libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
|
|
|
|
/* Copyright (c) 2021 Facebook */
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <errno.h>
|
|
|
|
#include <linux/filter.h>
|
2021-09-27 22:59:37 +08:00
|
|
|
#include <sys/param.h>
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
#include "btf.h"
|
|
|
|
#include "bpf.h"
|
|
|
|
#include "libbpf.h"
|
|
|
|
#include "libbpf_internal.h"
|
|
|
|
#include "hashmap.h"
|
|
|
|
#include "bpf_gen_internal.h"
|
|
|
|
#include "skel_internal.h"
|
2021-10-28 14:34:56 +08:00
|
|
|
#include <asm/byteorder.h>
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
#define MAX_USED_MAPS 64
|
|
|
|
#define MAX_USED_PROGS 32
|
|
|
|
#define MAX_KFUNC_DESCS 256
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
#define MAX_FD_ARRAY_SZ (MAX_USED_MAPS + MAX_KFUNC_DESCS)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
|
|
|
/* The following structure describes the stack layout of the loader program.
|
|
|
|
* In addition R6 contains the pointer to context.
|
|
|
|
* R7 contains the result of the last sys_bpf command (typically error or FD).
|
|
|
|
* R9 contains the result of the last sys_close command.
|
|
|
|
*
|
|
|
|
* Naming convention:
|
|
|
|
* ctx - bpf program context
|
|
|
|
* stack - bpf program stack
|
|
|
|
* blob - bpf_attr-s, strings, insns, map data.
|
|
|
|
* All the bytes that loader prog will use for read/write.
|
|
|
|
*/
|
|
|
|
struct loader_stack {
|
|
|
|
__u32 btf_fd;
|
|
|
|
__u32 inner_map_fd;
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
__u32 prog_fd[MAX_USED_PROGS];
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define stack_off(field) \
|
|
|
|
(__s16)(-sizeof(struct loader_stack) + offsetof(struct loader_stack, field))
|
|
|
|
|
|
|
|
#define attr_field(attr, field) (attr + offsetof(union bpf_attr, field))
|
|
|
|
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
static int blob_fd_array_off(struct bpf_gen *gen, int index)
|
|
|
|
{
|
|
|
|
return gen->fd_array + index * sizeof(int);
|
|
|
|
}
|
|
|
|
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
static int realloc_insn_buf(struct bpf_gen *gen, __u32 size)
|
|
|
|
{
|
|
|
|
size_t off = gen->insn_cur - gen->insn_start;
|
|
|
|
void *insn_start;
|
|
|
|
|
|
|
|
if (gen->error)
|
|
|
|
return gen->error;
|
|
|
|
if (size > INT32_MAX || off + size > INT32_MAX) {
|
|
|
|
gen->error = -ERANGE;
|
|
|
|
return -ERANGE;
|
|
|
|
}
|
|
|
|
insn_start = realloc(gen->insn_start, off + size);
|
|
|
|
if (!insn_start) {
|
|
|
|
gen->error = -ENOMEM;
|
|
|
|
free(gen->insn_start);
|
|
|
|
gen->insn_start = NULL;
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
gen->insn_start = insn_start;
|
|
|
|
gen->insn_cur = insn_start + off;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int realloc_data_buf(struct bpf_gen *gen, __u32 size)
|
|
|
|
{
|
|
|
|
size_t off = gen->data_cur - gen->data_start;
|
|
|
|
void *data_start;
|
|
|
|
|
|
|
|
if (gen->error)
|
|
|
|
return gen->error;
|
|
|
|
if (size > INT32_MAX || off + size > INT32_MAX) {
|
|
|
|
gen->error = -ERANGE;
|
|
|
|
return -ERANGE;
|
|
|
|
}
|
|
|
|
data_start = realloc(gen->data_start, off + size);
|
|
|
|
if (!data_start) {
|
|
|
|
gen->error = -ENOMEM;
|
|
|
|
free(gen->data_start);
|
|
|
|
gen->data_start = NULL;
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
gen->data_start = data_start;
|
|
|
|
gen->data_cur = data_start + off;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emit(struct bpf_gen *gen, struct bpf_insn insn)
|
|
|
|
{
|
|
|
|
if (realloc_insn_buf(gen, sizeof(insn)))
|
|
|
|
return;
|
|
|
|
memcpy(gen->insn_cur, &insn, sizeof(insn));
|
|
|
|
gen->insn_cur += sizeof(insn);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emit2(struct bpf_gen *gen, struct bpf_insn insn1, struct bpf_insn insn2)
|
|
|
|
{
|
|
|
|
emit(gen, insn1);
|
|
|
|
emit(gen, insn2);
|
|
|
|
}
|
|
|
|
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
static int add_data(struct bpf_gen *gen, const void *data, __u32 size);
|
|
|
|
static void emit_sys_close_blob(struct bpf_gen *gen, int blob_off);
|
|
|
|
|
|
|
|
void bpf_gen__init(struct bpf_gen *gen, int log_level, int nr_progs, int nr_maps)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
{
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
size_t stack_sz = sizeof(struct loader_stack), nr_progs_sz;
|
2021-05-14 08:36:17 +08:00
|
|
|
int i;
|
|
|
|
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
gen->fd_array = add_data(gen, NULL, MAX_FD_ARRAY_SZ * sizeof(int));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
gen->log_level = log_level;
|
2021-05-14 08:36:17 +08:00
|
|
|
/* save ctx pointer into R6 */
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_6, BPF_REG_1));
|
2021-05-14 08:36:17 +08:00
|
|
|
|
|
|
|
/* bzero stack */
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_1, BPF_REG_10));
|
|
|
|
emit(gen, BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -stack_sz));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_2, stack_sz));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_3, 0));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_probe_read_kernel));
|
|
|
|
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
/* amount of stack actually used, only used to calculate iterations, not stack offset */
|
|
|
|
nr_progs_sz = offsetof(struct loader_stack, prog_fd[nr_progs]);
|
2021-05-14 08:36:17 +08:00
|
|
|
/* jump over cleanup code */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JA, 0, 0,
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
/* size of cleanup code below (including map fd cleanup) */
|
|
|
|
(nr_progs_sz / 4) * 3 + 2 +
|
|
|
|
/* 6 insns for emit_sys_close_blob,
|
|
|
|
* 6 insns for debug_regs in emit_sys_close_blob
|
|
|
|
*/
|
|
|
|
nr_maps * (6 + (gen->log_level ? 6 : 0))));
|
2021-05-14 08:36:17 +08:00
|
|
|
|
|
|
|
/* remember the label where all error branches will jump to */
|
|
|
|
gen->cleanup_label = gen->insn_cur - gen->insn_start;
|
|
|
|
/* emit cleanup code: close all temp FDs */
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
for (i = 0; i < nr_progs_sz; i += 4) {
|
2021-05-14 08:36:17 +08:00
|
|
|
emit(gen, BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_10, -stack_sz + i));
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JSLE, BPF_REG_1, 0, 1));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_sys_close));
|
|
|
|
}
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
for (i = 0; i < nr_maps; i++)
|
|
|
|
emit_sys_close_blob(gen, blob_fd_array_off(gen, i));
|
2021-05-14 08:36:17 +08:00
|
|
|
/* R7 contains the error code from sys_bpf. Copy it into R0 and exit. */
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_0, BPF_REG_7));
|
|
|
|
emit(gen, BPF_EXIT_INSN());
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int add_data(struct bpf_gen *gen, const void *data, __u32 size)
|
|
|
|
{
|
2021-09-27 22:59:37 +08:00
|
|
|
__u32 size8 = roundup(size, 8);
|
|
|
|
__u64 zero = 0;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
void *prev;
|
|
|
|
|
2021-09-27 22:59:37 +08:00
|
|
|
if (realloc_data_buf(gen, size8))
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
return 0;
|
|
|
|
prev = gen->data_cur;
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
if (data) {
|
|
|
|
memcpy(gen->data_cur, data, size);
|
|
|
|
memcpy(gen->data_cur + size, &zero, size8 - size);
|
|
|
|
} else {
|
|
|
|
memset(gen->data_cur, 0, size8);
|
|
|
|
}
|
|
|
|
gen->data_cur += size8;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
return prev - gen->data_start;
|
|
|
|
}
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* Get index for map_fd/btf_fd slot in reserved fd_array, or in data relative
|
|
|
|
* to start of fd_array. Caller can decide if it is usable or not.
