OpenCloudOS-Kernel/include/uapi/linux/fs.h

365 lines
14 KiB
C
Raw Normal View History

#ifndef _UAPI_LINUX_FS_H
#define _UAPI_LINUX_FS_H
/*
* This file has definitions for some important file table structures
* and constants and structures used by various generic file system
* ioctl's. Please do not make any changes in this file before
* sending patches for review to linux-fsdevel@vger.kernel.org and
* linux-api@vger.kernel.org.
*/
#include <linux/limits.h>
#include <linux/ioctl.h>
#include <linux/types.h>
/*
* It's silly to have NR_OPEN bigger than NR_FILE, but you can change
* the file limit at runtime and only root can increase the per-process
* nr_file rlimit, so it's safe to set up a ridiculously high absolute
* upper limit on files-per-process.
*
* Some programs (notably those using select()) may have to be
* recompiled to take full advantage of the new limits..
*/
/* Fixed constants first: */
#undef NR_OPEN
#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
#define BLOCK_SIZE_BITS 10
#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
#define SEEK_SET 0 /* seek relative to beginning of file */
#define SEEK_CUR 1 /* seek relative to current file position */
#define SEEK_END 2 /* seek relative to end of file */
#define SEEK_DATA 3 /* seek to the next data */
#define SEEK_HOLE 4 /* seek to the next hole */
#define SEEK_MAX SEEK_HOLE
#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */
#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */
#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */
struct file_clone_range {
__s64 src_fd;
__u64 src_offset;
__u64 src_length;
__u64 dest_offset;
};
struct fstrim_range {
__u64 start;
__u64 len;
__u64 minlen;
};
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
#define FILE_DEDUPE_RANGE_SAME 0
#define FILE_DEDUPE_RANGE_DIFFERS 1
/* from struct btrfs_ioctl_file_extent_same_info */
struct file_dedupe_range_info {
__s64 dest_fd; /* in - destination file */
__u64 dest_offset; /* in - start of extent in destination */
__u64 bytes_deduped; /* out - total # of bytes we were able
* to dedupe from this file. */
/* status of this dedupe operation:
* < 0 for error
* == FILE_DEDUPE_RANGE_SAME if dedupe succeeds
* == FILE_DEDUPE_RANGE_DIFFERS if data differs
*/
__s32 status; /* out - see above description */
__u32 reserved; /* must be zero */
};
/* from struct btrfs_ioctl_file_extent_same_args */
struct file_dedupe_range {
__u64 src_offset; /* in - start of extent in source */
__u64 src_length; /* in - length of extent */
__u16 dest_count; /* in - total elements in info array */
__u16 reserved1; /* must be zero */
__u32 reserved2; /* must be zero */
struct file_dedupe_range_info info[0];
};
/* And dynamically-tunable limits and defaults: */
struct files_stat_struct {
unsigned long nr_files; /* read only */
unsigned long nr_free_files; /* read only */
unsigned long max_files; /* tunable */
};
struct inodes_stat_t {
fs: bump inode and dentry counters to long This series reworks our current object cache shrinking infrastructure in two main ways: * Noticing that a lot of users copy and paste their own version of LRU lists for objects, we put some effort in providing a generic version. It is modeled after the filesystem users: dentries, inodes, and xfs (for various tasks), but we expect that other users could benefit in the near future with little or no modification. Let us know if you have any issues. * The underlying list_lru being proposed automatically and transparently keeps the elements in per-node lists, and is able to manipulate the node lists individually. Given this infrastructure, we are able to modify the up-to-now hammer called shrink_slab to proceed with node-reclaim instead of always searching memory from all over like it has been doing. Per-node lru lists are also expected to lead to less contention in the lru locks on multi-node scans, since we are now no longer fighting for a global lock. The locks usually disappear from the profilers with this change. Although we have no official benchmarks for this version - be our guest to independently evaluate this - earlier versions of this series were performance tested (details at http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no visible performance regressions while yielding a better qualitative behavior in NUMA machines. With this infrastructure in place, we can use the list_lru entry point to provide memcg isolation and per-memcg targeted reclaim. Historically, those two pieces of work have been posted together. This version presents only the infrastructure work, deferring the memcg work for a later time, so we can focus on getting this part tested. You can see more about the history of such work at http://lwn.net/Articles/552769/ Dave Chinner (18): dcache: convert dentry_stat.nr_unused to per-cpu counters dentry: move to per-sb LRU locks dcache: remove dentries from LRU before putting on dispose list mm: new shrinker API shrinker: convert superblock shrinkers to new API list: add a new LRU list type inode: convert inode lru list to generic lru list code. dcache: convert to use new lru list infrastructure list_lru: per-node list infrastructure shrinker: add node awareness fs: convert inode and dentry shrinking to be node aware xfs: convert buftarg LRU to generic code xfs: rework buffer dispose list tracking