fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
|
|
*
|
|
|
|
* Freescale DIU Frame Buffer device driver
|
|
|
|
*
|
|
|
|
* Authors: Hongjun Chen <hong-jun.chen@freescale.com>
|
|
|
|
* Paul Widmer <paul.widmer@freescale.com>
|
|
|
|
* Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
|
|
|
|
* York Sun <yorksun@freescale.com>
|
|
|
|
*
|
|
|
|
* Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/fb.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <linux/vmalloc.h>
|
|
|
|
|
|
|
|
#include <linux/of_platform.h>
|
|
|
|
|
|
|
|
#include <sysdev/fsl_soc.h>
|
2010-07-23 12:00:36 +08:00
|
|
|
#include <linux/fsl-diu-fb.h>
|
2010-07-23 12:00:39 +08:00
|
|
|
#include "edid.h"
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* These parameters give default parameters
|
|
|
|
* for video output 1024x768,
|
|
|
|
* FIXME - change timing to proper amounts
|
|
|
|
* hsync 31.5kHz, vsync 60Hz
|
|
|
|
*/
|
|
|
|
static struct fb_videomode __devinitdata fsl_diu_default_mode = {
|
|
|
|
.refresh = 60,
|
|
|
|
.xres = 1024,
|
|
|
|
.yres = 768,
|
|
|
|
.pixclock = 15385,
|
|
|
|
.left_margin = 160,
|
|
|
|
.right_margin = 24,
|
|
|
|
.upper_margin = 29,
|
|
|
|
.lower_margin = 3,
|
|
|
|
.hsync_len = 136,
|
|
|
|
.vsync_len = 6,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
|
|
|
|
{
|
|
|
|
.name = "1024x768-60",
|
|
|
|
.refresh = 60,
|
|
|
|
.xres = 1024,
|
|
|
|
.yres = 768,
|
|
|
|
.pixclock = 15385,
|
|
|
|
.left_margin = 160,
|
|
|
|
.right_margin = 24,
|
|
|
|
.upper_margin = 29,
|
|
|
|
.lower_margin = 3,
|
|
|
|
.hsync_len = 136,
|
|
|
|
.vsync_len = 6,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1024x768-70",
|
|
|
|
.refresh = 70,
|
|
|
|
.xres = 1024,
|
|
|
|
.yres = 768,
|
|
|
|
.pixclock = 16886,
|
|
|
|
.left_margin = 3,
|
|
|
|
.right_margin = 3,
|
|
|
|
.upper_margin = 2,
|
|
|
|
.lower_margin = 2,
|
|
|
|
.hsync_len = 40,
|
|
|
|
.vsync_len = 18,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1024x768-75",
|
|
|
|
.refresh = 75,
|
|
|
|
.xres = 1024,
|
|
|
|
.yres = 768,
|
|
|
|
.pixclock = 15009,
|
|
|
|
.left_margin = 3,
|
|
|
|
.right_margin = 3,
|
|
|
|
.upper_margin = 2,
|
|
|
|
.lower_margin = 2,
|
|
|
|
.hsync_len = 80,
|
|
|
|
.vsync_len = 32,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1280x1024-60",
|
|
|
|
.refresh = 60,
|
|
|
|
.xres = 1280,
|
|
|
|
.yres = 1024,
|
|
|
|
.pixclock = 9375,
|
|
|
|
.left_margin = 38,
|
|
|
|
.right_margin = 128,
|
|
|
|
.upper_margin = 2,
|
|
|
|
.lower_margin = 7,
|
|
|
|
.hsync_len = 216,
|
|
|
|
.vsync_len = 37,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1280x1024-70",
|
|
|
|
.refresh = 70,
|
|
|
|
.xres = 1280,
|
|
|
|
.yres = 1024,
|
|
|
|
.pixclock = 9380,
|
|
|
|
.left_margin = 6,
|
|
|
|
.right_margin = 6,
|
|
|
|
.upper_margin = 4,
|
|
|
|
.lower_margin = 4,
|
|
|
|
.hsync_len = 60,
|
|
|
|
.vsync_len = 94,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1280x1024-75",
|
|
|
|
.refresh = 75,
|
|
|
|
.xres = 1280,
|
|
|
|
.yres = 1024,
|
|
|
|
.pixclock = 9380,
|
|
|
|
.left_margin = 6,
|
|
|
|
.right_margin = 6,
|
|
|
|
.upper_margin = 4,
|
|
|
|
.lower_margin = 4,
|
|
|
|
.hsync_len = 60,
|
|
|
|
.vsync_len = 15,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "320x240", /* for AOI only */
|
|
|
|
.refresh = 60,
|
|
|
|
.xres = 320,
|
|
|
|
.yres = 240,
|
|
|
|
.pixclock = 15385,
|
|
|
|
.left_margin = 0,
|
|
|
|
.right_margin = 0,
|
|
|
|
.upper_margin = 0,
|
|
|
|
.lower_margin = 0,
|
|
|
|
.hsync_len = 0,
|
|
|
|
.vsync_len = 0,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1280x480-60",
|
|
|
|
.refresh = 60,
|
|
|
|
.xres = 1280,
|
|
|
|
.yres = 480,
|
|
|
|
.pixclock = 18939,
|
|
|
|
.left_margin = 353,
|
|
|
|
.right_margin = 47,
|
|
|
|
.upper_margin = 39,
|
|
|
|
.lower_margin = 4,
|
|
|
|
.hsync_len = 8,
|
|
|
|
.vsync_len = 2,
|
|
|
|
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static char *fb_mode = "1024x768-32@60";
|
|
|
|
static unsigned long default_bpp = 32;
|
|
|
|
static int monitor_port;
|
|
|
|
|
|
|
|
#if defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
static u8 *coherence_data;
|
|
|
|
static size_t coherence_data_size;
|
|
|
|
static unsigned int d_cache_line_size;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static DEFINE_SPINLOCK(diu_lock);
|
|
|
|
|
|
|
|
struct fsl_diu_data {
|
|
|
|
struct fb_info *fsl_diu_info[FSL_AOI_NUM - 1];
|
|
|
|
/*FSL_AOI_NUM has one dummy AOI */
|
|
|
|
struct device_attribute dev_attr;
|
|
|
|
struct diu_ad *dummy_ad;
|
|
|
|
void *dummy_aoi_virt;
|
|
|
|
unsigned int irq;
|
|
|
|
int fb_enabled;
|
|
|
|
int monitor_port;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mfb_info {
|
|
|
|
int index;
|
|
|
|
int type;
|
|
|
|
char *id;
|
|
|
|
int registered;
|
|
|
|
int blank;
|
|
|
|
unsigned long pseudo_palette[16];
|
|
|
|
struct diu_ad *ad;
|
|
|
|
int cursor_reset;
|
|
|
|
unsigned char g_alpha;
|
|
|
|
unsigned int count;
|
|
|
|
int x_aoi_d; /* aoi display x offset to physical screen */
|
|
|
|
int y_aoi_d; /* aoi display y offset to physical screen */
|
|
|
|
struct fsl_diu_data *parent;
|
2010-07-23 12:00:39 +08:00
|
|
|
u8 *edid_data;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static struct mfb_info mfb_template[] = {
|
|
|
|
{ /* AOI 0 for plane 0 */
|
|
|
|
.index = 0,
|
|
|
|
.type = MFB_TYPE_OUTPUT,
|
|
|
|
.id = "Panel0",
|
|
|
|
.registered = 0,
|
|
|
|
.count = 0,
|
|
|
|
.x_aoi_d = 0,
|
|
|
|
.y_aoi_d = 0,
|
|
|
|
},
|
|
|
|
{ /* AOI 0 for plane 1 */
|
|
|
|
.index = 1,
|
|
|
|
.type = MFB_TYPE_OUTPUT,
|
|
|
|
.id = "Panel1 AOI0",
|
|
|
|
.registered = 0,
|
|
|
|
.g_alpha = 0xff,
|
|
|
|
.count = 0,
|
|
|
|
.x_aoi_d = 0,
|
|
|
|
.y_aoi_d = 0,
|
|
|
|
},
|
|
|
|
{ /* AOI 1 for plane 1 */
|
|
|
|
.index = 2,
|
|
|
|
.type = MFB_TYPE_OUTPUT,
|
|
|
|
.id = "Panel1 AOI1",
|
|
|
|
.registered = 0,
|
|
|
|
.g_alpha = 0xff,
|
|
|
|
.count = 0,
|
|
|
|
.x_aoi_d = 0,
|
|
|
|
.y_aoi_d = 480,
|
|
|
|
},
|
|
|
|
{ /* AOI 0 for plane 2 */
|
|
|
|
.index = 3,
|
|
|
|
.type = MFB_TYPE_OUTPUT,
|
|
|
|
.id = "Panel2 AOI0",
|
|
|
|
.registered = 0,
|
|
|
|
.g_alpha = 0xff,
|
|
|
|
.count = 0,
|
|
|
|
.x_aoi_d = 640,
|
|
|
|
.y_aoi_d = 0,
|
|
|
|
},
|
|
|
|
{ /* AOI 1 for plane 2 */
|
|
|
|
.index = 4,
|
|
|
|
.type = MFB_TYPE_OUTPUT,
|
|
|
|
.id = "Panel2 AOI1",
|
|
|
|
.registered = 0,
|
|
|
|
.g_alpha = 0xff,
|
|
|
|
.count = 0,
|
|
|
|
.x_aoi_d = 640,
|
|
|
|
.y_aoi_d = 480,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct diu_hw dr = {
|
|
|
|
.mode = MFB_MODE1,
|
|
|
|
.reg_lock = __SPIN_LOCK_UNLOCKED(diu_hw.reg_lock),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct diu_pool pool;
|
|
|
|
|
2008-07-24 12:31:39 +08:00
|
|
|
/**
|
|
|
|
* fsl_diu_alloc - allocate memory for the DIU
|
|
|
|
* @size: number of bytes to allocate
|
|
|
|
* @param: returned physical address of memory
|
|
|
|
*
|
|
|
|
* This function allocates a physically-contiguous block of memory.
