UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/rdma/ib_pack.h

290 lines
7.9 KiB
C
Raw Normal View History

RDMA/include: Replace license text with SPDX tags The header files in RDMA subsystem are dual licensed and can be described by simple SPDX tag, so replace all of them at once together with making them use the same coding style for header guard defines. Link: https://lore.kernel.org/r/20200719072521.135260-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-19 15:25:21 +08:00
/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Copyright (c) 2004 Topspin Corporation. All rights reserved.
*/
#ifndef IB_PACK_H
#define IB_PACK_H
[PATCH] IB: move include files to include/rdma Move the InfiniBand headers from drivers/infiniband/include to include/rdma. This allows InfiniBand-using code to live elsewhere, and lets us remove the ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 04:40:04 +08:00
#include <rdma/ib_verbs.h>
IB/core: Ethernet L2 attributes in verbs/cm structures This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-13 00:03:11 +08:00
#include <uapi/linux/if_ether.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
enum {
IB/core: Fix calculation of maximum RoCE MTU The original code only took into consideration the largest header possible after the IB_BTH_BYTES. This was incorrect, as the largest possible header size is the largest possible combination of headers we might run into. The new code accounts for all possible headers in the largest possible combination and subtracts that from the MTU to make sure that all packets will fit on the wire. Link: https://www.spinics.net/lists/linux-rdma/msg54558.html Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-16 13:45:16 +08:00
IB_LRH_BYTES = 8,
IB_ETH_BYTES = 14,
IB_VLAN_BYTES = 4,
IB_GRH_BYTES = 40,
IB_IP4_BYTES = 20,
IB_UDP_BYTES = 8,
IB_BTH_BYTES = 12,
IB_DETH_BYTES = 8,
IB_EXT_ATOMICETH_BYTES = 28,
IB_EXT_XRC_BYTES = 4,
IB_ICRC_BYTES = 4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
struct ib_field {
size_t struct_offset_bytes;
size_t struct_size_bytes;
int offset_words;
int offset_bits;
int size_bits;
char *field_name;
};
#define RESERVED \
.field_name = "reserved"
/*
* This macro cleans up the definitions of constants for BTH opcodes.
* It is used to define constants such as IB_OPCODE_UD_SEND_ONLY,
* which becomes IB_OPCODE_UD + IB_OPCODE_SEND_ONLY, and this gives
* the correct value.
*
* In short, user code should use the constants defined using the
* macro rather than worrying about adding together other constants.
*/
#define IB_OPCODE(transport, op) \
IB_OPCODE_ ## transport ## _ ## op = \
IB_OPCODE_ ## transport + IB_OPCODE_ ## op
enum {
/* transport types -- just used to define real constants */
IB_OPCODE_RC = 0x00,
IB_OPCODE_UC = 0x20,
IB_OPCODE_RD = 0x40,
IB_OPCODE_UD = 0x60,
ib_pack.h: Fix commentary IBA reference for CNP in IB opcode enum IBA spec is now 1.3 not 3.1 and vol 1 should be mentioned as there is also vol 2. Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-01 03:04:29 +08:00
/* per IBTA 1.3 vol 1 Table 38, A10.3.2 */
IB/core: Add core header changes needed for OPA This patch adds the value of the CNP opcode to the existing list of enumerated opcodes in ib_pack.h Add common OPA header definitions for driver build: - opa_port_info.h - opa_smi.h - hfi1_user.h Additionally, ib_mad.h, has additional definitions that are common to ib_drivers including: - trap support - cca support The qib driver has the duplication removed in favor those in ib_mad.h Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: John, Jubin <jubin.john@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 03:17:32 +08:00
IB_OPCODE_CNP = 0x80,
IB/hfi1: Add transmit fault injection feature Add ability to fault packets on transmit by opcode. Dropping by packet can be achieved by setting the mask to 0. In order to drop non-verbs traffic we set PbcInsertHrc to NONE (0x2). The packet will still be delivered to the receiving node but a KHdrHCRCErr (KDETH packet with a bad HCRC) will be triggered and the packet will not be delivered to the correct context. In order to drop regular verbs traffic we set the PbcTestEbp flag. The packet will still be delivered to the receiving node but a 'late ebp error' will be triggered and will be dropped. A global toggle (/sys/kernel/debug/hfi1/hfi1_X/fault_suppress_err) has been added to suppress the error messages on the receive node when a packet was faulted on the sending node. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-21 08:26:20 +08:00
/* Manufacturer specific */
IB_OPCODE_MSP = 0xe0,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* operations -- just used to define real constants */
IB_OPCODE_SEND_FIRST = 0x00,
IB_OPCODE_SEND_MIDDLE = 0x01,
IB_OPCODE_SEND_LAST = 0x02,
IB_OPCODE_SEND_LAST_WITH_IMMEDIATE = 0x03,
IB_OPCODE_SEND_ONLY = 0x04,
IB_OPCODE_SEND_ONLY_WITH_IMMEDIATE = 0x05,
IB_OPCODE_RDMA_WRITE_FIRST = 0x06,
IB_OPCODE_RDMA_WRITE_MIDDLE = 0x07,
IB_OPCODE_RDMA_WRITE_LAST = 0x08,
IB_OPCODE_RDMA_WRITE_LAST_WITH_IMMEDIATE = 0x09,
IB_OPCODE_RDMA_WRITE_ONLY = 0x0a,
IB_OPCODE_RDMA_WRITE_ONLY_WITH_IMMEDIATE = 0x0b,
IB_OPCODE_RDMA_READ_REQUEST = 0x0c,
IB_OPCODE_RDMA_READ_RESPONSE_FIRST = 0x0d,
IB_OPCODE_RDMA_READ_RESPONSE_MIDDLE = 0x0e,
IB_OPCODE_RDMA_READ_RESPONSE_LAST = 0x0f,
IB_OPCODE_RDMA_READ_RESPONSE_ONLY = 0x10,
IB_OPCODE_ACKNOWLEDGE = 0x11,
IB_OPCODE_ATOMIC_ACKNOWLEDGE = 0x12,
IB_OPCODE_COMPARE_SWAP = 0x13,
IB_OPCODE_FETCH_ADD = 0x14,
ib_pack.h: Add opcode definition for send with invalidate The opcode for "SEND Last with Invalidate" and "SEND Only with Invalidate" have been defined for RC in IBA Specification Vol 1 since Release 1.2. Add the definition to the header file in preparation of supporting these opcodes in rdmavt based drivers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-13 01:23:53 +08:00
/* opcode 0x15 is reserved */
IB_OPCODE_SEND_LAST_WITH_INVALIDATE = 0x16,
IB_OPCODE_SEND_ONLY_WITH_INVALIDATE = 0x17,
RDMA: Extend RDMA kernel verbs ABI to support flush This commit extends the RDMA kernel verbs ABI to support the flush operation defined in IBA A19.4.1. These changes are backward compatible with the existing RDMA kernel verbs ABI. It makes device/HCA support new FLUSH attributes/capabilities, and it also makes memory region support new FLUSH access flags. Users can use ibv_reg_mr(3) to register flush access flags. Only the access flags also supported by device's capabilities can be registered successfully. Once registered successfully, it means the MR is flushable. Similarly, A flushable MR should also have one or both of GLOBAL_VISIBILITY and PERSISTENT attributes/capabilities like device/HCA. Link: https://lore.kernel.org/r/20221206130201.30986-3-lizhijian@fujitsu.com Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-12-06 21:01:53 +08:00
IB_OPCODE_FLUSH = 0x1C,
RDMA: Extend RDMA kernel ABI to support atomic write 1) Define new atomic write request/completion in kernel. 2) Define new atomic write capability in kernel. 3) Define new atomic write opcode for RC service in packet. Link: https://lore.kernel.org/r/1669905432-14-3-git-send-email-yangx.jy@fujitsu.com Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-12-01 22:37:06 +08:00
IB_OPCODE_ATOMIC_WRITE = 0x1D,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* real constants follow -- see comment about above IB_OPCODE()
macro for more details */
/* RC */
IB_OPCODE(RC, SEND_FIRST),
IB_OPCODE(RC, SEND_MIDDLE),
IB_OPCODE(RC, SEND_LAST),
IB_OPCODE(RC, SEND_LAST_WITH_IMMEDIATE),
IB_OPCODE(RC, SEND_ONLY),
IB_OPCODE(RC, SEND_ONLY_WITH_IMMEDIATE),
IB_OPCODE(RC, RDMA_WRITE_FIRST),
IB_OPCODE(RC, RDMA_WRITE_MIDDLE),
IB_OPCODE(RC, RDMA_WRITE_LAST),
IB_OPCODE(RC, RDMA_WRITE_LAST_WITH_IMMEDIATE),
IB_OPCODE(RC, RDMA_WRITE_ONLY),
IB_OPCODE(RC, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
IB_OPCODE(RC, RDMA_READ_REQUEST),
IB_OPCODE(RC, RDMA_READ_RESPONSE_FIRST),
IB_OPCODE(RC, RDMA_READ_RESPONSE_MIDDLE),
IB_OPCODE(RC, RDMA_READ_RESPONSE_LAST),
IB_OPCODE(RC, RDMA_READ_RESPONSE_ONLY),
IB_OPCODE(RC, ACKNOWLEDGE),
IB_OPCODE(RC, ATOMIC_ACKNOWLEDGE),
IB_OPCODE(RC, COMPARE_SWAP),
IB_OPCODE(RC, FETCH_ADD),
ib_pack.h: Add opcode definition for send with invalidate The opcode for "SEND Last with Invalidate" and "SEND Only with Invalidate" have been defined for RC in IBA Specification Vol 1 since Release 1.2. Add the definition to the header file in preparation of supporting these opcodes in rdmavt based drivers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-13 01:23:53 +08:00
IB_OPCODE(RC, SEND_LAST_WITH_INVALIDATE),
IB_OPCODE(RC, SEND_ONLY_WITH_INVALIDATE),
RDMA: Extend RDMA kernel verbs ABI to support flush This commit extends the RDMA kernel verbs ABI to support the flush operation defined in IBA A19.4.1. These changes are backward compatible with the existing RDMA kernel verbs ABI. It makes device/HCA support new FLUSH attributes/capabilities, and it also makes memory region support new FLUSH access flags. Users can use ibv_reg_mr(3) to register flush access flags. Only the access flags also supported by device's capabilities can be registered successfully. Once registered successfully, it means the MR is flushable. Similarly, A flushable MR should also have one or both of GLOBAL_VISIBILITY and PERSISTENT attributes/capabilities like device/HCA. Link: https://lore.kernel.org/r/20221206130201.30986-3-lizhijian@fujitsu.com Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-12-06 21:01:53 +08:00
IB_OPCODE(RC, FLUSH),
RDMA: Extend RDMA kernel ABI to support atomic write 1) Define new atomic write request/completion in kernel. 2) Define new atomic write capability in kernel. 3) Define new atomic write opcode for RC service in packet. Link: https://lore.kernel.org/r/1669905432-14-3-git-send-email-yangx.jy@fujitsu.com Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-12-01 22:37:06 +08:00
IB_OPCODE(RC, ATOMIC_WRITE),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* UC */
IB_OPCODE(UC, SEND_FIRST),
IB_OPCODE(UC, SEND_MIDDLE),
IB_OPCODE(UC, SEND_LAST),
IB_OPCODE(UC, SEND_LAST_WITH_IMMEDIATE),
IB_OPCODE(UC, SEND_ONLY),
IB_OPCODE(UC, SEND_ONLY_WITH_IMMEDIATE),
IB_OPCODE(UC, RDMA_WRITE_FIRST),
IB_OPCODE(UC, RDMA_WRITE_MIDDLE),
IB_OPCODE(UC, RDMA_WRITE_LAST),
IB_OPCODE(UC, RDMA_WRITE_LAST_WITH_IMMEDIATE),
IB_OPCODE(UC, RDMA_WRITE_ONLY),
IB_OPCODE(UC, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
/* RD */
IB_OPCODE(RD, SEND_FIRST),
IB_OPCODE(RD, SEND_MIDDLE),
IB_OPCODE(RD, SEND_LAST),
IB_OPCODE(RD, SEND_LAST_WITH_IMMEDIATE),
IB_OPCODE(RD, SEND_ONLY),
IB_OPCODE(RD, SEND_ONLY_WITH_IMMEDIATE),
IB_OPCODE(RD, RDMA_WRITE_FIRST),
IB_OPCODE(RD, RDMA_WRITE_MIDDLE),
IB_OPCODE(RD, RDMA_WRITE_LAST),
IB_OPCODE(RD, RDMA_WRITE_LAST_WITH_IMMEDIATE),
IB_OPCODE(RD, RDMA_WRITE_ONLY),
IB_OPCODE(RD, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
IB_OPCODE(RD, RDMA_READ_REQUEST),
IB_OPCODE(RD, RDMA_READ_RESPONSE_FIRST),
