OpenCloudOS-Kernel/Documentation/security/self-protection.rst

317 lines
14 KiB
ReStructuredText
Raw Normal View History

======================
Kernel Self-Protection
======================
Kernel self-protection is the design and implementation of systems and
structures within the Linux kernel to protect against security flaws in
the kernel itself. This covers a wide range of issues, including removing
entire classes of bugs, blocking security flaw exploitation methods,
and actively detecting attack attempts. Not all topics are explored in
this document, but it should serve as a reasonable starting point and
answer any frequently asked questions. (Patches welcome, of course!)
In the worst-case scenario, we assume an unprivileged local attacker
has arbitrary read and write access to the kernel's memory. In many
cases, bugs being exploited will not provide this level of access,
but with systems in place that defend against the worst case we'll
cover the more limited cases as well. A higher bar, and one that should
still be kept in mind, is protecting the kernel against a _privileged_
local attacker, since the root user has access to a vastly increased
attack surface. (Especially when they have the ability to load arbitrary
kernel modules.)
The goals for successful self-protection systems would be that they
are effective, on by default, require no opt-in by developers, have no
performance impact, do not impede kernel debugging, and have tests. It
is uncommon that all these goals can be met, but it is worth explicitly
mentioning them, since these aspects need to be explored, dealt with,
and/or accepted.
Attack Surface Reduction
========================
The most fundamental defense against security exploits is to reduce the
areas of the kernel that can be used to redirect execution. This ranges
from limiting the exposed APIs available to userspace, making in-kernel
APIs hard to use incorrectly, minimizing the areas of writable kernel
memory, etc.
Strict kernel memory permissions
--------------------------------
When all of kernel memory is writable, it becomes trivial for attacks
to redirect execution flow. To reduce the availability of these targets
the kernel needs to protect its memory with a tight set of permissions.
Executable code and read-only data must not be writable
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Any areas of the kernel with executable memory must not be writable.
While this obviously includes the kernel text itself, we must consider
all additional places too: kernel modules, JIT memory, etc. (There are
temporary exceptions to this rule to support things like instruction
alternatives, breakpoints, kprobes, etc. If these must exist in a
kernel, they are implemented in a way where the memory is temporarily
made writable during the update, and then returned to the original
permissions.)
In support of this are ``CONFIG_STRICT_KERNEL_RWX`` and
``CONFIG_STRICT_MODULE_RWX``, which seek to make sure that code is not
writable, data is not executable, and read-only data is neither writable
nor executable.
Most architectures have these options on by default and not user selectable.
For some architectures like arm that wish to have these be selectable,
the architecture Kconfig can select ARCH_OPTIONAL_KERNEL_RWX to enable
a Kconfig prompt. ``CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT`` determines
the default setting when ARCH_OPTIONAL_KERNEL_RWX is enabled.
Function pointers and sensitive variables must not be writable
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vast areas of kernel memory contain function pointers that are looked
up by the kernel and used to continue execution (e.g. descriptor/vector
tables, file/network/etc operation structures, etc). The number of these
variables must be reduced to an absolute minimum.
Many such variables can be made read-only by setting them "const"
so that they live in the .rodata section instead of the .data section
of the kernel, gaining the protection of the kernel's strict memory
permissions as described above.
For variables that are initialized once at ``__init`` time, these can
be marked with the ``__ro_after_init`` attribute.
What remains are variables that are updated rarely (e.g. GDT). These
will need another infrastructure (similar to the temporary exceptions
made to kernel code mentioned above) that allow them to spend the rest
of their lifetime read-only. (For example, when being updated, only the
CPU thread performing the update would be given uninterruptible write
access to the memory.)
Segregation of kernel memory from userspace memory
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The kernel must never execute userspace memory. The kernel must also never
access userspace memory without explicit expectation to do so. These
rules can be enforced either by support of hardware-based restrictions
(x86's SMEP/SMAP, ARM's PXN/PAN) or via emulation (ARM's Memory Domains).
By blocking userspace memory in this way, execution and data parsing
cannot be passed to trivially-controlled userspace memory, forcing
attacks to operate entirely in kernel memory.
