UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/wireless/b43/phy_n.c

1273 lines
36 KiB
C
Raw Normal View History

b43: Add N-PHY register definitions This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-09 23:13:56 +08:00
/*
Broadcom B43 wireless driver
IEEE 802.11n PHY support
Copyright (c) 2008 Michael Buesch <mb@bu3sch.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
Boston, MA 02110-1301, USA.
*/
b43/nphy.c: include headers to avoid build breakage on some platforms Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 05:57:10 +08:00
#include <linux/delay.h>
#include <linux/types.h>
b43: Add N-PHY register definitions This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-09 23:13:56 +08:00
#include "b43.h"
b43: Move code from nphy.* to phy_n.* Sourcecode files for PHY code are named by phy_XXX.{c,h} where XXX is the PHY type. Move the N-PHY code to match the other files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-30 08:27:19 +08:00
#include "phy_n.h"
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
#include "tables_nphy.h"
b43: N-PHY: add clip detection reading/writing and some classifier function Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 21:31:39 +08:00
#include "main.h"
b43: Add N-PHY register definitions This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-09 23:13:56 +08:00
b43: N-PHY: add needed struct definitions Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 19:34:21 +08:00
struct nphy_txgains {
u16 txgm[2];
u16 pga[2];
u16 pad[2];
u16 ipa[2];
};
struct nphy_iqcal_params {
u16 txgm;
u16 pga;
u16 pad;
u16 ipa;
u16 cal_gain;
u16 ncorr[5];
};
struct nphy_iq_est {
s32 iq0_prod;
u32 i0_pwr;
u32 q0_pwr;
s32 iq1_prod;
u32 i1_pwr;
u32 q1_pwr;
};
b43: Add N-PHY register definitions This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-09 23:13:56 +08:00
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
{//TODO
}
b43: Rewrite TX power adjustment This patch rewrites the TX power recalculation algorithms to scale better with changed enviromnent. If there's low TX traffic, the power will be checked against the desired values every 60 seconds. If there is high TX traffic, the check is redone every 2 seconds. This improves the reaction times a lot and confuses the rate control less. It will also reduce the time it initially takes to tune to a new TX power value. With the old algorithm it could take about 30 to 45 seconds to settle to a new power value. This will happen in about two to four seconds now. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29 01:33:40 +08:00
static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev)
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
{//TODO
}
b43: Rewrite TX power adjustment This patch rewrites the TX power recalculation algorithms to scale better with changed enviromnent. If there's low TX traffic, the power will be checked against the desired values every 60 seconds. If there is high TX traffic, the check is redone every 2 seconds. This improves the reaction times a lot and confuses the rate control less. It will also reduce the time it initially takes to tune to a new TX power value. With the old algorithm it could take about 30 to 45 seconds to settle to a new power value. This will happen in about two to four seconds now. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29 01:33:40 +08:00
static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev,
bool ignore_tssi)
{//TODO
return B43_TXPWR_RES_DONE;
}
b43: Add NPHY channel switch code This adds code and table data for channel switching on NPHYs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 07:05:57 +08:00
static void b43_chantab_radio_upload(struct b43_wldev *dev,
const struct b43_nphy_channeltab_entry *e)
{
b43_radio_write16(dev, B2055_PLL_REF, e->radio_pll_ref);
b43_radio_write16(dev, B2055_RF_PLLMOD0, e->radio_rf_pllmod0);
b43_radio_write16(dev, B2055_RF_PLLMOD1, e->radio_rf_pllmod1);
b43_radio_write16(dev, B2055_VCO_CAPTAIL, e->radio_vco_captail);
b43_radio_write16(dev, B2055_VCO_CAL1, e->radio_vco_cal1);
b43_radio_write16(dev, B2055_VCO_CAL2, e->radio_vco_cal2);
b43_radio_write16(dev, B2055_PLL_LFC1, e->radio_pll_lfc1);
b43_radio_write16(dev, B2055_PLL_LFR1, e->radio_pll_lfr1);
b43_radio_write16(dev, B2055_PLL_LFC2, e->radio_pll_lfc2);
b43_radio_write16(dev, B2055_LGBUF_CENBUF, e->radio_lgbuf_cenbuf);
b43_radio_write16(dev, B2055_LGEN_TUNE1, e->radio_lgen_tune1);
b43_radio_write16(dev, B2055_LGEN_TUNE2, e->radio_lgen_tune2);
b43_radio_write16(dev, B2055_C1_LGBUF_ATUNE, e->radio_c1_lgbuf_atune);
b43_radio_write16(dev, B2055_C1_LGBUF_GTUNE, e->radio_c1_lgbuf_gtune);
b43_radio_write16(dev, B2055_C1_RX_RFR1, e->radio_c1_rx_rfr1);
b43_radio_write16(dev, B2055_C1_TX_PGAPADTN, e->radio_c1_tx_pgapadtn);
b43_radio_write16(dev, B2055_C1_TX_MXBGTRIM, e->radio_c1_tx_mxbgtrim);
b43_radio_write16(dev, B2055_C2_LGBUF_ATUNE, e->radio_c2_lgbuf_atune);
b43_radio_write16(dev, B2055_C2_LGBUF_GTUNE, e->radio_c2_lgbuf_gtune);
b43_radio_write16(dev, B2055_C2_RX_RFR1, e->radio_c2_rx_rfr1);
b43_radio_write16(dev, B2055_C2_TX_PGAPADTN, e->radio_c2_tx_pgapadtn);
