2019-06-04 16:11:33 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
/*
|
|
|
|
* Broadcom BCM7038 style Level 1 interrupt controller driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2014 Broadcom Corporation
|
|
|
|
* Author: Kevin Cernekee
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/irqdomain.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/smp.h>
|
|
|
|
#include <linux/types.h>
|
2015-07-08 05:11:46 +08:00
|
|
|
#include <linux/irqchip.h>
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
#include <linux/irqchip/chained_irq.h>
|
|
|
|
|
|
|
|
#define IRQS_PER_WORD 32
|
|
|
|
#define REG_BYTES_PER_IRQ_WORD (sizeof(u32) * 4)
|
|
|
|
#define MAX_WORDS 8
|
|
|
|
|
|
|
|
struct bcm7038_l1_cpu;
|
|
|
|
|
|
|
|
struct bcm7038_l1_chip {
|
|
|
|
raw_spinlock_t lock;
|
|
|
|
unsigned int n_words;
|
|
|
|
struct irq_domain *domain;
|
|
|
|
struct bcm7038_l1_cpu *cpus[NR_CPUS];
|
|
|
|
u8 affinity[MAX_WORDS * IRQS_PER_WORD];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct bcm7038_l1_cpu {
|
|
|
|
void __iomem *map_base;
|
|
|
|
u32 mask_cache[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* STATUS/MASK_STATUS/MASK_SET/MASK_CLEAR are packed one right after another:
|
|
|
|
*
|
|
|
|
* 7038:
|
|
|
|
* 0x1000_1400: W0_STATUS
|
|
|
|
* 0x1000_1404: W1_STATUS
|
|
|
|
* 0x1000_1408: W0_MASK_STATUS
|
|
|
|
* 0x1000_140c: W1_MASK_STATUS
|
|
|
|
* 0x1000_1410: W0_MASK_SET
|
|
|
|
* 0x1000_1414: W1_MASK_SET
|
|
|
|
* 0x1000_1418: W0_MASK_CLEAR
|
|
|
|
* 0x1000_141c: W1_MASK_CLEAR
|
|
|
|
*
|
|
|
|
* 7445:
|
|
|
|
* 0xf03e_1500: W0_STATUS
|
|
|
|
* 0xf03e_1504: W1_STATUS
|
|
|
|
* 0xf03e_1508: W2_STATUS
|
|
|
|
* 0xf03e_150c: W3_STATUS
|
|
|
|
* 0xf03e_1510: W4_STATUS
|
|
|
|
* 0xf03e_1514: W0_MASK_STATUS
|
|
|
|
* 0xf03e_1518: W1_MASK_STATUS
|
|
|
|
* [...]
|
|
|
|
*/
|
|
|
|
|
|
|
|
static inline unsigned int reg_status(struct bcm7038_l1_chip *intc,
|
|
|
|
unsigned int word)
|
|
|
|
{
|
|
|
|
return (0 * intc->n_words + word) * sizeof(u32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int reg_mask_status(struct bcm7038_l1_chip *intc,
|
|
|
|
unsigned int word)
|
|
|
|
{
|
|
|
|
return (1 * intc->n_words + word) * sizeof(u32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int reg_mask_set(struct bcm7038_l1_chip *intc,
|
|
|
|
unsigned int word)
|
|
|
|
{
|
|
|
|
return (2 * intc->n_words + word) * sizeof(u32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int reg_mask_clr(struct bcm7038_l1_chip *intc,
|
|
|
|
unsigned int word)
|
|
|
|
{
|
|
|
|
return (3 * intc->n_words + word) * sizeof(u32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 l1_readl(void __iomem *reg)
|
|
|
|
{
|
|
|
|
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
|
|
|
|
return ioread32be(reg);
|
|
|
|
else
|
|
|
|
return readl(reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void l1_writel(u32 val, void __iomem *reg)
|
|
|
|
{
|
|
|
|
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
|
|
|
|
iowrite32be(val, reg);
|
|
|
|
else
|
|
|
|
writel(val, reg);
|
|
|
|
}
|
|
|
|
|
2015-09-14 16:42:37 +08:00
