UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/infiniband/core/roce_gid_mgmt.c

782 lines
20 KiB
C
Raw Normal View History

IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
/*
* Copyright (c) 2015, Mellanox Technologies inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "core_priv.h"
#include <linux/in.h>
#include <linux/in6.h>
/* For in6_dev_get/in6_dev_put */
#include <net/addrconf.h>
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
#include <net/bonding.h>
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
#include <rdma/ib_cache.h>
#include <rdma/ib_addr.h>
IB/core: Add ordered workqueue for RoCE GID management Currently the RoCE GID management uses the ib_wq to do add and delete new GIDs according to the netdev events. The ib_wq isn't an ordered workqueue and thus two work elements can be executed concurrently which will result in unexpected behavior and inconsistency of the GIDs cache content. Example: ifconfig eth1 11.11.11.11/16 up This command will invoke the following netdev events in the following order: 1. NETDEV_UP 2. NETDEV_DOWN 3. NETDEV_UP If (2) and (3) will be executed concurrently or in reverse order, instead of having a new GID with 11.11.11.11 IP, we will end up without any new GIDs. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-30 14:58:06 +08:00
static struct workqueue_struct *gid_cache_wq;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
enum gid_op_type {
GID_DEL = 0,
GID_ADD
};
struct update_gid_event_work {
struct work_struct work;
union ib_gid gid;
struct ib_gid_attr gid_attr;
enum gid_op_type gid_op;
};
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
#define ROCE_NETDEV_CALLBACK_SZ 3
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
struct netdev_event_work_cmd {
roce_netdev_callback cb;
roce_netdev_filter filter;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
struct net_device *ndev;
struct net_device *filter_ndev;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
};
struct netdev_event_work {
struct work_struct work;
struct netdev_event_work_cmd cmds[ROCE_NETDEV_CALLBACK_SZ];
};
IB/core: Add gid_type to gid attribute In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:47 +08:00
static const struct {
bool (*is_supported)(const struct ib_device *device, u8 port_num);
enum ib_gid_type gid_type;
} PORT_CAP_TO_GID_TYPE[] = {
IB/core: Add ROCE_UDP_ENCAP (RoCE V2) type Adding RoCE v2 GID type and port type. Vendors which support this type will get their GID table populated with RoCE v2 GIDs automatically. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:50 +08:00
{rdma_protocol_roce_eth_encap, IB_GID_TYPE_ROCE},
{rdma_protocol_roce_udp_encap, IB_GID_TYPE_ROCE_UDP_ENCAP},
IB/core: Add gid_type to gid attribute In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:47 +08:00
};
#define CAP_TO_GID_TABLE_SIZE ARRAY_SIZE(PORT_CAP_TO_GID_TYPE)
unsigned long roce_gid_type_mask_support(struct ib_device *ib_dev, u8 port)
{
int i;
unsigned int ret_flags = 0;
if (!rdma_protocol_roce(ib_dev, port))
return 1UL << IB_GID_TYPE_IB;
for (i = 0; i < CAP_TO_GID_TABLE_SIZE; i++)
if (PORT_CAP_TO_GID_TYPE[i].is_supported(ib_dev, port))
ret_flags |= 1UL << PORT_CAP_TO_GID_TYPE[i].gid_type;
return ret_flags;
}
EXPORT_SYMBOL(roce_gid_type_mask_support);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
static void update_gid(enum gid_op_type gid_op, struct ib_device *ib_dev,
u8 port, union ib_gid *gid,
struct ib_gid_attr *gid_attr)
{
IB/core: Add gid_type to gid attribute In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:47 +08:00
int i;
unsigned long gid_type_mask = roce_gid_type_mask_support(ib_dev, port);
for (i = 0; i < IB_GID_TYPE_SIZE; i++) {
if ((1UL << i) & gid_type_mask) {
gid_attr->gid_type = i;
switch (gid_op) {
case GID_ADD:
ib_cache_gid_add(ib_dev, port,
gid, gid_attr);
break;
case GID_DEL:
ib_cache_gid_del(ib_dev, port,
gid, gid_attr);
break;
}
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
}
}
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
enum bonding_slave_state {
BONDING_SLAVE_STATE_ACTIVE = 1UL << 0,
BONDING_SLAVE_STATE_INACTIVE = 1UL << 1,
/* No primary slave or the device isn't a slave in bonding */
BONDING_SLAVE_STATE_NA = 1UL << 2,
};
static enum bonding_slave_state is_eth_active_slave_of_bonding_rcu(struct net_device *dev,
struct net_device *upper)
{
if (upper && netif_is_bond_master(upper)) {
struct net_device *pdev =
bond_option_active_slave_get_rcu(netdev_priv(upper));
if (pdev)
return dev == pdev ? BONDING_SLAVE_STATE_ACTIVE :
BONDING_SLAVE_STATE_INACTIVE;
}
return BONDING_SLAVE_STATE_NA;
}
#define REQUIRED_BOND_STATES (BONDING_SLAVE_STATE_ACTIVE | \
BONDING_SLAVE_STATE_NA)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
static int is_eth_port_of_netdev(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