|
|
|
|
*/
|
|
|
|
static int add_map_fd(struct bpf_gen *gen)
|
|
|
|
{
|
|
|
|
if (gen->nr_maps == MAX_USED_MAPS) {
|
|
|
|
pr_warn("Total maps exceeds %d\n", MAX_USED_MAPS);
|
|
|
|
gen->error = -E2BIG;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
return gen->nr_maps++;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int add_kfunc_btf_fd(struct bpf_gen *gen)
|
|
|
|
{
|
|
|
|
int cur;
|
|
|
|
|
|
|
|
if (gen->nr_fd_array == MAX_KFUNC_DESCS) {
|
|
|
|
cur = add_data(gen, NULL, sizeof(int));
|
|
|
|
return (cur - gen->fd_array) / sizeof(int);
|
|
|
|
}
|
|
|
|
return MAX_USED_MAPS + gen->nr_fd_array++;
|
|
|
|
}
|
|
|
|
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
static int insn_bytes_to_bpf_size(__u32 sz)
|
|
|
|
{
|
|
|
|
switch (sz) {
|
|
|
|
case 8: return BPF_DW;
|
|
|
|
case 4: return BPF_W;
|
|
|
|
case 2: return BPF_H;
|
|
|
|
case 1: return BPF_B;
|
|
|
|
default: return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* *(u64 *)(blob + off) = (u64)(void *)(blob + data) */
|
|
|
|
static void emit_rel_store(struct bpf_gen *gen, int off, int data)
|
|
|
|
{
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_0, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, data));
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, off));
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, 0));
|
|
|
|
}
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
static void move_blob2blob(struct bpf_gen *gen, int off, int size, int blob_off)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
{
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_2, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, blob_off));
|
|
|
|
emit(gen, BPF_LDX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_0, BPF_REG_2, 0));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, off));
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
emit(gen, BPF_STX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_1, BPF_REG_0, 0));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void move_blob2ctx(struct bpf_gen *gen, int ctx_off, int size, int blob_off)
|
|
|
|
{
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, blob_off));
|
|
|
|
emit(gen, BPF_LDX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_0, BPF_REG_1, 0));
|
|
|
|
emit(gen, BPF_STX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_6, BPF_REG_0, ctx_off));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void move_ctx2blob(struct bpf_gen *gen, int off, int size, int ctx_off,
|
|
|
|
bool check_non_zero)
|
|
|
|
{
|
|
|
|
emit(gen, BPF_LDX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_0, BPF_REG_6, ctx_off));
|
|
|
|
if (check_non_zero)
|
|
|
|
/* If value in ctx is zero don't update the blob.
|
|
|
|
* For example: when ctx->map.max_entries == 0, keep default max_entries from bpf.c
|
|
|
|
*/
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 3));
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, off));
|
|
|
|
emit(gen, BPF_STX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_1, BPF_REG_0, 0));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void move_stack2blob(struct bpf_gen *gen, int off, int size, int stack_off)
|
|
|
|
{
|
|
|
|
emit(gen, BPF_LDX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_0, BPF_REG_10, stack_off));
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, off));
|
|
|
|
emit(gen, BPF_STX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_1, BPF_REG_0, 0));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void move_stack2ctx(struct bpf_gen *gen, int ctx_off, int size, int stack_off)
|
|
|
|
{
|
|
|
|
emit(gen, BPF_LDX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_0, BPF_REG_10, stack_off));
|
|
|
|
emit(gen, BPF_STX_MEM(insn_bytes_to_bpf_size(size), BPF_REG_6, BPF_REG_0, ctx_off));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emit_sys_bpf(struct bpf_gen *gen, int cmd, int attr, int attr_size)
|
|
|
|
{
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_1, cmd));
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_2, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, attr));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_3, attr_size));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_sys_bpf));
|
|
|
|
/* remember the result in R7 */
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_7, BPF_REG_0));
|
|
|
|
}
|
|
|
|
|
2021-05-14 08:36:17 +08:00
|
|
|
static bool is_simm16(__s64 value)
|
|
|
|
{
|
|
|
|
return value == (__s64)(__s16)value;
|
|
|
|
}
|
|
|
|
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
static void emit_check_err(struct bpf_gen *gen)
|
|
|
|
{
|
2021-05-14 08:36:17 +08:00
|
|
|
__s64 off = -(gen->insn_cur - gen->insn_start - gen->cleanup_label) / 8 - 1;
|
|
|
|
|
|
|
|
/* R7 contains result of last sys_bpf command.
|
|
|
|
* if (R7 < 0) goto cleanup;
|
|
|
|
*/
|
|
|
|
if (is_simm16(off)) {
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JSLT, BPF_REG_7, 0, off));
|
|
|
|
} else {
|
|
|
|
gen->error = -ERANGE;
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JA, 0, 0, -1));
|
|
|
|
}
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* reg1 and reg2 should not be R1 - R5. They can be R0, R6 - R10 */
|
|
|
|
static void emit_debug(struct bpf_gen *gen, int reg1, int reg2,
|
|
|
|
const char *fmt, va_list args)
|
|
|
|
{
|
|
|
|
char buf[1024];
|
|
|
|
int addr, len, ret;
|
|
|
|
|
|
|
|
if (!gen->log_level)
|
|
|
|
return;
|
|
|
|
ret = vsnprintf(buf, sizeof(buf), fmt, args);
|
|
|
|
if (ret < 1024 - 7 && reg1 >= 0 && reg2 < 0)
|
|
|
|
/* The special case to accommodate common debug_ret():
|
|
|
|
* to avoid specifying BPF_REG_7 and adding " r=%%d" to
|
|
|
|
* prints explicitly.
|
|
|
|
*/
|
|
|
|
strcat(buf, " r=%d");
|
|
|
|
len = strlen(buf) + 1;
|
|
|
|
addr = add_data(gen, buf, len);
|
|
|
|
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, addr));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_2, len));
|
|
|
|
if (reg1 >= 0)
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_3, reg1));
|
|
|
|
if (reg2 >= 0)
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_4, reg2));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_trace_printk));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void debug_regs(struct bpf_gen *gen, int reg1, int reg2, const char *fmt, ...)
|
|
|
|
{
|
|
|
|
va_list args;
|
|
|
|
|
|
|
|
va_start(args, fmt);
|
|
|
|
emit_debug(gen, reg1, reg2, fmt, args);
|
|
|
|
va_end(args);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void debug_ret(struct bpf_gen *gen, const char *fmt, ...)
