OpenCloudOS-Kernel/arch/arm/lib/csumpartialcopygeneric.S

332 lines
6.7 KiB
ArmAsm
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm/lib/csumpartialcopygeneric.S
*
* Copyright (C) 1995-2001 Russell King
*/
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 23:29:12 +08:00
#include <asm/assembler.h>
/*
* unsigned int
* csum_partial_copy_xxx(const char *src, char *dst, int len, int sum, )
* r0 = src, r1 = dst, r2 = len, r3 = sum
* Returns : r0 = checksum
*
* Note that 'tst' and 'teq' preserve the carry flag.
*/
src .req r0
dst .req r1
len .req r2
sum .req r3
.Lzero: mov r0, sum
load_regs
/*
* Align an unaligned destination pointer. We know that
* we have >= 8 bytes here, so we don't need to check
* the length. Note that the source pointer hasn't been
* aligned yet.
*/
.Ldst_unaligned:
tst dst, #1
beq .Ldst_16bit
load1b ip
sub len, len, #1
adcs sum, sum, ip, put_byte_1 @ update checksum
strb ip, [dst], #1
tst dst, #2
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 23:29:12 +08:00
reteq lr @ dst is now 32bit aligned
.Ldst_16bit: load2b r8, ip
sub len, len, #2
adcs sum, sum, r8, put_byte_0
strb r8, [dst], #1
adcs sum, sum, ip, put_byte_1
strb ip, [dst], #1
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 23:29:12 +08:00
ret lr @ dst is now 32bit aligned
/*
* Handle 0 to 7 bytes, with any alignment of source and
* destination pointers. Note that when we get here, C = 0
*/
.Lless8: teq len, #0 @ check for zero count
beq .Lzero
/* we must have at least one byte. */
tst dst, #1 @ dst 16-bit aligned
beq .Lless8_aligned
/* Align dst */
load1b ip
sub len, len, #1
adcs sum, sum, ip, put_byte_1 @ update checksum
strb ip, [dst], #1
tst len, #6
beq .Lless8_byteonly
1: load2b r8, ip
sub len, len, #2
adcs sum, sum, r8, put_byte_0
strb r8, [dst], #1
adcs sum, sum, ip, put_byte_1
strb ip, [dst], #1
.Lless8_aligned:
tst len, #6
bne 1b
.Lless8_byteonly:
tst len, #1
beq .Ldone
load1b r8
adcs sum, sum, r8, put_byte_0 @ update checksum
strb r8, [dst], #1
b .Ldone
FN_ENTRY
save_regs
mov sum, #-1
cmp len, #8 @ Ensure that we have at least
blo .Lless8 @ 8 bytes to copy.
adds sum, sum, #0 @ C = 0
tst dst, #3 @ Test destination alignment
blne .Ldst_unaligned @ align destination, return here
/*
* Ok, the dst pointer is now 32bit aligned, and we know
* that we must have more than 4 bytes to copy. Note
* that C contains the carry from the dst alignment above.
*/
tst src, #3 @ Test source alignment
bne .Lsrc_not_aligned
/* Routine for src & dst aligned */
bics ip, len, #15
beq 2f
1: load4l r4, r5, r6, r7
stmia dst!, {r4, r5, r6, r7}
adcs sum, sum, r4
adcs sum, sum, r5
adcs sum, sum, r6
adcs sum, sum, r7
sub ip, ip, #16
teq ip, #0
bne 1b
2: ands ip, len, #12
beq 4f
tst ip, #8
beq 3f
load2l r4, r5
stmia dst!, {r4, r5}
adcs sum, sum, r4
adcs sum, sum, r5
tst ip, #4
beq 4f
3: load1l r4
str r4, [dst], #4
adcs sum, sum, r4
4: ands len, len, #3
beq .Ldone
load1l r4
tst len, #2
mov r5, r4, get_byte_0
beq .Lexit
adcs sum, sum, r4, lspush #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
.Lexit: tst len, #1
strbne r5, [dst], #1
andne r5, r5, #255
adcsne sum, sum, r5, put_byte_0
/*
* If the dst pointer was not 16-bit aligned, we
* need to rotate the checksum here to get around
* the inefficient byte manipulations in the
* architecture independent code.
