2015-03-03 05:01:12 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2015 Broadcom
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* DOC: VC4 CRTC module
|
|
|
|
*
|
|
|
|
* In VC4, the Pixel Valve is what most closely corresponds to the
|
|
|
|
* DRM's concept of a CRTC. The PV generates video timings from the
|
|
|
|
* output's clock plus its configuration. It pulls scaled pixels from
|
|
|
|
* the HVS at that timing, and feeds it to the encoder.
|
|
|
|
*
|
|
|
|
* However, the DRM CRTC also collects the configuration of all the
|
|
|
|
* DRM planes attached to it. As a result, this file also manages
|
|
|
|
* setup of the VC4 HVS's display elements on the CRTC.
|
|
|
|
*
|
|
|
|
* The 2835 has 3 different pixel valves. pv0 in the audio power
|
|
|
|
* domain feeds DSI0 or DPI, while pv1 feeds DS1 or SMI. pv2 in the
|
|
|
|
* image domain can feed either HDMI or the SDTV controller. The
|
|
|
|
* pixel valve chooses from the CPRMAN clocks (HSM for HDMI, VEC for
|
|
|
|
* SDTV, etc.) according to which output type is chosen in the mux.
|
|
|
|
*
|
|
|
|
* For power management, the pixel valve's registers are all clocked
|
|
|
|
* by the AXI clock, while the timings and FIFOs make use of the
|
|
|
|
* output-specific clock. Since the encoders also directly consume
|
|
|
|
* the CPRMAN clocks, and know what timings they need, they are the
|
|
|
|
* ones that set the clock.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "drm_atomic.h"
|
|
|
|
#include "drm_atomic_helper.h"
|
|
|
|
#include "drm_crtc_helper.h"
|
|
|
|
#include "linux/clk.h"
|
|
|
|
#include "linux/component.h"
|
|
|
|
#include "linux/of_device.h"
|
|
|
|
#include "vc4_drv.h"
|
|
|
|
#include "vc4_regs.h"
|
|
|
|
|
|
|
|
struct vc4_crtc {
|
|
|
|
struct drm_crtc base;
|
|
|
|
const struct vc4_crtc_data *data;
|
|
|
|
void __iomem *regs;
|
|
|
|
|
|
|
|
/* Which HVS channel we're using for our CRTC. */
|
|
|
|
int channel;
|
|
|
|
|
|
|
|
/* Pointer to the actual hardware display list memory for the
|
|
|
|
* crtc.
|
|
|
|
*/
|
|
|
|
u32 __iomem *dlist;
|
|
|
|
|
|
|
|
u32 dlist_size; /* in dwords */
|
|
|
|
|
|
|
|
struct drm_pending_vblank_event *event;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct vc4_crtc *
|
|
|
|
to_vc4_crtc(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
return (struct vc4_crtc *)crtc;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct vc4_crtc_data {
|
|
|
|
/* Which channel of the HVS this pixelvalve sources from. */
|
|
|
|
int hvs_channel;
|
|
|
|
|
|
|
|
enum vc4_encoder_type encoder0_type;
|
|
|
|
enum vc4_encoder_type encoder1_type;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset))
|
|
|
|
#define CRTC_READ(offset) readl(vc4_crtc->regs + (offset))
|
|
|
|
|
|
|
|
#define CRTC_REG(reg) { reg, #reg }
|
|
|
|
static const struct {
|
|
|
|
u32 reg;
|
|
|
|
const char *name;
|
|
|
|
} crtc_regs[] = {
|
|
|
|
CRTC_REG(PV_CONTROL),
|
|
|
|
CRTC_REG(PV_V_CONTROL),
|
|
|
|
CRTC_REG(PV_VSYNCD),
|
|
|
|
CRTC_REG(PV_HORZA),
|
|
|
|
CRTC_REG(PV_HORZB),
|
|
|
|
