OpenCloudOS-Kernel/drivers/net/wireless/ath/ath9k/xmit.c

2448 lines
63 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/dma-mapping.h>
#include "ath9k.h"
#include "ar9003_mac.h"
#define BITS_PER_BYTE 8
#define OFDM_PLCP_BITS 22
#define HT_RC_2_STREAMS(_rc) ((((_rc) & 0x78) >> 3) + 1)
#define L_STF 8
#define L_LTF 8
#define L_SIG 4
#define HT_SIG 8
#define HT_STF 4
#define HT_LTF(_ns) (4 * (_ns))
#define SYMBOL_TIME(_ns) ((_ns) << 2) /* ns * 4 us */
#define SYMBOL_TIME_HALFGI(_ns) (((_ns) * 18 + 4) / 5) /* ns * 3.6 us */
#define NUM_SYMBOLS_PER_USEC(_usec) (_usec >> 2)
#define NUM_SYMBOLS_PER_USEC_HALFGI(_usec) (((_usec*5)-4)/18)
static u16 bits_per_symbol[][2] = {
/* 20MHz 40MHz */
{ 26, 54 }, /* 0: BPSK */
{ 52, 108 }, /* 1: QPSK 1/2 */
{ 78, 162 }, /* 2: QPSK 3/4 */
{ 104, 216 }, /* 3: 16-QAM 1/2 */
{ 156, 324 }, /* 4: 16-QAM 3/4 */
{ 208, 432 }, /* 5: 64-QAM 2/3 */
{ 234, 486 }, /* 6: 64-QAM 3/4 */
{ 260, 540 }, /* 7: 64-QAM 5/6 */
};
#define IS_HT_RATE(_rate) ((_rate) & 0x80)
static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
struct ath_atx_tid *tid, struct sk_buff *skb);
static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
int tx_flags, struct ath_txq *txq);
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
struct ath_txq *txq, struct list_head *bf_q,
struct ath_tx_status *ts, int txok, int sendbar);
static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
struct list_head *head, bool internal);
static void ath_tx_rc_status(struct ath_softc *sc, struct ath_buf *bf,
struct ath_tx_status *ts, int nframes, int nbad,
int txok);
static void ath_tx_update_baw(struct ath_softc *sc, struct ath_atx_tid *tid,
int seqno);
static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
struct ath_txq *txq,
struct ath_atx_tid *tid,
struct sk_buff *skb);
enum {
MCS_HT20,
MCS_HT20_SGI,
MCS_HT40,
MCS_HT40_SGI,
};
static int ath_max_4ms_framelen[4][32] = {
[MCS_HT20] = {
3212, 6432, 9648, 12864, 19300, 25736, 28952, 32172,
6424, 12852, 19280, 25708, 38568, 51424, 57852, 64280,
9628, 19260, 28896, 38528, 57792, 65532, 65532, 65532,
12828, 25656, 38488, 51320, 65532, 65532, 65532, 65532,
},
[MCS_HT20_SGI] = {
3572, 7144, 10720, 14296, 21444, 28596, 32172, 35744,
7140, 14284, 21428, 28568, 42856, 57144, 64288, 65532,
10700, 21408, 32112, 42816, 64228, 65532, 65532, 65532,
14256, 28516, 42780, 57040, 65532, 65532, 65532, 65532,
},
[MCS_HT40] = {
6680, 13360, 20044, 26724, 40092, 53456, 60140, 65532,
13348, 26700, 40052, 53400, 65532, 65532, 65532, 65532,
20004, 40008, 60016, 65532, 65532, 65532, 65532, 65532,
26644, 53292, 65532, 65532, 65532, 65532, 65532, 65532,
},
[MCS_HT40_SGI] = {
7420, 14844, 22272, 29696, 44544, 59396, 65532, 65532,
14832, 29668, 44504, 59340, 65532, 65532, 65532, 65532,
22232, 44464, 65532, 65532, 65532, 65532, 65532, 65532,
29616, 59232, 65532, 65532, 65532, 65532, 65532, 65532,
}
};
/*********************/
/* Aggregation logic */
/*********************/
static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid)
{
struct ath_atx_ac *ac = tid->ac;
if (tid->paused)
return;
if (tid->sched)
return;
tid->sched = true;
list_add_tail(&tid->list, &ac->tid_q);
if (ac->sched)
return;
ac->sched = true;
list_add_tail(&ac->list, &txq->axq_acq);
}
static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
{
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
struct ath_txq *txq = tid->ac->txq;
WARN_ON(!tid->paused);
spin_lock_bh(&txq->axq_lock);
tid->paused = false;
if (skb_queue_empty(&tid->buf_q))
goto unlock;
ath_tx_queue_tid(txq, tid);
ath_txq_schedule(sc, txq);
unlock:
spin_unlock_bh(&txq->axq_lock);
}
static struct ath_frame_info *get_frame_info(struct sk_buff *skb)
{
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
BUILD_BUG_ON(sizeof(struct ath_frame_info) >
sizeof(tx_info->rate_driver_data));
return (struct ath_frame_info *) &tx_info->rate_driver_data[0];
}
static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
{
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
struct ath_txq *txq = tid->ac->txq;
struct sk_buff *skb;
struct ath_buf *bf;
struct list_head bf_head;
struct ath_tx_status ts;
struct ath_frame_info *fi;
INIT_LIST_HEAD(&bf_head);
memset(&ts, 0, sizeof(ts));
spin_lock_bh(&txq->axq_lock);
while ((skb = __skb_dequeue(&tid->buf_q))) {
fi = get_frame_info(skb);
bf = fi->bf;
spin_unlock_bh(&txq->axq_lock);
if (bf && fi->retries) {
list_add_tail(&bf->list, &bf_head);
ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 1);
} else {
ath_tx_send_normal(sc, txq, NULL, skb);
}
spin_lock_bh(&txq->axq_lock);
}
spin_unlock_bh(&txq->axq_lock);
}
static void ath_tx_update_baw(struct ath_softc *sc, struct ath_atx_tid *tid,
int seqno)
{
int index, cindex;
index = ATH_BA_INDEX(tid->seq_start, seqno);
cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
__clear_bit(cindex, tid->tx_buf);
while (tid->baw_head != tid->baw_tail && !test_bit(tid->baw_head, tid->tx_buf)) {
INCR(tid->seq_start, IEEE80211_SEQ_MAX);
INCR(tid->baw_head, ATH_TID_MAX_BUFS);
}
}
static void ath_tx_addto_baw(struct ath_softc *sc, struct ath_atx_tid *tid,
u16 seqno)
{
int index, cindex;
index = ATH_BA_INDEX(tid->seq_start, seqno);
cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
__set_bit(cindex, tid->tx_buf);
if (index >= ((tid->baw_tail - tid->baw_head) &
(ATH_TID_MAX_BUFS - 1))) {
tid->baw_tail = cindex;
INCR(tid->baw_tail, ATH_TID_MAX_BUFS);
}
}
/*
* TODO: For frame(s) that are in the retry state, we will reuse the
* sequence number(s) without setting the retry bit. The
* alternative is to give up on these and BAR the receiver's window
* forward.
*/
static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq,
struct ath_atx_tid *tid)
{
struct sk_buff *skb;
struct ath_buf *bf;
struct list_head bf_head;
struct ath_tx_status ts;
struct ath_frame_info *fi;
memset(&ts, 0, sizeof(ts));
INIT_LIST_HEAD(&bf_head);
while ((skb = __skb_dequeue(&tid->buf_q))) {
fi = get_frame_info(skb);
bf = fi->bf;
if (!bf) {
spin_unlock(&txq->axq_lock);
ath_tx_complete(sc, skb, ATH_TX_ERROR, txq);
spin_lock(&txq->axq_lock);
continue;
}
list_add_tail(&bf->list, &bf_head);
if (fi->retries)
ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
spin_unlock(&txq->axq_lock);
ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
spin_lock(&txq->axq_lock);
}
tid->seq_next = tid->seq_start;
tid->baw_tail = tid->baw_head;
}
static void ath_tx_set_retry(struct ath_softc *sc, struct ath_txq *txq,
struct sk_buff *skb)
{
struct ath_frame_info *fi = get_frame_info(skb);
struct ieee80211_hdr *hdr;
TX_STAT_INC(txq->axq_qnum, a_retries);
if (fi->retries++ > 0)
return;
hdr = (struct ieee80211_hdr *)skb->data;
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_RETRY);
}
static struct ath_buf *ath_tx_get_buffer(struct ath_softc *sc)
{
struct ath_buf *bf = NULL;
spin_lock_bh(&sc->tx.txbuflock);
if (unlikely(list_empty(&sc->tx.txbuf))) {
spin_unlock_bh(&sc->tx.txbuflock);
return NULL;
}
bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list);
list_del(&bf->list);
spin_unlock_bh(&sc->tx.txbuflock);
return bf;
}
static void ath_tx_return_buffer(struct ath_softc *sc, struct ath_buf *bf)
{
spin_lock_bh(&sc->tx.txbuflock);
list_add_tail(&bf->list, &sc->tx.txbuf);
spin_unlock_bh(&sc->tx.txbuflock);
}
static struct ath_buf* ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf)
{
struct ath_buf *tbf;
tbf = ath_tx_get_buffer(sc);
if (WARN_ON(!tbf))
return NULL;
ATH_TXBUF_RESET(tbf);
tbf->bf_mpdu = bf->bf_mpdu;
tbf->bf_buf_addr = bf->bf_buf_addr;
memcpy(tbf->bf_desc, bf->bf_desc, sc->sc_ah->caps.tx_desc_len);
tbf->bf_state = bf->bf_state;
return tbf;
}
static void ath_tx_count_frames(struct ath_softc *sc, struct ath_buf *bf,
struct ath_tx_status *ts, int txok,
int *nframes, int *nbad)
{
struct ath_frame_info *fi;
u16 seq_st = 0;
u32 ba[WME_BA_BMP_SIZE >> 5];
int ba_index;
int isaggr = 0;
*nbad = 0;
*nframes = 0;
isaggr = bf_isaggr(bf);
if (isaggr) {
seq_st = ts->ts_seqnum;
memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);
}
while (bf) {
fi = get_frame_info(bf->bf_mpdu);
ba_index = ATH_BA_INDEX(seq_st, bf->bf_state.seqno);
(*nframes)++;
if (!txok || (isaggr && !ATH_BA_ISSET(ba, ba_index)))
(*nbad)++;
bf = bf->bf_next;
}
}
static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
struct ath_buf *bf, struct list_head *bf_q,
struct ath_tx_status *ts, int txok, bool retry)
{
struct ath_node *an = NULL;
struct sk_buff *skb;
struct ieee80211_sta *sta;
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *tx_info;
struct ath_atx_tid *tid = NULL;
struct ath_buf *bf_next, *bf_last = bf->bf_lastbf;
struct list_head bf_head;
struct sk_buff_head bf_pending;
u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0;
u32 ba[WME_BA_BMP_SIZE >> 5];
int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
bool rc_update = true;
struct ieee80211_tx_rate rates[4];
struct ath_frame_info *fi;
int nframes;
u8 tidno;
bool clear_filter;
skb = bf->bf_mpdu;
hdr = (struct ieee80211_hdr *)skb->data;
tx_info = IEEE80211_SKB_CB(skb);
memcpy(rates, tx_info->control.rates, sizeof(rates));
rcu_read_lock();
sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr1, hdr->addr2);
if (!sta) {
rcu_read_unlock();
INIT_LIST_HEAD(&bf_head);
while (bf) {
bf_next = bf->bf_next;
if (!bf->bf_stale || bf_next != NULL)
list_move_tail(&bf->list, &bf_head);
ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
0, 0);
bf = bf_next;
}
return;
}
an = (struct ath_node *)sta->drv_priv;
tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
tid = ATH_AN_2_TID(an, tidno);
/*
* The hardware occasionally sends a tx status for the wrong TID.