b43_radio_write16(dev, B2055_C2_TX_MXBGTRIM, e->radio_c2_tx_mxbgtrim);
}
static void b43_chantab_phy_upload(struct b43_wldev *dev,
const struct b43_nphy_channeltab_entry *e)
{
b43_phy_write(dev, B43_NPHY_BW1A, e->phy_bw1a);
b43_phy_write(dev, B43_NPHY_BW2, e->phy_bw2);
b43_phy_write(dev, B43_NPHY_BW3, e->phy_bw3);
b43_phy_write(dev, B43_NPHY_BW4, e->phy_bw4);
b43_phy_write(dev, B43_NPHY_BW5, e->phy_bw5);
b43_phy_write(dev, B43_NPHY_BW6, e->phy_bw6);
}
static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
{
//TODO
}
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
/* Tune the hardware to a new channel. */
static int nphy_channel_switch(struct b43_wldev *dev, unsigned int channel)
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
{
b43: Add NPHY channel switch code This adds code and table data for channel switching on NPHYs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 07:05:57 +08:00
const struct b43_nphy_channeltab_entry *tabent;
tabent = b43_nphy_get_chantabent(dev, channel);
if (!tabent)
return -ESRCH;
//FIXME enable/disable band select upper20 in RXCTL
if (0 /*FIXME 5Ghz*/)
b43_radio_maskset(dev, B2055_MASTER1, 0xFF8F, 0x20);
else
b43_radio_maskset(dev, B2055_MASTER1, 0xFF8F, 0x50);
b43_chantab_radio_upload(dev, tabent);
udelay(50);
b43_radio_write16(dev, B2055_VCO_CAL10, 5);
b43_radio_write16(dev, B2055_VCO_CAL10, 45);
b43_radio_write16(dev, B2055_VCO_CAL10, 65);
udelay(300);
if (0 /*FIXME 5Ghz*/)
b43_phy_set(dev, B43_NPHY_BANDCTL, B43_NPHY_BANDCTL_5GHZ);
else
b43_phy_mask(dev, B43_NPHY_BANDCTL, ~B43_NPHY_BANDCTL_5GHZ);
b43_chantab_phy_upload(dev, tabent);
b43_nphy_tx_power_fix(dev);
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
b43: Add NPHY channel switch code This adds code and table data for channel switching on NPHYs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 07:05:57 +08:00
return 0;
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
}
static void b43_radio_init2055_pre(struct b43_wldev *dev)
{
b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
~B43_NPHY_RFCTL_CMD_PORFORCE);
b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
B43_NPHY_RFCTL_CMD_CHIP0PU |
B43_NPHY_RFCTL_CMD_OEPORFORCE);
b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
B43_NPHY_RFCTL_CMD_PORFORCE);
}
static void b43_radio_init2055_post(struct b43_wldev *dev)
{
struct ssb_sprom *sprom = &(dev->dev->bus->sprom);
struct ssb_boardinfo *binfo = &(dev->dev->bus->boardinfo);
int i;
u16 val;
b43_radio_mask(dev, B2055_MASTER1, 0xFFF3);
msleep(1);
b43: implement baseband init for LP-PHY <= rev1 Implement baseband init for rev.0 and rev.1 LP PHYs. Convert boardflags_hi values to defines. Implement b43_phy_copy for easier copying between registers, as needed by LP-PHY init. Signed-off-by: Gábor Stefanik<netrolller.3d@gmail.com> Cc: Michael Buesch<mb@bu3sch.de> Cc: Larry Finger<larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03 07:28:12 +08:00
if ((sprom->revision != 4) ||
!(sprom->boardflags_hi & B43_BFH_RSSIINV)) {
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
if ((binfo->vendor != PCI_VENDOR_ID_BROADCOM) ||
(binfo->type != 0x46D) ||
(binfo->rev < 0x41)) {
b43_radio_mask(dev, B2055_C1_RX_BB_REG, 0x7F);
b43_radio_mask(dev, B2055_C1_RX_BB_REG, 0x7F);
msleep(1);
}
}
b43_radio_maskset(dev, B2055_RRCCAL_NOPTSEL, 0x3F, 0x2C);
msleep(1);
b43_radio_write16(dev, B2055_CAL_MISC, 0x3C);
msleep(1);
b43_radio_mask(dev, B2055_CAL_MISC, 0xFFBE);
msleep(1);
b43_radio_set(dev, B2055_CAL_LPOCTL, 0x80);
msleep(1);
b43_radio_set(dev, B2055_CAL_MISC, 0x1);
msleep(1);
b43_radio_set(dev, B2055_CAL_MISC, 0x40);
msleep(1);
for (i = 0; i < 100; i++) {
val = b43_radio_read16(dev, B2055_CAL_COUT2);
if (val & 0x80)
break;
udelay(10);
}
msleep(1);
b43_radio_mask(dev, B2055_CAL_LPOCTL, 0xFF7F);
msleep(1);
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
nphy_channel_switch(dev, dev->phy.channel);
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
b43_radio_write16(dev, B2055_C1_RX_BB_LPF, 0x9);
b43_radio_write16(dev, B2055_C2_RX_BB_LPF, 0x9);
b43_radio_write16(dev, B2055_C1_RX_BB_MIDACHP, 0x83);
b43_radio_write16(dev, B2055_C2_RX_BB_MIDACHP, 0x83);
}
/* Initialize a Broadcom 2055 N-radio */
static void b43_radio_init2055(struct b43_wldev *dev)
{
b43_radio_init2055_pre(dev);
if (b43_status(dev) < B43_STAT_INITIALIZED)
b2055_upload_inittab(dev, 0, 1);
else
b2055_upload_inittab(dev, 0/*FIXME on 5ghz band*/, 0);
b43_radio_init2055_post(dev);
}
void b43_nphy_radio_turn_on(struct b43_wldev *dev)
{
b43_radio_init2055(dev);
}
void b43_nphy_radio_turn_off(struct b43_wldev *dev)
{
b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
~B43_NPHY_RFCTL_CMD_EN);
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
#define ntab_upload(dev, offset, data) do { \
unsigned int i; \
for (i = 0; i < (offset##_SIZE); i++) \
b43_ntab_write(dev, (offset) + i, (data)[i]); \
} while (0)
b43: N-PHY: clean table init, check PHY rev Move table init to tables_nphy.c, detect newer PHY which use different init. We don't init newer PHYs yet but this at least shows what more is needed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 19:18:21 +08:00
/*
* Upload the N-PHY tables.
