.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/uaccess.h>
#include <asm/ioctls.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/poll.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/if_vlan.h>
#include <linux/virtio_net.h>
#include <linux/errqueue.h>
#include <linux/net_tstamp.h>
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
#include <linux/percpu.h>
#ifdef CONFIG_INET
#include <net/inet_common.h>
#endif
#include <linux/bpf.h>
#include <net/compat.h>
#include "internal.h"
/*
Assumptions:
2020-11-21 14:28:17 +08:00
- If the device has no dev->header_ops->create, there is no LL header
visible above the device. In this case, its hard_header_len should be 0.
net/packet: Fix a comment about hard_header_len and headroom allocation This comment is outdated and no longer reflects the actual implementation of af_packet.c. Reasons for the new comment: 1. In af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and checks if the user has provided a header sized between (dev->min_header_len) and (dev->hard_header_len) (in dev_validate_header). This shows the developers of af_packet.c expect hard_header_len to be consistent with header_ops. 2. In af_packet.c, the function packet_sendmsg_spkt has a FIXME comment. That comment states that prepending an LL header internally in a driver is considered a bug. I believe this bug can be fixed by setting hard_header_len to 0, making the internal header completely invisible to af_packet.c (and requesting the headroom in needed_headroom instead). 3. There is a commit for a WiFi driver: commit 9454f7a895b8 ("mwifiex: set needed_headroom, not hard_header_len") According to the discussion about it at: https://patchwork.kernel.org/patch/11407493/ The author tried to set the WiFi driver's hard_header_len to the Ethernet header length, and request additional header space internally needed by setting needed_headroom. This means this usage is already adopted by driver developers. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Brian Norris <briannorris@chromium.org> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 15:41:54 +08:00
The device may prepend its own header internally. In this case, its
needed_headroom should be set to the space needed for it to add its
internal header.
For example, a WiFi driver pretending to be an Ethernet driver should
set its hard_header_len to be the Ethernet header length, and set its
needed_headroom to be (the real WiFi header length - the fake Ethernet
header length).
- packet socket receives packets with pulled ll header,
so that SOCK_RAW should push it back.
On receive:
-----------
2020-11-21 14:28:17 +08:00
Incoming, dev_has_header(dev) == true
mac_header -> ll header
data -> data
2020-11-21 14:28:17 +08:00
Outgoing, dev_has_header(dev) == true
mac_header -> ll header
data -> ll header
2020-11-21 14:28:17 +08:00
Incoming, dev_has_header(dev) == false
mac_header -> data
However drivers often make it point to the ll header.
This is incorrect because the ll header should be invisible to us.
data -> data
2020-11-21 14:28:17 +08:00
Outgoing, dev_has_header(dev) == false
mac_header -> data. ll header is invisible to us.
data -> data
Resume
2020-11-21 14:28:17 +08:00
If dev_has_header(dev) == false we are unable to restore the ll header,
because it is invisible to us.
On transmit:
------------
dev_has_header(dev) == true
mac_header -> ll header
data -> ll header
dev_has_header(dev) == false (ll header is invisible to us)
mac_header -> data
data -> data
We should set network_header on output to the correct position,
packet classifier depends on it.
*/
/* Private packet socket structures. */
/* identical to struct packet_mreq except it has
* a longer address field.
*/
struct packet_mreq_max {
int mr_ifindex;
unsigned short mr_type;
unsigned short mr_alen;
unsigned char mr_address[MAX_ADDR_LEN];
};
union tpacket_uhdr {
struct tpacket_hdr *h1;
struct tpacket2_hdr *h2;
struct tpacket3_hdr *h3;
void *raw;
};
static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u,
int closing, int tx_ring);
#define V3_ALIGNMENT (8)
#define BLK_HDR_LEN (ALIGN(sizeof(struct tpacket_block_desc), V3_ALIGNMENT))
#define BLK_PLUS_PRIV(sz_of_priv) \
(BLK_HDR_LEN + ALIGN((sz_of_priv), V3_ALIGNMENT))
#define BLOCK_STATUS(x) ((x)->hdr.bh1.block_status)
#define BLOCK_NUM_PKTS(x) ((x)->hdr.bh1.num_pkts)
#define BLOCK_O2FP(x) ((x)->hdr.bh1.offset_to_first_pkt)
#define BLOCK_LEN(x) ((x)->hdr.bh1.blk_len)
#define BLOCK_SNUM(x) ((x)->hdr.bh1.seq_num)
#define BLOCK_O2PRIV(x) ((x)->offset_to_priv)
struct packet_sock;
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev);
static void *packet_previous_frame(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status);
static void packet_increment_head(struct packet_ring_buffer *buff);
static int prb_curr_blk_in_use(struct tpacket_block_desc *);
static void *prb_dispatch_next_block(struct tpacket_kbdq_core *,
struct packet_sock *);
static void prb_retire_current_block(struct tpacket_kbdq_core *,
struct packet_sock *, unsigned int status);
static int prb_queue_frozen(struct tpacket_kbdq_core *);
static void prb_open_block(struct tpacket_kbdq_core *,
struct tpacket_block_desc *);
static void prb_retire_rx_blk_timer_expired(struct timer_list *);
static void _prb_refresh_rx_retire_blk_timer(struct tpacket_kbdq_core *);
static void prb_fill_rxhash(struct tpacket_kbdq_core *, struct tpacket3_hdr *);
static void prb_clear_rxhash(struct tpacket_kbdq_core *,
struct tpacket3_hdr *);
static void prb_fill_vlan_info(struct tpacket_kbdq_core *,
struct tpacket3_hdr *);
static void packet_flush_mclist(struct sock *sk);
static u16 packet_pick_tx_queue(struct sk_buff *skb);
struct packet_skb_cb {
union {
struct sockaddr_pkt pkt;
union {
/* Trick: alias skb original length with
* ll.sll_family and ll.protocol in order
* to save room.
*/
unsigned int origlen;
struct sockaddr_ll ll;
};
} sa;
};
#define vio_le() virtio_legacy_is_little_endian()
#define PACKET_SKB_CB(__skb) ((struct packet_skb_cb *)((__skb)->cb))
#define GET_PBDQC_FROM_RB(x) ((struct tpacket_kbdq_core *)(&(x)->prb_bdqc))
#define GET_PBLOCK_DESC(x, bid) \
((struct tpacket_block_desc *)((x)->pkbdq[(bid)].buffer))
#define GET_CURR_PBLOCK_DESC_FROM_CORE(x) \
((struct tpacket_block_desc *)((x)->pkbdq[(x)->kactive_blk_num].buffer))
#define GET_NEXT_PRB_BLK_NUM(x) \
(((x)->kactive_blk_num < ((x)->knum_blocks-1)) ? \
((x)->kactive_blk_num+1) : 0)
static void __fanout_unlink(struct sock *sk, struct packet_sock *po);
static void __fanout_link(struct sock *sk, struct packet_sock *po);
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
static int packet_direct_xmit(struct sk_buff *skb)
{
return dev_direct_xmit(skb, packet_pick_tx_queue(skb));
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
}
static struct net_device *packet_cached_dev_get(struct packet_sock *po)
{
struct net_device *dev;
rcu_read_lock();
dev = rcu_dereference(po->cached_dev);
if (likely(dev))
dev_hold(dev);
rcu_read_unlock();
return dev;
}
static void packet_cached_dev_assign(struct packet_sock *po,
struct net_device *dev)
{
rcu_assign_pointer(po->cached_dev, dev);
}
static void packet_cached_dev_reset(struct packet_sock *po)
{
RCU_INIT_POINTER(po->cached_dev, NULL);
}
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
static bool packet_use_direct_xmit(const struct packet_sock *po)
{
return po->xmit == packet_direct_xmit;
}
static u16 packet_pick_tx_queue(struct sk_buff *skb)
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
{
struct net_device *dev = skb->dev;
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
const struct net_device_ops *ops = dev->netdev_ops;
int cpu = raw_smp_processor_id();
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
u16 queue_index;
#ifdef CONFIG_XPS
skb->sender_cpu = cpu + 1;
#endif
skb_record_rx_queue(skb, cpu % dev->real_num_tx_queues);
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
if (ops->ndo_select_queue) {
queue_index = ops->ndo_select_queue(dev, skb, NULL);
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
queue_index = netdev_cap_txqueue(dev, queue_index);
} else {
queue_index = netdev_pick_tx(dev, skb, NULL);
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
}
return queue_index;
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
}
/* __register_prot_hook must be invoked through register_prot_hook
* or from a context in which asynchronous accesses to the packet
* socket is not possible (packet_create()).
*/
static void __register_prot_hook(struct sock *sk)
{
struct packet_sock *po = pkt_sk(sk);
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
if (!po->running) {
if (po->fanout)
__fanout_link(sk, po);
else
dev_add_pack(&po->prot_hook);
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
sock_hold(sk);
po->running = 1;
}
}
static void register_prot_hook(struct sock *sk)
{
lockdep_assert_held_once(&pkt_sk(sk)->bind_lock);
__register_prot_hook(sk);
}
/* If the sync parameter is true, we will temporarily drop
* the po->bind_lock and do a synchronize_net to make sure no
* asynchronous packet processing paths still refer to the elements
* of po->prot_hook. If the sync parameter is false, it is the
* callers responsibility to take care of this.
*/
static void __unregister_prot_hook(struct sock *sk, bool sync)
{
struct packet_sock *po = pkt_sk(sk);
lockdep_assert_held_once(&po->bind_lock);
po->running = 0;
if (po->fanout)
__fanout_unlink(sk, po);
else
__dev_remove_pack(&po->prot_hook);
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
__sock_put(sk);
if (sync) {
spin_unlock(&po->bind_lock);
synchronize_net();
spin_lock(&po->bind_lock);
}
}
static void unregister_prot_hook(struct sock *sk, bool sync)
{
struct packet_sock *po = pkt_sk(sk);
if (po->running)
__unregister_prot_hook(sk, sync);
}
static inline struct page * __pure pgv_to_page(void *addr)
{
if (is_vmalloc_addr(addr))
return vmalloc_to_page(addr);
return virt_to_page(addr);
}
static void __packet_set_status(struct packet_sock *po, void *frame, int status)
{
union tpacket_uhdr h;
h.raw = frame;
switch (po->tp_version) {
case TPACKET_V1:
h.h1->tp_status = status;
flush_dcache_page(pgv_to_page(&h.h1->tp_status));
break;
case TPACKET_V2:
h.h2->tp_status = status;
flush_dcache_page(pgv_to_page(&h.h2->tp_status));
break;
case TPACKET_V3:
h.h3->tp_status = status;
flush_dcache_page(pgv_to_page(&h.h3->tp_status));
break;
default:
WARN(1, "TPACKET version not supported.\n");
BUG();
}
smp_wmb();
}
static int __packet_get_status(const struct packet_sock *po, void *frame)
{
union tpacket_uhdr h;
smp_rmb();
h.raw = frame;
switch (po->tp_version) {
case TPACKET_V1:
flush_dcache_page(pgv_to_page(&h.h1->tp_status));
return h.h1->tp_status;
case TPACKET_V2:
flush_dcache_page(pgv_to_page(&h.h2->tp_status));
return h.h2->tp_status;
case TPACKET_V3:
flush_dcache_page(pgv_to_page(&h.h3->tp_status));
return h.h3->tp_status;
default:
WARN(1, "TPACKET version not supported.\n");
BUG();
return 0;
}
}
static __u32 tpacket_get_timestamp(struct sk_buff *skb, struct timespec64 *ts,
unsigned int flags)
{
struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb);
if (shhwtstamps &&
(flags & SOF_TIMESTAMPING_RAW_HARDWARE) &&
ktime_to_timespec64_cond(shhwtstamps->hwtstamp, ts))
return TP_STATUS_TS_RAW_HARDWARE;
if ((flags & SOF_TIMESTAMPING_SOFTWARE) &&
ktime_to_timespec64_cond(skb->tstamp, ts))
return TP_STATUS_TS_SOFTWARE;
return 0;
}
static __u32 __packet_set_timestamp(struct packet_sock *po, void *frame,
struct sk_buff *skb)
{
union tpacket_uhdr h;
struct timespec64 ts;
__u32 ts_status;
if (!(ts_status = tpacket_get_timestamp(skb, &ts, po->tp_tstamp)))
return 0;
h.raw = frame;
/*
* versions 1 through 3 overflow the timestamps in y2106, since they
* all store the seconds in a 32-bit unsigned integer.
* If we create a version 4, that should have a 64-bit timestamp,
* either 64-bit seconds + 32-bit nanoseconds, or just 64-bit
* nanoseconds.
*/
switch (po->tp_version) {
case TPACKET_V1:
h.h1->tp_sec = ts.tv_sec;
h.h1->tp_usec = ts.tv_nsec / NSEC_PER_USEC;
break;
case TPACKET_V2:
h.h2->tp_sec = ts.tv_sec;
h.h2->tp_nsec = ts.tv_nsec;
break;
case TPACKET_V3:
h.h3->tp_sec = ts.tv_sec;
h.h3->tp_nsec = ts.tv_nsec;
break;
default:
WARN(1, "TPACKET version not supported.\n");
BUG();
}
/* one flush is safe, as both fields always lie on the same cacheline */
flush_dcache_page(pgv_to_page(&h.h1->tp_sec));
smp_wmb();
return ts_status;
}
static void *packet_lookup_frame(const struct packet_sock *po,
const struct packet_ring_buffer *rb,
unsigned int position,
int status)
{
unsigned int pg_vec_pos, frame_offset;
union tpacket_uhdr h;
pg_vec_pos = position / rb->frames_per_block;
frame_offset = position % rb->frames_per_block;
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
h.raw = rb->pg_vec[pg_vec_pos].buffer +
(frame_offset * rb->frame_size);
if (status != __packet_get_status(po, h.raw))
return NULL;
return h.raw;
}
static void *packet_current_frame(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
return packet_lookup_frame(po, rb, rb->head, status);
}
static void prb_del_retire_blk_timer(struct tpacket_kbdq_core *pkc)
{
del_timer_sync(&pkc->retire_blk_timer);
}
static void prb_shutdown_retire_blk_timer(struct packet_sock *po,
struct sk_buff_head *rb_queue)
{
struct tpacket_kbdq_core *pkc;
pkc = GET_PBDQC_FROM_RB(&po->rx_ring);
spin_lock_bh(&rb_queue->lock);
pkc->delete_blk_timer = 1;
spin_unlock_bh(&rb_queue->lock);
prb_del_retire_blk_timer(pkc);
}
static void prb_setup_retire_blk_timer(struct packet_sock *po)
{
struct tpacket_kbdq_core *pkc;
pkc = GET_PBDQC_FROM_RB(&po->rx_ring);
timer_setup(&pkc->retire_blk_timer, prb_retire_rx_blk_timer_expired,
0);
pkc->retire_blk_timer.expires = jiffies;
}
static int prb_calc_retire_blk_tmo(struct packet_sock *po,
int blk_size_in_bytes)
{
struct net_device *dev;
unsigned int mbits, div;
struct ethtool_link_ksettings ecmd;
int err;
rtnl_lock();
dev = __dev_get_by_index(sock_net(&po->sk), po->ifindex);
if (unlikely(!dev)) {
rtnl_unlock();
return DEFAULT_PRB_RETIRE_TOV;
}
err = __ethtool_get_link_ksettings(dev, &ecmd);
rtnl_unlock();
if (err)
return DEFAULT_PRB_RETIRE_TOV;
/* If the link speed is so slow you don't really
* need to worry about perf anyways
*/
if (ecmd.base.speed < SPEED_1000 ||
ecmd.base.speed == SPEED_UNKNOWN)
return DEFAULT_PRB_RETIRE_TOV;
div = ecmd.base.speed / 1000;
mbits = (blk_size_in_bytes * 8) / (1024 * 1024);
if (div)
mbits /= div;
if (div)
return mbits + 1;
return mbits;
}
static void prb_init_ft_ops(struct tpacket_kbdq_core *p1,
union tpacket_req_u *req_u)
{
p1->feature_req_word = req_u->req3.tp_feature_req_word;
}
static void init_prb_bdqc(struct packet_sock *po,
struct packet_ring_buffer *rb,
struct pgv *pg_vec,
union tpacket_req_u *req_u)
{
struct tpacket_kbdq_core *p1 = GET_PBDQC_FROM_RB(rb);
struct tpacket_block_desc *pbd;
memset(p1, 0x0, sizeof(*p1));
p1->knxt_seq_num = 1;
p1->pkbdq = pg_vec;
pbd = (struct tpacket_block_desc *)pg_vec[0].buffer;
p1->pkblk_start = pg_vec[0].buffer;
p1->kblk_size = req_u->req3.tp_block_size;
p1->knum_blocks = req_u->req3.tp_block_nr;
p1->hdrlen = po->tp_hdrlen;
p1->version = po->tp_version;
p1->last_kactive_blk_num = 0;
po->stats.stats3.tp_freeze_q_cnt = 0;
if (req_u->req3.tp_retire_blk_tov)
p1->retire_blk_tov = req_u->req3.tp_retire_blk_tov;
else
p1->retire_blk_tov = prb_calc_retire_blk_tmo(po,
req_u->req3.tp_block_size);
p1->tov_in_jiffies = msecs_to_jiffies(p1->retire_blk_tov);
p1->blk_sizeof_priv = req_u->req3.tp_sizeof_priv;
rwlock_init(&p1->blk_fill_in_prog_lock);
p1->max_frame_len = p1->kblk_size - BLK_PLUS_PRIV(p1->blk_sizeof_priv);
prb_init_ft_ops(p1, req_u);
prb_setup_retire_blk_timer(po);
prb_open_block(p1, pbd);
}
/* Do NOT update the last_blk_num first.
* Assumes sk_buff_head lock is held.
*/
static void _prb_refresh_rx_retire_blk_timer(struct tpacket_kbdq_core *pkc)
{
mod_timer(&pkc->retire_blk_timer,
jiffies + pkc->tov_in_jiffies);
pkc->last_kactive_blk_num = pkc->kactive_blk_num;
}
/*
* Timer logic:
* 1) We refresh the timer only when we open a block.
* By doing this we don't waste cycles refreshing the timer
* on packet-by-packet basis.
*
* With a 1MB block-size, on a 1Gbps line, it will take
* i) ~8 ms to fill a block + ii) memcpy etc.
* In this cut we are not accounting for the memcpy time.
*
* So, if the user sets the 'tmo' to 10ms then the timer
* will never fire while the block is still getting filled
* (which is what we want). However, the user could choose
* to close a block early and that's fine.
*
* But when the timer does fire, we check whether or not to refresh it.
* Since the tmo granularity is in msecs, it is not too expensive
* to refresh the timer, lets say every '8' msecs.
* Either the user can set the 'tmo' or we can derive it based on
* a) line-speed and b) block-size.
* prb_calc_retire_blk_tmo() calculates the tmo.
*
*/
static void prb_retire_rx_blk_timer_expired(struct timer_list *t)
{
struct packet_sock *po =
from_timer(po, t, rx_ring.prb_bdqc.retire_blk_timer);
struct tpacket_kbdq_core *pkc = GET_PBDQC_FROM_RB(&po->rx_ring);
unsigned int frozen;
struct tpacket_block_desc *pbd;
spin_lock(&po->sk.sk_receive_queue.lock);
frozen = prb_queue_frozen(pkc);
pbd = GET_CURR_PBLOCK_DESC_FROM_CORE(pkc);
if (unlikely(pkc->delete_blk_timer))
goto out;
/* We only need to plug the race when the block is partially filled.
* tpacket_rcv:
* lock(); increment BLOCK_NUM_PKTS; unlock()
* copy_bits() is in progress ...
* timer fires on other cpu:
* we can't retire the current block because copy_bits
* is in progress.
*
*/
if (BLOCK_NUM_PKTS(pbd)) {
/* Waiting for skb_copy_bits to finish... */
write_lock(&pkc->blk_fill_in_prog_lock);
write_unlock(&pkc->blk_fill_in_prog_lock);
}
if (pkc->last_kactive_blk_num == pkc->kactive_blk_num) {
if (!frozen) {
if (!BLOCK_NUM_PKTS(pbd)) {
/* An empty block. Just refresh the timer. */
goto refresh_timer;
}
prb_retire_current_block(pkc, po, TP_STATUS_BLK_TMO);
if (!prb_dispatch_next_block(pkc, po))
goto refresh_timer;
else
goto out;
} else {
/* Case 1. Queue was frozen because user-space was
* lagging behind.
*/
if (prb_curr_blk_in_use(pbd)) {
/*
* Ok, user-space is still behind.
* So just refresh the timer.
*/
goto refresh_timer;
} else {
/* Case 2. queue was frozen,user-space caught up,
* now the link went idle && the timer fired.
* We don't have a block to close.So we open this
* block and restart the timer.
* opening a block thaws the queue,restarts timer
* Thawing/timer-refresh is a side effect.
*/
prb_open_block(pkc, pbd);
goto out;
}
}
}
refresh_timer:
_prb_refresh_rx_retire_blk_timer(pkc);
out:
spin_unlock(&po->sk.sk_receive_queue.lock);
}
static void prb_flush_block(struct tpacket_kbdq_core *pkc1,
struct tpacket_block_desc *pbd1, __u32 status)
{
/* Flush everything minus the block header */
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE == 1
u8 *start, *end;
start = (u8 *)pbd1;
/* Skip the block header(we know header WILL fit in 4K) */
start += PAGE_SIZE;
end = (u8 *)PAGE_ALIGN((unsigned long)pkc1->pkblk_end);
for (; start < end; start += PAGE_SIZE)
flush_dcache_page(pgv_to_page(start));
smp_wmb();
#endif
/* Now update the block status. */
BLOCK_STATUS(pbd1) = status;
/* Flush the block header */
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE == 1
start = (u8 *)pbd1;
flush_dcache_page(pgv_to_page(start));
smp_wmb();
#endif
}
/*
* Side effect:
*
* 1) flush the block
* 2) Increment active_blk_num
*
* Note:We DONT refresh the timer on purpose.
* Because almost always the next block will be opened.