* In this case, the BA status cannot be considered valid and all
* subframes need to be retransmitted
*/
if (tidno != ts->tid)
txok = false;
isaggr = bf_isaggr(bf);
memset(ba, 0, WME_BA_BMP_SIZE >> 3);
if (isaggr && txok) {
if (ts->ts_flags & ATH9K_TX_BA) {
seq_st = ts->ts_seqnum;
memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);
} else {
/*
* AR5416 can become deaf/mute when BA
* issue happens. Chip needs to be reset.
* But AP code may have sychronization issues
* when perform internal reset in this routine.
* Only enable reset in STA mode for now.
*/
if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION)
needreset = 1;
}
}
__skb_queue_head_init(&bf_pending);
ath_tx_count_frames(sc, bf, ts, txok, &nframes, &nbad);
while (bf) {
u16 seqno = bf->bf_state.seqno;
txfail = txpending = sendbar = 0;
bf_next = bf->bf_next;
skb = bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
fi = get_frame_info(skb);
if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) {
/* transmit completion, subframe is
* acked by block ack */
acked_cnt++;
} else if (!isaggr && txok) {
/* transmit completion */
acked_cnt++;
} else {
if ((tid->state & AGGR_CLEANUP) || !retry) {
/*
* cleanup in progress, just fail
* the un-acked sub-frames
*/
txfail = 1;
} else if (fi->retries < ATH_MAX_SW_RETRIES) {
if (!(ts->ts_status & ATH9K_TXERR_FILT) ||
!an->sleeping)
ath_tx_set_retry(sc, txq, bf->bf_mpdu);
clear_filter = true;
txpending = 1;
} else {
txfail = 1;
sendbar = 1;
txfail_cnt++;
}
}
/*
* Make sure the last desc is reclaimed if it
* not a holding desc.
*/
INIT_LIST_HEAD(&bf_head);
if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ||
bf_next != NULL || !bf_last->bf_stale)
list_move_tail(&bf->list, &bf_head);
if (!txpending || (tid->state & AGGR_CLEANUP)) {
/*
* complete the acked-ones/xretried ones; update
* block-ack window
*/
spin_lock_bh(&txq->axq_lock);
ath_tx_update_baw(sc, tid, seqno);
spin_unlock_bh(&txq->axq_lock);
if (rc_update && (acked_cnt == 1 || txfail_cnt == 1)) {
memcpy(tx_info->control.rates, rates, sizeof(rates));
ath_tx_rc_status(sc, bf, ts, nframes, nbad, txok);
rc_update = false;
}
ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
!txfail, sendbar);
} else {
/* retry the un-acked ones */
if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)) {
if (bf->bf_next == NULL && bf_last->bf_stale) {
struct ath_buf *tbf;
tbf = ath_clone_txbuf(sc, bf_last);
/*
* Update tx baw and complete the
* frame with failed status if we
* run out of tx buf.
*/
if (!tbf) {
spin_lock_bh(&txq->axq_lock);
ath_tx_update_baw(sc, tid, seqno);
spin_unlock_bh(&txq->axq_lock);
ath_tx_complete_buf(sc, bf, txq,
&bf_head,
ts, 0, 1);
break;
}
fi->bf = tbf;
}
}
/*
* Put this buffer to the temporary pending
* queue to retain ordering
*/
__skb_queue_tail(&bf_pending, skb);
}
bf = bf_next;
}
/* prepend un-acked frames to the beginning of the pending frame queue */
if (!skb_queue_empty(&bf_pending)) {
if (an->sleeping)
ieee80211_sta_set_tim(sta);
spin_lock_bh(&txq->axq_lock);
if (clear_filter)
tid->ac->clear_ps_filter = true;
skb_queue_splice(&bf_pending, &tid->buf_q);
if (!an->sleeping)
ath_tx_queue_tid(txq, tid);
spin_unlock_bh(&txq->axq_lock);
}
if (tid->state & AGGR_CLEANUP) {
ath_tx_flush_tid(sc, tid);
if (tid->baw_head == tid->baw_tail) {
tid->state &= ~AGGR_ADDBA_COMPLETE;
tid->state &= ~AGGR_CLEANUP;
}
}
rcu_read_unlock();
if (needreset)
ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
}
static bool ath_lookup_legacy(struct ath_buf *bf)
{
struct sk_buff *skb;
struct ieee80211_tx_info *tx_info;
struct ieee80211_tx_rate *rates;
int i;
skb = bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
rates = tx_info->control.rates;
for (i = 0; i < 4; i++) {
if (!rates[i].count || rates[i].idx < 0)
break;
if (!(rates[i].flags & IEEE80211_TX_RC_MCS))
return true;
}
return false;
}
static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
struct ath_atx_tid *tid)
{
struct sk_buff *skb;
struct ieee80211_tx_info *tx_info;
struct ieee80211_tx_rate *rates;
u32 max_4ms_framelen, frmlen;
u16 aggr_limit, legacy = 0;
int i;
skb = bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
rates = tx_info->control.rates;
/*
* Find the lowest frame length among the rate series that will have a
* 4ms transmit duration.
* TODO - TXOP limit needs to be considered.
*/
max_4ms_framelen = ATH_AMPDU_LIMIT_MAX;
for (i = 0; i < 4; i++) {
if (rates[i].count) {
int modeidx;
if (!(rates[i].flags & IEEE80211_TX_RC_MCS)) {
legacy = 1;
break;
}
if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
modeidx = MCS_HT40;
else
modeidx = MCS_HT20;
if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
modeidx++;
frmlen = ath_max_4ms_framelen[modeidx][rates[i].idx];
max_4ms_framelen = min(max_4ms_framelen, frmlen);
}
}
/*
* limit aggregate size by the minimum rate if rate selected is
* not a probe rate, if rate selected is a probe rate then
* avoid aggregation of this packet.
*/
if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy)
return 0;
if (sc->sc_flags & SC_OP_BT_PRIORITY_DETECTED)
aggr_limit = min((max_4ms_framelen * 3) / 8,
(u32)ATH_AMPDU_LIMIT_MAX);
else
aggr_limit = min(max_4ms_framelen,
(u32)ATH_AMPDU_LIMIT_MAX);
/*
* h/w can accept aggregates up to 16 bit lengths (65535).
* The IE, however can hold up to 65536, which shows up here
* as zero. Ignore 65536 since we are constrained by hw.
*/
if (tid->an->maxampdu)
aggr_limit = min(aggr_limit, tid->an->maxampdu);
return aggr_limit;
}
/*
* Returns the number of delimiters to be added to
* meet the minimum required mpdudensity.
*/
static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
struct ath_buf *bf, u16 frmlen,
bool first_subfrm)
{
#define FIRST_DESC_NDELIMS 60
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
u32 nsymbits, nsymbols;
u16 minlen;
u8 flags, rix;
int width, streams, half_gi, ndelim, mindelim;
struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
/* Select standard number of delimiters based on frame length alone */
ndelim = ATH_AGGR_GET_NDELIM(frmlen);
/*
* If encryption enabled, hardware requires some more padding between
* subframes.
* TODO - this could be improved to be dependent on the rate.
* The hardware can keep up at lower rates, but not higher rates
*/
if ((fi->keyix != ATH9K_TXKEYIX_INVALID) &&
!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA))
ndelim += ATH_AGGR_ENCRYPTDELIM;
/*
* Add delimiter when using RTS/CTS with aggregation
* and non enterprise AR9003 card
*/
if (first_subfrm && !AR_SREV_9580_10_OR_LATER(sc->sc_ah) &&
(sc->sc_ah->ent_mode & AR_ENT_OTP_MIN_PKT_SIZE_DISABLE))
ndelim = max(ndelim, FIRST_DESC_NDELIMS);
/*
* Convert desired mpdu density from microeconds to bytes based
* on highest rate in rate series (i.e. first rate) to determine
* required minimum length for subframe. Take into account
* whether high rate is 20 or 40Mhz and half or full GI.
*
* If there is no mpdu density restriction, no further calculation
* is needed.