* http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
*/
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
static void b43_nphy_tables_init(struct b43_wldev *dev)
{
b43: N-PHY: clean table init, check PHY rev Move table init to tables_nphy.c, detect newer PHY which use different init. We don't init newer PHYs yet but this at least shows what more is needed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 19:18:21 +08:00
if (dev->phy.rev < 3)
b43_nphy_rev0_1_2_tables_init(dev);
else
b43_nphy_rev3plus_tables_init(dev);
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
}
static void b43_nphy_workarounds(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
unsigned int i;
b43_phy_set(dev, B43_NPHY_IQFLIP,
B43_NPHY_IQFLIP_ADC1 | B43_NPHY_IQFLIP_ADC2);
if (1 /* FIXME band is 2.4GHz */) {
b43_phy_set(dev, B43_NPHY_CLASSCTL,
B43_NPHY_CLASSCTL_CCKEN);
} else {
b43_phy_mask(dev, B43_NPHY_CLASSCTL,
~B43_NPHY_CLASSCTL_CCKEN);
}
b43_radio_set(dev, B2055_C1_TX_RF_SPARE, 0x8);
b43_phy_write(dev, B43_NPHY_TXFRAMEDELAY, 8);
/* Fixup some tables */
b43_ntab_write(dev, B43_NTAB16(8, 0x00), 0xA);
b43_ntab_write(dev, B43_NTAB16(8, 0x10), 0xA);
b43_ntab_write(dev, B43_NTAB16(8, 0x02), 0xCDAA);
b43_ntab_write(dev, B43_NTAB16(8, 0x12), 0xCDAA);
b43_ntab_write(dev, B43_NTAB16(8, 0x08), 0);
b43_ntab_write(dev, B43_NTAB16(8, 0x18), 0);
b43_ntab_write(dev, B43_NTAB16(8, 0x07), 0x7AAB);
b43_ntab_write(dev, B43_NTAB16(8, 0x17), 0x7AAB);
b43_ntab_write(dev, B43_NTAB16(8, 0x06), 0x800);
b43_ntab_write(dev, B43_NTAB16(8, 0x16), 0x800);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
//TODO set RF sequence
/* Set narrowband clip threshold */
b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 66);
b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 66);
/* Set wideband clip 2 threshold */
b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
~B43_NPHY_C1_CLIPWBTHRES_CLIP2,
21 << B43_NPHY_C1_CLIPWBTHRES_CLIP2_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
~B43_NPHY_C2_CLIPWBTHRES_CLIP2,
21 << B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT);
/* Set Clip 2 detect */
b43_phy_set(dev, B43_NPHY_C1_CGAINI,
B43_NPHY_C1_CGAINI_CL2DETECT);
b43_phy_set(dev, B43_NPHY_C2_CGAINI,
B43_NPHY_C2_CGAINI_CL2DETECT);
if (0 /*FIXME*/) {
/* Set dwell lengths */
b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 43);
b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 43);
b43_phy_write(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 9);
b43_phy_write(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 9);
/* Set gain backoff */
b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
~B43_NPHY_C1_CGAINI_GAINBKOFF,
1 << B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
~B43_NPHY_C2_CGAINI_GAINBKOFF,
1 << B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT);
/* Set HPVGA2 index */
b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN,
~B43_NPHY_C1_INITGAIN_HPVGA2,
6 << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN,
~B43_NPHY_C2_INITGAIN_HPVGA2,
6 << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
//FIXME verify that the specs really mean to use autoinc here.
for (i = 0; i < 3; i++)
b43_ntab_write(dev, B43_NTAB16(7, 0x106) + i, 0x673);
}
/* Set minimum gain value */
b43_phy_maskset(dev, B43_NPHY_C1_MINMAX_GAIN,
~B43_NPHY_C1_MINGAIN,
23 << B43_NPHY_C1_MINGAIN_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_MINMAX_GAIN,
~B43_NPHY_C2_MINGAIN,
23 << B43_NPHY_C2_MINGAIN_SHIFT);
if (phy->rev < 2) {
b43_phy_mask(dev, B43_NPHY_SCRAM_SIGCTL,
~B43_NPHY_SCRAM_SIGCTL_SCM);
}
/* Set phase track alpha and beta */
b43_phy_write(dev, B43_NPHY_PHASETR_A0, 0x125);
b43_phy_write(dev, B43_NPHY_PHASETR_A1, 0x1B3);
b43_phy_write(dev, B43_NPHY_PHASETR_A2, 0x105);
b43_phy_write(dev, B43_NPHY_PHASETR_B0, 0x16E);
b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0xCD);
b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20);
}
b43: N-PHY: implement PA overriding (RF control related) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 22:02:38 +08:00
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PA%20override */
static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
{
struct b43_phy_n *nphy = dev->phy.n;
enum ieee80211_band band;
u16 tmp;
if (!enable) {
nphy->rfctrl_intc1_save = b43_phy_read(dev,
B43_NPHY_RFCTL_INTC1);
nphy->rfctrl_intc2_save = b43_phy_read(dev,
B43_NPHY_RFCTL_INTC2);
band = b43_current_band(dev->wl);
if (dev->phy.rev >= 3) {
if (band == IEEE80211_BAND_5GHZ)
tmp = 0x600;
else
tmp = 0x480;
} else {
if (band == IEEE80211_BAND_5GHZ)
tmp = 0x180;
else
tmp = 0x120;
}
b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, tmp);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, tmp);
} else {
b43_phy_write(dev, B43_NPHY_RFCTL_INTC1,
nphy->rfctrl_intc1_save);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC2,
nphy->rfctrl_intc2_save);
}
}
b43: N-PHY: update CCA reset Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:36:43 +08:00
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
static void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
{
u32 tmslow;
if (dev->phy.type != B43_PHYTYPE_N)
return;
tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
if (force)
tmslow |= SSB_TMSLOW_FGC;
else
tmslow &= ~SSB_TMSLOW_FGC;
ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CCA */
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
static void b43_nphy_reset_cca(struct b43_wldev *dev)
{
u16 bbcfg;
b43: N-PHY: update CCA reset Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:36:43 +08:00
b43_nphy_bmac_clock_fgc(dev, 1);
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
bbcfg = b43_phy_read(dev, B43_NPHY_BBCFG);
b43: N-PHY: update CCA reset Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:36:43 +08:00
b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg | B43_NPHY_BBCFG_RSTCCA);
udelay(1);
b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg & ~B43_NPHY_BBCFG_RSTCCA);
b43_nphy_bmac_clock_fgc(dev, 0);
/* TODO: N PHY Force RF Seq with argument 2 */