|
|
|
|
{
|
|
|
|
va_list args;
|
|
|
|
|
|
|
|
va_start(args, fmt);
|
|
|
|
emit_debug(gen, BPF_REG_7, -1, fmt, args);
|
|
|
|
va_end(args);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __emit_sys_close(struct bpf_gen *gen)
|
|
|
|
{
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JSLE, BPF_REG_1, 0,
|
|
|
|
/* 2 is the number of the following insns
|
|
|
|
* * 6 is additional insns in debug_regs
|
|
|
|
*/
|
|
|
|
2 + (gen->log_level ? 6 : 0)));
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_9, BPF_REG_1));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_sys_close));
|
|
|
|
debug_regs(gen, BPF_REG_9, BPF_REG_0, "close(%%d) = %%d");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emit_sys_close_stack(struct bpf_gen *gen, int stack_off)
|
|
|
|
{
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_10, stack_off));
|
|
|
|
__emit_sys_close(gen);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emit_sys_close_blob(struct bpf_gen *gen, int blob_off)
|
|
|
|
{
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_0, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, blob_off));
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 0));
|
|
|
|
__emit_sys_close(gen);
|
|
|
|
}
|
|
|
|
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
int bpf_gen__finish(struct bpf_gen *gen, int nr_progs, int nr_maps)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
2021-12-12 09:16:19 +08:00
|
|
|
if (nr_progs < gen->nr_progs || nr_maps != gen->nr_maps) {
|
|
|
|
pr_warn("nr_progs %d/%d nr_maps %d/%d mismatch\n",
|
|
|
|
nr_progs, gen->nr_progs, nr_maps, gen->nr_maps);
|
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
2021-11-13 07:20:22 +08:00
|
|
|
gen->error = -EFAULT;
|
|
|
|
return gen->error;
|
|
|
|
}
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit_sys_close_stack(gen, stack_off(btf_fd));
|
|
|
|
for (i = 0; i < gen->nr_progs; i++)
|
|
|
|
move_stack2ctx(gen,
|
|
|
|
sizeof(struct bpf_loader_ctx) +
|
|
|
|
sizeof(struct bpf_map_desc) * gen->nr_maps +
|
|
|
|
sizeof(struct bpf_prog_desc) * i +
|
|
|
|
offsetof(struct bpf_prog_desc, prog_fd), 4,
|
|
|
|
stack_off(prog_fd[i]));
|
|
|
|
for (i = 0; i < gen->nr_maps; i++)
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
move_blob2ctx(gen,
|
|
|
|
sizeof(struct bpf_loader_ctx) +
|
|
|
|
sizeof(struct bpf_map_desc) * i +
|
|
|
|
offsetof(struct bpf_map_desc, map_fd), 4,
|
|
|
|
blob_fd_array_off(gen, i));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_0, 0));
|
|
|
|
emit(gen, BPF_EXIT_INSN());
|
|
|
|
pr_debug("gen: finish %d\n", gen->error);
|
|
|
|
if (!gen->error) {
|
|
|
|
struct gen_loader_opts *opts = gen->opts;
|
|
|
|
|
|
|
|
opts->insns = gen->insn_start;
|
|
|
|
opts->insns_sz = gen->insn_cur - gen->insn_start;
|
|
|
|
opts->data = gen->data_start;
|
|
|
|
opts->data_sz = gen->data_cur - gen->data_start;
|
|
|
|
}
|
|
|
|
return gen->error;
|
|
|
|
}
|
|
|
|
|
|
|
|
void bpf_gen__free(struct bpf_gen *gen)
|
|
|
|
{
|
|
|
|
if (!gen)
|
|
|
|
return;
|
|
|
|
free(gen->data_start);
|
|
|
|
free(gen->insn_start);
|
|
|
|
free(gen);
|
|
|
|
}
|
|
|
|
|
|
|
|
void bpf_gen__load_btf(struct bpf_gen *gen, const void *btf_raw_data,
|
|
|
|
__u32 btf_raw_size)
|
|
|
|
{
|
|
|
|
int attr_size = offsetofend(union bpf_attr, btf_log_level);
|
|
|
|
int btf_data, btf_load_attr;
|
|
|
|
union bpf_attr attr;
|
|
|
|
|
|
|
|
memset(&attr, 0, attr_size);
|
|
|
|
pr_debug("gen: load_btf: size %d\n", btf_raw_size);
|
|
|
|
btf_data = add_data(gen, btf_raw_data, btf_raw_size);
|
|
|
|
|
|
|
|
attr.btf_size = btf_raw_size;
|
|
|
|
btf_load_attr = add_data(gen, &attr, attr_size);
|
|
|
|
|
|
|
|
/* populate union bpf_attr with user provided log details */
|
|
|
|
move_ctx2blob(gen, attr_field(btf_load_attr, btf_log_level), 4,
|
|
|
|
offsetof(struct bpf_loader_ctx, log_level), false);
|
|
|
|
move_ctx2blob(gen, attr_field(btf_load_attr, btf_log_size), 4,
|
|
|
|
offsetof(struct bpf_loader_ctx, log_size), false);
|
|
|
|
move_ctx2blob(gen, attr_field(btf_load_attr, btf_log_buf), 8,
|
|
|
|
offsetof(struct bpf_loader_ctx, log_buf), false);
|
|
|
|
/* populate union bpf_attr with a pointer to the BTF data */
|
|
|
|
emit_rel_store(gen, attr_field(btf_load_attr, btf), btf_data);
|
|
|
|
/* emit BTF_LOAD command */
|
|
|
|
emit_sys_bpf(gen, BPF_BTF_LOAD, btf_load_attr, attr_size);
|
|
|
|
debug_ret(gen, "btf_load size %d", btf_raw_size);
|
|
|
|
emit_check_err(gen);
|
|
|
|
/* remember btf_fd in the stack, if successful */
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_7, stack_off(btf_fd)));
|
|
|
|
}
|
|
|
|
|
|
|
|
void bpf_gen__map_create(struct bpf_gen *gen,
|
2021-11-25 03:32:30 +08:00
|
|
|
enum bpf_map_type map_type,
|
|
|
|
const char *map_name,
|
|
|
|
__u32 key_size, __u32 value_size, __u32 max_entries,
|
|
|
|
struct bpf_map_create_opts *map_attr, int map_idx)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
{
|
2021-11-25 03:32:30 +08:00
|
|
|
int attr_size = offsetofend(union bpf_attr, map_extra);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
bool close_inner_map_fd = false;
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
int map_create_attr, idx;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
union bpf_attr attr;
|
|
|
|
|
|
|
|
memset(&attr, 0, attr_size);
|
2021-11-25 03:32:30 +08:00
|
|
|
attr.map_type = map_type;
|
|
|
|
attr.key_size = key_size;
|
|
|
|
attr.value_size = value_size;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
attr.map_flags = map_attr->map_flags;
|
2021-10-28 07:45:01 +08:00
|
|
|
attr.map_extra = map_attr->map_extra;
|
2021-11-25 03:32:30 +08:00
|
|
|
if (map_name)
|
|
|
|
memcpy(attr.map_name, map_name,
|
|
|
|
min((unsigned)strlen(map_name), BPF_OBJ_NAME_LEN - 1));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
attr.numa_node = map_attr->numa_node;
|
|
|
|
attr.map_ifindex = map_attr->map_ifindex;
|
2021-11-25 03:32:30 +08:00
|
|
|
attr.max_entries = max_entries;
|
|
|
|
attr.btf_key_type_id = map_attr->btf_key_type_id;
|
|
|
|
attr.btf_value_type_id = map_attr->btf_value_type_id;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
|
|
|
pr_debug("gen: map_create: %s idx %d type %d value_type_id %d\n",
|
2021-11-25 03:32:30 +08:00
|
|
|
attr.map_name, map_idx, map_type, attr.btf_value_type_id);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
|
|
|
map_create_attr = add_data(gen, &attr, attr_size);
|
|
|
|
if (attr.btf_value_type_id)
|
|
|
|
/* populate union bpf_attr with btf_fd saved in the stack earlier */
|
|
|
|
move_stack2blob(gen, attr_field(map_create_attr, btf_fd), 4,
|
|
|
|
stack_off(btf_fd));
|
|
|
|
switch (attr.map_type) {
|
|
|
|
case BPF_MAP_TYPE_ARRAY_OF_MAPS:
|
|
|
|
case BPF_MAP_TYPE_HASH_OF_MAPS:
|
|
|
|
move_stack2blob(gen, attr_field(map_create_attr, inner_map_fd), 4,
|
|
|
|
stack_off(inner_map_fd));
|
|
|
|
close_inner_map_fd = true;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/* conditionally update max_entries */
|
|
|
|
if (map_idx >= 0)
|
|
|
|
move_ctx2blob(gen, attr_field(map_create_attr, max_entries), 4,
|
|
|
|
sizeof(struct bpf_loader_ctx) +
|
|
|
|
sizeof(struct bpf_map_desc) * map_idx +
|
|
|
|
offsetof(struct bpf_map_desc, max_entries),
|
|
|
|
true /* check that max_entries != 0 */);
|
|
|
|
/* emit MAP_CREATE command */
|
|
|
|
emit_sys_bpf(gen, BPF_MAP_CREATE, map_create_attr, attr_size);
|
|
|
|
debug_ret(gen, "map_create %s idx %d type %d value_size %d value_btf_id %d",
|
2021-11-25 03:32:30 +08:00
|
|
|
attr.map_name, map_idx, map_type, value_size,
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
attr.btf_value_type_id);
|
|
|
|
emit_check_err(gen);
|
|
|
|
/* remember map_fd in the stack, if successful */
|
|
|
|
if (map_idx < 0) {
|
|
|
|
/* This bpf_gen__map_create() function is called with map_idx >= 0
|
|
|
|
* for all maps that libbpf loading logic tracks.