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
*/
|
2008-07-24 12:31:39 +08:00
|
|
|
static void *fsl_diu_alloc(size_t size, phys_addr_t *phys)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
void *virt;
|
|
|
|
|
2008-07-24 12:31:39 +08:00
|
|
|
pr_debug("size=%zu\n", size);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
2008-07-24 12:31:39 +08:00
|
|
|
virt = alloc_pages_exact(size, GFP_DMA | __GFP_ZERO);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (virt) {
|
|
|
|
*phys = virt_to_phys(virt);
|
2008-07-24 12:31:39 +08:00
|
|
|
pr_debug("virt=%p phys=%llx\n", virt,
|
|
|
|
(unsigned long long)*phys);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return virt;
|
|
|
|
}
|
|
|
|
|
2008-07-24 12:31:39 +08:00
|
|
|
/**
|
|
|
|
* fsl_diu_free - release DIU memory
|
|
|
|
* @virt: pointer returned by fsl_diu_alloc()
|
|
|
|
* @size: number of bytes allocated by fsl_diu_alloc()
|
|
|
|
*
|
|
|
|
* This function releases memory allocated by fsl_diu_alloc().
|
|
|
|
*/
|
|
|
|
static void fsl_diu_free(void *virt, size_t size)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
2008-07-24 12:31:39 +08:00
|
|
|
pr_debug("virt=%p size=%zu\n", virt, size);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
2008-07-24 12:31:39 +08:00
|
|
|
if (virt && size)
|
|
|
|
free_pages_exact(virt, size);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
}
|
|
|
|
|
2010-07-23 12:00:35 +08:00
|
|
|
/*
|
|
|
|
* Workaround for failed writing desc register of planes.
|
|
|
|
* Needed with MPC5121 DIU rev 2.0 silicon.
|
|
|
|
*/
|
|
|
|
void wr_reg_wa(u32 *reg, u32 val)
|
|
|
|
{
|
|
|
|
do {
|
|
|
|
out_be32(reg, val);
|
|
|
|
} while (in_be32(reg) != val);
|
|
|
|
}
|
|
|
|
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
static int fsl_diu_enable_panel(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
|
|
|
|
struct diu *hw = dr.diu_reg;
|
|
|
|
struct diu_ad *ad = mfbi->ad;
|
|
|
|
struct fsl_diu_data *machine_data = mfbi->parent;
|
|
|
|
int res = 0;
|
|
|
|
|
|
|
|
pr_debug("enable_panel index %d\n", mfbi->index);
|
|
|
|
if (mfbi->type != MFB_TYPE_OFF) {
|
|
|
|
switch (mfbi->index) {
|
|
|
|
case 0: /* plane 0 */
|
|
|
|
if (hw->desc[0] != ad->paddr)
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[0], ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
break;
|
|
|
|
case 1: /* plane 1 AOI 0 */
|
|
|
|
cmfbi = machine_data->fsl_diu_info[2]->par;
|
|
|
|
if (hw->desc[1] != ad->paddr) { /* AOI0 closed */
|
|
|
|
if (cmfbi->count > 0) /* AOI1 open */
|
|
|
|
ad->next_ad =
|
|
|
|
cpu_to_le32(cmfbi->ad->paddr);
|
|
|
|
else
|
|
|
|
ad->next_ad = 0;
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[1], ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 3: /* plane 2 AOI 0 */
|
|
|
|
cmfbi = machine_data->fsl_diu_info[4]->par;
|
|
|
|
if (hw->desc[2] != ad->paddr) { /* AOI0 closed */
|
|
|
|
if (cmfbi->count > 0) /* AOI1 open */
|
|
|
|
ad->next_ad =
|
|
|
|
cpu_to_le32(cmfbi->ad->paddr);
|
|
|
|
else
|
|
|
|
ad->next_ad = 0;
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[2], ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 2: /* plane 1 AOI 1 */
|
|
|
|
pmfbi = machine_data->fsl_diu_info[1]->par;
|
|
|
|
ad->next_ad = 0;
|
|
|
|
if (hw->desc[1] == machine_data->dummy_ad->paddr)
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[1], ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
else /* AOI0 open */
|
|
|
|
pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
|
|
|
|
break;
|
|
|
|
case 4: /* plane 2 AOI 1 */
|
|
|
|
pmfbi = machine_data->fsl_diu_info[3]->par;
|
|
|
|
ad->next_ad = 0;
|
|
|
|
if (hw->desc[2] == machine_data->dummy_ad->paddr)
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[2], ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
else /* AOI0 was open */
|
|
|
|
pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
res = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
res = -EINVAL;
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fsl_diu_disable_panel(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
|
|
|
|
struct diu *hw = dr.diu_reg;
|
|
|
|
struct diu_ad *ad = mfbi->ad;
|
|
|
|
struct fsl_diu_data *machine_data = mfbi->parent;
|
|
|
|
int res = 0;
|
|
|
|
|
|
|
|
switch (mfbi->index) {
|
|
|
|
case 0: /* plane 0 */
|
|
|
|
if (hw->desc[0] != machine_data->dummy_ad->paddr)
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[0], machine_data->dummy_ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
break;
|
|
|
|
case 1: /* plane 1 AOI 0 */
|
|
|
|
cmfbi = machine_data->fsl_diu_info[2]->par;
|
|
|
|
if (cmfbi->count > 0) /* AOI1 is open */
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/* move AOI1 to the first */
|
|
|
|
else /* AOI1 was closed */
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/* close AOI 0 */
|
|
|
|
break;
|
|
|
|
case 3: /* plane 2 AOI 0 */
|
|
|
|
cmfbi = machine_data->fsl_diu_info[4]->par;
|
|
|
|
if (cmfbi->count > 0) /* AOI1 is open */
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/* move AOI1 to the first */
|
|
|
|
else /* AOI1 was closed */
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/* close AOI 0 */
|
|
|
|
break;
|
|
|
|
case 2: /* plane 1 AOI 1 */
|
|
|
|
pmfbi = machine_data->fsl_diu_info[1]->par;
|
|
|
|
if (hw->desc[1] != ad->paddr) {
|
|
|
|
/* AOI1 is not the first in the chain */
|
|
|
|
if (pmfbi->count > 0)
|
|
|
|
/* AOI0 is open, must be the first */
|
|
|
|
pmfbi->ad->next_ad = 0;
|
|
|
|
} else /* AOI1 is the first in the chain */
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/* close AOI 1 */
|
|
|
|
break;
|
|
|
|
case 4: /* plane 2 AOI 1 */
|
|
|
|
pmfbi = machine_data->fsl_diu_info[3]->par;
|
|
|
|
if (hw->desc[2] != ad->paddr) {
|
|
|
|
/* AOI1 is not the first in the chain */
|
|
|
|
if (pmfbi->count > 0)
|
|
|
|
/* AOI0 is open, must be the first */
|
|
|
|
pmfbi->ad->next_ad = 0;
|
|
|
|
} else /* AOI1 is the first in the chain */
|
2010-07-23 12:00:35 +08:00
|
|
|
wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/* close AOI 1 */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
res = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void enable_lcdc(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct diu *hw = dr.diu_reg;
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
struct fsl_diu_data *machine_data = mfbi->parent;
|
|
|
|
|
|
|
|
if (!machine_data->fb_enabled) {
|
|
|
|
out_be32(&hw->diu_mode, dr.mode);
|
|
|
|
machine_data->fb_enabled++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void disable_lcdc(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct diu *hw = dr.diu_reg;
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
struct fsl_diu_data *machine_data = mfbi->parent;
|
|
|
|
|
|
|
|
if (machine_data->fb_enabled) {
|
|
|
|
out_be32(&hw->diu_mode, 0);
|
|
|
|
machine_data->fb_enabled = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
|
|
|
|
struct fsl_diu_data *machine_data = mfbi->parent;
|
|
|
|
int available_height, upper_aoi_bottom, index = mfbi->index;
|
|
|
|
int lower_aoi_is_open, upper_aoi_is_open;
|
|
|
|
__u32 base_plane_width, base_plane_height, upper_aoi_height;
|
|
|
|
|
|
|
|
base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
|
|
|
|
base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