struct net_device *real_dev;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
int res;
if (!rdma_ndev)
return 0;
rcu_read_lock();
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
real_dev = rdma_vlan_dev_real_dev(cookie);
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
if (!real_dev)
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
real_dev = cookie;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
res = ((rdma_is_upper_dev_rcu(rdma_ndev, cookie) &&
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
(is_eth_active_slave_of_bonding_rcu(rdma_ndev, real_dev) &
REQUIRED_BOND_STATES)) ||
real_dev == rdma_ndev);
rcu_read_unlock();
return res;
}
static int is_eth_port_inactive_slave(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
struct net_device *master_dev;
int res;
if (!rdma_ndev)
return 0;
rcu_read_lock();
master_dev = netdev_master_upper_dev_get_rcu(rdma_ndev);
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
res = is_eth_active_slave_of_bonding_rcu(rdma_ndev, master_dev) ==
BONDING_SLAVE_STATE_INACTIVE;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
rcu_read_unlock();
return res;
}
static int pass_all_filter(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
return 1;
}
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
static int upper_device_filter(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
int res;
if (!rdma_ndev)
return 0;
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
if (rdma_ndev == cookie)
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
return 1;
rcu_read_lock();
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
res = rdma_is_upper_dev_rcu(rdma_ndev, cookie);
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
rcu_read_unlock();
return res;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
static void update_gid_ip(enum gid_op_type gid_op,
struct ib_device *ib_dev,
u8 port, struct net_device *ndev,
struct sockaddr *addr)
{
union ib_gid gid;
struct ib_gid_attr gid_attr;
rdma_ip2gid(addr, &gid);
memset(&gid_attr, 0, sizeof(gid_attr));
gid_attr.ndev = ndev;
update_gid(gid_op, ib_dev, port, &gid, &gid_attr);
}
static void enum_netdev_default_gids(struct ib_device *ib_dev,
u8 port, struct net_device *event_ndev,
struct net_device *rdma_ndev)
{
IB/core: Add gid_type to gid attribute In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:47 +08:00
unsigned long gid_type_mask;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
rcu_read_lock();
if (!rdma_ndev ||
((rdma_ndev != event_ndev &&
IB/core: Move rdma_is_upper_dev_rcu to header file In order to validate the route, we need an easy way to check if a net-device belongs to our RDMA device. Move this helper function to a header file in order to make this check easier. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:52 +08:00
!rdma_is_upper_dev_rcu(rdma_ndev, event_ndev)) ||
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
is_eth_active_slave_of_bonding_rcu(rdma_ndev,
netdev_master_upper_dev_get_rcu(rdma_ndev)) ==
BONDING_SLAVE_STATE_INACTIVE)) {
rcu_read_unlock();
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
return;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
}
rcu_read_unlock();
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
IB/core: Add gid_type to gid attribute In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:47 +08:00
gid_type_mask = roce_gid_type_mask_support(ib_dev, port);
ib_cache_gid_set_default_gid(ib_dev, port, rdma_ndev, gid_type_mask,
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
IB_CACHE_GID_DEFAULT_MODE_SET);
}
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
static void bond_delete_netdev_default_gids(struct ib_device *ib_dev,
u8 port,
struct net_device *event_ndev,
struct net_device *rdma_ndev)
{
struct net_device *real_dev = rdma_vlan_dev_real_dev(event_ndev);
IB/core: Fix deleting default GIDs when changing mac adddress Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23 21:58:19 +08:00
unsigned long gid_type_mask;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
if (!rdma_ndev)
return;
if (!real_dev)
real_dev = event_ndev;
rcu_read_lock();
IB/core: Fix deleting default GIDs when changing mac adddress Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23 21:58:19 +08:00
if (((rdma_ndev != event_ndev &&
!rdma_is_upper_dev_rcu(rdma_ndev, event_ndev)) ||
is_eth_active_slave_of_bonding_rcu(rdma_ndev, real_dev)
==
BONDING_SLAVE_STATE_INACTIVE)) {
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
rcu_read_unlock();
IB/core: Fix deleting default GIDs when changing mac adddress Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23 21:58:19 +08:00
return;
}
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
IB/core: Fix deleting default GIDs when changing mac adddress Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23 21:58:19 +08:00