*/
static void prb_close_block(struct tpacket_kbdq_core *pkc1,
struct tpacket_block_desc *pbd1,
struct packet_sock *po, unsigned int stat)
{
__u32 status = TP_STATUS_USER | stat;
struct tpacket3_hdr *last_pkt;
struct tpacket_hdr_v1 *h1 = &pbd1->hdr.bh1;
struct sock *sk = &po->sk;
if (atomic_read(&po->tp_drops))
status |= TP_STATUS_LOSING;
last_pkt = (struct tpacket3_hdr *)pkc1->prev;
last_pkt->tp_next_offset = 0;
/* Get the ts of the last pkt */
if (BLOCK_NUM_PKTS(pbd1)) {
h1->ts_last_pkt.ts_sec = last_pkt->tp_sec;
h1->ts_last_pkt.ts_nsec = last_pkt->tp_nsec;
} else {
/* Ok, we tmo'd - so get the current time.
*
* It shouldn't really happen as we don't close empty
* blocks. See prb_retire_rx_blk_timer_expired().
*/
struct timespec64 ts;
ktime_get_real_ts64(&ts);
h1->ts_last_pkt.ts_sec = ts.tv_sec;
h1->ts_last_pkt.ts_nsec = ts.tv_nsec;
}
smp_wmb();
/* Flush the block */
prb_flush_block(pkc1, pbd1, status);
sk->sk_data_ready(sk);
pkc1->kactive_blk_num = GET_NEXT_PRB_BLK_NUM(pkc1);
}
static void prb_thaw_queue(struct tpacket_kbdq_core *pkc)
{
pkc->reset_pending_on_curr_blk = 0;
}
/*
* Side effect of opening a block:
*
* 1) prb_queue is thawed.
* 2) retire_blk_timer is refreshed.
*
*/
static void prb_open_block(struct tpacket_kbdq_core *pkc1,
struct tpacket_block_desc *pbd1)
{
struct timespec64 ts;
struct tpacket_hdr_v1 *h1 = &pbd1->hdr.bh1;
smp_rmb();
/* We could have just memset this but we will lose the
* flexibility of making the priv area sticky
*/
BLOCK_SNUM(pbd1) = pkc1->knxt_seq_num++;
BLOCK_NUM_PKTS(pbd1) = 0;
BLOCK_LEN(pbd1) = BLK_PLUS_PRIV(pkc1->blk_sizeof_priv);
ktime_get_real_ts64(&ts);
h1->ts_first_pkt.ts_sec = ts.tv_sec;
h1->ts_first_pkt.ts_nsec = ts.tv_nsec;
pkc1->pkblk_start = (char *)pbd1;
pkc1->nxt_offset = pkc1->pkblk_start + BLK_PLUS_PRIV(pkc1->blk_sizeof_priv);
BLOCK_O2FP(pbd1) = (__u32)BLK_PLUS_PRIV(pkc1->blk_sizeof_priv);
BLOCK_O2PRIV(pbd1) = BLK_HDR_LEN;
pbd1->version = pkc1->version;
pkc1->prev = pkc1->nxt_offset;
pkc1->pkblk_end = pkc1->pkblk_start + pkc1->kblk_size;
prb_thaw_queue(pkc1);
_prb_refresh_rx_retire_blk_timer(pkc1);
smp_wmb();
}
/*
* Queue freeze logic:
* 1) Assume tp_block_nr = 8 blocks.
* 2) At time 't0', user opens Rx ring.
* 3) Some time past 't0', kernel starts filling blocks starting from 0 .. 7
* 4) user-space is either sleeping or processing block '0'.
* 5) tpacket_rcv is currently filling block '7', since there is no space left,
* it will close block-7,loop around and try to fill block '0'.
* call-flow:
* __packet_lookup_frame_in_block
* prb_retire_current_block()
* prb_dispatch_next_block()
* |->(BLOCK_STATUS == USER) evaluates to true
* 5.1) Since block-0 is currently in-use, we just freeze the queue.
* 6) Now there are two cases:
* 6.1) Link goes idle right after the queue is frozen.
* But remember, the last open_block() refreshed the timer.
* When this timer expires,it will refresh itself so that we can
* re-open block-0 in near future.
* 6.2) Link is busy and keeps on receiving packets. This is a simple
* case and __packet_lookup_frame_in_block will check if block-0
* is free and can now be re-used.
*/
static void prb_freeze_queue(struct tpacket_kbdq_core *pkc,
struct packet_sock *po)
{
pkc->reset_pending_on_curr_blk = 1;
po->stats.stats3.tp_freeze_q_cnt++;
}
#define TOTAL_PKT_LEN_INCL_ALIGN(length) (ALIGN((length), V3_ALIGNMENT))
/*
* If the next block is free then we will dispatch it
* and return a good offset.
* Else, we will freeze the queue.
* So, caller must check the return value.
*/
static void *prb_dispatch_next_block(struct tpacket_kbdq_core *pkc,
struct packet_sock *po)
{
struct tpacket_block_desc *pbd;
smp_rmb();
/* 1. Get current block num */
pbd = GET_CURR_PBLOCK_DESC_FROM_CORE(pkc);
/* 2. If this block is currently in_use then freeze the queue */
if (TP_STATUS_USER & BLOCK_STATUS(pbd)) {
prb_freeze_queue(pkc, po);
return NULL;
}
/*
* 3.
* open this block and return the offset where the first packet
* needs to get stored.
*/
prb_open_block(pkc, pbd);
return (void *)pkc->nxt_offset;
}
static void prb_retire_current_block(struct tpacket_kbdq_core *pkc,
struct packet_sock *po, unsigned int status)
{
struct tpacket_block_desc *pbd = GET_CURR_PBLOCK_DESC_FROM_CORE(pkc);
/* retire/close the current block */
if (likely(TP_STATUS_KERNEL == BLOCK_STATUS(pbd))) {
/*
* Plug the case where copy_bits() is in progress on
* cpu-0 and tpacket_rcv() got invoked on cpu-1, didn't
* have space to copy the pkt in the current block and
* called prb_retire_current_block()
*
* We don't need to worry about the TMO case because
* the timer-handler already handled this case.
*/
if (!(status & TP_STATUS_BLK_TMO)) {
/* Waiting for skb_copy_bits to finish... */
write_lock(&pkc->blk_fill_in_prog_lock);
write_unlock(&pkc->blk_fill_in_prog_lock);
}
prb_close_block(pkc, pbd, po, status);
return;
}
}
static int prb_curr_blk_in_use(struct tpacket_block_desc *pbd)
{
return TP_STATUS_USER & BLOCK_STATUS(pbd);
}
static int prb_queue_frozen(struct tpacket_kbdq_core *pkc)
{
return pkc->reset_pending_on_curr_blk;
}
static void prb_clear_blk_fill_status(struct packet_ring_buffer *rb)
__releases(&pkc->blk_fill_in_prog_lock)
{
struct tpacket_kbdq_core *pkc = GET_PBDQC_FROM_RB(rb);
read_unlock(&pkc->blk_fill_in_prog_lock);
}
static void prb_fill_rxhash(struct tpacket_kbdq_core *pkc,
struct tpacket3_hdr *ppd)
{
ppd->hv1.tp_rxhash = skb_get_hash(pkc->skb);
}
static void prb_clear_rxhash(struct tpacket_kbdq_core *pkc,
struct tpacket3_hdr *ppd)
{
ppd->hv1.tp_rxhash = 0;
}
static void prb_fill_vlan_info(struct tpacket_kbdq_core *pkc,
struct tpacket3_hdr *ppd)
{
if (skb_vlan_tag_present(pkc->skb)) {
ppd->hv1.tp_vlan_tci = skb_vlan_tag_get(pkc->skb);
ppd->hv1.tp_vlan_tpid = ntohs(pkc->skb->vlan_proto);
ppd->tp_status = TP_STATUS_VLAN_VALID | TP_STATUS_VLAN_TPID_VALID;
} else {
ppd->hv1.tp_vlan_tci = 0;
ppd->hv1.tp_vlan_tpid = 0;
ppd->tp_status = TP_STATUS_AVAILABLE;
}
}
static void prb_run_all_ft_ops(struct tpacket_kbdq_core *pkc,
struct tpacket3_hdr *ppd)
{
ppd->hv1.tp_padding = 0;
prb_fill_vlan_info(pkc, ppd);
if (pkc->feature_req_word & TP_FT_REQ_FILL_RXHASH)
prb_fill_rxhash(pkc, ppd);
else
prb_clear_rxhash(pkc, ppd);
}
static void prb_fill_curr_block(char *curr,
struct tpacket_kbdq_core *pkc,
struct tpacket_block_desc *pbd,
unsigned int len)
__acquires(&pkc->blk_fill_in_prog_lock)
{
struct tpacket3_hdr *ppd;
ppd = (struct tpacket3_hdr *)curr;
ppd->tp_next_offset = TOTAL_PKT_LEN_INCL_ALIGN(len);
pkc->prev = curr;
pkc->nxt_offset += TOTAL_PKT_LEN_INCL_ALIGN(len);
BLOCK_LEN(pbd) += TOTAL_PKT_LEN_INCL_ALIGN(len);
BLOCK_NUM_PKTS(pbd) += 1;
read_lock(&pkc->blk_fill_in_prog_lock);
prb_run_all_ft_ops(pkc, ppd);
}
/* Assumes caller has the sk->rx_queue.lock */
static void *__packet_lookup_frame_in_block(struct packet_sock *po,
struct sk_buff *skb,
unsigned int len
)
{
struct tpacket_kbdq_core *pkc;
struct tpacket_block_desc *pbd;
char *curr, *end;
pkc = GET_PBDQC_FROM_RB(&po->rx_ring);
pbd = GET_CURR_PBLOCK_DESC_FROM_CORE(pkc);
/* Queue is frozen when user space is lagging behind */
if (prb_queue_frozen(pkc)) {
/*
* Check if that last block which caused the queue to freeze,
* is still in_use by user-space.
*/
if (prb_curr_blk_in_use(pbd)) {
/* Can't record this packet */
return NULL;
} else {
/*
* Ok, the block was released by user-space.
* Now let's open that block.
* opening a block also thaws the queue.
* Thawing is a side effect.
*/
prb_open_block(pkc, pbd);
}
}
smp_mb();
curr = pkc->nxt_offset;
pkc->skb = skb;
end = (char *)pbd + pkc->kblk_size;
/* first try the current block */
if (curr+TOTAL_PKT_LEN_INCL_ALIGN(len) < end) {
prb_fill_curr_block(curr, pkc, pbd, len);
return (void *)curr;
}
/* Ok, close the current block */
prb_retire_current_block(pkc, po, 0);
/* Now, try to dispatch the next block */
curr = (char *)prb_dispatch_next_block(pkc, po);
if (curr) {
pbd = GET_CURR_PBLOCK_DESC_FROM_CORE(pkc);
prb_fill_curr_block(curr, pkc, pbd, len);
return (void *)curr;
}
/*
* No free blocks are available.user_space hasn't caught up yet.
* Queue was just frozen and now this packet will get dropped.
*/
return NULL;
}
static void *packet_current_rx_frame(struct packet_sock *po,
struct sk_buff *skb,
int status, unsigned int len)
{
char *curr = NULL;
switch (po->tp_version) {
case TPACKET_V1:
case TPACKET_V2:
curr = packet_lookup_frame(po, &po->rx_ring,
po->rx_ring.head, status);
return curr;
case TPACKET_V3:
return __packet_lookup_frame_in_block(po, skb, len);
default:
WARN(1, "TPACKET version not supported\n");
BUG();
return NULL;
}
}
static void *prb_lookup_block(const struct packet_sock *po,
const struct packet_ring_buffer *rb,
unsigned int idx,
int status)
{
struct tpacket_kbdq_core *pkc = GET_PBDQC_FROM_RB(rb);
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
struct tpacket_block_desc *pbd = GET_PBLOCK_DESC(pkc, idx);
if (status != BLOCK_STATUS(pbd))
return NULL;
return pbd;
}
static int prb_previous_blk_num(struct packet_ring_buffer *rb)
{
unsigned int prev;
if (rb->prb_bdqc.kactive_blk_num)
prev = rb->prb_bdqc.kactive_blk_num-1;
else
prev = rb->prb_bdqc.knum_blocks-1;
return prev;
}
/* Assumes caller has held the rx_queue.lock */
static void *__prb_previous_block(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
unsigned int previous = prb_previous_blk_num(rb);
return prb_lookup_block(po, rb, previous, status);
}
static void *packet_previous_rx_frame(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
if (po->tp_version <= TPACKET_V2)
return packet_previous_frame(po, rb, status);
return __prb_previous_block(po, rb, status);
}
static void packet_increment_rx_head(struct packet_sock *po,
struct packet_ring_buffer *rb)
{
switch (po->tp_version) {
case TPACKET_V1:
case TPACKET_V2:
return packet_increment_head(rb);
case TPACKET_V3:
default:
WARN(1, "TPACKET version not supported.\n");
BUG();
return;
}
}
static void *packet_previous_frame(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
unsigned int previous = rb->head ? rb->head - 1 : rb->frame_max;
return packet_lookup_frame(po, rb, previous, status);
}
static void packet_increment_head(struct packet_ring_buffer *buff)
{
buff->head = buff->head != buff->frame_max ? buff->head+1 : 0;
}
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
static void packet_inc_pending(struct packet_ring_buffer *rb)
{
this_cpu_inc(*rb->pending_refcnt);
}
static void packet_dec_pending(struct packet_ring_buffer *rb)
{
this_cpu_dec(*rb->pending_refcnt);
}
static unsigned int packet_read_pending(const struct packet_ring_buffer *rb)
{
unsigned int refcnt = 0;
int cpu;
/* We don't use pending refcount in rx_ring. */
if (rb->pending_refcnt == NULL)
return 0;
for_each_possible_cpu(cpu)
refcnt += *per_cpu_ptr(rb->pending_refcnt, cpu);
return refcnt;
}
static int packet_alloc_pending(struct packet_sock *po)
{
po->rx_ring.pending_refcnt = NULL;
po->tx_ring.pending_refcnt = alloc_percpu(unsigned int);
if (unlikely(po->tx_ring.pending_refcnt == NULL))
return -ENOBUFS;
return 0;
}
static void packet_free_pending(struct packet_sock *po)
{
free_percpu(po->tx_ring.pending_refcnt);
}
#define ROOM_POW_OFF 2
#define ROOM_NONE 0x0
#define ROOM_LOW 0x1
#define ROOM_NORMAL 0x2
static bool __tpacket_has_room(const struct packet_sock *po, int pow_off)
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
{
int idx, len;
len = READ_ONCE(po->rx_ring.frame_max) + 1;
idx = READ_ONCE(po->rx_ring.head);
if (pow_off)
idx += len >> pow_off;
if (idx >= len)
idx -= len;
return packet_lookup_frame(po, &po->rx_ring, idx, TP_STATUS_KERNEL);
}
static bool __tpacket_v3_has_room(const struct packet_sock *po, int pow_off)
{
int idx, len;
len = READ_ONCE(po->rx_ring.prb_bdqc.knum_blocks);
idx = READ_ONCE(po->rx_ring.prb_bdqc.kactive_blk_num);
if (pow_off)
idx += len >> pow_off;
if (idx >= len)
idx -= len;
return prb_lookup_block(po, &po->rx_ring, idx, TP_STATUS_KERNEL);
}
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
static int __packet_rcv_has_room(const struct packet_sock *po,
const struct sk_buff *skb)
{
const struct sock *sk = &po->sk;
int ret = ROOM_NONE;
if (po->prot_hook.func != tpacket_rcv) {
int rcvbuf = READ_ONCE(sk->sk_rcvbuf);
int avail = rcvbuf - atomic_read(&sk->sk_rmem_alloc)
- (skb ? skb->truesize : 0);
if (avail > (rcvbuf >> ROOM_POW_OFF))
return ROOM_NORMAL;
else if (avail > 0)
return ROOM_LOW;
else
return ROOM_NONE;
}
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
if (po->tp_version == TPACKET_V3) {
if (__tpacket_v3_has_room(po, ROOM_POW_OFF))
ret = ROOM_NORMAL;
else if (__tpacket_v3_has_room(po, 0))
ret = ROOM_LOW;
} else {
if (__tpacket_has_room(po, ROOM_POW_OFF))
ret = ROOM_NORMAL;
else if (__tpacket_has_room(po, 0))
ret = ROOM_LOW;
}
packet: rollover lock contention avoidance Rollover has to call packet_rcv_has_room on sockets in the fanout group to find a socket to migrate to. This operation is expensive especially if the packet sockets use rings, when a lock has to be acquired. Avoid pounding on the lock by all sockets by temporarily marking a socket as "under memory pressure" when such pressure is detected. While set, only the socket owner may call packet_rcv_has_room on the socket. Once it detects normal conditions, it clears the flag. The socket is not used as a victim by any other socket in the meantime. Under reasonably balanced load, each socket writer frequently calls packet_rcv_has_room and clears its own pressure field. As a backup for when the socket is rarely written to, also clear the flag on reading (packet_recvmsg, packet_poll) if this can be done cheaply (i.e., without calling packet_rcv_has_room). This is only for edge cases. Tested: Ran bench_rollover: a process with 8 sockets in a single fanout group, each pinned to a single cpu that receives one nic recv interrupt. RPS and RFS are disabled. The benchmark uses packet rx_ring, which has to take a lock when determining whether a socket has room. Sent 3.5 Mpps of UDP traffic with sufficient entropy to spread uniformly across the packet sockets (and inserted an iptables rule to drop in PREROUTING to avoid protocol stack processing). Without this patch, all sockets try to migrate traffic to neighbors, causing lock contention when searching for a non- empty neighbor. The lock is the top 9 entries. perf record -a -g sleep 5 - 17.82% bench_rollover [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock - 99.00% spin_lock + 81.77% packet_rcv_has_room.isra.41 + 18.23% tpacket_rcv + 0.84% packet_rcv_has_room.isra.41 + 5.20% ksoftirqd/6 [kernel.kallsyms] [k] _raw_spin_lock + 5.15% ksoftirqd/1 [kernel.kallsyms] [k] _raw_spin_lock + 5.14% ksoftirqd/2 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/7 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/5 [kernel.kallsyms] [k] _raw_spin_lock + 5.10% ksoftirqd/4 [kernel.kallsyms] [k] _raw_spin_lock + 4.66% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_lock + 4.45% ksoftirqd/3 [kernel.kallsyms] [k] _raw_spin_lock + 1.55% bench_rollover [kernel.kallsyms] [k] packet_rcv_has_room.isra.41 On net-next with this patch, this lock contention is no longer a top entry. Most time is spent in the actual read function. Next up are other locks: + 15.52% bench_rollover bench_rollover [.] reader + 4.68% swapper [kernel.kallsyms] [k] memcpy_erms + 2.77% swapper [kernel.kallsyms] [k] packet_lookup_frame.isra.51 + 2.56% ksoftirqd/1 [kernel.kallsyms] [k] memcpy_erms + 2.16% swapper [kernel.kallsyms] [k] tpacket_rcv + 1.93% swapper [kernel.kallsyms] [k] mlx4_en_process_rx_cq Looking closer at the remaining _raw_spin_lock, the cost of probing in rollover is now comparable to the cost of taking the lock later in tpacket_rcv. - 1.51% swapper [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock + 33.41% packet_rcv_has_room + 28.15% tpacket_rcv + 19.54% enqueue_to_backlog + 6.45% __free_pages_ok + 2.78% packet_rcv_fanout + 2.13% fanout_demux_rollover + 2.01% netif_receive_skb_internal Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 23:56:48 +08:00
return ret;
}
static int packet_rcv_has_room(struct packet_sock *po, struct sk_buff *skb)
{
int pressure, ret;
packet: rollover lock contention avoidance Rollover has to call packet_rcv_has_room on sockets in the fanout group to find a socket to migrate to. This operation is expensive especially if the packet sockets use rings, when a lock has to be acquired. Avoid pounding on the lock by all sockets by temporarily marking a socket as "under memory pressure" when such pressure is detected. While set, only the socket owner may call packet_rcv_has_room on the socket. Once it detects normal conditions, it clears the flag. The socket is not used as a victim by any other socket in the meantime. Under reasonably balanced load, each socket writer frequently calls packet_rcv_has_room and clears its own pressure field. As a backup for when the socket is rarely written to, also clear the flag on reading (packet_recvmsg, packet_poll) if this can be done cheaply (i.e., without calling packet_rcv_has_room). This is only for edge cases. Tested: Ran bench_rollover: a process with 8 sockets in a single fanout group, each pinned to a single cpu that receives one nic recv interrupt. RPS and RFS are disabled. The benchmark uses packet rx_ring, which has to take a lock when determining whether a socket has room. Sent 3.5 Mpps of UDP traffic with sufficient entropy to spread uniformly across the packet sockets (and inserted an iptables rule to drop in PREROUTING to avoid protocol stack processing). Without this patch, all sockets try to migrate traffic to neighbors, causing lock contention when searching for a non- empty neighbor. The lock is the top 9 entries. perf record -a -g sleep 5 - 17.82% bench_rollover [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock - 99.00% spin_lock + 81.77% packet_rcv_has_room.isra.41 + 18.23% tpacket_rcv + 0.84% packet_rcv_has_room.isra.41 + 5.20% ksoftirqd/6 [kernel.kallsyms] [k] _raw_spin_lock + 5.15% ksoftirqd/1 [kernel.kallsyms] [k] _raw_spin_lock + 5.14% ksoftirqd/2 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/7 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/5 [kernel.kallsyms] [k] _raw_spin_lock + 5.10% ksoftirqd/4 [kernel.kallsyms] [k] _raw_spin_lock + 4.66% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_lock + 4.45% ksoftirqd/3 [kernel.kallsyms] [k] _raw_spin_lock + 1.55% bench_rollover [kernel.kallsyms] [k] packet_rcv_has_room.isra.41 On net-next with this patch, this lock contention is no longer a top entry. Most time is spent in the actual read function. Next up are other locks: + 15.52% bench_rollover bench_rollover [.] reader + 4.68% swapper [kernel.kallsyms] [k] memcpy_erms + 2.77% swapper [kernel.kallsyms] [k] packet_lookup_frame.isra.51 + 2.56% ksoftirqd/1 [kernel.kallsyms] [k] memcpy_erms + 2.16% swapper [kernel.kallsyms] [k] tpacket_rcv + 1.93% swapper [kernel.kallsyms] [k] mlx4_en_process_rx_cq Looking closer at the remaining _raw_spin_lock, the cost of probing in rollover is now comparable to the cost of taking the lock later in tpacket_rcv. - 1.51% swapper [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock + 33.41% packet_rcv_has_room + 28.15% tpacket_rcv + 19.54% enqueue_to_backlog + 6.45% __free_pages_ok + 2.78% packet_rcv_fanout + 2.13% fanout_demux_rollover + 2.01% netif_receive_skb_internal Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 23:56:48 +08:00
ret = __packet_rcv_has_room(po, skb);
pressure = ret != ROOM_NORMAL;
if (READ_ONCE(po->pressure) != pressure)
WRITE_ONCE(po->pressure, pressure);
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
return ret;
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
}
static void packet_rcv_try_clear_pressure(struct packet_sock *po)
{
if (READ_ONCE(po->pressure) &&
__packet_rcv_has_room(po, NULL) == ROOM_NORMAL)
WRITE_ONCE(po->pressure, 0);
