UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/video/backlight/Kconfig

288 lines
8.3 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Backlight & LCD drivers configuration
#
menuconfig BACKLIGHT_LCD_SUPPORT
bool "Backlight & LCD device support"
help
Enable this to be able to choose the drivers for controlling the
backlight and the LCD panel on some platforms, for example on PDAs.
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
if BACKLIGHT_LCD_SUPPORT
backlight: Fix order of Kconfig entries Switch the order of LCD_CLASS_DEVICE and BACKLIGHT_CLASS_DEVICE, so that it's possible to insert LCD devices without borking the dependency displays of xconfig and other config tools. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-05-30 06:07:10 +08:00
#
# LCD
#
config LCD_CLASS_DEVICE
tristate "Lowlevel LCD controls"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default m
help
backlight: Fix order of Kconfig entries Switch the order of LCD_CLASS_DEVICE and BACKLIGHT_CLASS_DEVICE, so that it's possible to insert LCD devices without borking the dependency displays of xconfig and other config tools. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-05-30 06:07:10 +08:00
This framework adds support for low-level control of LCD.
Some framebuffer devices connect to platform-specific LCD modules
in order to have a platform-specific way to control the flat panel
(contrast and applying power to the LCD (not to the backlight!)).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
if LCD_CLASS_DEVICE
lcd: add SPI-based LCD and backlight driver for SHARP corgi/spitz The driver is based on different source files including corgi_ssp.c, corgi_lcd.c and corgi_bl.c, previously authored by Richard Purdie and many others. The LCD and Backlight device actually share the same SPI device, so they are made into this single driver. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-29 04:21:44 +08:00
config LCD_CORGI
tristate "LCD Panel support for SHARP corgi/spitz model"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SPI_MASTER && PXA_SHARPSL
lcd: add SPI-based LCD and backlight driver for SHARP corgi/spitz The driver is based on different source files including corgi_ssp.c, corgi_lcd.c and corgi_bl.c, previously authored by Richard Purdie and many others. The LCD and Backlight device actually share the same SPI device, so they are made into this single driver. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-29 04:21:44 +08:00
help
Say y here to support the LCD panels usually found on SHARP
corgi (C7x0) and spitz (Cxx00) models.
backlight: Add Epson L4F00242T03 LCD driver The Epson LCD L4F00242T03 is mounted on the Freescale i.MX31 PDK board. Based upon Marek Vasut work in l4f00242t03.c, this driver provides basic init and power on/off functionality for this device through the sysfs lcd interface. Unfortunately Datasheet for this device are not available and all the control sequences sent to the display were copied from the freescale driver that in the i.MX31 Linux BSP. As in the i.MX31PDK board the core and io suppliers are voltage regulators, that functionality is embedded here, but not strict. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-18 23:42:11 +08:00
config LCD_L4F00242T03
tristate "Epson L4F00242T03 LCD"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SPI_MASTER && GENERIC_GPIO
backlight: Add Epson L4F00242T03 LCD driver The Epson LCD L4F00242T03 is mounted on the Freescale i.MX31 PDK board. Based upon Marek Vasut work in l4f00242t03.c, this driver provides basic init and power on/off functionality for this device through the sysfs lcd interface. Unfortunately Datasheet for this device are not available and all the control sequences sent to the display were copied from the freescale driver that in the i.MX31 Linux BSP. As in the i.MX31PDK board the core and io suppliers are voltage regulators, that functionality is embedded here, but not strict. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-18 23:42:11 +08:00
help
SPI driver for Epson L4F00242T03. This provides basic support
for init and powering the LCD up/down through a sysfs interface.
backlight: spi driver for LMS283GF05 LCD ADd support for the SPI part of LMS283GF05 LCD. The LCD uses SPI for initialization and powerdown sequences. No further defails are specified in the datasheet about the initialization/powerdown sequence, just the magic numbers that have to be sent over SPI bus. This LCD can be found in the Aeronix Zipit Z2 handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-08-07 07:07:10 +08:00
config LCD_LMS283GF05
tristate "Samsung LMS283GF05 LCD"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SPI_MASTER && GENERIC_GPIO
backlight: spi driver for LMS283GF05 LCD ADd support for the SPI part of LMS283GF05 LCD. The LCD uses SPI for initialization and powerdown sequences. No further defails are specified in the datasheet about the initialization/powerdown sequence, just the magic numbers that have to be sent over SPI bus. This LCD can be found in the Aeronix Zipit Z2 handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-08-07 07:07:10 +08:00
help
SPI driver for Samsung LMS283GF05. This provides basic support
for powering the LCD up/down through a sysfs interface.