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
}
b43: N-PHY: add clip detection reading/writing and some classifier function Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 21:31:39 +08:00
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
static void b43_nphy_write_clip_detection(struct b43_wldev *dev, u16 *clip_st)
{
b43_phy_write(dev, B43_NPHY_C1_CLIP1THRES, clip_st[0]);
b43_phy_write(dev, B43_NPHY_C2_CLIP1THRES, clip_st[1]);
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
static void b43_nphy_read_clip_detection(struct b43_wldev *dev, u16 *clip_st)
{
clip_st[0] = b43_phy_read(dev, B43_NPHY_C1_CLIP1THRES);
clip_st[1] = b43_phy_read(dev, B43_NPHY_C2_CLIP1THRES);
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/classifier */
static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val)
{
u16 tmp;
if (dev->dev->id.revision == 16)
b43_mac_suspend(dev);
tmp = b43_phy_read(dev, B43_NPHY_CLASSCTL);
tmp &= (B43_NPHY_CLASSCTL_CCKEN | B43_NPHY_CLASSCTL_OFDMEN |
B43_NPHY_CLASSCTL_WAITEDEN);
tmp &= ~mask;
tmp |= (val & mask);
b43_phy_maskset(dev, B43_NPHY_CLASSCTL, 0xFFF8, tmp);
if (dev->dev->id.revision == 16)
b43_mac_enable(dev);
return tmp;
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
enum b43_nphy_rf_sequence {
B43_RFSEQ_RX2TX,
B43_RFSEQ_TX2RX,
B43_RFSEQ_RESET2RX,
B43_RFSEQ_UPDATE_GAINH,
B43_RFSEQ_UPDATE_GAINL,
B43_RFSEQ_UPDATE_GAINU,
};
static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
enum b43_nphy_rf_sequence seq)
{
static const u16 trigger[] = {
[B43_RFSEQ_RX2TX] = B43_NPHY_RFSEQTR_RX2TX,
[B43_RFSEQ_TX2RX] = B43_NPHY_RFSEQTR_TX2RX,
[B43_RFSEQ_RESET2RX] = B43_NPHY_RFSEQTR_RST2RX,
[B43_RFSEQ_UPDATE_GAINH] = B43_NPHY_RFSEQTR_UPGH,
[B43_RFSEQ_UPDATE_GAINL] = B43_NPHY_RFSEQTR_UPGL,
[B43_RFSEQ_UPDATE_GAINU] = B43_NPHY_RFSEQTR_UPGU,
};
int i;
B43_WARN_ON(seq >= ARRAY_SIZE(trigger));
b43_phy_set(dev, B43_NPHY_RFSEQMODE,
B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER);
b43_phy_set(dev, B43_NPHY_RFSEQTR, trigger[seq]);
for (i = 0; i < 200; i++) {
if (!(b43_phy_read(dev, B43_NPHY_RFSEQST) & trigger[seq]))
goto ok;
msleep(1);
}
b43err(dev->wl, "RF sequence status timeout\n");
ok:
b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
~(B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER));
}
static void b43_nphy_bphy_init(struct b43_wldev *dev)
{
unsigned int i;
u16 val;
val = 0x1E1F;
for (i = 0; i < 14; i++) {
b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val);
val -= 0x202;
}
val = 0x3E3F;
for (i = 0; i < 16; i++) {
b43_phy_write(dev, B43_PHY_N_BMODE(0x97 + i), val);
val -= 0x202;
}
b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
}
b43: N-PHY: implement RSSI selection and offset scaling Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 21:38:32 +08:00
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ScaleOffsetRssi */
static void b43_nphy_scale_offset_rssi(struct b43_wldev *dev, u16 scale,
s8 offset, u8 core, u8 rail, u8 type)
{
u16 tmp;
bool core1or5 = (core == 1) || (core == 5);
bool core2or5 = (core == 2) || (core == 5);
offset = clamp_val(offset, -32, 31);
tmp = ((scale & 0x3F) << 8) | (offset & 0x3F);
if (core1or5 && (rail == 0) && (type == 2))
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Z, tmp);
if (core1or5 && (rail == 1) && (type == 2))
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z, tmp);
if (core2or5 && (rail == 0) && (type == 2))
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Z, tmp);
if (core2or5 && (rail == 1) && (type == 2))
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Z, tmp);
if (core1or5 && (rail == 0) && (type == 0))
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_X, tmp);
if (core1or5 && (rail == 1) && (type == 0))
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_X, tmp);
if (core2or5 && (rail == 0) && (type == 0))
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_X, tmp);
if (core2or5 && (rail == 1) && (type == 0))
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_X, tmp);
if (core1or5 && (rail == 0) && (type == 1))
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Y, tmp);
if (core1or5 && (rail == 1) && (type == 1))
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Y, tmp);
if (core2or5 && (rail == 0) && (type == 1))
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Y, tmp);
if (core2or5 && (rail == 1) && (type == 1))
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Y, tmp);
if (core1or5 && (rail == 0) && (type == 6))
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_TBD, tmp);
if (core1or5 && (rail == 1) && (type == 6))
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_TBD, tmp);
if (core2or5 && (rail == 0) && (type == 6))
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_TBD, tmp);
if (core2or5 && (rail == 1) && (type == 6))
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_TBD, tmp);
if (core1or5 && (rail == 0) && (type == 3))
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_PWRDET, tmp);
if (core1or5 && (rail == 1) && (type == 3))
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_PWRDET, tmp);
if (core2or5 && (rail == 0) && (type == 3))
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_PWRDET, tmp);
if (core2or5 && (rail == 1) && (type == 3))
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_PWRDET, tmp);
if (core1or5 && (type == 4))
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_TSSI, tmp);
if (core2or5 && (type == 4))
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_TSSI, tmp);
if (core1or5 && (type == 5))
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_TSSI, tmp);
if (core2or5 && (type == 5))
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_TSSI, tmp);
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSISel */
static void b43_nphy_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
{
u16 val;
if (dev->phy.rev >= 3) {
/* TODO */
} else {
if (type < 3)
val = 0;
else if (type == 6)
val = 1;
else if (type == 3)
val = 2;
else
val = 3;
val = (val << 12) | (val << 14);
b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, val);