Reduced access to syscalls
--------------------------
One trivial way to eliminate many syscalls for 64-bit systems is building
without ``CONFIG_COMPAT``. However, this is rarely a feasible scenario.
The "seccomp" system provides an opt-in feature made available to
userspace, which provides a way to reduce the number of kernel entry
points available to a running process. This limits the breadth of kernel
code that can be reached, possibly reducing the availability of a given
bug to an attack.
An area of improvement would be creating viable ways to keep access to
things like compat, user namespaces, BPF creation, and perf limited only
to trusted processes. This would keep the scope of kernel entry points
restricted to the more regular set of normally available to unprivileged
userspace.
Restricting access to kernel modules
------------------------------------
The kernel should never allow an unprivileged user the ability to
load specific kernel modules, since that would provide a facility to
unexpectedly extend the available attack surface. (The on-demand loading
of modules via their predefined subsystems, e.g. MODULE_ALIAS_*, is
considered "expected" here, though additional consideration should be
given even to these.) For example, loading a filesystem module via an
unprivileged socket API is nonsense: only the root or physically local
user should trigger filesystem module loading. (And even this can be up
for debate in some scenarios.)
To protect against even privileged users, systems may need to either
disable module loading entirely (e.g. monolithic kernel builds or
modules_disabled sysctl), or provide signed modules (e.g.
``CONFIG_MODULE_SIG_FORCE``, or dm-crypt with LoadPin), to keep from having
root load arbitrary kernel code via the module loader interface.
Memory integrity
================
There are many memory structures in the kernel that are regularly abused
to gain execution control during an attack, By far the most commonly
understood is that of the stack buffer overflow in which the return
address stored on the stack is overwritten. Many other examples of this
kind of attack exist, and protections exist to defend against them.
Stack buffer overflow
---------------------
The classic stack buffer overflow involves writing past the expected end
of a variable stored on the stack, ultimately writing a controlled value
to the stack frame's stored return address. The most widely used defense
is the presence of a stack canary between the stack variables and the
Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables The changes to automatically test for working stack protector compiler support in the Kconfig files removed the special STACKPROTECTOR_AUTO option that picked the strongest stack protector that the compiler supported. That was all a nice cleanup - it makes no sense to have the AUTO case now that the Kconfig phase can just determine the compiler support directly. HOWEVER. It also meant that doing "make oldconfig" would now _disable_ the strong stackprotector if you had AUTO enabled, because in a legacy config file, the sane stack protector configuration would look like CONFIG_HAVE_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_NONE is not set # CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_STACKPROTECTOR_AUTO=y and when you ran this through "make oldconfig" with the Kbuild changes, it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version used to be disabled (because it was really enabled by AUTO), and would disable it in the new config, resulting in: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_HAS_SANE_STACKPROTECTOR=y That's dangerously subtle - people could suddenly find themselves with the weaker stack protector setup without even realizing. The solution here is to just rename not just the old RECULAR stack protector option, but also the strong one. This does that by just removing the CC_ prefix entirely for the user choices, because it really is not about the compiler support (the compiler support now instead automatially impacts _visibility_ of the options to users). This results in "make oldconfig" actually asking the user for their choice, so that we don't have any silent subtle security model changes. The end result would generally look like this: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_CC_HAS_SANE_STACKPROTECTOR=y where the "CC_" versions really are about internal compiler infrastructure, not the user selections. Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-14 11:21:18 +08:00
return address (``CONFIG_STACKPROTECTOR``), which is verified just before
the function returns. Other defenses include things like shadow stacks.
Stack depth overflow
--------------------
A less well understood attack is using a bug that triggers the
kernel to consume stack memory with deep function calls or large stack
allocations. With this attack it is possible to write beyond the end of
the kernel's preallocated stack space and into sensitive structures. Two
important changes need to be made for better protections: moving the
sensitive thread_info structure elsewhere, and adding a faulting memory
hole at the bottom of the stack to catch these overflows.
Heap memory integrity
---------------------
The structures used to track heap free lists can be sanity-checked during
allocation and freeing to make sure they aren't being used to manipulate
other memory areas.
Counter integrity
-----------------
Many places in the kernel use atomic counters to track object references
or perform similar lifetime management. When these counters can be made
to wrap (over or under) this traditionally exposes a use-after-free
flaw. By trapping atomic wrapping, this class of bug vanishes.