backlight: Add Samsung LTV350QV LCD driver This patch adds support for powering on and off the Samsung LTV350QV LCD panel via SPI. The driver responds to framebuffer power management, it powers off the panel on reboot/halt/poweroff. It can also be controlled through sysfs. The panel is powered up when the module is loaded, and off when the module is unloaded. Verified on AVR32 STK1000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-03 06:15:49 +08:00
config LCD_LTV350QV
tristate "Samsung LTV350QV LCD Panel"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SPI_MASTER
backlight: Add Samsung LTV350QV LCD driver This patch adds support for powering on and off the Samsung LTV350QV LCD panel via SPI. The driver responds to framebuffer power management, it powers off the panel on reboot/halt/poweroff. It can also be controlled through sysfs. The panel is powered up when the module is loaded, and off when the module is unloaded. Verified on AVR32 STK1000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-03 06:15:49 +08:00
help
If you have a Samsung LTV350QV LCD panel, say y to include a
power control driver for it. The panel starts up in power
off state, so you need this driver in order to see any
output.
The LTV350QV panel is present on all ATSTK1000 boards.
fb: add support for the ILI9320 video display controller Provide support for the ILI9320 display controller chip which is found in many LCD displays. Included with this is support for an example LCD using this chip, the VGG2432A4. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 12:31:37 +08:00
config LCD_ILI9320
tristate
help
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
lcd: add support for Toppoly TDO24M series LCD panels This type of LCD panel can be found on PXA3xx/Littleton platforms. Add LCD device and SPI-based driver for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01 06:50:23 +08:00
config LCD_TDO24M
backlight: add support for Toppoly TDO35S series to tdo24m lcd driver Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-12-03 16:48:52 +08:00
tristate "Toppoly TDO24M and TDO35S LCD Panels support"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SPI_MASTER
lcd: add support for Toppoly TDO24M series LCD panels This type of LCD panel can be found on PXA3xx/Littleton platforms. Add LCD device and SPI-based driver for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01 06:50:23 +08:00
help
backlight: add support for Toppoly TDO35S series to tdo24m lcd driver Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-12-03 16:48:52 +08:00
If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
lcd: add support for Toppoly TDO24M series LCD panels This type of LCD panel can be found on PXA3xx/Littleton platforms. Add LCD device and SPI-based driver for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01 06:50:23 +08:00
include the support for it.
fb: add support for the ILI9320 video display controller Provide support for the ILI9320 display controller chip which is found in many LCD displays. Included with this is support for an example LCD using this chip, the VGG2432A4. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 12:31:37 +08:00
config LCD_VGG2432A4
tristate "VGG2432A4 LCM device support"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SPI_MASTER
fb: add support for the ILI9320 video display controller Provide support for the ILI9320 display controller chip which is found in many LCD displays. Included with this is support for an example LCD using this chip, the VGG2432A4. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 12:31:37 +08:00
select LCD_ILI9320
help
If you have a VGG2432A4 panel based on the ILI9320 controller chip
then say y to include a power driver for it.
lcd: add platform_lcd driver Add a platform_lcd driver to allow boards with simple lcd power controls to register themselves easily. [akpm@linux-foundation.org: build fix] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 12:31:38 +08:00
config LCD_PLATFORM
tristate "Platform LCD controls"
help
This driver provides a platform-device registered LCD power
control interface.
backlight: add support for Sharp SL-6000 LCD and backlight drivers On Sharp SL-6000 lcd/backlight is a bit complex, so add two drivers one for lcd-driving chip, other one for dac regulating the backlight LEDS. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net>
2008-09-14 00:58:51 +08:00
config LCD_TOSA
tristate "Sharp SL-6000 LCD Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SPI && MACH_TOSA
backlight: add support for Sharp SL-6000 LCD and backlight drivers On Sharp SL-6000 lcd/backlight is a bit complex, so add two drivers one for lcd-driving chip, other one for dac regulating the backlight LEDS. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net>
2008-09-14 00:58:51 +08:00
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its LCD.
backlight: Add HP Jornada 700 series LCD driver Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-02-18 19:47:26 +08:00
config LCD_HP700
tristate "HP Jornada 700 series LCD Driver"
depends on SA1100_JORNADA720_SSP && !PREEMPT
default y
help
If you have an HP Jornada 700 series handheld (710/720/728)
say Y to enable LCD control driver.
