UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/scsi/atp870u.c

3914 lines
84 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Copyright (C) 1997 Wu Ching Chen
* 2.1.x update (C) 1998 Krzysztof G. Baranowski
* 2.5.x update (C) 2002 Red Hat <alan@redhat.com>
* 2.6.x update (C) 2004 Red Hat <alan@redhat.com>
*
* Marcelo Tosatti <marcelo@conectiva.com.br> : SMP fixes
*
* Wu Ching Chen : NULL pointer fixes 2000/06/02
* support atp876 chip
* enable 32 bit fifo transfer
* support cdrom & remove device run ultra speed
* fix disconnect bug 2000/12/21
* support atp880 chip lvd u160 2001/05/15
* fix prd table bug 2001/09/12 (7.1)
*
* atp885 support add by ACARD Hao Ping Lian 2005/01/05
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
[PATCH] Replace 0xff.. with correct DMA_xBIT_MASK Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 17:56:48 +08:00
#include <linux/dma-mapping.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/system.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include "atp870u.h"
static struct scsi_host_template atp870u_template;
static void send_s870(struct atp_unit *dev,unsigned char c);
static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c);
static void tscam_885(void);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned long flags;
unsigned short int tmpcip, id;
unsigned char i, j, c, target_id, lun,cmdp;
unsigned char *prd;
struct scsi_cmnd *workreq;
unsigned int workport, tmport, tmport1;
unsigned long adrcnt, k;
#ifdef ED_DBGP
unsigned long l;
#endif
int errstus;
struct Scsi_Host *host = dev_id;
struct atp_unit *dev = (struct atp_unit *)&host->hostdata;
for (c = 0; c < 2; c++) {
tmport = dev->ioport[c] + 0x1f;
j = inb(tmport);
if ((j & 0x80) != 0)
{
goto ch_sel;
}
dev->in_int[c] = 0;
}
return IRQ_NONE;
ch_sel:
#ifdef ED_DBGP
printk("atp870u_intr_handle enter\n");
#endif
dev->in_int[c] = 1;
cmdp = inb(dev->ioport[c] + 0x10);
workport = dev->ioport[c];
if (dev->working[c] != 0) {
if (dev->dev_id == ATP885_DEVID) {
tmport1 = workport + 0x16;
if ((inb(tmport1) & 0x80) == 0)
outb((inb(tmport1) | 0x80), tmport1);
}
tmpcip = dev->pciport[c];
if ((inb(tmpcip) & 0x08) != 0)
{
tmpcip += 0x2;
for (k=0; k < 1000; k++) {
if ((inb(tmpcip) & 0x08) == 0) {
goto stop_dma;
}
if ((inb(tmpcip) & 0x01) == 0) {
goto stop_dma;
}
}
}
stop_dma:
tmpcip = dev->pciport[c];
outb(0x00, tmpcip);
tmport -= 0x08;
i = inb(tmport);
if (dev->dev_id == ATP885_DEVID) {
tmpcip += 2;
outb(0x06, tmpcip);
tmpcip -= 2;
}
tmport -= 0x02;
target_id = inb(tmport);
tmport += 0x02;
/*
* Remap wide devices onto id numbers
*/
if ((target_id & 0x40) != 0) {
target_id = (target_id & 0x07) | 0x08;
} else {
target_id &= 0x07;
}
if ((j & 0x40) != 0) {
if (dev->last_cmd[c] == 0xff) {
dev->last_cmd[c] = target_id;
}
dev->last_cmd[c] |= 0x40;
}
if (dev->dev_id == ATP885_DEVID)
dev->r1f[c][target_id] |= j;
#ifdef ED_DBGP
printk("atp870u_intr_handle status = %x\n",i);
#endif
if (i == 0x85) {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
if (dev->dev_id == ATP885_DEVID) {
tmport -= 0x05;
adrcnt = 0;
((unsigned char *) &adrcnt)[2] = inb(tmport++);
((unsigned char *) &adrcnt)[1] = inb(tmport++);
((unsigned char *) &adrcnt)[0] = inb(tmport);
if (dev->id[c][target_id].last_len != adrcnt)
{
k = dev->id[c][target_id].last_len;
k -= adrcnt;
dev->id[c][target_id].tran_len = k;
dev->id[c][target_id].last_len = adrcnt;
}
#ifdef ED_DBGP
printk("tmport = %x dev->id[c][target_id].last_len = %d dev->id[c][target_id].tran_len = %d\n",tmport,dev->id[c][target_id].last_len,dev->id[c][target_id].tran_len);
#endif
}
/*
* Flip wide
*/
if (dev->wide_id[c] != 0) {
tmport = workport + 0x1b;
outb(0x01, tmport);
while ((inb(tmport) & 0x01) != 0x01) {
outb(0x01, tmport);
}
}
/*
* Issue more commands
*/
spin_lock_irqsave(dev->host->host_lock, flags);
if (((dev->quhd[c] != dev->quend[c]) || (dev->last_cmd[c] != 0xff)) &&
(dev->in_snd[c] == 0)) {
#ifdef ED_DBGP
printk("Call sent_s870\n");
#endif
send_s870(dev,c);
}
spin_unlock_irqrestore(dev->host->host_lock, flags);
/*
* Done
*/
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("Status 0x85 return\n");
#endif
goto handled;
}
if (i == 0x40) {
dev->last_cmd[c] |= 0x40;
dev->in_int[c] = 0;
goto handled;
}
if (i == 0x21) {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
tmport -= 0x05;
adrcnt = 0;
((unsigned char *) &adrcnt)[2] = inb(tmport++);
((unsigned char *) &adrcnt)[1] = inb(tmport++);
((unsigned char *) &adrcnt)[0] = inb(tmport);
k = dev->id[c][target_id].last_len;
k -= adrcnt;
dev->id[c][target_id].tran_len = k;
dev->id[c][target_id].last_len = adrcnt;
tmport -= 0x04;
outb(0x41, tmport);
tmport += 0x08;
outb(0x08, tmport);
dev->in_int[c] = 0;
goto handled;
}
if (dev->dev_id == ATP885_DEVID) {
if ((i == 0x4c) || (i == 0x4d) || (i == 0x8c) || (i == 0x8d)) {
if ((i == 0x4c) || (i == 0x8c))
i=0x48;
else
i=0x49;
}
}
if ((i == 0x80) || (i == 0x8f)) {
#ifdef ED_DBGP
printk(KERN_DEBUG "Device reselect\n");
#endif
lun = 0;
tmport -= 0x07;
if (cmdp == 0x44 || i==0x80) {
tmport += 0x0d;
lun = inb(tmport) & 0x07;
} else {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
if (cmdp == 0x41) {
#ifdef ED_DBGP
printk("cmdp = 0x41\n");
#endif
tmport += 0x02;
adrcnt = 0;
((unsigned char *) &adrcnt)[2] = inb(tmport++);
((unsigned char *) &adrcnt)[1] = inb(tmport++);
((unsigned char *) &adrcnt)[0] = inb(tmport);
k = dev->id[c][target_id].last_len;
k -= adrcnt;
dev->id[c][target_id].tran_len = k;
dev->id[c][target_id].last_len = adrcnt;
tmport += 0x04;
outb(0x08, tmport);
dev->in_int[c] = 0;
goto handled;
} else {
#ifdef ED_DBGP
printk("cmdp != 0x41\n");
#endif
outb(0x46, tmport);
dev->id[c][target_id].dirct = 0x00;
tmport += 0x02;
outb(0x00, tmport++);
outb(0x00, tmport++);
outb(0x00, tmport++);
tmport += 0x03;
outb(0x08, tmport);
dev->in_int[c] = 0;
goto handled;
}
}
if (dev->last_cmd[c] != 0xff) {
dev->last_cmd[c] |= 0x40;
}
if (dev->dev_id == ATP885_DEVID) {
j = inb(dev->baseport + 0x29) & 0xfe;
outb(j, dev->baseport + 0x29);
tmport = workport + 0x16;
} else {
tmport = workport + 0x10;
outb(0x45, tmport);
tmport += 0x06;
}
target_id = inb(tmport);
/*
* Remap wide identifiers
*/
if ((target_id & 0x10) != 0) {
target_id = (target_id & 0x07) | 0x08;
} else {
target_id &= 0x07;
}
if (dev->dev_id == ATP885_DEVID) {
tmport = workport + 0x10;
outb(0x45, tmport);
}
workreq = dev->id[c][target_id].curr_req;
#ifdef ED_DBGP
[SCSI] use sfoo_printk() in drivers Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:04:36 +08:00
scmd_printk(KERN_DEBUG, workreq, "CDB");
for (l = 0; l < workreq->cmd_len; l++)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_DEBUG " %x",workreq->cmnd[l]);
[SCSI] use sfoo_printk() in drivers Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:04:36 +08:00
printk("\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
tmport = workport + 0x0f;
outb(lun, tmport);
tmport += 0x02;
outb(dev->id[c][target_id].devsp, tmport++);
adrcnt = dev->id[c][target_id].tran_len;
k = dev->id[c][target_id].last_len;
outb(((unsigned char *) &k)[2], tmport++);
outb(((unsigned char *) &k)[1], tmport++);
outb(((unsigned char *) &k)[0], tmport++);
#ifdef ED_DBGP
printk("k %x, k[0] 0x%x k[1] 0x%x k[2] 0x%x\n", k, inb(tmport-1), inb(tmport-2), inb(tmport-3));
#endif
/* Remap wide */
j = target_id;
if (target_id > 7) {
j = (j & 0x07) | 0x40;
}
/* Add direction */
j |= dev->id[c][target_id].dirct;
outb(j, tmport++);
outb(0x80,tmport);
/* enable 32 bit fifo transfer */
if (dev->dev_id == ATP885_DEVID) {
tmpcip = dev->pciport[c] + 1;
i=inb(tmpcip) & 0xf3;
//j=workreq->cmnd[0];
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
i |= 0x0c;
}
outb(i,tmpcip);
} else if ((dev->dev_id == ATP880_DEVID1) ||
(dev->dev_id == ATP880_DEVID2) ) {
tmport = workport - 0x05;
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
outb((unsigned char) ((inb(tmport) & 0x3f) | 0xc0), tmport);
} else {
outb((unsigned char) (inb(tmport) & 0x3f), tmport);
}
} else {
tmport = workport + 0x3a;
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
outb((unsigned char) ((inb(tmport) & 0xf3) | 0x08), tmport);
} else {
outb((unsigned char) (inb(tmport) & 0xf3), tmport);
}
}
tmport = workport + 0x1b;
j = 0;
id = 1;
id = id << target_id;
/*
* Is this a wide device
*/
if ((id & dev->wide_id[c]) != 0) {
j |= 0x01;
}
outb(j, tmport);
while ((inb(tmport) & 0x01) != j) {
outb(j,tmport);
}
if (dev->id[c][target_id].last_len == 0) {
tmport = workport + 0x18;
outb(0x08, tmport);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("dev->id[c][target_id].last_len = 0\n");
#endif
goto handled;
}
#ifdef ED_DBGP
printk("target_id = %d adrcnt = %d\n",target_id,adrcnt);
#endif
prd = dev->id[c][target_id].prd_pos;
while (adrcnt != 0) {
id = ((unsigned short int *)prd)[2];
if (id == 0) {
k = 0x10000;
} else {
k = id;
}
if (k > adrcnt) {
((unsigned short int *)prd)[2] = (unsigned short int)
(k - adrcnt);
((unsigned long *)prd)[0] += adrcnt;
adrcnt = 0;
dev->id[c][target_id].prd_pos = prd;
} else {
adrcnt -= k;
dev->id[c][target_id].prdaddr += 0x08;
prd += 0x08;
if (adrcnt == 0) {
dev->id[c][target_id].prd_pos = prd;
}
}
}
tmpcip = dev->pciport[c] + 0x04;
outl(dev->id[c][target_id].prdaddr, tmpcip);
#ifdef ED_DBGP
printk("dev->id[%d][%d].prdaddr 0x%8x\n", c, target_id, dev->id[c][target_id].prdaddr);
#endif
if (dev->dev_id == ATP885_DEVID) {