b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, val);
if (type < 3) {
b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO1, 0xFFCF,
(type + 1) << 4);
b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO2, 0xFFCF,
(type + 1) << 4);
}
/* TODO use some definitions */
if (code == 0) {
b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF, 0);
if (type < 3) {
b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
0xFEC7, 0);
b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
0xEFDC, 0);
b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
0xFFFE, 0);
udelay(20);
b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
0xFFFE, 0);
}
} else {
b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF,
0x3000);
if (type < 3) {
b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
0xFEC7, 0x0180);
b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
0xEFDC, (code << 1 | 0x1021));
b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
0xFFFE, 0x0001);
udelay(20);
b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
0xFFFE, 0);
}
}
}
}
b43: N-PHY: add RSSI polling and setting 2055 (radio) VCM Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 21:45:13 +08:00
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SetRssi2055Vcm */
static void b43_nphy_set_rssi_2055_vcm(struct b43_wldev *dev, u8 type, u8 *buf)
{
int i;
for (i = 0; i < 2; i++) {
if (type == 2) {
if (i == 0) {
b43_radio_maskset(dev, B2055_C1_B0NB_RSSIVCM,
0xFC, buf[0]);
b43_radio_maskset(dev, B2055_C1_RX_BB_RSSICTL5,
0xFC, buf[1]);
} else {
b43_radio_maskset(dev, B2055_C2_B0NB_RSSIVCM,
0xFC, buf[2 * i]);
b43_radio_maskset(dev, B2055_C2_RX_BB_RSSICTL5,
0xFC, buf[2 * i + 1]);
}
} else {
if (i == 0)
b43_radio_maskset(dev, B2055_C1_RX_BB_RSSICTL5,
0xF3, buf[0] << 2);
else
b43_radio_maskset(dev, B2055_C2_RX_BB_RSSICTL5,
0xF3, buf[2 * i + 1] << 2);
}
}
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PollRssi */
static int b43_nphy_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
u8 nsamp)
{
int i;
int out;
u16 save_regs_phy[9];
u16 s[2];
if (dev->phy.rev >= 3) {
save_regs_phy[0] = b43_phy_read(dev,
B43_NPHY_RFCTL_LUT_TRSW_UP1);
save_regs_phy[1] = b43_phy_read(dev,
B43_NPHY_RFCTL_LUT_TRSW_UP2);
save_regs_phy[2] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
save_regs_phy[3] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
save_regs_phy[4] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER1);
save_regs_phy[5] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
save_regs_phy[6] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B1S0);
save_regs_phy[7] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B32S1);
}
b43_nphy_rssi_select(dev, 5, type);
if (dev->phy.rev < 2) {
save_regs_phy[8] = b43_phy_read(dev, B43_NPHY_GPIO_SEL);
b43_phy_write(dev, B43_NPHY_GPIO_SEL, 5);
}
for (i = 0; i < 4; i++)
buf[i] = 0;
for (i = 0; i < nsamp; i++) {
if (dev->phy.rev < 2) {
s[0] = b43_phy_read(dev, B43_NPHY_GPIO_LOOUT);
s[1] = b43_phy_read(dev, B43_NPHY_GPIO_HIOUT);
} else {
s[0] = b43_phy_read(dev, B43_NPHY_RSSI1);
s[1] = b43_phy_read(dev, B43_NPHY_RSSI2);
}
buf[0] += ((s8)((s[0] & 0x3F) << 2)) >> 2;
buf[1] += ((s8)(((s[0] >> 8) & 0x3F) << 2)) >> 2;
buf[2] += ((s8)((s[1] & 0x3F) << 2)) >> 2;
buf[3] += ((s8)(((s[1] >> 8) & 0x3F) << 2)) >> 2;
}
out = (buf[0] & 0xFF) << 24 | (buf[1] & 0xFF) << 16 |
(buf[2] & 0xFF) << 8 | (buf[3] & 0xFF);
if (dev->phy.rev < 2)
b43_phy_write(dev, B43_NPHY_GPIO_SEL, save_regs_phy[8]);
if (dev->phy.rev >= 3) {
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1,
save_regs_phy[0]);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2,
save_regs_phy[1]);
b43_phy_write(dev, B43_NPHY_AFECTL_C1, save_regs_phy[2]);
b43_phy_write(dev, B43_NPHY_AFECTL_C2, save_regs_phy[3]);
b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, save_regs_phy[4]);
b43_phy_write(dev, B43_NPHY_AFECTL_OVER, save_regs_phy[5]);
b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S0, save_regs_phy[6]);
b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S1, save_regs_phy[7]);
}
return out;
}
b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:40:58 +08:00
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal */
static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
{
b43: N-PHY: RSSI calibration for rev < 3 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 21:48:21 +08:00
int i, j;
u8 state[4];
u8 code, val;
u16 class, override;
u8 regs_save_radio[2];
u16 regs_save_phy[2];
s8 offset[4];
u16 clip_state[2];
u16 clip_off[2] = { 0xFFFF, 0xFFFF };
s32 results_min[4] = { };
u8 vcm_final[4] = { };
s32 results[4][4] = { };
s32 miniq[4][2] = { };
if (type == 2) {
code = 0;
val = 6;
} else if (type < 2) {
code = 25;
val = 4;
} else {
B43_WARN_ON(1);
return;
}
class = b43_nphy_classifier(dev, 0, 0);
b43_nphy_classifier(dev, 7, 4);
b43_nphy_read_clip_detection(dev, clip_state);
b43_nphy_write_clip_detection(dev, clip_off);
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
override = 0x140;
else
override = 0x110;
regs_save_phy[0] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
regs_save_radio[0] = b43_radio_read16(dev, B2055_C1_PD_RXTX);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, override);
b43_radio_write16(dev, B2055_C1_PD_RXTX, val);
regs_save_phy[1] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
regs_save_radio[1] = b43_radio_read16(dev, B2055_C2_PD_RXTX);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, override);
b43_radio_write16(dev, B2055_C2_PD_RXTX, val);
state[0] = b43_radio_read16(dev, B2055_C1_PD_RSSIMISC) & 0x07;
state[1] = b43_radio_read16(dev, B2055_C2_PD_RSSIMISC) & 0x07;
b43_radio_mask(dev, B2055_C1_PD_RSSIMISC, 0xF8);
b43_radio_mask(dev, B2055_C2_PD_RSSIMISC, 0xF8);
state[2] = b43_radio_read16(dev, B2055_C1_SP_RSSI) & 0x07;
state[3] = b43_radio_read16(dev, B2055_C2_SP_RSSI) & 0x07;
b43_nphy_rssi_select(dev, 5, type);
b43_nphy_scale_offset_rssi(dev, 0, 0, 5, 0, type);
b43_nphy_scale_offset_rssi(dev, 0, 0, 5, 1, type);
for (i = 0; i < 4; i++) {
u8 tmp[4];
for (j = 0; j < 4; j++)
tmp[j] = i;
