UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm64/kernel/image.h

113 lines
3.6 KiB
C
Raw Normal View History

arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
/*
* Linker script macros to generate Image header fields.
*
* Copyright (C) 2014 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ASM_IMAGE_H
#define __ASM_IMAGE_H
#ifndef LINKER_SCRIPT
#error This file should only be included in vmlinux.lds.S
#endif
/*
* There aren't any ELF relocations we can use to endian-swap values known only
* at link time (e.g. the subtraction of two symbol addresses), so we must get
* the linker to endian-swap certain values before emitting them.
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields Unfortunately, the current way of using the linker to emit build time constants into the Image header will no longer work once we switch to the use of PIE executables. The reason is that such constants are emitted into the binary using R_AARCH64_ABS64 relocations, which are resolved at runtime, not at build time, and the places targeted by those relocations will contain zeroes before that. So refactor the endian swapping linker script constant generation code so that it emits the upper and lower 32-bit words separately. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-12-26 20:48:02 +08:00
*
* Note that, in order for this to work when building the ELF64 PIE executable
* (for KASLR), these values should not be referenced via R_AARCH64_ABS64
* relocations, since these are fixed up at runtime rather than at build time
* when PIE is in effect. So we need to split them up in 32-bit high and low
* words.
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
*/
#ifdef CONFIG_CPU_BIG_ENDIAN
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields Unfortunately, the current way of using the linker to emit build time constants into the Image header will no longer work once we switch to the use of PIE executables. The reason is that such constants are emitted into the binary using R_AARCH64_ABS64 relocations, which are resolved at runtime, not at build time, and the places targeted by those relocations will contain zeroes before that. So refactor the endian swapping linker script constant generation code so that it emits the upper and lower 32-bit words separately. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-12-26 20:48:02 +08:00
#define DATA_LE32(data) \
((((data) & 0x000000ff) << 24) | \
(((data) & 0x0000ff00) << 8) | \
(((data) & 0x00ff0000) >> 8) | \
(((data) & 0xff000000) >> 24))
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
#else
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields Unfortunately, the current way of using the linker to emit build time constants into the Image header will no longer work once we switch to the use of PIE executables. The reason is that such constants are emitted into the binary using R_AARCH64_ABS64 relocations, which are resolved at runtime, not at build time, and the places targeted by those relocations will contain zeroes before that. So refactor the endian swapping linker script constant generation code so that it emits the upper and lower 32-bit words separately. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-12-26 20:48:02 +08:00
#define DATA_LE32(data) ((data) & 0xffffffff)
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
#endif
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields Unfortunately, the current way of using the linker to emit build time constants into the Image header will no longer work once we switch to the use of PIE executables. The reason is that such constants are emitted into the binary using R_AARCH64_ABS64 relocations, which are resolved at runtime, not at build time, and the places targeted by those relocations will contain zeroes before that. So refactor the endian swapping linker script constant generation code so that it emits the upper and lower 32-bit words separately. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-12-26 20:48:02 +08:00
#define DEFINE_IMAGE_LE64(sym, data) \
sym##_lo32 = DATA_LE32((data) & 0xffffffff); \
sym##_hi32 = DATA_LE32((data) >> 32)
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
#ifdef CONFIG_CPU_BIG_ENDIAN
arm64: allow kernel Image to be loaded anywhere in physical memory This relaxes the kernel Image placement requirements, so that it may be placed at any 2 MB aligned offset in physical memory. This is accomplished by ignoring PHYS_OFFSET when installing memblocks, and accounting for the apparent virtual offset of the kernel Image. As a result, virtual address references below PAGE_OFFSET are correctly mapped onto physical references into the kernel Image regardless of where it sits in memory. Special care needs to be taken for dealing with memory limits passed via mem=, since the generic implementation clips memory top down, which may clip the kernel image itself if it is loaded high up in memory. To deal with this case, we simply add back the memory covering the kernel image, which may result in more memory to be retained than was passed as a mem= parameter. Since mem= should not be considered a production feature, a panic notifier handler is installed that dumps the memory limit at panic time if one was set. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-16 20:52:42 +08:00
#define __HEAD_FLAG_BE 1
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
#else
arm64: allow kernel Image to be loaded anywhere in physical memory This relaxes the kernel Image placement requirements, so that it may be placed at any 2 MB aligned offset in physical memory. This is accomplished by ignoring PHYS_OFFSET when installing memblocks, and accounting for the apparent virtual offset of the kernel Image. As a result, virtual address references below PAGE_OFFSET are correctly mapped onto physical references into the kernel Image regardless of where it sits in memory. Special care needs to be taken for dealing with memory limits passed via mem=, since the generic implementation clips memory top down, which may clip the kernel image itself if it is loaded high up in memory. To deal with this case, we simply add back the memory covering the kernel image, which may result in more memory to be retained than was passed as a mem= parameter. Since mem= should not be considered a production feature, a panic notifier handler is installed that dumps the memory limit at panic time if one was set. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-16 20:52:42 +08:00
#define __HEAD_FLAG_BE 0
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
#endif
arm64: allow kernel Image to be loaded anywhere in physical memory This relaxes the kernel Image placement requirements, so that it may be placed at any 2 MB aligned offset in physical memory. This is accomplished by ignoring PHYS_OFFSET when installing memblocks, and accounting for the apparent virtual offset of the kernel Image. As a result, virtual address references below PAGE_OFFSET are correctly mapped onto physical references into the kernel Image regardless of where it sits in memory. Special care needs to be taken for dealing with memory limits passed via mem=, since the generic implementation clips memory top down, which may clip the kernel image itself if it is loaded high up in memory. To deal with this case, we simply add back the memory covering the kernel image, which may result in more memory to be retained than was passed as a mem= parameter. Since mem= should not be considered a production feature, a panic notifier handler is installed that dumps the memory limit at panic time if one was set. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-16 20:52:42 +08:00
#define __HEAD_FLAG_PAGE_SIZE ((PAGE_SHIFT - 10) / 2)
arm64: Add page size to the kernel image header This patch adds the page size to the arm64 kernel image header so that one can infer the PAGESIZE used by the kernel. This will be helpful to diagnose failures to boot the kernel with page size not supported by the CPU. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-19 21:19:36 +08:00
arm64: allow kernel Image to be loaded anywhere in physical memory This relaxes the kernel Image placement requirements, so that it may be placed at any 2 MB aligned offset in physical memory. This is accomplished by ignoring PHYS_OFFSET when installing memblocks, and accounting for the apparent virtual offset of the kernel Image. As a result, virtual address references below PAGE_OFFSET are correctly mapped onto physical references into the kernel Image regardless of where it sits in memory. Special care needs to be taken for dealing with memory limits passed via mem=, since the generic implementation clips memory top down, which may clip the kernel image itself if it is loaded high up in memory. To deal with this case, we simply add back the memory covering the kernel image, which may result in more memory to be retained than was passed as a mem= parameter. Since mem= should not be considered a production feature, a panic notifier handler is installed that dumps the memory limit at panic time if one was set. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-16 20:52:42 +08:00
#define __HEAD_FLAG_PHYS_BASE 1
arm64: Add page size to the kernel image header This patch adds the page size to the arm64 kernel image header so that one can infer the PAGESIZE used by the kernel. This will be helpful to diagnose failures to boot the kernel with page size not supported by the CPU. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-19 21:19:36 +08:00
arm64: allow kernel Image to be loaded anywhere in physical memory This relaxes the kernel Image placement requirements, so that it may be placed at any 2 MB aligned offset in physical memory. This is accomplished by ignoring PHYS_OFFSET when installing memblocks, and accounting for the apparent virtual offset of the kernel Image. As a result, virtual address references below PAGE_OFFSET are correctly mapped onto physical references into the kernel Image regardless of where it sits in memory. Special care needs to be taken for dealing with memory limits passed via mem=, since the generic implementation clips memory top down, which may clip the kernel image itself if it is loaded high up in memory. To deal with this case, we simply add back the memory covering the kernel image, which may result in more memory to be retained than was passed as a mem= parameter. Since mem= should not be considered a production feature, a panic notifier handler is installed that dumps the memory limit at panic time if one was set. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-16 20:52:42 +08:00
#define __HEAD_FLAGS ((__HEAD_FLAG_BE << 0) | \
(__HEAD_FLAG_PAGE_SIZE << 1) | \
(__HEAD_FLAG_PHYS_BASE << 3))
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
/*
* These will output as part of the Image header, which should be little-endian
* regardless of the endianness of the kernel. While constant values could be
* endian swapped in head.S, all are done here for consistency.
*/
#define HEAD_SYMBOLS \
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields Unfortunately, the current way of using the linker to emit build time constants into the Image header will no longer work once we switch to the use of PIE executables. The reason is that such constants are emitted into the binary using R_AARCH64_ABS64 relocations, which are resolved at runtime, not at build time, and the places targeted by those relocations will contain zeroes before that. So refactor the endian swapping linker script constant generation code so that it emits the upper and lower 32-bit words separately. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-12-26 20:48:02 +08:00
DEFINE_IMAGE_LE64(_kernel_size_le, _end - _text); \
DEFINE_IMAGE_LE64(_kernel_offset_le, TEXT_OFFSET); \
DEFINE_IMAGE_LE64(_kernel_flags_le, __HEAD_FLAGS);
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
arm64/efi: isolate EFI stub from the kernel proper Since arm64 does not use a builtin decompressor, the EFI stub is built into the kernel proper. So far, this has been working fine, but actually, since the stub is in fact a PE/COFF relocatable binary that is executed at an unknown offset in the 1:1 mapping provided by the UEFI firmware, we should not be seamlessly sharing code with the kernel proper, which is a position dependent executable linked at a high virtual offset. So instead, separate the contents of libstub and its dependencies, by putting them into their own namespace by prefixing all of its symbols with __efistub. This way, we have tight control over what parts of the kernel proper are referenced by the stub. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-09 03:02:04 +08:00
#ifdef CONFIG_EFI
arm64: move early boot code to the .init segment Apart from the arm64/linux and EFI header data structures, there is nothing in the .head.text section that must reside at the beginning of the Image. So let's move it to the .init section where it belongs. Note that this involves some minor tweaking of the EFI header, primarily because the address of 'stext' no longer coincides with the start of the .text section. It also requires a couple of relocated symbol references to be slightly rewritten or their definition moved to the linker script. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-30 23:43:07 +08:00
__efistub_stext_offset = stext - _text;
arm64/efi: isolate EFI stub from the kernel proper Since arm64 does not use a builtin decompressor, the EFI stub is built into the kernel proper. So far, this has been working fine, but actually, since the stub is in fact a PE/COFF relocatable binary that is executed at an unknown offset in the 1:1 mapping provided by the UEFI firmware, we should not be seamlessly sharing code with the kernel proper, which is a position dependent executable linked at a high virtual offset. So instead, separate the contents of libstub and its dependencies, by putting them into their own namespace by prefixing all of its symbols with __efistub. This way, we have tight control over what parts of the kernel proper are referenced by the stub. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-09 03:02:04 +08:00
/*
* The EFI stub has its own symbol namespace prefixed by __efistub_, to
* isolate it from the kernel proper. The following symbols are legally
* accessed by the stub, so provide some aliases to make them accessible.
* Only include data symbols here, or text symbols of functions that are
* guaranteed to be safe when executed at another offset than they were
* linked at. The routines below are all implemented in assembler in a
* position independent manner
*/
arm64: drop linker script hack to hide __efistub_ symbols Commit 1212f7a16af4 ("scripts/kallsyms: filter arm64's __efistub_ symbols") updated the kallsyms code to filter out symbols with the __efistub_ prefix explicitly, so we no longer require the hack in our linker script to emit them as absolute symbols. Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-11-30 19:35:58 +08:00
__efistub_memcmp = __pi_memcmp;
__efistub_memchr = __pi_memchr;
__efistub_memcpy = __pi_memcpy;
__efistub_memmove = __pi_memmove;
__efistub_memset = __pi_memset;
__efistub_strlen = __pi_strlen;
__efistub_strnlen = __pi_strnlen;
__efistub_strcmp = __pi_strcmp;
__efistub_strncmp = __pi_strncmp;
__efistub_strrchr = __pi_strrchr;
__efistub___flush_dcache_area = __pi___flush_dcache_area;
arm64/efi: isolate EFI stub from the kernel proper Since arm64 does not use a builtin decompressor, the EFI stub is built into the kernel proper. So far, this has been working fine, but actually, since the stub is in fact a PE/COFF relocatable binary that is executed at an unknown offset in the 1:1 mapping provided by the UEFI firmware, we should not be seamlessly sharing code with the kernel proper, which is a position dependent executable linked at a high virtual offset. So instead, separate the contents of libstub and its dependencies, by putting them into their own namespace by prefixing all of its symbols with __efistub. This way, we have tight control over what parts of the kernel proper are referenced by the stub. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-09 03:02:04 +08:00
arm64: add KASAN support This patch adds arch specific code for kernel address sanitizer (see Documentation/kasan.txt). 1/8 of kernel addresses reserved for shadow memory. There was no big enough hole for this, so virtual addresses for shadow were stolen from vmalloc area. At early boot stage the whole shadow region populated with just one physical page (kasan_zero_page). Later, this page reused as readonly zero shadow for some memory that KASan currently don't track (vmalloc). After mapping the physical memory, pages for shadow memory are allocated and mapped. Functions like memset/memmove/memcpy do a lot of memory accesses. If bad pointer passed to one of these function it is important to catch this. Compiler's instrumentation cannot do this since these functions are written in assembly. KASan replaces memory functions with manually instrumented variants. Original functions declared as weak symbols so strong definitions in mm/kasan/kasan.c could replace them. Original functions have aliases with '__' prefix in name, so we could call non-instrumented variant if needed. Some files built without kasan instrumentation (e.g. mm/slub.c). Original mem* function replaced (via #define) with prefixed variants to disable memory access checks for such files. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-12 23:52:58 +08:00
#ifdef CONFIG_KASAN
arm64: drop linker script hack to hide __efistub_ symbols Commit 1212f7a16af4 ("scripts/kallsyms: filter arm64's __efistub_ symbols") updated the kallsyms code to filter out symbols with the __efistub_ prefix explicitly, so we no longer require the hack in our linker script to emit them as absolute symbols. Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-11-30 19:35:58 +08:00
__efistub___memcpy = __pi_memcpy;
__efistub___memmove = __pi_memmove;
__efistub___memset = __pi_memset;
arm64: add KASAN support This patch adds arch specific code for kernel address sanitizer (see Documentation/kasan.txt). 1/8 of kernel addresses reserved for shadow memory. There was no big enough hole for this, so virtual addresses for shadow were stolen from vmalloc area. At early boot stage the whole shadow region populated with just one physical page (kasan_zero_page). Later, this page reused as readonly zero shadow for some memory that KASan currently don't track (vmalloc). After mapping the physical memory, pages for shadow memory are allocated and mapped. Functions like memset/memmove/memcpy do a lot of memory accesses. If bad pointer passed to one of these function it is important to catch this. Compiler's instrumentation cannot do this since these functions are written in assembly. KASan replaces memory functions with manually instrumented variants. Original functions declared as weak symbols so strong definitions in mm/kasan/kasan.c could replace them. Original functions have aliases with '__' prefix in name, so we could call non-instrumented variant if needed. Some files built without kasan instrumentation (e.g. mm/slub.c). Original mem* function replaced (via #define) with prefixed variants to disable memory access checks for such files. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-12 23:52:58 +08:00
#endif
arm64: drop linker script hack to hide __efistub_ symbols Commit 1212f7a16af4 ("scripts/kallsyms: filter arm64's __efistub_ symbols") updated the kallsyms code to filter out symbols with the __efistub_ prefix explicitly, so we no longer require the hack in our linker script to emit them as absolute symbols. Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-11-30 19:35:58 +08:00
__efistub__text = _text;
__efistub__end = _end;
__efistub__edata = _edata;
__efistub_screen_info = screen_info;
arm64/efi: isolate EFI stub from the kernel proper Since arm64 does not use a builtin decompressor, the EFI stub is built into the kernel proper. So far, this has been working fine, but actually, since the stub is in fact a PE/COFF relocatable binary that is executed at an unknown offset in the 1:1 mapping provided by the UEFI firmware, we should not be seamlessly sharing code with the kernel proper, which is a position dependent executable linked at a high virtual offset. So instead, separate the contents of libstub and its dependencies, by putting them into their own namespace by prefixing all of its symbols with __efistub. This way, we have tight control over what parts of the kernel proper are referenced by the stub. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-09 03:02:04 +08:00
#endif
arm64: Update the Image header Currently the kernel Image is stripped of everything past the initial stack, and at runtime the memory is initialised and used by the kernel. This makes the effective minimum memory footprint of the kernel larger than the size of the loaded binary, though bootloaders have no mechanism to identify how large this minimum memory footprint is. This makes it difficult to choose safe locations to place both the kernel and other binaries required at boot (DTB, initrd, etc), such that the kernel won't clobber said binaries or other reserved memory during initialisation. Additionally when big endian support was added the image load offset was overlooked, and is currently of an arbitrary endianness, which makes it difficult for bootloaders to make use of it. It seems that bootloaders aren't respecting the image load offset at present anyway, and are assuming that offset 0x80000 will always be correct. This patch adds an effective image size to the kernel header which describes the amount of memory from the start of the kernel Image binary which the kernel expects to use before detecting memory and handling any memory reservations. This can be used by bootloaders to choose suitable locations to load the kernel and/or other binaries such that the kernel will not clobber any memory unexpectedly. As before, memory reservations are required to prevent the kernel from clobbering these locations later. Both the image load offset and the effective image size are forced to be little-endian regardless of the native endianness of the kernel to enable bootloaders to load a kernel of arbitrary endianness. Bootloaders which wish to make use of the load offset can inspect the effective image size field for a non-zero value to determine if the offset is of a known endianness. To enable software to determine the endinanness of the kernel as may be required for certain use-cases, a new flags field (also little-endian) is added to the kernel header to export this information. The documentation is updated to clarify these details. To discourage future assumptions regarding the value of text_offset, the value at this point in time is removed from the main flow of the documentation (though kept as a compatibility note). Some minor formatting issues in the documentation are also corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Tom Rini <trini@ti.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Kevin Hilman <kevin.hilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-24 23:51:36 +08:00
#endif /* __ASM_IMAGE_H */