}
static void packet_sock_destruct(struct sock *sk)
{
skb_queue_purge(&sk->sk_error_queue);
WARN_ON(atomic_read(&sk->sk_rmem_alloc));
WARN_ON(refcount_read(&sk->sk_wmem_alloc));
if (!sock_flag(sk, SOCK_DEAD)) {
pr_err("Attempt to release alive packet socket: %p\n", sk);
return;
}
sk_refcnt_debug_dec(sk);
}
static bool fanout_flow_is_huge(struct packet_sock *po, struct sk_buff *skb)
{
packet: fix data-race in fanout_flow_is_huge() KCSAN reported the following data-race [1] Adding a couple of READ_ONCE()/WRITE_ONCE() should silence it. Since the report hinted about multiple cpus using the history concurrently, I added a test avoiding writing on it if the victim slot already contains the desired value. [1] BUG: KCSAN: data-race in fanout_demux_rollover / fanout_demux_rollover read to 0xffff8880b01786cc of 4 bytes by task 18921 on cpu 1: fanout_flow_is_huge net/packet/af_packet.c:1303 [inline] fanout_demux_rollover+0x33e/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880b01786cc of 4 bytes by task 18922 on cpu 0: fanout_flow_is_huge net/packet/af_packet.c:1306 [inline] fanout_demux_rollover+0x3a4/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 18922 Comm: syz-executor.3 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 3b3a5b0aab5b ("packet: rollover huge flows before small flows") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 21:07:46 +08:00
u32 *history = po->rollover->history;
u32 victim, rxhash;
int i, count = 0;
rxhash = skb_get_hash(skb);
for (i = 0; i < ROLLOVER_HLEN; i++)
packet: fix data-race in fanout_flow_is_huge() KCSAN reported the following data-race [1] Adding a couple of READ_ONCE()/WRITE_ONCE() should silence it. Since the report hinted about multiple cpus using the history concurrently, I added a test avoiding writing on it if the victim slot already contains the desired value. [1] BUG: KCSAN: data-race in fanout_demux_rollover / fanout_demux_rollover read to 0xffff8880b01786cc of 4 bytes by task 18921 on cpu 1: fanout_flow_is_huge net/packet/af_packet.c:1303 [inline] fanout_demux_rollover+0x33e/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880b01786cc of 4 bytes by task 18922 on cpu 0: fanout_flow_is_huge net/packet/af_packet.c:1306 [inline] fanout_demux_rollover+0x3a4/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 18922 Comm: syz-executor.3 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 3b3a5b0aab5b ("packet: rollover huge flows before small flows") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 21:07:46 +08:00
if (READ_ONCE(history[i]) == rxhash)
count++;
packet: fix data-race in fanout_flow_is_huge() KCSAN reported the following data-race [1] Adding a couple of READ_ONCE()/WRITE_ONCE() should silence it. Since the report hinted about multiple cpus using the history concurrently, I added a test avoiding writing on it if the victim slot already contains the desired value. [1] BUG: KCSAN: data-race in fanout_demux_rollover / fanout_demux_rollover read to 0xffff8880b01786cc of 4 bytes by task 18921 on cpu 1: fanout_flow_is_huge net/packet/af_packet.c:1303 [inline] fanout_demux_rollover+0x33e/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880b01786cc of 4 bytes by task 18922 on cpu 0: fanout_flow_is_huge net/packet/af_packet.c:1306 [inline] fanout_demux_rollover+0x3a4/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 18922 Comm: syz-executor.3 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 3b3a5b0aab5b ("packet: rollover huge flows before small flows") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 21:07:46 +08:00
victim = prandom_u32() % ROLLOVER_HLEN;
/* Avoid dirtying the cache line if possible */
if (READ_ONCE(history[victim]) != rxhash)
WRITE_ONCE(history[victim], rxhash);
return count > (ROLLOVER_HLEN >> 1);
}
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
static unsigned int fanout_demux_hash(struct packet_fanout *f,
struct sk_buff *skb,
unsigned int num)
{
return reciprocal_scale(__skb_get_hash_symmetric(skb), num);
}
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
static unsigned int fanout_demux_lb(struct packet_fanout *f,
struct sk_buff *skb,
unsigned int num)
{
unsigned int val = atomic_inc_return(&f->rr_cur);
return val % num;
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
}
static unsigned int fanout_demux_cpu(struct packet_fanout *f,
struct sk_buff *skb,
unsigned int num)
{
return smp_processor_id() % num;
}
static unsigned int fanout_demux_rnd(struct packet_fanout *f,
struct sk_buff *skb,
unsigned int num)
{
return prandom_u32_max(num);
}
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
static unsigned int fanout_demux_rollover(struct packet_fanout *f,
struct sk_buff *skb,
unsigned int idx, bool try_self,
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
unsigned int num)
{
struct packet_sock *po, *po_next, *po_skip = NULL;
unsigned int i, j, room = ROOM_NONE;
po = pkt_sk(rcu_dereference(f->arr[idx]));
if (try_self) {
room = packet_rcv_has_room(po, skb);
if (room == ROOM_NORMAL ||
(room == ROOM_LOW && !fanout_flow_is_huge(po, skb)))
return idx;
po_skip = po;
}
i = j = min_t(int, po->rollover->sock, num - 1);
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
do {
po_next = pkt_sk(rcu_dereference(f->arr[i]));
if (po_next != po_skip && !READ_ONCE(po_next->pressure) &&
packet: rollover lock contention avoidance Rollover has to call packet_rcv_has_room on sockets in the fanout group to find a socket to migrate to. This operation is expensive especially if the packet sockets use rings, when a lock has to be acquired. Avoid pounding on the lock by all sockets by temporarily marking a socket as "under memory pressure" when such pressure is detected. While set, only the socket owner may call packet_rcv_has_room on the socket. Once it detects normal conditions, it clears the flag. The socket is not used as a victim by any other socket in the meantime. Under reasonably balanced load, each socket writer frequently calls packet_rcv_has_room and clears its own pressure field. As a backup for when the socket is rarely written to, also clear the flag on reading (packet_recvmsg, packet_poll) if this can be done cheaply (i.e., without calling packet_rcv_has_room). This is only for edge cases. Tested: Ran bench_rollover: a process with 8 sockets in a single fanout group, each pinned to a single cpu that receives one nic recv interrupt. RPS and RFS are disabled. The benchmark uses packet rx_ring, which has to take a lock when determining whether a socket has room. Sent 3.5 Mpps of UDP traffic with sufficient entropy to spread uniformly across the packet sockets (and inserted an iptables rule to drop in PREROUTING to avoid protocol stack processing). Without this patch, all sockets try to migrate traffic to neighbors, causing lock contention when searching for a non- empty neighbor. The lock is the top 9 entries. perf record -a -g sleep 5 - 17.82% bench_rollover [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock - 99.00% spin_lock + 81.77% packet_rcv_has_room.isra.41 + 18.23% tpacket_rcv + 0.84% packet_rcv_has_room.isra.41 + 5.20% ksoftirqd/6 [kernel.kallsyms] [k] _raw_spin_lock + 5.15% ksoftirqd/1 [kernel.kallsyms] [k] _raw_spin_lock + 5.14% ksoftirqd/2 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/7 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/5 [kernel.kallsyms] [k] _raw_spin_lock + 5.10% ksoftirqd/4 [kernel.kallsyms] [k] _raw_spin_lock + 4.66% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_lock + 4.45% ksoftirqd/3 [kernel.kallsyms] [k] _raw_spin_lock + 1.55% bench_rollover [kernel.kallsyms] [k] packet_rcv_has_room.isra.41 On net-next with this patch, this lock contention is no longer a top entry. Most time is spent in the actual read function. Next up are other locks: + 15.52% bench_rollover bench_rollover [.] reader + 4.68% swapper [kernel.kallsyms] [k] memcpy_erms + 2.77% swapper [kernel.kallsyms] [k] packet_lookup_frame.isra.51 + 2.56% ksoftirqd/1 [kernel.kallsyms] [k] memcpy_erms + 2.16% swapper [kernel.kallsyms] [k] tpacket_rcv + 1.93% swapper [kernel.kallsyms] [k] mlx4_en_process_rx_cq Looking closer at the remaining _raw_spin_lock, the cost of probing in rollover is now comparable to the cost of taking the lock later in tpacket_rcv. - 1.51% swapper [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock + 33.41% packet_rcv_has_room + 28.15% tpacket_rcv + 19.54% enqueue_to_backlog + 6.45% __free_pages_ok + 2.78% packet_rcv_fanout + 2.13% fanout_demux_rollover + 2.01% netif_receive_skb_internal Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 23:56:48 +08:00
packet_rcv_has_room(po_next, skb) == ROOM_NORMAL) {
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
if (i != j)
po->rollover->sock = i;
atomic_long_inc(&po->rollover->num);
if (room == ROOM_LOW)
atomic_long_inc(&po->rollover->num_huge);
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
return i;
}
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
if (++i == num)
i = 0;
} while (i != j);
atomic_long_inc(&po->rollover->num_failed);
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
return idx;
}
static unsigned int fanout_demux_qm(struct packet_fanout *f,
struct sk_buff *skb,
unsigned int num)
{
return skb_get_queue_mapping(skb) % num;
}
static unsigned int fanout_demux_bpf(struct packet_fanout *f,
struct sk_buff *skb,
unsigned int num)
{
struct bpf_prog *prog;
unsigned int ret = 0;
rcu_read_lock();
prog = rcu_dereference(f->bpf_prog);
if (prog)
ret = bpf_prog_run_clear_cb(prog, skb) % num;
rcu_read_unlock();
return ret;
}
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
static bool fanout_has_flag(struct packet_fanout *f, u16 flag)
{
return f->flags & (flag >> 8);
}
static int packet_rcv_fanout(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct packet_fanout *f = pt->af_packet_priv;
unsigned int num = READ_ONCE(f->num_members);
struct net *net = read_pnet(&f->net);
struct packet_sock *po;
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
unsigned int idx;
if (!net_eq(dev_net(dev), net) || !num) {
kfree_skb(skb);
return 0;
}
if (fanout_has_flag(f, PACKET_FANOUT_FLAG_DEFRAG)) {
skb = ip_check_defrag(net, skb, IP_DEFRAG_AF_PACKET);
if (!skb)
return 0;
}
switch (f->type) {
case PACKET_FANOUT_HASH:
default:
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
idx = fanout_demux_hash(f, skb, num);
break;
case PACKET_FANOUT_LB:
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
idx = fanout_demux_lb(f, skb, num);
break;
case PACKET_FANOUT_CPU:
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
idx = fanout_demux_cpu(f, skb, num);
break;
case PACKET_FANOUT_RND:
idx = fanout_demux_rnd(f, skb, num);
break;
case PACKET_FANOUT_QM:
idx = fanout_demux_qm(f, skb, num);
break;
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
case PACKET_FANOUT_ROLLOVER:
idx = fanout_demux_rollover(f, skb, 0, false, num);
break;
case PACKET_FANOUT_CBPF:
case PACKET_FANOUT_EBPF:
idx = fanout_demux_bpf(f, skb, num);
break;
}
if (fanout_has_flag(f, PACKET_FANOUT_FLAG_ROLLOVER))
idx = fanout_demux_rollover(f, skb, idx, true, num);
po = pkt_sk(rcu_dereference(f->arr[idx]));
return po->prot_hook.func(skb, dev, &po->prot_hook, orig_dev);
}
DEFINE_MUTEX(fanout_mutex);
EXPORT_SYMBOL_GPL(fanout_mutex);
static LIST_HEAD(fanout_list);
static u16 fanout_next_id;
static void __fanout_link(struct sock *sk, struct packet_sock *po)
{
struct packet_fanout *f = po->fanout;
spin_lock(&f->lock);
rcu_assign_pointer(f->arr[f->num_members], sk);
smp_wmb();
f->num_members++;
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
if (f->num_members == 1)
dev_add_pack(&f->prot_hook);
spin_unlock(&f->lock);
}
static void __fanout_unlink(struct sock *sk, struct packet_sock *po)
{
struct packet_fanout *f = po->fanout;
int i;
spin_lock(&f->lock);
for (i = 0; i < f->num_members; i++) {
if (rcu_dereference_protected(f->arr[i],
lockdep_is_held(&f->lock)) == sk)
break;
}
BUG_ON(i >= f->num_members);
rcu_assign_pointer(f->arr[i],
rcu_dereference_protected(f->arr[f->num_members - 1],
lockdep_is_held(&f->lock)));
f->num_members--;
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
if (f->num_members == 0)
__dev_remove_pack(&f->prot_hook);
spin_unlock(&f->lock);
}
static bool match_fanout_group(struct packet_type *ptype, struct sock *sk)
{
if (sk->sk_family != PF_PACKET)
return false;
return ptype->af_packet_priv == pkt_sk(sk)->fanout;
}
static void fanout_init_data(struct packet_fanout *f)
{
switch (f->type) {
case PACKET_FANOUT_LB:
atomic_set(&f->rr_cur, 0);
break;
case PACKET_FANOUT_CBPF:
case PACKET_FANOUT_EBPF:
RCU_INIT_POINTER(f->bpf_prog, NULL);
break;
}
}
static void __fanout_set_data_bpf(struct packet_fanout *f, struct bpf_prog *new)
{
struct bpf_prog *old;
spin_lock(&f->lock);
old = rcu_dereference_protected(f->bpf_prog, lockdep_is_held(&f->lock));
rcu_assign_pointer(f->bpf_prog, new);
spin_unlock(&f->lock);
if (old) {
synchronize_net();
bpf_prog_destroy(old);
}
}
static int fanout_set_data_cbpf(struct packet_sock *po, sockptr_t data,
unsigned int len)
{
struct bpf_prog *new;
struct sock_fprog fprog;
int ret;
if (sock_flag(&po->sk, SOCK_FILTER_LOCKED))
return -EPERM;
ret = copy_bpf_fprog_from_user(&fprog, data, len);
if (ret)
return ret;
ret = bpf_prog_create_from_user(&new, &fprog, NULL, false);
if (ret)
return ret;
__fanout_set_data_bpf(po->fanout, new);
return 0;
}
static int fanout_set_data_ebpf(struct packet_sock *po, sockptr_t data,
unsigned int len)
{
struct bpf_prog *new;
u32 fd;
if (sock_flag(&po->sk, SOCK_FILTER_LOCKED))
return -EPERM;
if (len != sizeof(fd))
return -EINVAL;
if (copy_from_sockptr(&fd, data, len))
return -EFAULT;
new = bpf_prog_get_type(fd, BPF_PROG_TYPE_SOCKET_FILTER);
if (IS_ERR(new))
return PTR_ERR(new);
__fanout_set_data_bpf(po->fanout, new);
return 0;
}
static int fanout_set_data(struct packet_sock *po, sockptr_t data,
unsigned int len)
{
switch (po->fanout->type) {
case PACKET_FANOUT_CBPF:
return fanout_set_data_cbpf(po, data, len);
case PACKET_FANOUT_EBPF:
return fanout_set_data_ebpf(po, data, len);
default:
return -EINVAL;
}
}
static void fanout_release_data(struct packet_fanout *f)
{
switch (f->type) {
case PACKET_FANOUT_CBPF:
case PACKET_FANOUT_EBPF:
__fanout_set_data_bpf(f, NULL);
}
}
static bool __fanout_id_is_free(struct sock *sk, u16 candidate_id)
{
struct packet_fanout *f;
list_for_each_entry(f, &fanout_list, list) {
if (f->id == candidate_id &&
read_pnet(&f->net) == sock_net(sk)) {
return false;
}
}
return true;
}
static bool fanout_find_new_id(struct sock *sk, u16 *new_id)
{
u16 id = fanout_next_id;
do {
if (__fanout_id_is_free(sk, id)) {
*new_id = id;
fanout_next_id = id + 1;
return true;
}
id++;
} while (id != fanout_next_id);
return false;
}
static int fanout_add(struct sock *sk, struct fanout_args *args)
{
struct packet_rollover *rollover = NULL;
struct packet_sock *po = pkt_sk(sk);
u16 type_flags = args->type_flags;
struct packet_fanout *f, *match;
u8 type = type_flags & 0xff;
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
u8 flags = type_flags >> 8;
u16 id = args->id;
int err;
switch (type) {
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
case PACKET_FANOUT_ROLLOVER:
if (type_flags & PACKET_FANOUT_FLAG_ROLLOVER)
return -EINVAL;
break;
case PACKET_FANOUT_HASH:
case PACKET_FANOUT_LB:
case PACKET_FANOUT_CPU:
case PACKET_FANOUT_RND:
case PACKET_FANOUT_QM:
case PACKET_FANOUT_CBPF:
case PACKET_FANOUT_EBPF:
break;
default:
return -EINVAL;
}
mutex_lock(&fanout_mutex);
err = -EALREADY;
if (po->fanout)
goto out;
if (type == PACKET_FANOUT_ROLLOVER ||
(type_flags & PACKET_FANOUT_FLAG_ROLLOVER)) {
err = -ENOMEM;
rollover = kzalloc(sizeof(*rollover), GFP_KERNEL);
if (!rollover)
goto out;
atomic_long_set(&rollover->num, 0);
atomic_long_set(&rollover->num_huge, 0);
atomic_long_set(&rollover->num_failed, 0);
}
if (type_flags & PACKET_FANOUT_FLAG_UNIQUEID) {
if (id != 0) {
err = -EINVAL;
goto out;
}
if (!fanout_find_new_id(sk, &id)) {
err = -ENOMEM;
goto out;
}
/* ephemeral flag for the first socket in the group: drop it */
flags &= ~(PACKET_FANOUT_FLAG_UNIQUEID >> 8);
}
match = NULL;
list_for_each_entry(f, &fanout_list, list) {
if (f->id == id &&
read_pnet(&f->net) == sock_net(sk)) {
match = f;
break;
}
}
err = -EINVAL;
if (match) {
if (match->flags != flags)
goto out;
if (args->max_num_members &&
args->max_num_members != match->max_num_members)
goto out;
} else {
if (args->max_num_members > PACKET_FANOUT_MAX)
goto out;
if (!args->max_num_members)
/* legacy PACKET_FANOUT_MAX */
args->max_num_members = 256;
err = -ENOMEM;
match = kvzalloc(struct_size(match, arr, args->max_num_members),
GFP_KERNEL);
if (!match)
goto out;
write_pnet(&match->net, sock_net(sk));
match->id = id;
match->type = type;
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
match->flags = flags;
INIT_LIST_HEAD(&match->list);
spin_lock_init(&match->lock);
refcount_set(&match->sk_ref, 0);
fanout_init_data(match);
match->prot_hook.type = po->prot_hook.type;
match->prot_hook.dev = po->prot_hook.dev;
match->prot_hook.func = packet_rcv_fanout;
match->prot_hook.af_packet_priv = match;
match->prot_hook.id_match = match_fanout_group;
match->max_num_members = args->max_num_members;
list_add(&match->list, &fanout_list);
}
err = -EINVAL;
spin_lock(&po->bind_lock);
if (po->running &&
match->type == type &&
match->prot_hook.type == po->prot_hook.type &&
match->prot_hook.dev == po->prot_hook.dev) {
err = -ENOSPC;
if (refcount_read(&match->sk_ref) < match->max_num_members) {
__dev_remove_pack(&po->prot_hook);
po->fanout = match;
packet: fix crash in fanout_demux_rollover() syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28 23:44:29 +08:00
po->rollover = rollover;
rollover = NULL;
refcount_set(&match->sk_ref, refcount_read(&match->sk_ref) + 1);
__fanout_link(sk, po);
err = 0;
}
}
spin_unlock(&po->bind_lock);
if (err && !refcount_read(&match->sk_ref)) {
list_del(&match->list);
kvfree(match);
}
out:
packet: fix crash in fanout_demux_rollover() syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28 23:44:29 +08:00
kfree(rollover);
mutex_unlock(&fanout_mutex);
return err;
}
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
/* If pkt_sk(sk)->fanout->sk_ref is zero, this function removes
* pkt_sk(sk)->fanout from fanout_list and returns pkt_sk(sk)->fanout.
* It is the responsibility of the caller to call fanout_release_data() and
* free the returned packet_fanout (after synchronize_net())
*/
static struct packet_fanout *fanout_release(struct sock *sk)
{
struct packet_sock *po = pkt_sk(sk);
struct packet_fanout *f;
mutex_lock(&fanout_mutex);
f = po->fanout;
if (f) {
po->fanout = NULL;
if (refcount_dec_and_test(&f->sk_ref))
list_del(&f->list);
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
else
f = NULL;
}
mutex_unlock(&fanout_mutex);
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
return f;
}
static bool packet_extra_vlan_len_allowed(const struct net_device *dev,
struct sk_buff *skb)
{
/* Earlier code assumed this would be a VLAN pkt, double-check
* this now that we have the actual packet in hand. We can only
* do this check on Ethernet devices.
*/
if (unlikely(dev->type != ARPHRD_ETHER))
return false;
skb_reset_mac_header(skb);
return likely(eth_hdr(skb)->h_proto == htons(ETH_P_8021Q));
}
static const struct proto_ops packet_ops;
static const struct proto_ops packet_ops_spkt;
static int packet_rcv_spkt(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct sock *sk;
struct sockaddr_pkt *spkt;
/*
* When we registered the protocol we saved the socket in the data
* field for just this event.
*/
sk = pt->af_packet_priv;
/*
* Yank back the headers [hope the device set this
* right or kerboom...]
*
* Incoming packets have ll header pulled,
* push it back.
*
* For outgoing ones skb->data == skb_mac_header(skb)
* so that this procedure is noop.
