UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/gpu/drm/Makefile

106 lines
3.8 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
drm: Add Allwinner A10 Display Engine support The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-29 16:36:23 +08:00
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
drm/radeon: move drm_buffer to drm/radeon/ Radeon UMS is the last user of drm_buffer. Move it out of sight so radeon can drop it together with UMS. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-29 18:12:27 +08:00
drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm: replace drawable ioctl by noops The information supplied by userspace through these ioctls is only accessible by dev->drw_idr. But there's no in-tree user of that. Also userspace does not really care about return values of these ioctls, either. Only hw/xfree86/dri/dri.c from the xserver actually checks the return from adddraw and keeps on trying to create a kernel drawable every time somebody creates a dri drawable. But since that's now a noop, who cares. Therefore it's safe to replace these three ioctls with noops and rip out the implementation. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-24 04:53:31 +08:00
drm_context.o drm_dma.o \
drm: rename drm_fops.c to drm_file.c It's not just file ops, but drm_file stuff in general. This is prep work to extracting a drm_file.h header in the next patch. Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-8-daniel.vetter@ffwll.ch
2017-03-08 22:12:40 +08:00
drm_file.o drm_gem.o drm_ioctl.o drm_irq.o \
drm: compile drm_vm.c only when needed drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU. Use a new DRM_VM to define when drm_vm.c in needed. stub drm_legacy_vma_flush() to avoid compilation issues version 4: - a "config DRM_VM" in Kconfig Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Fix conflict.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-01-04 17:12:56 +08:00
drm_lock.o drm_memory.o drm_drv.o \
drm: Remove __OS_HAS_AGP We already express the drm/agp depencies correctly in Kconfig, so we can rip this remnant from the shared drm core days. Aside: Pretty much all the #ifdefs in radeon/nouveau could be killed if ttm would provide dummy functions. I'm not going to volunteer for that though. v2: Use IS_ENABLED(CONFIG_AGP) as suggested by Ville v3: Polish from Ville's review. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v2) Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-09 22:45:52 +08:00
drm_scatter.o drm_pci.o \
drm: Remove unused drm_platform midlayer Now that the last driver has been converted, the drm_platform midlayer is unused. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch Reviewed-by: Sean Paul <seanpaul@chromium.org>
2016-12-14 03:24:34 +08:00
drm_sysfs.o drm_hashtab.o drm_mm.o \
drm: Move format-related helpers to drm_fourcc.c The drm_crtc.c file is a mess, making the ABI documentation confusing since all functions are in the same bag. Split the format-related helpers to a new drm_fourcc.c file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465466048-2020-1-git-send-email-laurent.pinchart@ideasonboard.com
2016-06-09 17:54:08 +08:00
drm_crtc.o drm_fourcc.o drm_modes.o drm_edid.o \
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 23:21:06 +08:00
drm_info.o drm_encoder_slave.o \
drm: Add struct drm_rect and assorted utility functions struct drm_rect represents a simple rectangle. The utility functions are there to help driver writers. v2: Moved the region stuff into its own file, made the smaller funcs static inline, used 64bit maths in the scaled clipping function to avoid overflows (instead it will saturate to INT_MIN or INT_MAX). v3: Renamed drm_region to drm_rect, drm_region_clip to drm_rect_intersect, and drm_region_subsample to drm_rect_downscale. v4: Renamed some function parameters, improve kernel-doc comments a bit, and actually generate documentation for drm_rect.[ch]. v5: s/RETUTRNS/RETURNS/ Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-24 23:52:34 +08:00
drm_trace_points.o drm_global.o drm_prime.o \
drm: convert crtc and connection_mutex to ww_mutex (v5) For atomic, it will be quite necessary to not need to care so much about locking order. And 'state' gives us a convenient place to stash a ww_ctx for any sort of update that needs to grab multiple crtc locks. Because we will want to eventually make locking even more fine grained (giving locks to planes, connectors, etc), split out drm_modeset_lock and drm_modeset_acquire_ctx to track acquired locks. Atomic will use this to keep track of which locks have been acquired in a transaction. v1: original v2: remove a few things not needed until atomic, for now v3: update for v3 of connection_mutex patch.. v4: squash in docbook v5: doc tweaks/fixes Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-20 01:10:12 +08:00
drm_rect.o drm_vma_manager.o drm_flip_work.o \
drm: Extract drm_framebuffer.[hc] Also start with drm_modeset.h with the core bits, since we need to untangle this mess somehow. That allows us to move the drm_modes.h include to the right spot, except for the temporary connector status enum. That will get fixed as soon as drm_connector.h exists. v2: Rebase. v3: Move drm_crtc_force_disable_all back again, that wasn't meant to be moved (Sean). v4: Rebase. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-15 22:07:02 +08:00
drm_modeset_lock.o drm_atomic.o drm_bridge.o \
drm: Extract drm_encoder.[hc] Same treatment as before. Only hiccup is drm_crtc_mask, which unfortunately can't be resolved until drm_crtc.h is less of a monster. Untangle the header loop with a forward declaration for that static inline. Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-1-daniel.vetter@ffwll.ch
2016-08-29 16:27:49 +08:00
drm_framebuffer.o drm_connector.o drm_blend.o \
