OpenCloudOS-Kernel/arch/x86/kernel/signal_32.c

718 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
*/
#include <linux/list.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/suspend.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/tracehook.h>
#include <linux/elf.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/vdso.h>
#include <asm/syscall.h>
#include <asm/syscalls.h>
#include "sigframe.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
#define __FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_OF | \
X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
X86_EFLAGS_CF)
#ifdef CONFIG_X86_32
# define FIX_EFLAGS (__FIX_EFLAGS | X86_EFLAGS_RF)
#else
# define FIX_EFLAGS __FIX_EFLAGS
#endif
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int
sys_sigsuspend(int history0, int history1, old_sigset_t mask)
{
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
current->saved_sigmask = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
current->state = TASK_INTERRUPTIBLE;
schedule();
set_restore_sigmask();
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
return -ERESTARTNOHAND;
}
asmlinkage int
sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction __user *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
if (act) {
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
return -EFAULT;
__get_user(new_ka.sa.sa_flags, &act->sa_flags);
__get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
return -EFAULT;
__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
return ret;
}
asmlinkage int sys_sigaltstack(unsigned long bx)
{
/*
* This is needed to make gcc realize it doesn't own the
* "struct pt_regs"
*/
struct pt_regs *regs = (struct pt_regs *)&bx;
const stack_t __user *uss = (const stack_t __user *)bx;
stack_t __user *uoss = (stack_t __user *)regs->cx;
return do_sigaltstack(uss, uoss, regs->sp);
}
/*
* Do a signal return; undo the signal stack.
*/
static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
unsigned long *pax)
{
unsigned int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
#define COPY(x) err |= __get_user(regs->x, &sc->x)
#define COPY_SEG(seg) \
{ unsigned short tmp; \
err |= __get_user(tmp, &sc->seg); \
regs->seg = tmp; }
#define COPY_SEG_STRICT(seg) \
{ unsigned short tmp; \
err |= __get_user(tmp, &sc->seg); \
regs->seg = tmp|3; }
#define GET_SEG(seg) \
{ unsigned short tmp; \
err |= __get_user(tmp, &sc->seg); \
loadsegment(seg, tmp); }
GET_SEG(gs);
COPY_SEG(fs);
COPY_SEG(es);
COPY_SEG(ds);
COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
COPY(dx); COPY(cx); COPY(ip);
COPY_SEG_STRICT(cs);
COPY_SEG_STRICT(ss);
{
unsigned int tmpflags;
err |= __get_user(tmpflags, &sc->flags);
regs->flags = (regs->flags & ~FIX_EFLAGS) |
(tmpflags & FIX_EFLAGS);
regs->orig_ax = -1; /* disable syscall checks */
}
{
void __user *buf;
err |= __get_user(buf, &sc->fpstate);
err |= restore_i387_xstate(buf);
}
err |= __get_user(*pax, &sc->ax);
return err;
}
asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
{
struct sigframe __user *frame;
struct pt_regs *regs;
unsigned long ax;
sigset_t set;
regs = (struct pt_regs *) &__unused;
frame = (struct sigframe __user *)(regs->sp - 8);
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask) || (_NSIG_WORDS > 1
&& __copy_from_user(&set.sig[1], &frame->extramask,
sizeof(frame->extramask))))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->sc, &ax))
goto badframe;
return ax;
badframe:
if (show_unhandled_signals && printk_ratelimit()) {
printk("%s%s[%d] bad frame in sigreturn frame:"
"%p ip:%lx sp:%lx oeax:%lx",
task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
current->comm, task_pid_nr(current), frame, regs->ip,
regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
printk(KERN_CONT "\n");
}
force_sig(SIGSEGV, current);
return 0;
}
static long do_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long ax;
sigset_t set;
frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
return ax;
badframe:
signal_fault(regs, frame, "rt_sigreturn");
return 0;
}
asmlinkage int sys_rt_sigreturn(unsigned long __unused)
{
struct pt_regs *regs = (struct pt_regs *)&__unused;
return do_rt_sigreturn(regs);
}
/*
* Set up a signal frame.