|
|
|
|
|
2008-08-15 15:40:29 +08:00
|
|
|
if (mfbi->x_aoi_d < 0)
|
|
|
|
mfbi->x_aoi_d = 0;
|
|
|
|
if (mfbi->y_aoi_d < 0)
|
|
|
|
mfbi->y_aoi_d = 0;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
switch (index) {
|
|
|
|
case 0:
|
|
|
|
if (mfbi->x_aoi_d != 0)
|
|
|
|
mfbi->x_aoi_d = 0;
|
|
|
|
if (mfbi->y_aoi_d != 0)
|
|
|
|
mfbi->y_aoi_d = 0;
|
|
|
|
break;
|
|
|
|
case 1: /* AOI 0 */
|
|
|
|
case 3:
|
|
|
|
lower_aoi_mfbi = machine_data->fsl_diu_info[index+1]->par;
|
|
|
|
lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
|
|
|
|
if (var->xres > base_plane_width)
|
|
|
|
var->xres = base_plane_width;
|
|
|
|
if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
|
|
|
|
mfbi->x_aoi_d = base_plane_width - var->xres;
|
|
|
|
|
|
|
|
if (lower_aoi_is_open)
|
|
|
|
available_height = lower_aoi_mfbi->y_aoi_d;
|
|
|
|
else
|
|
|
|
available_height = base_plane_height;
|
|
|
|
if (var->yres > available_height)
|
|
|
|
var->yres = available_height;
|
|
|
|
if ((mfbi->y_aoi_d + var->yres) > available_height)
|
|
|
|
mfbi->y_aoi_d = available_height - var->yres;
|
|
|
|
break;
|
|
|
|
case 2: /* AOI 1 */
|
|
|
|
case 4:
|
|
|
|
upper_aoi_mfbi = machine_data->fsl_diu_info[index-1]->par;
|
|
|
|
upper_aoi_height =
|
|
|
|
machine_data->fsl_diu_info[index-1]->var.yres;
|
|
|
|
upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height;
|
|
|
|
upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0;
|
|
|
|
if (var->xres > base_plane_width)
|
|
|
|
var->xres = base_plane_width;
|
|
|
|
if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
|
|
|
|
mfbi->x_aoi_d = base_plane_width - var->xres;
|
|
|
|
if (mfbi->y_aoi_d < 0)
|
|
|
|
mfbi->y_aoi_d = 0;
|
|
|
|
if (upper_aoi_is_open) {
|
|
|
|
if (mfbi->y_aoi_d < upper_aoi_bottom)
|
|
|
|
mfbi->y_aoi_d = upper_aoi_bottom;
|
|
|
|
available_height = base_plane_height
|
|
|
|
- upper_aoi_bottom;
|
|
|
|
} else
|
|
|
|
available_height = base_plane_height;
|
|
|
|
if (var->yres > available_height)
|
|
|
|
var->yres = available_height;
|
|
|
|
if ((mfbi->y_aoi_d + var->yres) > base_plane_height)
|
|
|
|
mfbi->y_aoi_d = base_plane_height - var->yres;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Checks to see if the hardware supports the state requested by var passed
|
|
|
|
* in. This function does not alter the hardware state! If the var passed in
|
|
|
|
* is slightly off by what the hardware can support then we alter the var
|
|
|
|
* PASSED in to what we can do. If the hardware doesn't support mode change
|
|
|
|
* a -EINVAL will be returned by the upper layers.
|
|
|
|
*/
|
|
|
|
static int fsl_diu_check_var(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_info *info)
|
|
|
|
{
|
|
|
|
pr_debug("check_var xres: %d\n", var->xres);
|
|
|
|
pr_debug("check_var yres: %d\n", var->yres);
|
|
|
|
|
|
|
|
if (var->xres_virtual < var->xres)
|
|
|
|
var->xres_virtual = var->xres;
|
|
|
|
if (var->yres_virtual < var->yres)
|
|
|
|
var->yres_virtual = var->yres;
|
|
|
|
|
|
|
|
if (var->xoffset < 0)
|
|
|
|
var->xoffset = 0;
|
|
|
|
|
|
|
|
if (var->yoffset < 0)
|
|
|
|
var->yoffset = 0;
|
|
|
|
|
|
|
|
if (var->xoffset + info->var.xres > info->var.xres_virtual)
|
|
|
|
var->xoffset = info->var.xres_virtual - info->var.xres;
|
|
|
|
|
|
|
|
if (var->yoffset + info->var.yres > info->var.yres_virtual)
|
|
|
|
var->yoffset = info->var.yres_virtual - info->var.yres;
|
|
|
|
|
|
|
|
if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
|
|
|
|
(var->bits_per_pixel != 16))
|
|
|
|
var->bits_per_pixel = default_bpp;
|
|
|
|
|
|
|
|
switch (var->bits_per_pixel) {
|
|
|
|
case 16:
|
|
|
|
var->red.length = 5;
|
|
|
|
var->red.offset = 11;
|
|
|
|
var->red.msb_right = 0;
|
|
|
|
|
|
|
|
var->green.length = 6;
|
|
|
|
var->green.offset = 5;
|
|
|
|
var->green.msb_right = 0;
|
|
|
|
|
|
|
|
var->blue.length = 5;
|
|
|
|
var->blue.offset = 0;
|
|
|
|
var->blue.msb_right = 0;
|
|
|
|
|
|
|
|
var->transp.length = 0;
|
|
|
|
var->transp.offset = 0;
|
|
|
|
var->transp.msb_right = 0;
|
|
|
|
break;
|
|
|
|
case 24:
|
|
|
|
var->red.length = 8;
|
|
|
|
var->red.offset = 0;
|
|
|
|
var->red.msb_right = 0;
|
|
|
|
|
|
|
|
var->green.length = 8;
|
|
|
|
var->green.offset = 8;
|
|
|
|
var->green.msb_right = 0;
|
|
|
|
|
|
|
|
var->blue.length = 8;
|
|
|
|
var->blue.offset = 16;
|
|
|
|
var->blue.msb_right = 0;
|
|
|
|
|
|
|
|
var->transp.length = 0;
|
|
|
|
var->transp.offset = 0;
|
|
|
|
var->transp.msb_right = 0;
|
|
|
|
break;
|
|
|
|
case 32:
|
|
|
|
var->red.length = 8;
|
|
|
|
var->red.offset = 16;
|
|
|
|
var->red.msb_right = 0;
|
|
|
|
|
|
|
|
var->green.length = 8;
|
|
|
|
var->green.offset = 8;
|
|
|
|
var->green.msb_right = 0;
|
|
|
|
|
|
|
|
var->blue.length = 8;
|
|
|
|
var->blue.offset = 0;
|
|
|
|
var->blue.msb_right = 0;
|
|
|
|
|
|
|
|
var->transp.length = 8;
|
|
|
|
var->transp.offset = 24;
|
|
|
|
var->transp.msb_right = 0;
|
|
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
var->height = -1;
|
|
|
|
var->width = -1;
|
|
|
|
var->grayscale = 0;
|
|
|
|
|
|
|
|
/* Copy nonstd field to/from sync for fbset usage */
|
|
|
|
var->sync |= var->nonstd;
|
|
|
|
var->nonstd |= var->sync;
|
|
|
|
|
|
|
|
adjust_aoi_size_position(var, info);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_fix(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct fb_fix_screeninfo *fix = &info->fix;
|
|
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
|
|
|
|
strncpy(fix->id, mfbi->id, strlen(mfbi->id));
|
|
|
|
fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
|
|
|
|
fix->type = FB_TYPE_PACKED_PIXELS;
|
|
|
|
fix->accel = FB_ACCEL_NONE;
|
|
|
|
fix->visual = FB_VISUAL_TRUECOLOR;
|
|
|
|
fix->xpanstep = 1;
|
|
|
|
fix->ypanstep = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void update_lcdc(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
struct fsl_diu_data *machine_data = mfbi->parent;
|
|
|
|
struct diu *hw;
|
|
|
|
int i, j;
|
|
|
|
char __iomem *cursor_base, *gamma_table_base;
|
|
|
|
|
|
|
|
u32 temp;
|
|
|
|
|
|
|
|
hw = dr.diu_reg;
|
|
|
|
|
|
|
|
if (mfbi->type == MFB_TYPE_OFF) {
|
|
|
|
fsl_diu_disable_panel(info);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
diu_ops.set_monitor_port(machine_data->monitor_port);
|
|
|
|
gamma_table_base = pool.gamma.vaddr;
|
|
|
|
cursor_base = pool.cursor.vaddr;
|
|
|
|
/* Prep for DIU init - gamma table, cursor table */
|
|
|
|
|
|
|
|
for (i = 0; i <= 2; i++)
|
|
|
|
for (j = 0; j <= 255; j++)
|
|
|
|
*gamma_table_base++ = j;
|
|
|
|
|
|
|
|
diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr);
|
|
|
|
|
|
|
|
pr_debug("update-lcdc: HW - %p\n Disabling DIU\n", hw);
|
|
|
|
disable_lcdc(info);
|
|
|
|
|
|
|
|
/* Program DIU registers */
|
|
|
|
|
|
|
|
out_be32(&hw->gamma, pool.gamma.paddr);
|
|
|
|
out_be32(&hw->cursor, pool.cursor.paddr);
|
|
|
|
|
|
|
|
out_be32(&hw->bgnd, 0x007F7F7F); /* BGND */
|
|
|
|
out_be32(&hw->bgnd_wb, 0); /* BGND_WB */
|
|
|
|
out_be32(&hw->disp_size, (var->yres << 16 | var->xres));
|
|
|
|
/* DISP SIZE */
|
|
|
|
pr_debug("DIU xres: %d\n", var->xres);
|
|
|
|
pr_debug("DIU yres: %d\n", var->yres);
|
|
|
|
|
|
|
|
out_be32(&hw->wb_size, 0); /* WB SIZE */
|
|
|
|
out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */
|
|
|
|
|
|
|
|