*/
if (skb->pkt_type == PACKET_LOOPBACK)
goto out;
if (!net_eq(dev_net(dev), sock_net(sk)))
goto out;
skb = skb_share_check(skb, GFP_ATOMIC);
if (skb == NULL)
goto oom;
/* drop any routing info */
skb_dst_drop(skb);
/* drop conntrack reference */
nf_reset_ct(skb);
spkt = &PACKET_SKB_CB(skb)->sa.pkt;
skb_push(skb, skb->data - skb_mac_header(skb));
/*
* The SOCK_PACKET socket receives _all_ frames.
*/
spkt->spkt_family = dev->type;
strlcpy(spkt->spkt_device, dev->name, sizeof(spkt->spkt_device));
spkt->spkt_protocol = skb->protocol;
/*
* Charge the memory to the socket. This is done specifically
* to prevent sockets using all the memory up.
*/
if (sock_queue_rcv_skb(sk, skb) == 0)
return 0;
out:
kfree_skb(skb);
oom:
return 0;
}
static void packet_parse_headers(struct sk_buff *skb, struct socket *sock)
{
if ((!skb->protocol || skb->protocol == htons(ETH_P_ALL)) &&
sock->type == SOCK_RAW) {
skb_reset_mac_header(skb);
skb->protocol = dev_parse_header_protocol(skb);
}
skb_probe_transport_header(skb);
}
/*
* Output a raw packet to a device layer. This bypasses all the other
* protocol layers and you must therefore supply it with a complete frame
*/
static int packet_sendmsg_spkt(struct socket *sock, struct msghdr *msg,
size_t len)
{
struct sock *sk = sock->sk;
DECLARE_SOCKADDR(struct sockaddr_pkt *, saddr, msg->msg_name);
struct sk_buff *skb = NULL;
struct net_device *dev;
struct sockcm_cookie sockc;
__be16 proto = 0;
int err;
int extra_len = 0;
/*
* Get and verify the address.
*/
if (saddr) {
if (msg->msg_namelen < sizeof(struct sockaddr))
return -EINVAL;
if (msg->msg_namelen == sizeof(struct sockaddr_pkt))
proto = saddr->spkt_protocol;
} else
return -ENOTCONN; /* SOCK_PACKET must be sent giving an address */
/*
* Find the device first to size check it
*/
saddr->spkt_device[sizeof(saddr->spkt_device) - 1] = 0;
retry:
rcu_read_lock();
dev = dev_get_by_name_rcu(sock_net(sk), saddr->spkt_device);
err = -ENODEV;
if (dev == NULL)
goto out_unlock;
err = -ENETDOWN;
if (!(dev->flags & IFF_UP))
goto out_unlock;
/*
* You may not queue a frame bigger than the mtu. This is the lowest level
* raw protocol and you must do your own fragmentation at this level.
*/
if (unlikely(sock_flag(sk, SOCK_NOFCS))) {
if (!netif_supports_nofcs(dev)) {
err = -EPROTONOSUPPORT;
goto out_unlock;
}
extra_len = 4; /* We're doing our own CRC */
}
err = -EMSGSIZE;
if (len > dev->mtu + dev->hard_header_len + VLAN_HLEN + extra_len)
goto out_unlock;
if (!skb) {
size_t reserved = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
unsigned int hhlen = dev->header_ops ? dev->hard_header_len : 0;
rcu_read_unlock();
skb = sock_wmalloc(sk, len + reserved + tlen, 0, GFP_KERNEL);
if (skb == NULL)
return -ENOBUFS;
/* FIXME: Save some space for broken drivers that write a hard
* header at transmission time by themselves. PPP is the notable
* one here. This should really be fixed at the driver level.
*/
skb_reserve(skb, reserved);
skb_reset_network_header(skb);
/* Try to align data part correctly */
if (hhlen) {
skb->data -= hhlen;
skb->tail -= hhlen;
if (len < hhlen)
skb_reset_network_header(skb);
}
err = memcpy_from_msg(skb_put(skb, len), msg, len);
if (err)
goto out_free;
goto retry;
}
if (!dev_validate_header(dev, skb->data, len)) {
err = -EINVAL;
goto out_unlock;
}
if (len > (dev->mtu + dev->hard_header_len + extra_len) &&
!packet_extra_vlan_len_allowed(dev, skb)) {
err = -EMSGSIZE;
goto out_unlock;
}
sockcm_init(&sockc, sk);
if (msg->msg_controllen) {
err = sock_cmsg_send(sk, msg, &sockc);
if (unlikely(err))
goto out_unlock;
}
skb->protocol = proto;
skb->dev = dev;
skb->priority = sk->sk_priority;
skb->mark = sk->sk_mark;
skb->tstamp = sockc.transmit_time;
skb_setup_tx_timestamp(skb, sockc.tsflags);
if (unlikely(extra_len == 4))
skb->no_fcs = 1;
packet_parse_headers(skb, sock);
dev_queue_xmit(skb);
rcu_read_unlock();
return len;
out_unlock:
rcu_read_unlock();
out_free:
kfree_skb(skb);
return err;
}
static unsigned int run_filter(struct sk_buff *skb,
const struct sock *sk,
unsigned int res)
{
struct sk_filter *filter;
rcu_read_lock();
filter = rcu_dereference(sk->sk_filter);
if (filter != NULL)
res = bpf_prog_run_clear_cb(filter->prog, skb);
rcu_read_unlock();
return res;
}
static int packet_rcv_vnet(struct msghdr *msg, const struct sk_buff *skb,
size_t *len)
{
struct virtio_net_hdr vnet_hdr;
if (*len < sizeof(vnet_hdr))
return -EINVAL;
*len -= sizeof(vnet_hdr);
if (virtio_net_hdr_from_skb(skb, &vnet_hdr, vio_le(), true, 0))
return -EINVAL;
return memcpy_to_msg(msg, (void *)&vnet_hdr, sizeof(vnet_hdr));
}
/*
* This function makes lazy skb cloning in hope that most of packets
* are discarded by BPF.
*
* Note tricky part: we DO mangle shared skb! skb->data, skb->len
* and skb->cb are mangled. It works because (and until) packets
* falling here are owned by current CPU. Output packets are cloned
* by dev_queue_xmit_nit(), input packets are processed by net_bh
* sequentially, so that if we return skb to original state on exit,
* we will not harm anyone.
*/
static int packet_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct sock *sk;
struct sockaddr_ll *sll;
struct packet_sock *po;
u8 *skb_head = skb->data;
int skb_len = skb->len;
unsigned int snaplen, res;
bool is_drop_n_account = false;
if (skb->pkt_type == PACKET_LOOPBACK)
goto drop;
sk = pt->af_packet_priv;
po = pkt_sk(sk);
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
skb->dev = dev;
2020-11-21 14:28:17 +08:00
if (dev_has_header(dev)) {
/* The device has an explicit notion of ll header,
* exported to higher levels.
*
* Otherwise, the device hides details of its frame
* structure, so that corresponding packet head is
* never delivered to user.
*/
if (sk->sk_type != SOCK_DGRAM)
skb_push(skb, skb->data - skb_mac_header(skb));
else if (skb->pkt_type == PACKET_OUTGOING) {
/* Special case: outgoing packets have ll header at head */
skb_pull(skb, skb_network_offset(skb));
}
}
snaplen = skb->len;
res = run_filter(skb, sk, snaplen);
if (!res)
goto drop_n_restore;
if (snaplen > res)
snaplen = res;
if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
goto drop_n_acct;
if (skb_shared(skb)) {
struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
if (nskb == NULL)
goto drop_n_acct;
if (skb_head != skb->data) {
skb->data = skb_head;
skb->len = skb_len;
}
consume_skb(skb);
skb = nskb;
}
sock_skb_cb_check_size(sizeof(*PACKET_SKB_CB(skb)) + MAX_ADDR_LEN - 8);
sll = &PACKET_SKB_CB(skb)->sa.ll;
sll->sll_hatype = dev->type;
sll->sll_pkttype = skb->pkt_type;
if (unlikely(po->origdev))
sll->sll_ifindex = orig_dev->ifindex;
else
sll->sll_ifindex = dev->ifindex;
sll->sll_halen = dev_parse_header(skb, sll->sll_addr);
/* sll->sll_family and sll->sll_protocol are set in packet_recvmsg().
* Use their space for storing the original skb length.
*/
PACKET_SKB_CB(skb)->sa.origlen = skb->len;
if (pskb_trim(skb, snaplen))
goto drop_n_acct;
skb_set_owner_r(skb, sk);
skb->dev = NULL;
skb_dst_drop(skb);
/* drop conntrack reference */
nf_reset_ct(skb);
spin_lock(&sk->sk_receive_queue.lock);
po->stats.stats1.tp_packets++;
sock_skb_set_dropcount(sk, skb);
__skb_queue_tail(&sk->sk_receive_queue, skb);
spin_unlock(&sk->sk_receive_queue.lock);
sk->sk_data_ready(sk);
return 0;
drop_n_acct:
is_drop_n_account = true;
atomic_inc(&po->tp_drops);
make PACKET_STATISTICS getsockopt report consistently between ring and non-ring This is a minor change. Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, ...) would return total and dropped packets since its last invocation. The introduction of socket queue overflow reporting [1] changed drop rate calculation in the normal packet socket path, but not when using a packet ring. As a result, the getsockopt now returns different statistics depending on the reception method used. With a ring, it still returns the count since the last call, as counts are incremented in tpacket_rcv and reset in getsockopt. Without a ring, it returns 0 if no drops occurred since the last getsockopt and the total drops over the lifespan of the socket otherwise. The culprit is this line in packet_rcv, executed on a drop: drop_n_acct: po->stats.tp_drops = atomic_inc_return(&sk->sk_drops); As it shows, the new drop number it taken from the socket drop counter, which is not reset at getsockopt. I put together a small example that demonstrates the issue [2]. It runs for 10 seconds and overflows the queue/ring on every odd second. The reported drop rates are: ring: 16, 0, 16, 0, 16, ... non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74. Note how the even ring counts monotonically increase. Because the getsockopt adds tp_drops to tp_packets, total counts are similarly reported cumulatively. Long story short, reinstating the original code, as the below patch does, fixes the issue at the cost of additional per-packet cycles. Another solution that does not introduce per-packet overhead is be to keep the current data path, record the value of sk_drops at getsockopt() at call N in a new field in struct packetsock and subtract that when reporting at call N+1. I'll be happy to code that, instead, it's just more messy. [1] http://patchwork.ozlabs.org/patch/35665/ [2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.c Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 18:38:28 +08:00
atomic_inc(&sk->sk_drops);
drop_n_restore:
if (skb_head != skb->data && skb_shared(skb)) {
skb->data = skb_head;
skb->len = skb_len;
}
drop:
if (!is_drop_n_account)
consume_skb(skb);
else
kfree_skb(skb);
return 0;
}
static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct sock *sk;
struct packet_sock *po;
struct sockaddr_ll *sll;
union tpacket_uhdr h;
u8 *skb_head = skb->data;
int skb_len = skb->len;
unsigned int snaplen, res;
unsigned long status = TP_STATUS_USER;
unsigned short macoff, hdrlen;
unsigned int netoff;
struct sk_buff *copy_skb = NULL;
struct timespec64 ts;
__u32 ts_status;
bool is_drop_n_account = false;
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
unsigned int slot_id = 0;
bool do_vnet = false;
/* struct tpacket{2,3}_hdr is aligned to a multiple of TPACKET_ALIGNMENT.
* We may add members to them until current aligned size without forcing
* userspace to call getsockopt(..., PACKET_HDRLEN, ...).
*/
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
if (skb->pkt_type == PACKET_LOOPBACK)
goto drop;
sk = pt->af_packet_priv;
po = pkt_sk(sk);
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
2020-11-21 14:28:17 +08:00
if (dev_has_header(dev)) {
if (sk->sk_type != SOCK_DGRAM)
skb_push(skb, skb->data - skb_mac_header(skb));
else if (skb->pkt_type == PACKET_OUTGOING) {
/* Special case: outgoing packets have ll header at head */
skb_pull(skb, skb_network_offset(skb));
}
}
snaplen = skb->len;
res = run_filter(skb, sk, snaplen);
if (!res)
goto drop_n_restore;
/* If we are flooded, just give up */
if (__packet_rcv_has_room(po, skb) == ROOM_NONE) {
atomic_inc(&po->tp_drops);
goto drop_n_restore;
}
if (skb->ip_summed == CHECKSUM_PARTIAL)
status |= TP_STATUS_CSUMNOTREADY;
else if (skb->pkt_type != PACKET_OUTGOING &&
(skb->ip_summed == CHECKSUM_COMPLETE ||
skb_csum_unnecessary(skb)))
status |= TP_STATUS_CSUM_VALID;
if (snaplen > res)
snaplen = res;
if (sk->sk_type == SOCK_DGRAM) {
macoff = netoff = TPACKET_ALIGN(po->tp_hdrlen) + 16 +
po->tp_reserve;
} else {
unsigned int maclen = skb_network_offset(skb);
netoff = TPACKET_ALIGN(po->tp_hdrlen +
(maclen < 16 ? 16 : maclen)) +
po->tp_reserve;
if (po->has_vnet_hdr) {
netoff += sizeof(struct virtio_net_hdr);
do_vnet = true;
}
macoff = netoff - maclen;
}
if (netoff > USHRT_MAX) {
atomic_inc(&po->tp_drops);
goto drop_n_restore;
}
if (po->tp_version <= TPACKET_V2) {
if (macoff + snaplen > po->rx_ring.frame_size) {
if (po->copy_thresh &&
atomic_read(&sk->sk_rmem_alloc) < sk->sk_rcvbuf) {
if (skb_shared(skb)) {
copy_skb = skb_clone(skb, GFP_ATOMIC);
} else {
copy_skb = skb_get(skb);
skb_head = skb->data;
}
if (copy_skb)
skb_set_owner_r(copy_skb, sk);
}
snaplen = po->rx_ring.frame_size - macoff;
if ((int)snaplen < 0) {
snaplen = 0;
do_vnet = false;
}
}
} else if (unlikely(macoff + snaplen >
GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len)) {
u32 nval;
nval = GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len - macoff;
pr_err_once("tpacket_rcv: packet too big, clamped from %u to %u. macoff=%u\n",
snaplen, nval, macoff);
snaplen = nval;
if (unlikely((int)snaplen < 0)) {
snaplen = 0;
macoff = GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len;
do_vnet = false;
}
}
spin_lock(&sk->sk_receive_queue.lock);
h.raw = packet_current_rx_frame(po, skb,
TP_STATUS_KERNEL, (macoff+snaplen));
if (!h.raw)
goto drop_n_account;
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
if (po->tp_version <= TPACKET_V2) {
slot_id = po->rx_ring.head;
if (test_bit(slot_id, po->rx_ring.rx_owner_map))
goto drop_n_account;
__set_bit(slot_id, po->rx_ring.rx_owner_map);
}
if (do_vnet &&
virtio_net_hdr_from_skb(skb, h.raw + macoff -
sizeof(struct virtio_net_hdr),
vio_le(), true, 0)) {
if (po->tp_version == TPACKET_V3)
prb_clear_blk_fill_status(&po->rx_ring);
goto drop_n_account;
}
if (po->tp_version <= TPACKET_V2) {
packet_increment_rx_head(po, &po->rx_ring);
/*
* LOSING will be reported till you read the stats,
* because it's COR - Clear On Read.
* Anyways, moving it for V1/V2 only as V3 doesn't need this
* at packet level.
*/
if (atomic_read(&po->tp_drops))
status |= TP_STATUS_LOSING;
}
net/packet: fix use-after-free We should put copy_skb in receive_queue only after a successful call to virtio_net_hdr_from_skb(). syzbot report : BUG: KASAN: use-after-free in __skb_unlink include/linux/skbuff.h:1843 [inline] BUG: KASAN: use-after-free in __skb_dequeue include/linux/skbuff.h:1863 [inline] BUG: KASAN: use-after-free in skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815 Read of size 8 at addr ffff8801b044ecc0 by task syz-executor217/4553 CPU: 0 PID: 4553 Comm: syz-executor217 Not tainted 4.18.0-rc1+ #111 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __skb_unlink include/linux/skbuff.h:1843 [inline] __skb_dequeue include/linux/skbuff.h:1863 [inline] skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815 skb_queue_purge+0x26/0x40 net/core/skbuff.c:2852 packet_set_ring+0x675/0x1da0 net/packet/af_packet.c:4331 packet_release+0x630/0xd90 net/packet/af_packet.c:2991 __sock_release+0xd7/0x260 net/socket.c:603 sock_close+0x19/0x20 net/socket.c:1186 __fput+0x35b/0x8b0 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1ec/0x2a0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x1b08/0x2750 kernel/exit.c:865 do_group_exit+0x177/0x440 kernel/exit.c:968 __do_sys_exit_group kernel/exit.c:979 [inline] __se_sys_exit_group kernel/exit.c:977 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:977 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4448e9 Code: Bad RIP value. RSP: 002b:00007ffd5f777ca8 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004448e9 RDX: 00000000004448e9 RSI: 000000000000fcfb RDI: 0000000000000001 RBP: 00000000006cf018 R08: 00007ffd0000a45b R09: 0000000000000000 R10: 00007ffd5f777e48 R11: 0000000000000202 R12: 00000000004021f0 R13: 0000000000402280 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 4553: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 skb_clone+0x1f5/0x500 net/core/skbuff.c:1282 tpacket_rcv+0x28f7/0x3200 net/packet/af_packet.c:2221 deliver_skb net/core/dev.c:1925 [inline] deliver_ptype_list_skb net/core/dev.c:1940 [inline] __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009 call_write_iter include/linux/fs.h:1795 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6c6/0x9f0 fs/read_write.c:487 vfs_write+0x1f8/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4553: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582 __kfree_skb net/core/skbuff.c:642 [inline] kfree_skb+0x1a5/0x580 net/core/skbuff.c:659 tpacket_rcv+0x189e/0x3200 net/packet/af_packet.c:2385 deliver_skb net/core/dev.c:1925 [inline] deliver_ptype_list_skb net/core/dev.c:1940 [inline] __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009 call_write_iter include/linux/fs.h:1795 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6c6/0x9f0 fs/read_write.c:487 vfs_write+0x1f8/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801b044ecc0 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 0 bytes inside of 232-byte region [ffff8801b044ecc0, ffff8801b044eda8) The buggy address belongs to the page: page:ffffea0006c11380 count:1 mapcount:0 mapping:ffff8801d9be96c0 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006c17988 ffff8801d9bec248 ffff8801d9be96c0 raw: 0000000000000000 ffff8801b044e040 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b044eb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801b044ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff8801b044ec80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8801b044ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b044ed80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc Fixes: 58d19b19cd99 ("packet: vnet_hdr support for tpacket_rcv") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22 05:16:02 +08:00
po->stats.stats1.tp_packets++;
if (copy_skb) {
status |= TP_STATUS_COPY;
__skb_queue_tail(&sk->sk_receive_queue, copy_skb);
}
spin_unlock(&sk->sk_receive_queue.lock);
skb_copy_bits(skb, 0, h.raw + macoff, snaplen);
/* Always timestamp; prefer an existing software timestamp taken
* closer to the time of capture.
*/
ts_status = tpacket_get_timestamp(skb, &ts,
po->tp_tstamp | SOF_TIMESTAMPING_SOFTWARE);
if (!ts_status)
ktime_get_real_ts64(&ts);
status |= ts_status;
switch (po->tp_version) {
case TPACKET_V1:
h.h1->tp_len = skb->len;
h.h1->tp_snaplen = snaplen;
h.h1->tp_mac = macoff;
h.h1->tp_net = netoff;
h.h1->tp_sec = ts.tv_sec;
h.h1->tp_usec = ts.tv_nsec / NSEC_PER_USEC;
hdrlen = sizeof(*h.h1);
break;
case TPACKET_V2:
h.h2->tp_len = skb->len;
h.h2->tp_snaplen = snaplen;
h.h2->tp_mac = macoff;
h.h2->tp_net = netoff;
h.h2->tp_sec = ts.tv_sec;
h.h2->tp_nsec = ts.tv_nsec;
if (skb_vlan_tag_present(skb)) {
h.h2->tp_vlan_tci = skb_vlan_tag_get(skb);
h.h2->tp_vlan_tpid = ntohs(skb->vlan_proto);
status |= TP_STATUS_VLAN_VALID | TP_STATUS_VLAN_TPID_VALID;
} else {
h.h2->tp_vlan_tci = 0;
h.h2->tp_vlan_tpid = 0;
}
memset(h.h2->tp_padding, 0, sizeof(h.h2->tp_padding));
hdrlen = sizeof(*h.h2);
break;
case TPACKET_V3:
/* tp_nxt_offset,vlan are already populated above.