|
|
|
static void bcm7038_l1_irq_handle(struct irq_desc *desc)
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
{
|
|
|
|
struct bcm7038_l1_chip *intc = irq_desc_get_handler_data(desc);
|
|
|
|
struct bcm7038_l1_cpu *cpu;
|
|
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
|
|
unsigned int idx;
|
|
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
cpu = intc->cpus[cpu_logical_map(smp_processor_id())];
|
|
|
|
#else
|
|
|
|
cpu = intc->cpus[0];
|
|
|
|
#endif
|
|
|
|
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
|
|
|
|
for (idx = 0; idx < intc->n_words; idx++) {
|
|
|
|
int base = idx * IRQS_PER_WORD;
|
|
|
|
unsigned long pending, flags;
|
|
|
|
int hwirq;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&intc->lock, flags);
|
|
|
|
pending = l1_readl(cpu->map_base + reg_status(intc, idx)) &
|
|
|
|
~cpu->mask_cache[idx];
|
|
|
|
raw_spin_unlock_irqrestore(&intc->lock, flags);
|
|
|
|
|
|
|
|
for_each_set_bit(hwirq, &pending, IRQS_PER_WORD) {
|
|
|
|
generic_handle_irq(irq_find_mapping(intc->domain,
|
|
|
|
base + hwirq));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
chained_irq_exit(chip, desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __bcm7038_l1_unmask(struct irq_data *d, unsigned int cpu_idx)
|
|
|
|
{
|
|
|
|
struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 word = d->hwirq / IRQS_PER_WORD;
|
|
|
|
u32 mask = BIT(d->hwirq % IRQS_PER_WORD);
|
|
|
|
|
|
|
|
intc->cpus[cpu_idx]->mask_cache[word] &= ~mask;
|
|
|
|
l1_writel(mask, intc->cpus[cpu_idx]->map_base +
|
|
|
|
reg_mask_clr(intc, word));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __bcm7038_l1_mask(struct irq_data *d, unsigned int cpu_idx)
|
|
|
|
{
|
|
|
|
struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 word = d->hwirq / IRQS_PER_WORD;
|
|
|
|
u32 mask = BIT(d->hwirq % IRQS_PER_WORD);
|
|
|
|
|
|
|
|
intc->cpus[cpu_idx]->mask_cache[word] |= mask;
|
|
|
|
l1_writel(mask, intc->cpus[cpu_idx]->map_base +
|
|
|
|
reg_mask_set(intc, word));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bcm7038_l1_unmask(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&intc->lock, flags);
|
|
|
|
__bcm7038_l1_unmask(d, intc->affinity[d->hwirq]);
|
|
|
|
raw_spin_unlock_irqrestore(&intc->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bcm7038_l1_mask(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&intc->lock, flags);
|
|
|
|
__bcm7038_l1_mask(d, intc->affinity[d->hwirq]);
|
|
|
|
raw_spin_unlock_irqrestore(&intc->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bcm7038_l1_set_affinity(struct irq_data *d,
|
|
|
|
const struct cpumask *dest,
|
|
|
|
bool force)
|
|
|
|
{
|
|
|
|
struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
|
|
|
|
unsigned long flags;
|
|
|
|
irq_hw_number_t hw = d->hwirq;
|
|
|
|
u32 word = hw / IRQS_PER_WORD;
|
|
|
|
u32 mask = BIT(hw % IRQS_PER_WORD);
|
|
|
|
unsigned int first_cpu = cpumask_any_and(dest, cpu_online_mask);
|
|
|
|
bool was_disabled;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&intc->lock, flags);
|
|
|
|
|
|
|
|