drm: Extract drm_plane.[hc] Just pure code movement, cleanup and polish will happen in later patches. v2: Don't forget all the ioctl! To extract those cleanly I decided to put check_src_coords into drm_framebuffer.c (and give it a drm_framebuffer_ prefix), since that just checks framebuffer constraints. v3: rebase over PAGE_FLIP_TARGET. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> [seanpaul] This patch as posted on the list was rebased on: commit 6f00975c619064a18c23fd3aced325ae165a73b9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Aug 20 12:22:11 2016 +0200 drm: Reject page_flip for !DRIVER_MODESET so as a result of moving the page_flip ioctl, this fix has been rolled into this patch. Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-09-21 16:59:24 +08:00
drm_encoder.o drm_mode_object.o drm_property.o \
drm: Extract drm_dumb_buffers.c Just code movement, doc cleanup will follow up later. v2: Keep all the copyright notices. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-2-daniel.vetter@ffwll.ch
2016-11-14 19:58:16 +08:00
drm_plane.o drm_color_mgmt.o drm_print.o \
drm: introduce sync objects (v4) Sync objects are new toplevel drm object, that contain a pointer to a fence. This fence can be updated via command submission ioctls via drivers. There is also a generic wait obj API modelled on the vulkan wait API (with code modelled on some amdgpu code). These objects can be converted to an opaque fd that can be passes between processes. v2: rename reference/unreference to put/get (Chris) fix leaked reference (David Zhou) drop mutex in favour of cmpxchg (Chris) v3: cleanups from danvet, rebase on drm_fops rename check fd_flags is 0 in ioctls. v4: export find/free, change replace fence to take a syncobj. In order to support lookup first, replace later semantics which seem in the end to be cleaner. Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-04-04 11:26:24 +08:00
drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \
drm: Add drm_object lease infrastructure [v5] This provides new data structures to hold "lease" information about drm mode setting objects, and provides for creating new drm_masters which have access to a subset of the available drm resources. An 'owner' is a drm_master which is not leasing the objects from another drm_master, and hence 'owns' them. A 'lessee' is a drm_master which is leasing objects from some other drm_master. Each lessee holds the set of objects which it is leasing from the lessor. A 'lessor' is a drm_master which is leasing objects to another drm_master. This is the same as the owner in the current code. The set of objects any drm_master 'controls' is limited to the set of objects it leases (for lessees) or all objects (for owners). Objects not controlled by a drm_master cannot be modified through the various state manipulating ioctls, and any state reported back to user space will be edited to make them appear idle and/or unusable. For instance, connectors always report 'disconnected', while encoders report no possible crtcs or clones. The full list of lessees leasing objects from an owner (either directly, or indirectly through another lessee), can be searched from an idr in the drm_master of the owner. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * Sub-leasing has been disabled. * BUG_ON for lock checking replaced with lockdep_assert_held * 'change' ioctl has been removed. * Leased objects can always be controlled by the lessor; the 'mask_lease' flag has been removed * Checking for leased status has been simplified, replacing the drm_lease_check function with drm_lease_held. Changes in v3, some suggested by Dave Airlie <airlied@gmail.com> * Add revocation. This allows leases to be effectively revoked by removing all of the objects they have access to. The lease itself hangs around as it's hanging off a file. * Free the leases IDR when the master is destroyed * _drm_lease_held should look at lessees, not lessor * Allow non-master files to check for lease status Changes in v4, suggested by Dave Airlie <airlied@gmail.com> * Formatting and whitespace changes Changes in v5 (airlied) * check DRIVER_MODESET before lease destroy call * check DRIVER_MODESET for lease revoke (Chris) * Use idr_mutex uniformly for all lease elements of struct drm_master. (Keith) Signed-off-by: Keith Packard <keithp@keithp.com>
2017-03-15 13:26:41 +08:00
drm_syncobj.o drm_lease.o
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
drm: Add a simple generator of random permutations When testing, we want a random but yet reproducible order in which to process elements. Here we create an array which is a random (using the Tausworthe PRNG) permutation of the order in which to execute. Note these are simple helpers intended to be merged upstream in lib/ v2: Tidier code by David Herrmann v3: Add reminder that this code is intended to be temporary, with at least the bulk of the prandom changes going to lib/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-6-chris@chris-wilson.co.uk
2016-12-22 16:36:08 +08:00
drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
drm: compile drm_vm.c only when needed drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU. Use a new DRM_VM to define when drm_vm.c in needed. stub drm_legacy_vma_flush() to avoid compilation issues version 4: - a "config DRM_VM" in Kconfig Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Fix conflict.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-01-04 17:12:56 +08:00
drm-$(CONFIG_DRM_VM) += drm_vm.o
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
drm-$(CONFIG_COMPAT) += drm_ioc32.o
DRM: Add DRM GEM CMA helper Many embedded drm devices do not have a IOMMU and no dedicated memory for graphics. These devices use CMA (Contiguous Memory Allocator) backed graphics memory. This patch provides helper functions to be able to share the code. The code technically does not depend on CMA as the backend allocator, the name has been chosen because CMA makes for a nice, short but still descriptive function prefix. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> [Make DRM_GEM_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-06-27 21:30:18 +08:00
drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o
drm: only build ati_pcigart if PCI enabled Prevent ati_pcigart.c being built unless PCI is enabled. The exported functions in this file are only used by drivers which depend on PCI (namely r128 and radeon), and it tries to use PCI specific functions (pci_unmap_page, pci_map_page, and pci_dma_mapping_error) that cause compiler errors when PCI is disabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-23 19:12:10 +08:00