/* Horizontal and vertical configuration register */
|
|
|
|
temp = var->left_margin << 22 | /* BP_H */
|
|
|
|
var->hsync_len << 11 | /* PW_H */
|
|
|
|
var->right_margin; /* FP_H */
|
|
|
|
|
|
|
|
out_be32(&hw->hsyn_para, temp);
|
|
|
|
|
|
|
|
temp = var->upper_margin << 22 | /* BP_V */
|
|
|
|
var->vsync_len << 11 | /* PW_V */
|
|
|
|
var->lower_margin; /* FP_V */
|
|
|
|
|
|
|
|
out_be32(&hw->vsyn_para, temp);
|
|
|
|
|
|
|
|
pr_debug("DIU right_margin - %d\n", var->right_margin);
|
|
|
|
pr_debug("DIU left_margin - %d\n", var->left_margin);
|
|
|
|
pr_debug("DIU hsync_len - %d\n", var->hsync_len);
|
|
|
|
pr_debug("DIU upper_margin - %d\n", var->upper_margin);
|
|
|
|
pr_debug("DIU lower_margin - %d\n", var->lower_margin);
|
|
|
|
pr_debug("DIU vsync_len - %d\n", var->vsync_len);
|
|
|
|
pr_debug("DIU HSYNC - 0x%08x\n", hw->hsyn_para);
|
|
|
|
pr_debug("DIU VSYNC - 0x%08x\n", hw->vsyn_para);
|
|
|
|
|
|
|
|
diu_ops.set_pixel_clock(var->pixclock);
|
|
|
|
|
|
|
|
out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */
|
|
|
|
out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */
|
|
|
|
out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */
|
|
|
|
out_be32(&hw->plut, 0x01F5F666);
|
|
|
|
|
|
|
|
/* Enable the DIU */
|
|
|
|
enable_lcdc(info);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int map_video_memory(struct fb_info *info)
|
|
|
|
{
|
|
|
|
phys_addr_t phys;
|
2009-07-01 02:41:29 +08:00
|
|
|
u32 smem_len = info->fix.line_length * info->var.yres_virtual;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
|
|
|
pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
|
|
|
|
pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
|
|
|
|
pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
|
2009-07-01 02:41:29 +08:00
|
|
|
pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
2009-07-01 02:41:29 +08:00
|
|
|
info->screen_base = fsl_diu_alloc(smem_len, &phys);
|
2008-07-05 00:59:38 +08:00
|
|
|
if (info->screen_base == NULL) {
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
printk(KERN_ERR "Unable to allocate fb memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2009-07-01 02:41:29 +08:00
|
|
|
mutex_lock(&info->mm_lock);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
info->fix.smem_start = (unsigned long) phys;
|
2009-07-01 02:41:29 +08:00
|
|
|
info->fix.smem_len = smem_len;
|
|
|
|
mutex_unlock(&info->mm_lock);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
info->screen_size = info->fix.smem_len;
|
|
|
|
|
|
|
|
pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
|
2009-07-01 02:41:29 +08:00
|
|
|
info->fix.smem_start, info->fix.smem_len);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
pr_debug("screen base %p\n", info->screen_base);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void unmap_video_memory(struct fb_info *info)
|
|
|
|
{
|
|
|
|
fsl_diu_free(info->screen_base, info->fix.smem_len);
|
2009-07-01 02:41:29 +08:00
|
|
|
mutex_lock(&info->mm_lock);
|
2008-07-05 00:59:38 +08:00
|
|
|
info->screen_base = NULL;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
info->fix.smem_start = 0;
|
|
|
|
info->fix.smem_len = 0;
|
2009-07-01 02:41:29 +08:00
|
|
|
mutex_unlock(&info->mm_lock);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
}
|
|
|
|
|
2008-08-15 15:40:28 +08:00
|
|
|
/*
|
|
|
|
* Using the fb_var_screeninfo in fb_info we set the aoi of this
|
|
|
|
* particular framebuffer. It is a light version of fsl_diu_set_par.
|
|
|
|
*/
|
|
|
|
static int fsl_diu_set_aoi(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
struct diu_ad *ad = mfbi->ad;
|
|
|
|
|
|
|
|
/* AOI should not be greater than display size */
|
|
|
|
ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
|
|
|
|
ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
/*
|
|
|
|
* Using the fb_var_screeninfo in fb_info we set the resolution of this
|
|
|
|
* particular framebuffer. This function alters the fb_fix_screeninfo stored
|
|
|
|
* in fb_info. It does not alter var in fb_info since we are using that
|
|
|
|
* data. This means we depend on the data in var inside fb_info to be
|
|
|
|
* supported by the hardware. fsl_diu_check_var is always called before
|
|
|
|
* fsl_diu_set_par to ensure this.
|
|
|
|
*/
|
|
|
|
static int fsl_diu_set_par(struct fb_info *info)
|
|
|
|
{
|
|
|
|
unsigned long len;
|
|
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
struct fsl_diu_data *machine_data = mfbi->parent;
|
|
|
|
struct diu_ad *ad = mfbi->ad;
|
|
|
|
struct diu *hw;
|
|
|
|
|
|
|
|
hw = dr.diu_reg;
|
|
|
|
|
|
|
|
set_fix(info);
|
|
|
|
mfbi->cursor_reset = 1;
|
|
|
|
|
|
|
|
len = info->var.yres_virtual * info->fix.line_length;
|
|
|
|
/* Alloc & dealloc each time resolution/bpp change */
|
|
|
|
if (len != info->fix.smem_len) {
|
|
|
|
if (info->fix.smem_start)
|
|
|
|
unmap_video_memory(info);
|
|
|
|
pr_debug("SET PAR: smem_len = %d\n", info->fix.smem_len);
|
|
|
|
|
|
|
|
/* Memory allocation for framebuffer */
|
|
|
|
if (map_video_memory(info)) {
|
|
|
|
printk(KERN_ERR "Unable to allocate fb memory 1\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ad->pix_fmt =
|
|
|
|
diu_ops.get_pixel_format(var->bits_per_pixel,
|
|
|
|
machine_data->monitor_port);
|
|
|
|
ad->addr = cpu_to_le32(info->fix.smem_start);
|
2008-08-15 15:40:28 +08:00
|
|
|
ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
|
|
|
|
var->xres_virtual) | mfbi->g_alpha;
|
|
|
|
/* AOI should not be greater than display size */
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres);
|
2008-08-15 15:40:28 +08:00
|
|
|
ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
|
|
|
|
|
|
|
|
/* Disable chroma keying function */
|
|
|
|
ad->ckmax_r = 0;
|
|
|
|
ad->ckmax_g = 0;
|
|
|
|
ad->ckmax_b = 0;
|
|
|
|
|
|
|
|
ad->ckmin_r = 255;
|
|
|
|
ad->ckmin_g = 255;
|
|
|
|
ad->ckmin_b = 255;
|
|
|
|
|
|
|
|
if (mfbi->index == 0)
|
|
|
|
update_lcdc(info);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
|
|
|
|
{
|
|
|
|
return ((val<<width) + 0x7FFF - val)>>16;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set a single color register. The values supplied have a 16 bit magnitude
|
|
|
|
* which needs to be scaled in this function for the hardware. Things to take
|
|
|
|
* into consideration are how many color registers, if any, are supported with
|
|
|
|
* the current color visual. With truecolor mode no color palettes are
|
2011-03-31 09:57:33 +08:00
|
|
|
* supported. Here a pseudo palette is created which we store the value in
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
* pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
|
|
|
|
* color palette.
|
|
|
|
*/
|
|
|
|
static int fsl_diu_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
|
|
unsigned blue, unsigned transp, struct fb_info *info)
|
|
|
|
{
|
|
|
|
int ret = 1;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If greyscale is true, then we convert the RGB value
|
|
|
|
* to greyscale no matter what visual we are using.
|
|
|
|
*/
|
|
|
|
if (info->var.grayscale)
|
|
|
|
red = green = blue = (19595 * red + 38470 * green +
|
|
|
|
7471 * blue) >> 16;
|
|
|
|
switch (info->fix.visual) {
|
|
|
|
case FB_VISUAL_TRUECOLOR:
|
|
|
|
/*
|
|
|
|
* 16-bit True Colour. We encode the RGB value
|
|
|
|
* according to the RGB bitfield information.