*/
static int
setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
struct pt_regs *regs, unsigned long mask)
{
int tmp, err = 0;
err |= __put_user(regs->fs, (unsigned int __user *)&sc->fs);
savesegment(gs, tmp);
err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
err |= __put_user(regs->es, (unsigned int __user *)&sc->es);
err |= __put_user(regs->ds, (unsigned int __user *)&sc->ds);
err |= __put_user(regs->di, &sc->di);
err |= __put_user(regs->si, &sc->si);
err |= __put_user(regs->bp, &sc->bp);
err |= __put_user(regs->sp, &sc->sp);
err |= __put_user(regs->bx, &sc->bx);
err |= __put_user(regs->dx, &sc->dx);
err |= __put_user(regs->cx, &sc->cx);
err |= __put_user(regs->ax, &sc->ax);
err |= __put_user(current->thread.trap_no, &sc->trapno);
err |= __put_user(current->thread.error_code, &sc->err);
err |= __put_user(regs->ip, &sc->ip);
err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs);
err |= __put_user(regs->flags, &sc->flags);
err |= __put_user(regs->sp, &sc->sp_at_signal);
err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
tmp = save_i387_xstate(fpstate);
if (tmp < 0)
err = 1;
else
err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
/* non-iBCS2 extensions.. */
err |= __put_user(mask, &sc->oldmask);
err |= __put_user(current->thread.cr2, &sc->cr2);
return err;
}
/*
* Determine which stack to use..
*/
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
void **fpstate)
{
unsigned long sp;
/* Default to using normal stack */
sp = regs->sp;
x86: protect against sigaltstack wraparound cf http://lkml.org/lkml/2007/10/3/41 To summarize: on Linux, SA_ONSTACK decides whether you are already on the signal stack based on the value of the SP at the time of a signal. If you are not already inside the range, you are not "on the signal stack" and so the new signal handler frame starts over at the base of the signal stack. sigaltstack (and sigstack before it) was invented in BSD. There, the SA_ONSTACK behavior has always been different. It uses a kernel state flag to decide, rather than the SP value. When you first take an SA_ONSTACK signal and switch to the alternate signal stack, it sets the SS_ONSTACK flag in the thread's sigaltstack state in the kernel. Thereafter you are "on the signal stack" and don't switch SP before pushing a handler frame no matter what the SP value is. Only when you sigreturn from the original handler context do you clear the SS_ONSTACK flag so that a new handler frame will start over at the base of the alternate signal stack. The undesireable effect of the Linux behavior is that an overflow of the alternate signal stack can not only go undetected, but lead to a ring buffer effect of clobbering the original handler frame at the base of the signal stack for each successive signal that comes just after the overflow. This is what Shi Weihua's test case demonstrates. Normally this does not come up because of the signal mask, but the test case uses SA_NODEFER for its SIGSEGV handler. The other subtle part of the existing Linux semantics is that a simple longjmp out of a signal handler serves to take you off the signal stack in a safe and reliable fashion without having used sigreturn (nor having just returned from the handler normally, which means the same). After the longjmp (or even informal stack switching not via any proper libc or kernel interface), the alternate signal stack stands ready to be used again. A paranoid program would allocate a PROT_NONE red zone around its alternate signal stack. Then a small overflow would trigger a SIGSEGV in handler setup, and be fatal (core dump) whether or not SIGSEGV is blocked. As with thread stack red zones, that cannot catch all overflows (or underflows). e.g., a local array as large as page size allocated in a function called from a handler, but not actually touched before more calls push more stack, could cause an overflow that silently pushes into some unrelated allocated pages. The BSD behavior does not do anything in particular about overflow. But it does at least avoid the wraparound or "ring buffer effect", so you'll just get a straightforward all-out overflow down your address space past the low end of the alternate signal stack. I don't know what the BSD behavior is for longjmp out of an SA_ONSTACK handler. The POSIX wording relating to sigaltstack is pretty minimal. I don't think it speaks to this issue one way or another. (The program that overflows its stack is clearly in undefined behavior territory of one sort or another anyhow.) Given the longjmp issue and the potential for highly subtle complications in existing programs relying on this in arcane ways deep in their code, I am very dubious about changing the behavior to the BSD style persistent flag. I think Shi Weihua's patches have a similar effect by tracking the SP used in the last handler setup. I think it would be sensible for the signal handler setup code to detect when it would itself be causing a stack overflow. Maybe something like the following patch (untested). This issue exists in the same way on all machines, so ideally they would all do a similar check. When it's the handler function itself or its callees that cause the overflow, rather than the signal handler frame setup alone crossing the boundary, this still won't help. But I don't see any way to distinguish that from the valid longjmp case. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:06 +08:00
/*
* If we are on the alternate signal stack and would overflow it, don't.
* Return an always-bogus address instead so we will die with SIGSEGV.