drm-$(CONFIG_PCI) += ati_pcigart.o
drm: Add panel support Add a very simple framework to register and lookup panels. Panel drivers can initialize a DRM panel and register it with the framework, allowing them to be retrieved and used by display drivers. Currently only support for DPMS and obtaining panel modes is provided. However it should be sufficient to enable a large number of panels. The framework should also be easily extensible to support more sophisticated kinds of panels such as DSI. The framework hasn't been tied into the DRM core, even though it should be easily possible to do so if that's what we want. In the current implementation, display drivers can simple make use of it to retrieve a panel, obtain its modes and control its DPMS mode. Note that this is currently only tested on systems that boot from a device tree. No glue code has been written yet for systems that use platform data, but it should be easy to add. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 19:36:43 +08:00
drm-$(CONFIG_DRM_PANEL) += drm_panel.o
drm: add of_graph endpoint helper to find possible CRTCs Add a helper to allow encoders to find their possible CRTCs from the OF graph without having to re-implement this functionality. We add a device_node to drm_crtc which corresponds with the port node in the DT description of the CRTC device. We can then scan the DRM device list for CRTCs to find their index, matching the appropriate CRTC using the port device_node, thus building up the possible CRTC mask. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-15 18:07:12 +08:00
drm-$(CONFIG_OF) += drm_of.o
drm: Remove __OS_HAS_AGP We already express the drm/agp depencies correctly in Kconfig, so we can rip this remnant from the shared drm core days. Aside: Pretty much all the #ifdefs in radeon/nouveau could be killed if ttm would provide dummy functions. I'm not going to volunteer for that though. v2: Use IS_ENABLED(CONFIG_AGP) as suggested by Ville v3: Polish from Ville's review. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v2) Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-09 22:45:52 +08:00
drm-$(CONFIG_AGP) += drm_agpsupport.o
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 23:21:06 +08:00
drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
drm: handle override and firmware EDID at drm_do_get_edid() level Handle debugfs override edid and firmware edid at the low level to transparently and completely replace the real edid. Previously, we practically only used the modes from the override EDID, and none of the other data, such as audio parameters. This change also prevents actual EDID reads when the EDID is to be overridden, but retains the DDC probe. This is useful if the reason for preferring override EDID are problems with reading the data, or corruption of the data. Move firmware EDID loading from helper to core, as the functionality moves to lower level as well. This will result in a change of module parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which arguably makes more sense anyway. Some future work remains related to override and firmware EDID validation. Like before, no validation is done for override EDID. The firmware EDID is validated separately in the loader. Some unification and deduplication would be in order, to validate all of them at the drm_do_get_edid() level, like "real" EDIDs. v2: move firmware loading to core v3: rebase, commit message refresh Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com
2017-09-12 16:19:26 +08:00
drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
drm: Move plane helpers into drm_kms_helper.ko The drm core shouldn't depend upon any helpers, and we make sure this doesn't accidentally happen by moving them into the helper-only drm_kms_helper.ko module. v2: Don't break the build for vmwgfx, spotted by Matt. v3: Unbreak the depency loop around CONFIG_FB (not actually a loop since it involves select). Reported by Chris. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-04 01:30:45 +08:00
drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
drm/kms_helper: Add a common place to call init and exit functions. The module_init and module_exit functions will start here, and call the subsequent init's and exit's. v10: - Keep __init on drm_fb_helper init function. - Move MODULE_* macros to the common file. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-2-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:18 +08:00
drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
drm: Add helper for simple display pipeline Provides helper functions for drivers that have a simple display pipeline. Plane, crtc and encoder are collapsed into one entity. Changes since v4: - Remove drm_connector_register() call - Forgot to assign pipe->connector Changes since v3: - (struct drm_simple_display_pipe *)->funcs should be const Changes since v2: - Drop Kconfig knob DRM_KMS_HELPER - Expand documentation Changes since v1: - Add DOC header and add to gpu.tmpl - Fix docs: @funcs is optional, "negative error code", "This hook is optional." - Add checks to drm_simple_kms_plane_atomic_check() Cc: jsarha@ti.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465570559-14238-1-git-send-email-noralf@tronnes.org
2016-06-10 22:55:59 +08:00
drm_kms_helper_common.o drm_dp_dual_mode_helper.o \
drm: Add SCDC helpers SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate. This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Addressed review comments from Ville - Handle the I2c return values in a better way (dp_dual_mode) - Make the macros for SCDC Major/Minor more readable, by adding a 'GET' in the macro names V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com
2017-03-13 19:23:59 +08:00
drm_simple_kms_helper.o drm_modeset_helper.o \
drm: Add GEM backed framebuffer library This library provides helpers for drivers that don't subclass drm_framebuffer and are backed by drm_gem_object. The code is taken from drm_fb_cma_helper. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-2-git-send-email-noralf@tronnes.org