|
|
|
|
* It's called with -1 to create an inner map.
|
|
|
|
*/
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_7,
|
|
|
|
stack_off(inner_map_fd)));
|
|
|
|
} else if (map_idx != gen->nr_maps) {
|
|
|
|
gen->error = -EDOM; /* internal bug */
|
|
|
|
return;
|
|
|
|
} else {
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* add_map_fd does gen->nr_maps++ */
|
|
|
|
idx = add_map_fd(gen);
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, blob_fd_array_off(gen, idx)));
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_1, BPF_REG_7, 0));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
}
|
|
|
|
if (close_inner_map_fd)
|
|
|
|
emit_sys_close_stack(gen, stack_off(inner_map_fd));
|
|
|
|
}
|
|
|
|
|
|
|
|
void bpf_gen__record_attach_target(struct bpf_gen *gen, const char *attach_name,
|
|
|
|
enum bpf_attach_type type)
|
|
|
|
{
|
|
|
|
const char *prefix;
|
|
|
|
int kind, ret;
|
|
|
|
|
|
|
|
btf_get_kernel_prefix_kind(type, &prefix, &kind);
|
|
|
|
gen->attach_kind = kind;
|
|
|
|
ret = snprintf(gen->attach_target, sizeof(gen->attach_target), "%s%s",
|
|
|
|
prefix, attach_name);
|
|
|
|
if (ret == sizeof(gen->attach_target))
|
|
|
|
gen->error = -ENOSPC;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emit_find_attach_target(struct bpf_gen *gen)
|
|
|
|
{
|
|
|
|
int name, len = strlen(gen->attach_target) + 1;
|
|
|
|
|
|
|
|
pr_debug("gen: find_attach_tgt %s %d\n", gen->attach_target, gen->attach_kind);
|
|
|
|
name = add_data(gen, gen->attach_target, len);
|
|
|
|
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, name));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_2, len));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_3, gen->attach_kind));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_4, 0));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_btf_find_by_name_kind));
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_7, BPF_REG_0));
|
|
|
|
debug_ret(gen, "find_by_name_kind(%s,%d)",
|
|
|
|
gen->attach_target, gen->attach_kind);
|
|
|
|
emit_check_err(gen);
|
|
|
|
/* if successful, btf_id is in lower 32-bit of R7 and
|
|
|
|
* btf_obj_fd is in upper 32-bit
|
|
|
|
*/
|
|
|
|
}
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
void bpf_gen__record_extern(struct bpf_gen *gen, const char *name, bool is_weak,
|
2021-10-28 14:34:55 +08:00
|
|
|
bool is_typeless, int kind, int insn_idx)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
{
|
|
|
|
struct ksym_relo_desc *relo;
|
|
|
|
|
|
|
|
relo = libbpf_reallocarray(gen->relos, gen->relo_cnt + 1, sizeof(*relo));
|
|
|
|
if (!relo) {
|
|
|
|
gen->error = -ENOMEM;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
gen->relos = relo;
|
|
|
|
relo += gen->relo_cnt;
|
|
|
|
relo->name = name;
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
relo->is_weak = is_weak;
|
2021-10-28 14:34:55 +08:00
|
|
|
relo->is_typeless = is_typeless;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
relo->kind = kind;
|
|
|
|
relo->insn_idx = insn_idx;
|
|
|
|
gen->relo_cnt++;
|
|
|
|
}
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* returns existing ksym_desc with ref incremented, or inserts a new one */
|
|
|
|
static struct ksym_desc *get_ksym_desc(struct bpf_gen *gen, struct ksym_relo_desc *relo)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
{
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
struct ksym_desc *kdesc;
|
2021-11-06 03:10:55 +08:00
|
|
|
int i;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
2021-11-06 03:10:55 +08:00
|
|
|
for (i = 0; i < gen->nr_ksyms; i++) {
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
if (!strcmp(gen->ksyms[i].name, relo->name)) {
|
|
|
|
gen->ksyms[i].ref++;
|
|
|
|
return &gen->ksyms[i];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
kdesc = libbpf_reallocarray(gen->ksyms, gen->nr_ksyms + 1, sizeof(*kdesc));
|
|
|
|
if (!kdesc) {
|
|
|
|
gen->error = -ENOMEM;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
gen->ksyms = kdesc;
|
|
|
|
kdesc = &gen->ksyms[gen->nr_ksyms++];
|
|
|
|
kdesc->name = relo->name;
|
|
|
|
kdesc->kind = relo->kind;
|
|
|
|
kdesc->ref = 1;
|
|
|
|
kdesc->off = 0;
|
|
|
|
kdesc->insn = 0;
|
|
|
|
return kdesc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Overwrites BPF_REG_{0, 1, 2, 3, 4, 7}
|
|
|
|
* Returns result in BPF_REG_7
|
|
|
|
*/
|
|
|
|
static void emit_bpf_find_by_name_kind(struct bpf_gen *gen, struct ksym_relo_desc *relo)
|
|
|
|
{
|
|
|
|
int name_off, len = strlen(relo->name) + 1;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
name_off = add_data(gen, relo->name, len);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
0, 0, 0, name_off));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_2, len));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_3, relo->kind));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_4, 0));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_btf_find_by_name_kind));
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_7, BPF_REG_0));
|
|
|
|
debug_ret(gen, "find_by_name_kind(%s,%d)", relo->name, relo->kind);
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
}
|
|
|
|
|
2021-10-28 14:34:55 +08:00
|
|
|
/* Overwrites BPF_REG_{0, 1, 2, 3, 4, 7}
|
|
|
|
* Returns result in BPF_REG_7
|
|
|
|
* Returns u64 symbol addr in BPF_REG_9
|
|
|
|
*/
|
|
|
|
static void emit_bpf_kallsyms_lookup_name(struct bpf_gen *gen, struct ksym_relo_desc *relo)
|
|
|
|
{
|
|
|
|
int name_off, len = strlen(relo->name) + 1, res_off;
|
|
|
|
|
|
|
|
name_off = add_data(gen, relo->name, len);
|
|
|
|
res_off = add_data(gen, NULL, 8); /* res is u64 */
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, name_off));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_2, len));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_3, 0));
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_4, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, res_off));
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_7, BPF_REG_4));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_kallsyms_lookup_name));
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0));
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_7, BPF_REG_0));
|
|
|
|
debug_ret(gen, "kallsyms_lookup_name(%s,%d)", relo->name, relo->kind);
|
|
|
|
}
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* Expects:
|
|
|
|
* BPF_REG_8 - pointer to instruction
|
|
|
|
*
|
|
|
|
* We need to reuse BTF fd for same symbol otherwise each relocation takes a new
|
|
|
|
* index, while kernel limits total kfunc BTFs to 256. For duplicate symbols,
|
|
|
|
* this would mean a new BTF fd index for each entry. By pairing symbol name
|
|
|
|
* with index, we get the insn->imm, insn->off pairing that kernel uses for
|
|
|
|
* kfunc_tab, which becomes the effective limit even though all of them may
|
|
|
|
* share same index in fd_array (such that kfunc_btf_tab has 1 element).
