UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/mfd/qcom_rpm.c

713 lines
24 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29 22:17:58 +08:00
// SPDX-License-Identifier: GPL-2.0-only
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
/*
* Copyright (c) 2014, Sony Mobile Communications AB.
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
* Author: Bjorn Andersson <bjorn.andersson@sonymobile.com>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/mfd/qcom_rpm.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
mfd: qcom_rpm: Handle message RAM clock The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock to the message RAM used by the RPM. This needs to be enabled for messages to pass through. This is a crude solution that simply prepare/enable at probe() and disable/unprepare at remove(). More elaborate PM is probably possible to add later. The construction uses IS_ERR() to gracefully handle the platforms that do not provide a message RAM clock. It will bail out of probe only if the clock is hitting a probe deferral situation. Of course this requires the proper device tree set-up: rpm: rpm@104000 { compatible = "qcom,rpm-msm8660"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; ... }; I have provided this in the MSM8660 device tree, and will provide patches for the other targets. Cc: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-19 02:40:45 +08:00
#include <linux/clk.h>
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
#include <dt-bindings/mfd/qcom-rpm.h>
struct qcom_rpm_resource {
unsigned target_id;
unsigned status_id;
unsigned select_id;
unsigned size;
};
struct qcom_rpm_data {
u32 version;
const struct qcom_rpm_resource *resource_table;
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
unsigned int n_resources;
unsigned int req_ctx_off;
unsigned int req_sel_off;
unsigned int ack_ctx_off;
unsigned int ack_sel_off;
mfd: qcom_rpm: Parametrize also ack selector size The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-22 14:27:17 +08:00
unsigned int req_sel_size;
unsigned int ack_sel_size;
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
};
struct qcom_rpm {
struct device *dev;
struct regmap *ipc_regmap;
unsigned ipc_offset;
unsigned ipc_bit;
mfd: qcom_rpm: Handle message RAM clock The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock to the message RAM used by the RPM. This needs to be enabled for messages to pass through. This is a crude solution that simply prepare/enable at probe() and disable/unprepare at remove(). More elaborate PM is probably possible to add later. The construction uses IS_ERR() to gracefully handle the platforms that do not provide a message RAM clock. It will bail out of probe only if the clock is hitting a probe deferral situation. Of course this requires the proper device tree set-up: rpm: rpm@104000 { compatible = "qcom,rpm-msm8660"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; ... }; I have provided this in the MSM8660 device tree, and will provide patches for the other targets. Cc: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-19 02:40:45 +08:00
struct clk *ramclk;
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
struct completion ack;
struct mutex lock;
void __iomem *status_regs;
void __iomem *ctrl_regs;
void __iomem *req_regs;
u32 ack_status;
const struct qcom_rpm_data *data;
};
#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
#define RPM_REQUEST_TIMEOUT (5 * HZ)
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
#define RPM_MAX_SEL_SIZE 7
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
#define RPM_NOTIFICATION BIT(30)
#define RPM_REJECTED BIT(31)
static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
[QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
[QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
[QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
[QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
[QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
[QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
[QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
[QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
[QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
[QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
[QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
[QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
[QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
[QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
[QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
[QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
[QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
[QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
[QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
[QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
[QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
[QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
[QCOM_RPM_PM8921_SMPS1] = { 116, 31, 30, 2 },
[QCOM_RPM_PM8921_SMPS2] = { 118, 33, 31, 2 },
[QCOM_RPM_PM8921_SMPS3] = { 120, 35, 32, 2 },
[QCOM_RPM_PM8921_SMPS4] = { 122, 37, 33, 2 },
[QCOM_RPM_PM8921_SMPS5] = { 124, 39, 34, 2 },
[QCOM_RPM_PM8921_SMPS6] = { 126, 41, 35, 2 },
[QCOM_RPM_PM8921_SMPS7] = { 128, 43, 36, 2 },
[QCOM_RPM_PM8921_SMPS8] = { 130, 45, 37, 2 },
[QCOM_RPM_PM8921_LDO1] = { 132, 47, 38, 2 },
[QCOM_RPM_PM8921_LDO2] = { 134, 49, 39, 2 },
[QCOM_RPM_PM8921_LDO3] = { 136, 51, 40, 2 },
[QCOM_RPM_PM8921_LDO4] = { 138, 53, 41, 2 },
[QCOM_RPM_PM8921_LDO5] = { 140, 55, 42, 2 },
[QCOM_RPM_PM8921_LDO6] = { 142, 57, 43, 2 },
[QCOM_RPM_PM8921_LDO7] = { 144, 59, 44, 2 },
[QCOM_RPM_PM8921_LDO8] = { 146, 61, 45, 2 },
[QCOM_RPM_PM8921_LDO9] = { 148, 63, 46, 2 },