rcu_read_unlock();
IB/core: Add gid_type to gid attribute In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:47 +08:00
IB/core: Fix deleting default GIDs when changing mac adddress Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23 21:58:19 +08:00
gid_type_mask = roce_gid_type_mask_support(ib_dev, port);
ib_cache_gid_set_default_gid(ib_dev, port, rdma_ndev,
gid_type_mask,
IB_CACHE_GID_DEFAULT_MODE_DELETE);
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
static void enum_netdev_ipv4_ips(struct ib_device *ib_dev,
u8 port, struct net_device *ndev)
{
struct in_device *in_dev;
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
struct sin_list {
struct list_head list;
struct sockaddr_in ip;
};
struct sin_list *sin_iter;
struct sin_list *sin_temp;
LIST_HEAD(sin_list);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
if (ndev->reg_state >= NETREG_UNREGISTERING)
return;
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
rcu_read_lock();
in_dev = __in_dev_get_rcu(ndev);
if (!in_dev) {
rcu_read_unlock();
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
return;
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
for_ifa(in_dev) {
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
struct sin_list *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
IB/core: Remove debug prints after allocation failure The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-03 22:44:10 +08:00
if (!entry)
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
continue;
IB/core: Remove debug prints after allocation failure The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-03 22:44:10 +08:00
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
entry->ip.sin_family = AF_INET;
entry->ip.sin_addr.s_addr = ifa->ifa_address;
list_add_tail(&entry->list, &sin_list);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
}
endfor_ifa(in_dev);
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
rcu_read_unlock();
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
IB/core: Fix use after free of ifa When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15 20:01:03 +08:00
list_for_each_entry_safe(sin_iter, sin_temp, &sin_list, list) {
update_gid_ip(GID_ADD, ib_dev, port, ndev,
(struct sockaddr *)&sin_iter->ip);
list_del(&sin_iter->list);
kfree(sin_iter);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
}
static void enum_netdev_ipv6_ips(struct ib_device *ib_dev,
u8 port, struct net_device *ndev)
{
struct inet6_ifaddr *ifp;
struct inet6_dev *in6_dev;
struct sin6_list {
struct list_head list;
struct sockaddr_in6 sin6;
};
struct sin6_list *sin6_iter;
struct sin6_list *sin6_temp;
struct ib_gid_attr gid_attr = {.ndev = ndev};
LIST_HEAD(sin6_list);
if (ndev->reg_state >= NETREG_UNREGISTERING)
return;
in6_dev = in6_dev_get(ndev);
if (!in6_dev)
return;
read_lock_bh(&in6_dev->lock);
list_for_each_entry(ifp, &in6_dev->addr_list, if_list) {
struct sin6_list *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
IB/core: Remove debug prints after allocation failure The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-03 22:44:10 +08:00
if (!entry)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
continue;
entry->sin6.sin6_family = AF_INET6;
entry->sin6.sin6_addr = ifp->addr;
list_add_tail(&entry->list, &sin6_list);
}
read_unlock_bh(&in6_dev->lock);
in6_dev_put(in6_dev);
list_for_each_entry_safe(sin6_iter, sin6_temp, &sin6_list, list) {
union ib_gid gid;
rdma_ip2gid((struct sockaddr *)&sin6_iter->sin6, &gid);
update_gid(GID_ADD, ib_dev, port, &gid, &gid_attr);
list_del(&sin6_iter->list);
kfree(sin6_iter);
}
}
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
static void _add_netdev_ips(struct ib_device *ib_dev, u8 port,
struct net_device *ndev)
{
enum_netdev_ipv4_ips(ib_dev, port, ndev);
if (IS_ENABLED(CONFIG_IPV6))
enum_netdev_ipv6_ips(ib_dev, port, ndev);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
static void add_netdev_ips(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
enum_netdev_default_gids(ib_dev, port, cookie, rdma_ndev);
_add_netdev_ips(ib_dev, port, cookie);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
}
static void del_netdev_ips(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
ib_cache_gid_del_all_netdev_gids(ib_dev, port, cookie);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
}
static void enum_all_gids_of_dev_cb(struct ib_device *ib_dev,
u8 port,
struct net_device *rdma_ndev,
void *cookie)
{
struct net *net;
struct net_device *ndev;
/* Lock the rtnl to make sure the netdevs does not move under
* our feet
*/
rtnl_lock();
