DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
/*
|
|
|
|
* Copyright © 2006 Intel Corporation
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the next
|
|
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
|
|
* Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
|
|
* DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Eric Anholt <eric@anholt.net>
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "dvo.h"
|
|
|
|
|
|
|
|
#define CH7017_TV_DISPLAY_MODE 0x00
|
|
|
|
#define CH7017_FLICKER_FILTER 0x01
|
|
|
|
#define CH7017_VIDEO_BANDWIDTH 0x02
|
|
|
|
#define CH7017_TEXT_ENHANCEMENT 0x03
|
|
|
|
#define CH7017_START_ACTIVE_VIDEO 0x04
|
|
|
|
#define CH7017_HORIZONTAL_POSITION 0x05
|
|
|
|
#define CH7017_VERTICAL_POSITION 0x06
|
|
|
|
#define CH7017_BLACK_LEVEL 0x07
|
|
|
|
#define CH7017_CONTRAST_ENHANCEMENT 0x08
|
|
|
|
#define CH7017_TV_PLL 0x09
|
|
|
|
#define CH7017_TV_PLL_M 0x0a
|
|
|
|
#define CH7017_TV_PLL_N 0x0b
|
|
|
|
#define CH7017_SUB_CARRIER_0 0x0c
|
|
|
|
#define CH7017_CIV_CONTROL 0x10
|
|
|
|
#define CH7017_CIV_0 0x11
|
|
|
|
#define CH7017_CHROMA_BOOST 0x14
|
|
|
|
#define CH7017_CLOCK_MODE 0x1c
|
|
|
|
#define CH7017_INPUT_CLOCK 0x1d
|
|
|
|
#define CH7017_GPIO_CONTROL 0x1e
|
|
|
|
#define CH7017_INPUT_DATA_FORMAT 0x1f
|
|
|
|
#define CH7017_CONNECTION_DETECT 0x20
|
|
|
|
#define CH7017_DAC_CONTROL 0x21
|
|
|
|
#define CH7017_BUFFERED_CLOCK_OUTPUT 0x22
|
|
|
|
#define CH7017_DEFEAT_VSYNC 0x47
|
|
|
|
#define CH7017_TEST_PATTERN 0x48
|
|
|
|
|
|
|
|
#define CH7017_POWER_MANAGEMENT 0x49
|
|
|
|
/** Enables the TV output path. */
|
|
|
|
#define CH7017_TV_EN (1 << 0)
|
|
|
|
#define CH7017_DAC0_POWER_DOWN (1 << 1)
|
|
|
|
#define CH7017_DAC1_POWER_DOWN (1 << 2)
|
|
|
|
#define CH7017_DAC2_POWER_DOWN (1 << 3)
|
|
|
|
#define CH7017_DAC3_POWER_DOWN (1 << 4)
|
|
|
|
/** Powers down the TV out block, and DAC0-3 */
|
|
|
|
#define CH7017_TV_POWER_DOWN_EN (1 << 5)
|
|
|
|
|
|
|
|
#define CH7017_VERSION_ID 0x4a
|
|
|
|
|
|
|
|
#define CH7017_DEVICE_ID 0x4b
|
|
|
|
#define CH7017_DEVICE_ID_VALUE 0x1b
|
|
|
|
#define CH7018_DEVICE_ID_VALUE 0x1a
|
|
|
|
#define CH7019_DEVICE_ID_VALUE 0x19
|
|
|
|
|
|
|
|
#define CH7017_XCLK_D2_ADJUST 0x53
|
|
|
|
#define CH7017_UP_SCALER_COEFF_0 0x55
|
|
|
|
#define CH7017_UP_SCALER_COEFF_1 0x56
|
|
|
|
#define CH7017_UP_SCALER_COEFF_2 0x57
|
|
|
|
#define CH7017_UP_SCALER_COEFF_3 0x58
|
|
|
|
#define CH7017_UP_SCALER_COEFF_4 0x59
|
|
|
|
#define CH7017_UP_SCALER_VERTICAL_INC_0 0x5a
|
|
|
|
#define CH7017_UP_SCALER_VERTICAL_INC_1 0x5b
|
|
|
|
#define CH7017_GPIO_INVERT 0x5c
|
|
|
|
#define CH7017_UP_SCALER_HORIZONTAL_INC_0 0x5d
|
|
|
|
#define CH7017_UP_SCALER_HORIZONTAL_INC_1 0x5e
|
|
|
|
|
|
|
|
#define CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT 0x5f
|
|
|
|
/**< Low bits of horizontal active pixel input */
|
|
|
|
|
|
|
|
#define CH7017_ACTIVE_INPUT_LINE_OUTPUT 0x60
|
|
|
|
/** High bits of horizontal active pixel input */
|
|
|
|
#define CH7017_LVDS_HAP_INPUT_MASK (0x7 << 0)
|
|
|
|
/** High bits of vertical active line output */
|
|
|
|
#define CH7017_LVDS_VAL_HIGH_MASK (0x7 << 3)
|
|
|
|
|
|
|
|
#define CH7017_VERTICAL_ACTIVE_LINE_OUTPUT 0x61
|
|
|
|
/**< Low bits of vertical active line output */
|
|
|
|
|
|
|
|
#define CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT 0x62
|
|
|
|
/**< Low bits of horizontal active pixel output */