CRTC_REG(PV_VERTA),
|
|
|
|
CRTC_REG(PV_VERTB),
|
|
|
|
CRTC_REG(PV_VERTA_EVEN),
|
|
|
|
CRTC_REG(PV_VERTB_EVEN),
|
|
|
|
CRTC_REG(PV_INTEN),
|
|
|
|
CRTC_REG(PV_INTSTAT),
|
|
|
|
CRTC_REG(PV_STAT),
|
|
|
|
CRTC_REG(PV_HACT_ACT),
|
|
|
|
};
|
|
|
|
|
|
|
|
static void vc4_crtc_dump_regs(struct vc4_crtc *vc4_crtc)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) {
|
|
|
|
DRM_INFO("0x%04x (%s): 0x%08x\n",
|
|
|
|
crtc_regs[i].reg, crtc_regs[i].name,
|
|
|
|
CRTC_READ(crtc_regs[i].reg));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
int vc4_crtc_debugfs_regs(struct seq_file *m, void *unused)
|
|
|
|
{
|
|
|
|
struct drm_info_node *node = (struct drm_info_node *)m->private;
|
|
|
|
struct drm_device *dev = node->minor->dev;
|
|
|
|
int crtc_index = (uintptr_t)node->info_ent->data;
|
|
|
|
struct drm_crtc *crtc;
|
|
|
|
struct vc4_crtc *vc4_crtc;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
i = 0;
|
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
|
|
if (i == crtc_index)
|
|
|
|
break;
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
if (!crtc)
|
|
|
|
return 0;
|
|
|
|
vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) {
|
|
|
|
seq_printf(m, "%s (0x%04x): 0x%08x\n",
|
|
|
|
crtc_regs[i].name, crtc_regs[i].reg,
|
|
|
|
CRTC_READ(crtc_regs[i].reg));
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static void vc4_crtc_destroy(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
drm_crtc_cleanup(crtc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32 vc4_get_fifo_full_level(u32 format)
|
|
|
|
{
|
|
|
|
static const u32 fifo_len_bytes = 64;
|
|
|
|
static const u32 hvs_latency_pix = 6;
|
|
|
|
|
|
|
|
switch (format) {
|
|
|
|
case PV_CONTROL_FORMAT_DSIV_16:
|
|
|
|
case PV_CONTROL_FORMAT_DSIC_16:
|
|
|
|
return fifo_len_bytes - 2 * hvs_latency_pix;
|
|
|
|
case PV_CONTROL_FORMAT_DSIV_18:
|
|
|
|
return fifo_len_bytes - 14;
|
|
|
|
case PV_CONTROL_FORMAT_24:
|
|
|
|
case PV_CONTROL_FORMAT_DSIV_24:
|
|
|
|
default:
|
|
|
|
return fifo_len_bytes - 3 * hvs_latency_pix;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Returns the clock select bit for the connector attached to the
|
|
|
|
* CRTC.
|
|
|
|
*/
|
|
|
|
static int vc4_get_clock_select(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct drm_connector *connector;
|
|
|
|
|
|
|
|
drm_for_each_connector(connector, crtc->dev) {
|
2015-10-23 13:38:00 +08:00
|
|
|
if (connector->state->crtc == crtc) {
|
2015-03-03 05:01:12 +08:00
|
|
|
struct drm_encoder *encoder = connector->encoder;
|
|
|
|
struct vc4_encoder *vc4_encoder =
|
|
|
|
to_vc4_encoder(encoder);
|
|
|
|
|
|
|
|
return vc4_encoder->clock_select;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
struct drm_crtc_state *state = crtc->state;
|
|
|
|
struct drm_display_mode *mode = &state->adjusted_mode;
|
|
|
|
bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE;
|
|
|
|
u32 vactive = (mode->vdisplay >> (interlace ? 1 : 0));
|
|
|
|
u32 format = PV_CONTROL_FORMAT_24;
|
|
|
|
bool debug_dump_regs = false;
|
|
|
|