tmpcip -= 0x04;
} else {
tmpcip -= 0x02;
outb(0x06, tmpcip);
outb(0x00, tmpcip);
tmpcip -= 0x02;
}
tmport = workport + 0x18;
/*
* Check transfer direction
*/
if (dev->id[c][target_id].dirct != 0) {
outb(0x08, tmport);
outb(0x01, tmpcip);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct != 0\n");
#endif
goto handled;
}
outb(0x08, tmport);
outb(0x09, tmpcip);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct = 0\n");
#endif
goto handled;
}
/*
* Current scsi request on this target
*/
workreq = dev->id[c][target_id].curr_req;
if (i == 0x42) {
if ((dev->last_cmd[c] & 0xf0) != 0x40)
{
dev->last_cmd[c] = 0xff;
}
errstus = 0x02;
workreq->result = errstus;
goto go_42;
}
if (i == 0x16) {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
errstus = 0;
tmport -= 0x08;
errstus = inb(tmport);
if (((dev->r1f[c][target_id] & 0x10) != 0)&&(dev->dev_id==ATP885_DEVID)) {
printk(KERN_WARNING "AEC67162 CRC ERROR !\n");
errstus = 0x02;
}
workreq->result = errstus;
go_42:
if (dev->dev_id == ATP885_DEVID) {
j = inb(dev->baseport + 0x29) | 0x01;
outb(j, dev->baseport + 0x29);
}
/*
* Complete the command
*/
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
scsi_dma_unmap(workreq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irqsave(dev->host->host_lock, flags);
(*workreq->scsi_done) (workreq);
#ifdef ED_DBGP
printk("workreq->scsi_done\n");
#endif
/*
* Clear it off the queue
*/
dev->id[c][target_id].curr_req = NULL;
dev->working[c]--;
spin_unlock_irqrestore(dev->host->host_lock, flags);
/*
* Take it back wide
*/
if (dev->wide_id[c] != 0) {
tmport = workport + 0x1b;
outb(0x01, tmport);
while ((inb(tmport) & 0x01) != 0x01) {
outb(0x01, tmport);
}
}
/*
* If there is stuff to send and nothing going then send it
*/
spin_lock_irqsave(dev->host->host_lock, flags);
if (((dev->last_cmd[c] != 0xff) || (dev->quhd[c] != dev->quend[c])) &&
(dev->in_snd[c] == 0)) {
#ifdef ED_DBGP
printk("Call sent_s870(scsi_done)\n");
#endif
send_s870(dev,c);
}
spin_unlock_irqrestore(dev->host->host_lock, flags);
dev->in_int[c] = 0;
goto handled;
}
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
if (i == 0x4f) {
i = 0x89;
}
i &= 0x0f;
if (i == 0x09) {
tmpcip += 4;
outl(dev->id[c][target_id].prdaddr, tmpcip);
tmpcip = tmpcip - 2;
outb(0x06, tmpcip);
outb(0x00, tmpcip);
tmpcip = tmpcip - 2;
tmport = workport + 0x10;
outb(0x41, tmport);
if (dev->dev_id == ATP885_DEVID) {
tmport += 2;
k = dev->id[c][target_id].last_len;
outb((unsigned char) (((unsigned char *) (&k))[2]), tmport++);
outb((unsigned char) (((unsigned char *) (&k))[1]), tmport++);
outb((unsigned char) (((unsigned char *) (&k))[0]), tmport);
dev->id[c][target_id].dirct = 0x00;
tmport += 0x04;
} else {
dev->id[c][target_id].dirct = 0x00;
tmport += 0x08;
}
outb(0x08, tmport);
outb(0x09, tmpcip);
dev->in_int[c] = 0;
goto handled;
}
if (i == 0x08) {
tmpcip += 4;
outl(dev->id[c][target_id].prdaddr, tmpcip);
tmpcip = tmpcip - 2;
outb(0x06, tmpcip);
outb(0x00, tmpcip);
tmpcip = tmpcip - 2;
tmport = workport + 0x10;
outb(0x41, tmport);
if (dev->dev_id == ATP885_DEVID) {
tmport += 2;
k = dev->id[c][target_id].last_len;
outb((unsigned char) (((unsigned char *) (&k))[2]), tmport++);
outb((unsigned char) (((unsigned char *) (&k))[1]), tmport++);
outb((unsigned char) (((unsigned char *) (&k))[0]), tmport++);
} else {
tmport += 5;
}
outb((unsigned char) (inb(tmport) | 0x20), tmport);
dev->id[c][target_id].dirct = 0x20;
tmport += 0x03;
outb(0x08, tmport);
outb(0x01, tmpcip);
dev->in_int[c] = 0;
goto handled;
}
tmport -= 0x07;
if (i == 0x0a) {
outb(0x30, tmport);
} else {
outb(0x46, tmport);
}
dev->id[c][target_id].dirct = 0x00;
tmport += 0x02;
outb(0x00, tmport++);
outb(0x00, tmport++);
outb(0x00, tmport++);
tmport += 0x03;
outb(0x08, tmport);
dev->in_int[c] = 0;
goto handled;
} else {
// tmport = workport + 0x17;
// inb(tmport);
// dev->working[c] = 0;
dev->in_int[c] = 0;
goto handled;
}
handled:
#ifdef ED_DBGP
printk("atp870u_intr_handle exit\n");
#endif
return IRQ_HANDLED;
}
/**
* atp870u_queuecommand - Queue SCSI command
* @req_p: request block
* @done: completion function
*
* Queue a command to the ATP queue. Called with the host lock held.
*/
static int atp870u_queuecommand(struct scsi_cmnd * req_p,
void (*done) (struct scsi_cmnd *))
{
unsigned char c;
unsigned int tmport,m;
struct atp_unit *dev;
struct Scsi_Host *host;
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
c = scmd_channel(req_p);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
req_p->sense_buffer[0]=0;
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
scsi_set_resid(req_p, 0);
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
if (scmd_channel(req_p) > 1) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
req_p->result = 0x00040000;
done(req_p);
#ifdef ED_DBGP
printk("atp870u_queuecommand : req_p->device->channel > 1\n");
#endif
return 0;
}
host = req_p->device->host;
dev = (struct atp_unit *)&host->hostdata;
m = 1;
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
m = m << scmd_id(req_p);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Fake a timeout for missing targets
*/
if ((m & dev->active_id[c]) == 0) {
req_p->result = 0x00040000;
done(req_p);
return 0;
}
if (done) {
req_p->scsi_done = done;
} else {
#ifdef ED_DBGP
printk( "atp870u_queuecommand: done can't be NULL\n");
#endif
req_p->result = 0;
done(req_p);
return 0;
}
/*
* Count new command
*/
dev->quend[c]++;
if (dev->quend[c] >= qcnt) {
dev->quend[c] = 0;
}
/*
* Check queue state
*/
if (dev->quhd[c] == dev->quend[c]) {
if (dev->quend[c] == 0) {
dev->quend[c] = qcnt;
}
#ifdef ED_DBGP
printk("atp870u_queuecommand : dev->quhd[c] == dev->quend[c]\n");
#endif
dev->quend[c]--;
req_p->result = 0x00020000;
done(req_p);
return 0;
}
dev->quereq[c][dev->quend[c]] = req_p;
tmport = dev->ioport[c] + 0x1c;
#ifdef ED_DBGP
printk("dev->ioport[c] = %x inb(tmport) = %x dev->in_int[%d] = %d dev->in_snd[%d] = %d\n",dev->ioport[c],inb(tmport),c,dev->in_int[c],c,dev->in_snd[c]);
#endif
if ((inb(tmport) == 0) && (dev->in_int[c] == 0) && (dev->in_snd[c] == 0)) {
#ifdef ED_DBGP
printk("Call sent_s870(atp870u_queuecommand)\n");
#endif
send_s870(dev,c);
}
#ifdef ED_DBGP
printk("atp870u_queuecommand : exit\n");
#endif
return 0;
}
/**
* send_s870 - send a command to the controller
* @host: host
*
* On entry there is work queued to be done. We move some of that work to the
* controller itself.
*
* Caller holds the host lock.
*/
static void send_s870(struct atp_unit *dev,unsigned char c)
{
unsigned int tmport;
struct scsi_cmnd *workreq;
unsigned int i;//,k;
unsigned char j, target_id;
unsigned char *prd;
unsigned short int tmpcip, w;
unsigned long l, bttl = 0;
unsigned int workport;
unsigned long sg_count;
if (dev->in_snd[c] != 0) {
#ifdef ED_DBGP
printk("cmnd in_snd\n");
#endif
return;
}
#ifdef ED_DBGP
printk("Sent_s870 enter\n");
#endif
dev->in_snd[c] = 1;
if ((dev->last_cmd[c] != 0xff) && ((dev->last_cmd[c] & 0x40) != 0)) {
dev->last_cmd[c] &= 0x0f;
workreq = dev->id[c][dev->last_cmd[c]].curr_req;
if (workreq != NULL) { /* check NULL pointer */
goto cmd_subp;
}
dev->last_cmd[c] = 0xff;
if (dev->quhd[c] == dev->quend[c]) {
dev->in_snd[c] = 0;
return ;
}
}
if ((dev->last_cmd[c] != 0xff) && (dev->working[c] != 0)) {
dev->in_snd[c] = 0;
return ;
}
dev->working[c]++;
j = dev->quhd[c];
dev->quhd[c]++;
if (dev->quhd[c] >= qcnt) {
dev->quhd[c] = 0;
}
workreq = dev->quereq[c][dev->quhd[c]];
scsi: fix integer as NULL pointer warning drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 06:45:07 +08:00
if (dev->id[c][scmd_id(workreq)].curr_req == NULL) {
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
dev->id[c][scmd_id(workreq)].curr_req = workreq;
dev->last_cmd[c] = scmd_id(workreq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto cmd_subp;
}
dev->quhd[c] = j;
dev->working[c]--;
dev->in_snd[c] = 0;
return;
cmd_subp:
workport = dev->ioport[c];
tmport = workport + 0x1f;
if ((inb(tmport) & 0xb0) != 0) {
goto abortsnd;
}
tmport = workport + 0x1c;
if (inb(tmport) == 0) {
goto oktosend;
}
abortsnd:
#ifdef ED_DBGP
printk("Abort to Send\n");
#endif
dev->last_cmd[c] |= 0x40;
dev->in_snd[c] = 0;
return;
oktosend:
#ifdef ED_DBGP
printk("OK to Send\n");
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
scmd_printk(KERN_DEBUG, workreq, "CDB");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for(i=0;i<workreq->cmd_len;i++) {
printk(" %x",workreq->cmnd[i]);
}
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
printk("\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
l = scsi_bufflen(workreq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (dev->dev_id == ATP885_DEVID) {
j = inb(dev->baseport + 0x29) & 0xfe;
outb(j, dev->baseport + 0x29);
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
dev->r1f[c][scmd_id(workreq)] = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (workreq->cmnd[0] == READ_CAPACITY) {
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
if (l > 8)
l = 8;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (workreq->cmnd[0] == 0x00) {
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
l = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
tmport = workport + 0x1b;
j = 0;
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
target_id = scmd_id(workreq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Wide ?