*/
if (tid->an->mpdudensity == 0)
return ndelim;
rix = tx_info->control.rates[0].idx;
flags = tx_info->control.rates[0].flags;
width = (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ? 1 : 0;
half_gi = (flags & IEEE80211_TX_RC_SHORT_GI) ? 1 : 0;
if (half_gi)
nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(tid->an->mpdudensity);
else
nsymbols = NUM_SYMBOLS_PER_USEC(tid->an->mpdudensity);
if (nsymbols == 0)
nsymbols = 1;
streams = HT_RC_2_STREAMS(rix);
nsymbits = bits_per_symbol[rix % 8][width] * streams;
minlen = (nsymbols * nsymbits) / BITS_PER_BYTE;
if (frmlen < minlen) {
mindelim = (minlen - frmlen) / ATH_AGGR_DELIM_SZ;
ndelim = max(mindelim, ndelim);
}
return ndelim;
}
static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
struct ath_txq *txq,
struct ath_atx_tid *tid,
struct list_head *bf_q,
int *aggr_len)
{
#define PADBYTES(_len) ((4 - ((_len) % 4)) % 4)
struct ath_buf *bf, *bf_first = NULL, *bf_prev = NULL;
int rl = 0, nframes = 0, ndelim, prev_al = 0;
u16 aggr_limit = 0, al = 0, bpad = 0,
al_delta, h_baw = tid->baw_size / 2;
enum ATH_AGGR_STATUS status = ATH_AGGR_DONE;
struct ieee80211_tx_info *tx_info;
struct ath_frame_info *fi;
struct sk_buff *skb;
u16 seqno;
do {
skb = skb_peek(&tid->buf_q);
fi = get_frame_info(skb);
bf = fi->bf;
if (!fi->bf)
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf)
continue;
bf->bf_state.bf_type = BUF_AMPDU | BUF_AGGR;
seqno = bf->bf_state.seqno;
if (!bf_first)
bf_first = bf;
/* do not step over block-ack window */
if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno)) {
status = ATH_AGGR_BAW_CLOSED;
break;
}
if (!rl) {
aggr_limit = ath_lookup_rate(sc, bf, tid);
rl = 1;
}
/* do not exceed aggregation limit */
al_delta = ATH_AGGR_DELIM_SZ + fi->framelen;
if (nframes &&
((aggr_limit < (al + bpad + al_delta + prev_al)) ||
ath_lookup_legacy(bf))) {
status = ATH_AGGR_LIMITED;
break;
}
tx_info = IEEE80211_SKB_CB(bf->bf_mpdu);
if (nframes && (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE))
break;
/* do not exceed subframe limit */
if (nframes >= min((int)h_baw, ATH_AMPDU_SUBFRAME_DEFAULT)) {
status = ATH_AGGR_LIMITED;
break;
}
/* add padding for previous frame to aggregation length */
al += bpad + al_delta;
/*
* Get the delimiters needed to meet the MPDU
* density for this node.
*/
ndelim = ath_compute_num_delims(sc, tid, bf_first, fi->framelen,
!nframes);
bpad = PADBYTES(al_delta) + (ndelim << 2);
nframes++;
bf->bf_next = NULL;
/* link buffers of this frame to the aggregate */
if (!fi->retries)
ath_tx_addto_baw(sc, tid, seqno);
bf->bf_state.ndelim = ndelim;
__skb_unlink(skb, &tid->buf_q);
list_add_tail(&bf->list, bf_q);
if (bf_prev)
bf_prev->bf_next = bf;
bf_prev = bf;
} while (!skb_queue_empty(&tid->buf_q));
*aggr_len = al;
return status;
#undef PADBYTES
}
/*
* rix - rate index
* pktlen - total bytes (delims + data + fcs + pads + pad delims)
* width - 0 for 20 MHz, 1 for 40 MHz
* half_gi - to use 4us v/s 3.6 us for symbol time
*/
static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, int pktlen,
int width, int half_gi, bool shortPreamble)
{
u32 nbits, nsymbits, duration, nsymbols;
int streams;
/* find number of symbols: PLCP + data */
streams = HT_RC_2_STREAMS(rix);
nbits = (pktlen << 3) + OFDM_PLCP_BITS;
nsymbits = bits_per_symbol[rix % 8][width] * streams;
nsymbols = (nbits + nsymbits - 1) / nsymbits;
if (!half_gi)
duration = SYMBOL_TIME(nsymbols);
else
duration = SYMBOL_TIME_HALFGI(nsymbols);
/* addup duration for legacy/ht training and signal fields */
duration += L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
return duration;
}
static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
struct ath_tx_info *info, int len)
{
struct ath_hw *ah = sc->sc_ah;
struct sk_buff *skb;
struct ieee80211_tx_info *tx_info;
struct ieee80211_tx_rate *rates;
const struct ieee80211_rate *rate;
struct ieee80211_hdr *hdr;
int i;
u8 rix = 0;
skb = bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
rates = tx_info->control.rates;
hdr = (struct ieee80211_hdr *)skb->data;
/* set dur_update_en for l-sig computation except for PS-Poll frames */
info->dur_update = !ieee80211_is_pspoll(hdr->frame_control);
/*
* We check if Short Preamble is needed for the CTS rate by
* checking the BSS's global flag.
* But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
*/
rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info);
info->rtscts_rate = rate->hw_value;
if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
info->rtscts_rate |= rate->hw_value_short;
for (i = 0; i < 4; i++) {
bool is_40, is_sgi, is_sp;
int phy;
if (!rates[i].count || (rates[i].idx < 0))
continue;
rix = rates[i].idx;
info->rates[i].Tries = rates[i].count;
if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
info->rates[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
info->flags |= ATH9K_TXDESC_RTSENA;
} else if (rates[i].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
info->rates[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
info->flags |= ATH9K_TXDESC_CTSENA;
}
if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
info->rates[i].RateFlags |= ATH9K_RATESERIES_2040;
if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
info->rates[i].RateFlags |= ATH9K_RATESERIES_HALFGI;
is_sgi = !!(rates[i].flags & IEEE80211_TX_RC_SHORT_GI);
is_40 = !!(rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH);
is_sp = !!(rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
if (rates[i].flags & IEEE80211_TX_RC_MCS) {
/* MCS rates */
info->rates[i].Rate = rix | 0x80;
info->rates[i].ChSel = ath_txchainmask_reduction(sc,
ah->txchainmask, info->rates[i].Rate);
info->rates[i].PktDuration = ath_pkt_duration(sc, rix, len,
is_40, is_sgi, is_sp);
if (rix < 8 && (tx_info->flags & IEEE80211_TX_CTL_STBC))
info->rates[i].RateFlags |= ATH9K_RATESERIES_STBC;
continue;
}
/* legacy rates */
if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
!(rate->flags & IEEE80211_RATE_ERP_G))
phy = WLAN_RC_PHY_CCK;
else
phy = WLAN_RC_PHY_OFDM;
rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
info->rates[i].Rate = rate->hw_value;
if (rate->hw_value_short) {
if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
info->rates[i].Rate |= rate->hw_value_short;
} else {
is_sp = false;
}
if (bf->bf_state.bfs_paprd)
info->rates[i].ChSel = ah->txchainmask;
else
info->rates[i].ChSel = ath_txchainmask_reduction(sc,
ah->txchainmask, info->rates[i].Rate);
info->rates[i].PktDuration = ath9k_hw_computetxtime(sc->sc_ah,
phy, rate->bitrate * 100, len, rix, is_sp);
}
/* For AR5416 - RTS cannot be followed by a frame larger than 8K */
if (bf_isaggr(bf) && (len > sc->sc_ah->caps.rts_aggr_limit))
info->flags &= ~ATH9K_TXDESC_RTSENA;
/* ATH9K_TXDESC_RTSENA and ATH9K_TXDESC_CTSENA are mutually exclusive. */
if (info->flags & ATH9K_TXDESC_RTSENA)
info->flags &= ~ATH9K_TXDESC_CTSENA;
}
static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb)
{
struct ieee80211_hdr *hdr;
enum ath9k_pkt_type htype;
__le16 fc;
hdr = (struct ieee80211_hdr *)skb->data;
fc = hdr->frame_control;
if (ieee80211_is_beacon(fc))
htype = ATH9K_PKT_TYPE_BEACON;
else if (ieee80211_is_probe_resp(fc))
htype = ATH9K_PKT_TYPE_PROBE_RESP;
else if (ieee80211_is_atim(fc))
htype = ATH9K_PKT_TYPE_ATIM;
else if (ieee80211_is_pspoll(fc))
htype = ATH9K_PKT_TYPE_PSPOLL;
else
htype = ATH9K_PKT_TYPE_NORMAL;
return htype;
}
static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
struct ath_txq *txq, int len)
{
struct ath_hw *ah = sc->sc_ah;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(bf->bf_mpdu);
struct ath_buf *bf_first = bf;
struct ath_tx_info info;
bool aggr = !!(bf->bf_state.bf_type & BUF_AGGR);
memset(&info, 0, sizeof(info));
info.is_first = true;
info.is_last = true;
info.txpower = MAX_RATE_POWER;
info.qcu = txq->axq_qnum;
info.flags = ATH9K_TXDESC_INTREQ;
if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
info.flags |= ATH9K_TXDESC_NOACK;
if (tx_info->flags & IEEE80211_TX_CTL_LDPC)
info.flags |= ATH9K_TXDESC_LDPC;
ath_buf_set_rate(sc, bf, &info, len);
if (tx_info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
info.flags |= ATH9K_TXDESC_CLRDMASK;
if (bf->bf_state.bfs_paprd)
info.flags |= (u32) bf->bf_state.bfs_paprd << ATH9K_TXDESC_PAPRD_S;
while (bf) {
struct sk_buff *skb = bf->bf_mpdu;
struct ath_frame_info *fi = get_frame_info(skb);
info.type = get_hw_packet_type(skb);
if (bf->bf_next)
info.link = bf->bf_next->bf_daddr;
else
info.link = 0;
info.buf_addr[0] = bf->bf_buf_addr;
info.buf_len[0] = skb->len;
info.pkt_len = fi->framelen;
info.keyix = fi->keyix;
info.keytype = fi->keytype;
if (aggr) {
if (bf == bf_first)
info.aggr = AGGR_BUF_FIRST;
else if (!bf->bf_next)
info.aggr = AGGR_BUF_LAST;
else
info.aggr = AGGR_BUF_MIDDLE;
info.ndelim = bf->bf_state.ndelim;
info.aggr_len = len;
}
ath9k_hw_set_txdesc(ah, bf->bf_desc, &info);
bf = bf->bf_next;
}
}
static void ath_tx_sched_aggr(struct ath_softc *sc, struct ath_txq *txq,
struct ath_atx_tid *tid)
{
struct ath_buf *bf;
enum ATH_AGGR_STATUS status;
struct ieee80211_tx_info *tx_info;
struct list_head bf_q;
int aggr_len;
do {
if (skb_queue_empty(&tid->buf_q))
return;
INIT_LIST_HEAD(&bf_q);
status = ath_tx_form_aggr(sc, txq, tid, &bf_q, &aggr_len);
/*
* no frames picked up to be aggregated;
* block-ack window is not open.