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
endif # LCD_CLASS_DEVICE
backlight: Fix order of Kconfig entries Switch the order of LCD_CLASS_DEVICE and BACKLIGHT_CLASS_DEVICE, so that it's possible to insert LCD devices without borking the dependency displays of xconfig and other config tools. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-05-30 06:07:10 +08:00
#
# Backlight
#
config BACKLIGHT_CLASS_DEVICE
tristate "Lowlevel Backlight controls"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default m
help
backlight: Fix order of Kconfig entries Switch the order of LCD_CLASS_DEVICE and BACKLIGHT_CLASS_DEVICE, so that it's possible to insert LCD devices without borking the dependency displays of xconfig and other config tools. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-05-30 06:07:10 +08:00
This framework adds support for low-level control of the LCD
backlight. This includes support for brightness and power.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
if BACKLIGHT_CLASS_DEVICE
atmel_lcdfb: backlight control On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from the LCD controller. It's controlled by "contrast" registers though. This patch lets boards declare that they have that kind of backlight control. The driver can then export this control, letting screenblank and other operations actually take effect ... reducing the typically substantial power drain from the backlight. Note that it's not fully cooked - doesn't force backlight off during system suspend - the "power" and "blank" events may not be done right This should be easily added in the future. [nicolas.ferre@atmel.com: remove unneeded inline and rename functions] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 17:39:26 +08:00
config BACKLIGHT_ATMEL_LCDC
bool "Atmel LCDC Contrast-as-Backlight control"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on FB_ATMEL
[ARM] 5614/1: at91: atmel_lcdfb: add at91sam9g10 support to atmel LCD driver Modify atmel LCD driver: atmel_lcdfb for at91sam9g10. This add a clock management equivalent to at91sam9261. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-21 18:31:29 +08:00
default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
atmel_lcdfb: backlight control On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from the LCD controller. It's controlled by "contrast" registers though. This patch lets boards declare that they have that kind of backlight control. The driver can then export this control, letting screenblank and other operations actually take effect ... reducing the typically substantial power drain from the backlight. Note that it's not fully cooked - doesn't force backlight off during system suspend - the "power" and "blank" events may not be done right This should be easily added in the future. [nicolas.ferre@atmel.com: remove unneeded inline and rename functions] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 17:39:26 +08:00
help
This provides a backlight control internal to the Atmel LCDC
driver. If the LCD "contrast control" on your board is wired
so it controls the backlight brightness, select this option to
export this as a PWM-based backlight control.
If in doubt, it's safe to enable this option; it doesn't kick
in unless the board's description says it's wired that way.
fbdev: LCD backlight driver using Atmel PWM driver This patch adds a platform driver using the ATMEL PWM driver to control a backlight which requires a PWM signal and optional GPIO signal for discrete on/off signal. It has been tested on Favr-32 board from EarthLCD. The driver is configurable by supplying a struct with the platform data. See the include/linux/atmel-pwm-bl.h for details. The board code for Favr-32 will be submitted to the AVR32 kernel list. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 12:31:48 +08:00
config BACKLIGHT_ATMEL_PWM
tristate "Atmel PWM backlight control"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on ATMEL_PWM
fbdev: LCD backlight driver using Atmel PWM driver This patch adds a platform driver using the ATMEL PWM driver to control a backlight which requires a PWM signal and optional GPIO signal for discrete on/off signal. It has been tested on Favr-32 board from EarthLCD. The driver is configurable by supplying a struct with the platform data. See the include/linux/atmel-pwm-bl.h for details. The board code for Favr-32 will be submitted to the AVR32 kernel list. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 12:31:48 +08:00
help
Say Y here if you want to use the PWM peripheral in Atmel AT91 and
AVR32 devices. This driver will need additional platform data to know
which PWM instance to use and how to configure it.
