UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/asm-x86_64/proto.h

130 lines
3.3 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef _ASM_X8664_PROTO_H
#define _ASM_X8664_PROTO_H 1
#include <asm/ldt.h>
/* misc architecture specific prototypes */
struct cpuinfo_x86;
struct pt_regs;
extern void start_kernel(void);
extern void pda_init(int);
[PATCH] x86_64: Unmap NULL during early bootup We should zap the low mappings, as soon as possible, so that we can catch kernel bugs more effectively. Previously early boot had NULL mapped and didn't trap on NULL references. This patch introduces boot_level4_pgt, which will always have low identity addresses mapped. Druing boot, all the processors will use this as their level4 pgt. On BP, we will switch to init_level4_pgt as soon as we enter C code and zap the low mappings as soon as we are done with the usage of identity low mapped addresses. On AP's we will zap the low mappings as soon as we jump to C code. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 00:25:53 +08:00
extern void zap_low_mappings(int cpu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void early_idt_handler(void);
extern void mcheck_init(struct cpuinfo_x86 *c);
[PATCH] MTRR suspend/resume cleanup There has been some discuss about solving the SMP MTRR suspend/resume breakage, but I didn't find a patch for it. This is an intent for it. The basic idea is moving mtrr initializing into cpu_identify for all APs (so it works for cpu hotplug). For BP, restore_processor_state is responsible for restoring MTRR. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-08 08:56:38 +08:00
#ifdef CONFIG_MTRR
extern void mtrr_ap_init(void);
extern void mtrr_bp_init(void);
#else
#define mtrr_ap_init() do {} while (0)
#define mtrr_bp_init() do {} while (0)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void init_memory_mapping(unsigned long start, unsigned long end);
extern void system_call(void);
extern int kernel_syscall(void);
extern void syscall_init(void);
extern void ia32_syscall(void);
extern void ia32_cstar_target(void);
extern void ia32_sysenter_target(void);
extern void config_acpi_tables(void);
extern void ia32_syscall(void);
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 12:53:28 +08:00
extern int pmtimer_mark_offset(void);
[PATCH] x86_64: [PATCH] timer resume At resume time, TSC's value or something similar might be changed a lot against suspend time. This could make system gets a very big lost ticks. See http://bugzilla.kernel.org/show_bug.cgi?id=5825 Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04 04:50:56 +08:00
extern void pmtimer_resume(void);
[PATCH] x86_64: Calibrate APIC timer using PM timer On some broken motherboards (at least one NForce3 based AMD64 laptop) the PIT timer runs at a incorrect frequency. This patch adds a new option "apicpmtimer" that allows to use the APIC timer and calibrate it using the PMTimer. It requires the earlier patch that allows to run the main timer from the APIC. Specifying apicpmtimer implies apicmaintimer. The option defaults to off for now. I tested it on a few systems and the resulting APIC timer frequencies were usually a bit off, but always <1%, which should be tolerable. TBD figure out heuristic to enable this automatically on the affected systems TBD perhaps do it on all NForce3s or using DMI? Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04 04:51:41 +08:00
extern void pmtimer_wait(unsigned);
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 12:53:28 +08:00
extern unsigned int do_gettimeoffset_pm(void);
[PATCH] x86_64: Define pmtmr_ioport to 0 when PM_TIMER is not available Avoids some ifdef mess later. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04 04:50:44 +08:00
#ifdef CONFIG_X86_PM_TIMER
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 12:53:28 +08:00
extern u32 pmtmr_ioport;
[PATCH] x86_64: Define pmtmr_ioport to 0 when PM_TIMER is not available Avoids some ifdef mess later. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04 04:50:44 +08:00
#else
#define pmtmr_ioport 0
#endif
[PATCH] x86_64: Allow to run main time keeping from the local APIC interrupt Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04 04:50:50 +08:00
extern int nohpet;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void early_printk(const char *fmt, ...) __attribute__((format(printf,1,2)));
extern void early_identify_cpu(struct cpuinfo_x86 *c);
extern int k8_scan_nodes(unsigned long start, unsigned long end);
extern void numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn);
extern unsigned long numa_free_all_bootmem(void);
extern void reserve_bootmem_generic(unsigned long phys, unsigned len);
extern void load_gs_index(unsigned gs);
[PATCH] x86_64: Allow to run main time keeping from the local APIC interrupt Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04 04:50:50 +08:00
extern void stop_timer_interrupt(void);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
extern void main_timer_handler(void);
[PATCH] x86_64: Allow to run main time keeping from the local APIC interrupt Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04 04:50:50 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern unsigned long end_pfn_map;
[PATCH] x86_64: reliable stack trace support (x86-64) These are the x86_64-specific pieces to enable reliable stack traces. The only restriction with this is that it currently cannot unwind across the interrupt->normal stack boundary, as that transition is lacking proper annotation. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 19:57:32 +08:00
extern void show_trace(struct task_struct *, struct pt_regs *, unsigned long * rsp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void show_registers(struct pt_regs *regs);
extern void exception_table_check(void);
extern void acpi_reserve_bootmem(void);
extern void swap_low_mappings(void);
extern void __show_regs(struct pt_regs * regs);
extern void show_regs(struct pt_regs * regs);
extern void syscall32_cpu_init(void);
extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end);
[PATCH] Move early chipset quirks out to new file They did not really belong into io_apic.c. Move them into a new file and clean it up a bit. Also remove outdated ATI quirk that was obsolete, Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 16:52:30 +08:00
extern void early_quirks(void);
[PATCH] x86: fix the irqbalance quirk for E7320/E7520/E7525 Move the irqbalance quirks for E7320/E7520/E7525(Errata 23 in http://download.intel.com/design/chipsets/specupdt/30304203.pdf) to early quirks. And add a PCI quirk for these platforms to check(which happens very late during the boot) if the APIC routing is indeed set to default flat mode. This fixes the breakage(in x86_64) of this quirk due to cpu hotplug which selects physical mode instead of the logical flat(as needed for this errata workaround). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07 09:14:10 +08:00
extern void quirk_intel_irqbalance(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void check_efer(void);
extern int unhandled_signal(struct task_struct *tsk, int sig);
extern void select_idle_routine(const struct cpuinfo_x86 *c);
[PATCH] x86_64: Use function pointers to call DMA mapping functions AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 05:44:42 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern unsigned long table_start, table_end;
extern int exception_trace;
extern unsigned cpu_khz;
[PATCH] x86_64: Calgary IOMMU - IOMMU abstractions This patch creates a new interface for IOMMUs by adding a centralized location for IOMMU allocation (for translation tables/apertures) and IOMMU initialization. In creating these, code was moved around for abstraction, uniformity, and consiceness. Take note of the move of the iommu_setup bootarg parsing code to __setup. This is enabled by moving back the location of the aperture allocation/detection to mem init (which while ugly, was already the location of the swiotlb_init). While a slight departure from the previous patch, I belive this provides the true intention of the previous versions of the patch which changed this code. It also makes the addition of the upcoming calgary code much cleaner than previous patches. [AK: Removed one broken change. iommu_setup still has to be called early] Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 19:58:11 +08:00
extern void no_iommu_init(void);
extern int force_iommu, no_iommu;
[PATCH] x86_64: Calgary IOMMU - introduce iommu_detected swiotlb relies on the gart specific iommu_aperture variable to know if we discovered a hardware IOMMU before swiotlb initialization. Introduce iommu_detected to do the same thing, but in a HW IOMMU neutral manner, in preparation for adding the Calgary HW IOMMU. Signed-Off-By: Muli Ben-Yehuda <muli@il.ibm.com> Signed-Off-By: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 19:58:05 +08:00
extern int iommu_detected;
[PATCH] x86_64: Rename IOMMU option, fix help and mark option embedded. - Rename the GART_IOMMU option to IOMMU to make clear it's not just for AMD - Rewrite the help text to better emphatise this fact - Make it an embedded option because too many people get it wrong. To my astonishment I discovered the aacraid driver tests this symbol directly. This looks quite broken to me - it's an internal implementation detail of the PCI DMA API. Can the maintainer please clarify what this test was intended to do? Cc: linux-scsi@vger.kernel.org Cc: alan@redhat.com Cc: markh@osdl.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 19:57:22 +08:00
#ifdef CONFIG_IOMMU
[PATCH] x86_64: Calgary IOMMU - IOMMU abstractions This patch creates a new interface for IOMMUs by adding a centralized location for IOMMU allocation (for translation tables/apertures) and IOMMU initialization. In creating these, code was moved around for abstraction, uniformity, and consiceness. Take note of the move of the iommu_setup bootarg parsing code to __setup. This is enabled by moving back the location of the aperture allocation/detection to mem init (which while ugly, was already the location of the swiotlb_init). While a slight departure from the previous patch, I belive this provides the true intention of the previous versions of the patch which changed this code. It also makes the addition of the upcoming calgary code much cleaner than previous patches. [AK: Removed one broken change. iommu_setup still has to be called early] Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 19:58:11 +08:00
extern void gart_iommu_init(void);
[PATCH] x86-64: fix section mismatch warnings Fix the following section mismatch warnings on x86_64: (build using defconfig) WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:mtrr_bp_init from .text between 'identify_cpu' (at offset 0x65eb) and 'IRQ0x20_interrupt' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data: from .text between 'finish_e820_parsing' (at offset 0x7dc2) and 'early_panic' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:e820_print_map from .text between 'finish_e820_parsing' (at offset 0x7de1) and 'early_panic' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:num_processors from .text between 'acpi_unmap_lsapic' (at offset 0xc88f) and 'acpi_register_ioapic' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:disabled_cpus from .text between 'MP_processor_info' (at offset 0x11f35) and 'mp_register_lapic' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:num_processors from .text between 'MP_processor_info' (at offset 0x11f6e) and 'mp_register_lapic' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:num_processors from .text between 'MP_processor_info' (at offset 0x11f93) and 'mp_register_lapic' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:fix_aperture from .text between 'gart_parse_options' (at offset 0x15517) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:fix_aperture from .text between 'gart_parse_options' (at offset 