UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/mmc/core/pwrseq.c

119 lines
2.3 KiB
C
Raw Normal View History

mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
/*
* Copyright (C) 2014 Linaro Ltd
*
* Author: Ulf Hansson <ulf.hansson@linaro.org>
*
* License terms: GNU General Public License (GPL) version 2
*
* MMC power sequence management
*/
mmc: pwrseq: Initial support for the simple MMC power sequence provider To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-12-05 21:36:58 +08:00
#include <linux/kernel.h>
#include <linux/err.h>
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
#include <linux/module.h>
mmc: pwrseq: Initial support for the simple MMC power sequence provider To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-12-05 21:36:58 +08:00
#include <linux/of.h>
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
#include <linux/mmc/host.h>
#include "pwrseq.h"
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
static DEFINE_MUTEX(pwrseq_list_mutex);
static LIST_HEAD(pwrseq_list);
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
int mmc_pwrseq_alloc(struct mmc_host *host)
{
mmc: pwrseq: Initial support for the simple MMC power sequence provider To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-12-05 21:36:58 +08:00
struct device_node *np;
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
struct mmc_pwrseq *p;
mmc: pwrseq: Initial support for the simple MMC power sequence provider To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-12-05 21:36:58 +08:00
np = of_parse_phandle(host->parent->of_node, "mmc-pwrseq", 0);
if (!np)
return 0;
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
mutex_lock(&pwrseq_list_mutex);
list_for_each_entry(p, &pwrseq_list, pwrseq_node) {
if (p->dev->of_node == np) {
if (!try_module_get(p->owner))
dev_err(host->parent,
"increasing module refcount failed\n");
else
host->pwrseq = p;
mmc: pwrseq: Initial support for the simple MMC power sequence provider To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-12-05 21:36:58 +08:00
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
break;
}
mmc: pwrseq: Initial support for the simple MMC power sequence provider To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-12-05 21:36:58 +08:00
}
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
of_node_put(np);
mutex_unlock(&pwrseq_list_mutex);
if (!host->pwrseq)
return -EPROBE_DEFER;
mmc: pwrseq: simplify alloc/free hooks The alloc() and free() hooks required each pwrseq implementation to set host->pwrseq themselves. This is error-prone and could be done at a higher level if alloc() was changed to return a pointer to a struct mmc_pwrseq instead of an error code. This patch performs this change and moves the burden of maintaining host->pwrseq from the power sequence hooks to the pwrseq code. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-02-12 12:36:11 +08:00
dev_info(host->parent, "allocated mmc-pwrseq\n");
mmc: pwrseq: Initial support for the simple MMC power sequence provider To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-12-05 21:36:58 +08:00
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
return 0;
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
}
void mmc_pwrseq_pre_power_on(struct mmc_host *host)
{
struct mmc_pwrseq *pwrseq = host->pwrseq;
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
if (pwrseq && pwrseq->ops->pre_power_on)
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
pwrseq->ops->pre_power_on(host);
}
void mmc_pwrseq_post_power_on(struct mmc_host *host)
{
struct mmc_pwrseq *pwrseq = host->pwrseq;
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
if (pwrseq && pwrseq->ops->post_power_on)
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
pwrseq->ops->post_power_on(host);
}
void mmc_pwrseq_power_off(struct mmc_host *host)
{
struct mmc_pwrseq *pwrseq = host->pwrseq;
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
if (pwrseq && pwrseq->ops->power_off)
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
pwrseq->ops->power_off(host);
}
mmc: pwrseq: Add reset callback to the struct mmc_pwrseq_ops The ->reset() callback is needed to implement a better support for eMMC HW reset. The following changes will take advantage of the new callback. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2017-05-09 05:49:12 +08:00
void mmc_pwrseq_reset(struct mmc_host *host)
{
struct mmc_pwrseq *pwrseq = host->pwrseq;
if (pwrseq && pwrseq->ops->reset)
pwrseq->ops->reset(host);
}
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
void mmc_pwrseq_free(struct mmc_host *host)
{
struct mmc_pwrseq *pwrseq = host->pwrseq;
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
if (pwrseq) {
module_put(pwrseq->owner);
host->pwrseq = NULL;
}
}
int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq)
{
if (!pwrseq || !pwrseq->ops || !pwrseq->dev)
return -EINVAL;
mmc: pwrseq: simplify alloc/free hooks The alloc() and free() hooks required each pwrseq implementation to set host->pwrseq themselves. This is error-prone and could be done at a higher level if alloc() was changed to return a pointer to a struct mmc_pwrseq instead of an error code. This patch performs this change and moves the burden of maintaining host->pwrseq from the power sequence hooks to the pwrseq code. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-02-12 12:36:11 +08:00
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
mutex_lock(&pwrseq_list_mutex);
list_add(&pwrseq->pwrseq_node, &pwrseq_list);
mutex_unlock(&pwrseq_list_mutex);
return 0;
}
EXPORT_SYMBOL_GPL(mmc_pwrseq_register);
void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq)
{
if (pwrseq) {
mutex_lock(&pwrseq_list_mutex);
list_del(&pwrseq->pwrseq_node);
mutex_unlock(&pwrseq_list_mutex);
}
mmc: core: Initial support for MMC power sequences System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2014-11-28 21:38:36 +08:00
}
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
EXPORT_SYMBOL_GPL(mmc_pwrseq_unregister);