*/
.Ldone: adc r0, sum, #0
ldr sum, [sp, #0] @ dst
tst sum, #1
movne r0, r0, ror #8
load_regs
.Lsrc_not_aligned:
adc sum, sum, #0 @ include C from dst alignment
and ip, src, #3
bic src, src, #3
load1l r5
cmp ip, #2
beq .Lsrc2_aligned
bhi .Lsrc3_aligned
mov r4, r5, lspull #8 @ C = 0
bics ip, len, #15
beq 2f
1: load4l r5, r6, r7, r8
orr r4, r4, r5, lspush #24
mov r5, r5, lspull #8
orr r5, r5, r6, lspush #24
mov r6, r6, lspull #8
orr r6, r6, r7, lspush #24
mov r7, r7, lspull #8
orr r7, r7, r8, lspush #24
stmia dst!, {r4, r5, r6, r7}
adcs sum, sum, r4
adcs sum, sum, r5
adcs sum, sum, r6
adcs sum, sum, r7
mov r4, r8, lspull #8
sub ip, ip, #16
teq ip, #0
bne 1b
2: ands ip, len, #12
beq 4f
tst ip, #8
beq 3f
load2l r5, r6
orr r4, r4, r5, lspush #24
mov r5, r5, lspull #8
orr r5, r5, r6, lspush #24
stmia dst!, {r4, r5}
adcs sum, sum, r4
adcs sum, sum, r5
mov r4, r6, lspull #8
tst ip, #4
beq 4f
3: load1l r5
orr r4, r4, r5, lspush #24
str r4, [dst], #4
adcs sum, sum, r4
mov r4, r5, lspull #8
4: ands len, len, #3
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .Lexit
adcs sum, sum, r4, lspush #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
b .Lexit
.Lsrc2_aligned: mov r4, r5, lspull #16
adds sum, sum, #0
bics ip, len, #15
beq 2f
1: load4l r5, r6, r7, r8
orr r4, r4, r5, lspush #16
mov r5, r5, lspull #16
orr r5, r5, r6, lspush #16
mov r6, r6, lspull #16
orr r6, r6, r7, lspush #16
mov r7, r7, lspull #16
orr r7, r7, r8, lspush #16
stmia dst!, {r4, r5, r6, r7}
adcs sum, sum, r4
adcs sum, sum, r5
adcs sum, sum, r6
adcs sum, sum, r7
mov r4, r8, lspull #16
sub ip, ip, #16
teq ip, #0
bne 1b
2: ands ip, len, #12
beq 4f
tst ip, #8
beq 3f
load2l r5, r6
orr r4, r4, r5, lspush #16
mov r5, r5, lspull #16
orr r5, r5, r6, lspush #16
stmia dst!, {r4, r5}
adcs sum, sum, r4
adcs sum, sum, r5
mov r4, r6, lspull #16
tst ip, #4
beq 4f
3: load1l r5
orr r4, r4, r5, lspush #16
str r4, [dst], #4
adcs sum, sum, r4
mov r4, r5, lspull #16
4: ands len, len, #3
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .Lexit
adcs sum, sum, r4
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
tst len, #1
beq .Ldone
load1b r5
b .Lexit
.Lsrc3_aligned: mov r4, r5, lspull #24
adds sum, sum, #0
bics ip, len, #15
beq 2f
1: load4l r5, r6, r7, r8
orr r4, r4, r5, lspush #8
mov r5, r5, lspull #24
orr r5, r5, r6, lspush #8
mov r6, r6, lspull #24
orr r6, r6, r7, lspush #8
mov r7, r7, lspull #24
orr r7, r7, r8, lspush #8
stmia dst!, {r4, r5, r6, r7}
adcs sum, sum, r4
adcs sum, sum, r5
adcs sum, sum, r6
adcs sum, sum, r7
mov r4, r8, lspull #24
sub ip, ip, #16
teq ip, #0
bne 1b
2: ands ip, len, #12
beq 4f
tst ip, #8
beq 3f
load2l r5, r6
orr r4, r4, r5, lspush #8
mov r5, r5, lspull #24
orr r5, r5, r6, lspush #8
stmia dst!, {r4, r5}
adcs sum, sum, r4
adcs sum, sum, r5
mov r4, r6, lspull #24
tst ip, #4
beq 4f
3: load1l r5
orr r4, r4, r5, lspush #8
str r4, [dst], #4
adcs sum, sum, r4
mov r4, r5, lspull #24
4: ands len, len, #3
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .Lexit
strb r5, [dst], #1
adcs sum, sum, r4
load1l r4
mov r5, r4, get_byte_0
strb r5, [dst], #1
adcs sum, sum, r4, lspush #24
mov r5, r4, get_byte_1
b .Lexit
FN_EXIT