[QCOM_RPM_PM8921_LDO10] = { 150, 65, 47, 2 },
[QCOM_RPM_PM8921_LDO11] = { 152, 67, 48, 2 },
[QCOM_RPM_PM8921_LDO12] = { 154, 69, 49, 2 },
[QCOM_RPM_PM8921_LDO13] = { 156, 71, 50, 2 },
[QCOM_RPM_PM8921_LDO14] = { 158, 73, 51, 2 },
[QCOM_RPM_PM8921_LDO15] = { 160, 75, 52, 2 },
[QCOM_RPM_PM8921_LDO16] = { 162, 77, 53, 2 },
[QCOM_RPM_PM8921_LDO17] = { 164, 79, 54, 2 },
[QCOM_RPM_PM8921_LDO18] = { 166, 81, 55, 2 },
[QCOM_RPM_PM8921_LDO19] = { 168, 83, 56, 2 },
[QCOM_RPM_PM8921_LDO20] = { 170, 85, 57, 2 },
[QCOM_RPM_PM8921_LDO21] = { 172, 87, 58, 2 },
[QCOM_RPM_PM8921_LDO22] = { 174, 89, 59, 2 },
[QCOM_RPM_PM8921_LDO23] = { 176, 91, 60, 2 },
[QCOM_RPM_PM8921_LDO24] = { 178, 93, 61, 2 },
[QCOM_RPM_PM8921_LDO25] = { 180, 95, 62, 2 },
[QCOM_RPM_PM8921_LDO26] = { 182, 97, 63, 2 },
[QCOM_RPM_PM8921_LDO27] = { 184, 99, 64, 2 },
[QCOM_RPM_PM8921_LDO28] = { 186, 101, 65, 2 },
[QCOM_RPM_PM8921_LDO29] = { 188, 103, 66, 2 },
[QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
[QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
[QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
[QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
[QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
[QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
[QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
[QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
[QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
[QCOM_RPM_PM8821_SMPS1] = { 201, 116, 76, 2 },
[QCOM_RPM_PM8821_SMPS2] = { 203, 118, 77, 2 },
[QCOM_RPM_PM8821_LDO1] = { 205, 120, 78, 2 },
[QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
[QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
[QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
[QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
[QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
mfd: qcom-rpm: Add apq8064 QDSS clock resource Qualcomm Debug Subsystem clock is used by CoreSight components. Add required definitions for it. qcom_rpm_resource::status_id is not used by driver, so just mark it as ~0. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-08 17:40:05 +08:00
[QCOM_RPM_QDSS_CLK] = { 214, ~0, 7, 1 },
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
[QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
};
static const struct qcom_rpm_data apq8064_template = {
.version = 3,
.resource_table = apq8064_rpm_resource_table,
.n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
.req_ctx_off = 3,
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
mfd: qcom_rpm: Parametrize also ack selector size The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-22 14:27:17 +08:00
.req_sel_size = 4,
.ack_sel_size = 7,
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
};
static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
[QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
[QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
[QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
[QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
[QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
[QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
[QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
[QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
[QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
[QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
[QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
[QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
[QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
[QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
[QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
[QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
[QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
[QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
[QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
[QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
[QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
[QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
[QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
[QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
[QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
[QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
[QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
[QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
[QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
[QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
[QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
[QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
[QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
[QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
[QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
[QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
[QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
[QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
[QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
[QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
[QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
[QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
[QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
[QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
[QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
[QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
[QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
[QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
[QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
[QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
[QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
[QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
[QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
[QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
[QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
[QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
[QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
[QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
[QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
[QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
[QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
[QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
[QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
[QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
[QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
[QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
[QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
[QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
[QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
[QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
[QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
[QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
[QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
[QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
};
static const struct qcom_rpm_data msm8660_template = {
.version = 2,
.resource_table = msm8660_rpm_resource_table,
.n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
.req_ctx_off = 3,
.req_sel_off = 11,
.ack_ctx_off = 19,
.ack_sel_off = 27,
mfd: qcom_rpm: Parametrize also ack selector size The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-22 14:27:17 +08:00
.req_sel_size = 7,
.ack_sel_size = 7,
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
};
static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
[QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
[QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
[QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
[QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
[QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
[QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
[QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
[QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
[QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
[QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
[QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
[QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
[QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
[QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
[QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
[QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
[QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
[QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
[QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
[QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
[QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
[QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
[QCOM_RPM_PM8921_SMPS1] = { 117, 31, 30, 2 },
[QCOM_RPM_PM8921_SMPS2] = { 119, 33, 31, 2 },
[QCOM_RPM_PM8921_SMPS3] = { 121, 35, 32, 2 },
[QCOM_RPM_PM8921_SMPS4] = { 123, 37, 33, 2 },
[QCOM_RPM_PM8921_SMPS5] = { 125, 39, 34, 2 },
[QCOM_RPM_PM8921_SMPS6] = { 127, 41, 35, 2 },
[QCOM_RPM_PM8921_SMPS7] = { 129, 43, 36, 2 },
[QCOM_RPM_PM8921_SMPS8] = { 131, 45, 37, 2 },
[QCOM_RPM_PM8921_LDO1] = { 133, 47, 38, 2 },
[QCOM_RPM_PM8921_LDO2] = { 135, 49, 39, 2 },
[QCOM_RPM_PM8921_LDO3] = { 137, 51, 40, 2 },
[QCOM_RPM_PM8921_LDO4] = { 139, 53, 41, 2 },
[QCOM_RPM_PM8921_LDO5] = { 141, 55, 42, 2 },
[QCOM_RPM_PM8921_LDO6] = { 143, 57, 43, 2 },
[QCOM_RPM_PM8921_LDO7] = { 145, 59, 44, 2 },
[QCOM_RPM_PM8921_LDO8] = { 147, 61, 45, 2 },
[QCOM_RPM_PM8921_LDO9] = { 149, 63, 46, 2 },
[QCOM_RPM_PM8921_LDO10] = { 151, 65, 47, 2 },
[QCOM_RPM_PM8921_LDO11] = { 153, 67, 48, 2 },
[QCOM_RPM_PM8921_LDO12] = { 155, 69, 49, 2 },
[QCOM_RPM_PM8921_LDO13] = { 157, 71, 50, 2 },
[QCOM_RPM_PM8921_LDO14] = { 159, 73, 51, 2 },
[QCOM_RPM_PM8921_LDO15] = { 161, 75, 52, 2 },
[QCOM_RPM_PM8921_LDO16] = { 163, 77, 53, 2 },
[QCOM_RPM_PM8921_LDO17] = { 165, 79, 54, 2 },
[QCOM_RPM_PM8921_LDO18] = { 167, 81, 55, 2 },
[QCOM_RPM_PM8921_LDO19] = { 169, 83, 56, 2 },
[QCOM_RPM_PM8921_LDO20] = { 171, 85, 57, 2 },
[QCOM_RPM_PM8921_LDO21] = { 173, 87, 58, 2 },
[QCOM_RPM_PM8921_LDO22] = { 175, 89, 59, 2 },
[QCOM_RPM_PM8921_LDO23] = { 177, 91, 60, 2 },
[QCOM_RPM_PM8921_LDO24] = { 179, 93, 61, 2 },
[QCOM_RPM_PM8921_LDO25] = { 181, 95, 62, 2 },
[QCOM_RPM_PM8921_LDO26] = { 183, 97, 63, 2 },
[QCOM_RPM_PM8921_LDO27] = { 185, 99, 64, 2 },
[QCOM_RPM_PM8921_LDO28] = { 187, 101, 65, 2 },
[QCOM_RPM_PM8921_LDO29] = { 189, 103, 66, 2 },
[QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
[QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
[QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
[QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
[QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
[QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
[QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
[QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
[QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
[QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
[QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
[QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
[QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
[QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
};
static const struct qcom_rpm_data msm8960_template = {
.version = 3,
.resource_table = msm8960_rpm_resource_table,
.n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
.req_ctx_off = 3,
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