0x1552c) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:iommu_aperture_allowed from .text between 'gart_parse_options' (at offset 0x1553d) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:iommu_aperture_allowed from .text between 'gart_parse_options' (at offset 0x15552) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:iommu_aperture_allowed from .text between 'gart_parse_options' (at offset 0x15561) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:iommu_aperture_allowed from .text between 'gart_parse_options' (at offset 0x15577) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:fallback_aper_force from .text between 'gart_parse_options' (at offset 0x1558a) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:fallback_aper_order from .text between 'gart_parse_options' (at offset 0x155bf) and 'iommu_full' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:timer_over_8254 from .text between 'ati_bugs' (at offset 0x16344) and 'via_bugs' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:timer_over_8254 from .text between 'ati_bugs' (at offset 0x16356) and 'via_bugs' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:iommu_aperture_allowed from .text between 'via_bugs' (at offset 0x16380) and 'nvidia_bugs' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:iommu_aperture_disabled from .text between 'via_bugs' (at offset 0x16397) and 'nvidia_bugs' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:acpi_use_timer_override from .text between 'nvidia_bugs' (at offset 0x163a7) and 'arch_unregister_cpu' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:nvidia_hpet_check from .text between 'nvidia_bugs' (at offset 0x163b1) and 'arch_unregister_cpu' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data: from .text between 'nvidia_bugs' (at offset 0x163be) and 'arch_unregister_cpu' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data: from .text between 'nvidia_bugs' (at offset 0x163d1) and 'arch_unregister_cpu' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:acpi_skip_timer_override from .text between 'nvidia_bugs' (at offset 0x163e1) and 'arch_unregister_cpu' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:quirk_intel_irqbalance from .text between 'intel_bugs' (at offset 0x1633c) and 'ati_bugs' But adds: WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:get_mtrr_state from .text between 'mtrr_bp_init' (at offset 0xb887) and 'ipi_handler' The warnings does not show up during a normal build due to kbuild failing to check for section mismatch in vmlinux. To see these warnings run: scripts/mod/modpost arch/x86_64/kernel/built-in.o kbuild will be fixed but the 'noise-level' had to be decresed first. There remains a few section mismatch warnigns for x86_64 for areas where I did not feel confident. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andi Kleen <ak@suse.de>
2007-03-17 04:07:36 +08:00
extern void __init gart_parse_options(char *);
[PATCH] x86_64: Calgary IOMMU - IOMMU abstractions This patch creates a new interface for IOMMUs by adding a centralized location for IOMMU allocation (for translation tables/apertures) and IOMMU initialization. In creating these, code was moved around for abstraction, uniformity, and consiceness. Take note of the move of the iommu_setup bootarg parsing code to __setup. This is enabled by moving back the location of the aperture allocation/detection to mem init (which while ugly, was already the location of the swiotlb_init). While a slight departure from the previous patch, I belive this provides the true intention of the previous versions of the patch which changed this code. It also makes the addition of the upcoming calgary code much cleaner than previous patches. [AK: Removed one broken change. iommu_setup still has to be called early] Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 19:58:11 +08:00
extern void iommu_hole_init(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int fallback_aper_order;
extern int fallback_aper_force;
extern int iommu_aperture;
extern int iommu_aperture_allowed;
[PATCH] x86_64: Use function pointers to call DMA mapping functions AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 05:44:42 +08:00
extern int iommu_aperture_disabled;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int fix_aperture;
[PATCH] x86_64: Use function pointers to call DMA mapping functions AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 05:44:42 +08:00
#else
#define iommu_aperture 0
#define iommu_aperture_allowed 0
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int reboot_force;
[PATCH] x86_64: Disable tsc when apicpmtimer is active Otherwise it has no effect anyways. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17 06:42:07 +08:00
extern int notsc_setup(char *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] x86-64: Revert timer routing behaviour back to 2.6.16 state By default route the 8254 over the 8259 and only disable it on ATI boards where this causes double timer interrupts. This should unbreak some Nvidia boards where the timer doesn't seem to tick of it isn't enabled in the 8259. At least one VIA board also seemed to have a little trouble with the disabled 8259. For 2.6.20 we'll try both dynamically without black listing, but I think for .19 this is the safer approach because it has been already well tested in earlier kernels. This also makes the x86-64 behaviour the same as i386. Command line options can change all this of course. Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-22 00:37:03 +08:00
extern int timer_over_8254;
[PATCH] x86: Remove unneeded externs in acpi/boot.c And move one into proto.h Cc: len.brown@intel.com Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 16:52:33 +08:00
extern int gsi_irq_sharing(int gsi);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
extern void smp_local_timer_interrupt(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
#define round_up(x,y) (((x) + (y) - 1) & ~((y)-1))
#define round_down(x,y) ((x) & ~((y)-1))
#endif