To compile this driver as a module, choose M here: the module will be
called atmel-pwm-bl.
backlight: Rename the corgi backlight driver to generic The corgi backlight driver is really generic code. This rename makes this a lot clearer and completes the partial rename made a while ago. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-09 04:52:37 +08:00
config BACKLIGHT_GENERIC
tristate "Generic (aka Sharp Corgi) Backlight Driver"
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
backlight: Convert corgi backlight driver into a more generic driver Convert the corgi backlight driver to a more generic version so it can be reused by other code rather than being Zaurus/PXA specific. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-03 07:27:00 +08:00
Say y to enable the generic platform backlight driver previously
known as the Corgi backlight driver. If you have a Sharp Zaurus
backlight: Rename the corgi backlight driver to generic The corgi backlight driver is really generic code. This rename makes this a lot clearer and completes the partial rename made a while ago. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-09 04:52:37 +08:00
SL-C7xx, SL-Cxx00 or SL-6000x say y.
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21 11:36:19 +08:00
[PATCH] backlight: LOCOMO Backlight Driver updates Add backlight intensity control to the LOCOMO lcd/backlight driver using the backlight class and add basic power management support. This is a reimplementation and improvement of patches by John Lenz and Pavel Machek Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 15:26:27 +08:00
config BACKLIGHT_LOCOMO
tristate "Sharp LOCOMO LCD/Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SHARP_LOCOMO
[PATCH] backlight: LOCOMO Backlight Driver updates Add backlight intensity control to the LOCOMO lcd/backlight driver using the backlight class and add basic power management support. This is a reimplementation and improvement of patches by John Lenz and Pavel Machek Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 15:26:27 +08:00
default y
help
If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
enable the LCD/backlight driver.
backlight: Add OMAP1 PWL backlight driver This adds the OMAP1 PWL-based LCD backlight driver. It's been in the OMAP tree for some time. Note that OMAP2 can do similar things with the generic timers which have PWM outputs. Such timers are more generic than the PWL found on OMAP1 chips, but have a different EMI profile because they aren't driven by a pseudorandom number generator. [akpm@linux-foundation.org: cleanups] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-01-14 07:15:43 +08:00
config BACKLIGHT_OMAP1
tristate "OMAP1 PWL-based LCD Backlight"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on ARCH_OMAP1
backlight: Add OMAP1 PWL backlight driver This adds the OMAP1 PWL-based LCD backlight driver. It's been in the OMAP tree for some time. Note that OMAP2 can do similar things with the generic timers which have PWM outputs. Such timers are more generic than the PWL found on OMAP1 chips, but have a different EMI profile because they aren't driven by a pseudorandom number generator. [akpm@linux-foundation.org: cleanups] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-01-14 07:15:43 +08:00
default y
help
This driver controls the LCD backlight level and power for
the PWL module of OMAP1 processors. Say Y if your board
uses this hardware.
[PATCH] video: hp680 backlight driver This adds support for the hp680 backlight, as found in the hp6xx series of sh devices. Signed-off-by: Andriy Skulysh <askulysh@image.kiev.ua> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:53 +08:00
config BACKLIGHT_HP680
tristate "HP Jornada 680 Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on SH_HP6XX
[PATCH] video: hp680 backlight driver This adds support for the hp680 backlight, as found in the hp6xx series of sh devices. Signed-off-by: Andriy Skulysh <askulysh@image.kiev.ua> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:53 +08:00
default y
help
If you have a HP Jornada 680, say y to enable the
backlight driver.
backlight: Adds HP Jornada 700 series backlight driver Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-02-18 19:50:43 +08:00
config BACKLIGHT_HP700
tristate "HP Jornada 700 series Backlight Driver"
depends on SA1100_JORNADA720_SSP && !PREEMPT
default y
help
If you have an HP Jornada 700 series,
say Y to include backlight control driver.
backlight: Add Frontpath ProGear HX1050+ driver Add control of LCD backlight for Frontpath ProGear HX1050+. Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz driver by M Schacht. Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-08 06:24:01 +08:00
config BACKLIGHT_PROGEAR
tristate "Frontpath ProGear Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on PCI && X86
backlight: Add Frontpath ProGear HX1050+ driver Add control of LCD backlight for Frontpath ProGear HX1050+. Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz driver by M Schacht. Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-08 06:24:01 +08:00
help
If you have a Frontpath ProGear say Y to enable the
backlight driver.
vmlfb: framebuffer driver for Intel Vermilion Range Add the Intel Vermilion Range framebuffer support. Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 15:39:25 +08:00
config BACKLIGHT_CARILLO_RANCH
tristate "Intel Carillo Ranch Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
vmlfb: framebuffer driver for Intel Vermilion Range Add the Intel Vermilion Range framebuffer support. Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 15:39:25 +08:00
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
backlight driver.