* So DONT clear those fields here
*/
h.h3->tp_status |= status;
h.h3->tp_len = skb->len;
h.h3->tp_snaplen = snaplen;
h.h3->tp_mac = macoff;
h.h3->tp_net = netoff;
h.h3->tp_sec = ts.tv_sec;
h.h3->tp_nsec = ts.tv_nsec;
memset(h.h3->tp_padding, 0, sizeof(h.h3->tp_padding));
hdrlen = sizeof(*h.h3);
break;
default:
BUG();
}
sll = h.raw + TPACKET_ALIGN(hdrlen);
sll->sll_halen = dev_parse_header(skb, sll->sll_addr);
sll->sll_family = AF_PACKET;
sll->sll_hatype = dev->type;
sll->sll_protocol = skb->protocol;
sll->sll_pkttype = skb->pkt_type;
if (unlikely(po->origdev))
sll->sll_ifindex = orig_dev->ifindex;
else
sll->sll_ifindex = dev->ifindex;
smp_mb();
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE == 1
if (po->tp_version <= TPACKET_V2) {
u8 *start, *end;
end = (u8 *) PAGE_ALIGN((unsigned long) h.raw +
macoff + snaplen);
for (start = h.raw; start < end; start += PAGE_SIZE)
flush_dcache_page(pgv_to_page(start));
}
smp_wmb();
#endif
if (po->tp_version <= TPACKET_V2) {
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
spin_lock(&sk->sk_receive_queue.lock);
__packet_set_status(po, h.raw, status);
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
__clear_bit(slot_id, po->rx_ring.rx_owner_map);
spin_unlock(&sk->sk_receive_queue.lock);
sk->sk_data_ready(sk);
} else if (po->tp_version == TPACKET_V3) {
prb_clear_blk_fill_status(&po->rx_ring);
}
drop_n_restore:
if (skb_head != skb->data && skb_shared(skb)) {
skb->data = skb_head;
skb->len = skb_len;
}
drop:
if (!is_drop_n_account)
consume_skb(skb);
else
kfree_skb(skb);
return 0;
drop_n_account:
spin_unlock(&sk->sk_receive_queue.lock);
atomic_inc(&po->tp_drops);
is_drop_n_account = true;
sk->sk_data_ready(sk);
kfree_skb(copy_skb);
goto drop_n_restore;
}
static void tpacket_destruct_skb(struct sk_buff *skb)
{
struct packet_sock *po = pkt_sk(skb->sk);
if (likely(po->tx_ring.pg_vec)) {
void *ph;
__u32 ts;
packet: copy user buffers before orphan or clone tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21 02:00:18 +08:00
ph = skb_zcopy_get_nouarg(skb);
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
packet_dec_pending(&po->tx_ring);
ts = __packet_set_timestamp(po, ph, skb);
__packet_set_status(po, ph, TP_STATUS_AVAILABLE | ts);
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:57:49 +08:00
if (!packet_read_pending(&po->tx_ring))
complete(&po->skb_completion);
}
sock_wfree(skb);
}
static int __packet_snd_vnet_parse(struct virtio_net_hdr *vnet_hdr, size_t len)
{
if ((vnet_hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) &&
(__virtio16_to_cpu(vio_le(), vnet_hdr->csum_start) +
__virtio16_to_cpu(vio_le(), vnet_hdr->csum_offset) + 2 >
__virtio16_to_cpu(vio_le(), vnet_hdr->hdr_len)))
vnet_hdr->hdr_len = __cpu_to_virtio16(vio_le(),
__virtio16_to_cpu(vio_le(), vnet_hdr->csum_start) +
__virtio16_to_cpu(vio_le(), vnet_hdr->csum_offset) + 2);
if (__virtio16_to_cpu(vio_le(), vnet_hdr->hdr_len) > len)
return -EINVAL;
return 0;
}
static int packet_snd_vnet_parse(struct msghdr *msg, size_t *len,
struct virtio_net_hdr *vnet_hdr)
{
if (*len < sizeof(*vnet_hdr))
return -EINVAL;
*len -= sizeof(*vnet_hdr);
if (!copy_from_iter_full(vnet_hdr, sizeof(*vnet_hdr), &msg->msg_iter))
return -EFAULT;
return __packet_snd_vnet_parse(vnet_hdr, *len);
}
static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff *skb,
void *frame, struct net_device *dev, void *data, int tp_len,
__be16 proto, unsigned char *addr, int hlen, int copylen,
const struct sockcm_cookie *sockc)
{
union tpacket_uhdr ph;
int to_write, offset, len, nr_frags, len_max;
struct socket *sock = po->sk.sk_socket;
struct page *page;
int err;
ph.raw = frame;
skb->protocol = proto;
skb->dev = dev;
skb->priority = po->sk.sk_priority;
skb->mark = po->sk.sk_mark;
skb->tstamp = sockc->transmit_time;
skb_setup_tx_timestamp(skb, sockc->tsflags);
packet: copy user buffers before orphan or clone tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21 02:00:18 +08:00
skb_zcopy_set_nouarg(skb, ph.raw);
skb_reserve(skb, hlen);
skb_reset_network_header(skb);
to_write = tp_len;
if (sock->type == SOCK_DGRAM) {
err = dev_hard_header(skb, dev, ntohs(proto), addr,
NULL, tp_len);
if (unlikely(err < 0))
return -EINVAL;
} else if (copylen) {
int hdrlen = min_t(int, copylen, tp_len);
skb_push(skb, dev->hard_header_len);
skb_put(skb, copylen - dev->hard_header_len);
err = skb_store_bits(skb, 0, data, hdrlen);
if (unlikely(err))
return err;
if (!dev_validate_header(dev, skb->data, hdrlen))
return -EINVAL;
data += hdrlen;
to_write -= hdrlen;
}
offset = offset_in_page(data);
len_max = PAGE_SIZE - offset;
len = ((to_write > len_max) ? len_max : to_write);
skb->data_len = to_write;
skb->len += to_write;
skb->truesize += to_write;
refcount_add(to_write, &po->sk.sk_wmem_alloc);
while (likely(to_write)) {
nr_frags = skb_shinfo(skb)->nr_frags;
if (unlikely(nr_frags >= MAX_SKB_FRAGS)) {
pr_err("Packet exceed the number of skb frags(%lu)\n",
MAX_SKB_FRAGS);
return -EFAULT;
}
page = pgv_to_page(data);
data += len;
flush_dcache_page(page);
get_page(page);
skb_fill_page_desc(skb, nr_frags, page, offset, len);
to_write -= len;
offset = 0;
len_max = PAGE_SIZE;
len = ((to_write > len_max) ? len_max : to_write);
}
packet_parse_headers(skb, sock);
return tp_len;
}
static int tpacket_parse_header(struct packet_sock *po, void *frame,
int size_max, void **data)
{
union tpacket_uhdr ph;
int tp_len, off;
ph.raw = frame;
switch (po->tp_version) {
case TPACKET_V3:
if (ph.h3->tp_next_offset != 0) {
pr_warn_once("variable sized slot not supported");
return -EINVAL;
}
tp_len = ph.h3->tp_len;
break;
case TPACKET_V2:
tp_len = ph.h2->tp_len;
break;
default:
tp_len = ph.h1->tp_len;
break;
}
if (unlikely(tp_len > size_max)) {
pr_err("packet size is too long (%d > %d)\n", tp_len, size_max);
return -EMSGSIZE;
}
if (unlikely(po->tp_tx_has_off)) {
int off_min, off_max;
off_min = po->tp_hdrlen - sizeof(struct sockaddr_ll);
off_max = po->tx_ring.frame_size - tp_len;
if (po->sk.sk_type == SOCK_DGRAM) {
switch (po->tp_version) {
case TPACKET_V3:
off = ph.h3->tp_net;
break;
case TPACKET_V2:
off = ph.h2->tp_net;
break;
default:
off = ph.h1->tp_net;
break;
}
} else {
switch (po->tp_version) {
case TPACKET_V3:
off = ph.h3->tp_mac;
break;
case TPACKET_V2:
off = ph.h2->tp_mac;
break;
default:
off = ph.h1->tp_mac;
break;
}
}
if (unlikely((off < off_min) || (off_max < off)))
return -EINVAL;
} else {
off = po->tp_hdrlen - sizeof(struct sockaddr_ll);
}
*data = frame + off;
return tp_len;
}
static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
{
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:57:49 +08:00
struct sk_buff *skb = NULL;
struct net_device *dev;
struct virtio_net_hdr *vnet_hdr = NULL;
struct sockcm_cookie sockc;
__be16 proto;
int err, reserve = 0;
void *ph;
DECLARE_SOCKADDR(struct sockaddr_ll *, saddr, msg->msg_name);
bool need_wait = !(msg->msg_flags & MSG_DONTWAIT);
unsigned char *addr = NULL;
int tp_len, size_max;
void *data;
int len_sum = 0;
int status = TP_STATUS_AVAILABLE;
int hlen, tlen, copylen = 0;
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:57:49 +08:00
long timeo = 0;
mutex_lock(&po->pg_vec_lock);
net/packet: fix race in tpacket_snd() packet_sendmsg() checks tx_ring.pg_vec to decide if it must call tpacket_snd(). Problem is that the check is lockless, meaning another thread can issue a concurrent setsockopt(PACKET_TX_RING ) to flip tx_ring.pg_vec back to NULL. Given that tpacket_snd() grabs pg_vec_lock mutex, we can perform the check again to solve the race. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474 Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00 RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50 R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000 R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000 FS: 00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: packet_current_frame net/packet/af_packet.c:487 [inline] tpacket_snd net/packet/af_packet.c:2667 [inline] packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-14 17:11:57 +08:00
/* packet_sendmsg() check on tx_ring.pg_vec was lockless,
* we need to confirm it under protection of pg_vec_lock.
*/
if (unlikely(!po->tx_ring.pg_vec)) {
err = -EBUSY;
goto out;
}
if (likely(saddr == NULL)) {
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
dev = packet_cached_dev_get(po);
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
proto = READ_ONCE(po->num);
} else {
err = -EINVAL;
if (msg->msg_namelen < sizeof(struct sockaddr_ll))
goto out;
if (msg->msg_namelen < (saddr->sll_halen
+ offsetof(struct sockaddr_ll,
sll_addr)))
goto out;
proto = saddr->sll_protocol;
dev = dev_get_by_index(sock_net(&po->sk), saddr->sll_ifindex);
if (po->sk.sk_socket->type == SOCK_DGRAM) {
if (dev && msg->msg_namelen < dev->addr_len +
offsetof(struct sockaddr_ll, sll_addr))
goto out_put;
addr = saddr->sll_addr;
}
}
err = -ENXIO;
if (unlikely(dev == NULL))
goto out;
err = -ENETDOWN;
if (unlikely(!(dev->flags & IFF_UP)))
goto out_put;
sockcm_init(&sockc, &po->sk);
if (msg->msg_controllen) {
err = sock_cmsg_send(&po->sk, msg, &sockc);
if (unlikely(err))
goto out_put;
}
if (po->sk.sk_socket->type == SOCK_RAW)
reserve = dev->hard_header_len;
size_max = po->tx_ring.frame_size
- (po->tp_hdrlen - sizeof(struct sockaddr_ll));
if ((size_max > dev->mtu + reserve + VLAN_HLEN) && !po->has_vnet_hdr)
size_max = dev->mtu + reserve + VLAN_HLEN;
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:57:49 +08:00
reinit_completion(&po->skb_completion);
do {
ph = packet_current_frame(po, &po->tx_ring,
TP_STATUS_SEND_REQUEST);
if (unlikely(ph == NULL)) {
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:57:49 +08:00
if (need_wait && skb) {
timeo = sock_sndtimeo(&po->sk, msg->msg_flags & MSG_DONTWAIT);
timeo = wait_for_completion_interruptible_timeout(&po->skb_completion, timeo);
if (timeo <= 0) {
err = !timeo ? -ETIMEDOUT : -ERESTARTSYS;
goto out_put;
}
}
/* check for additional frames */
continue;
}
skb = NULL;
tp_len = tpacket_parse_header(po, ph, size_max, &data);
if (tp_len < 0)
goto tpacket_error;
status = TP_STATUS_SEND_REQUEST;
hlen = LL_RESERVED_SPACE(dev);
tlen = dev->needed_tailroom;
if (po->has_vnet_hdr) {
vnet_hdr = data;
data += sizeof(*vnet_hdr);
tp_len -= sizeof(*vnet_hdr);
if (tp_len < 0 ||
__packet_snd_vnet_parse(vnet_hdr, tp_len)) {
tp_len = -EINVAL;
goto tpacket_error;
}
copylen = __virtio16_to_cpu(vio_le(),
vnet_hdr->hdr_len);
}
copylen = max_t(int, copylen, dev->hard_header_len);
skb = sock_alloc_send_skb(&po->sk,
hlen + tlen + sizeof(struct sockaddr_ll) +
(copylen - dev->hard_header_len),
!need_wait, &err);
if (unlikely(skb == NULL)) {
/* we assume the socket was initially writeable ... */
if (likely(len_sum > 0))
err = len_sum;
goto out_status;
}
tp_len = tpacket_fill_skb(po, skb, ph, dev, data, tp_len, proto,
addr, hlen, copylen, &sockc);
if (likely(tp_len >= 0) &&
tp_len > dev->mtu + reserve &&
!po->has_vnet_hdr &&
!packet_extra_vlan_len_allowed(dev, skb))
tp_len = -EMSGSIZE;
if (unlikely(tp_len < 0)) {
tpacket_error:
if (po->tp_loss) {
__packet_set_status(po, ph,
TP_STATUS_AVAILABLE);
packet_increment_head(&po->tx_ring);
kfree_skb(skb);
continue;
} else {
status = TP_STATUS_WRONG_FORMAT;
err = tp_len;
goto out_status;
}
}
if (po->has_vnet_hdr) {
if (virtio_net_hdr_to_skb(skb, vnet_hdr, vio_le())) {
tp_len = -EINVAL;
goto tpacket_error;
}
virtio_net_hdr_set_proto(skb, vnet_hdr);
}
skb->destructor = tpacket_destruct_skb;
__packet_set_status(po, ph, TP_STATUS_SENDING);
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
packet_inc_pending(&po->tx_ring);
status = TP_STATUS_SEND_REQUEST;
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
err = po->xmit(skb);
if (unlikely(err > 0)) {
err = net_xmit_errno(err);
if (err && __packet_get_status(po, ph) ==
TP_STATUS_AVAILABLE) {
/* skb was destructed already */
skb = NULL;
goto out_status;
}
/*
* skb was dropped but not destructed yet;
* let's treat it like congestion or err < 0
*/
err = 0;
}
packet_increment_head(&po->tx_ring);
len_sum += tp_len;
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
} while (likely((ph != NULL) ||
/* Note: packet_read_pending() might be slow if we have
* to call it as it's per_cpu variable, but in fast-path
* we already short-circuit the loop with the first
* condition, and luckily don't have to go that path
* anyway.
*/
(need_wait && packet_read_pending(&po->tx_ring))));
err = len_sum;
goto out_put;
out_status:
__packet_set_status(po, ph, status);
kfree_skb(skb);
out_put:
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
dev_put(dev);
out:
mutex_unlock(&po->pg_vec_lock);
return err;
}
static struct sk_buff *packet_alloc_skb(struct sock *sk, size_t prepad,
size_t reserve, size_t len,
size_t linear, int noblock,
int *err)
{
struct sk_buff *skb;
/* Under a page? Don't bother with paged skb. */
if (prepad + len < PAGE_SIZE || !linear)
linear = len;
skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock,
err, 0);
if (!skb)
return NULL;
skb_reserve(skb, reserve);
skb_put(skb, linear);
skb->data_len = len - linear;
skb->len += len - linear;
return skb;
}
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
DECLARE_SOCKADDR(struct sockaddr_ll *, saddr, msg->msg_name);
struct sk_buff *skb;
struct net_device *dev;
__be16 proto;
unsigned char *addr = NULL;
int err, reserve = 0;
struct sockcm_cookie sockc;
struct virtio_net_hdr vnet_hdr = { 0 };
int offset = 0;
struct packet_sock *po = pkt_sk(sk);
bool has_vnet_hdr = false;
int hlen, tlen, linear;
int extra_len = 0;
/*
* Get and verify the address.
*/
if (likely(saddr == NULL)) {
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
dev = packet_cached_dev_get(po);
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
proto = READ_ONCE(po->num);
} else {
err = -EINVAL;
if (msg->msg_namelen < sizeof(struct sockaddr_ll))
goto out;
if (msg->msg_namelen < (saddr->sll_halen + offsetof(struct sockaddr_ll, sll_addr)))
goto out;
proto = saddr->sll_protocol;
dev = dev_get_by_index(sock_net(sk), saddr->sll_ifindex);
if (sock->type == SOCK_DGRAM) {
if (dev && msg->msg_namelen < dev->addr_len +
offsetof(struct sockaddr_ll, sll_addr))
goto out_unlock;
addr = saddr->sll_addr;
}
}
err = -ENXIO;
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
if (unlikely(dev == NULL))
goto out_unlock;
err = -ENETDOWN;
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
if (unlikely(!(dev->flags & IFF_UP)))
goto out_unlock;
sockcm_init(&sockc, sk);
sockc.mark = sk->sk_mark;
if (msg->msg_controllen) {
err = sock_cmsg_send(sk, msg, &sockc);
if (unlikely(err))
goto out_unlock;
}
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
if (sock->type == SOCK_RAW)
reserve = dev->hard_header_len;
if (po->has_vnet_hdr) {
err = packet_snd_vnet_parse(msg, &len, &vnet_hdr);
if (err)
goto out_unlock;
has_vnet_hdr = true;
}
if (unlikely(sock_flag(sk, SOCK_NOFCS))) {
if (!netif_supports_nofcs(dev)) {
err = -EPROTONOSUPPORT;
goto out_unlock;
}
extra_len = 4; /* We're doing our own CRC */
}
err = -EMSGSIZE;
if (!vnet_hdr.gso_type &&
(len > dev->mtu + reserve + VLAN_HLEN + extra_len))
goto out_unlock;
err = -ENOBUFS;
hlen = LL_RESERVED_SPACE(dev);
tlen = dev->needed_tailroom;
linear = __virtio16_to_cpu(vio_le(), vnet_hdr.hdr_len);
linear = max(linear, min_t(int, len, dev->hard_header_len));
skb = packet_alloc_skb(sk, hlen + tlen, hlen, len, linear,
msg->msg_flags & MSG_DONTWAIT, &err);
if (skb == NULL)
goto out_unlock;
skb_reset_network_header(skb);
err = -EINVAL;
if (sock->type == SOCK_DGRAM) {
offset = dev_hard_header(skb, dev, ntohs(proto), addr, NULL, len);
if (unlikely(offset < 0))
goto out_free;
} else if (reserve) {
skb_reserve(skb, -reserve);
af_packet: fix raw sockets over 6in4 tunnel Since commit cb9f1b783850, scapy (which uses an AF_PACKET socket in SOCK_RAW mode) is unable to send a basic icmp packet over a sit tunnel: Here is a example of the setup: $ ip link set ntfp2 up $ ip addr add 10.125.0.1/24 dev ntfp2 $ ip tunnel add tun1 mode sit ttl 64 local 10.125.0.1 remote 10.125.0.2 dev ntfp2 $ ip addr add fd00:cafe:cafe::1/128 dev tun1 $ ip link set dev tun1 up $ ip route add fd00:200::/64 dev tun1 $ scapy >>> p = [] >>> p += IPv6(src='fd00:100::1', dst='fd00:200::1')/ICMPv6EchoRequest() >>> send(p, count=1, inter=0.1) >>> quit() $ ip -s link ls dev tun1 | grep -A1 "TX.*errors" TX: bytes packets errors dropped carrier collsns 0 0 1 0 0 0 The problem is that the network offset is set to the hard_header_len of the output device (tun1, ie 14 + 20) and in our case, because the packet is small (48 bytes) the pskb_inet_may_pull() fails (it tries to pull 40 bytes (ipv6 header) starting from the network offset). This problem is more generally related to device with variable hard header length. To avoid a too intrusive patch in the current release, a (ugly) workaround is proposed in this patch. It has to be cleaned up in net-next. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=993675a3100b1 Link: http://patchwork.ozlabs.org/patch/1024489/ Fixes: cb9f1b783850 ("ip: validate header length on virtual device xmit") CC: Willem de Bruijn <willemb@google.com> CC: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17 18:27:22 +08:00
if (len < reserve + sizeof(struct ipv6hdr) &&
dev->min_header_len != dev->hard_header_len)
skb_reset_network_header(skb);
}
/* Returns -EFAULT on error */
err = skb_copy_datagram_from_iter(skb, offset, &msg->msg_iter, len);
if (err)
goto out_free;
if (sock->type == SOCK_RAW &&
!dev_validate_header(dev, skb->data, len)) {
err = -EINVAL;
goto out_free;
}
skb_setup_tx_timestamp(skb, sockc.tsflags);
if (!vnet_hdr.gso_type && (len > dev->mtu + reserve + extra_len) &&
!packet_extra_vlan_len_allowed(dev, skb)) {
err = -EMSGSIZE;
goto out_free;
}
skb->protocol = proto;
skb->dev = dev;
skb->priority = sk->sk_priority;
skb->mark = sockc.mark;
skb->tstamp = sockc.transmit_time;
packet: check for ndo_select_queue during queue selection Mathias reported that on an AMD Geode LX embedded board (ALiX) with ath9k driver PACKET_QDISC_BYPASS, introduced in commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option"), triggers a WARN_ON() coming from the driver itself via 066dae93bdf ("ath9k: rework tx queue selection and fix queue stopping/waking"). The reason why this happened is that ndo_select_queue() call is not invoked from direct xmit path i.e. for ieee80211 subsystem that sets queue and TID (similar to 802.1d tag) which is being put into the frame through 802.11e (WMM, QoS). If that is not set, pending frame counter for e.g. ath9k can get messed up. So the WARN_ON() in ath9k is absolutely legitimate. Generally, the hw queue selection in ieee80211 depends on the type of traffic, and priorities are set according to ieee80211_ac_numbers mapping; working in a similar way as DiffServ only on a lower layer, so that the AP can favour frames that have "real-time" requirements like voice or video data frames. Therefore, check for presence of ndo_select_queue() in netdev ops and, if available, invoke it with a fallback handler to __packet_pick_tx_queue(), so that driver such as bnx2x, ixgbe, or mlx4 can still select a hw queue for transmission in relation to the current CPU while e.g. ieee80211 subsystem can make their own choices. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:22 +08:00
if (has_vnet_hdr) {
err = virtio_net_hdr_to_skb(skb, &vnet_hdr, vio_le());
if (err)
goto out_free;
len += sizeof(vnet_hdr);
virtio_net_hdr_set_proto(skb, &vnet_hdr);
}
packet_parse_headers(skb, sock);
if (unlikely(extra_len == 4))
skb->no_fcs = 1;
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
err = po->xmit(skb);
if (err > 0 && (err = net_xmit_errno(err)) != 0)
goto out_unlock;
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
dev_put(dev);
return len;
out_free:
kfree_skb(skb);
out_unlock:
packet: fix use after free race in send path when dev is released Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 23:50:58 +08:00
if (dev)
dev_put(dev);
out:
return err;
}
static int packet_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
/* Reading tx_ring.pg_vec without holding pg_vec_lock is racy.
* tpacket_snd() will redo the check safely.
*/
if (data_race(po->tx_ring.pg_vec))
return tpacket_snd(po, msg);
return packet_snd(sock, msg, len);
}
/*
* Close a PACKET socket. This is fairly simple. We immediately go
* to 'closed' state and remove our protocol entry in the device list.