|
|
|
|
*/
|
|
|
|
if (regno < 16) {
|
|
|
|
u32 *pal = info->pseudo_palette;
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
red = CNVT_TOHW(red, info->var.red.length);
|
|
|
|
green = CNVT_TOHW(green, info->var.green.length);
|
|
|
|
blue = CNVT_TOHW(blue, info->var.blue.length);
|
|
|
|
transp = CNVT_TOHW(transp, info->var.transp.length);
|
|
|
|
|
|
|
|
v = (red << info->var.red.offset) |
|
|
|
|
(green << info->var.green.offset) |
|
|
|
|
(blue << info->var.blue.offset) |
|
|
|
|
(transp << info->var.transp.offset);
|
|
|
|
|
|
|
|
pal[regno] = v;
|
|
|
|
ret = 0;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case FB_VISUAL_STATIC_PSEUDOCOLOR:
|
|
|
|
case FB_VISUAL_PSEUDOCOLOR:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Pan (or wrap, depending on the `vmode' field) the display using the
|
|
|
|
* 'xoffset' and 'yoffset' fields of the 'var' structure. If the values
|
|
|
|
* don't fit, return -EINVAL.
|
|
|
|
*/
|
|
|
|
static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_info *info)
|
|
|
|
{
|
|
|
|
if ((info->var.xoffset == var->xoffset) &&
|
|
|
|
(info->var.yoffset == var->yoffset))
|
|
|
|
return 0; /* No change, do nothing */
|
|
|
|
|
|
|
|
if (var->xoffset < 0 || var->yoffset < 0
|
|
|
|
|| var->xoffset + info->var.xres > info->var.xres_virtual
|
|
|
|
|| var->yoffset + info->var.yres > info->var.yres_virtual)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
info->var.xoffset = var->xoffset;
|
|
|
|
info->var.yoffset = var->yoffset;
|
|
|
|
|
|
|
|
if (var->vmode & FB_VMODE_YWRAP)
|
|
|
|
info->var.vmode |= FB_VMODE_YWRAP;
|
|
|
|
else
|
|
|
|
info->var.vmode &= ~FB_VMODE_YWRAP;
|
|
|
|
|
2008-08-15 15:40:28 +08:00
|
|
|
fsl_diu_set_aoi(info);
|
|
|
|
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Blank the screen if blank_mode != 0, else unblank. Return 0 if blanking
|
|
|
|
* succeeded, != 0 if un-/blanking failed.
|
|
|
|
* blank_mode == 2: suspend vsync
|
|
|
|
* blank_mode == 3: suspend hsync
|
|
|
|
* blank_mode == 4: powerdown
|
|
|
|
*/
|
|
|
|
static int fsl_diu_blank(int blank_mode, struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
|
|
|
|
mfbi->blank = blank_mode;
|
|
|
|
|
|
|
|
switch (blank_mode) {
|
|
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
|
|
/* FIXME: fixes to enable_panel and enable lcdc needed */
|
|
|
|
case FB_BLANK_NORMAL:
|
|
|
|
/* fsl_diu_disable_panel(info);*/
|
|
|
|
break;
|
|
|
|
case FB_BLANK_POWERDOWN:
|
|
|
|
/* disable_lcdc(info); */
|
|
|
|
break;
|
|
|
|
case FB_BLANK_UNBLANK:
|
|
|
|
/* fsl_diu_enable_panel(info);*/
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
|
|
|
|
unsigned long arg)
|
|
|
|
{
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
struct diu_ad *ad = mfbi->ad;
|
|
|
|
struct mfb_chroma_key ck;
|
|
|
|
unsigned char global_alpha;
|
|
|
|
struct aoi_display_offset aoi_d;
|
|
|
|
__u32 pix_fmt;
|
|
|
|
void __user *buf = (void __user *)arg;
|
|
|
|
|
|
|
|
if (!arg)
|
|
|
|
return -EINVAL;
|
|
|
|
switch (cmd) {
|
|
|
|
case MFB_SET_PIXFMT:
|
|
|
|
if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
|
|
|
|
return -EFAULT;
|
|
|
|
ad->pix_fmt = pix_fmt;
|
|
|
|
pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt);
|
|
|
|
break;
|
|
|
|
case MFB_GET_PIXFMT:
|
|
|
|
pix_fmt = ad->pix_fmt;
|
|
|
|
if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
|
|
|
|
return -EFAULT;
|
|
|
|
pr_debug("get pixel format 0x%08x\n", ad->pix_fmt);
|
|
|
|
break;
|
|
|
|
case MFB_SET_AOID:
|
|
|
|
if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
|
|
|
|
return -EFAULT;
|
|
|
|
mfbi->x_aoi_d = aoi_d.x_aoi_d;
|
|
|
|
mfbi->y_aoi_d = aoi_d.y_aoi_d;
|
|
|
|
pr_debug("set AOI display offset of index %d to (%d,%d)\n",
|
|
|
|
mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
|
|
|
|
fsl_diu_check_var(&info->var, info);
|
2008-08-15 15:40:28 +08:00
|
|
|
fsl_diu_set_aoi(info);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
break;
|
|
|
|
case MFB_GET_AOID:
|
|
|
|
aoi_d.x_aoi_d = mfbi->x_aoi_d;
|
|
|
|
aoi_d.y_aoi_d = mfbi->y_aoi_d;
|
|
|
|
if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
|
|
|
|
return -EFAULT;
|
|
|
|
pr_debug("get AOI display offset of index %d (%d,%d)\n",
|
|
|
|
mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
|
|
|
|
break;
|
|
|
|
case MFB_GET_ALPHA:
|
|
|
|
global_alpha = mfbi->g_alpha;
|
|
|
|
if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
|
|
|
|
return -EFAULT;
|
|
|
|
pr_debug("get global alpha of index %d\n", mfbi->index);
|
|
|
|
break;
|
|
|
|
case MFB_SET_ALPHA:
|
|
|
|
/* set panel information */
|
|
|
|
if (copy_from_user(&global_alpha, buf, sizeof(global_alpha)))
|
|
|
|
return -EFAULT;
|
|
|
|
ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
|
|
|
|
(global_alpha & 0xff);
|
|
|
|
mfbi->g_alpha = global_alpha;
|
|
|
|
pr_debug("set global alpha for index %d\n", mfbi->index);
|
|
|
|
break;
|
|
|
|
case MFB_SET_CHROMA_KEY:
|
|
|
|
/* set panel winformation */
|
|
|
|
if (copy_from_user(&ck, buf, sizeof(ck)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
if (ck.enable &&
|
|
|
|
(ck.red_max < ck.red_min ||
|
|
|
|
ck.green_max < ck.green_min ||
|
|
|
|
ck.blue_max < ck.blue_min))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!ck.enable) {
|
|
|
|
ad->ckmax_r = 0;
|
|
|
|
ad->ckmax_g = 0;
|
|
|
|
ad->ckmax_b = 0;
|
|
|
|
ad->ckmin_r = 255;
|
|
|
|
ad->ckmin_g = 255;
|
|
|
|
ad->ckmin_b = 255;
|
|
|
|
} else {
|
|
|
|
ad->ckmax_r = ck.red_max;
|
|
|
|
ad->ckmax_g = ck.green_max;
|
|
|
|
ad->ckmax_b = ck.blue_max;
|
|
|
|
ad->ckmin_r = ck.red_min;
|
|
|
|
ad->ckmin_g = ck.green_min;
|
|
|
|
ad->ckmin_b = ck.blue_min;
|
|
|
|
}
|
|
|
|
pr_debug("set chroma key\n");
|
|
|
|
break;
|
|
|
|
case FBIOGET_GWINFO:
|
|
|
|
if (mfbi->type == MFB_TYPE_OFF)
|
|
|
|
return -ENODEV;
|
|
|
|
/* get graphic window information */
|
|
|
|
if (copy_to_user(buf, ad, sizeof(*ad)))
|
|
|
|
return -EFAULT;
|
|
|
|
break;
|
|
|
|
case FBIOGET_HWCINFO:
|
|
|
|
pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO);
|
|
|
|
break;
|
|
|
|
case FBIOPUT_MODEINFO:
|
|
|
|
pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO);
|
|
|
|
break;
|
|
|
|
case FBIOGET_DISPINFO:
|
|
|
|
pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd);
|
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* turn on fb if count == 1
|
|
|
|
*/
|
|
|
|
static int fsl_diu_open(struct fb_info *info, int user)
|
|
|
|
{
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
int res = 0;
|
|
|
|
|
2010-07-23 12:00:37 +08:00
|
|
|
/* free boot splash memory on first /dev/fb0 open */
|
|
|
|
if (!mfbi->index && diu_ops.release_bootmem)
|
|
|
|
diu_ops.release_bootmem();
|
|
|
|
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
spin_lock(&diu_lock);
|
|
|
|
mfbi->count++;
|
|
|
|
if (mfbi->count == 1) {
|
|
|
|
pr_debug("open plane index %d\n", mfbi->index);
|
|
|
|
fsl_diu_check_var(&info->var, info);
|
|
|
|
res = fsl_diu_set_par(info);
|
|
|
|
if (res < 0)
|
|
|
|
mfbi->count--;
|
|
|
|
else {
|
|
|
|
res = fsl_diu_enable_panel(info);
|
|
|
|
if (res < 0)
|
|
|
|
mfbi->count--;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&diu_lock);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* turn off fb if count == 0
|
|
|
|
*/
|
|
|
|
static int fsl_diu_release(struct fb_info *info, int user)
|
|
|
|
{
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
int res = 0;
|
|
|
|
|
|
|
|
spin_lock(&diu_lock);
|
|
|
|
mfbi->count--;
|
|
|
|
if (mfbi->count == 0) {
|
|
|
|
pr_debug("release plane index %d\n", mfbi->index);
|
|
|
|
res = fsl_diu_disable_panel(info);
|
|
|
|
if (res < 0)
|
|
|
|
mfbi->count++;
|
|
|
|
}
|
|
|
|
spin_unlock(&diu_lock);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct fb_ops fsl_diu_ops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.fb_check_var = fsl_diu_check_var,