was_disabled = !!(intc->cpus[intc->affinity[hw]]->mask_cache[word] &
|
|
|
|
mask);
|
|
|
|
__bcm7038_l1_mask(d, intc->affinity[hw]);
|
|
|
|
intc->affinity[hw] = first_cpu;
|
|
|
|
if (!was_disabled)
|
|
|
|
__bcm7038_l1_unmask(d, first_cpu);
|
|
|
|
|
|
|
|
raw_spin_unlock_irqrestore(&intc->lock, flags);
|
2017-08-18 16:39:21 +08:00
|
|
|
irq_data_update_effective_affinity(d, cpumask_of(first_cpu));
|
|
|
|
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-08-09 16:59:01 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2016-11-01 05:17:35 +08:00
|
|
|
static void bcm7038_l1_cpu_offline(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct cpumask *mask = irq_data_get_affinity_mask(d);
|
|
|
|
int cpu = smp_processor_id();
|
|
|
|
cpumask_t new_affinity;
|
|
|
|
|
|
|
|
/* This CPU was not on the affinity mask */
|
|
|
|
if (!cpumask_test_cpu(cpu, mask))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (cpumask_weight(mask) > 1) {
|
|
|
|
/*
|
|
|
|
* Multiple CPU affinity, remove this CPU from the affinity
|
|
|
|
* mask
|
|
|
|
*/
|
|
|
|
cpumask_copy(&new_affinity, mask);
|
|
|
|
cpumask_clear_cpu(cpu, &new_affinity);
|
|
|
|
} else {
|
|
|
|
/* Only CPU, put on the lowest online CPU */
|
|
|
|
cpumask_clear(&new_affinity);
|
|
|
|
cpumask_set_cpu(cpumask_first(cpu_online_mask), &new_affinity);
|
|
|
|
}
|
|
|
|
irq_set_affinity_locked(d, &new_affinity, false);
|
|
|
|
}
|
2018-08-09 16:59:01 +08:00
|
|
|
#endif
|
2016-11-01 05:17:35 +08:00
|
|
|
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
static int __init bcm7038_l1_init_one(struct device_node *dn,
|
|
|
|
unsigned int idx,
|
|
|
|
struct bcm7038_l1_chip *intc)
|
|
|
|
{
|
|
|
|
struct resource res;
|
|
|
|
resource_size_t sz;
|
|
|
|
struct bcm7038_l1_cpu *cpu;
|
|
|
|
unsigned int i, n_words, parent_irq;
|
|
|
|
|
|
|
|
if (of_address_to_resource(dn, idx, &res))
|
|
|
|
return -EINVAL;
|
|
|
|
sz = resource_size(&res);
|
|
|
|
n_words = sz / REG_BYTES_PER_IRQ_WORD;
|
|
|
|
|
|
|
|
if (n_words > MAX_WORDS)
|
|
|
|
return -EINVAL;
|
|
|
|
else if (!intc->n_words)
|
|
|
|
intc->n_words = n_words;
|
|
|
|
else if (intc->n_words != n_words)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
cpu = intc->cpus[idx] = kzalloc(sizeof(*cpu) + n_words * sizeof(u32),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!cpu)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
cpu->map_base = ioremap(res.start, sz);
|
|
|
|
if (!cpu->map_base)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (i = 0; i < n_words; i++) {
|
|
|
|
l1_writel(0xffffffff, cpu->map_base + reg_mask_set(intc, i));
|
|
|
|
cpu->mask_cache[i] = 0xffffffff;
|
|
|
|
}
|
|
|
|
|
|
|
|
parent_irq = irq_of_parse_and_map(dn, idx);
|
|
|
|
if (!parent_irq) {
|
|
|
|
pr_err("failed to map parent interrupt %d\n", parent_irq);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2024-06-11 20:08:33 +08:00
|
|
|
|
|
|
|
if (of_property_read_bool(dn, "brcm,irq-can-wake"))
|
|
|
|
enable_irq_wake(parent_irq);
|
|
|
|
|
irqchip/bcm7038-l1: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.