*/
static int packet_release(struct socket *sock)
{
struct sock *sk = sock->sk;
struct packet_sock *po;
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
struct packet_fanout *f;
struct net *net;
union tpacket_req_u req_u;
if (!sk)
return 0;
net = sock_net(sk);
po = pkt_sk(sk);
packet: Protect packet sk list with mutex (v2) Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 09:06:47 +08:00
mutex_lock(&net->packet.sklist_lock);
sk_del_node_init_rcu(sk);
packet: Protect packet sk list with mutex (v2) Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 09:06:47 +08:00
mutex_unlock(&net->packet.sklist_lock);
preempt_disable();
sock_prot_inuse_add(net, sk->sk_prot, -1);
packet: Protect packet sk list with mutex (v2) Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 09:06:47 +08:00
preempt_enable();
spin_lock(&po->bind_lock);
unregister_prot_hook(sk, false);
packet_cached_dev_reset(po);
if (po->prot_hook.dev) {
dev_put(po->prot_hook.dev);
po->prot_hook.dev = NULL;
}
spin_unlock(&po->bind_lock);
packet_flush_mclist(sk);
net: af_packet: fix race in PACKET_{R|T}X_RING In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 08:52:04 +08:00
lock_sock(sk);
if (po->rx_ring.pg_vec) {
memset(&req_u, 0, sizeof(req_u));
packet_set_ring(sk, &req_u, 1, 0);
}
if (po->tx_ring.pg_vec) {
memset(&req_u, 0, sizeof(req_u));
packet_set_ring(sk, &req_u, 1, 1);
}
net: af_packet: fix race in PACKET_{R|T}X_RING In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 08:52:04 +08:00
release_sock(sk);
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
f = fanout_release(sk);
synchronize_net();
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
kfree(po->rollover);
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
if (f) {
fanout_release_data(f);
kvfree(f);
packet: Do not call fanout_release from atomic contexts Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 04:25:39 +08:00
}
/*
* Now the socket is dead. No more input will appear.
*/
sock_orphan(sk);
sock->sk = NULL;
/* Purge queues */
skb_queue_purge(&sk->sk_receive_queue);
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
packet_free_pending(po);
sk_refcnt_debug_release(sk);
sock_put(sk);
return 0;
}
/*
* Attach a packet hook.
*/
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
static int packet_do_bind(struct sock *sk, const char *name, int ifindex,
__be16 proto)
{
struct packet_sock *po = pkt_sk(sk);
struct net_device *dev_curr;
packet: improve socket create/bind latency in some cases Most people acquire PF_PACKET sockets with a protocol argument in the socket call, e.g. libpcap does so with htons(ETH_P_ALL) for all its sockets. Most likely, at some point in time a subsequent bind() call will follow, e.g. in libpcap with ... memset(&sll, 0, sizeof(sll)); sll.sll_family = AF_PACKET; sll.sll_ifindex = ifindex; sll.sll_protocol = htons(ETH_P_ALL); ... as arguments. What happens in the kernel is that already in socket() syscall, we install a proto hook via register_prot_hook() if our protocol argument is != 0. Yet, in bind() we're almost doing the same work by doing a unregister_prot_hook() with an expensive synchronize_net() call in case during socket() the proto was != 0, plus follow-up register_prot_hook() with a bound device to it this time, in order to limit traffic we get. In the case when the protocol and user supplied device index (== 0) does not change from socket() to bind(), we can spare us doing the same work twice. Similarly for re-binding to the same device and protocol. For these scenarios, we can decrease create/bind latency from ~7447us (sock-bind-2 case) to ~89us (sock-bind-1 case) with this patch. Alternatively, for the first case, if people care, they should simply create their sockets with proto == 0 argument and define the protocol during bind() as this saves a call to synchronize_net() as well (sock-bind-3 case). In all other cases, we're tied to user space behaviour we must not change, also since a bind() is not strictly required. Thus, we need the synchronize_net() to make sure no asynchronous packet processing paths still refer to the previous elements of po->prot_hook. In case of mmap()ed sockets, the workflow that includes bind() is socket() -> setsockopt(<ring>) -> bind(). In that case, a pair of {__unregister, register}_prot_hook is being called from setsockopt() in order to install the new protocol receive handler. Thus, when we call bind and can skip a re-hook, we have already previously installed the new handler. For fanout, this is handled different entirely, so we should be good. Timings on an i7-3520M machine: * sock-bind-1: 89 us * sock-bind-2: 7447 us * sock-bind-3: 75 us sock-bind-1: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=all(0), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-2: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-3: socket(PF_PACKET, SOCK_RAW, 0) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:34 +08:00
__be16 proto_curr;
bool need_rehook;
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
struct net_device *dev = NULL;
int ret = 0;
bool unlisted = false;
lock_sock(sk);
spin_lock(&po->bind_lock);
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
rcu_read_lock();
if (po->fanout) {
ret = -EINVAL;
goto out_unlock;
}
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
if (name) {
dev = dev_get_by_name_rcu(sock_net(sk), name);
if (!dev) {
ret = -ENODEV;
goto out_unlock;
}
} else if (ifindex) {
dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
if (!dev) {
ret = -ENODEV;
goto out_unlock;
}
}
if (dev)
dev_hold(dev);
packet: improve socket create/bind latency in some cases Most people acquire PF_PACKET sockets with a protocol argument in the socket call, e.g. libpcap does so with htons(ETH_P_ALL) for all its sockets. Most likely, at some point in time a subsequent bind() call will follow, e.g. in libpcap with ... memset(&sll, 0, sizeof(sll)); sll.sll_family = AF_PACKET; sll.sll_ifindex = ifindex; sll.sll_protocol = htons(ETH_P_ALL); ... as arguments. What happens in the kernel is that already in socket() syscall, we install a proto hook via register_prot_hook() if our protocol argument is != 0. Yet, in bind() we're almost doing the same work by doing a unregister_prot_hook() with an expensive synchronize_net() call in case during socket() the proto was != 0, plus follow-up register_prot_hook() with a bound device to it this time, in order to limit traffic we get. In the case when the protocol and user supplied device index (== 0) does not change from socket() to bind(), we can spare us doing the same work twice. Similarly for re-binding to the same device and protocol. For these scenarios, we can decrease create/bind latency from ~7447us (sock-bind-2 case) to ~89us (sock-bind-1 case) with this patch. Alternatively, for the first case, if people care, they should simply create their sockets with proto == 0 argument and define the protocol during bind() as this saves a call to synchronize_net() as well (sock-bind-3 case). In all other cases, we're tied to user space behaviour we must not change, also since a bind() is not strictly required. Thus, we need the synchronize_net() to make sure no asynchronous packet processing paths still refer to the previous elements of po->prot_hook. In case of mmap()ed sockets, the workflow that includes bind() is socket() -> setsockopt(<ring>) -> bind(). In that case, a pair of {__unregister, register}_prot_hook is being called from setsockopt() in order to install the new protocol receive handler. Thus, when we call bind and can skip a re-hook, we have already previously installed the new handler. For fanout, this is handled different entirely, so we should be good. Timings on an i7-3520M machine: * sock-bind-1: 89 us * sock-bind-2: 7447 us * sock-bind-3: 75 us sock-bind-1: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=all(0), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-2: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-3: socket(PF_PACKET, SOCK_RAW, 0) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:34 +08:00
proto_curr = po->prot_hook.type;
dev_curr = po->prot_hook.dev;
need_rehook = proto_curr != proto || dev_curr != dev;
if (need_rehook) {
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
if (po->running) {
rcu_read_unlock();
net/packet: fix a race in packet_bind() and packet_notifier() syzbot reported crashes [1] and provided a C repro easing bug hunting. When/if packet_do_bind() calls __unregister_prot_hook() and releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This calls register_prot_hook() and hooks again the socket right before first thread is able to grab again po->bind_lock. Fixes this issue by temporarily setting po->num to 0, as suggested by David Miller. [1] dev_remove_pack: ffff8801bf16fa80 not found ------------[ cut here ]------------ kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); ) invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: device syz0 entered promiscuous mode CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cc57a500 task.stack: ffff8801cc588000 RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945 RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293 RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2 RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810 device syz0 entered promiscuous mode RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8 R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0 FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106 tun_detach drivers/net/tun.c:670 [inline] tun_chr_close+0x49/0x60 drivers/net/tun.c:2845 __fput+0x333/0x7f0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ae0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 SYSC_exit_group kernel/exit.c:979 [inline] SyS_exit_group+0x1d/0x20 kernel/exit.c:977 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x44ad19 Fixes: 30f7ea1c2b5f ("packet: race condition in packet_bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29 00:03:30 +08:00
/* prevents packet_notifier() from calling
* register_prot_hook()
*/
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
WRITE_ONCE(po->num, 0);
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
__unregister_prot_hook(sk, true);
rcu_read_lock();
dev_curr = po->prot_hook.dev;
if (dev)
unlisted = !dev_get_by_index_rcu(sock_net(sk),
dev->ifindex);
}
net/packet: fix a race in packet_bind() and packet_notifier() syzbot reported crashes [1] and provided a C repro easing bug hunting. When/if packet_do_bind() calls __unregister_prot_hook() and releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This calls register_prot_hook() and hooks again the socket right before first thread is able to grab again po->bind_lock. Fixes this issue by temporarily setting po->num to 0, as suggested by David Miller. [1] dev_remove_pack: ffff8801bf16fa80 not found ------------[ cut here ]------------ kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); ) invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: device syz0 entered promiscuous mode CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cc57a500 task.stack: ffff8801cc588000 RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945 RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293 RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2 RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810 device syz0 entered promiscuous mode RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8 R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0 FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106 tun_detach drivers/net/tun.c:670 [inline] tun_chr_close+0x49/0x60 drivers/net/tun.c:2845 __fput+0x333/0x7f0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ae0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 SYSC_exit_group kernel/exit.c:979 [inline] SyS_exit_group+0x1d/0x20 kernel/exit.c:977 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x44ad19 Fixes: 30f7ea1c2b5f ("packet: race condition in packet_bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29 00:03:30 +08:00
BUG_ON(po->running);
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
WRITE_ONCE(po->num, proto);
packet: improve socket create/bind latency in some cases Most people acquire PF_PACKET sockets with a protocol argument in the socket call, e.g. libpcap does so with htons(ETH_P_ALL) for all its sockets. Most likely, at some point in time a subsequent bind() call will follow, e.g. in libpcap with ... memset(&sll, 0, sizeof(sll)); sll.sll_family = AF_PACKET; sll.sll_ifindex = ifindex; sll.sll_protocol = htons(ETH_P_ALL); ... as arguments. What happens in the kernel is that already in socket() syscall, we install a proto hook via register_prot_hook() if our protocol argument is != 0. Yet, in bind() we're almost doing the same work by doing a unregister_prot_hook() with an expensive synchronize_net() call in case during socket() the proto was != 0, plus follow-up register_prot_hook() with a bound device to it this time, in order to limit traffic we get. In the case when the protocol and user supplied device index (== 0) does not change from socket() to bind(), we can spare us doing the same work twice. Similarly for re-binding to the same device and protocol. For these scenarios, we can decrease create/bind latency from ~7447us (sock-bind-2 case) to ~89us (sock-bind-1 case) with this patch. Alternatively, for the first case, if people care, they should simply create their sockets with proto == 0 argument and define the protocol during bind() as this saves a call to synchronize_net() as well (sock-bind-3 case). In all other cases, we're tied to user space behaviour we must not change, also since a bind() is not strictly required. Thus, we need the synchronize_net() to make sure no asynchronous packet processing paths still refer to the previous elements of po->prot_hook. In case of mmap()ed sockets, the workflow that includes bind() is socket() -> setsockopt(<ring>) -> bind(). In that case, a pair of {__unregister, register}_prot_hook is being called from setsockopt() in order to install the new protocol receive handler. Thus, when we call bind and can skip a re-hook, we have already previously installed the new handler. For fanout, this is handled different entirely, so we should be good. Timings on an i7-3520M machine: * sock-bind-1: 89 us * sock-bind-2: 7447 us * sock-bind-3: 75 us sock-bind-1: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=all(0), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-2: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-3: socket(PF_PACKET, SOCK_RAW, 0) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:34 +08:00
po->prot_hook.type = proto;
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
if (unlikely(unlisted)) {
dev_put(dev);
po->prot_hook.dev = NULL;
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
WRITE_ONCE(po->ifindex, -1);
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
packet_cached_dev_reset(po);
} else {
po->prot_hook.dev = dev;
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
WRITE_ONCE(po->ifindex, dev ? dev->ifindex : 0);
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
packet_cached_dev_assign(po, dev);
}
packet: improve socket create/bind latency in some cases Most people acquire PF_PACKET sockets with a protocol argument in the socket call, e.g. libpcap does so with htons(ETH_P_ALL) for all its sockets. Most likely, at some point in time a subsequent bind() call will follow, e.g. in libpcap with ... memset(&sll, 0, sizeof(sll)); sll.sll_family = AF_PACKET; sll.sll_ifindex = ifindex; sll.sll_protocol = htons(ETH_P_ALL); ... as arguments. What happens in the kernel is that already in socket() syscall, we install a proto hook via register_prot_hook() if our protocol argument is != 0. Yet, in bind() we're almost doing the same work by doing a unregister_prot_hook() with an expensive synchronize_net() call in case during socket() the proto was != 0, plus follow-up register_prot_hook() with a bound device to it this time, in order to limit traffic we get. In the case when the protocol and user supplied device index (== 0) does not change from socket() to bind(), we can spare us doing the same work twice. Similarly for re-binding to the same device and protocol. For these scenarios, we can decrease create/bind latency from ~7447us (sock-bind-2 case) to ~89us (sock-bind-1 case) with this patch. Alternatively, for the first case, if people care, they should simply create their sockets with proto == 0 argument and define the protocol during bind() as this saves a call to synchronize_net() as well (sock-bind-3 case). In all other cases, we're tied to user space behaviour we must not change, also since a bind() is not strictly required. Thus, we need the synchronize_net() to make sure no asynchronous packet processing paths still refer to the previous elements of po->prot_hook. In case of mmap()ed sockets, the workflow that includes bind() is socket() -> setsockopt(<ring>) -> bind(). In that case, a pair of {__unregister, register}_prot_hook is being called from setsockopt() in order to install the new protocol receive handler. Thus, when we call bind and can skip a re-hook, we have already previously installed the new handler. For fanout, this is handled different entirely, so we should be good. Timings on an i7-3520M machine: * sock-bind-1: 89 us * sock-bind-2: 7447 us * sock-bind-3: 75 us sock-bind-1: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=all(0), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-2: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-3: socket(PF_PACKET, SOCK_RAW, 0) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:34 +08:00
}
if (dev_curr)
dev_put(dev_curr);
packet: improve socket create/bind latency in some cases Most people acquire PF_PACKET sockets with a protocol argument in the socket call, e.g. libpcap does so with htons(ETH_P_ALL) for all its sockets. Most likely, at some point in time a subsequent bind() call will follow, e.g. in libpcap with ... memset(&sll, 0, sizeof(sll)); sll.sll_family = AF_PACKET; sll.sll_ifindex = ifindex; sll.sll_protocol = htons(ETH_P_ALL); ... as arguments. What happens in the kernel is that already in socket() syscall, we install a proto hook via register_prot_hook() if our protocol argument is != 0. Yet, in bind() we're almost doing the same work by doing a unregister_prot_hook() with an expensive synchronize_net() call in case during socket() the proto was != 0, plus follow-up register_prot_hook() with a bound device to it this time, in order to limit traffic we get. In the case when the protocol and user supplied device index (== 0) does not change from socket() to bind(), we can spare us doing the same work twice. Similarly for re-binding to the same device and protocol. For these scenarios, we can decrease create/bind latency from ~7447us (sock-bind-2 case) to ~89us (sock-bind-1 case) with this patch. Alternatively, for the first case, if people care, they should simply create their sockets with proto == 0 argument and define the protocol during bind() as this saves a call to synchronize_net() as well (sock-bind-3 case). In all other cases, we're tied to user space behaviour we must not change, also since a bind() is not strictly required. Thus, we need the synchronize_net() to make sure no asynchronous packet processing paths still refer to the previous elements of po->prot_hook. In case of mmap()ed sockets, the workflow that includes bind() is socket() -> setsockopt(<ring>) -> bind(). In that case, a pair of {__unregister, register}_prot_hook is being called from setsockopt() in order to install the new protocol receive handler. Thus, when we call bind and can skip a re-hook, we have already previously installed the new handler. For fanout, this is handled different entirely, so we should be good. Timings on an i7-3520M machine: * sock-bind-1: 89 us * sock-bind-2: 7447 us * sock-bind-3: 75 us sock-bind-1: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=all(0), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-2: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP)) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 sock-bind-3: socket(PF_PACKET, SOCK_RAW, 0) = 3 bind(3, {sa_family=AF_PACKET, proto=htons(ETH_P_IP), if=lo(1), pkttype=PACKET_HOST, addr(0)={0, }, 20) = 0 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:34 +08:00
if (proto == 0 || !need_rehook)
goto out_unlock;
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
if (!unlisted && (!dev || (dev->flags & IFF_UP))) {
register_prot_hook(sk);
} else {
sk->sk_err = ENETDOWN;
if (!sock_flag(sk, SOCK_DEAD))
sk_error_report(sk);
}
out_unlock:
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
rcu_read_unlock();
spin_unlock(&po->bind_lock);
release_sock(sk);
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
return ret;
}
/*
* Bind a packet socket to a device
*/
static int packet_bind_spkt(struct socket *sock, struct sockaddr *uaddr,
int addr_len)
{
struct sock *sk = sock->sk;
net: don't call strlen() on the user buffer in packet_bind_spkt() KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in packet_bind_spkt(): Acked-by: Eric Dumazet <edumazet@google.com> ================================================================== BUG: KMSAN: use of unitialized memory CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48 ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550 0000000000000000 0000000000000092 00000000ec400911 0000000000000002 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51 [<ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003 [<ffffffff818a783b>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424 [< inline >] strlen lib/string.c:484 [<ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144 [<ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230 net/packet/af_packet.c:3132 [<ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? chained origin: 00000000eba00911 [<ffffffff810bb787>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [< inline >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322 [< inline >] kmsan_save_stack mm/kmsan/kmsan.c:334 [<ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:527 [<ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380 [<ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? origin description: ----address@SYSC_bind (origin=00000000eb400911) ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) , when I run the following program as root: ===================================== #include <string.h> #include <sys/socket.h> #include <netpacket/packet.h> #include <net/ethernet.h> int main() { struct sockaddr addr; memset(&addr, 0xff, sizeof(addr)); addr.sa_family = AF_PACKET; int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL)); bind(fd, &addr, sizeof(addr)); return 0; } ===================================== This happens because addr.sa_data copied from the userspace is not zero-terminated, and copying it with strlcpy() in packet_bind_spkt() results in calling strlen() on the kernel copy of that non-terminated buffer. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-01 19:57:20 +08:00
char name[sizeof(uaddr->sa_data) + 1];
/*
* Check legality
*/
if (addr_len != sizeof(struct sockaddr))
return -EINVAL;
net: don't call strlen() on the user buffer in packet_bind_spkt() KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in packet_bind_spkt(): Acked-by: Eric Dumazet <edumazet@google.com> ================================================================== BUG: KMSAN: use of unitialized memory CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48 ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550 0000000000000000 0000000000000092 00000000ec400911 0000000000000002 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51 [<ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003 [<ffffffff818a783b>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424 [< inline >] strlen lib/string.c:484 [<ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144 [<ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230 net/packet/af_packet.c:3132 [<ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? chained origin: 00000000eba00911 [<ffffffff810bb787>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [< inline >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322 [< inline >] kmsan_save_stack mm/kmsan/kmsan.c:334 [<ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:527 [<ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380 [<ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? origin description: ----address@SYSC_bind (origin=00000000eb400911) ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) , when I run the following program as root: ===================================== #include <string.h> #include <sys/socket.h> #include <netpacket/packet.h> #include <net/ethernet.h> int main() { struct sockaddr addr; memset(&addr, 0xff, sizeof(addr)); addr.sa_family = AF_PACKET; int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL)); bind(fd, &addr, sizeof(addr)); return 0; } ===================================== This happens because addr.sa_data copied from the userspace is not zero-terminated, and copying it with strlcpy() in packet_bind_spkt() results in calling strlen() on the kernel copy of that non-terminated buffer. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-01 19:57:20 +08:00
/* uaddr->sa_data comes from the userspace, it's not guaranteed to be
* zero-terminated.
*/
memcpy(name, uaddr->sa_data, sizeof(uaddr->sa_data));
name[sizeof(uaddr->sa_data)] = 0;
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
return packet_do_bind(sk, name, 0, pkt_sk(sk)->num);
}
static int packet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
{
struct sockaddr_ll *sll = (struct sockaddr_ll *)uaddr;
struct sock *sk = sock->sk;
/*
* Check legality
*/
if (addr_len < sizeof(struct sockaddr_ll))
return -EINVAL;
if (sll->sll_family != AF_PACKET)
return -EINVAL;
packet: race condition in packet_bind There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06 00:16:14 +08:00
return packet_do_bind(sk, NULL, sll->sll_ifindex,
sll->sll_protocol ? : pkt_sk(sk)->num);
}
static struct proto packet_proto = {
.name = "PACKET",
.owner = THIS_MODULE,
.obj_size = sizeof(struct packet_sock),
};
/*
* Create a packet of type SOCK_PACKET.
*/
static int packet_create(struct net *net, struct socket *sock, int protocol,
int kern)
{
struct sock *sk;
struct packet_sock *po;
__be16 proto = (__force __be16)protocol; /* weird, but documented */
int err;
if (!ns_capable(net->user_ns, CAP_NET_RAW))
return -EPERM;
if (sock->type != SOCK_DGRAM && sock->type != SOCK_RAW &&
sock->type != SOCK_PACKET)
return -ESOCKTNOSUPPORT;
sock->state = SS_UNCONNECTED;
err = -ENOBUFS;
sk = sk_alloc(net, PF_PACKET, GFP_KERNEL, &packet_proto, kern);
if (sk == NULL)
goto out;
sock->ops = &packet_ops;
if (sock->type == SOCK_PACKET)
sock->ops = &packet_ops_spkt;
sock_init_data(sock, sk);
po = pkt_sk(sk);
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:57:49 +08:00
init_completion(&po->skb_completion);
sk->sk_family = PF_PACKET;
po->num = proto;
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
po->xmit = dev_queue_xmit;
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
err = packet_alloc_pending(po);
if (err)
goto out2;
packet_cached_dev_reset(po);
sk->sk_destruct = packet_sock_destruct;
sk_refcnt_debug_inc(sk);
/*
* Attach a protocol block
*/
spin_lock_init(&po->bind_lock);
mutex_init(&po->pg_vec_lock);
po->rollover = NULL;
po->prot_hook.func = packet_rcv;
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
po->prot_hook.af_packet_priv = sk;
if (proto) {
po->prot_hook.type = proto;
__register_prot_hook(sk);
}
packet: Protect packet sk list with mutex (v2) Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 09:06:47 +08:00
mutex_lock(&net->packet.sklist_lock);
sk_add_node_tail_rcu(sk, &net->packet.sklist);
packet: Protect packet sk list with mutex (v2) Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 09:06:47 +08:00
mutex_unlock(&net->packet.sklist_lock);
preempt_disable();
sock_prot_inuse_add(net, &packet_proto, 1);
packet: Protect packet sk list with mutex (v2) Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 09:06:47 +08:00
preempt_enable();
return 0;
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
out2:
sk_free(sk);
out:
return err;
}
/*
* Pull a packet from our receive queue and hand it to the user.