*/
if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
x86: protect against sigaltstack wraparound cf http://lkml.org/lkml/2007/10/3/41 To summarize: on Linux, SA_ONSTACK decides whether you are already on the signal stack based on the value of the SP at the time of a signal. If you are not already inside the range, you are not "on the signal stack" and so the new signal handler frame starts over at the base of the signal stack. sigaltstack (and sigstack before it) was invented in BSD. There, the SA_ONSTACK behavior has always been different. It uses a kernel state flag to decide, rather than the SP value. When you first take an SA_ONSTACK signal and switch to the alternate signal stack, it sets the SS_ONSTACK flag in the thread's sigaltstack state in the kernel. Thereafter you are "on the signal stack" and don't switch SP before pushing a handler frame no matter what the SP value is. Only when you sigreturn from the original handler context do you clear the SS_ONSTACK flag so that a new handler frame will start over at the base of the alternate signal stack. The undesireable effect of the Linux behavior is that an overflow of the alternate signal stack can not only go undetected, but lead to a ring buffer effect of clobbering the original handler frame at the base of the signal stack for each successive signal that comes just after the overflow. This is what Shi Weihua's test case demonstrates. Normally this does not come up because of the signal mask, but the test case uses SA_NODEFER for its SIGSEGV handler. The other subtle part of the existing Linux semantics is that a simple longjmp out of a signal handler serves to take you off the signal stack in a safe and reliable fashion without having used sigreturn (nor having just returned from the handler normally, which means the same). After the longjmp (or even informal stack switching not via any proper libc or kernel interface), the alternate signal stack stands ready to be used again. A paranoid program would allocate a PROT_NONE red zone around its alternate signal stack. Then a small overflow would trigger a SIGSEGV in handler setup, and be fatal (core dump) whether or not SIGSEGV is blocked. As with thread stack red zones, that cannot catch all overflows (or underflows). e.g., a local array as large as page size allocated in a function called from a handler, but not actually touched before more calls push more stack, could cause an overflow that silently pushes into some unrelated allocated pages. The BSD behavior does not do anything in particular about overflow. But it does at least avoid the wraparound or "ring buffer effect", so you'll just get a straightforward all-out overflow down your address space past the low end of the alternate signal stack. I don't know what the BSD behavior is for longjmp out of an SA_ONSTACK handler. The POSIX wording relating to sigaltstack is pretty minimal. I don't think it speaks to this issue one way or another. (The program that overflows its stack is clearly in undefined behavior territory of one sort or another anyhow.) Given the longjmp issue and the potential for highly subtle complications in existing programs relying on this in arcane ways deep in their code, I am very dubious about changing the behavior to the BSD style persistent flag. I think Shi Weihua's patches have a similar effect by tracking the SP used in the last handler setup. I think it would be sensible for the signal handler setup code to detect when it would itself be causing a stack overflow. Maybe something like the following patch (untested). This issue exists in the same way on all machines, so ideally they would all do a similar check. When it's the handler function itself or its callees that cause the overflow, rather than the signal handler frame setup alone crossing the boundary, this still won't help. But I don't see any way to distinguish that from the valid longjmp case. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:06 +08:00
return (void __user *) -1L;
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
} else {
/* This is the legacy signal stack switching. */
if ((regs->ss & 0xffff) != __USER_DS &&
!(ka->sa.sa_flags & SA_RESTORER) &&
ka->sa.sa_restorer)
sp = (unsigned long) ka->sa.sa_restorer;
}
if (used_math()) {
sp = sp - sig_xstate_size;
*fpstate = (struct _fpstate *) sp;
}
sp -= frame_size;
/*
* Align the stack pointer according to the i386 ABI,
* i.e. so that on function entry ((sp + 4) & 15) == 0.