net: Introduce net_rwsem to protect net_namespace_list rtnl_lock() is used everywhere, and contention is very high. When someone wants to iterate over alive net namespaces, he/she has no a possibility to do that without exclusive lock. But the exclusive rtnl_lock() in such places is overkill, and it just increases the contention. Yes, there is already for_each_net_rcu() in kernel, but it requires rcu_read_lock(), and this can't be sleepable. Also, sometimes it may be need really prevent net_namespace_list growth, so for_each_net_rcu() is not fit there. This patch introduces new rw_semaphore, which will be used instead of rtnl_mutex to protect net_namespace_list. It is sleepable and allows not-exclusive iterations over net namespaces list. It allows to stop using rtnl_lock() in several places (what is made in next patches) and makes less the time, we keep rtnl_mutex. Here we just add new lock, while the explanation of we can remove rtnl_lock() there are in next patches. Fine grained locks generally are better, then one big lock, so let's do that with net_namespace_list, while the situation allows that. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30 00:20:32 +08:00
down_read(&net_rwsem);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
for_each_net(net)
for_each_netdev(net, ndev)
if (is_eth_port_of_netdev(ib_dev, port, rdma_ndev, ndev))
add_netdev_ips(ib_dev, port, rdma_ndev, ndev);
net: Introduce net_rwsem to protect net_namespace_list rtnl_lock() is used everywhere, and contention is very high. When someone wants to iterate over alive net namespaces, he/she has no a possibility to do that without exclusive lock. But the exclusive rtnl_lock() in such places is overkill, and it just increases the contention. Yes, there is already for_each_net_rcu() in kernel, but it requires rcu_read_lock(), and this can't be sleepable. Also, sometimes it may be need really prevent net_namespace_list growth, so for_each_net_rcu() is not fit there. This patch introduces new rw_semaphore, which will be used instead of rtnl_mutex to protect net_namespace_list. It is sleepable and allows not-exclusive iterations over net namespaces list. It allows to stop using rtnl_lock() in several places (what is made in next patches) and makes less the time, we keep rtnl_mutex. Here we just add new lock, while the explanation of we can remove rtnl_lock() there are in next patches. Fine grained locks generally are better, then one big lock, so let's do that with net_namespace_list, while the situation allows that. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30 00:20:32 +08:00
up_read(&net_rwsem);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
rtnl_unlock();
}
{net, IB}/mlx5: Manage port association for multiport RoCE When mlx5_ib_add is called determine if the mlx5 core device being added is capable of dual port RoCE operation. If it is, determine whether it is a master device or a slave device using the num_vhca_ports and affiliate_nic_vport_criteria capabilities. If the device is a slave, attempt to find a master device to affiliate it with. Devices that can be affiliated will share a system image guid. If none are found place it on a list of unaffiliated ports. If a master is found bind the port to it by configuring the port affiliation in the NIC vport context. Similarly when mlx5_ib_remove is called determine the port type. If it's a slave port, unaffiliate it from the master device, otherwise just remove it from the unaffiliated port list. The IB device is registered as a multiport device, even if a 2nd port is not available for affiliation. When the 2nd port is affiliated later the GID cache must be refreshed in order to get the default GIDs for the 2nd port in the cache. Export roce_rescan_device to provide a mechanism to refresh the cache after a new port is bound. In a multiport configuration all IB object (QP, MR, PD, etc) related commands should flow through the master mlx5_core_dev, other commands must be sent to the slave port mlx5_core_mdev, an interface is provide to get the correct mdev for non IB object commands. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-04 23:25:36 +08:00
/**
* rdma_roce_rescan_device - Rescan all of the network devices in the system
* and add their gids, as needed, to the relevant RoCE devices.
*
* @device: the rdma device
*/
void rdma_roce_rescan_device(struct ib_device *ib_dev)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
{
ib_enum_roce_netdev(ib_dev, pass_all_filter, NULL,
enum_all_gids_of_dev_cb, NULL);
}