*/
w = 1;
w = w << target_id;
if ((w & dev->wide_id[c]) != 0) {
j |= 0x01;
}
outb(j, tmport);
while ((inb(tmport) & 0x01) != j) {
outb(j,tmport);
#ifdef ED_DBGP
printk("send_s870 while loop 1\n");
#endif
}
/*
* Write the command
*/
tmport = workport;
outb(workreq->cmd_len, tmport++);
outb(0x2c, tmport++);
if (dev->dev_id == ATP885_DEVID) {
outb(0x7f, tmport++);
} else {
outb(0xcf, tmport++);
}
for (i = 0; i < workreq->cmd_len; i++) {
outb(workreq->cmnd[i], tmport++);
}
tmport = workport + 0x0f;
outb(workreq->device->lun, tmport);
tmport += 0x02;
/*
* Write the target
*/
outb(dev->id[c][target_id].devsp, tmport++);
#ifdef ED_DBGP
printk("dev->id[%d][%d].devsp = %2x\n",c,target_id,dev->id[c][target_id].devsp);
#endif
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
sg_count = scsi_dma_map(workreq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Write transfer size
*/
outb((unsigned char) (((unsigned char *) (&l))[2]), tmport++);
outb((unsigned char) (((unsigned char *) (&l))[1]), tmport++);
outb((unsigned char) (((unsigned char *) (&l))[0]), tmport++);
j = target_id;
dev->id[c][j].last_len = l;
dev->id[c][j].tran_len = 0;
#ifdef ED_DBGP
printk("dev->id[%2d][%2d].last_len = %d\n",c,j,dev->id[c][j].last_len);
#endif
/*
* Flip the wide bits
*/
if ((j & 0x08) != 0) {
j = (j & 0x07) | 0x40;
}
/*
* Check transfer direction
*/
if (workreq->sc_data_direction == DMA_TO_DEVICE) {
outb((unsigned char) (j | 0x20), tmport++);
} else {
outb(j, tmport++);
}
outb((unsigned char) (inb(tmport) | 0x80), tmport);
outb(0x80, tmport);
tmport = workport + 0x1c;
dev->id[c][target_id].dirct = 0;
if (l == 0) {
if (inb(tmport) == 0) {
tmport = workport + 0x18;
#ifdef ED_DBGP
printk("change SCSI_CMD_REG 0x08\n");
#endif
outb(0x08, tmport);
} else {
dev->last_cmd[c] |= 0x40;
}
dev->in_snd[c] = 0;
return;
}
tmpcip = dev->pciport[c];
prd = dev->id[c][target_id].prd_table;
dev->id[c][target_id].prd_pos = prd;
/*
* Now write the request list. Either as scatter/gather or as
* a linear chain.
*/
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
if (l) {
struct scatterlist *sgpnt;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
i = 0;
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
scsi_for_each_sg(workreq, sgpnt, sg_count, j) {
bttl = sg_dma_address(sgpnt);
l=sg_dma_len(sgpnt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef ED_DBGP
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
printk("1. bttl %x, l %x\n",bttl, l);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
[SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-09-10 02:06:23 +08:00
while (l > 0x10000) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(((u16 *) (prd))[i + 3]) = 0x0000;
(((u16 *) (prd))[i + 2]) = 0x0000;
(((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl);
l -= 0x10000;
bttl += 0x10000;
i += 0x04;
}
(((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl);
(((u16 *) (prd))[i + 2]) = cpu_to_le16(l);
(((u16 *) (prd))[i + 3]) = 0;
i += 0x04;
}
(((u16 *) (prd))[i - 1]) = cpu_to_le16(0x8000);
#ifdef ED_DBGP
printk("prd %4x %4x %4x %4x\n",(((unsigned short int *)prd)[0]),(((unsigned short int *)prd)[1]),(((unsigned short int *)prd)[2]),(((unsigned short int *)prd)[3]));
printk("2. bttl %x, l %x\n",bttl, l);
#endif
}
tmpcip += 4;
#ifdef ED_DBGP
printk("send_s870: prdaddr_2 0x%8x tmpcip %x target_id %d\n", dev->id[c][target_id].prdaddr,tmpcip,target_id);
#endif
[SCSI] atp870u: fix memory addressing bug From: Alan Cox <alan@redhat.com> The virt_to_bus() wasn't correctly taken out of this driver. It needs to be able to track both physical and virtual addresses for its prd table. Update the driver to do this with separate tracking entries. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-15 21:59:36 +08:00
dev->id[c][target_id].prdaddr = dev->id[c][target_id].prd_bus;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outl(dev->id[c][target_id].prdaddr, tmpcip);
tmpcip = tmpcip - 2;
outb(0x06, tmpcip);
outb(0x00, tmpcip);
if (dev->dev_id == ATP885_DEVID) {
tmpcip--;
j=inb(tmpcip) & 0xf3;
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) ||
(workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
j |= 0x0c;
}
outb(j,tmpcip);
tmpcip--;
} else if ((dev->dev_id == ATP880_DEVID1) ||
(dev->dev_id == ATP880_DEVID2)) {
tmpcip =tmpcip -2;
tmport = workport - 0x05;
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
outb((unsigned char) ((inb(tmport) & 0x3f) | 0xc0), tmport);
} else {
outb((unsigned char) (inb(tmport) & 0x3f), tmport);
}
} else {
tmpcip =tmpcip -2;
tmport = workport + 0x3a;
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
outb((inb(tmport) & 0xf3) | 0x08, tmport);
} else {
outb(inb(tmport) & 0xf3, tmport);
}
}
tmport = workport + 0x1c;
if(workreq->sc_data_direction == DMA_TO_DEVICE) {
dev->id[c][target_id].dirct = 0x20;
if (inb(tmport) == 0) {
tmport = workport + 0x18;
outb(0x08, tmport);
outb(0x01, tmpcip);
#ifdef ED_DBGP
printk( "start DMA(to target)\n");
#endif
} else {
dev->last_cmd[c] |= 0x40;
}
dev->in_snd[c] = 0;
return;
}
if (inb(tmport) == 0) {
tmport = workport + 0x18;
outb(0x08, tmport);
outb(0x09, tmpcip);
#ifdef ED_DBGP
printk( "start DMA(to host)\n");
#endif
} else {
dev->last_cmd[c] |= 0x40;
}
dev->in_snd[c] = 0;
return;
}
static unsigned char fun_scam(struct atp_unit *dev, unsigned short int *val)
{
unsigned int tmport;
unsigned short int i, k;
unsigned char j;
tmport = dev->ioport[0] + 0x1c;
outw(*val, tmport);
FUN_D7:
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
k = inw(tmport);
j = (unsigned char) (k >> 8);
if ((k & 0x8000) != 0) { /* DB7 all release? */
goto FUN_D7;
}
}
*val |= 0x4000; /* assert DB6 */
outw(*val, tmport);
*val &= 0xdfff; /* assert DB5 */
outw(*val, tmport);
FUN_D5:
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
if ((inw(tmport) & 0x2000) != 0) { /* DB5 all release? */
goto FUN_D5;
}
}
*val |= 0x8000; /* no DB4-0, assert DB7 */
*val &= 0xe0ff;
outw(*val, tmport);
*val &= 0xbfff; /* release DB6 */
outw(*val, tmport);
FUN_D6:
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
if ((inw(tmport) & 0x4000) != 0) { /* DB6 all release? */
goto FUN_D6;
}
}
return j;
}
static void tscam(struct Scsi_Host *host)
{
unsigned int tmport;
unsigned char i, j, k;
unsigned long n;
unsigned short int m, assignid_map, val;
unsigned char mbuf[33], quintet[2];
struct atp_unit *dev = (struct atp_unit *)&host->hostdata;
static unsigned char g2q_tab[8] = {
0x38, 0x31, 0x32, 0x2b, 0x34, 0x2d, 0x2e, 0x27
};
/* I can't believe we need this before we've even done anything. Remove it
* and see if anyone bitches.