[ARM] pxa: add generic PWM backlight driver Patch mostly from Eric Miao, with minor edits by rmk to convert Eric's driver to a generic PWM-based backlight driver. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-14 16:35:08 +08:00
config BACKLIGHT_PWM
tristate "Generic PWM based Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on HAVE_PWM
[ARM] pxa: add generic PWM backlight driver Patch mostly from Eric Miao, with minor edits by rmk to convert Eric's driver to a generic PWM-based backlight driver. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-14 16:35:08 +08:00
help
If you have a LCD backlight adjustable by PWM, say Y to enable
this driver.
backlight: Add Nvidia-based Apple Macbook Pro backlight driver Nvidia-based Apple Macbook Pros don't appear to handle backlight control through the graphics card registers or ACPI, but instead trigger changes via SMI calls. This driver registers a generic backlight device that lets existing userspace deal with it. Code derived from Julien Blache's Pommed application. Signed-off-by: Julien Blache <jb@jblache.org> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-06-10 04:56:16 +08:00
backlight: da903x: Add backlight driver for DA9030/DA9034 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-13 16:03:44 +08:00
config BACKLIGHT_DA903X
tristate "Backlight Driver for DA9030/DA9034 using WLED"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on PMIC_DA903X
backlight: da903x: Add backlight driver for DA9030/DA9034 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-13 16:03:44 +08:00
help
If you have a LCD backlight connected to the WLED output of DA9030
or DA9034 WLED output, say Y here to enable this driver.
backlight: Enable max8925 backlight Enable max8925 backlight sub device. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-18 23:01:45 +08:00
config BACKLIGHT_MAX8925
tristate "Backlight driver for MAX8925"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on MFD_MAX8925
backlight: Enable max8925 backlight Enable max8925 backlight sub device. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-18 23:01:45 +08:00
help
If you have a LCD backlight connected to the WLED output of MAX8925
WLED output, say Y here to enable this driver.
backlight: Add Nvidia-based Apple Macbook Pro backlight driver Nvidia-based Apple Macbook Pros don't appear to handle backlight control through the graphics card registers or ACPI, but instead trigger changes via SMI calls. This driver registers a generic backlight device that lets existing userspace deal with it. Code derived from Julien Blache's Pommed application. Signed-off-by: Julien Blache <jb@jblache.org> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-06-10 04:56:16 +08:00
config BACKLIGHT_MBP_NVIDIA
tristate "MacBook Pro Nvidia Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on X86
backlight: Add Nvidia-based Apple Macbook Pro backlight driver Nvidia-based Apple Macbook Pros don't appear to handle backlight control through the graphics card registers or ACPI, but instead trigger changes via SMI calls. This driver registers a generic backlight device that lets existing userspace deal with it. Code derived from Julien Blache's Pommed application. Signed-off-by: Julien Blache <jb@jblache.org> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-06-10 04:56:16 +08:00
help
If you have an Apple Macbook Pro with Nvidia graphics hardware say Y
to enable a driver for its backlight
backlight: add support for Sharp SL-6000 LCD and backlight drivers On Sharp SL-6000 lcd/backlight is a bit complex, so add two drivers one for lcd-driving chip, other one for dac regulating the backlight LEDS. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net>
2008-09-14 00:58:51 +08:00
config BACKLIGHT_TOSA
tristate "Sharp SL-6000 Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on I2C && MACH_TOSA && LCD_TOSA
backlight: add support for Sharp SL-6000 LCD and backlight drivers On Sharp SL-6000 lcd/backlight is a bit complex, so add two drivers one for lcd-driving chip, other one for dac regulating the backlight LEDS. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net>
2008-09-14 00:58:51 +08:00
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its backlight
backlight: Add driver for Tabletkiosk Sahara TouchIT-213 Tablet PC [akpm@linux-foundation.org: coding-style fixes] [rpurdie@linux.intel.com: minor tweaks] Signed-off-by: Claudio Nieder <private@claudio.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-21 06:35:40 +08:00
config BACKLIGHT_SAHARA
tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on X86
backlight: Add driver for Tabletkiosk Sahara TouchIT-213 Tablet PC [akpm@linux-foundation.org: coding-style fixes] [rpurdie@linux.intel.com: minor tweaks] Signed-off-by: Claudio Nieder <private@claudio.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-21 06:35:40 +08:00
help
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
backlight driver.