*/
if (list_empty(&bf_q))
break;
bf = list_first_entry(&bf_q, struct ath_buf, list);
bf->bf_lastbf = list_entry(bf_q.prev, struct ath_buf, list);
tx_info = IEEE80211_SKB_CB(bf->bf_mpdu);
if (tid->ac->clear_ps_filter) {
tid->ac->clear_ps_filter = false;
tx_info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
} else {
tx_info->flags &= ~IEEE80211_TX_CTL_CLEAR_PS_FILT;
}
/* if only one frame, send as non-aggregate */
if (bf == bf->bf_lastbf) {
aggr_len = get_frame_info(bf->bf_mpdu)->framelen;
bf->bf_state.bf_type = BUF_AMPDU;
} else {
TX_STAT_INC(txq->axq_qnum, a_aggr);
}
ath_tx_fill_desc(sc, bf, txq, aggr_len);
ath_tx_txqaddbuf(sc, txq, &bf_q, false);
} while (txq->axq_ampdu_depth < ATH_AGGR_MIN_QDEPTH &&
status != ATH_AGGR_BAW_CLOSED);
}
int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
u16 tid, u16 *ssn)
{
struct ath_atx_tid *txtid;
struct ath_node *an;
an = (struct ath_node *)sta->drv_priv;
txtid = ATH_AN_2_TID(an, tid);
if (txtid->state & (AGGR_CLEANUP | AGGR_ADDBA_COMPLETE))
return -EAGAIN;
txtid->state |= AGGR_ADDBA_PROGRESS;
txtid->paused = true;
*ssn = txtid->seq_start = txtid->seq_next;
memset(txtid->tx_buf, 0, sizeof(txtid->tx_buf));
txtid->baw_head = txtid->baw_tail = 0;
return 0;
}
void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
struct ath_txq *txq = txtid->ac->txq;
if (txtid->state & AGGR_CLEANUP)
return;
if (!(txtid->state & AGGR_ADDBA_COMPLETE)) {
txtid->state &= ~AGGR_ADDBA_PROGRESS;
return;
}
spin_lock_bh(&txq->axq_lock);
txtid->paused = true;
/*
* If frames are still being transmitted for this TID, they will be
* cleaned up during tx completion. To prevent race conditions, this
* TID can only be reused after all in-progress subframes have been
* completed.
*/
if (txtid->baw_head != txtid->baw_tail)
txtid->state |= AGGR_CLEANUP;
else
txtid->state &= ~AGGR_ADDBA_COMPLETE;
spin_unlock_bh(&txq->axq_lock);
ath_tx_flush_tid(sc, txtid);
}
bool ath_tx_aggr_sleep(struct ath_softc *sc, struct ath_node *an)
{
struct ath_atx_tid *tid;
struct ath_atx_ac *ac;
struct ath_txq *txq;
bool buffered = false;
int tidno;
for (tidno = 0, tid = &an->tid[tidno];
tidno < WME_NUM_TID; tidno++, tid++) {
if (!tid->sched)
continue;
ac = tid->ac;
txq = ac->txq;
spin_lock_bh(&txq->axq_lock);
if (!skb_queue_empty(&tid->buf_q))
buffered = true;
tid->sched = false;
list_del(&tid->list);
if (ac->sched) {
ac->sched = false;
list_del(&ac->list);
}
spin_unlock_bh(&txq->axq_lock);
}
return buffered;
}
void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an)
{
struct ath_atx_tid *tid;
struct ath_atx_ac *ac;
struct ath_txq *txq;
int tidno;
for (tidno = 0, tid = &an->tid[tidno];
tidno < WME_NUM_TID; tidno++, tid++) {
ac = tid->ac;
txq = ac->txq;
spin_lock_bh(&txq->axq_lock);
ac->clear_ps_filter = true;
if (!skb_queue_empty(&tid->buf_q) && !tid->paused) {
ath_tx_queue_tid(txq, tid);
ath_txq_schedule(sc, txq);
}
spin_unlock_bh(&txq->axq_lock);
}
}
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
{
struct ath_atx_tid *txtid;
struct ath_node *an;
an = (struct ath_node *)sta->drv_priv;
if (sc->sc_flags & SC_OP_TXAGGR) {
txtid = ATH_AN_2_TID(an, tid);
txtid->baw_size =
IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor;
txtid->state |= AGGR_ADDBA_COMPLETE;
txtid->state &= ~AGGR_ADDBA_PROGRESS;
ath_tx_resume_tid(sc, txtid);
}
}
/********************/
/* Queue Management */
/********************/
static void ath_txq_drain_pending_buffers(struct ath_softc *sc,
struct ath_txq *txq)
{
struct ath_atx_ac *ac, *ac_tmp;
struct ath_atx_tid *tid, *tid_tmp;
list_for_each_entry_safe(ac, ac_tmp, &txq->axq_acq, list) {
list_del(&ac->list);
ac->sched = false;
list_for_each_entry_safe(tid, tid_tmp, &ac->tid_q, list) {
list_del(&tid->list);
tid->sched = false;
ath_tid_drain(sc, txq, tid);
}
}
}
struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_tx_queue_info qi;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
static const int subtype_txq_to_hwq[] = {
[WME_AC_BE] = ATH_TXQ_AC_BE,
[WME_AC_BK] = ATH_TXQ_AC_BK,
[WME_AC_VI] = ATH_TXQ_AC_VI,
[WME_AC_VO] = ATH_TXQ_AC_VO,
};
int axq_qnum, i;
memset(&qi, 0, sizeof(qi));
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
qi.tqi_subtype = subtype_txq_to_hwq[subtype];
qi.tqi_aifs = ATH9K_TXQ_USEDEFAULT;
qi.tqi_cwmin = ATH9K_TXQ_USEDEFAULT;
qi.tqi_cwmax = ATH9K_TXQ_USEDEFAULT;
qi.tqi_physCompBuf = 0;
/*
* Enable interrupts only for EOL and DESC conditions.
* We mark tx descriptors to receive a DESC interrupt
* when a tx queue gets deep; otherwise waiting for the
* EOL to reap descriptors. Note that this is done to
* reduce interrupt load and this only defers reaping
* descriptors, never transmitting frames. Aside from
* reducing interrupts this also permits more concurrency.
* The only potential downside is if the tx queue backs
* up in which case the top half of the kernel may backup
* due to a lack of tx descriptors.
*
* The UAPSD queue is an exception, since we take a desc-
* based intr on the EOSP frames.
*/
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
qi.tqi_qflags = TXQ_FLAG_TXOKINT_ENABLE |
TXQ_FLAG_TXERRINT_ENABLE;
} else {
if (qtype == ATH9K_TX_QUEUE_UAPSD)
qi.tqi_qflags = TXQ_FLAG_TXDESCINT_ENABLE;
else
qi.tqi_qflags = TXQ_FLAG_TXEOLINT_ENABLE |
TXQ_FLAG_TXDESCINT_ENABLE;
}
axq_qnum = ath9k_hw_setuptxqueue(ah, qtype, &qi);
if (axq_qnum == -1) {
/*
* NB: don't print a message, this happens
* normally on parts with too few tx queues
*/
return NULL;
}
if (axq_qnum >= ARRAY_SIZE(sc->tx.txq)) {
ath_err(common, "qnum %u out of range, max %zu!\n",
axq_qnum, ARRAY_SIZE(sc->tx.txq));
ath9k_hw_releasetxqueue(ah, axq_qnum);
return NULL;
}
if (!ATH_TXQ_SETUP(sc, axq_qnum)) {
struct ath_txq *txq = &sc->tx.txq[axq_qnum];
txq->axq_qnum = axq_qnum;
txq->mac80211_qnum = -1;
txq->axq_link = NULL;
INIT_LIST_HEAD(&txq->axq_q);
INIT_LIST_HEAD(&txq->axq_acq);
spin_lock_init(&txq->axq_lock);
txq->axq_depth = 0;
txq->axq_ampdu_depth = 0;
txq->axq_tx_inprogress = false;
sc->tx.txqsetup |= 1<<axq_qnum;
txq->txq_headidx = txq->txq_tailidx = 0;
for (i = 0; i < ATH_TXFIFO_DEPTH; i++)
INIT_LIST_HEAD(&txq->txq_fifo[i]);
}
return &sc->tx.txq[axq_qnum];
}
int ath_txq_update(struct ath_softc *sc, int qnum,
struct ath9k_tx_queue_info *qinfo)
{
struct ath_hw *ah = sc->sc_ah;
int error = 0;
struct ath9k_tx_queue_info qi;
if (qnum == sc->beacon.beaconq) {
/*
* XXX: for beacon queue, we just save the parameter.
* It will be picked up by ath_beaconq_config when
* it's necessary.