if (type != 1)
b43_nphy_set_rssi_2055_vcm(dev, type, tmp);
b43_nphy_poll_rssi(dev, type, results[i], 8);
if (type < 2)
for (j = 0; j < 2; j++)
miniq[i][j] = min(results[i][2 * j],
results[i][2 * j + 1]);
}
for (i = 0; i < 4; i++) {
s32 mind = 40;
u8 minvcm = 0;
s32 minpoll = 249;
s32 curr;
for (j = 0; j < 4; j++) {
if (type == 2)
curr = abs(results[j][i]);
else
curr = abs(miniq[j][i / 2] - code * 8);
if (curr < mind) {
mind = curr;
minvcm = j;
}
if (results[j][i] < minpoll)
minpoll = results[j][i];
}
results_min[i] = minpoll;
vcm_final[i] = minvcm;
}
if (type != 1)
b43_nphy_set_rssi_2055_vcm(dev, type, vcm_final);
for (i = 0; i < 4; i++) {
offset[i] = (code * 8) - results[vcm_final[i]][i];
if (offset[i] < 0)
offset[i] = -((abs(offset[i]) + 4) / 8);
else
offset[i] = (offset[i] + 4) / 8;
if (results_min[i] == 248)
offset[i] = code - 32;
if (i % 2 == 0)
b43_nphy_scale_offset_rssi(dev, 0, offset[i], 1, 0,
type);
else
b43_nphy_scale_offset_rssi(dev, 0, offset[i], 2, 1,
type);
}
b43_radio_maskset(dev, B2055_C1_PD_RSSIMISC, 0xF8, state[0]);
b43_radio_maskset(dev, B2055_C1_PD_RSSIMISC, 0xF8, state[1]);
switch (state[2]) {
case 1:
b43_nphy_rssi_select(dev, 1, 2);
break;
case 4:
b43_nphy_rssi_select(dev, 1, 0);
break;
case 2:
b43_nphy_rssi_select(dev, 1, 1);
break;
default:
b43_nphy_rssi_select(dev, 1, 1);
break;
}
switch (state[3]) {
case 1:
b43_nphy_rssi_select(dev, 2, 2);
break;
case 4:
b43_nphy_rssi_select(dev, 2, 0);
break;
default:
b43_nphy_rssi_select(dev, 2, 1);
break;
}
b43_nphy_rssi_select(dev, 0, type);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs_save_phy[0]);
b43_radio_write16(dev, B2055_C1_PD_RXTX, regs_save_radio[0]);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs_save_phy[1]);
b43_radio_write16(dev, B2055_C2_PD_RXTX, regs_save_radio[1]);
b43_nphy_classifier(dev, 7, class);
b43_nphy_write_clip_detection(dev, clip_state);
b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:40:58 +08:00
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
{
/* TODO */
}
/*
* RSSI Calibration
* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal
*/
static void b43_nphy_rssi_cal(struct b43_wldev *dev)
{
if (dev->phy.rev >= 3) {
b43_nphy_rev3_rssi_cal(dev);
} else {
b43_nphy_rev2_rssi_cal(dev, 2);
b43_nphy_rev2_rssi_cal(dev, 0);
b43_nphy_rev2_rssi_cal(dev, 1);
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
}
b43: N-PHY: add RSSI calibration restore Signed-off-by: Rafał Miłecki <zajec5@gmail.com>` Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 22:06:47 +08:00
/*
* Restore RSSI Calibration
* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreRssiCal
*/
static void b43_nphy_restore_rssi_cal(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
u16 *rssical_radio_regs = NULL;
u16 *rssical_phy_regs = NULL;
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
if (!nphy->rssical_chanspec_2G)
return;
rssical_radio_regs = nphy->rssical_cache.rssical_radio_regs_2G;
rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_2G;
} else {
if (!nphy->rssical_chanspec_5G)
return;
rssical_radio_regs = nphy->rssical_cache.rssical_radio_regs_5G;
rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_5G;
}
/* TODO use some definitions */
b43_radio_maskset(dev, 0x602B, 0xE3, rssical_radio_regs[0]);
b43_radio_maskset(dev, 0x702B, 0xE3, rssical_radio_regs[1]);
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Z, rssical_phy_regs[0]);
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z, rssical_phy_regs[1]);
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Z, rssical_phy_regs[2]);
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Z, rssical_phy_regs[3]);
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_X, rssical_phy_regs[4]);
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_X, rssical_phy_regs[5]);
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_X, rssical_phy_regs[6]);
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_X, rssical_phy_regs[7]);
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Y, rssical_phy_regs[8]);
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Y, rssical_phy_regs[9]);
b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Y, rssical_phy_regs[10]);
b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Y, rssical_phy_regs[11]);
}
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
/*
* Init N-PHY
* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
*/
b43: Add N-PHY register definitions This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-09 23:13:56 +08:00
int b43_phy_initn(struct b43_wldev *dev)
{
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
struct ssb_bus *bus = dev->dev->bus;
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
struct b43_phy *phy = &dev->phy;
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
struct b43_phy_n *nphy = phy->n;
u8 tx_pwr_state;
struct nphy_txgains target;
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
u16 tmp;
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
enum ieee80211_band tmp2;
bool do_rssi_cal;
u16 clip[2];
bool do_cal = false;
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if ((dev->phy.rev >= 3) &&
(bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
(b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) {
chipco_set32(&dev->dev->bus->chipco, SSB_CHIPCO_CHIPCTL, 0x40);
}
nphy->deaf_count = 0;
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43_nphy_tables_init(dev);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
nphy->crsminpwr_adjusted = false;
nphy->noisevars_adjusted = false;
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
/* Clear all overrides */
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if (dev->phy.rev >= 3) {
b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S1, 0);
b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0);
b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S0, 0);
b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S1, 0);
} else {
b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0);