|
|
|
|
*/
|
|
|
|
static void emit_relo_kfunc_btf(struct bpf_gen *gen, struct ksym_relo_desc *relo, int insn)
|
|
|
|
{
|
|
|
|
struct ksym_desc *kdesc;
|
|
|
|
int btf_fd_idx;
|
|
|
|
|
|
|
|
kdesc = get_ksym_desc(gen, relo);
|
|
|
|
if (!kdesc)
|
|
|
|
return;
|
|
|
|
/* try to copy from existing bpf_insn */
|
|
|
|
if (kdesc->ref > 1) {
|
|
|
|
move_blob2blob(gen, insn + offsetof(struct bpf_insn, imm), 4,
|
|
|
|
kdesc->insn + offsetof(struct bpf_insn, imm));
|
|
|
|
move_blob2blob(gen, insn + offsetof(struct bpf_insn, off), 2,
|
|
|
|
kdesc->insn + offsetof(struct bpf_insn, off));
|
|
|
|
goto log;
|
|
|
|
}
|
|
|
|
/* remember insn offset, so we can copy BTF ID and FD later */
|
|
|
|
kdesc->insn = insn;
|
|
|
|
emit_bpf_find_by_name_kind(gen, relo);
|
|
|
|
if (!relo->is_weak)
|
|
|
|
emit_check_err(gen);
|
|
|
|
/* get index in fd_array to store BTF FD at */
|
|
|
|
btf_fd_idx = add_kfunc_btf_fd(gen);
|
|
|
|
if (btf_fd_idx > INT16_MAX) {
|
|
|
|
pr_warn("BTF fd off %d for kfunc %s exceeds INT16_MAX, cannot process relocation\n",
|
|
|
|
btf_fd_idx, relo->name);
|
|
|
|
gen->error = -E2BIG;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
kdesc->off = btf_fd_idx;
|
2021-11-23 07:57:32 +08:00
|
|
|
/* jump to success case */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JSGE, BPF_REG_7, 0, 3));
|
|
|
|
/* set value for imm, off as 0 */
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
emit(gen, BPF_ST_MEM(BPF_W, BPF_REG_8, offsetof(struct bpf_insn, imm), 0));
|
2021-11-23 07:57:32 +08:00
|
|
|
emit(gen, BPF_ST_MEM(BPF_H, BPF_REG_8, offsetof(struct bpf_insn, off), 0));
|
|
|
|
/* skip success case for ret < 0 */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JA, 0, 0, 10));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
/* store btf_id into insn[insn_idx].imm */
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_8, BPF_REG_7, offsetof(struct bpf_insn, imm)));
|
2021-11-23 07:57:32 +08:00
|
|
|
/* obtain fd in BPF_REG_9 */
|
|
|
|
emit(gen, BPF_MOV64_REG(BPF_REG_9, BPF_REG_7));
|
|
|
|
emit(gen, BPF_ALU64_IMM(BPF_RSH, BPF_REG_9, 32));
|
|
|
|
/* jump to fd_array store if fd denotes module BTF */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 0, 2));
|
|
|
|
/* set the default value for off */
|
|
|
|
emit(gen, BPF_ST_MEM(BPF_H, BPF_REG_8, offsetof(struct bpf_insn, off), 0));
|
|
|
|
/* skip BTF fd store for vmlinux BTF */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JA, 0, 0, 4));
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* load fd_array slot pointer */
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_0, BPF_PSEUDO_MAP_IDX_VALUE,
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
0, 0, 0, blob_fd_array_off(gen, btf_fd_idx)));
|
|
|
|
/* store BTF fd in slot */
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_0, BPF_REG_9, 0));
|
|
|
|
/* store index into insn[insn_idx].off */
|
|
|
|
emit(gen, BPF_ST_MEM(BPF_H, BPF_REG_8, offsetof(struct bpf_insn, off), btf_fd_idx));
|
|
|
|
log:
|
|
|
|
if (!gen->log_level)
|
|
|
|
return;
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_8,
|
|
|
|
offsetof(struct bpf_insn, imm)));
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_H, BPF_REG_9, BPF_REG_8,
|
|
|
|
offsetof(struct bpf_insn, off)));
|
|
|
|
debug_regs(gen, BPF_REG_7, BPF_REG_9, " func (%s:count=%d): imm: %%d, off: %%d",
|
|
|
|
relo->name, kdesc->ref);
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_0, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, blob_fd_array_off(gen, kdesc->off)));
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_W, BPF_REG_9, BPF_REG_0, 0));
|
|
|
|
debug_regs(gen, BPF_REG_9, -1, " func (%s:count=%d): btf_fd",
|
|
|
|
relo->name, kdesc->ref);
|
|
|
|
}
|
|
|
|
|
2021-10-28 14:34:55 +08:00
|
|
|
static void emit_ksym_relo_log(struct bpf_gen *gen, struct ksym_relo_desc *relo,
|
|
|
|
int ref)
|
|
|
|
{
|
|
|
|
if (!gen->log_level)
|
|
|
|
return;
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_8,
|
|
|
|
offsetof(struct bpf_insn, imm)));
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_H, BPF_REG_9, BPF_REG_8, sizeof(struct bpf_insn) +
|
|
|
|
offsetof(struct bpf_insn, imm)));
|
|
|
|
debug_regs(gen, BPF_REG_7, BPF_REG_9, " var t=%d w=%d (%s:count=%d): imm[0]: %%d, imm[1]: %%d",
|
|
|
|
relo->is_typeless, relo->is_weak, relo->name, ref);
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_B, BPF_REG_9, BPF_REG_8, offsetofend(struct bpf_insn, code)));
|
|
|
|
debug_regs(gen, BPF_REG_9, -1, " var t=%d w=%d (%s:count=%d): insn.reg",
|
|
|
|
relo->is_typeless, relo->is_weak, relo->name, ref);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Expects:
|
|
|
|
* BPF_REG_8 - pointer to instruction
|
|
|
|
*/
|
|
|
|
static void emit_relo_ksym_typeless(struct bpf_gen *gen,
|
|
|
|
struct ksym_relo_desc *relo, int insn)
|
|
|
|
{
|
|
|
|
struct ksym_desc *kdesc;
|
|
|
|
|
|
|
|
kdesc = get_ksym_desc(gen, relo);
|
|
|
|
if (!kdesc)
|
|
|
|
return;
|
|
|
|
/* try to copy from existing ldimm64 insn */
|
|
|
|
if (kdesc->ref > 1) {
|
|
|
|
move_blob2blob(gen, insn + offsetof(struct bpf_insn, imm), 4,
|
|
|
|
kdesc->insn + offsetof(struct bpf_insn, imm));
|
|
|
|
move_blob2blob(gen, insn + sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm), 4,
|
|
|
|
kdesc->insn + sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm));
|
|
|
|
goto log;
|
|
|
|
}
|
|
|
|
/* remember insn offset, so we can copy ksym addr later */
|
|
|
|
kdesc->insn = insn;
|
|
|
|
/* skip typeless ksym_desc in fd closing loop in cleanup_relos */
|
|
|
|
kdesc->typeless = true;
|
|
|
|
emit_bpf_kallsyms_lookup_name(gen, relo);
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JEQ, BPF_REG_7, -ENOENT, 1));
|
|
|
|
emit_check_err(gen);
|
|
|
|
/* store lower half of addr into insn[insn_idx].imm */