|
|
|
|
.fb_set_par = fsl_diu_set_par,
|
|
|
|
.fb_setcolreg = fsl_diu_setcolreg,
|
|
|
|
.fb_blank = fsl_diu_blank,
|
|
|
|
.fb_pan_display = fsl_diu_pan_display,
|
|
|
|
.fb_fillrect = cfb_fillrect,
|
|
|
|
.fb_copyarea = cfb_copyarea,
|
|
|
|
.fb_imageblit = cfb_imageblit,
|
|
|
|
.fb_ioctl = fsl_diu_ioctl,
|
|
|
|
.fb_open = fsl_diu_open,
|
|
|
|
.fb_release = fsl_diu_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int init_fbinfo(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
|
|
|
|
info->device = NULL;
|
|
|
|
info->var.activate = FB_ACTIVATE_NOW;
|
|
|
|
info->fbops = &fsl_diu_ops;
|
|
|
|
info->flags = FBINFO_FLAG_DEFAULT;
|
|
|
|
info->pseudo_palette = &mfbi->pseudo_palette;
|
|
|
|
|
|
|
|
/* Allocate colormap */
|
|
|
|
fb_alloc_cmap(&info->cmap, 16, 0);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-07-05 00:59:38 +08:00
|
|
|
static int __devinit install_fb(struct fb_info *info)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
const char *aoi_mode, *init_aoi_mode = "320x240";
|
2010-07-23 12:00:39 +08:00
|
|
|
struct fb_videomode *db = fsl_diu_mode_db;
|
|
|
|
unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db);
|
|
|
|
int has_default_mode = 1;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
|
|
|
if (init_fbinfo(info))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2010-07-23 12:00:39 +08:00
|
|
|
if (mfbi->index == 0) { /* plane 0 */
|
|
|
|
if (mfbi->edid_data) {
|
|
|
|
/* Now build modedb from EDID */
|
|
|
|
fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs);
|
|
|
|
fb_videomode_to_modelist(info->monspecs.modedb,
|
|
|
|
info->monspecs.modedb_len,
|
|
|
|
&info->modelist);
|
|
|
|
db = info->monspecs.modedb;
|
|
|
|
dbsize = info->monspecs.modedb_len;
|
|
|
|
}
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
aoi_mode = fb_mode;
|
2010-07-23 12:00:39 +08:00
|
|
|
} else {
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
aoi_mode = init_aoi_mode;
|
2010-07-23 12:00:39 +08:00
|
|
|
}
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
pr_debug("mode used = %s\n", aoi_mode);
|
2010-07-23 12:00:39 +08:00
|
|
|
rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize,
|
|
|
|
&fsl_diu_default_mode, default_bpp);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
switch (rc) {
|
|
|
|
case 1:
|
|
|
|
pr_debug("using mode specified in @mode\n");
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
pr_debug("using mode specified in @mode "
|
|
|
|
"with ignored refresh rate\n");
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
pr_debug("using mode default mode\n");
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
pr_debug("using mode from list\n");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
pr_debug("rc = %d\n", rc);
|
|
|
|
pr_debug("failed to find mode\n");
|
2010-07-23 12:00:39 +08:00
|
|
|
/*
|
|
|
|
* For plane 0 we continue and look into
|
|
|
|
* driver's internal modedb.
|
|
|
|
*/
|
|
|
|
if (mfbi->index == 0 && mfbi->edid_data)
|
|
|
|
has_default_mode = 0;
|
|
|
|
else
|
|
|
|
return -EINVAL;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2010-07-23 12:00:39 +08:00
|
|
|
if (!has_default_mode) {
|
|
|
|
rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
|
|
|
|
ARRAY_SIZE(fsl_diu_mode_db),
|
|
|
|
&fsl_diu_default_mode,
|
|
|
|
default_bpp);
|
|
|
|
if (rc > 0 && rc < 5)
|
|
|
|
has_default_mode = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Still not found, use preferred mode from database if any */
|
|
|
|
if (!has_default_mode && info->monspecs.modedb) {
|
|
|
|
struct fb_monspecs *specs = &info->monspecs;
|
|
|
|
struct fb_videomode *modedb = &specs->modedb[0];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get preferred timing. If not found,
|
|
|
|
* first mode in database will be used.
|
|
|
|
*/
|
|
|
|
if (specs->misc & FB_MISC_1ST_DETAIL) {
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < specs->modedb_len; i++) {
|
|
|
|
if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
|
|
|
|
modedb = &specs->modedb[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
info->var.bits_per_pixel = default_bpp;
|
|
|
|
fb_videomode_to_var(&info->var, modedb);
|
|
|
|
}
|
|
|
|
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
pr_debug("xres_virtual %d\n", info->var.xres_virtual);
|
|
|
|
pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
|
|
|
|
|
|
|
|
pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
|
|
|
|
pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
|
|
|
|
|
|
|
|
if (mfbi->type == MFB_TYPE_OFF)
|
|
|
|
mfbi->blank = FB_BLANK_NORMAL;
|
|
|
|
else
|
|
|
|
mfbi->blank = FB_BLANK_UNBLANK;
|
|
|
|
|
|
|
|
if (fsl_diu_check_var(&info->var, info)) {
|
|
|
|
printk(KERN_ERR "fb_check_var failed");
|
|
|
|
fb_dealloc_cmap(&info->cmap);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (register_framebuffer(info) < 0) {
|
|
|
|
printk(KERN_ERR "register_framebuffer failed");
|
|
|
|
unmap_video_memory(info);
|
|
|
|
fb_dealloc_cmap(&info->cmap);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
mfbi->registered = 1;
|
|
|
|
printk(KERN_INFO "fb%d: %s fb device registered successfully.\n",
|
|
|
|
info->node, info->fix.id);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-07-05 00:59:38 +08:00
|
|
|
static void uninstall_fb(struct fb_info *info)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
struct mfb_info *mfbi = info->par;
|
|
|
|
|
|
|
|
if (!mfbi->registered)
|
|
|
|
return;
|
|
|
|
|
2010-07-23 12:00:39 +08:00
|
|
|
if (mfbi->index == 0)
|
|
|
|
kfree(mfbi->edid_data);
|
|
|
|
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
unregister_framebuffer(info);
|
|
|
|
unmap_video_memory(info);
|
|
|
|
if (&info->cmap)
|
|
|
|
fb_dealloc_cmap(&info->cmap);
|
|
|
|
|
|
|
|
mfbi->registered = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct diu *hw = dr.diu_reg;
|
|
|
|
unsigned int status = in_be32(&hw->int_status);
|
|
|
|
|
|
|
|
if (status) {
|
|
|
|
/* This is the workaround for underrun */
|
|
|
|
if (status & INT_UNDRUN) {
|
|
|
|
out_be32(&hw->diu_mode, 0);
|
|
|
|
pr_debug("Err: DIU occurs underrun!\n");
|
|
|
|
udelay(1);
|
|
|
|
out_be32(&hw->diu_mode, 1);
|
|
|
|
}
|
|
|
|
#if defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
else if (status & INT_VSYNC) {
|
|
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < coherence_data_size;
|
|
|
|
i += d_cache_line_size)
|
|
|
|
__asm__ __volatile__ (
|
|
|
|
"dcbz 0, %[input]"
|
|
|
|
::[input]"r"(&coherence_data[i]));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int request_irq_local(int irq)
|
|
|
|
{
|
|
|
|
unsigned long status, ints;
|
|
|
|
struct diu *hw;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
hw = dr.diu_reg;
|
|
|
|
|
|
|
|
/* Read to clear the status */
|
|
|
|
status = in_be32(&hw->int_status);
|
|
|
|
|
2008-07-05 00:59:38 +08:00
|
|
|
ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (ret)
|
|
|
|
pr_info("Request diu IRQ failed.\n");
|
|
|
|
else {
|
|
|
|
ints = INT_PARERR | INT_LS_BF_VS;
|
|
|
|
#if !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
ints |= INT_VSYNC;
|
|
|
|
#endif
|
|
|
|
if (dr.mode == MFB_MODE2 || dr.mode == MFB_MODE3)
|
|
|
|
ints |= INT_VSYNC_WB;
|
|
|
|
|
|
|
|
/* Read to clear the status */
|
|
|
|
status = in_be32(&hw->int_status);
|
|
|
|
out_be32(&hw->int_mask, ints);
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void free_irq_local(int irq)
|
|
|
|
{
|
|
|
|
struct diu *hw = dr.diu_reg;
|
|
|
|
|
|
|
|
/* Disable all LCDC interrupt */
|
|
|
|
out_be32(&hw->int_mask, 0x1f);
|
|
|
|
|
2008-07-05 00:59:38 +08:00
|
|
|
free_irq(irq, NULL);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/*
|
|
|
|
* Power management hooks. Note that we won't be called from IRQ context,
|
|
|
|
* unlike the blank functions above, so we may sleep.