mfd: qcom_rpm: Parametrize also ack selector size The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-22 14:27:17 +08:00
.req_sel_size = 4,
.ack_sel_size = 7,
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
};
mfd: qcom_rpm: Add support for IPQ8064 The IPQ8064 also includes an RPM following the same message structure as other chips. In addition, it supports a few new resource types to support the NSS fabric clocks and the SMB208/SMB209 regulators found on the reference boards. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-27 02:29:26 +08:00
static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
[QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
[QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
[QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
[QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
[QCOM_RPM_NSS_FABRIC_0_CLK] = { 29, 13, 10, 1 },
[QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
[QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
[QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
[QCOM_RPM_NSS_FABRIC_1_CLK] = { 33, 17, 14, 1 },
[QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
[QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 2 },
[QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 3 },
[QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
[QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
[QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 2 },
[QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 3 },
[QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
[QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
[QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 2 },
[QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 3 },
[QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
[QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 2 },
[QCOM_RPM_CXO_BUFFERS] = { 209, 33, 31, 1 },
[QCOM_RPM_USB_OTG_SWITCH] = { 210, 34, 32, 1 },
[QCOM_RPM_HDMI_SWITCH] = { 211, 35, 33, 1 },
[QCOM_RPM_DDR_DMM] = { 212, 36, 34, 2 },
[QCOM_RPM_VDDMIN_GPIO] = { 215, 40, 39, 1 },
[QCOM_RPM_SMB208_S1a] = { 216, 41, 90, 2 },
[QCOM_RPM_SMB208_S1b] = { 218, 43, 91, 2 },
[QCOM_RPM_SMB208_S2a] = { 220, 45, 92, 2 },
[QCOM_RPM_SMB208_S2b] = { 222, 47, 93, 2 },
};
static const struct qcom_rpm_data ipq806x_template = {
.version = 3,
.resource_table = ipq806x_rpm_resource_table,
.n_resources = ARRAY_SIZE(ipq806x_rpm_resource_table),
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
.req_ctx_off = 3,
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
mfd: qcom_rpm: Parametrize also ack selector size The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-22 14:27:17 +08:00
.req_sel_size = 4,
.ack_sel_size = 7,
mfd: qcom_rpm: Add support for IPQ8064 The IPQ8064 also includes an RPM following the same message structure as other chips. In addition, it supports a few new resource types to support the NSS fabric clocks and the SMB208/SMB209 regulators found on the reference boards. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-27 02:29:26 +08:00
};
mfd: qcom-rpm: Add support for pm8018 RPM Regulator In order to support the Qualcomm MDM9615 SoC, add support for the RPM regulator entries in the qcom-rpm driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-11 21:16:45 +08:00
static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
[QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
[QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
[QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
[QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
[QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
[QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
[QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
[QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
[QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
[QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
[QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
[QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
[QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
[QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
[QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
[QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
[QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
[QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
[QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
[QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
[QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
[QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
[QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
[QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
[QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
[QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
[QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
[QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
[QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
[QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
[QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
[QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
[QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
[QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
[QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
};
static const struct qcom_rpm_data mdm9615_template = {
.version = 3,
.resource_table = mdm9615_rpm_resource_table,
.n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
.req_ctx_off = 3,
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
.req_sel_size = 4,
.ack_sel_size = 7,
};
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
static const struct of_device_id qcom_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