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, 0);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, 0);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if (dev->phy.rev < 6) {
b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0);
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
~(B43_NPHY_RFSEQMODE_CAOVER |
B43_NPHY_RFSEQMODE_TROVER));
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if (dev->phy.rev >= 3)
b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, 0);
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43_phy_write(dev, B43_NPHY_AFECTL_OVER, 0);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if (dev->phy.rev <= 2) {
tmp = (dev->phy.rev == 2) ? 0x3B : 0x40;
b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
~B43_NPHY_BPHY_CTL3_SCALE,
tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT);
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20);
b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if (bus->sprom.boardflags2_lo & 0x100 ||
(bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x8B))
b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0);
else
b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8);
b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 0xC8);
b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x50);
b43_phy_write(dev, B43_NPHY_TXRIFS_FRDEL, 0x30);
b43: Add N-PHY register definitions This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-09 23:13:56 +08:00
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
/* TODO MIMO-Config */
/* TODO Update TX/RX chain */
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
if (phy->rev < 2) {
b43_phy_write(dev, B43_NPHY_DUP40_GFBL, 0xAA8);
b43_phy_write(dev, B43_NPHY_DUP40_BL, 0x9A4);
}
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
tmp2 = b43_current_band(dev->wl);
if ((nphy->ipa2g_on && tmp2 == IEEE80211_BAND_2GHZ) ||
(nphy->ipa5g_on && tmp2 == IEEE80211_BAND_5GHZ)) {
b43_phy_set(dev, B43_NPHY_PAPD_EN0, 0x1);
b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ0, 0x007F,
nphy->papd_epsilon_offset[0] << 7);
b43_phy_set(dev, B43_NPHY_PAPD_EN1, 0x1);
b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ1, 0x007F,
nphy->papd_epsilon_offset[1] << 7);
/* TODO N PHY IPA Set TX Dig Filters */
} else if (phy->rev >= 5) {
/* TODO N PHY Ext PA Set TX Dig Filters */
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43_nphy_workarounds(dev);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
/* Reset CCA, in init code it differs a little from standard way */
/* b43_nphy_bmac_clock_fgc(dev, 1); */
tmp = b43_phy_read(dev, B43_NPHY_BBCFG);
b43_phy_write(dev, B43_NPHY_BBCFG, tmp | B43_NPHY_BBCFG_RSTCCA);
b43_phy_write(dev, B43_NPHY_BBCFG, tmp & ~B43_NPHY_BBCFG_RSTCCA);
/* b43_nphy_bmac_clock_fgc(dev, 0); */
/* TODO N PHY MAC PHY Clock Set with argument 1 */
b43: N-PHY: implement PA overriding (RF control related) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 22:02:38 +08:00
b43_nphy_pa_override(dev, false);
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
b43: N-PHY: implement PA overriding (RF control related) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 22:02:38 +08:00
b43_nphy_pa_override(dev, true);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
b43: N-PHY: add clip detection reading/writing and some classifier function Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 21:31:39 +08:00
b43_nphy_classifier(dev, 0, 0);
b43_nphy_read_clip_detection(dev, clip);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
tx_pwr_state = nphy->txpwrctrl;
/* TODO N PHY TX power control with argument 0
(turning off power control) */
/* TODO Fix the TX Power Settings */
/* TODO N PHY TX Power Control Idle TSSI */
/* TODO N PHY TX Power Control Setup */
if (phy->rev >= 3) {
/* TODO */
} else {
/* TODO Write an N PHY table with ID 26, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */
/* TODO Write an N PHY table with ID 27, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */
}
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if (nphy->phyrxchain != 3)
;/* TODO N PHY RX Core Set State with phyrxchain as argument */
if (nphy->mphase_cal_phase_id > 0)
;/* TODO PHY Periodic Calibration Multi-Phase Restart */
do_rssi_cal = false;
if (phy->rev >= 3) {
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
do_rssi_cal = (nphy->rssical_chanspec_2G == 0);
else
do_rssi_cal = (nphy->rssical_chanspec_5G == 0);
if (do_rssi_cal)
b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:40:58 +08:00
b43_nphy_rssi_cal(dev);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
else
b43: N-PHY: add RSSI calibration restore Signed-off-by: Rafał Miłecki <zajec5@gmail.com>` Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 22:06:47 +08:00
b43_nphy_restore_rssi_cal(dev);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
} else {
b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:40:58 +08:00
b43_nphy_rssi_cal(dev);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
}
if (!((nphy->measure_hold & 0x6) != 0)) {
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
do_cal = (nphy->iqcal_chanspec_2G == 0);
else
do_cal = (nphy->iqcal_chanspec_5G == 0);
if (nphy->mute)
do_cal = false;
if (do_cal) {
/* target = b43_nphy_get_tx_gains(dev); */
if (nphy->antsel_type == 2)
;/*TODO NPHY Superswitch Init with argument 1*/
if (nphy->perical != 2) {
b43: N-PHY: RSSI calibration for rev < 3 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 21:48:21 +08:00
b43_nphy_rssi_cal(dev);
b43: N-PHY: update init code to match current specs Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 20:27:29 +08:00
if (phy->rev >= 3) {
nphy->cal_orig_pwr_idx[0] =
nphy->txpwrindex[0].index_internal;
nphy->cal_orig_pwr_idx[1] =
nphy->txpwrindex[1].index_internal;
/* TODO N PHY Pre Calibrate TX Gain */
/*target = b43_nphy_get_tx_gains(dev)*/
}
}
}
}
/*
if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false)) {
if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
Call N PHY Save Cal
else if (nphy->mphase_cal_phase_id == 0)