|
|
|
|
*/
|
2010-08-06 23:25:50 +08:00
|
|
|
static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
struct fsl_diu_data *machine_data;
|
|
|
|
|
2008-07-09 00:41:17 +08:00
|
|
|
machine_data = dev_get_drvdata(&ofdev->dev);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
disable_lcdc(machine_data->fsl_diu_info[0]);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-08-06 23:25:50 +08:00
|
|
|
static int fsl_diu_resume(struct platform_device *ofdev)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
struct fsl_diu_data *machine_data;
|
|
|
|
|
2008-07-09 00:41:17 +08:00
|
|
|
machine_data = dev_get_drvdata(&ofdev->dev);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
enable_lcdc(machine_data->fsl_diu_info[0]);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
#define fsl_diu_suspend NULL
|
|
|
|
#define fsl_diu_resume NULL
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
|
|
/* Align to 64-bit(8-byte), 32-byte, etc. */
|
2009-04-05 02:31:20 +08:00
|
|
|
static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size,
|
|
|
|
u32 bytes_align)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
u32 offset, ssize;
|
|
|
|
u32 mask;
|
|
|
|
dma_addr_t paddr = 0;
|
|
|
|
|
|
|
|
ssize = size + bytes_align;
|
2009-04-05 02:31:20 +08:00
|
|
|
buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA |
|
2008-07-05 00:59:38 +08:00
|
|
|
__GFP_ZERO);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (!buf->vaddr)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
buf->paddr = (__u32) paddr;
|
|
|
|
|
|
|
|
mask = bytes_align - 1;
|
|
|
|
offset = (u32)buf->paddr & mask;
|
|
|
|
if (offset) {
|
|
|
|
buf->offset = bytes_align - offset;
|
|
|
|
buf->paddr = (u32)buf->paddr + offset;
|
|
|
|
} else
|
|
|
|
buf->offset = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-04-05 02:31:20 +08:00
|
|
|
static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
|
|
|
|
u32 bytes_align)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
2009-04-05 02:31:20 +08:00
|
|
|
dma_free_coherent(dev, size + bytes_align,
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
buf->vaddr, (buf->paddr - buf->offset));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t store_monitor(struct device *device,
|
|
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
int old_monitor_port;
|
|
|
|
unsigned long val;
|
|
|
|
struct fsl_diu_data *machine_data =
|
|
|
|
container_of(attr, struct fsl_diu_data, dev_attr);
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 10, &val))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
old_monitor_port = machine_data->monitor_port;
|
|
|
|
machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);
|
|
|
|
|
|
|
|
if (old_monitor_port != machine_data->monitor_port) {
|
|
|
|
/* All AOIs need adjust pixel format
|
|
|
|
* fsl_diu_set_par only change the pixsel format here
|
|
|
|
* unlikely to fail. */
|
|
|
|
fsl_diu_set_par(machine_data->fsl_diu_info[0]);
|
|
|
|
fsl_diu_set_par(machine_data->fsl_diu_info[1]);
|
|
|
|
fsl_diu_set_par(machine_data->fsl_diu_info[2]);
|
|
|
|
fsl_diu_set_par(machine_data->fsl_diu_info[3]);
|
|
|
|
fsl_diu_set_par(machine_data->fsl_diu_info[4]);
|
|
|
|
}
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t show_monitor(struct device *device,
|
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
struct fsl_diu_data *machine_data =
|
|
|
|
container_of(attr, struct fsl_diu_data, dev_attr);
|
|
|
|
return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
|
|
|
|
}
|
|
|
|
|
2011-02-23 12:07:43 +08:00
|
|
|
static int __devinit fsl_diu_probe(struct platform_device *ofdev)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
2010-04-14 07:12:29 +08:00
|
|
|
struct device_node *np = ofdev->dev.of_node;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
struct mfb_info *mfbi;
|
|
|
|
phys_addr_t dummy_ad_addr;
|
|
|
|
int ret, i, error = 0;
|
|
|
|
struct resource res;
|
|
|
|
struct fsl_diu_data *machine_data;
|
2010-07-23 12:00:37 +08:00
|
|
|
int diu_mode;
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
|
|
|
machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL);
|
|
|
|
if (!machine_data)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
|
|
|
|
machine_data->fsl_diu_info[i] =
|
|
|
|
framebuffer_alloc(sizeof(struct mfb_info), &ofdev->dev);
|
|
|
|
if (!machine_data->fsl_diu_info[i]) {
|
|
|
|
dev_err(&ofdev->dev, "cannot allocate memory\n");
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto error2;
|
|
|
|
}
|
|
|
|
mfbi = machine_data->fsl_diu_info[i]->par;
|
|
|
|
memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
|
|
|
|
mfbi->parent = machine_data;
|
2010-07-23 12:00:39 +08:00
|
|
|
|
|
|
|
if (mfbi->index == 0) {
|
|
|
|
const u8 *prop;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
/* Get EDID */
|
|
|
|
prop = of_get_property(np, "edid", &len);
|
|
|
|
if (prop && len == EDID_LENGTH)
|
|
|
|
mfbi->edid_data = kmemdup(prop, EDID_LENGTH,
|
|
|
|
GFP_KERNEL);
|
|
|
|
}
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&ofdev->dev, "could not obtain DIU address\n");
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
if (!res.start) {
|
|
|
|
dev_err(&ofdev->dev, "invalid DIU address\n");
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
dev_dbg(&ofdev->dev, "%s, res.start: 0x%08x\n", __func__, res.start);
|
|
|
|
|
|
|
|
dr.diu_reg = ioremap(res.start, sizeof(struct diu));
|
|
|
|
if (!dr.diu_reg) {
|
|
|
|
dev_err(&ofdev->dev, "Err: can't map DIU registers!\n");
|
|
|
|
ret = -EFAULT;
|
|
|
|
goto error2;
|
|
|
|
}
|
|
|
|
|
2010-07-23 12:00:37 +08:00
|
|
|
diu_mode = in_be32(&dr.diu_reg->diu_mode);
|
|
|
|
if (diu_mode != MFB_MODE1)
|
|
|
|
out_be32(&dr.diu_reg->diu_mode, 0); /* disable DIU */
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
|
|
|
/* Get the IRQ of the DIU */
|
|
|
|
machine_data->irq = irq_of_parse_and_map(np, 0);
|
|
|
|
|
|
|
|
if (!machine_data->irq) {
|
|
|
|
dev_err(&ofdev->dev, "could not get DIU IRQ\n");
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
machine_data->monitor_port = monitor_port;
|
|
|
|
|
|
|
|
/* Area descriptor memory pool aligns to 64-bit boundary */
|
2009-04-05 02:31:20 +08:00
|
|
|
if (allocate_buf(&ofdev->dev, &pool.ad,
|
|
|
|
sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
/* Get memory for Gamma Table - 32-byte aligned memory */
|
2009-04-05 02:31:20 +08:00
|
|
|
if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) {
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
ret = -ENOMEM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
|
2009-04-05 02:31:20 +08:00
|
|
|
if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
|
|
|
|
32)) {
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
ret = -ENOMEM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
i = ARRAY_SIZE(machine_data->fsl_diu_info);
|
|
|
|
machine_data->dummy_ad = (struct diu_ad *)
|
|
|
|
((u32)pool.ad.vaddr + pool.ad.offset) + i;
|
|
|
|
machine_data->dummy_ad->paddr = pool.ad.paddr +
|
|
|
|
i * sizeof(struct diu_ad);
|
|
|
|
machine_data->dummy_aoi_virt = fsl_diu_alloc(64, &dummy_ad_addr);
|
|
|
|
if (!machine_data->dummy_aoi_virt) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
machine_data->dummy_ad->addr = cpu_to_le32(dummy_ad_addr);
|
|
|
|
machine_data->dummy_ad->pix_fmt = 0x88882317;
|
|
|
|
machine_data->dummy_ad->src_size_g_alpha = cpu_to_le32((4 << 12) | 4);
|
|
|
|
machine_data->dummy_ad->aoi_size = cpu_to_le32((4 << 16) | 2);
|
|
|
|
machine_data->dummy_ad->offset_xyi = 0;
|
|
|
|
machine_data->dummy_ad->offset_xyd = 0;
|
|
|
|
machine_data->dummy_ad->next_ad = 0;
|
|
|
|
|
2010-07-23 12:00:37 +08:00
|
|
|
/*
|
|
|
|
* Let DIU display splash screen if it was pre-initialized
|
|
|
|
* by the bootloader, set dummy area descriptor otherwise.