2017-08-13 21:31:44 +08:00
drm_scdc_helper.o drm_gem_framebuffer_helper.o
drm/kms_helper: Add a common place to call init and exit functions. The module_init and module_exit functions will start here, and call the subsequent init's and exit's. v10: - Keep __init on drm_fb_helper init function. - Move MODULE_* macros to the common file. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-2-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:18 +08:00
drm/bridge: Build the panel wrapper in drm_kms_helper This fixes the following depmod error when building drm as a module: depmod: ERROR: Found 6 modules in dependency cycles! depmod: ERROR: Cycle detected: drm -> drm_kms_helper -> drm Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.") Tested-by: Lofstedt, Marta <marta.lofstedt@intel.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/3fd262cf-1db6-4335-320c-af92f9014502@linux.intel.com
2017-06-06 22:31:50 +08:00
drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o
drm: Add top level Kconfig option for DRM fbdev emulation Legacy fbdev emulation support via DRM is achieved through KMS FB helpers. Most modesetting drivers enable provide fbdev emulation by default by selecting KMS FB helpers. A few provide a separate Kconfig option for the user to enable or disbale fbdev emulation. Enabling fbdev emulation is finally a distro-level decision. Having a top level Kconfig option for fbdev emulation helps by providing a uniform way to enable/disable fbdev emulation for any modesetting driver. It also lets us remove unnecessary driver specific Kconfig options that causes bloat. With a top level Kconfig in place, we can stub out the fb helper functions when not needed without breaking functionality. Having stub functions also prevents drivers to require wrapping fb helper function calls with #ifdefs. DRM_FBDEV_EMULATION defaults to y since many drivers enable fbdev emulation by default and majority of distributions expect the fbdev interface in the kernel. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-05 14:58:57 +08:00
drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
DRM: Add DRM KMS/FB CMA helper This patchset introduces a set of helper function for implementing the KMS framebuffer layer for drivers which use the DRM GEM CMA helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> [Make DRM_KMS_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-02 22:37:47 +08:00
drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
drm: split crtc/fb helpers into a separate module I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 13:45:33 +08:00
drm/kms: fix kms helper license + Kconfig Allow the KMS module to work properly, and also rename it to KMS_HELPER so its clearer what its for. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 09:08:32 +08:00
obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
drm: Fix O= out-of-tree builds for selftests Kbuild really doesn't like non-recursive Makefiles, but they do work as long as you build without O= Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 50f0033d1a0f ("drm: Add some kselftests for the DRM range manager (struct drm_mm)") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1482918077-30027-1-git-send-email-daniel.vetter@ffwll.ch
2016-12-28 17:41:17 +08:00
obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
drm: split crtc/fb helpers into a separate module I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 13:45:33 +08:00
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
obj-$(CONFIG_DRM) += drm.o
drm: Add MIPI DSI bus support MIPI DSI bus allows to model DSI hosts and DSI peripherals using the Linux driver model. DSI hosts are registered by the DSI host drivers. During registration DSI peripherals will be created from the children of the DSI host's device tree node. Support for registration from board-setup code will be added later when needed. DSI hosts expose operations which can be used by DSI peripheral drivers to access associated devices. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-04 23:35:12 +08:00
obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
drm: Add panel orientation quirks, v6. Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so the firmware just leaves things as is and we cannot figure out that the display is oriented non upright from the hardware. So at least on x86, we need a quirk table for this. This commit adds a DMI based quirk table which is initially populated with 5 such devices: Asus T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17. This quirk table will be used by the drm code to let userspace know that the display is not mounted upright inside the devices case through a new panel orientation drm-connector property, as well as to tell fbcon to rotate the console so that it shows the right way up. Changes in v5: -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk() -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop, keeping only the (identical) sys_vendor and product_name matches. This is necessary because an older version of the bios has board_vendor set to VOIS instead of VIOS Changes in v6: -Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
2017-11-26 03:35:48 +08:00
obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
drm: Add support for ARM's HDLCD controller. The HDLCD controller is a display controller that supports resolutions up to 4096x4096 pixels. It is present on various development boards produced by ARM Ltd and emulated by the latest Fast Models from the company. Cc: David Airlie <airlied@linux.ie> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> [Kconfig cleanup and !CONFIG_PM fixes] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-03 02:48:39 +08:00
obj-$(CONFIG_DRM_ARM) += arm/
drm/radeon: fix driver initialization order so radeon kms can be builtin TTM need to be initialized before radeon if KMS is enabled otherwise the kernel will crash hard. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-23 00:16:13 +08:00
obj-$(CONFIG_DRM_TTM) += ttm/