for (i = 0; i < 0x10; i++) {
udelay(0xffff);
}
*/
tmport = dev->ioport[0] + 1;
outb(0x08, tmport++);
outb(0x7f, tmport);
tmport = dev->ioport[0] + 0x11;
outb(0x20, tmport);
if ((dev->scam_on & 0x40) == 0) {
return;
}
m = 1;
m <<= dev->host_id[0];
j = 16;
if (dev->chip_ver < 4) {
m |= 0xff00;
j = 8;
}
assignid_map = m;
tmport = dev->ioport[0] + 0x02;
outb(0x02, tmport++); /* 2*2=4ms,3EH 2/32*3E=3.9ms */
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
for (i = 0; i < j; i++) {
m = 1;
m = m << i;
if ((m & assignid_map) != 0) {
continue;
}
tmport = dev->ioport[0] + 0x0f;
outb(0, tmport++);
tmport += 0x02;
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
if (i > 7) {
k = (i & 0x07) | 0x40;
} else {
k = i;
}
outb(k, tmport++);
tmport = dev->ioport[0] + 0x1b;
if (dev->chip_ver == 4) {
outb(0x01, tmport);
} else {
outb(0x00, tmport);
}
wait_rdyok:
tmport = dev->ioport[0] + 0x18;
outb(0x09, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
k = inb(tmport);
if (k != 0x16) {
if ((k == 0x85) || (k == 0x42)) {
continue;
}
tmport = dev->ioport[0] + 0x10;
outb(0x41, tmport);
goto wait_rdyok;
}
assignid_map |= m;
}
tmport = dev->ioport[0] + 0x02;
outb(0x7f, tmport);
tmport = dev->ioport[0] + 0x1b;
outb(0x02, tmport);
outb(0, 0x80);
val = 0x0080; /* bsy */
tmport = dev->ioport[0] + 0x1c;
outw(val, tmport);
val |= 0x0040; /* sel */
outw(val, tmport);
val |= 0x0004; /* msg */
outw(val, tmport);
inb(0x80); /* 2 deskew delay(45ns*2=90ns) */
val &= 0x007f; /* no bsy */
outw(val, tmport);
mdelay(128);
val &= 0x00fb; /* after 1ms no msg */
outw(val, tmport);
wait_nomsg:
if ((inb(tmport) & 0x04) != 0) {
goto wait_nomsg;
}
outb(1, 0x80);
udelay(100);
for (n = 0; n < 0x30000; n++) {
if ((inb(tmport) & 0x80) != 0) { /* bsy ? */
goto wait_io;
}
}
goto TCM_SYNC;
wait_io:
for (n = 0; n < 0x30000; n++) {
if ((inb(tmport) & 0x81) == 0x0081) {
goto wait_io1;
}
}
goto TCM_SYNC;
wait_io1:
inb(0x80);
val |= 0x8003; /* io,cd,db7 */
outw(val, tmport);
inb(0x80);
val &= 0x00bf; /* no sel */
outw(val, tmport);
outb(2, 0x80);
TCM_SYNC:
udelay(0x800);
if ((inb(tmport) & 0x80) == 0x00) { /* bsy ? */
outw(0, tmport--);
outb(0, tmport);
tmport = dev->ioport[0] + 0x15;
outb(0, tmport);
tmport += 0x03;
outb(0x09, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0)
cpu_relax();
tmport -= 0x08;
inb(tmport);
return;
}
val &= 0x00ff; /* synchronization */
val |= 0x3f00;
fun_scam(dev, &val);
outb(3, 0x80);
val &= 0x00ff; /* isolation */
val |= 0x2000;
fun_scam(dev, &val);
outb(4, 0x80);
i = 8;
j = 0;
TCM_ID:
if ((inw(tmport) & 0x2000) == 0) {
goto TCM_ID;
}
outb(5, 0x80);
val &= 0x00ff; /* get ID_STRING */
val |= 0x2000;
k = fun_scam(dev, &val);
if ((k & 0x03) == 0) {
goto TCM_5;
}
mbuf[j] <<= 0x01;
mbuf[j] &= 0xfe;
if ((k & 0x02) != 0) {
mbuf[j] |= 0x01;
}
i--;
if (i > 0) {
goto TCM_ID;
}
j++;
i = 8;
goto TCM_ID;
TCM_5: /* isolation complete.. */
/* mbuf[32]=0;
printk(" \n%x %x %x %s\n ",assignid_map,mbuf[0],mbuf[1],&mbuf[2]); */
i = 15;
j = mbuf[0];
if ((j & 0x20) != 0) { /* bit5=1:ID upto 7 */
i = 7;
}
if ((j & 0x06) == 0) { /* IDvalid? */
goto G2Q5;
}
k = mbuf[1];
small_id:
m = 1;
m <<= k;
if ((m & assignid_map) == 0) {
goto G2Q_QUIN;
}
if (k > 0) {
k--;
goto small_id;
}
G2Q5: /* srch from max acceptable ID# */
k = i; /* max acceptable ID# */
G2Q_LP:
m = 1;
m <<= k;
if ((m & assignid_map) == 0) {
goto G2Q_QUIN;
}
if (k > 0) {
k--;
goto G2Q_LP;
}
G2Q_QUIN: /* k=binID#, */
assignid_map |= m;
if (k < 8) {
quintet[0] = 0x38; /* 1st dft ID<8 */
} else {
quintet[0] = 0x31; /* 1st ID>=8 */
}
k &= 0x07;
quintet[1] = g2q_tab[k];
val &= 0x00ff; /* AssignID 1stQuintet,AH=001xxxxx */
m = quintet[0] << 8;
val |= m;
fun_scam(dev, &val);
val &= 0x00ff; /* AssignID 2ndQuintet,AH=001xxxxx */
m = quintet[1] << 8;
val |= m;
fun_scam(dev, &val);
goto TCM_SYNC;
}
static void is870(struct atp_unit *dev, unsigned int wkport)
{
unsigned int tmport;
unsigned char i, j, k, rmb, n;
unsigned short int m;
static unsigned char mbuf[512];
static unsigned char satn[9] = { 0, 0, 0, 0, 0, 0, 0, 6, 6 };
static unsigned char inqd[9] = { 0x12, 0, 0, 0, 0x24, 0, 0, 0x24, 6 };
static unsigned char synn[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
static unsigned char synu[6] = { 0x80, 1, 3, 1, 0x0c, 0x0e };
static unsigned char synw[6] = { 0x80, 1, 3, 1, 0x0c, 0x07 };
static unsigned char wide[6] = { 0x80, 1, 2, 3, 1, 0 };
tmport = wkport + 0x3a;
outb((unsigned char) (inb(tmport) | 0x10), tmport);
for (i = 0; i < 16; i++) {
if ((dev->chip_ver != 4) && (i > 7)) {
break;
}
m = 1;
m = m << i;
if ((m & dev->active_id[0]) != 0) {
continue;
}
if (i == dev->host_id[0]) {
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[0]);
continue;
}
tmport = wkport + 0x1b;
if (dev->chip_ver == 4) {
outb(0x01, tmport);
} else {
outb(0x00, tmport);
}
tmport = wkport + 1;
outb(0x08, tmport++);
outb(0x7f, tmport++);
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
j = i;
if ((j & 0x08) != 0) {
j = (j & 0x07) | 0x40;
}
outb(j, tmport);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
dev->active_id[0] |= m;
tmport = wkport + 0x10;
outb(0x30, tmport);
tmport = wkport + 0x04;
outb(0x00, tmport);
phase_cmd:
tmport = wkport + 0x18;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
tmport = wkport + 0x10;
outb(0x41, tmport);
goto phase_cmd;
}
sel_ok:
tmport = wkport + 3;
outb(inqd[0], tmport++);
outb(inqd[1], tmport++);
outb(inqd[2], tmport++);
outb(inqd[3], tmport++);
outb(inqd[4], tmport++);
outb(inqd[5], tmport);
tmport += 0x07;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(inqd[6], tmport++);
outb(inqd[7], tmport++);
tmport += 0x03;
outb(inqd[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
tmport = wkport + 0x1b;
if (dev->chip_ver == 4)
outb(0x00, tmport);
tmport = wkport + 0x18;
outb(0x08, tmport);
tmport += 0x07;
j = 0;
rd_inq_data:
k = inb(tmport);
if ((k & 0x01) != 0) {
tmport -= 0x06;
mbuf[j++] = inb(tmport);
tmport += 0x06;
goto rd_inq_data;
}
if ((k & 0x80) == 0) {
goto rd_inq_data;
}
tmport -= 0x08;
j = inb(tmport);
if (j == 0x16) {
goto inq_ok;
}
tmport = wkport + 0x10;
outb(0x46, tmport);
tmport += 0x02;
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
tmport += 0x03;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x16) {
goto sel_ok;
}
inq_ok:
mbuf[36] = 0;
printk(KERN_INFO " ID: %2d %s\n", i, &mbuf[8]);
dev->id[0][i].devtype = mbuf[0];
rmb = mbuf[1];
n = mbuf[7];
if (dev->chip_ver != 4) {
goto not_wide;
}
if ((mbuf[7] & 0x60) == 0) {
goto not_wide;
}
if ((dev->global_map[0] & 0x20) == 0) {
goto not_wide;
}
tmport = wkport + 0x1b;
outb(0x01, tmport);
tmport = wkport + 3;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
try_wide:
j = 0;
tmport = wkport + 0x14;
outb(0x05, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(wide[j++], tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto try_wide;
}
continue;
widep_out:
tmport = wkport + 0x18;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(0, tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto widep_out;
}
continue;
widep_in:
tmport = wkport + 0x14;
outb(0xff, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
widep_in1:
j = inb(tmport);
if ((j & 0x01) != 0) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto widep_in1;
}
if ((j & 0x80) == 0x00) {
goto widep_in1;
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto widep_out;
}
continue;
widep_cmd:
tmport = wkport + 0x10;
outb(0x30, tmport);
tmport = wkport + 0x14;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
if (j == 0x4e) {
goto widep_out;
}
continue;
}
if (mbuf[0] != 0x01) {
goto not_wide;
}
if (mbuf[1] != 0x02) {
goto not_wide;
}
if (mbuf[2] != 0x03) {
goto not_wide;
}
if (mbuf[3] != 0x01) {
goto not_wide;
}
m = 1;
m = m << i;
dev->wide_id[0] |= m;
not_wide:
if ((dev->id[0][i].devtype == 0x00) || (dev->id[0][i].devtype == 0x07) || ((dev->id[0][i].devtype == 0x05) && ((n & 0x10) != 0))) {
goto set_sync;
}
continue;
set_sync:
tmport = wkport + 0x1b;
j = 0;
if ((m & dev->wide_id[0]) != 0) {
j |= 0x01;
}
outb(j, tmport);
tmport = wkport + 3;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
try_sync:
j = 0;
tmport = wkport + 0x14;
outb(0x06, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
if ((m & dev->wide_id[0]) != 0) {
outb(synw[j++], tmport);
} else {
if ((m & dev->ultra_map[0]) != 0) {
outb(synu[j++], tmport);
} else {
outb(synn[j++], tmport);
}
}
tmport += 0x06;
}
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto try_sync;
}
continue;
phase_outs:
tmport = wkport + 0x18;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00) {
if ((inb(tmport) & 0x01) != 0x00) {
tmport -= 0x06;
outb(0x00, tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
j = inb(tmport);
if (j == 0x85) {
goto tar_dcons;
}
j &= 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto phase_outs;
}
continue;
phase_ins:
tmport = wkport + 0x14;
outb(0xff, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
phase_ins1:
j = inb(tmport);
if ((j & 0x01) != 0x00) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto phase_ins1;
}
if ((j & 0x80) == 0x00) {
goto phase_ins1;
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport);
if (j == 0x85) {
goto tar_dcons;
}
j &= 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto phase_outs;
}
continue;
phase_cmds:
tmport = wkport + 0x10;
outb(0x30, tmport);
tar_dcons:
tmport = wkport + 0x14;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
continue;
}
if (mbuf[0] != 0x01) {
continue;
}
if (mbuf[1] != 0x03) {
continue;
}
if (mbuf[4] == 0x00) {
continue;
}
if (mbuf[3] > 0x64) {
continue;
}
if (mbuf[4] > 0x0c) {
mbuf[4] = 0x0c;
}
dev->id[0][i].devsp = mbuf[4];
if ((mbuf[3] < 0x0d) && (rmb == 0)) {
j = 0xa0;
goto set_syn_ok;
}
if (mbuf[3] < 0x1a) {
j = 0x20;
goto set_syn_ok;
}
if (mbuf[3] < 0x33) {
j = 0x40;
goto set_syn_ok;
}
if (mbuf[3] < 0x4c) {
j = 0x50;
goto set_syn_ok;
}
j = 0x60;
set_syn_ok:
dev->id[0][i].devsp = (dev->id[0][i].devsp & 0x0f) | j;
}
tmport = wkport + 0x3a;
outb((unsigned char) (inb(tmport) & 0xef), tmport);
}
static void is880(struct atp_unit *dev, unsigned int wkport)
{
unsigned int tmport;
unsigned char i, j, k, rmb, n, lvdmode;
unsigned short int m;
static unsigned char mbuf[512];
static unsigned char satn[9] = { 0, 0, 0, 0, 0, 0, 0, 6, 6 };
static unsigned char inqd[9] = { 0x12, 0, 0, 0, 0x24, 0, 0, 0x24, 6 };
static unsigned char synn[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
unsigned char synu[6] = { 0x80, 1, 3, 1, 0x0a, 0x0e };
static unsigned char synw[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
unsigned char synuw[6] = { 0x80, 1, 3, 1, 0x0a, 0x0e };
static unsigned char wide[6] = { 0x80, 1, 2, 3, 1, 0 };
static unsigned char u3[9] = { 0x80, 1, 6, 4, 0x09, 00, 0x0e, 0x01, 0x02 };
lvdmode = inb(wkport + 0x3f) & 0x40;
for (i = 0; i < 16; i++) {
m = 1;
m = m << i;
if ((m & dev->active_id[0]) != 0) {
continue;
}
if (i == dev->host_id[0]) {
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[0]);
continue;
}
tmport = wkport + 0x5b;
outb(0x01, tmport);
tmport = wkport + 0x41;
outb(0x08, tmport++);
outb(0x7f, tmport++);
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
j = i;
if ((j & 0x08) != 0) {
j = (j & 0x07) | 0x40;
}
outb(j, tmport);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
dev->active_id[0] |= m;
tmport = wkport + 0x50;
outb(0x30, tmport);
tmport = wkport + 0x54;
outb(0x00, tmport);
phase_cmd:
tmport = wkport + 0x58;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
tmport = wkport + 0x50;
outb(0x41, tmport);
goto phase_cmd;
}
sel_ok:
tmport = wkport + 0x43;
outb(inqd[0], tmport++);
outb(inqd[1], tmport++);
outb(inqd[2], tmport++);
outb(inqd[3], tmport++);
outb(inqd[4], tmport++);
outb(inqd[5], tmport);
tmport += 0x07;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(inqd[6], tmport++);
outb(inqd[7], tmport++);
tmport += 0x03;
outb(inqd[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
tmport = wkport + 0x5b;
outb(0x00, tmport);
tmport = wkport + 0x58;
outb(0x08, tmport);
tmport += 0x07;
j = 0;
rd_inq_data:
k = inb(tmport);
if ((k & 0x01) != 0) {
tmport -= 0x06;
mbuf[j++] = inb(tmport);
tmport += 0x06;
goto rd_inq_data;
}
if ((k & 0x80) == 0) {
goto rd_inq_data;
}
tmport -= 0x08;
j = inb(tmport);
if (j == 0x16) {
goto inq_ok;
}
tmport = wkport + 0x50;
outb(0x46, tmport);
tmport += 0x02;
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
tmport += 0x03;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x16)
goto sel_ok;
inq_ok:
mbuf[36] = 0;
printk(KERN_INFO " ID: %2d %s\n", i, &mbuf[8]);
dev->id[0][i].devtype = mbuf[0];
rmb = mbuf[1];
n = mbuf[7];
if ((mbuf[7] & 0x60) == 0) {
goto not_wide;
}
if ((i < 8) && ((dev->global_map[0] & 0x20) == 0)) {
goto not_wide;
}
if (lvdmode == 0) {
goto chg_wide;
}
if (dev->sp[0][i] != 0x04) // force u2
{
goto chg_wide;
}
tmport = wkport + 0x5b;
outb(0x01, tmport);
tmport = wkport + 0x43;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
try_u3:
j = 0;
tmport = wkport + 0x54;
outb(0x09, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(u3[j++], tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
if (j == 0x0a) {
goto u3p_cmd;
}
if (j == 0x0e) {
goto try_u3;
}
continue;
u3p_out:
tmport = wkport + 0x58;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(0, tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
if (j == 0x0a) {
goto u3p_cmd;
}
if (j == 0x0e) {
goto u3p_out;
}
continue;
u3p_in:
tmport = wkport + 0x54;
outb(0x09, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
u3p_in1:
j = inb(tmport);
if ((j & 0x01) != 0) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto u3p_in1;
}
if ((j & 0x80) == 0x00) {
goto u3p_in1;
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
if (j == 0x0a) {
goto u3p_cmd;
}
if (j == 0x0e) {
goto u3p_out;
}
continue;
u3p_cmd:
tmport = wkport + 0x50;
outb(0x30, tmport);
tmport = wkport + 0x54;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
if (j == 0x4e) {
goto u3p_out;
}
continue;
}
if (mbuf[0] != 0x01) {
goto chg_wide;
}
if (mbuf[1] != 0x06) {
goto chg_wide;
}
if (mbuf[2] != 0x04) {
goto chg_wide;
}
if (mbuf[3] == 0x09) {
m = 1;
m = m << i;
dev->wide_id[0] |= m;
dev->id[0][i].devsp = 0xce;
continue;
}
chg_wide:
tmport = wkport + 0x5b;
outb(0x01, tmport);
tmport = wkport + 0x43;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
continue;
while (inb(tmport) != 0x8e)
cpu_relax();
try_wide:
j = 0;
tmport = wkport + 0x54;
outb(0x05, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(wide[j++], tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto try_wide;
}
continue;
widep_out:
tmport = wkport + 0x58;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(0, tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto widep_out;
}
continue;
widep_in:
tmport = wkport + 0x54;
outb(0xff, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
widep_in1:
j = inb(tmport);
if ((j & 0x01) != 0) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto widep_in1;
}
if ((j & 0x80) == 0x00) {
goto widep_in1;
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto widep_out;
}
continue;
widep_cmd:
tmport = wkport + 0x50;
outb(0x30, tmport);
tmport = wkport + 0x54;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
if (j == 0x4e) {
goto widep_out;
}
continue;
}
if (mbuf[0] != 0x01) {
goto not_wide;
}
if (mbuf[1] != 0x02) {
goto not_wide;
}
if (mbuf[2] != 0x03) {
goto not_wide;
}
if (mbuf[3] != 0x01) {
goto not_wide;
}
m = 1;
m = m << i;
dev->wide_id[0] |= m;
not_wide:
if ((dev->id[0][i].devtype == 0x00) || (dev->id[0][i].devtype == 0x07) || ((dev->id[0][i].devtype == 0x05) && ((n & 0x10) != 0))) {
m = 1;
m = m << i;
if ((dev->async[0] & m) != 0) {
goto set_sync;
}
}
continue;
set_sync:
if (dev->sp[0][i] == 0x02) {
synu[4] = 0x0c;
synuw[4] = 0x0c;
} else {
if (dev->sp[0][i] >= 0x03) {
synu[4] = 0x0a;
synuw[4] = 0x0a;
}
}
tmport = wkport + 0x5b;
j = 0;
if ((m & dev->wide_id[0]) != 0) {
j |= 0x01;
}
outb(j, tmport);
tmport = wkport + 0x43;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[0][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
continue;
}
while (inb(tmport) != 0x8e)
cpu_relax();
try_sync:
j = 0;
tmport = wkport + 0x54;
outb(0x06, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
if ((m & dev->wide_id[0]) != 0) {
if ((m & dev->ultra_map[0]) != 0) {
outb(synuw[j++], tmport);
} else {
outb(synw[j++], tmport);
}
} else {
if ((m & dev->ultra_map[0]) != 0) {
outb(synu[j++], tmport);
} else {
outb(synn[j++], tmport);
}
}
tmport += 0x06;
}
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto try_sync;
}
continue;
phase_outs:
tmport = wkport + 0x58;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00) {
if ((inb(tmport) & 0x01) != 0x00) {
tmport -= 0x06;
outb(0x00, tmport);
tmport += 0x06;
}
}
tmport -= 0x08;
j = inb(tmport);
if (j == 0x85) {
goto tar_dcons;
}
j &= 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto phase_outs;
}
continue;
phase_ins:
tmport = wkport + 0x54;
outb(0x06, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
phase_ins1:
j = inb(tmport);
if ((j & 0x01) != 0x00) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto phase_ins1;
}
if ((j & 0x80) == 0x00) {
goto phase_ins1;
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport);
if (j == 0x85) {
goto tar_dcons;
}
j &= 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto phase_outs;
}
continue;
phase_cmds:
tmport = wkport + 0x50;
outb(0x30, tmport);
tar_dcons:
tmport = wkport + 0x54;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
continue;
}
if (mbuf[0] != 0x01) {
continue;
}
if (mbuf[1] != 0x03) {
continue;
}
if (mbuf[4] == 0x00) {
continue;
}
if (mbuf[3] > 0x64) {
continue;
}
if (mbuf[4] > 0x0e) {
mbuf[4] = 0x0e;
}
dev->id[0][i].devsp = mbuf[4];
if (mbuf[3] < 0x0c) {
j = 0xb0;
goto set_syn_ok;
}
if ((mbuf[3] < 0x0d) && (rmb == 0)) {
j = 0xa0;
goto set_syn_ok;
}
if (mbuf[3] < 0x1a) {
j = 0x20;
goto set_syn_ok;
}
if (mbuf[3] < 0x33) {
j = 0x40;
goto set_syn_ok;
}
if (mbuf[3] < 0x4c) {
j = 0x50;
goto set_syn_ok;
}
j = 0x60;
set_syn_ok:
dev->id[0][i].devsp = (dev->id[0][i].devsp & 0x0f) | j;
}
}
static void atp870u_free_tables(struct Scsi_Host *host)
{
struct atp_unit *atp_dev = (struct atp_unit *)&host->hostdata;
int j, k;
for (j=0; j < 2; j++) {
for (k = 0; k < 16; k++) {
if (!atp_dev->id[j][k].prd_table)
continue;
[SCSI] atp870u: fix memory addressing bug From: Alan Cox <alan@redhat.com> The virt_to_bus() wasn't correctly taken out of this driver. It needs to be able to track both physical and virtual addresses for its prd table. Update the driver to do this with separate tracking entries. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-15 21:59:36 +08:00
pci_free_consistent(atp_dev->pdev, 1024, atp_dev->id[j][k].prd_table, atp_dev->id[j][k].prd_bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atp_dev->id[j][k].prd_table = NULL;
}
}
}
static int atp870u_init_tables(struct Scsi_Host *host)
{
struct atp_unit *atp_dev = (struct atp_unit *)&host->hostdata;
int c,k;
for(c=0;c < 2;c++) {
for(k=0;k<16;k++) {
[SCSI] atp870u: fix memory addressing bug From: Alan Cox <alan@redhat.com> The virt_to_bus() wasn't correctly taken out of this driver. It needs to be able to track both physical and virtual addresses for its prd table. Update the driver to do this with separate tracking entries. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-15 21:59:36 +08:00
atp_dev->id[c][k].prd_table = pci_alloc_consistent(atp_dev->pdev, 1024, &(atp_dev->id[c][k].prd_bus));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!atp_dev->id[c][k].prd_table) {
printk("atp870u_init_tables fail\n");
atp870u_free_tables(host);
return -ENOMEM;
}
[SCSI] atp870u: fix memory addressing bug From: Alan Cox <alan@redhat.com> The virt_to_bus() wasn't correctly taken out of this driver. It needs to be able to track both physical and virtual addresses for its prd table. Update the driver to do this with separate tracking entries. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-15 21:59:36 +08:00
atp_dev->id[c][k].prdaddr = atp_dev->id[c][k].prd_bus;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atp_dev->id[c][k].devsp=0x20;
atp_dev->id[c][k].devtype = 0x7f;
atp_dev->id[c][k].curr_req = NULL;
}
atp_dev->active_id[c] = 0;
atp_dev->wide_id[c] = 0;
atp_dev->host_id[c] = 0x07;
atp_dev->quhd[c] = 0;
atp_dev->quend[c] = 0;
atp_dev->last_cmd[c] = 0xff;
atp_dev->in_snd[c] = 0;
atp_dev->in_int[c] = 0;
for (k = 0; k < qcnt; k++) {
atp_dev->quereq[c][k] = NULL;
}
for (k = 0; k < 16; k++) {
atp_dev->id[c][k].curr_req = NULL;
atp_dev->sp[c][k] = 0x04;
}
}
return 0;
}
/* return non-zero on detection */
static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
unsigned char k, m, c;
unsigned long flags;
unsigned int base_io, tmport, error,n;
unsigned char host_id;
struct Scsi_Host *shpnt = NULL;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
struct atp_unit *atpdev, *p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned char setupdata[2][16];
int count = 0;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev = kzalloc(sizeof(*atpdev), GFP_KERNEL);
if (!atpdev)
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (pci_enable_device(pdev))
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
goto err_eio;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] Replace 0xff.. with correct DMA_xBIT_MASK Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 17:56:48 +08:00
if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
} else {
printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
goto err_eio;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* It's probably easier to weed out some revisions like
* this than via the PCI device table
*/
if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610) {
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver);
if (atpdev->chip_ver < 2)
goto err_eio;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
switch (ent->device) {
case PCI_DEVICE_ID_ARTOP_AEC7612UW:
case PCI_DEVICE_ID_ARTOP_AEC7612SUW:
case ATP880_DEVID1:
case ATP880_DEVID2:
case ATP885_DEVID:
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->chip_ver = 0x04;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default:
break;
}
base_io = pci_resource_start(pdev, 0);
base_io &= 0xfffffff8;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) {
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803
host_id = inb(base_io + 0x39);
host_id >>= 0x04;
printk(KERN_INFO " ACARD AEC-67160 PCI Ultra3 LVD Host Adapter: %d"
" IO:%x, IRQ:%d.\n", count, base_io, pdev->irq);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->ioport[0] = base_io + 0x40;
atpdev->pciport[0] = base_io + 0x28;
atpdev->dev_id = ent->device;
atpdev->host_id[0] = host_id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tmport = base_io + 0x22;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->scam_on = inb(tmport);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tmport += 0x13;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->global_map[0] = inb(tmport);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tmport += 0x07;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->ultra_map[0] = inw(tmport);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
n = 0x3f09;
next_fblk_880:
if (n >= 0x4000)
goto flash_ok_880;
m = 0;
outw(n, base_io + 0x34);
n += 0x0002;
if (inb(base_io + 0x30) == 0xff)
goto flash_ok_880;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->sp[0][m++] = inb(base_io + 0x30);
atpdev->sp[0][m++] = inb(base_io + 0x31);
atpdev->sp[0][m++] = inb(base_io + 0x32);
atpdev->sp[0][m++] = inb(base_io + 0x33);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outw(n, base_io + 0x34);
n += 0x0002;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->sp[0][m++] = inb(base_io + 0x30);
atpdev->sp[0][m++] = inb(base_io + 0x31);
atpdev->sp[0][m++] = inb(base_io + 0x32);
atpdev->sp[0][m++] = inb(base_io + 0x33);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outw(n, base_io + 0x34);
n += 0x0002;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->sp[0][m++] = inb(base_io + 0x30);
atpdev->sp[0][m++] = inb(base_io + 0x31);
atpdev->sp[0][m++] = inb(base_io + 0x32);
atpdev->sp[0][m++] = inb(base_io + 0x33);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outw(n, base_io + 0x34);
n += 0x0002;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->sp[0][m++] = inb(base_io + 0x30);
atpdev->sp[0][m++] = inb(base_io + 0x31);
atpdev->sp[0][m++] = inb(base_io + 0x32);
atpdev->sp[0][m++] = inb(base_io + 0x33);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
n += 0x0018;
goto next_fblk_880;
flash_ok_880:
outw(0, base_io + 0x34);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->ultra_map[0] = 0;
atpdev->async[0] = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (k = 0; k < 16; k++) {
n = 1;
n = n << k;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
if (atpdev->sp[0][k] > 1) {
atpdev->ultra_map[0] |= n;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
if (atpdev->sp[0][k] == 0)
atpdev->async[0] |= n;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->async[0] = ~(atpdev->async[0]);
outb(atpdev->global_map[0], base_io + 0x35);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
if (!shpnt)
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
goto err_nomem;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
p = (struct atp_unit *)&shpnt->hostdata;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->host = shpnt;
atpdev->pdev = pdev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_set_drvdata(pdev, p);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
memcpy(p, atpdev, sizeof(*atpdev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (atp870u_init_tables(shpnt) < 0) {
printk(KERN_ERR "Unable to allocate tables for Acard controller\n");
goto unregister;
}
[PATCH] irq-flags: scsi: Use the new IRQF_ constants Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 10:29:42 +08:00
if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp880i", shpnt)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
goto free_tables;
}
spin_lock_irqsave(shpnt->host_lock, flags);
tmport = base_io + 0x38;
k = inb(tmport) & 0x80;
outb(k, tmport);
tmport += 0x03;
outb(0x20, tmport);
mdelay(32);
outb(0, tmport);
mdelay(32);
tmport = base_io + 0x5b;
inb(tmport);
tmport -= 0x04;
inb(tmport);
tmport = base_io + 0x40;
outb((host_id | 0x08), tmport);
tmport += 0x18;
outb(0, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0)
mdelay(1);
tmport -= 0x08;
inb(tmport);
tmport = base_io + 0x41;
outb(8, tmport++);
outb(0x7f, tmport);
tmport = base_io + 0x51;
outb(0x20, tmport);
tscam(shpnt);
is880(p, base_io);
tmport = base_io + 0x38;
outb(0xb0, tmport);
shpnt->max_id = 16;
shpnt->this_id = host_id;
shpnt->unique_id = base_io;
shpnt->io_port = base_io;
shpnt->n_io_port = 0x60; /* Number of bytes of I/O space used */
shpnt->irq = pdev->irq;
} else if (ent->device == ATP885_DEVID) {
printk(KERN_INFO " ACARD AEC-67162 PCI Ultra3 LVD Host Adapter: IO:%x, IRQ:%d.\n"
, base_io, pdev->irq);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->pdev = pdev;
atpdev->dev_id = ent->device;
atpdev->baseport = base_io;
atpdev->ioport[0] = base_io + 0x80;
atpdev->ioport[1] = base_io + 0xc0;
atpdev->pciport[0] = base_io + 0x40;
atpdev->pciport[1] = base_io + 0x50;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
if (!shpnt)
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
goto err_nomem;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
p = (struct atp_unit *)&shpnt->hostdata;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->host = shpnt;
atpdev->pdev = pdev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_set_drvdata(pdev, p);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
memcpy(p, atpdev, sizeof(struct atp_unit));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (atp870u_init_tables(shpnt) < 0)
goto unregister;
#ifdef ED_DBGP
printk("request_irq() shpnt %p hostdata %p\n", shpnt, p);
#endif
[PATCH] irq-flags: scsi: Use the new IRQF_ constants Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 10:29:42 +08:00
if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870u", shpnt)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR "Unable to allocate IRQ for Acard controller.\n");
goto free_tables;
}
spin_lock_irqsave(shpnt->host_lock, flags);
c=inb(base_io + 0x29);
outb((c | 0x04),base_io + 0x29);
n=0x1f80;
next_fblk_885:
if (n >= 0x2000) {
goto flash_ok_885;
}
outw(n,base_io + 0x3c);
if (inl(base_io + 0x38) == 0xffffffff) {
goto flash_ok_885;
}
for (m=0; m < 2; m++) {
p->global_map[m]= 0;
for (k=0; k < 4; k++) {
outw(n++,base_io + 0x3c);
((unsigned long *)&setupdata[m][0])[k]=inl(base_io + 0x38);
}
for (k=0; k < 4; k++) {
outw(n++,base_io + 0x3c);
((unsigned long *)&p->sp[m][0])[k]=inl(base_io + 0x38);
}
n += 8;
}
goto next_fblk_885;
flash_ok_885:
#ifdef ED_DBGP
printk( "Flash Read OK\n");
#endif
c=inb(base_io + 0x29);
outb((c & 0xfb),base_io + 0x29);
for (c=0;c < 2;c++) {
p->ultra_map[c]=0;
p->async[c] = 0;
for (k=0; k < 16; k++) {
n=1;
n = n << k;
if (p->sp[c][k] > 1) {
p->ultra_map[c] |= n;
} else {
if (p->sp[c][k] == 0) {
p->async[c] |= n;
}
}
}
p->async[c] = ~(p->async[c]);
if (p->global_map[c] == 0) {
k=setupdata[c][1];
if ((k & 0x40) != 0)
p->global_map[c] |= 0x20;
k &= 0x07;
p->global_map[c] |= k;
if ((setupdata[c][2] & 0x04) != 0)
p->global_map[c] |= 0x08;
p->host_id[c] = setupdata[c][0] & 0x07;
}
}
k = inb(base_io + 0x28) & 0x8f;
k |= 0x10;
outb(k, base_io + 0x28);
outb(0x80, base_io + 0x41);
outb(0x80, base_io + 0x51);
mdelay(100);
outb(0, base_io + 0x41);
outb(0, base_io + 0x51);
mdelay(1000);
inb(base_io + 0x9b);
inb(base_io + 0x97);
inb(base_io + 0xdb);
inb(base_io + 0xd7);
tmport = base_io + 0x80;
k=p->host_id[0];
if (k > 7)
k = (k & 0x07) | 0x40;
k |= 0x08;
outb(k, tmport);
tmport += 0x18;
outb(0, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0)
cpu_relax();
tmport -= 0x08;
inb(tmport);
tmport = base_io + 0x81;
outb(8, tmport++);
outb(0x7f, tmport);
tmport = base_io + 0x91;
outb(0x20, tmport);
tmport = base_io + 0xc0;
k=p->host_id[1];
if (k > 7)
k = (k & 0x07) | 0x40;
k |= 0x08;
outb(k, tmport);
tmport += 0x18;
outb(0, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0)
cpu_relax();
tmport -= 0x08;
inb(tmport);
tmport = base_io + 0xc1;
outb(8, tmport++);
outb(0x7f, tmport);
tmport = base_io + 0xd1;
outb(0x20, tmport);
tscam_885();
printk(KERN_INFO " Scanning Channel A SCSI Device ...\n");
is885(p, base_io + 0x80, 0);
printk(KERN_INFO " Scanning Channel B SCSI Device ...\n");
is885(p, base_io + 0xc0, 1);
k = inb(base_io + 0x28) & 0xcf;
k |= 0xc0;
outb(k, base_io + 0x28);
k = inb(base_io + 0x1f) | 0x80;
outb(k, base_io + 0x1f);
k = inb(base_io + 0x29) | 0x01;
outb(k, base_io + 0x29);
#ifdef ED_DBGP
//printk("atp885: atp_host[0] 0x%p\n", atp_host[0]);
#endif
shpnt->max_id = 16;
shpnt->max_lun = (p->global_map[0] & 0x07) + 1;
shpnt->max_channel = 1;
shpnt->this_id = p->host_id[0];
shpnt->unique_id = base_io;
shpnt->io_port = base_io;
shpnt->n_io_port = 0xff; /* Number of bytes of I/O space used */
shpnt->irq = pdev->irq;
} else {
error = pci_read_config_byte(pdev, 0x49, &host_id);
printk(KERN_INFO " ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host Adapter: %d "
"IO:%x, IRQ:%d.\n", count, base_io, pdev->irq);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->ioport[0] = base_io;
atpdev->pciport[0] = base_io + 0x20;
atpdev->dev_id = ent->device;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
host_id &= 0x07;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->host_id[0] = host_id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tmport = base_io + 0x22;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->scam_on = inb(tmport);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tmport += 0x0b;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->global_map[0] = inb(tmport++);
atpdev->ultra_map[0] = inw(tmport);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
if (atpdev->ultra_map[0] == 0) {
atpdev->scam_on = 0x00;
atpdev->global_map[0] = 0x20;
atpdev->ultra_map[0] = 0xffff;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
if (!shpnt)
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
goto err_nomem;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
p = (struct atp_unit *)&shpnt->hostdata;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
atpdev->host = shpnt;
atpdev->pdev = pdev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_set_drvdata(pdev, p);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
memcpy(p, atpdev, sizeof(*atpdev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (atp870u_init_tables(shpnt) < 0)
goto unregister;
[PATCH] irq-flags: scsi: Use the new IRQF_ constants Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 10:29:42 +08:00
if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870i", shpnt)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
goto free_tables;
}
spin_lock_irqsave(shpnt->host_lock, flags);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
if (atpdev->chip_ver > 0x07) { /* check if atp876 chip then enable terminator */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tmport = base_io + 0x3e;
outb(0x00, tmport);
}
tmport = base_io + 0x3a;
k = (inb(tmport) & 0xf3) | 0x10;
outb(k, tmport);
outb((k & 0xdf), tmport);
mdelay(32);
outb(k, tmport);
mdelay(32);
tmport = base_io;
outb((host_id | 0x08), tmport);
tmport += 0x18;
outb(0, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0)
mdelay(1);
tmport -= 0x08;
inb(tmport);
tmport = base_io + 1;
outb(8, tmport++);
outb(0x7f, tmport);
tmport = base_io + 0x11;
outb(0x20, tmport);
tscam(shpnt);
is870(p, base_io);
tmport = base_io + 0x3a;
outb((inb(tmport) & 0xef), tmport);
tmport++;
outb((inb(tmport) | 0x20), tmport);
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
if (atpdev->chip_ver == 4)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
shpnt->max_id = 16;
else
[SCSI] audit drivers for incorrect max_id use max_id now means the maximum number of ids on the bus, which means it is one greater than the largest possible id number. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-23 16:29:28 +08:00
shpnt->max_id = 8;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
shpnt->this_id = host_id;
shpnt->unique_id = base_io;
shpnt->io_port = base_io;
shpnt->n_io_port = 0x40; /* Number of bytes of I/O space used */
shpnt->irq = pdev->irq;
}
spin_unlock_irqrestore(shpnt->host_lock, flags);
if(ent->device==ATP885_DEVID) {
if(!request_region(base_io, 0xff, "atp870u")) /* Register the IO ports that we use */
goto request_io_fail;
} else if((ent->device==ATP880_DEVID1)||(ent->device==ATP880_DEVID2)) {
if(!request_region(base_io, 0x60, "atp870u")) /* Register the IO ports that we use */
goto request_io_fail;
} else {
if(!request_region(base_io, 0x40, "atp870u")) /* Register the IO ports that we use */
goto request_io_fail;
}
count++;
if (scsi_add_host(shpnt, &pdev->dev))
goto scsi_add_fail;
scsi_scan_host(shpnt);
#ifdef ED_DBGP
printk("atp870u_prob : exit\n");
#endif
return 0;
scsi_add_fail:
printk("atp870u_prob:scsi_add_fail\n");
if(ent->device==ATP885_DEVID) {
release_region(base_io, 0xff);
} else if((ent->device==ATP880_DEVID1)||(ent->device==ATP880_DEVID2)) {
release_region(base_io, 0x60);
} else {
release_region(base_io, 0x40);
}
request_io_fail:
printk("atp870u_prob:request_io_fail\n");
free_irq(pdev->irq, shpnt);
free_tables:
printk("atp870u_prob:free_table\n");
atp870u_free_tables(shpnt);
unregister:
printk("atp870u_prob:unregister\n");
scsi_host_put(shpnt);
return -1;
[SCSI] atp870u: reduce huge stack usage The atp870u driver is the largest stack eater reported by checkstack (on x86_864, allmodconfig). This converts the offending function to kmalloc+kfree struct atp_unit instead of allocating it on the stack. Was: 0x0000164c atp870u_probe [atp870u]: 3176 Now: 0x0000164c atp870u_probe [atp870u]: 408 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 13:01:28 +08:00
err_eio:
kfree(atpdev);
return -EIO;
err_nomem:
kfree(atpdev);
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* The abort command does not leave the device in a clean state where
it is available to be used again. Until this gets worked out, we will
leave it commented out. */
static int atp870u_abort(struct scsi_cmnd * SCpnt)
{
unsigned char j, k, c;
struct scsi_cmnd *workrequ;
unsigned int tmport;
struct atp_unit *dev;
struct Scsi_Host *host;
host = SCpnt->device->host;
dev = (struct atp_unit *)&host->hostdata;
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 06:05:09 +08:00
c = scmd_channel(SCpnt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(" atp870u: abort Channel = %x \n", c);
printk("working=%x last_cmd=%x ", dev->working[c], dev->last_cmd[c]);
printk(" quhdu=%x quendu=%x ", dev->quhd[c], dev->quend[c]);
tmport = dev->ioport[c];
for (j = 0; j < 0x18; j++) {
printk(" r%2x=%2x", j, inb(tmport++));
}
tmport += 0x04;
printk(" r1c=%2x", inb(tmport));
tmport += 0x03;
printk(" r1f=%2x in_snd=%2x ", inb(tmport), dev->in_snd[c]);
tmport= dev->pciport[c];
printk(" d00=%2x", inb(tmport));
tmport += 0x02;
printk(" d02=%2x", inb(tmport));
for(j=0;j<16;j++) {
if (dev->id[c][j].curr_req != NULL) {
workrequ = dev->id[c][j].curr_req;
printk("\n que cdb= ");
for (k=0; k < workrequ->cmd_len; k++) {
printk(" %2x ",workrequ->cmnd[k]);
}
printk(" last_lenu= %x ",(unsigned int)dev->id[c][j].last_len);
}
}
return SUCCESS;
}
static const char *atp870u_info(struct Scsi_Host *notused)
{
static char buffer[128];
strcpy(buffer, "ACARD AEC-6710/6712/67160 PCI Ultra/W/LVD SCSI-3 Adapter Driver V2.6+ac ");
return buffer;
}
#define BLS buffer + len + size
[SCSI] drivers/scsi/atp870u.c: make a function static This patch makes a needlessly global function static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-24 15:34:17 +08:00
static int atp870u_proc_info(struct Scsi_Host *HBAptr, char *buffer,
char **start, off_t offset, int length, int inout)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
static u8 buff[512];
int size = 0;
int len = 0;
off_t begin = 0;
off_t pos = 0;
if (inout)
return -EINVAL;
if (offset == 0)
memset(buff, 0, sizeof(buff));
size += sprintf(BLS, "ACARD AEC-671X Driver Version: 2.6+ac\n");
len += size;
pos = begin + len;
size = 0;
size += sprintf(BLS, "\n");
size += sprintf(BLS, "Adapter Configuration:\n");
size += sprintf(BLS, " Base IO: %#.4lx\n", HBAptr->io_port);
size += sprintf(BLS, " IRQ: %d\n", HBAptr->irq);
len += size;
pos = begin + len;
*start = buffer + (offset - begin); /* Start of wanted data */
len -= (offset - begin); /* Start slop */
if (len > length) {
len = length; /* Ending slop */
}
return (len);
}
static int atp870u_biosparam(struct scsi_device *disk, struct block_device *dev,
sector_t capacity, int *ip)
{
int heads, sectors, cylinders;
heads = 64;
sectors = 32;
cylinders = (unsigned long)capacity / (heads * sectors);
if (cylinders > 1024) {
heads = 255;
sectors = 63;
cylinders = (unsigned long)capacity / (heads * sectors);
}
ip[0] = heads;
ip[1] = sectors;
ip[2] = cylinders;
return 0;
}
static void atp870u_remove (struct pci_dev *pdev)
{
struct atp_unit *devext = pci_get_drvdata(pdev);
struct Scsi_Host *pshost = devext->host;
scsi_remove_host(pshost);
printk(KERN_INFO "free_irq : %d\n",pshost->irq);
free_irq(pshost->irq, pshost);
release_region(pshost->io_port, pshost->n_io_port);
printk(KERN_INFO "atp870u_free_tables : %p\n",pshost);
atp870u_free_tables(pshost);
printk(KERN_INFO "scsi_host_put : %p\n",pshost);
scsi_host_put(pshost);
printk(KERN_INFO "pci_set_drvdata : %p\n",pdev);
pci_set_drvdata(pdev, NULL);
}
MODULE_LICENSE("GPL");
static struct scsi_host_template atp870u_template = {
.module = THIS_MODULE,
.name = "atp870u" /* name */,
.proc_name = "atp870u",
.proc_info = atp870u_proc_info,
.info = atp870u_info /* info */,
.queuecommand = atp870u_queuecommand /* queuecommand */,
.eh_abort_handler = atp870u_abort /* abort */,
.bios_param = atp870u_biosparam /* biosparm */,
.can_queue = qcnt /* can_queue */,
.this_id = 7 /* SCSI ID */,
.sg_tablesize = ATP870U_SCATTER /*SG_ALL*/ /*SG_NONE*/,
.cmd_per_lun = ATP870U_CMDLUN /* commands per lun */,
.use_clustering = ENABLE_CLUSTERING,
.max_sectors = ATP870U_MAX_SECTORS,
};
static struct pci_device_id atp870u_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, ATP885_DEVID) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, ATP880_DEVID1) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, ATP880_DEVID2) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_AEC7610) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_AEC7612UW) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_AEC7612U) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_AEC7612S) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_AEC7612D) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_AEC7612SUW) },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_8060) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atp870u_id_table);
static struct pci_driver atp870u_driver = {
.id_table = atp870u_id_table,
.name = "atp870u",
.probe = atp870u_probe,
.remove = __devexit_p(atp870u_remove),
};
static int __init atp870u_init(void)
{
#ifdef ED_DBGP
printk("atp870u_init: Entry\n");
#endif
return pci_register_driver(&atp870u_driver);
}
static void __exit atp870u_exit(void)
{
#ifdef ED_DBGP
printk("atp870u_exit: Entry\n");
#endif
pci_unregister_driver(&atp870u_driver);
}
static void tscam_885(void)
{
unsigned char i;
for (i = 0; i < 0x2; i++) {
mdelay(300);
}
return;
}
static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c)
{
unsigned int tmport;
unsigned char i, j, k, rmb, n, lvdmode;
unsigned short int m;
static unsigned char mbuf[512];
static unsigned char satn[9] = {0, 0, 0, 0, 0, 0, 0, 6, 6};
static unsigned char inqd[9] = {0x12, 0, 0, 0, 0x24, 0, 0, 0x24, 6};
static unsigned char synn[6] = {0x80, 1, 3, 1, 0x19, 0x0e};
unsigned char synu[6] = {0x80, 1, 3, 1, 0x0a, 0x0e};
static unsigned char synw[6] = {0x80, 1, 3, 1, 0x19, 0x0e};
unsigned char synuw[6] = {0x80, 1, 3, 1, 0x0a, 0x0e};
static unsigned char wide[6] = {0x80, 1, 2, 3, 1, 0};
static unsigned char u3[9] = { 0x80,1,6,4,0x09,00,0x0e,0x01,0x02 };
lvdmode=inb(wkport + 0x1b) >> 7;
for (i = 0; i < 16; i++) {
m = 1;
m = m << i;
if ((m & dev->active_id[c]) != 0) {
continue;
}
if (i == dev->host_id[c]) {
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[c]);
continue;
}
tmport = wkport + 0x1b;
outb(0x01, tmport);
tmport = wkport + 0x01;
outb(0x08, tmport++);
outb(0x7f, tmport++);
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[c][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
j = i;
if ((j & 0x08) != 0) {
j = (j & 0x07) | 0x40;
}
outb(j, tmport);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
continue;
}
while (inb(tmport) != 0x8e)
cpu_relax();
dev->active_id[c] |= m;
tmport = wkport + 0x10;
outb(0x30, tmport);
tmport = wkport + 0x14;
outb(0x00, tmport);
phase_cmd:
tmport = wkport + 0x18;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
tmport = wkport + 0x10;
outb(0x41, tmport);
goto phase_cmd;
}
sel_ok:
tmport = wkport + 0x03;
outb(inqd[0], tmport++);
outb(inqd[1], tmport++);
outb(inqd[2], tmport++);
outb(inqd[3], tmport++);
outb(inqd[4], tmport++);
outb(inqd[5], tmport);
tmport += 0x07;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[c][i].devsp, tmport++);
outb(0, tmport++);
outb(inqd[6], tmport++);
outb(inqd[7], tmport++);
tmport += 0x03;
outb(inqd[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
continue;
}
while (inb(tmport) != 0x8e)
cpu_relax();
tmport = wkport + 0x1b;
outb(0x00, tmport);
tmport = wkport + 0x18;
outb(0x08, tmport);
tmport += 0x07;
j = 0;
rd_inq_data:
k = inb(tmport);
if ((k & 0x01) != 0) {
tmport -= 0x06;
mbuf[j++] = inb(tmport);
tmport += 0x06;
goto rd_inq_data;
}
if ((k & 0x80) == 0) {
goto rd_inq_data;
}
tmport -= 0x08;
j = inb(tmport);
if (j == 0x16) {
goto inq_ok;
}
tmport = wkport + 0x10;
outb(0x46, tmport);
tmport += 0x02;
outb(0, tmport++);
outb(0, tmport++);
outb(0, tmport++);
tmport += 0x03;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if (inb(tmport) != 0x16) {
goto sel_ok;
}
inq_ok:
mbuf[36] = 0;
printk( KERN_INFO" ID: %2d %s\n", i, &mbuf[8]);
dev->id[c][i].devtype = mbuf[0];
rmb = mbuf[1];
n = mbuf[7];
if ((mbuf[7] & 0x60) == 0) {
goto not_wide;
}
if ((i < 8) && ((dev->global_map[c] & 0x20) == 0)) {
goto not_wide;
}
if (lvdmode == 0) {
goto chg_wide;
}
if (dev->sp[c][i] != 0x04) { // force u2
goto chg_wide;
}
tmport = wkport + 0x1b;
outb(0x01, tmport);
tmport = wkport + 0x03;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[c][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
continue;
}
while (inb(tmport) != 0x8e)
cpu_relax();
try_u3:
j = 0;
tmport = wkport + 0x14;
outb(0x09, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(u3[j++], tmport);
tmport += 0x06;
}
cpu_relax();
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
if (j == 0x0a) {
goto u3p_cmd;
}
if (j == 0x0e) {
goto try_u3;
}
continue;
u3p_out:
tmport = wkport + 0x18;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(0, tmport);
tmport += 0x06;
}
cpu_relax();
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
if (j == 0x0a) {
goto u3p_cmd;
}
if (j == 0x0e) {
goto u3p_out;
}
continue;
u3p_in:
tmport = wkport + 0x14;
outb(0x09, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
u3p_in1:
j = inb(tmport);
if ((j & 0x01) != 0) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto u3p_in1;
}
if ((j & 0x80) == 0x00) {
goto u3p_in1;
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
if (j == 0x0a) {
goto u3p_cmd;
}
if (j == 0x0e) {
goto u3p_out;
}
continue;
u3p_cmd:
tmport = wkport + 0x10;
outb(0x30, tmport);
tmport = wkport + 0x14;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00);
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
if (j == 0x4e) {
goto u3p_out;
}
continue;
}
if (mbuf[0] != 0x01) {
goto chg_wide;
}
if (mbuf[1] != 0x06) {
goto chg_wide;
}
if (mbuf[2] != 0x04) {
goto chg_wide;
}
if (mbuf[3] == 0x09) {
m = 1;
m = m << i;
dev->wide_id[c] |= m;
dev->id[c][i].devsp = 0xce;
#ifdef ED_DBGP
printk("dev->id[%2d][%2d].devsp = %2x\n",c,i,dev->id[c][i].devsp);
#endif
continue;
}
chg_wide:
tmport = wkport + 0x1b;
outb(0x01, tmport);
tmport = wkport + 0x03;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[c][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
continue;
}
while (inb(tmport) != 0x8e)
cpu_relax();
try_wide:
j = 0;
tmport = wkport + 0x14;
outb(0x05, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(wide[j++], tmport);
tmport += 0x06;
}
cpu_relax();
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto try_wide;
}
continue;
widep_out:
tmport = wkport + 0x18;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
outb(0, tmport);
tmport += 0x06;
}
cpu_relax();
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto widep_out;
}
continue;
widep_in:
tmport = wkport + 0x14;
outb(0xff, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
widep_in1:
j = inb(tmport);
if ((j & 0x01) != 0) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto widep_in1;
}
if ((j & 0x80) == 0x00) {
goto widep_in1;
}
tmport -= 0x08;
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
if (j == 0x0a) {
goto widep_cmd;
}
if (j == 0x0e) {
goto widep_out;
}
continue;
widep_cmd:
tmport = wkport + 0x10;
outb(0x30, tmport);
tmport = wkport + 0x14;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
if (j == 0x4e) {
goto widep_out;
}
continue;
}
if (mbuf[0] != 0x01) {
goto not_wide;
}
if (mbuf[1] != 0x02) {
goto not_wide;
}
if (mbuf[2] != 0x03) {
goto not_wide;
}
if (mbuf[3] != 0x01) {
goto not_wide;
}
m = 1;
m = m << i;
dev->wide_id[c] |= m;
not_wide:
if ((dev->id[c][i].devtype == 0x00) || (dev->id[c][i].devtype == 0x07) ||
((dev->id[c][i].devtype == 0x05) && ((n & 0x10) != 0))) {
m = 1;
m = m << i;
if ((dev->async[c] & m) != 0) {
goto set_sync;
}
}
continue;
set_sync:
if (dev->sp[c][i] == 0x02) {
synu[4]=0x0c;
synuw[4]=0x0c;
} else {
if (dev->sp[c][i] >= 0x03) {
synu[4]=0x0a;
synuw[4]=0x0a;
}
}
tmport = wkport + 0x1b;
j = 0;
if ((m & dev->wide_id[c]) != 0) {
j |= 0x01;
}
outb(j, tmport);
tmport = wkport + 0x03;
outb(satn[0], tmport++);
outb(satn[1], tmport++);
outb(satn[2], tmport++);
outb(satn[3], tmport++);
outb(satn[4], tmport++);
outb(satn[5], tmport++);
tmport += 0x06;
outb(0, tmport);
tmport += 0x02;
outb(dev->id[c][i].devsp, tmport++);
outb(0, tmport++);
outb(satn[6], tmport++);
outb(satn[7], tmport++);
tmport += 0x03;
outb(satn[8], tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
continue;
}
while (inb(tmport) != 0x8e)
cpu_relax();
try_sync:
j = 0;
tmport = wkport + 0x14;
outb(0x06, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0) {
if ((inb(tmport) & 0x01) != 0) {
tmport -= 0x06;
if ((m & dev->wide_id[c]) != 0) {
if ((m & dev->ultra_map[c]) != 0) {
outb(synuw[j++], tmport);
} else {
outb(synw[j++], tmport);
}
} else {
if ((m & dev->ultra_map[c]) != 0) {
outb(synu[j++], tmport);
} else {
outb(synn[j++], tmport);
}
}
tmport += 0x06;
}
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
j = inb(tmport) & 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto try_sync;
}
continue;
phase_outs:
tmport = wkport + 0x18;
outb(0x20, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00) {
if ((inb(tmport) & 0x01) != 0x00) {
tmport -= 0x06;
outb(0x00, tmport);
tmport += 0x06;
}
cpu_relax();
}
tmport -= 0x08;
j = inb(tmport);
if (j == 0x85) {
goto tar_dcons;
}
j &= 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto phase_outs;
}
continue;
phase_ins:
tmport = wkport + 0x14;
outb(0x06, tmport);
tmport += 0x04;
outb(0x20, tmport);
tmport += 0x07;
k = 0;
phase_ins1:
j = inb(tmport);
if ((j & 0x01) != 0x00) {
tmport -= 0x06;
mbuf[k++] = inb(tmport);
tmport += 0x06;
goto phase_ins1;
}
if ((j & 0x80) == 0x00) {
goto phase_ins1;
}
tmport -= 0x08;
while ((inb(tmport) & 0x80) == 0x00);
j = inb(tmport);
if (j == 0x85) {
goto tar_dcons;
}
j &= 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
if (j == 0x0a) {
goto phase_cmds;
}
if (j == 0x0e) {
goto phase_outs;
}
continue;
phase_cmds:
tmport = wkport + 0x10;
outb(0x30, tmport);
tar_dcons:
tmport = wkport + 0x14;
outb(0x00, tmport);
tmport += 0x04;
outb(0x08, tmport);
tmport += 0x07;
while ((inb(tmport) & 0x80) == 0x00)
cpu_relax();
tmport -= 0x08;
j = inb(tmport);
if (j != 0x16) {
continue;
}
if (mbuf[0] != 0x01) {
continue;
}
if (mbuf[1] != 0x03) {
continue;
}
if (mbuf[4] == 0x00) {
continue;
}
if (mbuf[3] > 0x64) {
continue;
}
if (mbuf[4] > 0x0e) {
mbuf[4] = 0x0e;
}
dev->id[c][i].devsp = mbuf[4];
if (mbuf[3] < 0x0c){
j = 0xb0;
goto set_syn_ok;
}
if ((mbuf[3] < 0x0d) && (rmb == 0)) {
j = 0xa0;
goto set_syn_ok;
}
if (mbuf[3] < 0x1a) {
j = 0x20;
goto set_syn_ok;
}
if (mbuf[3] < 0x33) {
j = 0x40;
goto set_syn_ok;
}
if (mbuf[3] < 0x4c) {
j = 0x50;
goto set_syn_ok;
}
j = 0x60;
set_syn_ok:
dev->id[c][i].devsp = (dev->id[c][i].devsp & 0x0f) | j;
#ifdef ED_DBGP
printk("dev->id[%2d][%2d].devsp = %2x\n",c,i,dev->id[c][i].devsp);
#endif
}
tmport = wkport + 0x16;
outb(0x80, tmport);
}
module_init(atp870u_init);
module_exit(atp870u_exit);