|
|
|
|
*/
|
|
|
|
if (diu_mode != MFB_MODE1)
|
|
|
|
out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
|
|
|
|
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
|
|
|
|
out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
|
|
|
|
machine_data->fsl_diu_info[i]->fix.smem_start = 0;
|
|
|
|
mfbi = machine_data->fsl_diu_info[i]->par;
|
|
|
|
mfbi->ad = (struct diu_ad *)((u32)pool.ad.vaddr
|
|
|
|
+ pool.ad.offset) + i;
|
|
|
|
mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad);
|
|
|
|
ret = install_fb(machine_data->fsl_diu_info[i]);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&ofdev->dev,
|
|
|
|
"Failed to register framebuffer %d\n",
|
|
|
|
i);
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (request_irq_local(machine_data->irq)) {
|
|
|
|
dev_err(machine_data->fsl_diu_info[0]->dev,
|
|
|
|
"could not request irq for diu.");
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
2010-04-07 05:34:52 +08:00
|
|
|
sysfs_attr_init(&machine_data->dev_attr.attr);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
machine_data->dev_attr.attr.name = "monitor";
|
|
|
|
machine_data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
|
|
|
|
machine_data->dev_attr.show = show_monitor;
|
|
|
|
machine_data->dev_attr.store = store_monitor;
|
|
|
|
error = device_create_file(machine_data->fsl_diu_info[0]->dev,
|
|
|
|
&machine_data->dev_attr);
|
|
|
|
if (error) {
|
|
|
|
dev_err(machine_data->fsl_diu_info[0]->dev,
|
|
|
|
"could not create sysfs %s file\n",
|
|
|
|
machine_data->dev_attr.attr.name);
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_set_drvdata(&ofdev->dev, machine_data);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
error:
|
|
|
|
for (i = ARRAY_SIZE(machine_data->fsl_diu_info);
|
|
|
|
i > 0; i--)
|
|
|
|
uninstall_fb(machine_data->fsl_diu_info[i - 1]);
|
|
|
|
if (pool.ad.vaddr)
|
2009-04-05 02:31:20 +08:00
|
|
|
free_buf(&ofdev->dev, &pool.ad,
|
|
|
|
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (pool.gamma.vaddr)
|
2009-04-05 02:31:20 +08:00
|
|
|
free_buf(&ofdev->dev, &pool.gamma, 768, 32);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (pool.cursor.vaddr)
|
2009-04-05 02:31:20 +08:00
|
|
|
free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
|
|
|
|
32);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (machine_data->dummy_aoi_virt)
|
|
|
|
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
|
|
|
|
iounmap(dr.diu_reg);
|
|
|
|
|
|
|
|
error2:
|
|
|
|
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
|
|
|
|
if (machine_data->fsl_diu_info[i])
|
|
|
|
framebuffer_release(machine_data->fsl_diu_info[i]);
|
|
|
|
kfree(machine_data);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2010-08-06 23:25:50 +08:00
|
|
|
static int fsl_diu_remove(struct platform_device *ofdev)
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
struct fsl_diu_data *machine_data;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
machine_data = dev_get_drvdata(&ofdev->dev);
|
|
|
|
disable_lcdc(machine_data->fsl_diu_info[0]);
|
|
|
|
free_irq_local(machine_data->irq);
|
|
|
|
for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
|
|
|
|
uninstall_fb(machine_data->fsl_diu_info[i - 1]);
|
|
|
|
if (pool.ad.vaddr)
|
2009-04-05 02:31:20 +08:00
|
|
|
free_buf(&ofdev->dev, &pool.ad,
|
|
|
|
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (pool.gamma.vaddr)
|
2009-04-05 02:31:20 +08:00
|
|
|
free_buf(&ofdev->dev, &pool.gamma, 768, 32);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (pool.cursor.vaddr)
|
2009-04-05 02:31:20 +08:00
|
|
|
free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
|
|
|
|
32);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (machine_data->dummy_aoi_virt)
|
|
|
|
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
|
|
|
|
iounmap(dr.diu_reg);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
|
|
|
|
if (machine_data->fsl_diu_info[i])
|
|
|
|
framebuffer_release(machine_data->fsl_diu_info[i]);
|
|
|
|
kfree(machine_data);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef MODULE
|
|
|
|
static int __init fsl_diu_setup(char *options)
|
|
|
|
{
|
|
|
|
char *opt;
|
|
|
|
unsigned long val;
|
|
|
|
|
|
|
|
if (!options || !*options)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
while ((opt = strsep(&options, ",")) != NULL) {
|
|
|
|
if (!*opt)
|
|
|
|
continue;
|
|
|
|
if (!strncmp(opt, "monitor=", 8)) {
|
|
|
|
if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
|
|
|
|
monitor_port = val;
|
|
|
|
} else if (!strncmp(opt, "bpp=", 4)) {
|
|
|
|
if (!strict_strtoul(opt + 4, 10, &val))
|
|
|
|
default_bpp = val;
|
|
|
|
} else
|
|
|
|
fb_mode = opt;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static struct of_device_id fsl_diu_match[] = {
|
2010-02-17 22:33:22 +08:00
|
|
|
#ifdef CONFIG_PPC_MPC512x
|
|
|
|
{
|
|
|
|
.compatible = "fsl,mpc5121-diu",
|
|
|
|
},
|
|
|
|
#endif
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
{
|
|
|
|
.compatible = "fsl,diu",
|
|
|
|
},
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, fsl_diu_match);
|
|
|
|
|
2011-02-23 12:07:43 +08:00
|
|
|
static struct platform_driver fsl_diu_driver = {
|
2010-04-14 07:13:02 +08:00
|
|
|
.driver = {
|
|
|
|
.name = "fsl_diu",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.of_match_table = fsl_diu_match,
|
|
|
|
},
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
.probe = fsl_diu_probe,
|
|
|
|
.remove = fsl_diu_remove,
|
|
|
|
.suspend = fsl_diu_suspend,
|
|
|
|
.resume = fsl_diu_resume,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init fsl_diu_init(void)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_NOT_COHERENT_CACHE
|
|
|
|
struct device_node *np;
|
|
|
|
const u32 *prop;
|
|
|
|
#endif
|
|
|
|
int ret;
|
|
|
|
#ifndef MODULE
|
|
|
|
char *option;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* For kernel boot options (in 'video=xxxfb:<options>' format)
|
|
|
|
*/
|
|
|
|
if (fb_get_options("fslfb", &option))
|
|
|
|
return -ENODEV;
|
|
|
|
fsl_diu_setup(option);
|
|
|
|
#endif
|
|
|
|
printk(KERN_INFO "Freescale DIU driver\n");
|
|
|
|
|
|
|
|
#ifdef CONFIG_NOT_COHERENT_CACHE
|
|
|
|
np = of_find_node_by_type(NULL, "cpu");
|
|
|
|
if (!np) {
|
|
|
|
printk(KERN_ERR "Err: can't find device node 'cpu'\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
prop = of_get_property(np, "d-cache-size", NULL);
|
2008-08-06 04:01:28 +08:00
|
|
|
if (prop == NULL) {
|
|
|
|
of_node_put(np);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
return -ENODEV;
|
2008-08-06 04:01:28 +08:00
|
|
|
}
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
|
|
|
|
/* Freescale PLRU requires 13/8 times the cache size to do a proper
|
|
|
|
displacement flush
|
|
|
|
*/
|
|
|
|
coherence_data_size = *prop * 13;
|
|
|
|
coherence_data_size /= 8;
|
|
|
|
|
|
|
|
prop = of_get_property(np, "d-cache-line-size", NULL);
|
2008-08-06 04:01:28 +08:00
|
|
|
if (prop == NULL) {
|
|
|
|
of_node_put(np);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
return -ENODEV;
|
2008-08-06 04:01:28 +08:00
|
|
|
}
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
d_cache_line_size = *prop;
|
|
|
|
|
|
|
|
of_node_put(np);
|
|
|
|
coherence_data = vmalloc(coherence_data_size);
|
|
|
|
if (!coherence_data)
|
|
|
|
return -ENOMEM;
|
|
|
|
#endif
|
2011-02-23 12:07:43 +08:00
|
|
|
ret = platform_driver_register(&fsl_diu_driver);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
if (ret) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"fsl-diu: failed to register platform driver\n");
|
|
|
|
#if defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
vfree(coherence_data);
|
|
|
|
#endif
|
|
|
|
iounmap(dr.diu_reg);
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit fsl_diu_exit(void)
|
|
|
|
{
|
2011-02-23 12:07:43 +08:00
|
|
|
platform_driver_unregister(&fsl_diu_driver);
|
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs
All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0. Changing pixel clock has no effect
on other fbs.
Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0
required command line parameters to preallocate memory for frame buffer diufb.
optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:
Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60
Bpp
bpp=32, bpp=24, or bpp=16
Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS
Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.
If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:15:34 +08:00
|
|
|
#if defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
vfree(coherence_data);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(fsl_diu_init);
|
|
|
|
module_exit(fsl_diu_exit);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
|
|
|
|
MODULE_DESCRIPTION("Freescale DIU framebuffer driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
module_param_named(mode, fb_mode, charp, 0);
|
|
|
|
MODULE_PARM_DESC(mode,
|
|
|
|
"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
|
|
|
|
module_param_named(bpp, default_bpp, ulong, 0);
|
|
|
|
MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
|
|
|
|
module_param_named(monitor, monitor_port, int, 0);
|
|
|
|
MODULE_PARM_DESC(monitor,
|
|
|
|
"Specify the monitor port (0, 1 or 2) if supported by the platform");
|
|
|
|
|