mfd: qcom_rpm: Add support for IPQ8064 The IPQ8064 also includes an RPM following the same message structure as other chips. In addition, it supports a few new resource types to support the NSS fabric clocks and the SMB208/SMB209 regulators found on the reference boards. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-27 02:29:26 +08:00
{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
mfd: qcom-rpm: Add support for pm8018 RPM Regulator In order to support the Qualcomm MDM9615 SoC, add support for the RPM regulator entries in the qcom-rpm driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-11 21:16:45 +08:00
{ .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
{ }
};
MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
int qcom_rpm_write(struct qcom_rpm *rpm,
int state,
int resource,
u32 *buf, size_t count)
{
const struct qcom_rpm_resource *res;
const struct qcom_rpm_data *data = rpm->data;
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
u32 sel_mask[RPM_MAX_SEL_SIZE] = { 0 };
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
int left;
int ret = 0;
int i;
if (WARN_ON(resource < 0 || resource >= data->n_resources))
return -EINVAL;
res = &data->resource_table[resource];
if (WARN_ON(res->size != count))
return -EINVAL;
mutex_lock(&rpm->lock);
for (i = 0; i < res->size; i++)
writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
mfd: qcom_rpm: Parametrize also ack selector size The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-22 14:27:17 +08:00
for (i = 0; i < rpm->data->req_sel_size; i++) {
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
writel_relaxed(sel_mask[i],
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
RPM_CTRL_REG(rpm, rpm->data->req_sel_off + i));
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
}
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
writel_relaxed(BIT(state), RPM_CTRL_REG(rpm, rpm->data->req_ctx_off));
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
reinit_completion(&rpm->ack);
regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
if (!left)
ret = -ETIMEDOUT;
else if (rpm->ack_status & RPM_REJECTED)
ret = -EIO;
mutex_unlock(&rpm->lock);
return ret;
}
EXPORT_SYMBOL(qcom_rpm_write);
static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
{
struct qcom_rpm *rpm = dev;
u32 ack;
int i;
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
ack = readl_relaxed(RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
mfd: qcom_rpm: Parametrize also ack selector size The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-22 14:27:17 +08:00
for (i = 0; i < rpm->data->ack_sel_size; i++)
mfd: qcom_rpm: Fix offset error for msm8660 The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-15 07:02:26 +08:00
writel_relaxed(0,
RPM_CTRL_REG(rpm, rpm->data->ack_sel_off + i));
writel(0, RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
if (ack & RPM_NOTIFICATION) {
dev_warn(rpm->dev, "ignoring notification!\n");
} else {
rpm->ack_status = ack;
complete(&rpm->ack);
}
return IRQ_HANDLED;
}
static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
{
struct qcom_rpm *rpm = dev;
regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
dev_err(rpm->dev, "RPM triggered fatal error\n");
return IRQ_HANDLED;
}
static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
{
return IRQ_HANDLED;
}
static int qcom_rpm_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct device_node *syscon_np;
struct resource *res;
struct qcom_rpm *rpm;
u32 fw_version[3];
int irq_wakeup;
int irq_ack;
int irq_err;
int ret;
rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
if (!rpm)
return -ENOMEM;
rpm->dev = &pdev->dev;
mutex_init(&rpm->lock);
init_completion(&rpm->ack);
mfd: qcom_rpm: Handle message RAM clock The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock to the message RAM used by the RPM. This needs to be enabled for messages to pass through. This is a crude solution that simply prepare/enable at probe() and disable/unprepare at remove(). More elaborate PM is probably possible to add later. The construction uses IS_ERR() to gracefully handle the platforms that do not provide a message RAM clock. It will bail out of probe only if the clock is hitting a probe deferral situation. Of course this requires the proper device tree set-up: rpm: rpm@104000 { compatible = "qcom,rpm-msm8660"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; ... }; I have provided this in the MSM8660 device tree, and will provide patches for the other targets. Cc: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-19 02:40:45 +08:00
/* Enable message RAM clock */
rpm->ramclk = devm_clk_get(&pdev->dev, "ram");
if (IS_ERR(rpm->ramclk)) {
ret = PTR_ERR(rpm->ramclk);
if (ret == -EPROBE_DEFER)
return ret;
/*
* Fall through in all other cases, as the clock is
* optional. (Does not exist on all platforms.)
*/
rpm->ramclk = NULL;
}
clk_prepare_enable(rpm->ramclk); /* Accepts NULL */
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
irq_ack = platform_get_irq_byname(pdev, "ack");
mfd: Remove dev_err() usage after platform_get_irq() We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-31 02:15:27 +08:00
if (irq_ack < 0)
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
return irq_ack;
irq_err = platform_get_irq_byname(pdev, "err");
mfd: Remove dev_err() usage after platform_get_irq() We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-31 02:15:27 +08:00
if (irq_err < 0)
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
return irq_err;
irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
mfd: Remove dev_err() usage after platform_get_irq() We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-31 02:15:27 +08:00
if (irq_wakeup < 0)