drm: fix gpu scheduler link order It should initialize before the drivers using it. Signed-off-by: Christian König <christian.koenig@amd.com> Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104736 Reviewed-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-24 18:44:49 +08:00
obj-$(CONFIG_DRM_SCHED) += scheduler/
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
obj-$(CONFIG_DRM_TDFX) += tdfx/
obj-$(CONFIG_DRM_R128) += r128/
drm/amd: Closed hash table with low overhead (v2) This adds a statically sized closed hash table implementation with low memory and CPU overhead. The API is inspired by kfifo. Storing, retrieving and deleting data does not involve any dynamic memory management, which makes it ideal for use in interrupt context. Static memory usage per entry comprises a 32 or 64 bit hash key, two bits for occupancy tracking and the value size stored in the table. No list heads or pointers are needed. Therefore this data structure should be quite cache-friendly, too. It uses linear probing and lazy deletion. During lookups free space is reclaimed and entries relocated to speed up future lookups. v2: squash in do_div and _BITOPS_LONG_SHIFT fixes Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-25 07:22:32 +08:00
obj-y += amd/lib/
drm: Put amdkfd before radeon in drm Makefile When amdkfd and radeon are compiled inside the kernel image (not as modules), radeon will load before amdkfd, which will cause a bug when radeon will probe the GPUs. When the two drivers are compiled as modules, amdkfd is loaded after radeon is loaded but before radeon starts probing the GPUs. This is done because radeon loads the amdkfd module through symbol_request function. This patch makes amdkfd load before radeon when they are both compiled inside the kernel image, which makes the behavior similar to the case when they are modules, and prevents the kernel bug. Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-12-21 21:21:41 +08:00
obj-$(CONFIG_HSA_AMD) += amd/amdkfd/
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
obj-$(CONFIG_DRM_RADEON)+= radeon/
drm/amdgpu: add core driver (v4) This adds the non-asic specific core driver code. v2: remove extra kconfig option v3: implement minor fixes from Fengguang Wu v4: fix cast in amdgpu_ucode.c Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-21 04:55:21 +08:00
obj-$(CONFIG_DRM_AMDGPU)+= amd/amdgpu/
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
obj-$(CONFIG_DRM_MGA) += mga/
obj-$(CONFIG_DRM_I810) += i810/
drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass Very old numbers indicate this is a 66% improvement when remapping the entire object for fence contention - due to the elimination of track_pfn_insert and its strcmp. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Testcase: igt/gem_fence_upload/performance Testcase: igt/gem_mmap_gtt Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-6-chris@chris-wilson.co.uk
2016-08-19 23:54:28 +08:00
obj-$(CONFIG_DRM_I915) += i915/
mgag200: initial g200se driver (v2) This is a driver for the G200 server engines chips, it doesn't driver any of the Matrix G series desktop cards. It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards. Its based on previous work done my Matthew Garrett but remodelled to follow the same style and flow as the AST server driver. It also works along the same lines as the AST server driver wrt memory management. There is no userspace driver planned, xf86-video-modesetting should be used. It also appears these GPUs have no ARGB hw cursors. v2: add missing tagfifo reset + G200 SE memory bw setup pieces. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-17 22:01:25 +08:00
obj-$(CONFIG_DRM_MGAG200) += mgag200/
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-03 05:01:12 +08:00
obj-$(CONFIG_DRM_VC4) += vc4/
drm/kms: driver for virtual cirrus under qemu This is the initial driver for emulated cirrus GPU found in qemu. This driver only supports the emulated GPU and doesn't attempt to bind to any real cirrus GPUs. This driver is intended to be used with xf86-video-modesetting in userspace. It requires at least version 0.3.0 This follow the same design as ast and mgag200, and is based on work done by Matthew Garrett previously. This GPU has no hw cursor, and it can't scanout 32-bpp, only packed 24-bpp. i.e. it sucks. Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-17 21:12:29 +08:00
obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus/
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
obj-$(CONFIG_DRM_SIS) += sis/
obj-$(CONFIG_DRM_SAVAGE)+= savage/
drm/vmwgfx: Add DRM driver for VMware Virtual GPU This commit adds the vmwgfx driver for the VWware Virtual GPU aka SVGA. The driver is under staging the same as Nouveau and Radeon KMS. Hopefully the 2D ioctls are bug free and don't need changing, so that part of the API should be stable. But there there is a pretty big chance that the 3D API will change in the future. Signed-off-by: Thomas Hellström <thellstrom@vmware.com> Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 08:19:58 +08:00
obj-$(CONFIG_DRM_VMWGFX)+= vmwgfx/
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
obj-$(CONFIG_DRM_VIA) +=via/
drm/vgem: implement virtual GEM This patch implements the virtual GEM driver with PRIME sharing which allows vgem to import a gem object from other drivers for the purpose of mmap-ing them to userspace. The mmap is done using the mmap operation exported by other drivers. v2: remove platform_device and do not attach to dma bufs v3: use drm helpers for get/put pages v4: correct dumb create pitch Reviewed-by: Rob Clark <robdclark@gmail.com> (v3) Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> (v3) Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Zach Reizner <zachr@google.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-05 08:33:41 +08:00
obj-$(CONFIG_DRM_VGEM) += vgem/
drm/nouveau: Add DRM driver for NVIDIA GPUs This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 17:24:15 +08:00
obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/