*/
sc->beacon.beacon_qi = *qinfo;
return 0;
}
BUG_ON(sc->tx.txq[qnum].axq_qnum != qnum);
ath9k_hw_get_txq_props(ah, qnum, &qi);
qi.tqi_aifs = qinfo->tqi_aifs;
qi.tqi_cwmin = qinfo->tqi_cwmin;
qi.tqi_cwmax = qinfo->tqi_cwmax;
qi.tqi_burstTime = qinfo->tqi_burstTime;
qi.tqi_readyTime = qinfo->tqi_readyTime;
if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) {
ath_err(ath9k_hw_common(sc->sc_ah),
"Unable to update hardware queue %u!\n", qnum);
error = -EIO;
} else {
ath9k_hw_resettxqueue(ah, qnum);
}
return error;
}
int ath_cabq_update(struct ath_softc *sc)
{
struct ath9k_tx_queue_info qi;
struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
int qnum = sc->beacon.cabq->axq_qnum;
ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi);
/*
* Ensure the readytime % is within the bounds.
*/
if (sc->config.cabqReadytime < ATH9K_READY_TIME_LO_BOUND)
sc->config.cabqReadytime = ATH9K_READY_TIME_LO_BOUND;
else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
qi.tqi_readyTime = (cur_conf->beacon_interval *
sc->config.cabqReadytime) / 100;
ath_txq_update(sc, qnum, &qi);
return 0;
}
static bool bf_is_ampdu_not_probing(struct ath_buf *bf)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
}
static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq,
struct list_head *list, bool retry_tx)
__releases(txq->axq_lock)
__acquires(txq->axq_lock)
{
struct ath_buf *bf, *lastbf;
struct list_head bf_head;
struct ath_tx_status ts;
memset(&ts, 0, sizeof(ts));
INIT_LIST_HEAD(&bf_head);
while (!list_empty(list)) {
bf = list_first_entry(list, struct ath_buf, list);
if (bf->bf_stale) {
list_del(&bf->list);
ath_tx_return_buffer(sc, bf);
continue;
}
lastbf = bf->bf_lastbf;
list_cut_position(&bf_head, list, &lastbf->list);
txq->axq_depth--;
if (bf_is_ampdu_not_probing(bf))
txq->axq_ampdu_depth--;
spin_unlock_bh(&txq->axq_lock);
if (bf_isampdu(bf))
ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0,
retry_tx);
else
ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
spin_lock_bh(&txq->axq_lock);
}
}
/*
* Drain a given TX queue (could be Beacon or Data)
*
* This assumes output has been stopped and
* we do not need to block ath_tx_tasklet.
*/
void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
{
spin_lock_bh(&txq->axq_lock);
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
int idx = txq->txq_tailidx;
while (!list_empty(&txq->txq_fifo[idx])) {
ath_drain_txq_list(sc, txq, &txq->txq_fifo[idx],
retry_tx);
INCR(idx, ATH_TXFIFO_DEPTH);
}
txq->txq_tailidx = idx;
}
txq->axq_link = NULL;
txq->axq_tx_inprogress = false;
ath_drain_txq_list(sc, txq, &txq->axq_q, retry_tx);
/* flush any pending frames if aggregation is enabled */
if ((sc->sc_flags & SC_OP_TXAGGR) && !retry_tx)
ath_txq_drain_pending_buffers(sc, txq);
spin_unlock_bh(&txq->axq_lock);
}
bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_txq *txq;
int i, npend = 0;
if (sc->sc_flags & SC_OP_INVALID)
return true;
ath9k_hw_abort_tx_dma(ah);
/* Check if any queue remains active */
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (!ATH_TXQ_SETUP(sc, i))
continue;
npend += ath9k_hw_numtxpending(ah, sc->tx.txq[i].axq_qnum);
}
if (npend)
ath_err(common, "Failed to stop TX DMA!\n");
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (!ATH_TXQ_SETUP(sc, i))
continue;
/*
* The caller will resume queues with ieee80211_wake_queues.
* Mark the queue as not stopped to prevent ath_tx_complete
* from waking the queue too early.
*/
txq = &sc->tx.txq[i];
txq->stopped = false;
ath_draintxq(sc, txq, retry_tx);
}
return !npend;
}
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
{
ath9k_hw_releasetxqueue(sc->sc_ah, txq->axq_qnum);
sc->tx.txqsetup &= ~(1<<txq->axq_qnum);
}
/* For each axq_acq entry, for each tid, try to schedule packets
* for transmit until ampdu_depth has reached min Q depth.
*/
void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq)
{
struct ath_atx_ac *ac, *ac_tmp, *last_ac;
struct ath_atx_tid *tid, *last_tid;
if (work_pending(&sc->hw_reset_work) || list_empty(&txq->axq_acq) ||
txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH)
return;
ac = list_first_entry(&txq->axq_acq, struct ath_atx_ac, list);
last_ac = list_entry(txq->axq_acq.prev, struct ath_atx_ac, list);
list_for_each_entry_safe(ac, ac_tmp, &txq->axq_acq, list) {
last_tid = list_entry(ac->tid_q.prev, struct ath_atx_tid, list);
list_del(&ac->list);
ac->sched = false;
while (!list_empty(&ac->tid_q)) {
tid = list_first_entry(&ac->tid_q, struct ath_atx_tid,
list);
list_del(&tid->list);
tid->sched = false;
if (tid->paused)
continue;
ath_tx_sched_aggr(sc, txq, tid);
/*
* add tid to round-robin queue if more frames
* are pending for the tid
*/
if (!skb_queue_empty(&tid->buf_q))
ath_tx_queue_tid(txq, tid);
if (tid == last_tid ||
txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH)
break;
}
if (!list_empty(&ac->tid_q)) {
if (!ac->sched) {
ac->sched = true;
list_add_tail(&ac->list, &txq->axq_acq);
}
}
if (ac == last_ac ||
txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH)
return;
}
}
/***********/
/* TX, DMA */
/***********/
/*
* Insert a chain of ath_buf (descriptors) on a txq and
* assume the descriptors are already chained together by caller.
*/
static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
struct list_head *head, bool internal)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_buf *bf, *bf_last;
bool puttxbuf = false;
bool edma;
/*
* Insert the frame on the outbound list and
* pass it on to the hardware.
*/
if (list_empty(head))
return;
edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
bf = list_first_entry(head, struct ath_buf, list);
bf_last = list_entry(head->prev, struct ath_buf, list);
ath_dbg(common, ATH_DBG_QUEUE,
"qnum: %d, txq depth: %d\n", txq->axq_qnum, txq->axq_depth);
if (edma && list_empty(&txq->txq_fifo[txq->txq_headidx])) {
list_splice_tail_init(head, &txq->txq_fifo[txq->txq_headidx]);
INCR(txq->txq_headidx, ATH_TXFIFO_DEPTH);
puttxbuf = true;
} else {
list_splice_tail_init(head, &txq->axq_q);
if (txq->axq_link) {
ath9k_hw_set_desc_link(ah, txq->axq_link, bf->bf_daddr);
ath_dbg(common, ATH_DBG_XMIT,
"link[%u] (%p)=%llx (%p)\n",
txq->axq_qnum, txq->axq_link,
ito64(bf->bf_daddr), bf->bf_desc);
} else if (!edma)
puttxbuf = true;
txq->axq_link = bf_last->bf_desc;
}
if (puttxbuf) {
TX_STAT_INC(txq->axq_qnum, puttxbuf);
ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr);
ath_dbg(common, ATH_DBG_XMIT, "TXDP[%u] = %llx (%p)\n",
txq->axq_qnum, ito64(bf->bf_daddr), bf->bf_desc);
}
if (!edma) {
TX_STAT_INC(txq->axq_qnum, txstart);
ath9k_hw_txstart(ah, txq->axq_qnum);
}
if (!internal) {
txq->axq_depth++;
if (bf_is_ampdu_not_probing(bf))
txq->axq_ampdu_depth++;
}
}
static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
struct sk_buff *skb, struct ath_tx_control *txctl)
{
struct ath_frame_info *fi = get_frame_info(skb);
struct list_head bf_head;
struct ath_buf *bf;
/*
* Do not queue to h/w when any of the following conditions is true:
* - there are pending frames in software queue
* - the TID is currently paused for ADDBA/BAR request
* - seqno is not within block-ack window
* - h/w queue depth exceeds low water mark
*/
if (!skb_queue_empty(&tid->buf_q) || tid->paused ||
!BAW_WITHIN(tid->seq_start, tid->baw_size, tid->seq_next) ||
txctl->txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH) {
/*
* Add this frame to software queue for scheduling later
* for aggregation.