Search and conversion was done with coccinelle:
@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
- BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);
@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
- BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
2015-06-22 03:10:50 +08:00
|
|
|
irq_set_chained_handler_and_data(parent_irq, bcm7038_l1_irq_handle,
|
|
|
|
intc);
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip bcm7038_l1_irq_chip = {
|
|
|
|
.name = "bcm7038-l1",
|
|
|
|
.irq_mask = bcm7038_l1_mask,
|
|
|
|
.irq_unmask = bcm7038_l1_unmask,
|
|
|
|
.irq_set_affinity = bcm7038_l1_set_affinity,
|
2018-08-09 16:59:01 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2016-11-01 05:17:35 +08:00
|
|
|
.irq_cpu_offline = bcm7038_l1_cpu_offline,
|
2018-08-09 16:59:01 +08:00
|
|
|
#endif
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static int bcm7038_l1_map(struct irq_domain *d, unsigned int virq,
|
|
|
|
irq_hw_number_t hw_irq)
|
|
|
|
{
|
|
|
|
irq_set_chip_and_handler(virq, &bcm7038_l1_irq_chip, handle_level_irq);
|
|
|
|
irq_set_chip_data(virq, d->host_data);
|
2017-08-18 16:39:21 +08:00
|
|
|
irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(virq)));
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct irq_domain_ops bcm7038_l1_domain_ops = {
|
|
|
|
.xlate = irq_domain_xlate_onecell,
|
|
|
|
.map = bcm7038_l1_map,
|
|
|
|
};
|
|
|
|
|
|
|
|
int __init bcm7038_l1_of_init(struct device_node *dn,
|
|
|
|
struct device_node *parent)
|
|
|
|
{
|
|
|
|
struct bcm7038_l1_chip *intc;
|
|
|
|
int idx, ret;
|
|
|
|
|
|
|
|
intc = kzalloc(sizeof(*intc), GFP_KERNEL);
|
|
|
|
if (!intc)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
raw_spin_lock_init(&intc->lock);
|
|
|
|
for_each_possible_cpu(idx) {
|
|
|
|
ret = bcm7038_l1_init_one(dn, idx, intc);
|
|
|
|
if (ret < 0) {
|
|
|
|
if (idx)
|
|
|
|
break;
|
|
|
|
pr_err("failed to remap intc L1 registers\n");
|
|
|
|
goto out_free;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
intc->domain = irq_domain_add_linear(dn, IRQS_PER_WORD * intc->n_words,
|
|
|
|
&bcm7038_l1_domain_ops,
|
|
|
|
intc);
|
|
|
|
if (!intc->domain) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out_unmap;
|
|
|
|
}
|
|
|
|
|
2019-03-21 03:39:19 +08:00
|
|
|
pr_info("registered BCM7038 L1 intc (%pOF, IRQs: %d)\n",
|
|
|
|
dn, IRQS_PER_WORD * intc->n_words);
|
|
|
|
|
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers
This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:
- 64 to 160+ level IRQs
- Atomic set/clear registers
- Reasonably predictable register layout (N status words, then N
mask status words, then N mask set words, then N mask clear words)
- SMP affinity supported on most systems
- Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3
This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block. Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.
The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead. So this driver is primarily intended for MIPS STB chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_unmap:
|
|
|
|
for_each_possible_cpu(idx) {
|
|
|
|
struct bcm7038_l1_cpu *cpu = intc->cpus[idx];
|
|
|
|
|
|
|
|
if (cpu) {
|
|
|
|
if (cpu->map_base)
|
|
|
|
iounmap(cpu->map_base);
|
|
|
|
kfree(cpu);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
out_free:
|
|
|
|
kfree(intc);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
IRQCHIP_DECLARE(bcm7038_l1, "brcm,bcm7038-l1-intc", bcm7038_l1_of_init);
|