xfs: convert dquot cache lru to list_lru fs: convert fs shrinkers to new scan/count API drivers: convert shrinkers to new count/scan API shrinker: convert remaining shrinkers to count/scan API shrinker: Kill old ->shrink API. Glauber Costa (7): fs: bump inode and dentry counters to long super: fix calculation of shrinkable objects for small numbers list_lru: per-node API vmscan: per-node deferred work i915: bail out earlier when shrinker cannot acquire mutex hugepage: convert huge zero page shrinker to new shrinker API list_lru: dynamically adjust node arrays This patch: There are situations in very large machines in which we can have a large quantity of dirty inodes, unused dentries, etc. This is particularly true when umounting a filesystem, where eventually since every live object will eventually be discarded. Dave Chinner reported a problem with this while experimenting with the shrinker revamp patchset. So we believe it is time for a change. This patch just moves int to longs. Machines where it matters should have a big long anyway. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <dchinner@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:17:53 +08:00
long nr_inodes;
long nr_unused;
long dummy[5]; /* padding for sysctl ABI compatibility */
};
#define NR_FILE 8192 /* this can well be larger on a larger system */
/*
* These are the fs-independent mount-flags: up to 32 flags are supported
*/
#define MS_RDONLY 1 /* Mount read-only */
#define MS_NOSUID 2 /* Ignore suid and sgid bits */
#define MS_NODEV 4 /* Disallow access to device special files */
#define MS_NOEXEC 8 /* Disallow program execution */
#define MS_SYNCHRONOUS 16 /* Writes are synced at once */
#define MS_REMOUNT 32 /* Alter flags of a mounted FS */
#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */
#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
#define MS_NOATIME 1024 /* Do not update access times. */
#define MS_NODIRATIME 2048 /* Do not update directory access times */
#define MS_BIND 4096
#define MS_MOVE 8192
#define MS_REC 16384
#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence.
MS_VERBOSE is deprecated. */
#define MS_SILENT 32768
#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */
#define MS_UNBINDABLE (1<<17) /* change to unbindable */
#define MS_PRIVATE (1<<18) /* change to private */
#define MS_SLAVE (1<<19) /* change to slave */
#define MS_SHARED (1<<20) /* change to shared */
#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */
#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
#define MS_I_VERSION (1<<23) /* Update inode I_version field */
#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
#define MS_LAZYTIME (1<<25) /* Update the on-disk [acm]times lazily */
/* These sb flags are internal to the kernel */
fs: Better permission checking for submounts To support unprivileged users mounting filesystems two permission checks have to be performed: a test to see if the user allowed to create a mount in the mount namespace, and a test to see if the user is allowed to access the specified filesystem. The automount case is special in that mounting the original filesystem grants permission to mount the sub-filesystems, to any user who happens to stumble across the their mountpoint and satisfies the ordinary filesystem permission checks. Attempting to handle the automount case by using override_creds almost works. It preserves the idea that permission to mount the original filesystem is permission to mount the sub-filesystem. Unfortunately using override_creds messes up the filesystems ordinary permission checks. Solve this by being explicit that a mount is a submount by introducing vfs_submount, and using it where appropriate. vfs_submount uses a new mount internal mount flags MS_SUBMOUNT, to let sget and friends know that a mount is a submount so they can take appropriate action. sget and sget_userns are modified to not perform any permission checks on submounts. follow_automount is modified to stop using override_creds as that has proven problemantic. do_mount is modified to always remove the new MS_SUBMOUNT flag so that we know userspace will never by able to specify it. autofs4 is modified to stop using current_real_cred that was put in there to handle the previous version of submount permission checking. cifs is modified to pass the mountpoint all of the way down to vfs_submount. debugfs is modified to pass the mountpoint all of the way down to trace_automount by adding a new parameter. To make this change easier a new typedef debugfs_automount_t is introduced to capture the type of the debugfs automount function. Cc: stable@vger.kernel.org Fixes: 069d5ac9ae0d ("autofs: Fix automounts by using current_real_cred()->uid") Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds") Reviewed-by: Trond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-02-01 01:06:16 +08:00
#define MS_SUBMOUNT (1<<26)
#define MS_NOREMOTELOCK (1<<27)
#define MS_NOSEC (1<<28)
#define MS_BORN (1<<29)
#define MS_ACTIVE (1<<30)
#define MS_NOUSER (1<<31)
/*
* Superblock flags that can be altered by MS_REMOUNT
*/
#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION|\
MS_LAZYTIME)
/*
* Old magic mount flag and mask
*/
#define MS_MGC_VAL 0xC0ED0000
#define MS_MGC_MSK 0xffff0000
/*
* Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR.