|
|
|
|
|
|
|
|
#define CH7017_LVDS_POWER_DOWN 0x63
|
|
|
|
/** High bits of horizontal active pixel output */
|
|
|
|
#define CH7017_LVDS_HAP_HIGH_MASK (0x7 << 0)
|
|
|
|
/** Enables the LVDS power down state transition */
|
|
|
|
#define CH7017_LVDS_POWER_DOWN_EN (1 << 6)
|
|
|
|
/** Enables the LVDS upscaler */
|
|
|
|
#define CH7017_LVDS_UPSCALER_EN (1 << 7)
|
|
|
|
#define CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED 0x08
|
|
|
|
|
|
|
|
#define CH7017_LVDS_ENCODING 0x64
|
|
|
|
#define CH7017_LVDS_DITHER_2D (1 << 2)
|
|
|
|
#define CH7017_LVDS_DITHER_DIS (1 << 3)
|
|
|
|
#define CH7017_LVDS_DUAL_CHANNEL_EN (1 << 4)
|
|
|
|
#define CH7017_LVDS_24_BIT (1 << 5)
|
|
|
|
|
|
|
|
#define CH7017_LVDS_ENCODING_2 0x65
|
|
|
|
|
|
|
|
#define CH7017_LVDS_PLL_CONTROL 0x66
|
|
|
|
/** Enables the LVDS panel output path */
|
|
|
|
#define CH7017_LVDS_PANEN (1 << 0)
|
|
|
|
/** Enables the LVDS panel backlight */
|
|
|
|
#define CH7017_LVDS_BKLEN (1 << 3)
|
|
|
|
|
|
|
|
#define CH7017_POWER_SEQUENCING_T1 0x67
|
|
|
|
#define CH7017_POWER_SEQUENCING_T2 0x68
|
|
|
|
#define CH7017_POWER_SEQUENCING_T3 0x69
|
|
|
|
#define CH7017_POWER_SEQUENCING_T4 0x6a
|
|
|
|
#define CH7017_POWER_SEQUENCING_T5 0x6b
|
|
|
|
#define CH7017_GPIO_DRIVER_TYPE 0x6c
|
|
|
|
#define CH7017_GPIO_DATA 0x6d
|
|
|
|
#define CH7017_GPIO_DIRECTION_CONTROL 0x6e
|
|
|
|
|
|
|
|
#define CH7017_LVDS_PLL_FEEDBACK_DIV 0x71
|
|
|
|
# define CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT 4
|
|
|
|
# define CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT 0
|
|
|
|
# define CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED 0x80
|
|
|
|
|
|
|
|
#define CH7017_LVDS_PLL_VCO_CONTROL 0x72
|
|
|
|
# define CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED 0x80
|
|
|
|
# define CH7017_LVDS_PLL_VCO_SHIFT 4
|
|
|
|
# define CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT 0
|
|
|
|
|
|
|
|
#define CH7017_OUTPUTS_ENABLE 0x73
|
|
|
|
# define CH7017_CHARGE_PUMP_LOW 0x0
|
|
|
|
# define CH7017_CHARGE_PUMP_HIGH 0x3
|
|
|
|
# define CH7017_LVDS_CHANNEL_A (1 << 3)
|
|
|
|
# define CH7017_LVDS_CHANNEL_B (1 << 4)
|
|
|
|
# define CH7017_TV_DAC_A (1 << 5)
|
|
|
|
# define CH7017_TV_DAC_B (1 << 6)
|
|
|
|
# define CH7017_DDC_SELECT_DC2 (1 << 7)
|
|
|
|
|
|
|
|
#define CH7017_LVDS_OUTPUT_AMPLITUDE 0x74
|
|
|
|
#define CH7017_LVDS_PLL_EMI_REDUCTION 0x75
|
|
|
|
#define CH7017_LVDS_POWER_DOWN_FLICKER 0x76
|
|
|
|
|
|
|
|
#define CH7017_LVDS_CONTROL_2 0x78
|
|
|
|
# define CH7017_LOOP_FILTER_SHIFT 5
|
|
|
|
# define CH7017_PHASE_DETECTOR_SHIFT 0
|
|
|
|
|
|
|
|
#define CH7017_BANG_LIMIT_CONTROL 0x7f
|
|
|
|
|
|
|
|
struct ch7017_priv {
|
2010-04-03 06:24:27 +08:00
|
|
|
uint8_t dummy;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static void ch7017_dump_regs(struct intel_dvo_device *dvo);
|
2012-08-13 01:27:12 +08:00
|
|
|
static void ch7017_dpms(struct intel_dvo_device *dvo, bool enable);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-09-29 06:33:17 +08:00
|
|
|
static bool ch7017_read(struct intel_dvo_device *dvo, u8 addr, u8 *val)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
struct i2c_msg msgs[] = {
|
|
|
|
{
|
2009-05-31 03:16:25 +08:00
|
|
|
.addr = dvo->slave_addr,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.flags = 0,
|
|
|
|
.len = 1,
|
2010-09-29 06:33:17 +08:00