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
return irq_wakeup;
match = of_match_device(qcom_rpm_of_match, &pdev->dev);
mfd: qcom_rpm: Fix a possible NULL dereference of_match_device could return NULL, and so cause a NULL pointer dereference later. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-12 15:49:59 +08:00
if (!match)
return -ENODEV;
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
rpm->data = match->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(rpm->status_regs))
return PTR_ERR(rpm->status_regs);
rpm->ctrl_regs = rpm->status_regs + 0x400;
rpm->req_regs = rpm->status_regs + 0x600;
syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
if (!syscon_np) {
dev_err(&pdev->dev, "no qcom,ipc node\n");
return -ENODEV;
}
rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
mfd: qcom_rpm: Add missing of_node_put after calling of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-15 17:38:46 +08:00
of_node_put(syscon_np);
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
if (IS_ERR(rpm->ipc_regmap))
return PTR_ERR(rpm->ipc_regmap);
ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
&rpm->ipc_offset);
if (ret < 0) {
dev_err(&pdev->dev, "no offset in qcom,ipc\n");
return -EINVAL;
}
ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
&rpm->ipc_bit);
if (ret < 0) {
dev_err(&pdev->dev, "no bit in qcom,ipc\n");
return -EINVAL;
}
dev_set_drvdata(&pdev->dev, rpm);
fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
if (fw_version[0] != rpm->data->version) {
dev_err(&pdev->dev,
"RPM version %u.%u.%u incompatible with driver version %u",
fw_version[0],
fw_version[1],
fw_version[2],
rpm->data->version);
return -EFAULT;
}
mfd: qcom_rpm: write fw_version to CTRL_REG This is required as part of the initialization sequence on certain SoCs. If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device). Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-11-20 03:53:17 +08:00
writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
fw_version[1],
fw_version[2]);
ret = devm_request_irq(&pdev->dev,
irq_ack,
qcom_rpm_ack_interrupt,
mfd: qcom_rpm: Drop use of IRQF_NO_SUSPEND flag The driver handles wakeup irq correctly using irq_set_irq_wake. There's no need to use IRQF_NO_SUSPEND while registering the interrupt. This patch removes the use of IRQF_NO_SUSPEND flag. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-09-25 20:39:13 +08:00
IRQF_TRIGGER_RISING,
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
"qcom_rpm_ack",
rpm);
if (ret) {
dev_err(&pdev->dev, "failed to request ack interrupt\n");
return ret;
}
ret = irq_set_irq_wake(irq_ack, 1);
if (ret)
dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
ret = devm_request_irq(&pdev->dev,
irq_err,
qcom_rpm_err_interrupt,
IRQF_TRIGGER_RISING,
"qcom_rpm_err",
rpm);
if (ret) {
dev_err(&pdev->dev, "failed to request err interrupt\n");
return ret;
}
ret = devm_request_irq(&pdev->dev,
irq_wakeup,
qcom_rpm_wakeup_interrupt,
IRQF_TRIGGER_RISING,
"qcom_rpm_wakeup",
rpm);
if (ret) {
dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
return ret;
}
ret = irq_set_irq_wake(irq_wakeup, 1);
if (ret)
dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
}
static int qcom_rpm_remove(struct platform_device *pdev)
{
mfd: qcom_rpm: Handle message RAM clock The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock to the message RAM used by the RPM. This needs to be enabled for messages to pass through. This is a crude solution that simply prepare/enable at probe() and disable/unprepare at remove(). More elaborate PM is probably possible to add later. The construction uses IS_ERR() to gracefully handle the platforms that do not provide a message RAM clock. It will bail out of probe only if the clock is hitting a probe deferral situation. Of course this requires the proper device tree set-up: rpm: rpm@104000 { compatible = "qcom,rpm-msm8660"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; ... }; I have provided this in the MSM8660 device tree, and will provide patches for the other targets. Cc: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-19 02:40:45 +08:00
struct qcom_rpm *rpm = dev_get_drvdata(&pdev->dev);
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
of_platform_depopulate(&pdev->dev);
mfd: qcom_rpm: Handle message RAM clock The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock to the message RAM used by the RPM. This needs to be enabled for messages to pass through. This is a crude solution that simply prepare/enable at probe() and disable/unprepare at remove(). More elaborate PM is probably possible to add later. The construction uses IS_ERR() to gracefully handle the platforms that do not provide a message RAM clock. It will bail out of probe only if the clock is hitting a probe deferral situation. Of course this requires the proper device tree set-up: rpm: rpm@104000 { compatible = "qcom,rpm-msm8660"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; ... }; I have provided this in the MSM8660 device tree, and will provide patches for the other targets. Cc: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-19 02:40:45 +08:00
clk_disable_unprepare(rpm->ramclk);
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-27 05:51:00 +08:00
return 0;
}
static struct platform_driver qcom_rpm_driver = {
.probe = qcom_rpm_probe,
.remove = qcom_rpm_remove,
.driver = {
.name = "qcom_rpm",
.of_match_table = qcom_rpm_of_match,
},
};
static int __init qcom_rpm_init(void)
{
return platform_driver_register(&qcom_rpm_driver);
}
arch_initcall(qcom_rpm_init);
static void __exit qcom_rpm_exit(void)
{
platform_driver_unregister(&qcom_rpm_driver);
}
module_exit(qcom_rpm_exit)
MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");