*/
struct fsxattr {
__u32 fsx_xflags; /* xflags field value (get/set) */
__u32 fsx_extsize; /* extsize field value (get/set)*/
__u32 fsx_nextents; /* nextents field value (get) */
__u32 fsx_projid; /* project identifier (get/set) */
__u32 fsx_cowextsize; /* CoW extsize field value (get/set)*/
unsigned char fsx_pad[8];
};
/*
* Flags for the fsx_xflags field
*/
#define FS_XFLAG_REALTIME 0x00000001 /* data in realtime volume */
#define FS_XFLAG_PREALLOC 0x00000002 /* preallocated file extents */
#define FS_XFLAG_IMMUTABLE 0x00000008 /* file cannot be modified */
#define FS_XFLAG_APPEND 0x00000010 /* all writes append */
#define FS_XFLAG_SYNC 0x00000020 /* all writes synchronous */
#define FS_XFLAG_NOATIME 0x00000040 /* do not update access time */
#define FS_XFLAG_NODUMP 0x00000080 /* do not include in backups */
#define FS_XFLAG_RTINHERIT 0x00000100 /* create with rt bit set */
#define FS_XFLAG_PROJINHERIT 0x00000200 /* create with parents projid */
#define FS_XFLAG_NOSYMLINKS 0x00000400 /* disallow symlink creation */
#define FS_XFLAG_EXTSIZE 0x00000800 /* extent size allocator hint */
#define FS_XFLAG_EXTSZINHERIT 0x00001000 /* inherit inode extent size */
#define FS_XFLAG_NODEFRAG 0x00002000 /* do not defragment */
#define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */
#define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */
#define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */
#define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */
/* the read-only stuff doesn't really belong here, but any other place is
probably as bad and I don't want to create yet another include file. */
#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
#define BLKRRPART _IO(0x12,95) /* re-read partition table */
#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
#if 0
#define BLKPG _IO(0x12,105)/* See blkpg.h */
/* Some people are morons. Do not use sizeof! */
#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
/* This was here just to show that the number is taken -
probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
#endif
/* A jump here: 108-111 have been used for various private purposes. */
#define BLKBSZGET _IOR(0x12,112,size_t)
#define BLKBSZSET _IOW(0x12,113,size_t)
#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
#define BLKTRACESTART _IO(0x12,116)
#define BLKTRACESTOP _IO(0x12,117)
#define BLKTRACETEARDOWN _IO(0x12,118)
#define BLKDISCARD _IO(0x12,119)
#define BLKIOMIN _IO(0x12,120)
#define BLKIOOPT _IO(0x12,121)
#define BLKALIGNOFF _IO(0x12,122)
#define BLKPBSZGET _IO(0x12,123)
#define BLKDISCARDZEROES _IO(0x12,124)
#define BLKSECDISCARD _IO(0x12,125)
#define BLKROTATIONAL _IO(0x12,126)
#define BLKZEROOUT _IO(0x12,127)
/*
* A jump here: 130-131 are reserved for zoned block devices
* (see uapi/linux/blkzoned.h)
*/
#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
#define FIBMAP _IO(0x00,1) /* bmap access */
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
#define FITHAW _IOWR('X', 120, int) /* Thaw */
#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
#define FICLONE _IOW(0x94, 9, int)
#define FICLONERANGE _IOW(0x94, 13, struct file_clone_range)
#define FIDEDUPERANGE _IOWR(0x94, 54, struct file_dedupe_range)
#define FS_IOC_GETFLAGS _IOR('f', 1, long)
#define FS_IOC_SETFLAGS _IOW('f', 2, long)
#define FS_IOC_GETVERSION _IOR('v', 1, long)
#define FS_IOC_SETVERSION _IOW('v', 2, long)
#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
#define FS_IOC32_GETVERSION _IOR('v', 1, int)
