UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/tile/gxio/Kconfig

34 lines
865 B
Plaintext
Raw Normal View History

arch/tile: introduce GXIO IORPC framework for tilegx The GXIO I/O RPC subsystem handles exporting I/O hardware resources to Linux and to applications running under Linux. For instance, memory which is made available for I/O DMA must be mapped by an I/O TLB; that means that such memory must be locked down by Linux, so that it is not swapped or otherwise reused, as long as those I/O TLB entries are active. Similarly, configuring direct hardware access introduces new validation requirements. If a user application registers memory, Linux must ensure that the supplied virtual addresses are valid, and turn them into client physical addresses. Similarly, when Linux then supplies those client physical addresses to the Tilera hypervisor, it must in turn validate those before turning them into the real physical addresses which are required by the hardware. To the extent that these sorts of activities were required on previous TILE architecture processors, they were implemented in a device-specific fashion. This meant that every I/O device had its own Tilera hypervisor driver, its own Linux driver, and in some cases its own user-level library support. There was a large amount of more-or-less functionally identical code in different places, particularly in the different Linux drivers. For TILE-Gx, this support has been generalized into a common framework, known as the I/O RPC framework or just IORPC. The two "gxio" directories (one for headers, one for sources) start with just a few files in each with this infrastructure commit, but after adding support for the on-board I/O shims for networking, PCI, USB, crypto, compression, I2CS, etc., there end up being about 20 files in each directory. More information on the IORPC framework is in the <hv/iorpc.h> header, included in this commit. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-05 04:39:58 +08:00
# Support direct access to TILE-Gx hardware from user space, via the
# gxio library, or from kernel space, via kernel IORPC support.
config TILE_GXIO
bool
depends on TILEGX
arch/tile: common DMA code for the GXIO IORPC subsystem The dma_queue support is used by both the mPipe (networking) and Trio (PCI) hardware shims on tilegx. This common code is selected when either of those drivers is built. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-05 04:58:27 +08:00
# Support direct access to the common I/O DMA facility within the
# TILE-Gx mPIPE and Trio hardware from kernel space.
config TILE_GXIO_DMA
bool
select TILE_GXIO
arch/tile: provide kernel support for the tilegx mPIPE shim The TILE-Gx chip includes a packet-processing network engine called mPIPE ("Multicore Programmable Intelligent Packet Engine"). This change adds support for using the mPIPE engine from within the kernel. The engine has more functionality than is exposed here, but to keep the kernel code and binary simpler, this is a subset of the full API designed to enable standard Linux networking only. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-07 04:38:03 +08:00
# Support direct access to the TILE-Gx mPIPE hardware from kernel space.
config TILE_GXIO_MPIPE
bool
select TILE_GXIO
select TILE_GXIO_DMA
arch/tile: provide kernel support for the tilegx TRIO shim Provide kernel support for the tilegx "Transaction I/O" (TRIO) on-chip hardware. This hardware implements the PCIe interface for tilegx; the driver changes to use TRIO for PCIe are in a subsequent commit. The change is layered on top of the tilegx GXIO IORPC subsystem. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-08 04:53:03 +08:00
# Support direct access to the TILE-Gx TRIO hardware from kernel space.
config TILE_GXIO_TRIO
bool
select TILE_GXIO
select TILE_GXIO_DMA
arch/tile: provide kernel support for the tilegx USB shim This change adds support for accessing the USB shim from within the kernel. Note that this change by itself does not allow the kernel to act as a host or as a device; it merely exposes the built-in on-chip hardware to the kernel. The <arch/usb_host.h> and <arch/usb_host_def.h> headers are empty at the moment because the kernel does not require any types or definitions specific to the tilegx USB shim; the generic USB core code is all we need. The headers are left in as stubs so that we don't need to modify the hypervisor header (drv_usb_host_intf.h) from upstream. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-10 00:25:02 +08:00
# Support direct access to the TILE-Gx USB hardware from kernel space.
config TILE_GXIO_USB_HOST
bool
select TILE_GXIO
tilegx: provide kernel support for the tilegx UART shim The TILE-Gx chip includes an on-chip UART. This change adds support for using the UART from within the kernel. The UART shim has more functionality than is exposed here, but to keep the kernel code and binary simpler, this is a subset of the full API designed to enable a standard Linux tty serial driver only. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 02:09:28 +08:00
# Support direct access to the TILE-Gx UART hardware from kernel space.
config TILE_GXIO_UART
bool
select TILE_GXIO