*/
sp = ((sp + 4) & -16ul) - 4;
return (void __user *) sp;
}
static int
__setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
struct pt_regs *regs)
{
struct sigframe __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
if (__put_user(sig, &frame->sig))
return -EFAULT;
if (setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
return -EFAULT;
if (_NSIG_WORDS > 1) {
if (__copy_to_user(&frame->extramask, &set->sig[1],
sizeof(frame->extramask)))
return -EFAULT;
}
if (current->mm->context.vdso)
restorer = VDSO32_SYMBOL(current->mm->context.vdso, sigreturn);
else
restorer = &frame->retcode;
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* Set up to return from userspace. */
err |= __put_user(restorer, &frame->pretcode);
/*
* This is popl %eax ; movl $__NR_sigreturn, %eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
regs->ip = (unsigned long)ka->sa.sa_handler;
regs->ax = (unsigned long)sig;
regs->dx = 0;
regs->cx = 0;
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = __USER_CS;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
return 0;
}
static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
err |= __put_user(sig, &frame->sig);
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
return -EFAULT;
/* Create the ucontext. */
if (cpu_has_xsave)
err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
else
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->sp),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
return -EFAULT;
/* Set up to return from userspace. */
restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
err |= __put_user(restorer, &frame->pretcode);
/*
* This is movl $__NR_rt_sigreturn, %ax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
regs->ip = (unsigned long)ka->sa.sa_handler;
regs->ax = (unsigned long)sig;
regs->dx = (unsigned long)&frame->info;
regs->cx = (unsigned long)&frame->uc;
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = __USER_CS;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
return 0;
}
/*
* OK, we're invoking a handler:
*/
static int signr_convert(int sig)
{
struct thread_info *info = current_thread_info();
if (info->exec_domain && info->exec_domain->signal_invmap && sig < 32)
return info->exec_domain->signal_invmap[sig];
return sig;
}
#define is_ia32 1
static int
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
int usig = signr_convert(sig);
int ret;
/* Set up the stack frame */
if (is_ia32) {
if (ka->sa.sa_flags & SA_SIGINFO)
ret = __setup_rt_frame(usig, ka, info, set, regs);
else
ret = __setup_frame(usig, ka, set, regs);
} else
ret = __setup_rt_frame(sig, ka, info, set, regs);
if (ret) {
force_sigsegv(sig, current);
return -EFAULT;
}
return ret;
}
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
{
int ret;
/* Are we from a system call? */
if (syscall_get_nr(current, regs) >= 0) {
/* If so, check system call restarting.. */
switch (syscall_get_error(current, regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ax = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ax = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->ax = regs->orig_ax;
regs->ip -= 2;
break;
}
}
/*
* If TF is set due to a debugger (TIF_FORCED_TF), clear the TF
* flag so that register information in the sigcontext is correct.
*/
if (unlikely(regs->flags & X86_EFLAGS_TF) &&
likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
regs->flags &= ~X86_EFLAGS_TF;
ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret)
return ret;
#ifdef CONFIG_X86_64
/*
* This has nothing to do with segment registers,
* despite the name. This magic affects uaccess.h
* macros' behavior. Reset it to the normal setting.
*/
set_fs(USER_DS);
#endif
/*
* Clear the direction flag as per the ABI for function entry.
*/
regs->flags &= ~X86_EFLAGS_DF;
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->flags &= ~X86_EFLAGS_TF;
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
tracehook_signal_handler(sig, info, ka, regs,
test_thread_flag(TIF_SINGLESTEP));
return 0;
}
#define NR_restart_syscall __NR_restart_syscall
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
sigset_t *oldset;
/*
* We want the common case to go fast, which is why we may in certain
* cases get here from kernel mode. Just return without doing anything
* if so.
* X86_32: vm86 regs switched out by assembly code before reaching
* here, so testing against kernel CS suffices.
*/
if (!user_mode(regs))
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
return;
if (current_thread_info()->status & TS_RESTORE_SIGMASK)
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/*
* Re-enable any watchpoints before delivering the
* signal to user space. The processor register will
* have been cleared if the watchpoint triggered
* inside the kernel.
*/
if (current->thread.debugreg7)
set_debugreg(current->thread.debugreg7, 7);
/* Whee! Actually deliver the signal. */
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
/*
* A signal was successfully delivered; the saved
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TS_RESTORE_SIGMASK flag.
*/
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
}
return;
}
/* Did we come from a system call? */
if (syscall_get_nr(current, regs) >= 0) {
/* Restart the system call - no handlers present */
switch (syscall_get_error(current, regs)) {
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->ax = regs->orig_ax;
regs->ip -= 2;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
break;
case -ERESTART_RESTARTBLOCK:
regs->ax = NR_restart_syscall;
regs->ip -= 2;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
break;
}
}
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
/*
* If there's no signal to deliver, we just put the saved sigmask
* back.
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}
/*
* notification of userspace execution resumption
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
* - triggered by the TIF_WORK_MASK flags
*/
void
do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
{
#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
/* notify userspace of pending MCEs */
if (thread_info_flags & _TIF_MCE_NOTIFY)
mce_notify_user();
#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
do_signal(regs);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
#ifdef CONFIG_X86_32
clear_thread_flag(TIF_IRET);
#endif /* CONFIG_X86_32 */
}
void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
{
struct task_struct *me = current;
if (show_unhandled_signals && printk_ratelimit()) {
printk(KERN_INFO
"%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
me->comm, me->pid, where, frame,
regs->ip, regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
printk(KERN_CONT "\n");
}
force_sig(SIGSEGV, me);
}