backlight: Add WM831x backlight driver The WM831x series of PMICs provide DC-DC boost convertors and current sinks which can be used together to drive LEDs for use as backlights. Expose this functionality via the backlight API. Since when used in this configuration the current sink and boost convertor are very tightly coupled with a multi-stage startup for the current sink which overlaps with the boost convertor startup this driver bypasses the regulator API. Machine inititialisation is responsible for ensuring that the regulators are not accessed via both APIs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-05 21:09:20 +08:00
config BACKLIGHT_WM831X
tristate "WM831x PMIC Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on MFD_WM831X
backlight: Add WM831x backlight driver The WM831x series of PMICs provide DC-DC boost convertors and current sinks which can be used together to drive LEDs for use as backlights. Expose this functionality via the backlight API. Since when used in this configuration the current sink and boost convertor are very tightly coupled with a multi-stage startup for the current sink which overlaps with the boost convertor startup this driver bypasses the regulator API. Machine inititialisation is responsible for ensuring that the regulators are not accessed via both APIs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-05 21:09:20 +08:00
help
If you have a backlight driven by the ISINK and DCDC of a
WM831x PMIC say y to enable the backlight driver for it.
backlight: Add support for the Avionic Design Xanthos backlight device. This patch adds support for the backlight device found on Avionic Design Xanthos-based boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-08-14 21:58:56 +08:00
config BACKLIGHT_ADX
tristate "Avionic Design Xanthos Backlight Driver"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on ARCH_PXA_ADX
backlight: Add support for the Avionic Design Xanthos backlight device. This patch adds support for the backlight device found on Avionic Design Xanthos-based boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-08-14 21:58:56 +08:00
default y
help
Say Y to enable the backlight driver on Avionic Design Xanthos-based
boards.
backlight: new driver for ADP5520/ADP5501 MFD PMICs Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-18 02:29:52 +08:00
config BACKLIGHT_ADP5520
tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on PMIC_ADP5520
backlight: new driver for ADP5520/ADP5501 MFD PMICs Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-18 02:29:52 +08:00
help
If you have a LCD backlight connected to the BST/BL_SNK output of
ADP5520 or ADP5501, say Y here to enable this driver.
To compile this driver as a module, choose M here: the module will
be called adp5520_bl.
backlight: new driver for the ADP8860 backlight parts The ADP8860 combines a programmable backlight LED charge pump driver with automatic phototransistor control. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-01 05:09:51 +08:00
config BACKLIGHT_ADP8860
tristate "Backlight Driver for ADP8860 using WLED"
depends on BACKLIGHT_CLASS_DEVICE && I2C
select NEW_LEDS
select LEDS_CLASS
help
If you have a LCD backlight connected to the ADP8860,
say Y here to enable this driver.
To compile this driver as a module, choose M here: the module will
be called adp8860_bl.
backlight: Enable backlight in 88pm860x At most, three backlight device can be supported in 88pm860x driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-11-10 01:41:07 +08:00
config BACKLIGHT_88PM860X
tristate "Backlight Driver for 88PM8606 using WLED"
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
depends on MFD_88PM860X
backlight: Enable backlight in 88pm860x At most, three backlight device can be supported in 88pm860x driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-11-10 01:41:07 +08:00
help
Say Y to enable the backlight driver for Marvell 88PM8606.
backlight: Kconfig cleanup Cleanup the "depends on" logic by wrapping the affected config options in appropriate if/endif blocks. Remove all the "default n" since that is the default default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-31 02:17:35 +08:00
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT