OpenCloudOS-Kernel/drivers/net/wireless/ath/ath5k/debug.c

1036 lines
31 KiB
C
Raw Normal View History

/*
* Copyright (c) 2007-2008 Bruno Randolf <bruno@thinktube.com>
*
* This file is free software: you may copy, redistribute and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 2 of the License, or (at your
* option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*
* This file incorporates work covered by the following copyright and
* permission notice:
*
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
* Copyright (c) 2004-2005 Atheros Communications, Inc.
* Copyright (c) 2006 Devicescape Software, Inc.
* Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
* Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
#include "base.h"
#include "debug.h"
static unsigned int ath5k_debug;
module_param_named(debug, ath5k_debug, uint, 0);
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
#ifdef CONFIG_ATH5K_DEBUG
#include <linux/seq_file.h>
#include "reg.h"
#include "ani.h"
static int ath5k_debugfs_open(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return 0;
}
/* debugfs: registers */
struct reg {
const char *name;
int addr;
};
#define REG_STRUCT_INIT(r) { #r, r }
/* just a few random registers, might want to add more */
static const struct reg regs[] = {
REG_STRUCT_INIT(AR5K_CR),
REG_STRUCT_INIT(AR5K_RXDP),
REG_STRUCT_INIT(AR5K_CFG),
REG_STRUCT_INIT(AR5K_IER),
REG_STRUCT_INIT(AR5K_BCR),
REG_STRUCT_INIT(AR5K_RTSD0),
REG_STRUCT_INIT(AR5K_RTSD1),
REG_STRUCT_INIT(AR5K_TXCFG),
REG_STRUCT_INIT(AR5K_RXCFG),
REG_STRUCT_INIT(AR5K_RXJLA),
REG_STRUCT_INIT(AR5K_MIBC),
REG_STRUCT_INIT(AR5K_TOPS),
REG_STRUCT_INIT(AR5K_RXNOFRM),
REG_STRUCT_INIT(AR5K_TXNOFRM),
REG_STRUCT_INIT(AR5K_RPGTO),
REG_STRUCT_INIT(AR5K_RFCNT),
REG_STRUCT_INIT(AR5K_MISC),
REG_STRUCT_INIT(AR5K_QCUDCU_CLKGT),
REG_STRUCT_INIT(AR5K_ISR),
REG_STRUCT_INIT(AR5K_PISR),
REG_STRUCT_INIT(AR5K_SISR0),
REG_STRUCT_INIT(AR5K_SISR1),
REG_STRUCT_INIT(AR5K_SISR2),
REG_STRUCT_INIT(AR5K_SISR3),
REG_STRUCT_INIT(AR5K_SISR4),
REG_STRUCT_INIT(AR5K_IMR),
REG_STRUCT_INIT(AR5K_PIMR),
REG_STRUCT_INIT(AR5K_SIMR0),
REG_STRUCT_INIT(AR5K_SIMR1),
REG_STRUCT_INIT(AR5K_SIMR2),
REG_STRUCT_INIT(AR5K_SIMR3),
REG_STRUCT_INIT(AR5K_SIMR4),
REG_STRUCT_INIT(AR5K_DCM_ADDR),
REG_STRUCT_INIT(AR5K_DCCFG),
REG_STRUCT_INIT(AR5K_CCFG),
REG_STRUCT_INIT(AR5K_CPC0),
REG_STRUCT_INIT(AR5K_CPC1),
REG_STRUCT_INIT(AR5K_CPC2),
REG_STRUCT_INIT(AR5K_CPC3),
REG_STRUCT_INIT(AR5K_CPCOVF),
REG_STRUCT_INIT(AR5K_RESET_CTL),
REG_STRUCT_INIT(AR5K_SLEEP_CTL),
REG_STRUCT_INIT(AR5K_INTPEND),
REG_STRUCT_INIT(AR5K_SFR),
REG_STRUCT_INIT(AR5K_PCICFG),
REG_STRUCT_INIT(AR5K_GPIOCR),
REG_STRUCT_INIT(AR5K_GPIODO),
REG_STRUCT_INIT(AR5K_SREV),
};
static void *reg_start(struct seq_file *seq, loff_t *pos)
{
return *pos < ARRAY_SIZE(regs) ? (void *)&regs[*pos] : NULL;
}
static void reg_stop(struct seq_file *seq, void *p)
{
/* nothing to do */
}
static void *reg_next(struct seq_file *seq, void *p, loff_t *pos)
{
++*pos;
return *pos < ARRAY_SIZE(regs) ? (void *)&regs[*pos] : NULL;
}
static int reg_show(struct seq_file *seq, void *p)
{
struct ath5k_hw *ah = seq->private;
struct reg *r = p;
seq_printf(seq, "%-25s0x%08x\n", r->name,
ath5k_hw_reg_read(ah, r->addr));
return 0;
}
static const struct seq_operations register_seq_ops = {
.start = reg_start,
.next = reg_next,
.stop = reg_stop,
.show = reg_show
};
static int open_file_registers(struct inode *inode, struct file *file)
{
struct seq_file *s;
int res;
res = seq_open(file, &register_seq_ops);
if (res == 0) {
s = file->private_data;
s->private = inode->i_private;
}
return res;
}
static const struct file_operations fops_registers = {
.open = open_file_registers,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
.owner = THIS_MODULE,
};
/* debugfs: beacons */
static ssize_t read_file_beacon(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[500];
unsigned int len = 0;
unsigned int v;
u64 tsf;
v = ath5k_hw_reg_read(ah, AR5K_BEACON);
len += snprintf(buf + len, sizeof(buf) - len,
"%-24s0x%08x\tintval: %d\tTIM: 0x%x\n",
"AR5K_BEACON", v, v & AR5K_BEACON_PERIOD,
(v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S);
len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n",
"AR5K_LAST_TSTP", ath5k_hw_reg_read(ah, AR5K_LAST_TSTP));
len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n\n",
"AR5K_BEACON_CNT", ath5k_hw_reg_read(ah, AR5K_BEACON_CNT));
v = ath5k_hw_reg_read(ah, AR5K_TIMER0);
len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER0 (TBTT)", v, v);
v = ath5k_hw_reg_read(ah, AR5K_TIMER1);
len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER1 (DMA)", v, v >> 3);
v = ath5k_hw_reg_read(ah, AR5K_TIMER2);
len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER2 (SWBA)", v, v >> 3);
v = ath5k_hw_reg_read(ah, AR5K_TIMER3);
len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER3 (ATIM)", v, v);
tsf = ath5k_hw_get_tsf64(ah);
len += snprintf(buf + len, sizeof(buf) - len,
wireless: correct warnings from using '%llx' for type 'u64' drivers/net/wireless/ath5k/debug.c: In function 'read_file_tsf': drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c: In function 'read_file_beacon': drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_tx_status_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:3907: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_rx_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:4039: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type '__le64' drivers/net/wireless/iwlwifi/iwl-4965.c:4046: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/iwlwifi/iwl4965-base.c: In function 'iwl4965_tx_status_reply_tx': drivers/net/wireless/iwlwifi/iwl4965-base.c:3661: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-08 05:38:43 +08:00
"TSF\t\t0x%016llx\tTU: %08x\n",
(unsigned long long)tsf, TSF_TO_TU(tsf));
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_beacon(struct file *file,
const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[20];
if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
return -EFAULT;
if (strncmp(buf, "disable", 7) == 0) {
AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
printk(KERN_INFO "debugfs disable beacons\n");
} else if (strncmp(buf, "enable", 6) == 0) {
AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
printk(KERN_INFO "debugfs enable beacons\n");
}
return count;
}
static const struct file_operations fops_beacon = {
.read = read_file_beacon,
.write = write_file_beacon,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
/* debugfs: reset */
static ssize_t write_file_reset(struct file *file,
const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "debug file triggered reset\n");
ieee80211_queue_work(ah->hw, &ah->reset_work);
return count;
}
static const struct file_operations fops_reset = {
.write = write_file_reset,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = noop_llseek,
};
/* debugfs: debug level */
static const struct {
enum ath5k_debug_level level;
const char *name;
const char *desc;
} dbg_info[] = {
{ ATH5K_DEBUG_RESET, "reset", "reset and initialization" },
{ ATH5K_DEBUG_INTR, "intr", "interrupt handling" },
{ ATH5K_DEBUG_MODE, "mode", "mode init/setup" },
{ ATH5K_DEBUG_XMIT, "xmit", "basic xmit operation" },
{ ATH5K_DEBUG_BEACON, "beacon", "beacon handling" },
{ ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" },
{ ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" },
{ ATH5K_DEBUG_LED, "led", "LED management" },
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
{ ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" },
{ ATH5K_DEBUG_DMA, "dma", "dma start/stop" },
{ ATH5K_DEBUG_ANI, "ani", "adaptive noise immunity" },
{ ATH5K_DEBUG_DESC, "desc", "descriptor chains" },
{ ATH5K_DEBUG_ANY, "all", "show all debug levels" },
};
static ssize_t read_file_debug(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[700];
unsigned int len = 0;
unsigned int i;
len += snprintf(buf + len, sizeof(buf) - len,
"DEBUG LEVEL: 0x%08x\n\n", ah->debug.level);
for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) {
len += snprintf(buf + len, sizeof(buf) - len,
"%10s %c 0x%08x - %s\n", dbg_info[i].name,
ah->debug.level & dbg_info[i].level ? '+' : ' ',
dbg_info[i].level, dbg_info[i].desc);
}
len += snprintf(buf + len, sizeof(buf) - len,
"%10s %c 0x%08x - %s\n", dbg_info[i].name,
ah->debug.level == dbg_info[i].level ? '+' : ' ',
dbg_info[i].level, dbg_info[i].desc);
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_debug(struct file *file,
const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
unsigned int i;
char buf[20];
if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
return -EFAULT;
for (i = 0; i < ARRAY_SIZE(dbg_info); i++) {
if (strncmp(buf, dbg_info[i].name,
strlen(dbg_info[i].name)) == 0) {
ah->debug.level ^= dbg_info[i].level; /* toggle bit */
break;
}
}
return count;
}
static const struct file_operations fops_debug = {
.read = read_file_debug,
.write = write_file_debug,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
/* debugfs: antenna */
static ssize_t read_file_antenna(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[700];
unsigned int len = 0;
unsigned int i;
unsigned int v;
len += snprintf(buf + len, sizeof(buf) - len, "antenna mode\t%d\n",
ah->ah_ant_mode);
len += snprintf(buf + len, sizeof(buf) - len, "default antenna\t%d\n",
ah->ah_def_ant);
len += snprintf(buf + len, sizeof(buf) - len, "tx antenna\t%d\n",
ah->ah_tx_ant);
len += snprintf(buf + len, sizeof(buf) - len, "\nANTENNA\t\tRX\tTX\n");
for (i = 1; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) {
len += snprintf(buf + len, sizeof(buf) - len,
"[antenna %d]\t%d\t%d\n",
i, ah->stats.antenna_rx[i], ah->stats.antenna_tx[i]);
}
len += snprintf(buf + len, sizeof(buf) - len, "[invalid]\t%d\t%d\n",
ah->stats.antenna_rx[0], ah->stats.antenna_tx[0]);
v = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
len += snprintf(buf + len, sizeof(buf) - len,
"\nAR5K_DEFAULT_ANTENNA\t0x%08x\n", v);
v = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_DEFAULT_ANTENNA\t%d\n",
(v & AR5K_STA_ID1_DEFAULT_ANTENNA) != 0);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_DESC_ANTENNA\t%d\n",
(v & AR5K_STA_ID1_DESC_ANTENNA) != 0);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_RTS_DEF_ANTENNA\t%d\n",
(v & AR5K_STA_ID1_RTS_DEF_ANTENNA) != 0);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_SELFGEN_DEF_ANT\t%d\n",
(v & AR5K_STA_ID1_SELFGEN_DEF_ANT) != 0);
v = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL);
len += snprintf(buf + len, sizeof(buf) - len,
"\nAR5K_PHY_AGCCTL_OFDM_DIV_DIS\t%d\n",
(v & AR5K_PHY_AGCCTL_OFDM_DIV_DIS) != 0);
v = ath5k_hw_reg_read(ah, AR5K_PHY_RESTART);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHY_RESTART_DIV_GC\t\t%x\n",
(v & AR5K_PHY_RESTART_DIV_GC) >> AR5K_PHY_RESTART_DIV_GC_S);
v = ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ANT_DIV);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHY_FAST_ANT_DIV_EN\t%d\n",
(v & AR5K_PHY_FAST_ANT_DIV_EN) != 0);
v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_0);
len += snprintf(buf + len, sizeof(buf) - len,
"\nAR5K_PHY_ANT_SWITCH_TABLE_0\t0x%08x\n", v);
v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_1);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHY_ANT_SWITCH_TABLE_1\t0x%08x\n", v);
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_antenna(struct file *file,
const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
unsigned int i;
char buf[20];
if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
return -EFAULT;
if (strncmp(buf, "diversity", 9) == 0) {
ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT);
printk(KERN_INFO "ath5k debug: enable diversity\n");
} else if (strncmp(buf, "fixed-a", 7) == 0) {
ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A);
printk(KERN_INFO "ath5k debugfs: fixed antenna A\n");
} else if (strncmp(buf, "fixed-b", 7) == 0) {
ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B);
printk(KERN_INFO "ath5k debug: fixed antenna B\n");
} else if (strncmp(buf, "clear", 5) == 0) {
for (i = 0; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) {
ah->stats.antenna_rx[i] = 0;
ah->stats.antenna_tx[i] = 0;
}
printk(KERN_INFO "ath5k debug: cleared antenna stats\n");
}
return count;
}
static const struct file_operations fops_antenna = {
.read = read_file_antenna,
.write = write_file_antenna,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
/* debugfs: misc */
static ssize_t read_file_misc(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[700];
unsigned int len = 0;
u32 filt = ath5k_hw_get_rx_filter(ah);
len += snprintf(buf + len, sizeof(buf) - len, "bssid-mask: %pM\n",
ah->bssidmask);
len += snprintf(buf + len, sizeof(buf) - len, "filter-flags: 0x%x ",
filt);
if (filt & AR5K_RX_FILTER_UCAST)
len += snprintf(buf + len, sizeof(buf) - len, " UCAST");
if (filt & AR5K_RX_FILTER_MCAST)
len += snprintf(buf + len, sizeof(buf) - len, " MCAST");
if (filt & AR5K_RX_FILTER_BCAST)
len += snprintf(buf + len, sizeof(buf) - len, " BCAST");
if (filt & AR5K_RX_FILTER_CONTROL)
len += snprintf(buf + len, sizeof(buf) - len, " CONTROL");
if (filt & AR5K_RX_FILTER_BEACON)
len += snprintf(buf + len, sizeof(buf) - len, " BEACON");
if (filt & AR5K_RX_FILTER_PROM)
len += snprintf(buf + len, sizeof(buf) - len, " PROM");
if (filt & AR5K_RX_FILTER_XRPOLL)
len += snprintf(buf + len, sizeof(buf) - len, " XRPOLL");
if (filt & AR5K_RX_FILTER_PROBEREQ)
len += snprintf(buf + len, sizeof(buf) - len, " PROBEREQ");
if (filt & AR5K_RX_FILTER_PHYERR_5212)
len += snprintf(buf + len, sizeof(buf) - len, " PHYERR-5212");
if (filt & AR5K_RX_FILTER_RADARERR_5212)
len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5212");
if (filt & AR5K_RX_FILTER_PHYERR_5211)
snprintf(buf + len, sizeof(buf) - len, " PHYERR-5211");
if (filt & AR5K_RX_FILTER_RADARERR_5211)
len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5211");
len += snprintf(buf + len, sizeof(buf) - len, "\nopmode: %s (%d)\n",
ath_opmode_to_string(ah->opmode), ah->opmode);
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static const struct file_operations fops_misc = {
.read = read_file_misc,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
};
/* debugfs: frameerrors */
static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
struct ath5k_statistics *st = &ah->stats;
char buf[700];
unsigned int len = 0;
int i;
len += snprintf(buf + len, sizeof(buf) - len,
"RX\n---------------------\n");
len += snprintf(buf + len, sizeof(buf) - len, "CRC\t%u\t(%u%%)\n",
st->rxerr_crc,
st->rx_all_count > 0 ?
st->rxerr_crc * 100 / st->rx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "PHY\t%u\t(%u%%)\n",
st->rxerr_phy,
st->rx_all_count > 0 ?
st->rxerr_phy * 100 / st->rx_all_count : 0);
for (i = 0; i < 32; i++) {
if (st->rxerr_phy_code[i])
len += snprintf(buf + len, sizeof(buf) - len,
" phy_err[%u]\t%u\n",
i, st->rxerr_phy_code[i]);
}
len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n",
st->rxerr_fifo,
st->rx_all_count > 0 ?
st->rxerr_fifo * 100 / st->rx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "decrypt\t%u\t(%u%%)\n",
st->rxerr_decrypt,
st->rx_all_count > 0 ?
st->rxerr_decrypt * 100 / st->rx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "MIC\t%u\t(%u%%)\n",
st->rxerr_mic,
st->rx_all_count > 0 ?
st->rxerr_mic * 100 / st->rx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "process\t%u\t(%u%%)\n",
st->rxerr_proc,
st->rx_all_count > 0 ?
st->rxerr_proc * 100 / st->rx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "jumbo\t%u\t(%u%%)\n",
st->rxerr_jumbo,
st->rx_all_count > 0 ?
st->rxerr_jumbo * 100 / st->rx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "[RX all\t%u]\n",
st->rx_all_count);
len += snprintf(buf + len, sizeof(buf) - len, "RX-all-bytes\t%u\n",
st->rx_bytes_count);
len += snprintf(buf + len, sizeof(buf) - len,
"\nTX\n---------------------\n");
len += snprintf(buf + len, sizeof(buf) - len, "retry\t%u\t(%u%%)\n",
st->txerr_retry,
st->tx_all_count > 0 ?
st->txerr_retry * 100 / st->tx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n",
st->txerr_fifo,
st->tx_all_count > 0 ?
st->txerr_fifo * 100 / st->tx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "filter\t%u\t(%u%%)\n",
st->txerr_filt,
st->tx_all_count > 0 ?
st->txerr_filt * 100 / st->tx_all_count : 0);
len += snprintf(buf + len, sizeof(buf) - len, "[TX all\t%u]\n",
st->tx_all_count);
len += snprintf(buf + len, sizeof(buf) - len, "TX-all-bytes\t%u\n",
st->tx_bytes_count);
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_frameerrors(struct file *file,
const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
struct ath5k_statistics *st = &ah->stats;
char buf[20];
if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
return -EFAULT;
if (strncmp(buf, "clear", 5) == 0) {
st->rxerr_crc = 0;
st->rxerr_phy = 0;
st->rxerr_fifo = 0;
st->rxerr_decrypt = 0;
st->rxerr_mic = 0;
st->rxerr_proc = 0;
st->rxerr_jumbo = 0;
st->rx_all_count = 0;
st->txerr_retry = 0;
st->txerr_fifo = 0;
st->txerr_filt = 0;
st->tx_all_count = 0;
printk(KERN_INFO "ath5k debug: cleared frameerrors stats\n");
}
return count;
}
static const struct file_operations fops_frameerrors = {
.read = read_file_frameerrors,
.write = write_file_frameerrors,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
/* debugfs: ani */
static ssize_t read_file_ani(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
struct ath5k_statistics *st = &ah->stats;
struct ath5k_ani_state *as = &ah->ani_state;
char buf[700];
unsigned int len = 0;
len += snprintf(buf + len, sizeof(buf) - len,
"HW has PHY error counters:\t%s\n",
ah->ah_capabilities.cap_has_phyerr_counters ?
"yes" : "no");
len += snprintf(buf + len, sizeof(buf) - len,
"HW max spur immunity level:\t%d\n",
as->max_spur_level);
len += snprintf(buf + len, sizeof(buf) - len,
"\nANI state\n--------------------------------------------\n");
len += snprintf(buf + len, sizeof(buf) - len, "operating mode:\t\t\t");
switch (as->ani_mode) {
case ATH5K_ANI_MODE_OFF:
len += snprintf(buf + len, sizeof(buf) - len, "OFF\n");
break;
case ATH5K_ANI_MODE_MANUAL_LOW:
len += snprintf(buf + len, sizeof(buf) - len,
"MANUAL LOW\n");
break;
case ATH5K_ANI_MODE_MANUAL_HIGH:
len += snprintf(buf + len, sizeof(buf) - len,
"MANUAL HIGH\n");
break;
case ATH5K_ANI_MODE_AUTO:
len += snprintf(buf + len, sizeof(buf) - len, "AUTO\n");
break;
default:
len += snprintf(buf + len, sizeof(buf) - len,
"??? (not good)\n");
break;
}
len += snprintf(buf + len, sizeof(buf) - len,
"noise immunity level:\t\t%d\n",
as->noise_imm_level);
len += snprintf(buf + len, sizeof(buf) - len,
"spur immunity level:\t\t%d\n",
as->spur_level);
len += snprintf(buf + len, sizeof(buf) - len,
"firstep level:\t\t\t%d\n",
as->firstep_level);
len += snprintf(buf + len, sizeof(buf) - len,
"OFDM weak signal detection:\t%s\n",
as->ofdm_weak_sig ? "on" : "off");
len += snprintf(buf + len, sizeof(buf) - len,
"CCK weak signal detection:\t%s\n",
as->cck_weak_sig ? "on" : "off");
len += snprintf(buf + len, sizeof(buf) - len,
"\nMIB INTERRUPTS:\t\t%u\n",
st->mib_intr);
len += snprintf(buf + len, sizeof(buf) - len,
"beacon RSSI average:\t%d\n",
(int)ewma_read(&ah->ah_beacon_rssi_avg));
#define CC_PRINT(_struct, _field) \
_struct._field, \
_struct.cycles > 0 ? \
_struct._field * 100 / _struct.cycles : 0
len += snprintf(buf + len, sizeof(buf) - len,
"profcnt tx\t\t%u\t(%d%%)\n",
CC_PRINT(as->last_cc, tx_frame));
len += snprintf(buf + len, sizeof(buf) - len,
"profcnt rx\t\t%u\t(%d%%)\n",
CC_PRINT(as->last_cc, rx_frame));
len += snprintf(buf + len, sizeof(buf) - len,
"profcnt busy\t\t%u\t(%d%%)\n",
CC_PRINT(as->last_cc, rx_busy));
#undef CC_PRINT
len += snprintf(buf + len, sizeof(buf) - len, "profcnt cycles\t\t%u\n",
as->last_cc.cycles);
len += snprintf(buf + len, sizeof(buf) - len,
"listen time\t\t%d\tlast: %d\n",
as->listen_time, as->last_listen);
len += snprintf(buf + len, sizeof(buf) - len,
"OFDM errors\t\t%u\tlast: %u\tsum: %u\n",
as->ofdm_errors, as->last_ofdm_errors,
as->sum_ofdm_errors);
len += snprintf(buf + len, sizeof(buf) - len,
"CCK errors\t\t%u\tlast: %u\tsum: %u\n",
as->cck_errors, as->last_cck_errors,
as->sum_cck_errors);
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHYERR_CNT1\t%x\t(=%d)\n",
ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1),
ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)));
len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHYERR_CNT2\t%x\t(=%d)\n",
ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2),
ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)));
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_ani(struct file *file,
const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[20];
if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
return -EFAULT;
if (strncmp(buf, "sens-low", 8) == 0) {
ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_HIGH);
} else if (strncmp(buf, "sens-high", 9) == 0) {
ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_LOW);
} else if (strncmp(buf, "ani-off", 7) == 0) {
ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF);
} else if (strncmp(buf, "ani-on", 6) == 0) {
ath5k_ani_init(ah, ATH5K_ANI_MODE_AUTO);
} else if (strncmp(buf, "noise-low", 9) == 0) {
ath5k_ani_set_noise_immunity_level(ah, 0);
} else if (strncmp(buf, "noise-high", 10) == 0) {
ath5k_ani_set_noise_immunity_level(ah,
ATH5K_ANI_MAX_NOISE_IMM_LVL);
} else if (strncmp(buf, "spur-low", 8) == 0) {
ath5k_ani_set_spur_immunity_level(ah, 0);
} else if (strncmp(buf, "spur-high", 9) == 0) {
ath5k_ani_set_spur_immunity_level(ah,
ah->ani_state.max_spur_level);
} else if (strncmp(buf, "fir-low", 7) == 0) {
ath5k_ani_set_firstep_level(ah, 0);
} else if (strncmp(buf, "fir-high", 8) == 0) {
ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL);
} else if (strncmp(buf, "ofdm-off", 8) == 0) {
ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
} else if (strncmp(buf, "ofdm-on", 7) == 0) {
ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
} else if (strncmp(buf, "cck-off", 7) == 0) {
ath5k_ani_set_cck_weak_signal_detection(ah, false);
} else if (strncmp(buf, "cck-on", 6) == 0) {
ath5k_ani_set_cck_weak_signal_detection(ah, true);
}
return count;
}
static const struct file_operations fops_ani = {
.read = read_file_ani,
.write = write_file_ani,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
/* debugfs: queues etc */
static ssize_t read_file_queue(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[700];
unsigned int len = 0;
struct ath5k_txq *txq;
struct ath5k_buf *bf, *bf0;
int i, n;
len += snprintf(buf + len, sizeof(buf) - len,
"available txbuffers: %d\n", ah->txbuf_len);
for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) {
txq = &ah->txqs[i];
len += snprintf(buf + len, sizeof(buf) - len,
"%02d: %ssetup\n", i, txq->setup ? "" : "not ");
if (!txq->setup)
continue;
n = 0;
spin_lock_bh(&txq->lock);
list_for_each_entry_safe(bf, bf0, &txq->q, list)
n++;
spin_unlock_bh(&txq->lock);
len += snprintf(buf + len, sizeof(buf) - len,
" len: %d bufs: %d\n", txq->txq_len, n);
len += snprintf(buf + len, sizeof(buf) - len,
" stuck: %d\n", txq->txq_stuck);
}
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_queue(struct file *file,
const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ath5k_hw *ah = file->private_data;
char buf[20];
if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
return -EFAULT;
if (strncmp(buf, "start", 5) == 0)
ieee80211_wake_queues(ah->hw);
else if (strncmp(buf, "stop", 4) == 0)
ieee80211_stop_queues(ah->hw);
return count;
}
static const struct file_operations fops_queue = {
.read = read_file_queue,
.write = write_file_queue,
.open = ath5k_debugfs_open,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
void
ath5k_debug_init_device(struct ath5k_hw *ah)
{
struct dentry *phydir;
ah->debug.level = ath5k_debug;
phydir = debugfs_create_dir("ath5k", ah->hw->wiphy->debugfsdir);
if (!phydir)
return;
debugfs_create_file("debug", S_IWUSR | S_IRUSR, phydir, ah,
&fops_debug);
debugfs_create_file("registers", S_IRUSR, phydir, ah, &fops_registers);
debugfs_create_file("beacon", S_IWUSR | S_IRUSR, phydir, ah,
&fops_beacon);
debugfs_create_file("reset", S_IWUSR, phydir, ah, &fops_reset);
debugfs_create_file("antenna", S_IWUSR | S_IRUSR, phydir, ah,
&fops_antenna);
debugfs_create_file("misc", S_IRUSR, phydir, ah, &fops_misc);
debugfs_create_file("frameerrors", S_IWUSR | S_IRUSR, phydir, ah,
&fops_frameerrors);
debugfs_create_file("ani", S_IWUSR | S_IRUSR, phydir, ah, &fops_ani);
debugfs_create_file("queue", S_IWUSR | S_IRUSR, phydir, ah,
&fops_queue);
debugfs_create_bool("32khz_clock", S_IWUSR | S_IRUSR, phydir,
&ah->ah_use_32khz_clock);
}
/* functions used in other places */
void
ath5k_debug_dump_bands(struct ath5k_hw *ah)
{
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
unsigned int b, i;
if (likely(!(ah->debug.level & ATH5K_DEBUG_DUMPBANDS)))
return;
BUG_ON(!ah->sbands);
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
for (b = 0; b < IEEE80211_NUM_BANDS; b++) {
struct ieee80211_supported_band *band = &ah->sbands[b];
char bname[6];
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
switch (band->band) {
case IEEE80211_BAND_2GHZ:
strcpy(bname, "2 GHz");
break;
case IEEE80211_BAND_5GHZ:
strcpy(bname, "5 GHz");
break;
default:
printk(KERN_DEBUG "Band not supported: %d\n",
band->band);
return;
}
printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname,
band->n_channels, band->n_bitrates);
printk(KERN_DEBUG " channels:\n");
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
for (i = 0; i < band->n_channels; i++)
printk(KERN_DEBUG " %3d %d %.4x %.4x\n",
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
ieee80211_frequency_to_channel(
band->channels[i].center_freq),
band->channels[i].center_freq,
band->channels[i].hw_value,
band->channels[i].flags);
printk(KERN_DEBUG " rates:\n");
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
for (i = 0; i < band->n_bitrates; i++)
printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n",
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
band->bitrates[i].bitrate,
band->bitrates[i].hw_value,
band->bitrates[i].flags,
band->bitrates[i].hw_value_short);
}
}
static inline void
ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done,
struct ath5k_rx_status *rs)
{
struct ath5k_desc *ds = bf->desc;
struct ath5k_hw_all_rx_desc *rd = &ds->ud.ds_rx;
printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n",
ds, (unsigned long long)bf->daddr,
ds->ds_link, ds->ds_data,
rd->rx_ctl.rx_control_0, rd->rx_ctl.rx_control_1,
rd->rx_stat.rx_status_0, rd->rx_stat.rx_status_1,
!done ? ' ' : (rs->rs_status == 0) ? '*' : '!');
}
void
ath5k_debug_printrxbuffs(struct ath5k_hw *ah)
{
struct ath5k_desc *ds;
struct ath5k_buf *bf;
struct ath5k_rx_status rs = {};
int status;
if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC)))
return;
printk(KERN_DEBUG "rxdp %x, rxlink %p\n",
ath5k_hw_get_rxdp(ah), ah->rxlink);
spin_lock_bh(&ah->rxbuflock);
list_for_each_entry(bf, &ah->rxbuf, list) {
ds = bf->desc;
status = ah->ah_proc_rx_desc(ah, ds, &rs);
if (!status)
ath5k_debug_printrxbuf(bf, status == 0, &rs);
}
spin_unlock_bh(&ah->rxbuflock);
}
void
ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf)
{
struct ath5k_desc *ds = bf->desc;
struct ath5k_hw_5212_tx_desc *td = &ds->ud.ds_tx5212;
struct ath5k_tx_status ts = {};
int done;
if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC)))
return;
done = ah->ah_proc_tx_desc(ah, bf->desc, &ts);
printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x "
"%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link,
ds->ds_data, td->tx_ctl.tx_control_0, td->tx_ctl.tx_control_1,
td->tx_ctl.tx_control_2, td->tx_ctl.tx_control_3,
td->tx_stat.tx_status_0, td->tx_stat.tx_status_1,
done ? ' ' : (ts.ts_status == 0) ? '*' : '!');
}
ath5k: Port debug.c over to the new band API and enable as build option This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-04 23:03:54 +08:00
#endif /* ifdef CONFIG_ATH5K_DEBUG */