{net, IB}/mlx5: Manage port association for multiport RoCE When mlx5_ib_add is called determine if the mlx5 core device being added is capable of dual port RoCE operation. If it is, determine whether it is a master device or a slave device using the num_vhca_ports and affiliate_nic_vport_criteria capabilities. If the device is a slave, attempt to find a master device to affiliate it with. Devices that can be affiliated will share a system image guid. If none are found place it on a list of unaffiliated ports. If a master is found bind the port to it by configuring the port affiliation in the NIC vport context. Similarly when mlx5_ib_remove is called determine the port type. If it's a slave port, unaffiliate it from the master device, otherwise just remove it from the unaffiliated port list. The IB device is registered as a multiport device, even if a 2nd port is not available for affiliation. When the 2nd port is affiliated later the GID cache must be refreshed in order to get the default GIDs for the 2nd port in the cache. Export roce_rescan_device to provide a mechanism to refresh the cache after a new port is bound. In a multiport configuration all IB object (QP, MR, PD, etc) related commands should flow through the master mlx5_core_dev, other commands must be sent to the slave port mlx5_core_mdev, an interface is provide to get the correct mdev for non IB object commands. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-04 23:25:36 +08:00
EXPORT_SYMBOL(rdma_roce_rescan_device);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
static void callback_for_addr_gid_device_scan(struct ib_device *device,
u8 port,
struct net_device *rdma_ndev,
void *cookie)
{
struct update_gid_event_work *parsed = cookie;
return update_gid(parsed->gid_op, device,
port, &parsed->gid,
&parsed->gid_attr);
}
IB/core: Flip to the new dev walk API Convert rdma_is_upper_dev_rcu, handle_netdev_upper and ipoib_get_net_dev_match_addr to the new upper device walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 10:15:46 +08:00
struct upper_list {
struct list_head list;
struct net_device *upper;
};
static int netdev_upper_walk(struct net_device *upper, void *data)
{
struct upper_list *entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
struct list_head *upper_list = data;
Updates for 4.10 kernel merge window - Shared mlx5 updates with net stack (will drop out on merge if Dave's tree has already been merged) - Driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe - Debug cleanups - New connection rejection helpers - SRP updates - Various misc fixes - New paravirt driver from vmware -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJYUbAPAAoJELgmozMOVy/dMXcP/iuG5MNzfN8Ny1JftyBQGWg3 cqoQ2OLj9CsXjwVB+5EqbcZHRZY852lKONaLoDKkIOx4YAXO2YuIKOp944vN7EQx 96wfqzT1F5jzAcy5mYZXgLaStGFDAwejKMqeHd0LfJj3OEtemGnVPWYzyqSQmSKo dzJraS1Z9GIRppzU5WaRpB9PtRBkqIqGJ5vZ0EKLGhed5hYY5r0iMJB0GfriMRDO lJ4UUVfpsAoLPnqDBFH6IMn2V2UeAw9IR5zNa1mrM1RBfvt/uYTxrw1w3p9WoaNs GRodhk4DCeAfeyqzVPNBLyXZ4Zq4FzGe3UWM4qysJ1RR4oFNw9Cuw0Fqk8mrfznr 7hv5TpGIckRZiKf8l6e+qLirF0qGtXJg29j2vPVQI9i5nSj95g1agA81PnLQlLLb flWyxeMj81my7lfMHN1xcV6pqPEKMCOysZmfcvVfJd2XxpjuVD7ekl/YXWp8o8kU YPdQMqPD626XsD8VpPdMszb9FPmx0JD0HEv+Y1rIFX8JegEI+c3H2X0dqC27T/Ou FEPWOy025EgHm0Fh/7eIzkG6tjZ4JHoCugJAcxNZGj2XW4eB6r5vY8UwJ8iQRv+n PVYHiy0UoIRePh0mrdOSSphGZMi/GO/DsqKwCtAMEK43WqZQju6wR7QSIGkh66mp 4uSHJqpf3YEYylxGMhk3 =QeGy -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is the complete update for the rdma stack for this release cycle. Most of it is typical driver and core updates, but there is the entirely new VMWare pvrdma driver. You may have noticed that there were changes in DaveM's pull request to the bnxt Ethernet driver to support a RoCE RDMA driver. The bnxt_re driver was tentatively set to be pulled in this release cycle, but it simply wasn't ready in time and was dropped (a few review comments still to address, and some multi-arch build issues like prefetch() not working across all arches). Summary: - shared mlx5 updates with net stack (will drop out on merge if Dave's tree has already been merged) - driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe - debug cleanups - new connection rejection helpers - SRP updates - various misc fixes - new paravirt driver from vmware" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits) IB: Add vmw_pvrdma driver IB/mlx4: fix improper return value IB/ocrdma: fix bad initialization infiniband: nes: return value of skb_linearize should be handled MAINTAINERS: Update Intel RDMA RNIC driver maintainers MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers IB/core: fix unmap_sg argument qede: fix general protection fault may occur on probe IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc mlx5, calc_sq_size(): Make a debug message more informative mlx5: Remove a set-but-not-used variable mlx5: Use { } instead of { 0 } to init struct IB/srp: Make writing the add_target sysfs attr interruptible IB/srp: Make mapping failures easier to debug IB/srp: Make login failures easier to debug IB/srp: Introduce a local variable in srp_add_one() IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build IB/multicast: Check ib_find_pkey() return value IPoIB: Avoid reading an uninitialized member variable IB/mad: Fix an array index check ...