* If necessary we block.
*/
static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
int flags)
{
struct sock *sk = sock->sk;
struct sk_buff *skb;
int copied, err;
int vnet_hdr_len = 0;
unsigned int origlen = 0;
err = -EINVAL;
if (flags & ~(MSG_PEEK|MSG_DONTWAIT|MSG_TRUNC|MSG_CMSG_COMPAT|MSG_ERRQUEUE))
goto out;
#if 0
/* What error should we return now? EUNATTACH? */
if (pkt_sk(sk)->ifindex < 0)
return -ENODEV;
#endif
if (flags & MSG_ERRQUEUE) {
err = sock_recv_errqueue(sk, msg, len,
SOL_PACKET, PACKET_TX_TIMESTAMP);
goto out;
}
/*
* Call the generic datagram receiver. This handles all sorts
* of horrible races and re-entrancy so we can forget about it
* in the protocol layers.
*
* Now it will return ENETDOWN, if device have just gone down,
* but then it will block.
*/
skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &err);
/*
* An error occurred so return it. Because skb_recv_datagram()
* handles the blocking we don't see and worry about blocking
* retries.
*/
if (skb == NULL)
goto out;
packet_rcv_try_clear_pressure(pkt_sk(sk));
packet: rollover lock contention avoidance Rollover has to call packet_rcv_has_room on sockets in the fanout group to find a socket to migrate to. This operation is expensive especially if the packet sockets use rings, when a lock has to be acquired. Avoid pounding on the lock by all sockets by temporarily marking a socket as "under memory pressure" when such pressure is detected. While set, only the socket owner may call packet_rcv_has_room on the socket. Once it detects normal conditions, it clears the flag. The socket is not used as a victim by any other socket in the meantime. Under reasonably balanced load, each socket writer frequently calls packet_rcv_has_room and clears its own pressure field. As a backup for when the socket is rarely written to, also clear the flag on reading (packet_recvmsg, packet_poll) if this can be done cheaply (i.e., without calling packet_rcv_has_room). This is only for edge cases. Tested: Ran bench_rollover: a process with 8 sockets in a single fanout group, each pinned to a single cpu that receives one nic recv interrupt. RPS and RFS are disabled. The benchmark uses packet rx_ring, which has to take a lock when determining whether a socket has room. Sent 3.5 Mpps of UDP traffic with sufficient entropy to spread uniformly across the packet sockets (and inserted an iptables rule to drop in PREROUTING to avoid protocol stack processing). Without this patch, all sockets try to migrate traffic to neighbors, causing lock contention when searching for a non- empty neighbor. The lock is the top 9 entries. perf record -a -g sleep 5 - 17.82% bench_rollover [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock - 99.00% spin_lock + 81.77% packet_rcv_has_room.isra.41 + 18.23% tpacket_rcv + 0.84% packet_rcv_has_room.isra.41 + 5.20% ksoftirqd/6 [kernel.kallsyms] [k] _raw_spin_lock + 5.15% ksoftirqd/1 [kernel.kallsyms] [k] _raw_spin_lock + 5.14% ksoftirqd/2 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/7 [kernel.kallsyms] [k] _raw_spin_lock + 5.12% ksoftirqd/5 [kernel.kallsyms] [k] _raw_spin_lock + 5.10% ksoftirqd/4 [kernel.kallsyms] [k] _raw_spin_lock + 4.66% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_lock + 4.45% ksoftirqd/3 [kernel.kallsyms] [k] _raw_spin_lock + 1.55% bench_rollover [kernel.kallsyms] [k] packet_rcv_has_room.isra.41 On net-next with this patch, this lock contention is no longer a top entry. Most time is spent in the actual read function. Next up are other locks: + 15.52% bench_rollover bench_rollover [.] reader + 4.68% swapper [kernel.kallsyms] [k] memcpy_erms + 2.77% swapper [kernel.kallsyms] [k] packet_lookup_frame.isra.51 + 2.56% ksoftirqd/1 [kernel.kallsyms] [k] memcpy_erms + 2.16% swapper [kernel.kallsyms] [k] tpacket_rcv + 1.93% swapper [kernel.kallsyms] [k] mlx4_en_process_rx_cq Looking closer at the remaining _raw_spin_lock, the cost of probing in rollover is now comparable to the cost of taking the lock later in tpacket_rcv. - 1.51% swapper [kernel.kallsyms] [k] _raw_spin_lock - _raw_spin_lock + 33.41% packet_rcv_has_room + 28.15% tpacket_rcv + 19.54% enqueue_to_backlog + 6.45% __free_pages_ok + 2.78% packet_rcv_fanout + 2.13% fanout_demux_rollover + 2.01% netif_receive_skb_internal Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 23:56:48 +08:00
if (pkt_sk(sk)->has_vnet_hdr) {
err = packet_rcv_vnet(msg, skb, &len);
if (err)
goto out_free;
vnet_hdr_len = sizeof(struct virtio_net_hdr);
}
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
/* You lose any data beyond the buffer you gave. If it worries
* a user program they can ask the device for its MTU
* anyway.
*/
copied = skb->len;
if (copied > len) {
copied = len;
msg->msg_flags |= MSG_TRUNC;
}
err = skb_copy_datagram_msg(skb, 0, msg, copied);
if (err)
goto out_free;
if (sock->type != SOCK_PACKET) {
struct sockaddr_ll *sll = &PACKET_SKB_CB(skb)->sa.ll;
/* Original length was stored in sockaddr_ll fields */
origlen = PACKET_SKB_CB(skb)->sa.origlen;
sll->sll_family = AF_PACKET;
sll->sll_protocol = skb->protocol;
}
net: Generalize socket rx gap / receive queue overflow cmsg Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 04:26:31 +08:00
sock_recv_ts_and_drops(msg, sk, skb);
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
if (msg->msg_name) {
int copy_len;
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
/* If the address length field is there to be filled
* in, we fill it in now.
*/
if (sock->type == SOCK_PACKET) {
__sockaddr_check_size(sizeof(struct sockaddr_pkt));
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
msg->msg_namelen = sizeof(struct sockaddr_pkt);
copy_len = msg->msg_namelen;
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
} else {
struct sockaddr_ll *sll = &PACKET_SKB_CB(skb)->sa.ll;
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
msg->msg_namelen = sll->sll_halen +
offsetof(struct sockaddr_ll, sll_addr);
copy_len = msg->msg_namelen;
if (msg->msg_namelen < sizeof(struct sockaddr_ll)) {
memset(msg->msg_name +
offsetof(struct sockaddr_ll, sll_addr),
0, sizeof(sll->sll_addr));
msg->msg_namelen = sizeof(struct sockaddr_ll);
}
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
}
memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa, copy_len);
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
}
if (pkt_sk(sk)->auxdata) {
struct tpacket_auxdata aux;
aux.tp_status = TP_STATUS_USER;
if (skb->ip_summed == CHECKSUM_PARTIAL)
aux.tp_status |= TP_STATUS_CSUMNOTREADY;
else if (skb->pkt_type != PACKET_OUTGOING &&
(skb->ip_summed == CHECKSUM_COMPLETE ||
skb_csum_unnecessary(skb)))
aux.tp_status |= TP_STATUS_CSUM_VALID;
aux.tp_len = origlen;
aux.tp_snaplen = skb->len;
aux.tp_mac = 0;
aux.tp_net = skb_network_offset(skb);
if (skb_vlan_tag_present(skb)) {
aux.tp_vlan_tci = skb_vlan_tag_get(skb);
aux.tp_vlan_tpid = ntohs(skb->vlan_proto);
aux.tp_status |= TP_STATUS_VLAN_VALID | TP_STATUS_VLAN_TPID_VALID;
} else {
aux.tp_vlan_tci = 0;
aux.tp_vlan_tpid = 0;
}
put_cmsg(msg, SOL_PACKET, PACKET_AUXDATA, sizeof(aux), &aux);
}
/*
* Free or return the buffer as appropriate. Again this
* hides all the races and re-entrancy issues from us.
*/
err = vnet_hdr_len + ((flags&MSG_TRUNC) ? skb->len : copied);
out_free:
skb_free_datagram(sk, skb);
out:
return err;
}
static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr,
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
int peer)
{
struct net_device *dev;
struct sock *sk = sock->sk;
if (peer)
return -EOPNOTSUPP;
uaddr->sa_family = AF_PACKET;
memset(uaddr->sa_data, 0, sizeof(uaddr->sa_data));
rcu_read_lock();
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
dev = dev_get_by_index_rcu(sock_net(sk), READ_ONCE(pkt_sk(sk)->ifindex));
if (dev)
strlcpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data));
rcu_read_unlock();
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
return sizeof(*uaddr);
}
static int packet_getname(struct socket *sock, struct sockaddr *uaddr,
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
int peer)
{
struct net_device *dev;
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
DECLARE_SOCKADDR(struct sockaddr_ll *, sll, uaddr);
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
int ifindex;
if (peer)
return -EOPNOTSUPP;
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
ifindex = READ_ONCE(po->ifindex);
sll->sll_family = AF_PACKET;
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
sll->sll_ifindex = ifindex;
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
sll->sll_protocol = READ_ONCE(po->num);
sll->sll_pkttype = 0;
rcu_read_lock();
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
if (dev) {
sll->sll_hatype = dev->type;
sll->sll_halen = dev->addr_len;
memcpy(sll->sll_addr, dev->dev_addr, dev->addr_len);
} else {
sll->sll_hatype = 0; /* Bad: we have no ARPHRD_UNSPEC */
sll->sll_halen = 0;
}
rcu_read_unlock();
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
return offsetof(struct sockaddr_ll, sll_addr) + sll->sll_halen;
}
static int packet_dev_mc(struct net_device *dev, struct packet_mclist *i,
int what)
{
switch (i->type) {
case PACKET_MR_MULTICAST:
if (i->alen != dev->addr_len)
return -EINVAL;
if (what > 0)
return dev_mc_add(dev, i->addr);
else
return dev_mc_del(dev, i->addr);
break;
case PACKET_MR_PROMISC:
return dev_set_promiscuity(dev, what);
case PACKET_MR_ALLMULTI:
return dev_set_allmulti(dev, what);
case PACKET_MR_UNICAST:
if (i->alen != dev->addr_len)
return -EINVAL;
if (what > 0)
return dev_uc_add(dev, i->addr);
else
return dev_uc_del(dev, i->addr);
break;
default:
break;
}
return 0;
}
static void packet_dev_mclist_delete(struct net_device *dev,
struct packet_mclist **mlp)
{
struct packet_mclist *ml;
while ((ml = *mlp) != NULL) {
if (ml->ifindex == dev->ifindex) {
packet_dev_mc(dev, ml, -1);
*mlp = ml->next;
kfree(ml);
} else
mlp = &ml->next;
}
}
static int packet_mc_add(struct sock *sk, struct packet_mreq_max *mreq)
{
struct packet_sock *po = pkt_sk(sk);
struct packet_mclist *ml, *i;
struct net_device *dev;
int err;
rtnl_lock();
err = -ENODEV;
dev = __dev_get_by_index(sock_net(sk), mreq->mr_ifindex);
if (!dev)
goto done;
err = -EINVAL;
if (mreq->mr_alen > dev->addr_len)
goto done;
err = -ENOBUFS;
i = kmalloc(sizeof(*i), GFP_KERNEL);
if (i == NULL)
goto done;
err = 0;
for (ml = po->mclist; ml; ml = ml->next) {
if (ml->ifindex == mreq->mr_ifindex &&
ml->type == mreq->mr_type &&
ml->alen == mreq->mr_alen &&
memcmp(ml->addr, mreq->mr_address, ml->alen) == 0) {
ml->count++;
/* Free the new element ... */
kfree(i);
goto done;
}
}
i->type = mreq->mr_type;
i->ifindex = mreq->mr_ifindex;
i->alen = mreq->mr_alen;
memcpy(i->addr, mreq->mr_address, i->alen);
memset(i->addr + i->alen, 0, sizeof(i->addr) - i->alen);
i->count = 1;
i->next = po->mclist;
po->mclist = i;
err = packet_dev_mc(dev, i, 1);
if (err) {
po->mclist = i->next;
kfree(i);
}
done:
rtnl_unlock();
return err;
}
static int packet_mc_drop(struct sock *sk, struct packet_mreq_max *mreq)
{
struct packet_mclist *ml, **mlp;
rtnl_lock();
for (mlp = &pkt_sk(sk)->mclist; (ml = *mlp) != NULL; mlp = &ml->next) {
if (ml->ifindex == mreq->mr_ifindex &&
ml->type == mreq->mr_type &&
ml->alen == mreq->mr_alen &&
memcmp(ml->addr, mreq->mr_address, ml->alen) == 0) {
if (--ml->count == 0) {
struct net_device *dev;
*mlp = ml->next;
dev = __dev_get_by_index(sock_net(sk), ml->ifindex);
if (dev)
packet_dev_mc(dev, ml, -1);
kfree(ml);
}
break;
}
}
rtnl_unlock();
return 0;
}
static void packet_flush_mclist(struct sock *sk)
{
struct packet_sock *po = pkt_sk(sk);
struct packet_mclist *ml;
if (!po->mclist)
return;
rtnl_lock();
while ((ml = po->mclist) != NULL) {
struct net_device *dev;
po->mclist = ml->next;
dev = __dev_get_by_index(sock_net(sk), ml->ifindex);
if (dev != NULL)
packet_dev_mc(dev, ml, -1);
kfree(ml);
}
rtnl_unlock();
}
static int
packet_setsockopt(struct socket *sock, int level, int optname, sockptr_t optval,
unsigned int optlen)
{
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
int ret;
if (level != SOL_PACKET)
return -ENOPROTOOPT;
switch (optname) {
case PACKET_ADD_MEMBERSHIP:
case PACKET_DROP_MEMBERSHIP:
{
struct packet_mreq_max mreq;
int len = optlen;
memset(&mreq, 0, sizeof(mreq));
if (len < sizeof(struct packet_mreq))
return -EINVAL;
if (len > sizeof(mreq))
len = sizeof(mreq);
if (copy_from_sockptr(&mreq, optval, len))
return -EFAULT;
if (len < (mreq.mr_alen + offsetof(struct packet_mreq, mr_address)))
return -EINVAL;
if (optname == PACKET_ADD_MEMBERSHIP)
ret = packet_mc_add(sk, &mreq);
else
ret = packet_mc_drop(sk, &mreq);
return ret;
}
case PACKET_RX_RING:
case PACKET_TX_RING:
{
union tpacket_req_u req_u;
int len;
net: af_packet: fix race in PACKET_{R|T}X_RING In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 08:52:04 +08:00
lock_sock(sk);
switch (po->tp_version) {
case TPACKET_V1:
case TPACKET_V2:
len = sizeof(req_u.req);
break;
case TPACKET_V3:
default:
len = sizeof(req_u.req3);
break;
}
net: af_packet: fix race in PACKET_{R|T}X_RING In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 08:52:04 +08:00
if (optlen < len) {
ret = -EINVAL;
} else {
if (copy_from_sockptr(&req_u.req, optval, len))
net: af_packet: fix race in PACKET_{R|T}X_RING In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 08:52:04 +08:00
ret = -EFAULT;
else
ret = packet_set_ring(sk, &req_u, 0,
optname == PACKET_TX_RING);
}
release_sock(sk);
return ret;
}
case PACKET_COPY_THRESH:
{
int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
pkt_sk(sk)->copy_thresh = val;
return 0;
}
case PACKET_VERSION:
{
int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
switch (val) {
case TPACKET_V1:
case TPACKET_V2:
case TPACKET_V3:
break;
default:
return -EINVAL;
}
lock_sock(sk);
if (po->rx_ring.pg_vec || po->tx_ring.pg_vec) {
ret = -EBUSY;
} else {
po->tp_version = val;
ret = 0;
}
release_sock(sk);
return ret;
}
case PACKET_RESERVE:
{
unsigned int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
if (val > INT_MAX)
return -EINVAL;
lock_sock(sk);
if (po->rx_ring.pg_vec || po->tx_ring.pg_vec) {
ret = -EBUSY;
} else {
po->tp_reserve = val;
ret = 0;
}
release_sock(sk);
return ret;
}
case PACKET_LOSS:
{
unsigned int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
lock_sock(sk);
if (po->rx_ring.pg_vec || po->tx_ring.pg_vec) {
ret = -EBUSY;
} else {
po->tp_loss = !!val;
ret = 0;
}
release_sock(sk);
return ret;
}
case PACKET_AUXDATA:
{
int val;
if (optlen < sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
lock_sock(sk);
po->auxdata = !!val;
release_sock(sk);
return 0;
}
case PACKET_ORIGDEV:
{
int val;
if (optlen < sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
lock_sock(sk);
po->origdev = !!val;
release_sock(sk);
return 0;
}
case PACKET_VNET_HDR:
{
int val;
if (sock->type != SOCK_RAW)
return -EINVAL;
if (optlen < sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
lock_sock(sk);
if (po->rx_ring.pg_vec || po->tx_ring.pg_vec) {
ret = -EBUSY;
} else {
po->has_vnet_hdr = !!val;
ret = 0;
}
release_sock(sk);
return ret;
}
case PACKET_TIMESTAMP:
{
int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
po->tp_tstamp = val;
return 0;
}
case PACKET_FANOUT:
{
struct fanout_args args = { 0 };
if (optlen != sizeof(int) && optlen != sizeof(args))
return -EINVAL;
if (copy_from_sockptr(&args, optval, optlen))
return -EFAULT;
return fanout_add(sk, &args);
}
case PACKET_FANOUT_DATA:
{
if (!po->fanout)
return -EINVAL;
return fanout_set_data(po, optval, optlen);
}
case PACKET_IGNORE_OUTGOING:
{
int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
if (val < 0 || val > 1)
return -EINVAL;
po->prot_hook.ignore_outgoing = !!val;
return 0;
}
case PACKET_TX_HAS_OFF:
{
unsigned int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
return -EFAULT;
lock_sock(sk);
if (!po->rx_ring.pg_vec && !po->tx_ring.pg_vec)
po->tp_tx_has_off = !!val;
release_sock(sk);
return 0;
}
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
case PACKET_QDISC_BYPASS:
{
int val;
if (optlen != sizeof(val))
return -EINVAL;
if (copy_from_sockptr(&val, optval, sizeof(val)))
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
return -EFAULT;
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
default:
return -ENOPROTOOPT;
}
}
static int packet_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
int len;
int val, lv = sizeof(val);
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
void *data = &val;
union tpacket_stats_u st;
struct tpacket_rollover_stats rstats;
int drops;
if (level != SOL_PACKET)
return -ENOPROTOOPT;
if (get_user(len, optlen))
return -EFAULT;
if (len < 0)
return -EINVAL;
switch (optname) {
case PACKET_STATISTICS:
spin_lock_bh(&sk->sk_receive_queue.lock);
memcpy(&st, &po->stats, sizeof(st));
memset(&po->stats, 0, sizeof(po->stats));
spin_unlock_bh(&sk->sk_receive_queue.lock);
drops = atomic_xchg(&po->tp_drops, 0);
if (po->tp_version == TPACKET_V3) {
lv = sizeof(struct tpacket_stats_v3);
st.stats3.tp_drops = drops;
st.stats3.tp_packets += drops;
data = &st.stats3;
} else {
lv = sizeof(struct tpacket_stats);
st.stats1.tp_drops = drops;
st.stats1.tp_packets += drops;
data = &st.stats1;
}
break;
case PACKET_AUXDATA:
val = po->auxdata;
break;
case PACKET_ORIGDEV:
val = po->origdev;
break;
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;
case PACKET_VERSION:
val = po->tp_version;
break;
case PACKET_HDRLEN:
if (len > sizeof(int))
len = sizeof(int);
if (len < sizeof(int))
return -EINVAL;
if (copy_from_user(&val, optval, len))
return -EFAULT;
switch (val) {
case TPACKET_V1:
val = sizeof(struct tpacket_hdr);
break;
case TPACKET_V2:
val = sizeof(struct tpacket2_hdr);
break;
case TPACKET_V3:
val = sizeof(struct tpacket3_hdr);
break;
default:
return -EINVAL;
}
break;
case PACKET_RESERVE:
val = po->tp_reserve;
break;
case PACKET_LOSS:
val = po->tp_loss;
break;
case PACKET_TIMESTAMP:
val = po->tp_tstamp;
break;
case PACKET_FANOUT:
val = (po->fanout ?