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_8, BPF_REG_9, offsetof(struct bpf_insn, imm)));
|
|
|
|
/* store upper half of addr into insn[insn_idx + 1].imm */
|
|
|
|
emit(gen, BPF_ALU64_IMM(BPF_RSH, BPF_REG_9, 32));
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_8, BPF_REG_9,
|
|
|
|
sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm)));
|
|
|
|
log:
|
|
|
|
emit_ksym_relo_log(gen, relo, kdesc->ref);
|
|
|
|
}
|
|
|
|
|
2021-10-28 14:34:56 +08:00
|
|
|
static __u32 src_reg_mask(void)
|
|
|
|
{
|
|
|
|
#if defined(__LITTLE_ENDIAN_BITFIELD)
|
|
|
|
return 0x0f; /* src_reg,dst_reg,... */
|
|
|
|
#elif defined(__BIG_ENDIAN_BITFIELD)
|
|
|
|
return 0xf0; /* dst_reg,src_reg,... */
|
|
|
|
#else
|
|
|
|
#error "Unsupported bit endianness, cannot proceed"
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* Expects:
|
|
|
|
* BPF_REG_8 - pointer to instruction
|
|
|
|
*/
|
|
|
|
static void emit_relo_ksym_btf(struct bpf_gen *gen, struct ksym_relo_desc *relo, int insn)
|
|
|
|
{
|
|
|
|
struct ksym_desc *kdesc;
|
2021-10-28 14:34:56 +08:00
|
|
|
__u32 reg_mask;
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
|
|
|
|
kdesc = get_ksym_desc(gen, relo);
|
|
|
|
if (!kdesc)
|
|
|
|
return;
|
|
|
|
/* try to copy from existing ldimm64 insn */
|
|
|
|
if (kdesc->ref > 1) {
|
|
|
|
move_blob2blob(gen, insn + offsetof(struct bpf_insn, imm), 4,
|
|
|
|
kdesc->insn + offsetof(struct bpf_insn, imm));
|
|
|
|
move_blob2blob(gen, insn + sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm), 4,
|
|
|
|
kdesc->insn + sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm));
|
2021-11-23 07:57:33 +08:00
|
|
|
/* jump over src_reg adjustment if imm is not 0, reuse BPF_REG_0 from move_blob2blob */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 3));
|
2021-10-28 14:34:56 +08:00
|
|
|
goto clear_src_reg;
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
}
|
|
|
|
/* remember insn offset, so we can copy BTF ID and FD later */
|
|
|
|
kdesc->insn = insn;
|
|
|
|
emit_bpf_find_by_name_kind(gen, relo);
|
2021-10-28 14:34:56 +08:00
|
|
|
if (!relo->is_weak)
|
|
|
|
emit_check_err(gen);
|
2021-11-23 07:57:32 +08:00
|
|
|
/* jump to success case */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JSGE, BPF_REG_7, 0, 3));
|
|
|
|
/* set values for insn[insn_idx].imm, insn[insn_idx + 1].imm as 0 */
|
2021-10-28 14:34:56 +08:00
|
|
|
emit(gen, BPF_ST_MEM(BPF_W, BPF_REG_8, offsetof(struct bpf_insn, imm), 0));
|
|
|
|
emit(gen, BPF_ST_MEM(BPF_W, BPF_REG_8, sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm), 0));
|
2021-11-23 07:57:32 +08:00
|
|
|
/* skip success case for ret < 0 */
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JA, 0, 0, 4));
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* store btf_id into insn[insn_idx].imm */
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_8, BPF_REG_7, offsetof(struct bpf_insn, imm)));
|
|
|
|
/* store btf_obj_fd into insn[insn_idx + 1].imm */
|
|
|
|
emit(gen, BPF_ALU64_IMM(BPF_RSH, BPF_REG_7, 32));
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_8, BPF_REG_7,
|
|
|
|
sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm)));
|
2021-11-23 07:57:32 +08:00
|
|
|
/* skip src_reg adjustment */
|
2021-10-28 14:34:56 +08:00
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JSGE, BPF_REG_7, 0, 3));
|
|
|
|
clear_src_reg:
|
|
|
|
/* clear bpf_object__relocate_data's src_reg assignment, otherwise we get a verifier failure */
|
|
|
|
reg_mask = src_reg_mask();
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_B, BPF_REG_9, BPF_REG_8, offsetofend(struct bpf_insn, code)));
|
|
|
|
emit(gen, BPF_ALU32_IMM(BPF_AND, BPF_REG_9, reg_mask));
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, offsetofend(struct bpf_insn, code)));
|
|
|
|
|
2021-10-28 14:34:55 +08:00
|
|
|
emit_ksym_relo_log(gen, relo, kdesc->ref);
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
}
|
|
|
|
|
2021-12-02 02:10:32 +08:00
|
|
|
void bpf_gen__record_relo_core(struct bpf_gen *gen,
|
|
|
|
const struct bpf_core_relo *core_relo)
|
|
|
|
{
|
|
|
|
struct bpf_core_relo *relos;
|
|
|
|
|
|
|
|
relos = libbpf_reallocarray(gen->core_relos, gen->core_relo_cnt + 1, sizeof(*relos));
|
|
|
|
if (!relos) {
|
|
|
|
gen->error = -ENOMEM;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
gen->core_relos = relos;
|
|
|
|
relos += gen->core_relo_cnt;
|
|
|
|
memcpy(relos, core_relo, sizeof(*relos));
|
|
|
|
gen->core_relo_cnt++;
|
|
|
|
}
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
static void emit_relo(struct bpf_gen *gen, struct ksym_relo_desc *relo, int insns)
|
|
|
|
{
|
|
|
|
int insn;
|
|
|
|
|
|
|
|
pr_debug("gen: emit_relo (%d): %s at %d\n", relo->kind, relo->name, relo->insn_idx);
|
|
|
|
insn = insns + sizeof(struct bpf_insn) * relo->insn_idx;
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_8, BPF_PSEUDO_MAP_IDX_VALUE, 0, 0, 0, insn));
|
|
|
|
switch (relo->kind) {
|
|
|
|
case BTF_KIND_VAR:
|
2021-10-28 14:34:55 +08:00
|
|
|
if (relo->is_typeless)
|
|
|
|
emit_relo_ksym_typeless(gen, relo, insn);
|
|
|
|
else
|
|
|
|
emit_relo_ksym_btf(gen, relo, insn);
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
break;
|
|
|
|
case BTF_KIND_FUNC:
|
|
|
|
emit_relo_kfunc_btf(gen, relo, insn);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
pr_warn("Unknown relocation kind '%d'\n", relo->kind);
|
|
|
|
gen->error = -EDOM;
|
|
|
|
return;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emit_relos(struct bpf_gen *gen, int insns)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < gen->relo_cnt; i++)
|
|
|
|
emit_relo(gen, gen->relos + i, insns);
|
|
|
|
}
|
|
|
|
|
2021-12-02 02:10:32 +08:00
|
|
|
static void cleanup_core_relo(struct bpf_gen *gen)
|
|
|
|
{
|
|
|
|
if (!gen->core_relo_cnt)
|
|
|
|