IB_OPCODE(RD, RDMA_READ_RESPONSE_MIDDLE),
IB_OPCODE(RD, RDMA_READ_RESPONSE_LAST),
IB_OPCODE(RD, RDMA_READ_RESPONSE_ONLY),
IB_OPCODE(RD, ACKNOWLEDGE),
IB_OPCODE(RD, ATOMIC_ACKNOWLEDGE),
IB_OPCODE(RD, COMPARE_SWAP),
IB_OPCODE(RD, FETCH_ADD),
RDMA: Extend RDMA kernel verbs ABI to support flush This commit extends the RDMA kernel verbs ABI to support the flush operation defined in IBA A19.4.1. These changes are backward compatible with the existing RDMA kernel verbs ABI. It makes device/HCA support new FLUSH attributes/capabilities, and it also makes memory region support new FLUSH access flags. Users can use ibv_reg_mr(3) to register flush access flags. Only the access flags also supported by device's capabilities can be registered successfully. Once registered successfully, it means the MR is flushable. Similarly, A flushable MR should also have one or both of GLOBAL_VISIBILITY and PERSISTENT attributes/capabilities like device/HCA. Link: https://lore.kernel.org/r/20221206130201.30986-3-lizhijian@fujitsu.com Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-12-06 21:01:53 +08:00
IB_OPCODE(RD, FLUSH),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* UD */
IB_OPCODE(UD, SEND_ONLY),
IB_OPCODE(UD, SEND_ONLY_WITH_IMMEDIATE)
};
enum {
IB_LNH_RAW = 0,
IB_LNH_IP = 1,
IB_LNH_IBA_LOCAL = 2,
IB_LNH_IBA_GLOBAL = 3
};
struct ib_unpacked_lrh {
u8 virtual_lane;
u8 link_version;
u8 service_level;
u8 link_next_header;
__be16 destination_lid;
__be16 packet_length;
__be16 source_lid;
};
struct ib_unpacked_grh {
u8 ip_version;
u8 traffic_class;
__be32 flow_label;
__be16 payload_length;
u8 next_header;
u8 hop_limit;
union ib_gid source_gid;
union ib_gid destination_gid;
};
struct ib_unpacked_bth {
u8 opcode;
u8 solicited_event;
u8 mig_req;
u8 pad_count;
u8 transport_header_version;
__be16 pkey;
__be32 destination_qpn;
u8 ack_req;
__be32 psn;
};
struct ib_unpacked_deth {
__be32 qkey;
__be32 source_qpn;
};
IB/pack: IBoE UD packet packing support Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:17:56 +08:00
struct ib_unpacked_eth {
u8 dmac_h[4];
u8 dmac_l[2];
u8 smac_h[2];
u8 smac_l[4];
__be16 type;
};
IB/core: Initialize UD header structure with IP and UDP headers ib_ud_header_init() is used to format InfiniBand headers in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is required that this function would be able to build also IP and UDP headers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:56 +08:00
struct ib_unpacked_ip4 {
u8 ver;
u8 hdr_len;
u8 tos;
__be16 tot_len;
__be16 id;
__be16 frag_off;
u8 ttl;
u8 protocol;
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers RoCEv2 packets are sent over IP/UDP protocols. The mlx4 driver uses a type of RAW QP to send packets for QP1 and therefore needs to build the network headers below BTH in software. This patch adds option to build QP1 packets with IP and UDP headers if RoCEv2 is requested. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-14 23:50:41 +08:00
__sum16 check;
IB/core: Initialize UD header structure with IP and UDP headers ib_ud_header_init() is used to format InfiniBand headers in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is required that this function would be able to build also IP and UDP headers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:56 +08:00
__be32 saddr;
__be32 daddr;
};
struct ib_unpacked_udp {
__be16 sport;
__be16 dport;
__be16 length;
__be16 csum;
};