DRM: add DRM Driver for Samsung SoC EXYNOS4210. This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables only FIMD yet but we will add HDMI support also in the future. this patch is based on git repository below: git://people.freedesktop.org/~airlied/linux.git branch name: drm-next commit-id: 88ef4e3f4f616462b78a7838eb3ffc3818d30f67 you can refer to our working repository below: http://git.infradead.org/users/kmpark/linux-2.6-samsung branch name: samsung-drm We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c based on Linux framebuffer) but couldn't so because lowlevel codes of s3c-fb.c are included internally and so FIMD module of this driver has its own lowlevel codes. We used GEM framework for buffer management and DMA APIs(dma_alloc_*) for buffer allocation so we can allocate physically continuous memory for DMA through it and also we could use CMA later if CMA is applied to mainline. Refer to this link for CMA(Continuous Memory Allocator): http://lkml.org/lkml/2011/7/20/45 this driver supports only physically continuous memory(non-iommu). Links to previous versions of the patchset: v1: < https://lwn.net/Articles/454380/ > v2: < http://www.spinics.net/lists/kernel/msg1224275.html > v3: < http://www.spinics.net/lists/dri-devel/msg13755.html > v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 > v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 > Changelog v2: DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command. this feature maps user address space to physical memory region once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl. DRM: code clean and add exception codes. Changelog v3: DRM: Support multiple irq. FIMD and HDMI have their own irq handler but DRM Framework can regiter only one irq handler this patch supports mutiple irq for Samsung SoC. DRM: Consider modularization. each DRM, FIMD could be built as a module. DRM: Have indenpendent crtc object. crtc isn't specific to SoC Platform so this patch gets a crtc to be used as common object. created crtc could be attached to any encoder object. DRM: code clean and add exception codes. Changelog v4: DRM: remove is_defult from samsung_fb. is_default isn't used for default framebuffer. DRM: code refactoring to fimd module. this patch is be considered with multiple display objects and would use its own request_irq() to register a irq handler instead of drm framework's one. DRM: remove find_samsung_drm_gem_object() DRM: move kernel private data structures and definitions to driver folder. samsung_drm.h would contain only public information for userspace ioctl interface. DRM: code refactoring to gem modules. buffer module isn't dependent of gem module anymore. DRM: fixed security issue. DRM: remove encoder porinter from specific connector. samsung connector doesn't need to have generic encoder. DRM: code clean and add exception codes. Changelog v5: DRM: updated fimd(display controller) driver. added various pixel formats, color key and pixel blending features. DRM: removed end_buf_off from samsung_drm_overlay structure. this variable isn't used and end buffer address would be calculated by each sub driver. DRM: use generic function for mmap_offset. replaced samsung_drm_gem_create_mmap_offset() and samsung_drm_free_mmap_offset() with generic ones applied to mainline recentrly. DRM: removed unnecessary codes and added exception codes. DRM: added comments and code clean. Changelog v6: DRM: added default config options. DRM: added padding for 64-bit align. DRM: changed prefix 'samsung' to 'exynos' Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-04 18:19:01 +08:00
obj-$(CONFIG_DRM_EXYNOS) +=exynos/
drm: rockchip: Add basic drm driver This patch adds the basic structure of a DRM Driver for Rockchip Socs. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-08-22 18:36:26 +08:00
obj-$(CONFIG_DRM_ROCKCHIP) +=rockchip/
gma500: Now connect up to the DRM build to finish the job Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-04 02:22:48 +08:00
obj-$(CONFIG_DRM_GMA500) += gma500/
drm/udl: initial UDL driver (v4) This is an initial drm/kms driver for the displaylink devices. Supports fb_defio, supports KMS dumb interface supports 24bpp via conversion to 16bpp, hw can do this better. supports hot unplug using new drm core features. On an unplug, it disables connector polling, unplugs connectors from sysfs, unplugs fbdev layer (using Kay's API), drops all the USB device URBs, and call the drm core to unplug the device. This driver is based in large parts on udlfb.c so I've licensed it under GPLv2. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-15 05:14:24 +08:00
obj-$(CONFIG_DRM_UDL) += udl/
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2) This is the initial driver for the Aspeed Technologies chips found in servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It doesn't support the AST11xx due to lack of hw to test it on, and them requiring different codepaths. This driver is intended to be used with xf86-video-modesetting in userspace. This driver has a slightly different design than other KMS drivers, but future server chips will probably share similiar setup. As these GPUs commonly have low video RAM, it doesn't make sense to put the kms console in VRAM always. This driver places the kms console into system RAM, and does dirty updates to a copy in video RAM. When userspace sets a new scanout buffer, it forcefully evicts the video RAM console, and X can create a framebuffer that can use all of of video RAM. This driver uses TTM but in a very simple fashion to control the eviction to system RAM of the console, and multiple servers. v2: add s/r support, fix Kconfig. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
obj-$(CONFIG_DRM_AST) += ast/
DRM: Armada: Add Armada DRM driver This patch adds support for the pair of LCD controllers on the Marvell Armada 510 SoCs. This driver supports: - multiple contiguous scanout buffers for video and graphics - shm backed cacheable buffer objects for X pixmaps for Vivante GPU acceleration - dual lcd0 and lcd1 crt operation - video overlay on each LCD crt via DRM planes - page flipping of the main scanout buffers - DRM prime for buffer export/import This driver is trivial to extend to other Armada SoCs. Included in this commit is the core driver with no output support; output support is platform and encoder driver dependent. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-15 20:59:49 +08:00