return;
|
|
|
|
free(gen->core_relos);
|
|
|
|
gen->core_relo_cnt = 0;
|
|
|
|
gen->core_relos = NULL;
|
|
|
|
}
|
|
|
|
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
static void cleanup_relos(struct bpf_gen *gen, int insns)
|
|
|
|
{
|
|
|
|
int i, insn;
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
for (i = 0; i < gen->nr_ksyms; i++) {
|
2021-10-28 14:34:55 +08:00
|
|
|
/* only close fds for typed ksyms and kfuncs */
|
|
|
|
if (gen->ksyms[i].kind == BTF_KIND_VAR && !gen->ksyms[i].typeless) {
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* close fd recorded in insn[insn_idx + 1].imm */
|
|
|
|
insn = gen->ksyms[i].insn;
|
|
|
|
insn += sizeof(struct bpf_insn) + offsetof(struct bpf_insn, imm);
|
|
|
|
emit_sys_close_blob(gen, insn);
|
2021-10-28 14:34:55 +08:00
|
|
|
} else if (gen->ksyms[i].kind == BTF_KIND_FUNC) {
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
emit_sys_close_blob(gen, blob_fd_array_off(gen, gen->ksyms[i].off));
|
|
|
|
if (gen->ksyms[i].off < MAX_FD_ARRAY_SZ)
|
|
|
|
gen->nr_fd_array--;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (gen->nr_ksyms) {
|
|
|
|
free(gen->ksyms);
|
|
|
|
gen->nr_ksyms = 0;
|
|
|
|
gen->ksyms = NULL;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
}
|
|
|
|
if (gen->relo_cnt) {
|
|
|
|
free(gen->relos);
|
|
|
|
gen->relo_cnt = 0;
|
|
|
|
gen->relos = NULL;
|
|
|
|
}
|
2021-12-02 02:10:32 +08:00
|
|
|
cleanup_core_relo(gen);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
void bpf_gen__prog_load(struct bpf_gen *gen,
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
enum bpf_prog_type prog_type, const char *prog_name,
|
|
|
|
const char *license, struct bpf_insn *insns, size_t insn_cnt,
|
|
|
|
struct bpf_prog_load_opts *load_attr, int prog_idx)
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
{
|
2021-12-02 02:10:32 +08:00
|
|
|
int prog_load_attr, license_off, insns_off, func_info, line_info, core_relos;
|
|
|
|
int attr_size = offsetofend(union bpf_attr, core_relo_rec_size);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
union bpf_attr attr;
|
|
|
|
|
|
|
|
memset(&attr, 0, attr_size);
|
2021-12-02 02:10:32 +08:00
|
|
|
pr_debug("gen: prog_load: type %d insns_cnt %zd progi_idx %d\n",
|
|
|
|
prog_type, insn_cnt, prog_idx);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
/* add license string to blob of bytes */
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
license_off = add_data(gen, license, strlen(license) + 1);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
/* add insns to blob of bytes */
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
insns_off = add_data(gen, insns, insn_cnt * sizeof(struct bpf_insn));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
attr.prog_type = prog_type;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
attr.expected_attach_type = load_attr->expected_attach_type;
|
|
|
|
attr.attach_btf_id = load_attr->attach_btf_id;
|
|
|
|
attr.prog_ifindex = load_attr->prog_ifindex;
|
|
|
|
attr.kern_version = 0;
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
attr.insn_cnt = (__u32)insn_cnt;
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
attr.prog_flags = load_attr->prog_flags;
|
|
|
|
|
|
|
|
attr.func_info_rec_size = load_attr->func_info_rec_size;
|
|
|
|
attr.func_info_cnt = load_attr->func_info_cnt;
|
|
|
|
func_info = add_data(gen, load_attr->func_info,
|
|
|
|
attr.func_info_cnt * attr.func_info_rec_size);
|
|
|
|
|
|
|
|
attr.line_info_rec_size = load_attr->line_info_rec_size;
|
|
|
|
attr.line_info_cnt = load_attr->line_info_cnt;
|
|
|
|
line_info = add_data(gen, load_attr->line_info,
|
|
|
|
attr.line_info_cnt * attr.line_info_rec_size);
|
|
|
|
|
2021-12-02 02:10:32 +08:00
|
|
|
attr.core_relo_rec_size = sizeof(struct bpf_core_relo);
|
|
|
|
attr.core_relo_cnt = gen->core_relo_cnt;
|
|
|
|
core_relos = add_data(gen, gen->core_relos,
|
|
|
|
attr.core_relo_cnt * attr.core_relo_rec_size);
|
|
|
|
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
memcpy(attr.prog_name, prog_name,
|
|
|
|
min((unsigned)strlen(prog_name), BPF_OBJ_NAME_LEN - 1));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
prog_load_attr = add_data(gen, &attr, attr_size);
|
|
|
|
|
|
|
|
/* populate union bpf_attr with a pointer to license */
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
emit_rel_store(gen, attr_field(prog_load_attr, license), license_off);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
|
|
|
/* populate union bpf_attr with a pointer to instructions */
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
emit_rel_store(gen, attr_field(prog_load_attr, insns), insns_off);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
|
|
|
/* populate union bpf_attr with a pointer to func_info */
|
|
|
|
emit_rel_store(gen, attr_field(prog_load_attr, func_info), func_info);
|
|
|
|
|
|
|
|
/* populate union bpf_attr with a pointer to line_info */
|
|
|
|
emit_rel_store(gen, attr_field(prog_load_attr, line_info), line_info);
|
|
|
|
|
2021-12-02 02:10:32 +08:00
|
|
|
/* populate union bpf_attr with a pointer to core_relos */
|
|
|
|
emit_rel_store(gen, attr_field(prog_load_attr, core_relos), core_relos);
|
|
|
|
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
/* populate union bpf_attr fd_array with a pointer to data where map_fds are saved */
|
|
|
|
emit_rel_store(gen, attr_field(prog_load_attr, fd_array), gen->fd_array);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
|
|
|
|
/* populate union bpf_attr with user provided log details */
|
|
|
|
move_ctx2blob(gen, attr_field(prog_load_attr, log_level), 4,
|
|
|
|
offsetof(struct bpf_loader_ctx, log_level), false);
|
|
|
|
move_ctx2blob(gen, attr_field(prog_load_attr, log_size), 4,
|
|
|
|
offsetof(struct bpf_loader_ctx, log_size), false);
|
|
|