IB/core: Add VLAN support for IBoE Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the GID derived from a link local address in the following way: GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN. The 3 bits user priority field of the packets are identical to the 3 bits of the SL. In case of rdma_cm apps, the TOS field is used to generate the SL field by doing a shift right of 5 bits effectively taking to 3 MS bits of the TOS field. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:18:59 +08:00
struct ib_unpacked_vlan {
__be16 tag;
__be16 type;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ib_ud_header {
IB/pack: IBoE UD packet packing support Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:17:56 +08:00
int lrh_present;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ib_unpacked_lrh lrh;
IB/pack: IBoE UD packet packing support Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:17:56 +08:00
int eth_present;
struct ib_unpacked_eth eth;
IB/core: Add VLAN support for IBoE Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the GID derived from a link local address in the following way: GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN. The 3 bits user priority field of the packets are identical to the 3 bits of the SL. In case of rdma_cm apps, the TOS field is used to generate the SL field by doing a shift right of 5 bits effectively taking to 3 MS bits of the TOS field. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:18:59 +08:00
int vlan_present;
struct ib_unpacked_vlan vlan;
IB/pack: IBoE UD packet packing support Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:17:56 +08:00
int grh_present;
struct ib_unpacked_grh grh;
IB/core: Initialize UD header structure with IP and UDP headers ib_ud_header_init() is used to format InfiniBand headers in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is required that this function would be able to build also IP and UDP headers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:56 +08:00
int ipv4_present;
struct ib_unpacked_ip4 ip4;
int udp_present;
struct ib_unpacked_udp udp;
IB/pack: IBoE UD packet packing support Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:17:56 +08:00
struct ib_unpacked_bth bth;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ib_unpacked_deth deth;
IB/pack: IBoE UD packet packing support Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 22:17:56 +08:00
int immediate_present;
__be32 immediate_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
void ib_pack(const struct ib_field *desc,
int desc_len,
void *structure,
void *buf);
void ib_unpack(const struct ib_field *desc,
int desc_len,
void *buf,
void *structure);
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers RoCEv2 packets are sent over IP/UDP protocols. The mlx4 driver uses a type of RAW QP to send packets for QP1 and therefore needs to build the network headers below BTH in software. This patch adds option to build QP1 packets with IP and UDP headers if RoCEv2 is requested. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-14 23:50:41 +08:00
__sum16 ib_ud_ip4_csum(struct ib_ud_header *header);
IB/core: Initialize UD header structure with IP and UDP headers ib_ud_header_init() is used to format InfiniBand headers in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is required that this function would be able to build also IP and UDP headers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:56 +08:00
int ib_ud_header_init(int payload_bytes,
int lrh_present,
int eth_present,
int vlan_present,
int grh_present,
int ip_version,
int udp_present,
int immediate_present,
struct ib_ud_header *header);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int ib_ud_header_pack(struct ib_ud_header *header,
void *buf);
int ib_ud_header_unpack(void *buf,
struct ib_ud_header *header);
#endif /* IB_PACK_H */