|
|
|
.buf = &addr,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
},
|
|
|
|
{
|
2009-05-31 03:16:25 +08:00
|
|
|
.addr = dvo->slave_addr,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.flags = I2C_M_RD,
|
|
|
|
.len = 1,
|
2010-09-29 06:33:17 +08:00
|
|
|
.buf = val,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
};
|
2010-09-29 06:33:17 +08:00
|
|
|
return i2c_transfer(dvo->i2c_bus, msgs, 2) == 2;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-09-29 06:33:17 +08:00
|
|
|
static bool ch7017_write(struct intel_dvo_device *dvo, u8 addr, u8 val)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-09-29 06:33:17 +08:00
|
|
|
uint8_t buf[2] = { addr, val };
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct i2c_msg msg = {
|
2009-05-31 03:16:25 +08:00
|
|
|
.addr = dvo->slave_addr,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.flags = 0,
|
|
|
|
.len = 2,
|
2010-09-29 06:33:17 +08:00
|
|
|
.buf = buf,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
};
|
2010-09-29 06:33:17 +08:00
|
|
|
return i2c_transfer(dvo->i2c_bus, &msg, 1) == 1;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/** Probes for a CH7017 on the given bus and slave address. */
|
|
|
|
static bool ch7017_init(struct intel_dvo_device *dvo,
|
2009-05-31 03:16:25 +08:00
|
|
|
struct i2c_adapter *adapter)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
struct ch7017_priv *priv;
|
2010-09-29 06:33:17 +08:00
|
|
|
const char *str;
|
|
|
|
u8 val;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
priv = kzalloc(sizeof(struct ch7017_priv), GFP_KERNEL);
|
|
|
|
if (priv == NULL)
|
|
|
|
return false;
|
|
|
|
|
2009-05-31 03:16:25 +08:00
|
|
|
dvo->i2c_bus = adapter;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
dvo->dev_priv = priv;
|
|
|
|
|
|
|
|
if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
|
|
|
|
goto fail;
|
|
|
|
|
2010-09-29 06:33:17 +08:00
|
|
|
switch (val) {
|
|
|
|
case CH7017_DEVICE_ID_VALUE:
|
|
|
|
str = "ch7017";
|
|
|
|
break;
|
|
|
|
case CH7018_DEVICE_ID_VALUE:
|
|
|
|
str = "ch7018";
|
|
|
|
break;
|
|
|
|
case CH7019_DEVICE_ID_VALUE:
|
|
|
|
str = "ch7019";
|
|
|
|
break;
|
|
|
|
default:
|
2009-10-09 11:39:43 +08:00
|
|
|
DRM_DEBUG_KMS("ch701x not detected, got %d: from %s "
|
2010-09-29 06:33:17 +08:00
|
|
|
"slave %d.\n",
|
2011-08-17 03:34:10 +08:00
|
|
|
val, adapter->name, dvo->slave_addr);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
2010-09-29 06:33:17 +08:00
|
|
|
DRM_DEBUG_KMS("%s detected on %s, addr %d\n",
|
|
|
|
str, adapter->name, dvo->slave_addr);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return true;
|
2010-09-29 06:33:17 +08:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
fail:
|
|
|
|
kfree(priv);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo)
|
|
|
|
{
|
2010-12-30 20:54:00 +08:00
|
|
|
return connector_status_connected;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo,
|
|
|
|
struct drm_display_mode *mode)
|
|
|
|
{
|
|
|
|
if (mode->clock > 160000)
|
|
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
|
|
|
|
return MODE_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ch7017_mode_set(struct intel_dvo_device *dvo,
|
2015-09-08 18:40:49 +08:00
|
|
|
const struct drm_display_mode *mode,
|
|
|
|
const struct drm_display_mode *adjusted_mode)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