2016-12-16 04:03:32 +08:00
if (!entry)
IB/core: Flip to the new dev walk API Convert rdma_is_upper_dev_rcu, handle_netdev_upper and ipoib_get_net_dev_match_addr to the new upper device walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 10:15:46 +08:00
return 0;
list_add_tail(&entry->list, upper_list);
dev_hold(upper);
entry->upper = upper;
return 0;
}
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
static void handle_netdev_upper(struct ib_device *ib_dev, u8 port,
void *cookie,
void (*handle_netdev)(struct ib_device *ib_dev,
u8 port,
struct net_device *ndev))
{
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
struct net_device *ndev = cookie;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
struct upper_list *upper_iter;
struct upper_list *upper_temp;
LIST_HEAD(upper_list);
rcu_read_lock();
IB/core: Flip to the new dev walk API Convert rdma_is_upper_dev_rcu, handle_netdev_upper and ipoib_get_net_dev_match_addr to the new upper device walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 10:15:46 +08:00
netdev_walk_all_upper_dev_rcu(ndev, netdev_upper_walk, &upper_list);
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
rcu_read_unlock();
handle_netdev(ib_dev, port, ndev);
list_for_each_entry_safe(upper_iter, upper_temp, &upper_list,
list) {
handle_netdev(ib_dev, port, upper_iter->upper);
dev_put(upper_iter->upper);
list_del(&upper_iter->list);
kfree(upper_iter);
}
}
static void _roce_del_all_netdev_gids(struct ib_device *ib_dev, u8 port,
struct net_device *event_ndev)
{
ib_cache_gid_del_all_netdev_gids(ib_dev, port, event_ndev);
}
static void del_netdev_upper_ips(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
handle_netdev_upper(ib_dev, port, cookie, _roce_del_all_netdev_gids);
}
static void add_netdev_upper_ips(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
handle_netdev_upper(ib_dev, port, cookie, _add_netdev_ips);
}
static void del_netdev_default_ips_join(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev,
void *cookie)
{
struct net_device *master_ndev;
rcu_read_lock();
master_ndev = netdev_master_upper_dev_get_rcu(rdma_ndev);
if (master_ndev)
dev_hold(master_ndev);
rcu_read_unlock();
if (master_ndev) {
bond_delete_netdev_default_gids(ib_dev, port, master_ndev,
rdma_ndev);
dev_put(master_ndev);
}
}
static void del_netdev_default_ips(struct ib_device *ib_dev, u8 port,
struct net_device *rdma_ndev, void *cookie)
{
IB/core: Remove pointer casting from void to net_device This patch avoids unnecessary type casting from void to net_device. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-02 13:14:08 +08:00
bond_delete_netdev_default_gids(ib_dev, port, cookie, rdma_ndev);
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
/* The following functions operate on all IB devices. netdevice_event and
* addr_event execute ib_enum_all_roce_netdevs through a work.
* ib_enum_all_roce_netdevs iterates through all IB devices.
*/
static void netdevice_event_work_handler(struct work_struct *_work)
{
struct netdev_event_work *work =
container_of(_work, struct netdev_event_work, work);
unsigned int i;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
for (i = 0; i < ARRAY_SIZE(work->cmds) && work->cmds[i].cb; i++) {
ib_enum_all_roce_netdevs(work->cmds[i].filter,
work->cmds[i].filter_ndev,
work->cmds[i].cb,
work->cmds[i].ndev);
dev_put(work->cmds[i].ndev);
dev_put(work->cmds[i].filter_ndev);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
kfree(work);
}
static int netdevice_queue_work(struct netdev_event_work_cmd *cmds,
struct net_device *ndev)
{
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
unsigned int i;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
struct netdev_event_work *ndev_work =
kmalloc(sizeof(*ndev_work), GFP_KERNEL);
IB/core: Remove debug prints after allocation failure The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-03 22:44:10 +08:00
if (!ndev_work)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
return NOTIFY_DONE;
memcpy(ndev_work->cmds, cmds, sizeof(ndev_work->cmds));
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
for (i = 0; i < ARRAY_SIZE(ndev_work->cmds) && ndev_work->cmds[i].cb; i++) {
if (!ndev_work->cmds[i].ndev)
ndev_work->cmds[i].ndev = ndev;
if (!ndev_work->cmds[i].filter_ndev)
ndev_work->cmds[i].filter_ndev = ndev;
dev_hold(ndev_work->cmds[i].ndev);
dev_hold(ndev_work->cmds[i].filter_ndev);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
INIT_WORK(&ndev_work->work, netdevice_event_work_handler);
IB/core: Add ordered workqueue for RoCE GID management Currently the RoCE GID management uses the ib_wq to do add and delete new GIDs according to the netdev events. The ib_wq isn't an ordered workqueue and thus two work elements can be executed concurrently which will result in unexpected behavior and inconsistency of the GIDs cache content. Example: ifconfig eth1 11.11.11.11/16 up This command will invoke the following netdev events in the following order: 1. NETDEV_UP 2. NETDEV_DOWN 3. NETDEV_UP If (2) and (3) will be executed concurrently or in reverse order, instead of having a new GID with 11.11.11.11 IP, we will end up without any new GIDs. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-30 14:58:06 +08:00