N PHY Periodic Calibration with argument 3
} else {
b43_nphy_restore_cal(dev);
}
*/
/* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */
/* TODO N PHY TX Power Control Enable with argument tx_pwr_state */
b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015);
b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);
if (phy->rev >= 3 && phy->rev <= 6)
b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x0014);
/* b43_nphy_tx_lp_fbw(dev); */
/* TODO N PHY Spur Workaround */
b43: Add more N-PHY init code This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-18 08:09:25 +08:00
b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
b43: Add NPHY radio init code This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-14 04:23:44 +08:00
return 0;
b43: Add N-PHY register definitions This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-09 23:13:56 +08:00
}
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
static int b43_nphy_op_allocate(struct b43_wldev *dev)
{
struct b43_phy_n *nphy;
nphy = kzalloc(sizeof(*nphy), GFP_KERNEL);
if (!nphy)
return -ENOMEM;
dev->phy.n = nphy;
return 0;
}
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
static void b43_nphy_op_prepare_structs(struct b43_wldev *dev)
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
{
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = phy->n;
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
memset(nphy, 0, sizeof(*nphy));
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
//TODO init struct b43_phy_n
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
}
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
static void b43_nphy_op_free(struct b43_wldev *dev)
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
{
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = phy->n;
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
kfree(nphy);
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
phy->n = NULL;
}
static int b43_nphy_op_init(struct b43_wldev *dev)
{
return b43_phy_initn(dev);
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
}
static inline void check_phyreg(struct b43_wldev *dev, u16 offset)
{
#if B43_DEBUG
if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) {
/* OFDM registers are onnly available on A/G-PHYs */
b43err(dev->wl, "Invalid OFDM PHY access at "
"0x%04X on N-PHY\n", offset);
dump_stack();
}
if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) {
/* Ext-G registers are only available on G-PHYs */
b43err(dev->wl, "Invalid EXT-G PHY access at "
"0x%04X on N-PHY\n", offset);
dump_stack();
}
#endif /* B43_DEBUG */
}
static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg)
{
check_phyreg(dev, reg);
b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
return b43_read16(dev, B43_MMIO_PHY_DATA);
}
static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
{
check_phyreg(dev, reg);
b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
b43_write16(dev, B43_MMIO_PHY_DATA, value);
}
static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg)
{
/* Register 1 is a 32-bit register. */
B43_WARN_ON(reg == 1);
/* N-PHY needs 0x100 for read access */
reg |= 0x100;
b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
}
static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
{
/* Register 1 is a 32-bit register. */
B43_WARN_ON(reg == 1);
b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
}
static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 19:01:37 +08:00
bool blocked)
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
{//TODO
}
b43: Move Analog switching into phy code This moves the Analog switching code into the PHY files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03 18:12:20 +08:00
static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
{
b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
on ? 0 : 0x7FFF);
}
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
unsigned int new_channel)
{
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
if ((new_channel < 1) || (new_channel > 14))
return -EINVAL;
} else {
if (new_channel > 200)
return -EINVAL;
}
return nphy_channel_switch(dev, new_channel);
}
static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev)
{
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
return 1;
return 36;
}
const struct b43_phy_operations b43_phyops_n = {
.allocate = b43_nphy_op_allocate,
b43: Split PHY alloc and init This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02 19:00:34 +08:00
.free = b43_nphy_op_free,
.prepare_structs = b43_nphy_op_prepare_structs,
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
.init = b43_nphy_op_init,
.phy_read = b43_nphy_op_read,
.phy_write = b43_nphy_op_write,
.radio_read = b43_nphy_op_radio_read,
.radio_write = b43_nphy_op_radio_write,
.software_rfkill = b43_nphy_op_software_rfkill,
b43: Move Analog switching into phy code This moves the Analog switching code into the PHY files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03 18:12:20 +08:00
.switch_analog = b43_nphy_op_switch_analog,
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
.switch_channel = b43_nphy_op_switch_channel,
.get_default_chan = b43_nphy_op_get_default_chan,
b43: Rewrite TX power adjustment This patch rewrites the TX power recalculation algorithms to scale better with changed enviromnent. If there's low TX traffic, the power will be checked against the desired values every 60 seconds. If there is high TX traffic, the check is redone every 2 seconds. This improves the reaction times a lot and confuses the rate control less. It will also reduce the time it initially takes to tune to a new TX power value. With the old algorithm it could take about 30 to 45 seconds to settle to a new power value. This will happen in about two to four seconds now. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29 01:33:40 +08:00
.recalc_txpower = b43_nphy_op_recalc_txpower,
.adjust_txpower = b43_nphy_op_adjust_txpower,
b43: Implement dynamic PHY API This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-28 00:53:02 +08:00
};