*/
TX_STAT_INC(txctl->txq->axq_qnum, a_queued_sw);
__skb_queue_tail(&tid->buf_q, skb);
if (!txctl->an || !txctl->an->sleeping)
ath_tx_queue_tid(txctl->txq, tid);
return;
}
bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
if (!bf)
return;
bf->bf_state.bf_type = BUF_AMPDU;
INIT_LIST_HEAD(&bf_head);
list_add(&bf->list, &bf_head);
/* Add sub-frame to BAW */
ath_tx_addto_baw(sc, tid, bf->bf_state.seqno);
/* Queue to h/w without aggregation */
TX_STAT_INC(txctl->txq->axq_qnum, a_queued_hw);
bf->bf_lastbf = bf;
ath_tx_fill_desc(sc, bf, txctl->txq, fi->framelen);
ath_tx_txqaddbuf(sc, txctl->txq, &bf_head, false);
}
static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
struct ath_atx_tid *tid, struct sk_buff *skb)
{
struct ath_frame_info *fi = get_frame_info(skb);
struct list_head bf_head;
struct ath_buf *bf;
bf = fi->bf;
if (!bf)
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf)
return;
INIT_LIST_HEAD(&bf_head);
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
/* update starting sequence number for subsequent ADDBA request */
if (tid)
INCR(tid->seq_start, IEEE80211_SEQ_MAX);
bf->bf_lastbf = bf;
ath_tx_fill_desc(sc, bf, txq, fi->framelen);
ath_tx_txqaddbuf(sc, txq, &bf_head, false);
TX_STAT_INC(txq->axq_qnum, queued);
}
static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb,
int framelen)
{
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_sta *sta = tx_info->control.sta;
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath_frame_info *fi = get_frame_info(skb);
struct ath_node *an = NULL;
enum ath9k_key_type keytype;
keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
if (sta)
an = (struct ath_node *) sta->drv_priv;
memset(fi, 0, sizeof(*fi));
if (hw_key)
fi->keyix = hw_key->hw_key_idx;
else if (an && ieee80211_is_data(hdr->frame_control) && an->ps_key > 0)
fi->keyix = an->ps_key;
else
fi->keyix = ATH9K_TXKEYIX_INVALID;
fi->keytype = keytype;
fi->framelen = framelen;
}
u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_channel *curchan = ah->curchan;
if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) &&
(curchan->channelFlags & CHANNEL_5GHZ) &&
(chainmask == 0x7) && (rate < 0x90))
return 0x3;
else
return chainmask;
}
/*
* Assign a descriptor (and sequence number if necessary,
* and map buffer for DMA. Frees skb on error
*/
static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
struct ath_txq *txq,
struct ath_atx_tid *tid,
struct sk_buff *skb)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_frame_info *fi = get_frame_info(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath_buf *bf;
u16 seqno;
bf = ath_tx_get_buffer(sc);
if (!bf) {
ath_dbg(common, ATH_DBG_XMIT, "TX buffers are full\n");
goto error;
}
ATH_TXBUF_RESET(bf);
if (tid) {
seqno = tid->seq_next;
hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT);
INCR(tid->seq_next, IEEE80211_SEQ_MAX);
bf->bf_state.seqno = seqno;
}
bf->bf_mpdu = skb;
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
skb->len, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
bf->bf_mpdu = NULL;
bf->bf_buf_addr = 0;
ath_err(ath9k_hw_common(sc->sc_ah),
"dma_mapping_error() on TX\n");
ath_tx_return_buffer(sc, bf);
goto error;
}
fi->bf = bf;
return bf;
error:
dev_kfree_skb_any(skb);
return NULL;
}
/* FIXME: tx power */
static void ath_tx_start_dma(struct ath_softc *sc, struct sk_buff *skb,
struct ath_tx_control *txctl)
{
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath_atx_tid *tid = NULL;
struct ath_buf *bf;
u8 tidno;
spin_lock_bh(&txctl->txq->axq_lock);
ath9k: Fix kernel panic in AR2427 Kernel panic occurs just after AR2427 establishes connection with AP. Unless aggregation is enabled we don't initialize the TID structure. Thus accesing the elements of the TID structure when aggregation is disabled, leads to NULL pointer dereferencing. [ 191.320358] Call Trace: [ 191.320364] [<fd250ea7>] ? ath9k_tx+0xa7/0x200 [ath9k] [ 191.320376] [<fd1ec7fc>] ? __ieee80211_tx+0x5c/0x1e0 [mac80211] [ 191.320386] [<fd1edd2b>] ? ieee80211_tx+0x7b/0x90 [mac80211] [ 191.320395] [<fd1edddd>] ? ieee80211_xmit+0x9d/0x1d0 [mac80211] [ 191.320401] [<c014218f>] ? wake_up_state+0xf/0x20 [ 191.320405] [<c015dbc8>] ? signal_wake_up+0x28/0x40 [ 191.320410] [<c012a578>] ? default_spin_lock_flags+0x8/0x10 [ 191.320420] [<fd1ee308>] ? ieee80211_subif_start_xmit+0x2e8/0x7c0 [mac80211] [ 191.320425] [<c058f905>] ? do_page_fault+0x295/0x3a0 [ 191.320431] [<c04c4a3d>] ? dev_hard_start_xmit+0x1ad/0x210 [ 191.320436] [<c04d96b5>] ? sch_direct_xmit+0x105/0x170 [ 191.320445] [<fd1f161a>] ? get_sta_flags+0x2a/0x40 [mac80211] [ 191.320449] [<c04c780f>] ? dev_queue_xmit+0x37f/0x4b0 [ 191.320452] [<c04d75b0>] ? eth_header+0x0/0xb0 [ 191.320456] [<c04cc479>] ? neigh_resolve_output+0xe9/0x310 [ 191.320461] [<c053d295>] ? ip6_output_finish+0xa5/0x110 [ 191.320464] [<c053e354>] ? ip6_output2+0x134/0x250 [ 191.320468] [<c053f7dd>] ? ip6_output+0x6d/0x100 [ 191.320471] [<c0559665>] ? mld_sendpack+0x395/0x3e0 [ 191.320475] [<c0557f81>] ? add_grhead+0x31/0xa0 [ 191.320478] [<c055a83c>] ? mld_send_cr+0x1bc/0x2b0 [ 191.320482] [<c01535d9>] ? irq_exit+0x39/0x70 [ 191.320485] [<c055a940>] ? mld_ifc_timer_expire+0x10/0x40 [ 191.320489] [<c015b92e>] ? run_timer_softirq+0x13e/0x2c0 [ 191.320493] [<c0103a30>] ? common_interrupt+0x30/0x40 [ 191.320498] [<c055a930>] ? mld_ifc_timer_expire+0x0/0x40 [ 191.320502] [<c0153358>] ? __do_softirq+0x98/0x1b0 [ 191.320506] [<c01534b5>] ? do_softirq+0x45/0x50 [ 191.320509] [<c0153605>] ? irq_exit+0x65/0x70 [ 191.320513] [<c05917dc>] ? smp_apic_timer_interrupt+0x5c/0x8b [ 191.320516] [<c0103df1>] ? apic_timer_interrupt+0x31/0x40 [ 191.320521] [<c016007b>] ? k_getrusage+0x12b/0x2f0 [ 191.320525] [<c039e384>] ? acpi_idle_enter_simple+0x117/0x148 [ 191.320529] [<c04a20da>] ? cpuidle_idle_call+0x7a/0x100 [ 191.320532] [<c01021d4>] ? cpu_idle+0x94/0xd0 [ 191.320536] [<c057ab88>] ? rest_init+0x58/0x60 [ 191.320541] [<c07a58ec>] ? start_kernel+0x351/0x357 [ 191.320544] [<c07a53c7>] ? unknown_bootoption+0x0/0x19e [ 191.320548] [<c07a50aa>] ? i386_start_kernel+0xaa/0xb1 [ 191.320550] Code: 03 66 3d 00 03 0f 84 7c 02 00 00 83 c3 18 0f b6 03 8b 4d e0 89 c3 83 e3 0f 6b c3 48 89 5d d8 8d 04 06 8d 50 0c 89 55 d0 8b 40 20 <8b> 00 3b 01 0f 85 8e 02 00 00 f6 47 20 40 0f 84 29 ff ff ff 8b [ 191.320634] EIP: [<fd2586d4>] ath_tx_start+0x474/0x770 [ath9k] SS:ESP 0068:c0761a90 [ 191.320642] CR2: 0000000000000000 [ 191.320647] ---[ end trace 9296ef23b9076ece ]--- [ 191.320650] Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21 20:57:21 +08:00
if ((sc->sc_flags & SC_OP_TXAGGR) && txctl->an &&
ieee80211_is_data_qos(hdr->frame_control)) {
tidno = ieee80211_get_qos_ctl(hdr)[0] &
IEEE80211_QOS_CTL_TID_MASK;
tid = ATH_AN_2_TID(txctl->an, tidno);
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
WARN_ON(tid->ac->txq != txctl->txq);
}
if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && tid) {
/*
* Try aggregation if it's a unicast data frame
* and the destination is HT capable.
*/
ath_tx_send_ampdu(sc, tid, skb, txctl);
} else {
bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
if (!bf)
goto out;
bf->bf_state.bfs_paprd = txctl->paprd;
ath9k: Fix possible double free of PAPRD skb's This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [<c05c6468>] ? printk+0x2d/0x35 [ 194.193732] [<c05c63c3>] panic+0x5a/0xd2 [ 194.193741] [<c05ca3ed>] oops_end+0xcd/0xd0 [ 194.193750] [<c0105f74>] die+0x54/0x80 [ 194.193758] [<c05c9a16>] do_trap+0x96/0xc0 [ 194.193837] [<c0103fb0>] ? do_invalid_op+0x0/0xa0 [ 194.193846] [<c010403b>] do_invalid_op+0x8b/0xa0 [ 194.193856] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193866] [<c012ce18>] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [<c01de47a>] ? free_one_page+0x12a/0x2d0 [ 194.193888] [<c01e04dc>] ? __free_pages+0x1c/0x40 [ 194.193897] [<c05c97a7>] error_code+0x73/0x78 [ 194.193906] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193915] [<c04ecdd0>] ? skb_release_data+0x70/0xa0 [ 194.193924] [<c04ecdd0>] skb_release_data+0x70/0xa0 [ 194.193933] [<c04ec997>] __kfree_skb+0x17/0x90 [ 194.193941] [<c04eca31>] consume_skb+0x21/0x40 [ 194.193964] [<f85e0b70>] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [<f85caddf>] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [<c04ec40e>] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [<f85cc803>] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [<c0108a28>] ? sched_clock+0x8/0x10 [ 194.194030] [<c016bf14>] ? sched_clock_local+0xa4/0x180 [ 194.194040] [<c0139f57>] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [<c013a194>] ? enqueue_entity+0x174/0x200 [ 194.194064] [<f85ce83d>] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [<f85c7b9f>] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [<c01505d7>] tasklet_action+0xa7/0xb0 [ 194.194107] [<c015127c>] __do_softirq+0x9c/0x1b0 [ 194.194117] [<c01a7f64>] ? irq_to_desc+0x14/0x20 [ 194.194126] [<c0124fc4>] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [<c01513d5>] do_softirq+0x45/0x50 [ 194.194145] [<c0151545>] irq_exit+0x65/0x70 [ 194.194153] [<c05cf665>] do_IRQ+0x55/0xc0 [ 194.194162] [<c016a6c7>] ? hrtimer_start+0x27/0x30 [ 194.194171] [<c0103630>] common_interrupt+0x30/0x38 [ 194.194181] [<c012c21a>] ? native_safe_halt+0xa/0x10 [ 194.194268] [<c010a2f9>] default_idle+0x49/0xb0 [ 194.194277] [<c0101fcc>] cpu_idle+0x8c/0xd0 [ 194.194286] [<c05b2431>] rest_init+0x71/0x80 [ 194.194295] [<c081981a>] start_kernel+0x36e/0x374 [ 194.194305] [<c08199dd>] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [<c08190d7>] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04 21:08:23 +08:00
if (txctl->paprd)
bf->bf_state.bfs_paprd_timestamp = jiffies;
ath_tx_send_normal(sc, txctl->txq, tid, skb);
}
out:
spin_unlock_bh(&txctl->txq->axq_lock);
}
/* Upon failure caller should free skb */
int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ath_tx_control *txctl)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_sta *sta = info->control.sta;
struct ieee80211_vif *vif = info->control.vif;
struct ath_softc *sc = hw->priv;
struct ath_txq *txq = txctl->txq;
int padpos, padsize;
int frmlen = skb->len + FCS_LEN;
int q;
/* NOTE: sta can be NULL according to net/mac80211.h */
if (sta)
txctl->an = (struct ath_node *)sta->drv_priv;
if (info->control.hw_key)
frmlen += info->control.hw_key->icv_len;
/*
* As a temporary workaround, assign seq# here; this will likely need
* to be cleaned up to work better with Beacon transmission and virtual
* BSSes.