queue_work(gid_cache_wq, &ndev_work->work);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
return NOTIFY_DONE;
}
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
static const struct netdev_event_work_cmd add_cmd = {
.cb = add_netdev_ips, .filter = is_eth_port_of_netdev};
static const struct netdev_event_work_cmd add_cmd_upper_ips = {
.cb = add_netdev_upper_ips, .filter = is_eth_port_of_netdev};
Changes for 4.3 - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc. mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt 30ZYFuW8evTL+YQcaV65 =EHLg -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-09 23:33:31 +08:00
static void netdevice_event_changeupper(struct netdev_notifier_changeupper_info *changeupper_info,
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
struct netdev_event_work_cmd *cmds)
{
static const struct netdev_event_work_cmd upper_ips_del_cmd = {
.cb = del_netdev_upper_ips, .filter = upper_device_filter};
static const struct netdev_event_work_cmd bonding_default_del_cmd = {
.cb = del_netdev_default_ips, .filter = is_eth_port_inactive_slave};
Changes for 4.3 - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc. mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt 30ZYFuW8evTL+YQcaV65 =EHLg -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-09 23:33:31 +08:00
if (changeupper_info->linking == false) {
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
cmds[0] = upper_ips_del_cmd;
Changes for 4.3 - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc. mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt 30ZYFuW8evTL+YQcaV65 =EHLg -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-09 23:33:31 +08:00
cmds[0].ndev = changeupper_info->upper_dev;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
cmds[1] = add_cmd;
Changes for 4.3 - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc. mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt 30ZYFuW8evTL+YQcaV65 =EHLg -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-09 23:33:31 +08:00
} else {
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
cmds[0] = bonding_default_del_cmd;
Changes for 4.3 - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc. mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt 30ZYFuW8evTL+YQcaV65 =EHLg -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-09 23:33:31 +08:00
cmds[0].ndev = changeupper_info->upper_dev;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
cmds[1] = add_cmd_upper_ips;
Changes for 4.3 - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc. mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt 30ZYFuW8evTL+YQcaV65 =EHLg -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-09 23:33:31 +08:00
cmds[1].ndev = changeupper_info->upper_dev;
cmds[1].filter_ndev = changeupper_info->upper_dev;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
}
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
static int netdevice_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
static const struct netdev_event_work_cmd del_cmd = {
.cb = del_netdev_ips, .filter = pass_all_filter};
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
static const struct netdev_event_work_cmd bonding_default_del_cmd_join = {
.cb = del_netdev_default_ips_join, .filter = is_eth_port_inactive_slave};
static const struct netdev_event_work_cmd default_del_cmd = {
.cb = del_netdev_default_ips, .filter = pass_all_filter};
static const struct netdev_event_work_cmd bonding_event_ips_del_cmd = {
.cb = del_netdev_upper_ips, .filter = upper_device_filter};
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
struct net_device *ndev = netdev_notifier_info_to_dev(ptr);
struct netdev_event_work_cmd cmds[ROCE_NETDEV_CALLBACK_SZ] = { {NULL} };
if (ndev->type != ARPHRD_ETHER)
return NOTIFY_DONE;
switch (event) {
case NETDEV_REGISTER:
case NETDEV_UP:
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
cmds[0] = bonding_default_del_cmd_join;
cmds[1] = add_cmd;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
break;
case NETDEV_UNREGISTER:
if (ndev->reg_state < NETREG_UNREGISTERED)
cmds[0] = del_cmd;
else
return NOTIFY_DONE;
break;
case NETDEV_CHANGEADDR:
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
cmds[0] = default_del_cmd;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
cmds[1] = add_cmd;
break;
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
case NETDEV_CHANGEUPPER:
netdevice_event_changeupper(
Changes for 4.3 - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc. mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt 30ZYFuW8evTL+YQcaV65 =EHLg -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-09 23:33:31 +08:00
container_of(ptr, struct netdev_notifier_changeupper_info, info),
IB/core: Add RoCE table bonding support Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:27 +08:00
cmds);
break;
case NETDEV_BONDING_FAILOVER:
cmds[0] = bonding_event_ips_del_cmd;
cmds[1] = bonding_default_del_cmd_join;
cmds[2] = add_cmd_upper_ips;
break;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
default:
return NOTIFY_DONE;
}
return netdevice_queue_work(cmds, ndev);
}
static void update_gid_event_work_handler(struct work_struct *_work)
{
struct update_gid_event_work *work =
container_of(_work, struct update_gid_event_work, work);