int clock_select = vc4_get_clock_select(crtc);
|
|
|
|
|
|
|
|
if (debug_dump_regs) {
|
|
|
|
DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc));
|
|
|
|
vc4_crtc_dump_regs(vc4_crtc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset the PV fifo. */
|
|
|
|
CRTC_WRITE(PV_CONTROL, 0);
|
|
|
|
CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR | PV_CONTROL_EN);
|
|
|
|
CRTC_WRITE(PV_CONTROL, 0);
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_HORZA,
|
|
|
|
VC4_SET_FIELD(mode->htotal - mode->hsync_end,
|
|
|
|
PV_HORZA_HBP) |
|
|
|
|
VC4_SET_FIELD(mode->hsync_end - mode->hsync_start,
|
|
|
|
PV_HORZA_HSYNC));
|
|
|
|
CRTC_WRITE(PV_HORZB,
|
|
|
|
VC4_SET_FIELD(mode->hsync_start - mode->hdisplay,
|
|
|
|
PV_HORZB_HFP) |
|
|
|
|
VC4_SET_FIELD(mode->hdisplay, PV_HORZB_HACTIVE));
|
|
|
|
|
|
|
|
if (interlace) {
|
|
|
|
CRTC_WRITE(PV_VERTA_EVEN,
|
|
|
|
VC4_SET_FIELD(mode->vtotal - mode->vsync_end - 1,
|
|
|
|
PV_VERTA_VBP) |
|
|
|
|
VC4_SET_FIELD(mode->vsync_end - mode->vsync_start,
|
|
|
|
PV_VERTA_VSYNC));
|
|
|
|
CRTC_WRITE(PV_VERTB_EVEN,
|
|
|
|
VC4_SET_FIELD(mode->vsync_start - mode->vdisplay,
|
|
|
|
PV_VERTB_VFP) |
|
|
|
|
VC4_SET_FIELD(vactive, PV_VERTB_VACTIVE));
|
|
|
|
}
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_HACT_ACT, mode->hdisplay);
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_V_CONTROL,
|
|
|
|
PV_VCONTROL_CONTINUOUS |
|
|
|
|
(interlace ? PV_VCONTROL_INTERLACE : 0));
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_CONTROL,
|
|
|
|
VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
|
|
|
|
VC4_SET_FIELD(vc4_get_fifo_full_level(format),
|
|
|
|
PV_CONTROL_FIFO_LEVEL) |
|
|
|
|
PV_CONTROL_CLR_AT_START |
|
|
|
|
PV_CONTROL_TRIGGER_UNDERFLOW |
|
|
|
|
PV_CONTROL_WAIT_HSTART |
|
|
|
|
VC4_SET_FIELD(clock_select, PV_CONTROL_CLK_SELECT) |
|
|
|
|
PV_CONTROL_FIFO_CLR |
|
|
|
|
PV_CONTROL_EN);
|
|
|
|
|
|
|
|
if (debug_dump_regs) {
|
|
|
|
DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc));
|
|
|
|
vc4_crtc_dump_regs(vc4_crtc);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void require_hvs_enabled(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
|
|
|
|
|
|
|
WARN_ON_ONCE((HVS_READ(SCALER_DISPCTRL) & SCALER_DISPCTRL_ENABLE) !=
|
|
|
|
SCALER_DISPCTRL_ENABLE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void vc4_crtc_disable(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
|
|
|
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
u32 chan = vc4_crtc->channel;
|
|
|
|
int ret;
|
|
|
|
require_hvs_enabled(dev);
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_V_CONTROL,
|
|
|
|
CRTC_READ(PV_V_CONTROL) & ~PV_VCONTROL_VIDEN);
|
|
|
|
ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1);
|
|
|
|
WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n");
|
|
|
|
|
|
|
|
if (HVS_READ(SCALER_DISPCTRLX(chan)) &
|
|
|
|
SCALER_DISPCTRLX_ENABLE) {
|
|
|
|
HVS_WRITE(SCALER_DISPCTRLX(chan),
|
|
|
|
SCALER_DISPCTRLX_RESET);
|
|
|
|
|
|
|
|
/* While the docs say that reset is self-clearing, it
|
|
|
|
* seems it doesn't actually.