uint8_t lvds_pll_feedback_div, lvds_pll_vco_control;
|
|
|
|
uint8_t outputs_enable, lvds_control_2, lvds_power_down;
|
|
|
|
uint8_t horizontal_active_pixel_input;
|
|
|
|
uint8_t horizontal_active_pixel_output, vertical_active_line_output;
|
|
|
|
uint8_t active_input_line_output;
|
|
|
|
|
2009-10-09 11:39:43 +08:00
|
|
|
DRM_DEBUG_KMS("Registers before mode setting\n");
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
ch7017_dump_regs(dvo);
|
|
|
|
|
|
|
|
/* LVDS PLL settings from page 75 of 7017-7017ds.pdf*/
|
|
|
|
if (mode->clock < 100000) {
|
|
|
|
outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_LOW;
|
|
|
|
lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
|
|
|
|
(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
|
|
|
|
(13 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
|
|
|
|
lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
|
|
|
|
(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
|
|
|
|
(3 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
|
|
|
|
lvds_control_2 = (1 << CH7017_LOOP_FILTER_SHIFT) |
|
|
|
|
(0 << CH7017_PHASE_DETECTOR_SHIFT);
|
|
|
|
} else {
|
|
|
|
outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_HIGH;
|
|
|
|
lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
|
|
|
|
(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
|
|
|
|
(3 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
|
|
|
|
lvds_pll_feedback_div = 35;
|
|
|
|
lvds_control_2 = (3 << CH7017_LOOP_FILTER_SHIFT) |
|
|
|
|
(0 << CH7017_PHASE_DETECTOR_SHIFT);
|
|
|
|
if (1) { /* XXX: dual channel panel detection. Assume yes for now. */
|
|
|
|
outputs_enable |= CH7017_LVDS_CHANNEL_B;
|
|
|
|
lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
|
|
|
|
(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
|
|
|
|
(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
|
|
|
|
} else {
|
|
|
|
lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
|
|
|
|
(1 << CH7017_LVDS_PLL_VCO_SHIFT) |
|
|
|
|
(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
horizontal_active_pixel_input = mode->hdisplay & 0x00ff;
|
|
|
|
|
|
|
|
vertical_active_line_output = mode->vdisplay & 0x00ff;
|
|
|
|
horizontal_active_pixel_output = mode->hdisplay & 0x00ff;
|
|
|
|
|
|
|
|
active_input_line_output = ((mode->hdisplay & 0x0700) >> 8) |
|
|
|
|
(((mode->vdisplay & 0x0700) >> 8) << 3);
|
|
|
|
|
|
|
|
lvds_power_down = CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED |
|
|
|
|
(mode->hdisplay & 0x0700) >> 8;
|
|
|
|
|
2012-08-13 01:27:12 +08:00
|
|
|
ch7017_dpms(dvo, false);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT,
|
|
|
|
horizontal_active_pixel_input);
|
|
|
|
ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT,
|
|
|
|
horizontal_active_pixel_output);
|
|
|
|
ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT,
|
|
|
|
vertical_active_line_output);
|
|
|
|
ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT,
|
|
|
|
active_input_line_output);
|
|
|
|
ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, lvds_pll_vco_control);
|
|
|
|
ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, lvds_pll_feedback_div);
|
|
|
|
ch7017_write(dvo, CH7017_LVDS_CONTROL_2, lvds_control_2);
|
|
|
|
ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, outputs_enable);
|
|
|
|
|
|
|
|
/* Turn the LVDS back on with new settings. */
|