((u32)po->fanout->id |
packet: packet fanout rollover during socket overload Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
((u32)po->fanout->type << 16) |
((u32)po->fanout->flags << 24)) :
0);
break;
case PACKET_IGNORE_OUTGOING:
val = po->prot_hook.ignore_outgoing;
break;
case PACKET_ROLLOVER_STATS:
packet: fix crash in fanout_demux_rollover() syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28 23:44:29 +08:00
if (!po->rollover)
return -EINVAL;
packet: fix crash in fanout_demux_rollover() syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28 23:44:29 +08:00
rstats.tp_all = atomic_long_read(&po->rollover->num);
rstats.tp_huge = atomic_long_read(&po->rollover->num_huge);
rstats.tp_failed = atomic_long_read(&po->rollover->num_failed);
data = &rstats;
lv = sizeof(rstats);
break;
case PACKET_TX_HAS_OFF:
val = po->tp_tx_has_off;
break;
packet: introduce PACKET_QDISC_BYPASS socket option This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 18:36:17 +08:00
case PACKET_QDISC_BYPASS:
val = packet_use_direct_xmit(po);
break;
default:
return -ENOPROTOOPT;
}
if (len > lv)
len = lv;
if (put_user(len, optlen))
return -EFAULT;
if (copy_to_user(optval, data, len))
return -EFAULT;
return 0;
}
static int packet_notifier(struct notifier_block *this,
unsigned long msg, void *ptr)
{
struct sock *sk;
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct net *net = dev_net(dev);
rcu_read_lock();
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
sk_for_each_rcu(sk, &net->packet.sklist) {
struct packet_sock *po = pkt_sk(sk);
switch (msg) {
case NETDEV_UNREGISTER:
if (po->mclist)
packet_dev_mclist_delete(dev, &po->mclist);
fallthrough;
case NETDEV_DOWN:
if (dev->ifindex == po->ifindex) {
spin_lock(&po->bind_lock);
if (po->running) {
__unregister_prot_hook(sk, false);
sk->sk_err = ENETDOWN;
if (!sock_flag(sk, SOCK_DEAD))
sk_error_report(sk);
}
if (msg == NETDEV_UNREGISTER) {
packet_cached_dev_reset(po);
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
WRITE_ONCE(po->ifindex, -1);
if (po->prot_hook.dev)
dev_put(po->prot_hook.dev);
po->prot_hook.dev = NULL;
}
spin_unlock(&po->bind_lock);
}
break;
case NETDEV_UP:
if (dev->ifindex == po->ifindex) {
spin_lock(&po->bind_lock);
if (po->num)
register_prot_hook(sk);
spin_unlock(&po->bind_lock);
}
break;
}
}
rcu_read_unlock();
return NOTIFY_DONE;
}
static int packet_ioctl(struct socket *sock, unsigned int cmd,
unsigned long arg)
{
struct sock *sk = sock->sk;
switch (cmd) {
case SIOCOUTQ:
{
int amount = sk_wmem_alloc_get(sk);
return put_user(amount, (int __user *)arg);
}
case SIOCINQ:
{
struct sk_buff *skb;
int amount = 0;
spin_lock_bh(&sk->sk_receive_queue.lock);
skb = skb_peek(&sk->sk_receive_queue);
if (skb)
amount = skb->len;
spin_unlock_bh(&sk->sk_receive_queue.lock);
return put_user(amount, (int __user *)arg);
}
#ifdef CONFIG_INET
case SIOCADDRT:
case SIOCDELRT:
case SIOCDARP:
case SIOCGARP:
case SIOCSARP:
case SIOCGIFADDR:
case SIOCSIFADDR:
case SIOCGIFBRDADDR:
case SIOCSIFBRDADDR:
case SIOCGIFNETMASK:
case SIOCSIFNETMASK:
case SIOCGIFDSTADDR:
case SIOCSIFDSTADDR:
case SIOCSIFFLAGS:
return inet_dgram_ops.ioctl(sock, cmd, arg);
#endif
default:
return -ENOIOCTLCMD;
}
return 0;
}
static __poll_t packet_poll(struct file *file, struct socket *sock,
poll_table *wait)
{
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
__poll_t mask = datagram_poll(file, sock, wait);
spin_lock_bh(&sk->sk_receive_queue.lock);
if (po->rx_ring.pg_vec) {
if (!packet_previous_rx_frame(po, &po->rx_ring,
TP_STATUS_KERNEL))
mask |= EPOLLIN | EPOLLRDNORM;
}
packet_rcv_try_clear_pressure(po);
spin_unlock_bh(&sk->sk_receive_queue.lock);
spin_lock_bh(&sk->sk_write_queue.lock);
if (po->tx_ring.pg_vec) {
if (packet_current_frame(po, &po->tx_ring, TP_STATUS_AVAILABLE))
mask |= EPOLLOUT | EPOLLWRNORM;
}
spin_unlock_bh(&sk->sk_write_queue.lock);
return mask;
}
/* Dirty? Well, I still did not learn better way to account
* for user mmaps.
*/
static void packet_mm_open(struct vm_area_struct *vma)
{
struct file *file = vma->vm_file;
struct socket *sock = file->private_data;
struct sock *sk = sock->sk;
if (sk)
atomic_inc(&pkt_sk(sk)->mapped);
}
static void packet_mm_close(struct vm_area_struct *vma)
{
struct file *file = vma->vm_file;
struct socket *sock = file->private_data;
struct sock *sk = sock->sk;
if (sk)
atomic_dec(&pkt_sk(sk)->mapped);
}
static const struct vm_operations_struct packet_mmap_ops = {
.open = packet_mm_open,
.close = packet_mm_close,
};
static void free_pg_vec(struct pgv *pg_vec, unsigned int order,
unsigned int len)
{
int i;
for (i = 0; i < len; i++) {
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
if (likely(pg_vec[i].buffer)) {
if (is_vmalloc_addr(pg_vec[i].buffer))
vfree(pg_vec[i].buffer);
else
free_pages((unsigned long)pg_vec[i].buffer,
order);
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
pg_vec[i].buffer = NULL;
}
}
kfree(pg_vec);
}
static char *alloc_one_pg_vec_page(unsigned long order)
{
char *buffer;
gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP |
__GFP_ZERO | __GFP_NOWARN | __GFP_NORETRY;
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
buffer = (char *) __get_free_pages(gfp_flags, order);
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
if (buffer)
return buffer;
/* __get_free_pages failed, fall back to vmalloc */
buffer = vzalloc(array_size((1 << order), PAGE_SIZE));
if (buffer)
return buffer;
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
/* vmalloc failed, lets dig into swap here */
gfp_flags &= ~__GFP_NORETRY;
buffer = (char *) __get_free_pages(gfp_flags, order);
if (buffer)
return buffer;
/* complete and utter failure */
return NULL;
}
static struct pgv *alloc_pg_vec(struct tpacket_req *req, int order)
{
unsigned int block_nr = req->tp_block_nr;
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
struct pgv *pg_vec;
int i;
net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec Since commit fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check") one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller found that that triggers a warning: [ 21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0 [ 21.101490] Modules linked in: [ 21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146 [ 21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630 [ 21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3 [ 21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246 [ 21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000 [ 21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000 [ 21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67 [ 21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d [ 21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d [ 21.112552] FS: 00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000 [ 21.113612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0 [ 21.115367] Call Trace: [ 21.115705] ? __alloc_pages_slowpath+0x21c0/0x21c0 [ 21.116362] alloc_pages_current+0xac/0x1e0 [ 21.116923] kmalloc_order+0x18/0x70 [ 21.117393] kmalloc_order_trace+0x18/0x110 [ 21.117949] packet_set_ring+0x9d5/0x1770 [ 21.118524] ? packet_rcv_spkt+0x440/0x440 [ 21.119094] ? lock_downgrade+0x620/0x620 [ 21.119646] ? __might_fault+0x177/0x1b0 [ 21.120177] packet_setsockopt+0x981/0x2940 [ 21.120753] ? __fget+0x2fb/0x4b0 [ 21.121209] ? packet_release+0xab0/0xab0 [ 21.121740] ? sock_has_perm+0x1cd/0x260 [ 21.122297] ? selinux_secmark_relabel_packet+0xd0/0xd0 [ 21.123013] ? __fget+0x324/0x4b0 [ 21.123451] ? selinux_netlbl_socket_setsockopt+0x101/0x320 [ 21.124186] ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0 [ 21.124908] ? __lock_acquire+0x529/0x3200 [ 21.125453] ? selinux_socket_setsockopt+0x5d/0x70 [ 21.126075] ? __sys_setsockopt+0x131/0x210 [ 21.126533] ? packet_release+0xab0/0xab0 [ 21.127004] __sys_setsockopt+0x131/0x210 [ 21.127449] ? kernel_accept+0x2f0/0x2f0 [ 21.127911] ? ret_from_fork+0x8/0x50 [ 21.128313] ? do_raw_spin_lock+0x11b/0x280 [ 21.128800] __x64_sys_setsockopt+0xba/0x150 [ 21.129271] ? lockdep_hardirqs_on+0x37f/0x560 [ 21.129769] do_syscall_64+0x9f/0x450 [ 21.130182] entry_SYSCALL_64_after_hwframe+0x49/0xbe We should allocate with __GFP_NOWARN to handle this. Cc: Kal Conley <kal.conley@dectris.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 14:14:52 +08:00
pg_vec = kcalloc(block_nr, sizeof(struct pgv), GFP_KERNEL | __GFP_NOWARN);
if (unlikely(!pg_vec))
goto out;
for (i = 0; i < block_nr; i++) {
pg_vec[i].buffer = alloc_one_pg_vec_page(order);
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
if (unlikely(!pg_vec[i].buffer))
goto out_free_pgvec;
}
out:
return pg_vec;
out_free_pgvec:
free_pg_vec(pg_vec, order, block_nr);
pg_vec = NULL;
goto out;
}
static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u,
int closing, int tx_ring)
{
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
struct pgv *pg_vec = NULL;
struct packet_sock *po = pkt_sk(sk);
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
unsigned long *rx_owner_map = NULL;
int was_running, order = 0;
struct packet_ring_buffer *rb;
struct sk_buff_head *rb_queue;
__be16 num;
int err;
/* Added to avoid minimal code churn */
struct tpacket_req *req = &req_u->req;
rb = tx_ring ? &po->tx_ring : &po->rx_ring;
rb_queue = tx_ring ? &sk->sk_write_queue : &sk->sk_receive_queue;
err = -EBUSY;
if (!closing) {
if (atomic_read(&po->mapped))
goto out;
packet: use percpu mmap tx frame pending refcount In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
if (packet_read_pending(rb))
goto out;
}
if (req->tp_block_nr) {
unsigned int min_frame_size;
/* Sanity tests and some calculations */
err = -EBUSY;
if (unlikely(rb->pg_vec))
goto out;
switch (po->tp_version) {
case TPACKET_V1:
po->tp_hdrlen = TPACKET_HDRLEN;
break;
case TPACKET_V2:
po->tp_hdrlen = TPACKET2_HDRLEN;
break;
case TPACKET_V3:
po->tp_hdrlen = TPACKET3_HDRLEN;
break;
}
err = -EINVAL;
if (unlikely((int)req->tp_block_size <= 0))
goto out;
if (unlikely(!PAGE_ALIGNED(req->tp_block_size)))
goto out;
min_frame_size = po->tp_hdrlen + po->tp_reserve;
if (po->tp_version >= TPACKET_V3 &&
req->tp_block_size <
BLK_PLUS_PRIV((u64)req_u->req3.tp_sizeof_priv) + min_frame_size)
goto out;
if (unlikely(req->tp_frame_size < min_frame_size))
goto out;
if (unlikely(req->tp_frame_size & (TPACKET_ALIGNMENT - 1)))
goto out;
rb->frames_per_block = req->tp_block_size / req->tp_frame_size;
if (unlikely(rb->frames_per_block == 0))
goto out;
if (unlikely(rb->frames_per_block > UINT_MAX / req->tp_block_nr))
goto out;
if (unlikely((rb->frames_per_block * req->tp_block_nr) !=
req->tp_frame_nr))
goto out;
err = -ENOMEM;
order = get_order(req->tp_block_size);
pg_vec = alloc_pg_vec(req, order);
if (unlikely(!pg_vec))
goto out;
switch (po->tp_version) {
case TPACKET_V3:
/* Block transmit is not supported yet */
if (!tx_ring) {
init_prb_bdqc(po, rb, pg_vec, req_u);
} else {
struct tpacket_req3 *req3 = &req_u->req3;
if (req3->tp_retire_blk_tov ||
req3->tp_sizeof_priv ||
req3->tp_feature_req_word) {
err = -EINVAL;
goto out_free_pg_vec;
}
}
break;
default:
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
if (!tx_ring) {
rx_owner_map = bitmap_alloc(req->tp_frame_nr,
GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO);
if (!rx_owner_map)
goto out_free_pg_vec;
}
break;
}
}
/* Done */
else {
err = -EINVAL;
if (unlikely(req->tp_frame_nr))
goto out;
}
/* Detach socket from network */
spin_lock(&po->bind_lock);
was_running = po->running;
num = po->num;
if (was_running) {
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
WRITE_ONCE(po->num, 0);
__unregister_prot_hook(sk, false);
}
spin_unlock(&po->bind_lock);
synchronize_net();
err = -EBUSY;
mutex_lock(&po->pg_vec_lock);
if (closing || atomic_read(&po->mapped) == 0) {
err = 0;
spin_lock_bh(&rb_queue->lock);
swap(rb->pg_vec, pg_vec);
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
if (po->tp_version <= TPACKET_V2)
swap(rb->rx_owner_map, rx_owner_map);
rb->frame_max = (req->tp_frame_nr - 1);
rb->head = 0;
rb->frame_size = req->tp_frame_size;
spin_unlock_bh(&rb_queue->lock);
swap(rb->pg_vec_order, order);
swap(rb->pg_vec_len, req->tp_block_nr);
rb->pg_vec_pages = req->tp_block_size/PAGE_SIZE;
po->prot_hook.func = (po->rx_ring.pg_vec) ?
tpacket_rcv : packet_rcv;
skb_queue_purge(rb_queue);
if (atomic_read(&po->mapped))
pr_err("packet_mmap: vma is busy: %d\n",
atomic_read(&po->mapped));
}
mutex_unlock(&po->pg_vec_lock);
spin_lock(&po->bind_lock);
if (was_running) {
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
WRITE_ONCE(po->num, num);
register_prot_hook(sk);
}
spin_unlock(&po->bind_lock);
packet: fix use-after-free in prb_retire_rx_blk_timer_expired() There are multiple reports showing we have a use-after-free in the timer prb_retire_rx_blk_timer_expired(), where we use struct tpacket_kbdq_core::pkbdq, a pg_vec, after it gets freed by free_pg_vec(). The interesting part is it is not freed via packet_release() but via packet_setsockopt(), which means we are not closing the socket. Looking into the big and fat function packet_set_ring(), this could happen if we satisfy the following conditions: 1. closing == 0, not on packet_release() path 2. req->tp_block_nr == 0, we don't allocate a new pg_vec 3. rx_ring->pg_vec is already set as V3, which means we already called packet_set_ring() wtih req->tp_block_nr > 0 previously 4. req->tp_frame_nr == 0, pass sanity check 5. po->mapped == 0, never called mmap() In this scenario we are clearing the old rx_ring->pg_vec, so we need to free this pg_vec, but we don't stop the timer on this path because of closing==0. The timer has to be stopped as long as we need to free pg_vec, therefore the check on closing!=0 is wrong, we should check pg_vec!=NULL instead. Thanks to liujian for testing different fixes. Reported-by: alexander.levin@verizon.com Reported-by: Dave Jones <davej@codemonkey.org.uk> Reported-by: liujian (CE) <liujian56@huawei.com> Tested-by: liujian (CE) <liujian56@huawei.com> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 01:07:32 +08:00
if (pg_vec && (po->tp_version > TPACKET_V2)) {
/* Because we don't support block-based V3 on tx-ring */
if (!tx_ring)
prb_shutdown_retire_blk_timer(po, rb_queue);
}
out_free_pg_vec:
net/packet: tpacket_rcv: avoid a producer race condition PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html Suggested-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jon Rosen <jrosen@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
bitmap_free(rx_owner_map);
if (pg_vec)
free_pg_vec(pg_vec, order, req->tp_block_nr);
out:
return err;
}
static int packet_mmap(struct file *file, struct socket *sock,
struct vm_area_struct *vma)
{
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
unsigned long size, expected_size;
struct packet_ring_buffer *rb;
unsigned long start;
int err = -EINVAL;
int i;
if (vma->vm_pgoff)
return -EINVAL;
mutex_lock(&po->pg_vec_lock);
expected_size = 0;
for (rb = &po->rx_ring; rb <= &po->tx_ring; rb++) {
if (rb->pg_vec) {
expected_size += rb->pg_vec_len
* rb->pg_vec_pages
* PAGE_SIZE;
}
}
if (expected_size == 0)
goto out;
size = vma->vm_end - vma->vm_start;
if (size != expected_size)
goto out;
start = vma->vm_start;
for (rb = &po->rx_ring; rb <= &po->tx_ring; rb++) {
if (rb->pg_vec == NULL)
continue;
for (i = 0; i < rb->pg_vec_len; i++) {
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
struct page *page;
void *kaddr = rb->pg_vec[i].buffer;
int pg_num;
for (pg_num = 0; pg_num < rb->pg_vec_pages; pg_num++) {
page = pgv_to_page(kaddr);
err = vm_insert_page(vma, start, page);
if (unlikely(err))
goto out;
start += PAGE_SIZE;
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 02:26:47 +08:00
kaddr += PAGE_SIZE;
}
}
}
atomic_inc(&po->mapped);
vma->vm_ops = &packet_mmap_ops;
err = 0;
out:
mutex_unlock(&po->pg_vec_lock);
return err;
}
static const struct proto_ops packet_ops_spkt = {
.family = PF_PACKET,
.owner = THIS_MODULE,
.release = packet_release,
.bind = packet_bind_spkt,
.connect = sock_no_connect,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = packet_getname_spkt,
.poll = datagram_poll,
.ioctl = packet_ioctl,
.gettstamp = sock_gettstamp,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.sendmsg = packet_sendmsg_spkt,
.recvmsg = packet_recvmsg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage,
};
static const struct proto_ops packet_ops = {
.family = PF_PACKET,
.owner = THIS_MODULE,
.release = packet_release,
.bind = packet_bind,
.connect = sock_no_connect,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = packet_getname,
.poll = packet_poll,
.ioctl = packet_ioctl,
.gettstamp = sock_gettstamp,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.setsockopt = packet_setsockopt,
.getsockopt = packet_getsockopt,
.sendmsg = packet_sendmsg,
.recvmsg = packet_recvmsg,
.mmap = packet_mmap,
.sendpage = sock_no_sendpage,
};
static const struct net_proto_family packet_family_ops = {
.family = PF_PACKET,
.create = packet_create,
.owner = THIS_MODULE,
};
static struct notifier_block packet_netdev_notifier = {
.notifier_call = packet_notifier,
};
#ifdef CONFIG_PROC_FS
static void *packet_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(RCU)
{
struct net *net = seq_file_net(seq);
rcu_read_lock();
return seq_hlist_start_head_rcu(&net->packet.sklist, *pos);
}
static void *packet_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct net *net = seq_file_net(seq);
return seq_hlist_next_rcu(v, &net->packet.sklist, pos);
}
static void packet_seq_stop(struct seq_file *seq, void *v)
__releases(RCU)
{
rcu_read_unlock();
}
static int packet_seq_show(struct seq_file *seq, void *v)
{
if (v == SEQ_START_TOKEN)
seq_printf(seq,
"%*sRefCnt Type Proto Iface R Rmem User Inode\n",
IS_ENABLED(CONFIG_64BIT) ? -17 : -9, "sk");
else {
struct sock *s = sk_entry(v);
const struct packet_sock *po = pkt_sk(s);
seq_printf(seq,
net: convert %p usage to %pK The %pK format specifier is designed to hide exposed kernel pointers, specifically via /proc interfaces. Exposing these pointers provides an easy target for kernel write vulnerabilities, since they reveal the locations of writable structures containing easily triggerable function pointers. The behavior of %pK depends on the kptr_restrict sysctl. If kptr_restrict is set to 0, no deviation from the standard %p behavior occurs. If kptr_restrict is set to 1, the default, if the current user (intended to be a reader via seq_printf(), etc.) does not have CAP_SYSLOG (currently in the LSM tree), kernel pointers using %pK are printed as 0's. If kptr_restrict is set to 2, kernel pointers using %pK are printed as 0's regardless of privileges. Replacing with 0's was chosen over the default "(null)", which cannot be parsed by userland %p, which expects "(nil)". The supporting code for kptr_restrict and %pK are currently in the -mm tree. This patch converts users of %p in net/ to %pK. Cases of printing pointers to the syslog are not covered, since this would eliminate useful information for postmortem debugging and the reading of the syslog is already optionally protected by the dmesg_restrict sysctl. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: James Morris <jmorris@namei.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Thomas Graf <tgraf@infradead.org> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Kees Cook <kees.cook@canonical.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23 20:17:35 +08:00
"%pK %-6d %-4d %04x %-5d %1d %-6u %-6u %-6lu\n",
s,
refcount_read(&s->sk_refcnt),
s->sk_type,
net/packet: annotate accesses to po->bind tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:01 +08:00
ntohs(READ_ONCE(po->num)),
net/packet: annotate accesses to po->ifindex Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 21:42:02 +08:00
READ_ONCE(po->ifindex),
po->running,
atomic_read(&s->sk_rmem_alloc),
from_kuid_munged(seq_user_ns(seq), sock_i_uid(s)),
sock_i_ino(s));
}
return 0;
}
static const struct seq_operations packet_seq_ops = {
.start = packet_seq_start,
.next = packet_seq_next,
.stop = packet_seq_stop,
.show = packet_seq_show,
};
#endif
static int __net_init packet_net_init(struct net *net)
{
packet: Protect packet sk list with mutex (v2) Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 09:06:47 +08:00
mutex_init(&net->packet.sklist_lock);
INIT_HLIST_HEAD(&net->packet.sklist);
#ifdef CONFIG_PROC_FS
if (!proc_create_net("packet", 0, net->proc_net, &packet_seq_ops,
sizeof(struct seq_net_private)))
return -ENOMEM;
#endif /* CONFIG_PROC_FS */
return 0;
}
static void __net_exit packet_net_exit(struct net *net)
{
remove_proc_entry("packet", net->proc_net);
WARN_ON_ONCE(!hlist_empty(&net->packet.sklist));
}
static struct pernet_operations packet_net_ops = {
.init = packet_net_init,
.exit = packet_net_exit,
};
static void __exit packet_exit(void)
{
unregister_netdevice_notifier(&packet_netdev_notifier);
unregister_pernet_subsys(&packet_net_ops);
sock_unregister(PF_PACKET);
proto_unregister(&packet_proto);
}
static int __init packet_init(void)
{
packet: Fix error path in packet_init kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09 22:52:20 +08:00
int rc;
packet: Fix error path in packet_init kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09 22:52:20 +08:00
rc = proto_register(&packet_proto, 0);
if (rc)
goto out;
packet: Fix error path in packet_init kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09 22:52:20 +08:00
rc = sock_register(&packet_family_ops);
if (rc)
goto out_proto;
rc = register_pernet_subsys(&packet_net_ops);
if (rc)
goto out_sock;
rc = register_netdevice_notifier(&packet_netdev_notifier);
if (rc)
goto out_pernet;
packet: Fix error path in packet_init kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09 22:52:20 +08:00
return 0;
out_pernet:
unregister_pernet_subsys(&packet_net_ops);
out_sock:
sock_unregister(PF_PACKET);
out_proto:
proto_unregister(&packet_proto);
out:
return rc;
}
module_init(packet_init);
module_exit(packet_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_PACKET);