obj-$(CONFIG_DRM_ARMADA) += armada/
drm: add Atmel HLCDC Display Controller support The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display controller device. This display controller supports at least one primary plane and might provide several overlays and an hardware cursor depending on the IP version. At the moment, this driver only implements an RGB connector to interface with LCD panels, but support for other kind of external devices might be added later. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-06 18:13:28 +08:00
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
drm: Renesas R-Car Display Unit DRM driver The R-Car Display Unit (DU) DRM driver supports both superposition processors and all eight planes in RGB and YUV formats with alpha blending. Only VGA and LVDS encoders and connectors are currently supported. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-19 19:54:11 +08:00
obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
drm: Renesas SH Mobile DRM driver The SH Mobile LCD controller (LCDC) DRM driver supports the main graphics plane in RGB and YUV formats, as well as the overlay planes (in alpha-blending mode only). Only flat panel outputs using the parallel interface are supported. Support for SYS panels, HDMI and DSI is currently not implemented. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-26 19:53:59 +08:00
obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
drm/omap: move omapdss & displays under omapdrm Now that omapfb has its own copy of omapdss and display drivers, we can move omapdss and display drivers which omapdrm uses to omapdrm's directory. We also need to change the main drm Makefile so that omapdrm directory is always entered, because omapdss has a file that can't be built as a module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-10 02:26:00 +08:00
obj-y += omapdrm/
drm: Add Allwinner A10 Display Engine support The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-29 16:36:23 +08:00
obj-$(CONFIG_DRM_SUN4I) += sun4i/
drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT If I read Documentation/kbuild/makefiles.txt section 3.6 right, this patch should not be needed. However, without this patch the objects needed for DRM_TILCDC_SLAVE_COMPAT are not linked, if DRM_TILCDC is built as module. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-18 18:26:50 +08:00
obj-y += tilcdc/
drm: add new QXL driver. (v1.4) QXL is a paravirtual graphics device used by the Spice virtual desktop interface. The drivers uses GEM and TTM to manage memory, the qxl hw fencing however is quite different than normal TTM expects, we have to keep track of a number of non-linear fence ids per bo that we need to have released by the hardware. The releases are freed from a workqueue that wakes up and processes the release ring. releases are suballocated from a BO, there are 3 release categories, drawables, surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling. The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface ids. This requires a newer version of the QXL userspace driver, so shouldn't be enabled until that has been placed into your distro of choice. Authors: Dave Airlie, Alon Levy v1.1: fixup some issues in the ioctl interface with padding v1.2: add module device table v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq, don't try flush release ring (broken hw), fix -modesetting. v1.4: fbcon cpu usage reduction + suitable accel flags. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
obj-$(CONFIG_DRM_QXL) += qxl/
drm/bochs: new driver DRM driver for (virtual) vga cards using the bochs dispi interface, such as the qemu standard vga (qemu -vga std). Don't bother supporting anything but 32bpp for now, even though the virtual hardware is able to do that. Known issue: mmap(/dev/fb0) doesn't work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 01:04:46 +08:00
obj-$(CONFIG_DRM_BOCHS) += bochs/
Add virtio gpu driver. This patch adds a kms driver for the virtio gpu. The xorg modesetting driver can handle the device just fine, the framebuffer for fbcon is there too. Qemu patches for the host side are under review currently. The pci version of the device comes in two variants: with and without vga compatibility. The former has a extra memory bar for the vga framebuffer, the later is a pure virtio device. The only concern for this driver is that in the virtio-vga case we have to kick out the firmware framebuffer. Initial revision has only 2d support, 3d (virgl) support requires some more work on the qemu side and will be added later. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-09 08:02:56 +08:00
obj-$(CONFIG_DRM_VIRTIO_GPU) += virtio/
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
obj-$(CONFIG_DRM_MSM) += msm/
drm/tegra: Move driver to DRM tree In order to make subsystem-wide changes easier, move the Tegra DRM driver back into the DRM tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-09 16:32:49 +08:00
obj-$(CONFIG_DRM_TEGRA) += tegra/
drm/stm: Add STM32 LTDC driver This controller provides output signals to interface directly a variety of LCD and TFT panels. These output signals are: RGB signals (up to 24bpp), vertical & horizontal synchronisations, data enable and the pixel clock. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-5-git-send-email-yannick.fertre@st.com Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-04-14 18:13:34 +08:00
obj-$(CONFIG_DRM_STM) += stm/
drm: sti: add VTG driver Video Time Generator drivers are used to synchronize the compositor and tvout hardware IPs by providing line count, sample count, synchronization signals (HSYNC, VSYNC) and top and bottom fields indication. VTG are used by pair for each data path (main or auxiliary) one for master and one for slave. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-31 00:20:56 +08:00
obj-$(CONFIG_DRM_STI) += sti/