|
|
|
ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, lvds_power_down);
|
|
|
|
|
2009-10-09 11:39:43 +08:00
|
|
|
DRM_DEBUG_KMS("Registers after mode setting\n");
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
ch7017_dump_regs(dvo);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* set the CH7017 power state */
|
2012-08-13 01:27:12 +08:00
|
|
|
static void ch7017_dpms(struct intel_dvo_device *dvo, bool enable)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
uint8_t val;
|
|
|
|
|
|
|
|
ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val);
|
|
|
|
|
|
|
|
/* Turn off TV/VGA, and never turn it on since we don't support it. */
|
|
|
|
ch7017_write(dvo, CH7017_POWER_MANAGEMENT,
|
|
|
|
CH7017_DAC0_POWER_DOWN |
|
|
|
|
CH7017_DAC1_POWER_DOWN |
|
|
|
|
CH7017_DAC2_POWER_DOWN |
|
|
|
|
CH7017_DAC3_POWER_DOWN |
|
|
|
|
CH7017_TV_POWER_DOWN_EN);
|
|
|
|
|
2012-08-13 01:27:12 +08:00
|
|
|
if (enable) {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
/* Turn on the LVDS */
|
|
|
|
ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
|
|
|
|
val & ~CH7017_LVDS_POWER_DOWN_EN);
|
|
|
|
} else {
|
|
|
|
/* Turn off the LVDS */
|
|
|
|
ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
|
|
|
|
val | CH7017_LVDS_POWER_DOWN_EN);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* XXX: Should actually wait for update power status somehow */
|
2010-09-29 06:33:17 +08:00
|
|
|
msleep(20);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2012-07-02 21:09:45 +08:00
|
|
|
static bool ch7017_get_hw_state(struct intel_dvo_device *dvo)
|
|
|
|
{
|
|
|
|
uint8_t val;
|
|
|
|
|
|
|
|
ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val);
|
|
|
|
|
|
|
|
if (val & CH7017_LVDS_POWER_DOWN_EN)
|
|
|
|
return false;
|
|
|
|
else
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
static void ch7017_dump_regs(struct intel_dvo_device *dvo)
|
|
|
|
{
|
|
|
|
uint8_t val;
|
|
|
|
|
|
|
|
#define DUMP(reg) \
|
|
|
|
do { \
|
|
|
|
ch7017_read(dvo, reg, &val); \
|
2009-10-09 11:39:43 +08:00
|
|
|
DRM_DEBUG_KMS(#reg ": %02x\n", val); \
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
} while (0)
|
|
|
|
|
|
|
|
DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT);
|
|
|
|
DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT);
|
|
|
|
DUMP(CH7017_VERTICAL_ACTIVE_LINE_OUTPUT);
|
|
|
|
DUMP(CH7017_ACTIVE_INPUT_LINE_OUTPUT);
|
|
|
|
DUMP(CH7017_LVDS_PLL_VCO_CONTROL);
|
|
|
|
DUMP(CH7017_LVDS_PLL_FEEDBACK_DIV);
|
|
|
|
DUMP(CH7017_LVDS_CONTROL_2);
|
|
|
|
DUMP(CH7017_OUTPUTS_ENABLE);
|
|
|
|
DUMP(CH7017_LVDS_POWER_DOWN);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ch7017_destroy(struct intel_dvo_device *dvo)
|
|
|
|
{
|
|
|
|
struct ch7017_priv *priv = dvo->dev_priv;
|
|
|
|
|
|
|
|
if (priv) {
|
|
|
|
kfree(priv);
|
|
|
|
dvo->dev_priv = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-12-09 04:55:27 +08:00
|
|
|
const struct intel_dvo_dev_ops ch7017_ops = {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.init = ch7017_init,
|
|
|
|
.detect = ch7017_detect,
|
|
|
|
.mode_valid = ch7017_mode_valid,
|
|
|
|
.mode_set = ch7017_mode_set,
|
|
|
|
.dpms = ch7017_dpms,
|
2012-07-02 21:09:45 +08:00
|
|
|
.get_hw_state = ch7017_get_hw_state,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.dump_regs = ch7017_dump_regs,
|
|
|
|
.destroy = ch7017_destroy,
|
|
|
|
};
|