|
move_ctx2blob(gen, attr_field(prog_load_attr, log_buf), 8,
|
|
|
|
offsetof(struct bpf_loader_ctx, log_buf), false);
|
|
|
|
/* populate union bpf_attr with btf_fd saved in the stack earlier */
|
|
|
|
move_stack2blob(gen, attr_field(prog_load_attr, prog_btf_fd), 4,
|
|
|
|
stack_off(btf_fd));
|
|
|
|
if (gen->attach_kind) {
|
|
|
|
emit_find_attach_target(gen);
|
|
|
|
/* populate union bpf_attr with btf_id and btf_obj_fd found by helper */
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_0, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, prog_load_attr));
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_0, BPF_REG_7,
|
|
|
|
offsetof(union bpf_attr, attach_btf_id)));
|
|
|
|
emit(gen, BPF_ALU64_IMM(BPF_RSH, BPF_REG_7, 32));
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_0, BPF_REG_7,
|
|
|
|
offsetof(union bpf_attr, attach_btf_obj_fd)));
|
|
|
|
}
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
emit_relos(gen, insns_off);
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
/* emit PROG_LOAD command */
|
|
|
|
emit_sys_bpf(gen, BPF_PROG_LOAD, prog_load_attr, attr_size);
|
|
|
|
debug_ret(gen, "prog_load %s insn_cnt %d", attr.prog_name, attr.insn_cnt);
|
|
|
|
/* successful or not, close btf module FDs used in extern ksyms and attach_btf_obj_fd */
|
libbpf: Unify low-level BPF_PROG_LOAD APIs into bpf_prog_load()
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
2021-11-04 06:08:36 +08:00
|
|
|
cleanup_relos(gen, insns_off);
|
2021-12-02 02:10:34 +08:00
|
|
|
if (gen->attach_kind) {
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit_sys_close_blob(gen,
|
|
|
|
attr_field(prog_load_attr, attach_btf_obj_fd));
|
2021-12-02 02:10:34 +08:00
|
|
|
gen->attach_kind = 0;
|
|
|
|
}
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit_check_err(gen);
|
|
|
|
/* remember prog_fd in the stack, if successful */
|
|
|
|
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_7,
|
|
|
|
stack_off(prog_fd[gen->nr_progs])));
|
|
|
|
gen->nr_progs++;
|
|
|
|
}
|
|
|
|
|
|
|
|
void bpf_gen__map_update_elem(struct bpf_gen *gen, int map_idx, void *pvalue,
|
|
|
|
__u32 value_size)
|
|
|
|
{
|
|
|
|
int attr_size = offsetofend(union bpf_attr, flags);
|
|
|
|
int map_update_attr, value, key;
|
|
|
|
union bpf_attr attr;
|
|
|
|
int zero = 0;
|
|
|
|
|
|
|
|
memset(&attr, 0, attr_size);
|
|
|
|
pr_debug("gen: map_update_elem: idx %d\n", map_idx);
|
|
|
|
|
|
|
|
value = add_data(gen, pvalue, value_size);
|
|
|
|
key = add_data(gen, &zero, sizeof(zero));
|
|
|
|
|
|
|
|
/* if (map_desc[map_idx].initial_value)
|
|
|
|
* copy_from_user(value, initial_value, value_size);
|
|
|
|
*/
|
|
|
|
emit(gen, BPF_LDX_MEM(BPF_DW, BPF_REG_3, BPF_REG_6,
|
|
|
|
sizeof(struct bpf_loader_ctx) +
|
|
|
|
sizeof(struct bpf_map_desc) * map_idx +
|
|
|
|
offsetof(struct bpf_map_desc, initial_value)));
|
|
|
|
emit(gen, BPF_JMP_IMM(BPF_JEQ, BPF_REG_3, 0, 4));
|
|
|
|
emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_IDX_VALUE,
|
|
|
|
0, 0, 0, value));
|
|
|
|
emit(gen, BPF_MOV64_IMM(BPF_REG_2, value_size));
|
|
|
|
emit(gen, BPF_EMIT_CALL(BPF_FUNC_copy_from_user));
|
|
|
|
|
|
|
|
map_update_attr = add_data(gen, &attr, attr_size);
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
move_blob2blob(gen, attr_field(map_update_attr, map_fd), 4,
|
|
|
|
blob_fd_array_off(gen, map_idx));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
emit_rel_store(gen, attr_field(map_update_attr, key), key);
|
|
|
|
emit_rel_store(gen, attr_field(map_update_attr, value), value);
|
|
|
|
/* emit MAP_UPDATE_ELEM command */
|
|
|
|
emit_sys_bpf(gen, BPF_MAP_UPDATE_ELEM, map_update_attr, attr_size);
|
|
|
|
debug_ret(gen, "update_elem idx %d value_size %d", map_idx, value_size);
|
|
|
|
emit_check_err(gen);
|
|
|
|
}
|
|
|
|
|
2021-12-02 02:10:33 +08:00
|
|
|
void bpf_gen__populate_outer_map(struct bpf_gen *gen, int outer_map_idx, int slot,
|
|
|
|
int inner_map_idx)
|
|
|
|
{
|
|
|
|
int attr_size = offsetofend(union bpf_attr, flags);
|
|
|
|
int map_update_attr, key;
|
|
|
|
union bpf_attr attr;
|
|
|
|
|
|
|
|
memset(&attr, 0, attr_size);
|
|
|
|
pr_debug("gen: populate_outer_map: outer %d key %d inner %d\n",
|
|
|
|
outer_map_idx, slot, inner_map_idx);
|
|
|
|
|
|
|
|
key = add_data(gen, &slot, sizeof(slot));
|
|
|
|
|
|
|
|
map_update_attr = add_data(gen, &attr, attr_size);
|
|
|
|
move_blob2blob(gen, attr_field(map_update_attr, map_fd), 4,
|
|
|
|
blob_fd_array_off(gen, outer_map_idx));
|
|
|
|
emit_rel_store(gen, attr_field(map_update_attr, key), key);
|
|
|
|
emit_rel_store(gen, attr_field(map_update_attr, value),
|
|
|
|
blob_fd_array_off(gen, inner_map_idx));
|
|
|
|
|
|
|
|
/* emit MAP_UPDATE_ELEM command */
|
|
|
|
emit_sys_bpf(gen, BPF_MAP_UPDATE_ELEM, map_update_attr, attr_size);
|
|
|
|
debug_ret(gen, "populate_outer_map outer %d key %d inner %d",
|
|
|
|
outer_map_idx, slot, inner_map_idx);
|
|
|
|
emit_check_err(gen);
|
|
|
|
}
|
|
|
|
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
void bpf_gen__map_freeze(struct bpf_gen *gen, int map_idx)
|
|
|
|
{
|
|
|
|
int attr_size = offsetofend(union bpf_attr, map_fd);
|
|
|
|
int map_freeze_attr;
|
|
|
|
union bpf_attr attr;
|
|
|
|
|
|
|
|
memset(&attr, 0, attr_size);
|
|
|
|
pr_debug("gen: map_freeze: idx %d\n", map_idx);
|
|
|
|
map_freeze_attr = add_data(gen, &attr, attr_size);
|
libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-02 09:17:56 +08:00
|
|
|
move_blob2blob(gen, attr_field(map_freeze_attr, map_fd), 4,
|
|
|
|
blob_fd_array_off(gen, map_idx));
|
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
2021-05-14 08:36:16 +08:00
|
|
|
/* emit MAP_FREEZE command */
|
|
|
|
emit_sys_bpf(gen, BPF_MAP_FREEZE, map_freeze_attr, attr_size);
|
|
|
|
debug_ret(gen, "map_freeze");
|
|
|
|
emit_check_err(gen);
|
|
|
|
}
|