*/
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
sc->tx.seq_no += 0x10;
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
}
/* Add the padding after the header if this is not already done */
padpos = ath9k_cmn_padpos(hdr->frame_control);
padsize = padpos & 3;
if (padsize && skb->len > padpos) {
if (skb_headroom(skb) < padsize)
return -ENOMEM;
skb_push(skb, padsize);
memmove(skb->data, skb->data + padsize, padpos);
}
if ((vif && vif->type != NL80211_IFTYPE_AP &&
vif->type != NL80211_IFTYPE_AP_VLAN) ||
!ieee80211_is_data(hdr->frame_control))
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
setup_frame_info(hw, skb, frmlen);
/*
* At this point, the vif, hw_key and sta pointers in the tx control
* info are no longer valid (overwritten by the ath_frame_info data.
*/
q = skb_get_queue_mapping(skb);
spin_lock_bh(&txq->axq_lock);
if (txq == sc->tx.txq_map[q] &&
++txq->pending_frames > ATH_MAX_QDEPTH && !txq->stopped) {
ieee80211_stop_queue(sc->hw, q);
txq->stopped = 1;
}
spin_unlock_bh(&txq->axq_lock);
ath_tx_start_dma(sc, skb, txctl);
return 0;
}
/*****************/
/* TX Completion */
/*****************/
static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
int tx_flags, struct ath_txq *txq)
{
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
int q, padpos, padsize;
ath_dbg(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
if (tx_flags & ATH_TX_BAR)
tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
if (!(tx_flags & ATH_TX_ERROR))
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
padpos = ath9k_cmn_padpos(hdr->frame_control);
padsize = padpos & 3;
if (padsize && skb->len>padpos+padsize) {
/*
* Remove MAC header padding before giving the frame back to
* mac80211.
*/
memmove(skb->data + padsize, skb->data, padpos);
skb_pull(skb, padsize);
}
if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) {
sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
ath_dbg(common, ATH_DBG_PS,
"Going back to sleep after having received TX status (0x%lx)\n",
sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK));
}
q = skb_get_queue_mapping(skb);
if (txq == sc->tx.txq_map[q]) {
spin_lock_bh(&txq->axq_lock);
if (WARN_ON(--txq->pending_frames < 0))
txq->pending_frames = 0;
if (txq->stopped && txq->pending_frames < ATH_MAX_QDEPTH) {
ieee80211_wake_queue(sc->hw, q);
txq->stopped = 0;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
}
spin_unlock_bh(&txq->axq_lock);
}
ieee80211_tx_status(hw, skb);
}
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
struct ath_txq *txq, struct list_head *bf_q,
struct ath_tx_status *ts, int txok, int sendbar)
{
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
unsigned long flags;
int tx_flags = 0;
if (sendbar)
tx_flags = ATH_TX_BAR;
if (!txok)
tx_flags |= ATH_TX_ERROR;
if (ts->ts_status & ATH9K_TXERR_FILT)
tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
dma_unmap_single(sc->dev, bf->bf_buf_addr, skb->len, DMA_TO_DEVICE);
bf->bf_buf_addr = 0;
if (bf->bf_state.bfs_paprd) {
ath9k: Fix possible double free of PAPRD skb's This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [<c05c6468>] ? printk+0x2d/0x35 [ 194.193732] [<c05c63c3>] panic+0x5a/0xd2 [ 194.193741] [<c05ca3ed>] oops_end+0xcd/0xd0 [ 194.193750] [<c0105f74>] die+0x54/0x80 [ 194.193758] [<c05c9a16>] do_trap+0x96/0xc0 [ 194.193837] [<c0103fb0>] ? do_invalid_op+0x0/0xa0 [ 194.193846] [<c010403b>] do_invalid_op+0x8b/0xa0 [ 194.193856] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193866] [<c012ce18>] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [<c01de47a>] ? free_one_page+0x12a/0x2d0 [ 194.193888] [<c01e04dc>] ? __free_pages+0x1c/0x40 [ 194.193897] [<c05c97a7>] error_code+0x73/0x78 [ 194.193906] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193915] [<c04ecdd0>] ? skb_release_data+0x70/0xa0 [ 194.193924] [<c04ecdd0>] skb_release_data+0x70/0xa0 [ 194.193933] [<c04ec997>] __kfree_skb+0x17/0x90 [ 194.193941] [<c04eca31>] consume_skb+0x21/0x40 [ 194.193964] [<f85e0b70>] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [<f85caddf>] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [<c04ec40e>] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [<f85cc803>] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [<c0108a28>] ? sched_clock+0x8/0x10 [ 194.194030] [<c016bf14>] ? sched_clock_local+0xa4/0x180 [ 194.194040] [<c0139f57>] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [<c013a194>] ? enqueue_entity+0x174/0x200 [ 194.194064] [<f85ce83d>] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [<f85c7b9f>] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [<c01505d7>] tasklet_action+0xa7/0xb0 [ 194.194107] [<c015127c>] __do_softirq+0x9c/0x1b0 [ 194.194117] [<c01a7f64>] ? irq_to_desc+0x14/0x20 [ 194.194126] [<c0124fc4>] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [<c01513d5>] do_softirq+0x45/0x50 [ 194.194145] [<c0151545>] irq_exit+0x65/0x70 [ 194.194153] [<c05cf665>] do_IRQ+0x55/0xc0 [ 194.194162] [<c016a6c7>] ? hrtimer_start+0x27/0x30 [ 194.194171] [<c0103630>] common_interrupt+0x30/0x38 [ 194.194181] [<c012c21a>] ? native_safe_halt+0xa/0x10 [ 194.194268] [<c010a2f9>] default_idle+0x49/0xb0 [ 194.194277] [<c0101fcc>] cpu_idle+0x8c/0xd0 [ 194.194286] [<c05b2431>] rest_init+0x71/0x80 [ 194.194295] [<c081981a>] start_kernel+0x36e/0x374 [ 194.194305] [<c08199dd>] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [<c08190d7>] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04 21:08:23 +08:00
if (time_after(jiffies,
bf->bf_state.bfs_paprd_timestamp +
msecs_to_jiffies(ATH_PAPRD_TIMEOUT)))
dev_kfree_skb_any(skb);
else
complete(&sc->paprd_complete);
} else {
ath_debug_stat_tx(sc, bf, ts, txq, tx_flags);
ath_tx_complete(sc, skb, tx_flags, txq);
}
/* At this point, skb (bf->bf_mpdu) is consumed...make sure we don't
* accidentally reference it later.
*/
bf->bf_mpdu = NULL;
/*
* Return the list of ath_buf of this mpdu to free queue
*/
spin_lock_irqsave(&sc->tx.txbuflock, flags);
list_splice_tail_init(bf_q, &sc->tx.txbuf);
spin_unlock_irqrestore(&sc->tx.txbuflock, flags);
}
static void ath_tx_rc_status(struct ath_softc *sc, struct ath_buf *bf,
struct ath_tx_status *ts, int nframes, int nbad,
int txok)
{
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hw *hw = sc->hw;
struct ath_hw *ah = sc->sc_ah;
u8 i, tx_rateindex;
if (txok)
tx_info->status.ack_signal = ts->ts_rssi;
tx_rateindex = ts->ts_rateindex;
WARN_ON(tx_rateindex >= hw->max_rates);
if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
BUG_ON(nbad > nframes);
tx_info->status.ampdu_len = nframes;
tx_info->status.ampdu_ack_len = nframes - nbad;
}
if ((ts->ts_status & ATH9K_TXERR_FILT) == 0 &&
(tx_info->flags & IEEE80211_TX_CTL_NO_ACK) == 0) {
/*
* If an underrun error is seen assume it as an excessive
* retry only if max frame trigger level has been reached
* (2 KB for single stream, and 4 KB for dual stream).
* Adjust the long retry as if the frame was tried
* hw->max_rate_tries times to affect how rate control updates
* PER for the failed rate.
* In case of congestion on the bus penalizing this type of
* underruns should help hardware actually transmit new frames
* successfully by eventually preferring slower rates.
* This itself should also alleviate congestion on the bus.