Size calculation overflow detection
-----------------------------------
Similar to counter overflow, integer overflows (usually size calculations)
need to be detected at runtime to kill this class of bug, which
traditionally leads to being able to write past the end of kernel buffers.
Probabilistic defenses
======================
While many protections can be considered deterministic (e.g. read-only
memory cannot be written to), some protections provide only statistical
defense, in that an attack must gather enough information about a
running system to overcome the defense. While not perfect, these do
provide meaningful defenses.
Canaries, blinding, and other secrets
-------------------------------------
It should be noted that things like the stack canary discussed earlier
are technically statistical defenses, since they rely on a secret value,
and such values may become discoverable through an information exposure
flaw.
Blinding literal values for things like JITs, where the executable
contents may be partially under the control of userspace, need a similar
secret value.
It is critical that the secret values used must be separate (e.g.
different canary per stack) and high entropy (e.g. is the RNG actually
working?) in order to maximize their success.
Kernel Address Space Layout Randomization (KASLR)
-------------------------------------------------
Since the location of kernel memory is almost always instrumental in
mounting a successful attack, making the location non-deterministic
raises the difficulty of an exploit. (Note that this in turn makes
the value of information exposures higher, since they may be used to
discover desired memory locations.)
Text and module base
~~~~~~~~~~~~~~~~~~~~
By relocating the physical and virtual base address of the kernel at
boot-time (``CONFIG_RANDOMIZE_BASE``), attacks needing kernel code will be
frustrated. Additionally, offsetting the module loading base address
means that even systems that load the same set of modules in the same
order every boot will not share a common base address with the rest of
the kernel text.
Stack base
~~~~~~~~~~
If the base address of the kernel stack is not the same between processes,
or even not the same between syscalls, targets on or beyond the stack
become more difficult to locate.
Dynamic memory base
~~~~~~~~~~~~~~~~~~~
Much of the kernel's dynamic memory (e.g. kmalloc, vmalloc, etc) ends up
being relatively deterministic in layout due to the order of early-boot
initializations. If the base address of these areas is not the same
between boots, targeting them is frustrated, requiring an information
exposure specific to the region.
Structure layout
~~~~~~~~~~~~~~~~
By performing a per-build randomization of the layout of sensitive
structures, attacks must either be tuned to known kernel builds or expose
enough kernel memory to determine structure layouts before manipulating
them.
Preventing Information Exposures
================================
Since the locations of sensitive structures are the primary target for
attacks, it is important to defend against exposure of both kernel memory
addresses and kernel memory contents (since they may contain kernel
addresses or other sensitive things like canary values).
Kernel addresses
----------------
Printing kernel addresses to userspace leaks sensitive information about
the kernel memory layout. Care should be exercised when using any printk
specifier that prints the raw address, currently %px, %p[ad], (and %p[sSb]
in certain circumstances [*]). Any file written to using one of these
specifiers should be readable only by privileged processes.
Kernels 4.14 and older printed the raw address using %p. As of 4.15-rc1
addresses printed with the specifier %p are hashed before printing.
[*] If KALLSYMS is enabled and symbol lookup fails, the raw address is
printed. If KALLSYMS is not enabled the raw address is printed.
Unique identifiers
------------------
Kernel memory addresses must never be used as identifiers exposed to
userspace. Instead, use an atomic counter, an idr, or similar unique
identifier.
Memory initialization
---------------------
Memory copied to userspace must always be fully initialized. If not
explicitly memset(), this will require changes to the compiler to make
sure structure holes are cleared.
Memory poisoning
----------------
When releasing memory, it is best to poison the contents, to avoid reuse
attacks that rely on the old contents of memory. E.g., clear stack on a
syscall return (``CONFIG_GCC_PLUGIN_STACKLEAK``), wipe heap memory on a
free. This frustrates many uninitialized variable attacks, stack content
exposures, heap content exposures, and use-after-free attacks.
Destination tracking
--------------------
To help kill classes of bugs that result in kernel addresses being
written to userspace, the destination of writes needs to be tracked. If
the buffer is destined for userspace (e.g. seq_file backed ``/proc`` files),
it should automatically censor sensitive values.