ib_enum_all_roce_netdevs(is_eth_port_of_netdev, work->gid_attr.ndev,
callback_for_addr_gid_device_scan, work);
dev_put(work->gid_attr.ndev);
kfree(work);
}
static int addr_event(struct notifier_block *this, unsigned long event,
struct sockaddr *sa, struct net_device *ndev)
{
struct update_gid_event_work *work;
enum gid_op_type gid_op;
if (ndev->type != ARPHRD_ETHER)
return NOTIFY_DONE;
switch (event) {
case NETDEV_UP:
gid_op = GID_ADD;
break;
case NETDEV_DOWN:
gid_op = GID_DEL;
break;
default:
return NOTIFY_DONE;
}
work = kmalloc(sizeof(*work), GFP_ATOMIC);
IB/core: Remove debug prints after allocation failure The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-03 22:44:10 +08:00
if (!work)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
return NOTIFY_DONE;
INIT_WORK(&work->work, update_gid_event_work_handler);
rdma_ip2gid(sa, &work->gid);
work->gid_op = gid_op;
memset(&work->gid_attr, 0, sizeof(work->gid_attr));
dev_hold(ndev);
work->gid_attr.ndev = ndev;
IB/core: Add ordered workqueue for RoCE GID management Currently the RoCE GID management uses the ib_wq to do add and delete new GIDs according to the netdev events. The ib_wq isn't an ordered workqueue and thus two work elements can be executed concurrently which will result in unexpected behavior and inconsistency of the GIDs cache content. Example: ifconfig eth1 11.11.11.11/16 up This command will invoke the following netdev events in the following order: 1. NETDEV_UP 2. NETDEV_DOWN 3. NETDEV_UP If (2) and (3) will be executed concurrently or in reverse order, instead of having a new GID with 11.11.11.11 IP, we will end up without any new GIDs. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-30 14:58:06 +08:00
queue_work(gid_cache_wq, &work->work);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
return NOTIFY_DONE;
}
static int inetaddr_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
struct sockaddr_in in;
struct net_device *ndev;
struct in_ifaddr *ifa = ptr;
in.sin_family = AF_INET;
in.sin_addr.s_addr = ifa->ifa_address;
ndev = ifa->ifa_dev->dev;
return addr_event(this, event, (struct sockaddr *)&in, ndev);
}
static int inet6addr_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
struct sockaddr_in6 in6;
struct net_device *ndev;
struct inet6_ifaddr *ifa6 = ptr;
in6.sin6_family = AF_INET6;
in6.sin6_addr = ifa6->addr;
ndev = ifa6->idev->dev;
return addr_event(this, event, (struct sockaddr *)&in6, ndev);
}
static struct notifier_block nb_netdevice = {
.notifier_call = netdevice_event
};
static struct notifier_block nb_inetaddr = {
.notifier_call = inetaddr_event
};
static struct notifier_block nb_inet6addr = {
.notifier_call = inet6addr_event
};
int __init roce_gid_mgmt_init(void)
{
IB/core: Add ordered workqueue for RoCE GID management Currently the RoCE GID management uses the ib_wq to do add and delete new GIDs according to the netdev events. The ib_wq isn't an ordered workqueue and thus two work elements can be executed concurrently which will result in unexpected behavior and inconsistency of the GIDs cache content. Example: ifconfig eth1 11.11.11.11/16 up This command will invoke the following netdev events in the following order: 1. NETDEV_UP 2. NETDEV_DOWN 3. NETDEV_UP If (2) and (3) will be executed concurrently or in reverse order, instead of having a new GID with 11.11.11.11 IP, we will end up without any new GIDs. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-30 14:58:06 +08:00
gid_cache_wq = alloc_ordered_workqueue("gid-cache-wq", 0);
if (!gid_cache_wq)
return -ENOMEM;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
register_inetaddr_notifier(&nb_inetaddr);
if (IS_ENABLED(CONFIG_IPV6))
register_inet6addr_notifier(&nb_inet6addr);
/* We relay on the netdevice notifier to enumerate all
* existing devices in the system. Register to this notifier
* last to make sure we will not miss any IP add/del
* callbacks.
*/
register_netdevice_notifier(&nb_netdevice);
return 0;
}
void __exit roce_gid_mgmt_cleanup(void)
{
if (IS_ENABLED(CONFIG_IPV6))
unregister_inet6addr_notifier(&nb_inet6addr);
unregister_inetaddr_notifier(&nb_inetaddr);
unregister_netdevice_notifier(&nb_netdevice);
/* Ensure all gid deletion tasks complete before we go down,
* to avoid any reference to free'd memory. By the time
* ib-core is removed, all physical devices have been removed,
* so no issue with remaining hardware contexts.
*/
IB/core: Add ordered workqueue for RoCE GID management Currently the RoCE GID management uses the ib_wq to do add and delete new GIDs according to the netdev events. The ib_wq isn't an ordered workqueue and thus two work elements can be executed concurrently which will result in unexpected behavior and inconsistency of the GIDs cache content. Example: ifconfig eth1 11.11.11.11/16 up This command will invoke the following netdev events in the following order: 1. NETDEV_UP 2. NETDEV_DOWN 3. NETDEV_UP If (2) and (3) will be executed concurrently or in reverse order, instead of having a new GID with 11.11.11.11 IP, we will end up without any new GIDs. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-30 14:58:06 +08:00
destroy_workqueue(gid_cache_wq);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 23:33:26 +08:00
}