OpenCloudOS-Kernel/drivers/gpu/drm/sti/sti_hdmi.h

121 lines
3.2 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) STMicroelectronics SA 2014
* Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
*/
#ifndef _STI_HDMI_H_
#define _STI_HDMI_H_
#include <linux/hdmi.h>
#include <linux/platform_device.h>
#include <media/cec-notifier.h>
#include <drm/drm_modes.h>
#include <drm/drm_property.h>
#define HDMI_STA 0x0010
#define HDMI_STA_DLL_LCK BIT(5)
#define HDMI_STA_HOT_PLUG BIT(4)
struct sti_hdmi;
struct hdmi_phy_ops {
bool (*start)(struct sti_hdmi *hdmi);
void (*stop)(struct sti_hdmi *hdmi);
};
struct hdmi_audio_params {
bool enabled;
unsigned int sample_width;
unsigned int sample_rate;
struct hdmi_audio_infoframe cea;
};
static const struct drm_prop_enum_list colorspace_mode_names[] = {
{ HDMI_COLORSPACE_RGB, "rgb" },
{ HDMI_COLORSPACE_YUV422, "yuv422" },
{ HDMI_COLORSPACE_YUV444, "yuv444" },
};
#define DEFAULT_COLORSPACE_MODE HDMI_COLORSPACE_RGB
/**
* STI hdmi structure
*
* @dev: driver device
* @drm_dev: pointer to drm device
* @mode: current display mode selected
* @regs: hdmi register
* @syscfg: syscfg register for pll rejection configuration
* @clk_pix: hdmi pixel clock
* @clk_tmds: hdmi tmds clock
* @clk_phy: hdmi phy clock
* @clk_audio: hdmi audio clock
* @irq: hdmi interrupt number
* @irq_status: interrupt status register
* @phy_ops: phy start/stop operations
* @enabled: true if hdmi is enabled else false
* @hpd: hot plug detect status
* @wait_event: wait event
* @event_received: wait event status
* @reset: reset control of the hdmi phy
* @ddc_adapt: i2c ddc adapter
* @colorspace: current colorspace selected
* @hdmi_monitor: true if HDMI monitor detected else DVI monitor assumed
* @audio_pdev: ASoC hdmi-codec platform device
* @audio: hdmi audio parameters.
* @drm_connector: hdmi connector
* @notifier: hotplug detect notifier
*/
struct sti_hdmi {
struct device dev;
struct drm_device *drm_dev;
struct drm_display_mode mode;
void __iomem *regs;
void __iomem *syscfg;
struct clk *clk_pix;
struct clk *clk_tmds;
struct clk *clk_phy;
struct clk *clk_audio;
int irq;
u32 irq_status;
struct hdmi_phy_ops *phy_ops;
bool enabled;
bool hpd;
wait_queue_head_t wait_event;
bool event_received;
struct reset_control *reset;
struct i2c_adapter *ddc_adapt;
enum hdmi_colorspace colorspace;
bool hdmi_monitor;
struct platform_device *audio_pdev;
struct hdmi_audio_params audio;
struct drm_connector *drm_connector;
struct cec_notifier *notifier;
};
u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset);
/**
* hdmi phy config structure
*
* A pointer to an array of these structures is passed to a TMDS (HDMI) output
* via the control interface to provide board and SoC specific
* configurations of the HDMI PHY. Each entry in the array specifies a hardware
* specific configuration for a given TMDS clock frequency range.
*
* @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to
* @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to
* @config: SoC specific register configuration
*/
struct hdmi_phy_config {
u32 min_tmds_freq;
u32 max_tmds_freq;
u32 config[4];
};
#endif