*/
if (unlikely(ts->ts_flags & (ATH9K_TX_DATA_UNDERRUN |
ATH9K_TX_DELIM_UNDERRUN)) &&
ieee80211_is_data(hdr->frame_control) &&
ah->tx_trig_level >= sc->sc_ah->config.max_txtrig_level)
tx_info->status.rates[tx_rateindex].count =
hw->max_rate_tries;
}
for (i = tx_rateindex + 1; i < hw->max_rates; i++) {
tx_info->status.rates[i].count = 0;
tx_info->status.rates[i].idx = -1;
}
tx_info->status.rates[tx_rateindex].count = ts->ts_longretry + 1;
}
static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
struct ath_tx_status *ts, struct ath_buf *bf,
struct list_head *bf_head)
__releases(txq->axq_lock)
__acquires(txq->axq_lock)
{
int txok;
txq->axq_depth--;
txok = !(ts->ts_status & ATH9K_TXERR_MASK);
txq->axq_tx_inprogress = false;
if (bf_is_ampdu_not_probing(bf))
txq->axq_ampdu_depth--;
spin_unlock_bh(&txq->axq_lock);
if (!bf_isampdu(bf)) {
ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok, 0);
} else
ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok, true);
spin_lock_bh(&txq->axq_lock);
if (sc->sc_flags & SC_OP_TXAGGR)
ath_txq_schedule(sc, txq);
}
static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_buf *bf, *lastbf, *bf_held = NULL;
struct list_head bf_head;
struct ath_desc *ds;
struct ath_tx_status ts;
int status;
ath_dbg(common, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
txq->axq_link);
spin_lock_bh(&txq->axq_lock);
for (;;) {
if (work_pending(&sc->hw_reset_work))
break;
if (list_empty(&txq->axq_q)) {
txq->axq_link = NULL;
if (sc->sc_flags & SC_OP_TXAGGR)
ath_txq_schedule(sc, txq);
break;
}
bf = list_first_entry(&txq->axq_q, struct ath_buf, list);
/*
* There is a race condition that a BH gets scheduled
* after sw writes TxE and before hw re-load the last
* descriptor to get the newly chained one.
* Software must keep the last DONE descriptor as a
* holding descriptor - software does so by marking
* it with the STALE flag.
*/
bf_held = NULL;
if (bf->bf_stale) {
bf_held = bf;
if (list_is_last(&bf_held->list, &txq->axq_q))
break;
bf = list_entry(bf_held->list.next, struct ath_buf,
list);
}
lastbf = bf->bf_lastbf;
ds = lastbf->bf_desc;
memset(&ts, 0, sizeof(ts));
status = ath9k_hw_txprocdesc(ah, ds, &ts);
if (status == -EINPROGRESS)
break;
TX_STAT_INC(txq->axq_qnum, txprocdesc);
/*
* Remove ath_buf's of the same transmit unit from txq,
* however leave the last descriptor back as the holding
* descriptor for hw.
*/
lastbf->bf_stale = true;
INIT_LIST_HEAD(&bf_head);
if (!list_is_singular(&lastbf->list))
list_cut_position(&bf_head,
&txq->axq_q, lastbf->list.prev);
if (bf_held) {
list_del(&bf_held->list);
ath_tx_return_buffer(sc, bf_held);
}
ath_tx_process_buffer(sc, txq, &ts, bf, &bf_head);
}
spin_unlock_bh(&txq->axq_lock);
}
static void ath_tx_complete_poll_work(struct work_struct *work)
{
struct ath_softc *sc = container_of(work, struct ath_softc,
tx_complete_work.work);
struct ath_txq *txq;
int i;
bool needreset = false;
#ifdef CONFIG_ATH9K_DEBUGFS
sc->tx_complete_poll_work_seen++;
#endif
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
if (ATH_TXQ_SETUP(sc, i)) {
txq = &sc->tx.txq[i];
spin_lock_bh(&txq->axq_lock);
if (txq->axq_depth) {
if (txq->axq_tx_inprogress) {
needreset = true;
spin_unlock_bh(&txq->axq_lock);
break;
} else {
txq->axq_tx_inprogress = true;
}
}
spin_unlock_bh(&txq->axq_lock);
}
if (needreset) {
ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET,
"tx hung, resetting the chip\n");
ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
}
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
msecs_to_jiffies(ATH_TX_COMPLETE_POLL_INT));
}
void ath_tx_tasklet(struct ath_softc *sc)
{
int i;
u32 qcumask = ((1 << ATH9K_NUM_TX_QUEUES) - 1);
ath9k_hw_gettxintrtxqs(sc->sc_ah, &qcumask);
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ATH_TXQ_SETUP(sc, i) && (qcumask & (1 << i)))
ath_tx_processq(sc, &sc->tx.txq[i]);
}
}
void ath_tx_edma_tasklet(struct ath_softc *sc)
{
struct ath_tx_status ts;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_hw *ah = sc->sc_ah;
struct ath_txq *txq;
struct ath_buf *bf, *lastbf;
struct list_head bf_head;
int status;
for (;;) {
if (work_pending(&sc->hw_reset_work))
break;
status = ath9k_hw_txprocdesc(ah, NULL, (void *)&ts);
if (status == -EINPROGRESS)
break;
if (status == -EIO) {
ath_dbg(common, ATH_DBG_XMIT,
"Error processing tx status\n");
break;
}
/* Skip beacon completions */
if (ts.qid == sc->beacon.beaconq)
continue;
txq = &sc->tx.txq[ts.qid];
spin_lock_bh(&txq->axq_lock);
if (list_empty(&txq->txq_fifo[txq->txq_tailidx])) {
spin_unlock_bh(&txq->axq_lock);
return;
}
bf = list_first_entry(&txq->txq_fifo[txq->txq_tailidx],
struct ath_buf, list);
lastbf = bf->bf_lastbf;
INIT_LIST_HEAD(&bf_head);
list_cut_position(&bf_head, &txq->txq_fifo[txq->txq_tailidx],
&lastbf->list);
if (list_empty(&txq->txq_fifo[txq->txq_tailidx])) {
INCR(txq->txq_tailidx, ATH_TXFIFO_DEPTH);
if (!list_empty(&txq->axq_q)) {
struct list_head bf_q;
INIT_LIST_HEAD(&bf_q);
txq->axq_link = NULL;
list_splice_tail_init(&txq->axq_q, &bf_q);
ath_tx_txqaddbuf(sc, txq, &bf_q, true);
}
}
ath_tx_process_buffer(sc, txq, &ts, bf, &bf_head);
spin_unlock_bh(&txq->axq_lock);
}
}
/*****************/
/* Init, Cleanup */
/*****************/
static int ath_txstatus_setup(struct ath_softc *sc, int size)
{
struct ath_descdma *dd = &sc->txsdma;
u8 txs_len = sc->sc_ah->caps.txs_len;
dd->dd_desc_len = size * txs_len;
dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
&dd->dd_desc_paddr, GFP_KERNEL);
if (!dd->dd_desc)
return -ENOMEM;
return 0;
}
static int ath_tx_edma_init(struct ath_softc *sc)
{
int err;
err = ath_txstatus_setup(sc, ATH_TXSTATUS_RING_SIZE);
if (!err)
ath9k_hw_setup_statusring(sc->sc_ah, sc->txsdma.dd_desc,
sc->txsdma.dd_desc_paddr,
ATH_TXSTATUS_RING_SIZE);
return err;
}
static void ath_tx_edma_cleanup(struct ath_softc *sc)
{
struct ath_descdma *dd = &sc->txsdma;
dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
dd->dd_desc_paddr);
}
int ath_tx_init(struct ath_softc *sc, int nbufs)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int error = 0;
spin_lock_init(&sc->tx.txbuflock);
error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
"tx", nbufs, 1, 1);
if (error != 0) {
ath_err(common,
"Failed to allocate tx descriptors: %d\n", error);
goto err;
}
error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
"beacon", ATH_BCBUF, 1, 1);
if (error != 0) {
ath_err(common,
"Failed to allocate beacon descriptors: %d\n", error);
goto err;
}
INIT_DELAYED_WORK(&sc->tx_complete_work, ath_tx_complete_poll_work);
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
error = ath_tx_edma_init(sc);
if (error)
goto err;
}
err:
if (error != 0)
ath_tx_cleanup(sc);
return error;
}
void ath_tx_cleanup(struct ath_softc *sc)
{
if (sc->beacon.bdma.dd_desc_len != 0)
ath_descdma_cleanup(sc, &sc->beacon.bdma, &sc->beacon.bbuf);
if (sc->tx.txdma.dd_desc_len != 0)
ath_descdma_cleanup(sc, &sc->tx.txdma, &sc->tx.txbuf);
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_tx_edma_cleanup(sc);
}
void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
{
struct ath_atx_tid *tid;
struct ath_atx_ac *ac;
int tidno, acno;
for (tidno = 0, tid = &an->tid[tidno];
tidno < WME_NUM_TID;
tidno++, tid++) {
tid->an = an;
tid->tidno = tidno;
tid->seq_start = tid->seq_next = 0;
tid->baw_size = WME_MAX_BA;
tid->baw_head = tid->baw_tail = 0;
tid->sched = false;
tid->paused = false;
tid->state &= ~AGGR_CLEANUP;
__skb_queue_head_init(&tid->buf_q);
acno = TID_TO_WME_AC(tidno);
tid->ac = &an->ac[acno];
tid->state &= ~AGGR_ADDBA_COMPLETE;
tid->state &= ~AGGR_ADDBA_PROGRESS;
}
for (acno = 0, ac = &an->ac[acno];
acno < WME_NUM_AC; acno++, ac++) {
ac->sched = false;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
ac->txq = sc->tx.txq_map[acno];
INIT_LIST_HEAD(&ac->tid_q);
}
}
void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
{
struct ath_atx_ac *ac;
struct ath_atx_tid *tid;
struct ath_txq *txq;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
int tidno;
for (tidno = 0, tid = &an->tid[tidno];
tidno < WME_NUM_TID; tidno++, tid++) {
ac = tid->ac;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
txq = ac->txq;
spin_lock_bh(&txq->axq_lock);
if (tid->sched) {
list_del(&tid->list);
tid->sched = false;
}
if (ac->sched) {
list_del(&ac->list);
tid->ac->sched = false;
}
ath_tid_drain(sc, txq, tid);
tid->state &= ~AGGR_ADDBA_COMPLETE;
tid->state &= ~AGGR_CLEANUP;
spin_unlock_bh(&txq->axq_lock);
}
}