drm: imx: Move imx-drm driver out of staging The imx-drm driver was put into staging mostly for the following reasons, all of which have been addressed or superseded: - convert the irq driver to use linear irq domains - work out the device tree bindings, this lead to the common of_graph bindings being used - factor out common helper functions, this mostly resulted in the component framework and drm of_graph helpers. Before adding new fixes, and certainly before adding new features, move it into its proper place below drivers/gpu/drm. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-24 23:33:34 +08:00
obj-$(CONFIG_DRM_IMX) += imx/
drm/mediatek: Add DRM Driver for Mediatek SoC MT8173. This patch adds an initial DRM driver for the Mediatek MT8173 DISP subsystem. It currently supports two fixed output streams from the OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: YT Shen <yt.shen@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Mao Huang <littlecvr@chromium.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-01-05 01:36:34 +08:00
obj-$(CONFIG_DRM_MEDIATEK) += mediatek/
drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 22:29:37 +08:00
obj-$(CONFIG_DRM_MESON) += meson/
drm/nouveau: Add DRM driver for NVIDIA GPUs This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 17:24:15 +08:00
obj-y += i2c/
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 21:10:14 +08:00
obj-y += panel/
drm/bridge: Add PTN3460 bridge driver This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS bridge chip. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-02-24 18:31:24 +08:00
obj-y += bridge/
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
drm/etnaviv: add initial etnaviv DRM driver This adds the etnaviv DRM driver and hooks it up in Makefiles and Kconfig. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-04 01:21:29 +08:00
obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
drm: Add support of ARC PGU display controller ARC PGU could be found on some development boards from Synopsys. This is a simple byte streamer that reads data from a framebuffer and sends data to the single encoder. Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-snps-arc@lists.infradead.org
2016-02-19 20:30:26 +08:00
obj-$(CONFIG_DRM_ARCPGU)+= arc/
drm/hisilicon: Add hisilicon kirin drm master driver Add kirin DRM master driver for hi6220 SoC which used in HiKey board. Add dumb buffer feature. Add prime dmabuf feature. v9: Add OF and ARM64 depends on in Kconfig v8: None. v7: - Add config.mutex protection when accessing mode_config.connector_list. - Clean up match data getting. v6: None. v5: None. v4: None. v3: - Move and rename all the files to kirin sub-directory. So that we could separate different seires SoCs' driver. - Replace drm_platform_init, load, unload implementation. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
2015-10-09 18:00:56 +08:00
obj-y += hisilicon/
drm: zte: add initial vou drm driver It adds the initial ZTE VOU display controller DRM driver. There are still some features to be added, like overlay plane, scaling, and more output devices support. But it's already useful with dual CRTCs and HDMI monitor working. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2016-09-22 19:52:39 +08:00
obj-$(CONFIG_DRM_ZTE) += zte/
drm: Add new driver for MXSFB controller Add new driver for the MXSFB controller found in i.MX23/28/6SX . The MXSFB controller is a simple framebuffer controller with one parallel LCD output. Unlike the MXSFB fbdev driver that is used on these systems now, this driver uses the DRM/KMS framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org>
2016-08-19 02:23:01 +08:00
obj-$(CONFIG_DRM_MXSFB) += mxsfb/
drm: Add DRM support for tiny LCD displays tinydrm provides helpers for very simple displays that can use CMA backed framebuffers and need flushing on changes. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thierry Reding <treding@nvidia.com>
2017-01-22 07:15:00 +08:00
obj-$(CONFIG_DRM_TINYDRM) += tinydrm/
drm/pl111: Initial drm/kms driver for pl111 This is a modesetting driver for the pl111 CLCD display controller found on various ARM platforms such as the Versatile Express. The driver has only been tested on the bcm911360_entphn platform so far, with PRIME-based buffer sharing between vc4 and clcd. It reuses the existing devicetree binding, while not using quite as many of its properties as the fbdev driver does (those are left for future work). v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks to DRM core's excellent new helpers. v3: Don't match pl110 any more, don't attach if we don't have a DRM panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple display helper, use drm_gem_cma_dumb_create (same as our wrapper). v4: Change the driver's .name to not clash with fbdev in sysfs, drop platform alias, drop redundant "drm" in DRM driver name, hook up .prepare_fb to the CMA helper so that DMA fences should work. v5: Move register definitions inside the driver directory, fix build in COMPILE_TEST and !AMBA mode. v6: Drop TIM2_CLKSEL for now to be consistent with existing DT bindings, switch back to external register definitions. Signed-off-by: Tom Cooksey <tom.cooksey@arm.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5) Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 11:17:46 +08:00
obj-$(CONFIG_DRM_PL111) += pl111/
drm/tve200: Add new driver for TVE200 This adds a new DRM driver for the Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. I do not have definitive word from anyone at Faraday that this IP block is theirs, but it bears the hallmark of their 3-digit version code (200) and is used in two SoCs from completely different companies. (Grain Media was fully owned by Faraday until it was transferred to NovoTek this january, and Faraday did lots of work on the StorLink SoCs.) The D-Link DIR-685 uses this in connection with the Ilitek ILI9322 panel driver that supports BT.656 input, while the GM8180 apparently has been used with the Cirrus Logic CS4954 digital video encoder. The oldest user seems to be something called Techwall 2835. This driver is heavily inspired by Eric Anholt's PL111 driver and therefore I have mentioned all the ancestor authors in the header file. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170820100557.24991-2-linus.walleij@linaro.org
2017-08-20 18:05:55 +08:00
obj-$(CONFIG_DRM_TVE200) += tve200/