#define FS_IOC32_SETVERSION _IOW('v', 2, int)
#define FS_IOC_FSGETXATTR _IOR ('X', 31, struct fsxattr)
#define FS_IOC_FSSETXATTR _IOW ('X', 32, struct fsxattr)
/*
* File system encryption support
*/
/* Policy provided via an ioctl on the topmost directory */
#define FS_KEY_DESCRIPTOR_SIZE 8
#define FS_POLICY_FLAGS_PAD_4 0x00
#define FS_POLICY_FLAGS_PAD_8 0x01
#define FS_POLICY_FLAGS_PAD_16 0x02
#define FS_POLICY_FLAGS_PAD_32 0x03
#define FS_POLICY_FLAGS_PAD_MASK 0x03
#define FS_POLICY_FLAGS_VALID 0x03
/* Encryption algorithms */
#define FS_ENCRYPTION_MODE_INVALID 0
#define FS_ENCRYPTION_MODE_AES_256_XTS 1
#define FS_ENCRYPTION_MODE_AES_256_GCM 2
#define FS_ENCRYPTION_MODE_AES_256_CBC 3
#define FS_ENCRYPTION_MODE_AES_256_CTS 4
struct fscrypt_policy {
__u8 version;
__u8 contents_encryption_mode;
__u8 filenames_encryption_mode;
__u8 flags;
__u8 master_key_descriptor[FS_KEY_DESCRIPTOR_SIZE];
};
#define FS_IOC_SET_ENCRYPTION_POLICY _IOR('f', 19, struct fscrypt_policy)
#define FS_IOC_GET_ENCRYPTION_PWSALT _IOW('f', 20, __u8[16])
#define FS_IOC_GET_ENCRYPTION_POLICY _IOW('f', 21, struct fscrypt_policy)
/* Parameters for passing an encryption key into the kernel keyring */
#define FS_KEY_DESC_PREFIX "fscrypt:"
#define FS_KEY_DESC_PREFIX_SIZE 8
/* Structure that userspace passes to the kernel keyring */
#define FS_MAX_KEY_SIZE 64
struct fscrypt_key {
__u32 mode;
__u8 raw[FS_MAX_KEY_SIZE];
__u32 size;
};
/*
* Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
*
* Note: for historical reasons, these flags were originally used and
* defined for use by ext2/ext3, and then other file systems started
* using these flags so they wouldn't need to write their own version
* of chattr/lsattr (which was shipped as part of e2fsprogs). You
* should think twice before trying to use these flags in new
* contexts, or trying to assign these flags, since they are used both
* as the UAPI and the on-disk encoding for ext2/3/4. Also, we are
* almost out of 32-bit flags. :-)
*
* We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from
* XFS to the generic FS level interface. This uses a structure that
* has padding and hence has more room to grow, so it may be more
* appropriate for many new use cases.
*
* Please do not change these flags or interfaces before checking with
* linux-fsdevel@vger.kernel.org and linux-api@vger.kernel.org.
*/
#define FS_SECRM_FL 0x00000001 /* Secure deletion */
#define FS_UNRM_FL 0x00000002 /* Undelete */
#define FS_COMPR_FL 0x00000004 /* Compress file */
#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
#define FS_NODUMP_FL 0x00000040 /* do not dump file */
#define FS_NOATIME_FL 0x00000080 /* do not update atime */
/* Reserved for compression usage... */
#define FS_DIRTY_FL 0x00000100
#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
/* End compression flags --- maybe not all used */
#define FS_ENCRYPT_FL 0x00000800 /* Encrypted file */
#define FS_BTREE_FL 0x00001000 /* btree format dir */
#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
#define FS_HUGE_FILE_FL 0x00040000 /* Reserved for ext4 */
#define FS_EXTENT_FL 0x00080000 /* Extents */
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
#define SYNC_FILE_RANGE_WAIT_BEFORE 1
#define SYNC_FILE_RANGE_WRITE 2
#define SYNC_FILE_RANGE_WAIT_AFTER 4
/* flags for preadv2/pwritev2: */
#define RWF_HIPRI 0x00000001 /* high priority request, poll if possible */
#define RWF_DSYNC 0x00000002 /* per-IO O_DSYNC */
#define RWF_SYNC 0x00000004 /* per-IO O_SYNC */
#endif /* _UAPI_LINUX_FS_H */