|
|
|
|
*/
|
|
|
|
HVS_WRITE(SCALER_DISPCTRLX(chan), 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Once we leave, the scaler should be disabled and its fifo empty. */
|
|
|
|
|
|
|
|
WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET);
|
|
|
|
|
|
|
|
WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)),
|
|
|
|
SCALER_DISPSTATX_MODE) !=
|
|
|
|
SCALER_DISPSTATX_MODE_DISABLED);
|
|
|
|
|
|
|
|
WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) &
|
|
|
|
(SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) !=
|
|
|
|
SCALER_DISPSTATX_EMPTY);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void vc4_crtc_enable(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
|
|
|
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
struct drm_crtc_state *state = crtc->state;
|
|
|
|
struct drm_display_mode *mode = &state->adjusted_mode;
|
|
|
|
|
|
|
|
require_hvs_enabled(dev);
|
|
|
|
|
|
|
|
/* Turn on the scaler, which will wait for vstart to start
|
|
|
|
* compositing.
|
|
|
|
*/
|
|
|
|
HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel),
|
|
|
|
VC4_SET_FIELD(mode->hdisplay, SCALER_DISPCTRLX_WIDTH) |
|
|
|
|
VC4_SET_FIELD(mode->vdisplay, SCALER_DISPCTRLX_HEIGHT) |
|
|
|
|
SCALER_DISPCTRLX_ENABLE);
|
|
|
|
|
|
|
|
/* Turn on the pixel valve, which will emit the vstart signal. */
|
|
|
|
CRTC_WRITE(PV_V_CONTROL,
|
|
|
|
CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
|
|
|
|
struct drm_crtc_state *state)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
|
|
|
struct drm_plane *plane;
|
|
|
|
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
u32 dlist_count = 0;
|
|
|
|
|
|
|
|
/* The pixelvalve can only feed one encoder (and encoders are
|
|
|
|
* 1:1 with connectors.)
|
|
|
|
*/
|
|
|
|
if (drm_atomic_connectors_for_crtc(state->state, crtc) > 1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
drm_atomic_crtc_state_for_each_plane(plane, state) {
|
|
|
|
struct drm_plane_state *plane_state =
|
|
|
|
state->state->plane_states[drm_plane_index(plane)];
|
|
|
|
|
|
|
|
/* plane might not have changed, in which case take
|
|
|
|
* current state:
|
|
|
|
*/
|
|
|
|
if (!plane_state)
|
|
|
|
plane_state = plane->state;
|
|
|
|
|
|
|
|
dlist_count += vc4_plane_dlist_size(plane_state);
|
|
|
|
}
|
|
|
|
|
|
|
|
dlist_count++; /* Account for SCALER_CTL0_END. */
|
|
|
|
|
|
|
|
if (!vc4_crtc->dlist || dlist_count > vc4_crtc->dlist_size) {
|
|
|
|
vc4_crtc->dlist = ((u32 __iomem *)vc4->hvs->dlist +
|
|
|
|
HVS_BOOTLOADER_DLIST_END);
|
|
|
|
vc4_crtc->dlist_size = ((SCALER_DLIST_SIZE >> 2) -
|
|
|
|
HVS_BOOTLOADER_DLIST_END);
|
|
|
|
|
|
|
|
if (dlist_count > vc4_crtc->dlist_size) {
|
|
|
|
DRM_DEBUG_KMS("dlist too large for CRTC (%d > %d).\n",
|
|
|
|
dlist_count, vc4_crtc->dlist_size);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
|
|
|
|
struct drm_crtc_state *old_state)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
|
|
|
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
struct drm_plane *plane;
|
|
|
|
bool debug_dump_regs = false;
|
|
|
|
u32 __iomem *dlist_next = vc4_crtc->dlist;
|
|
|
|
|
|
|
|
if (debug_dump_regs) {
|
|
|
|
DRM_INFO("CRTC %d HVS before:\n", drm_crtc_index(crtc));
|
|
|
|
vc4_hvs_dump_state(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Copy all the active planes' dlist contents to the hardware dlist.
|
|
|
|
*
|
|
|
|
* XXX: If the new display list was large enough that it
|
|
|
|
* overlapped a currently-read display list, we need to do
|
|
|
|
* something like disable scanout before putting in the new
|
|
|
|
* list. For now, we're safe because we only have the two
|
|
|
|
* planes.
|
|
|
|
*/
|
|
|
|
drm_atomic_crtc_for_each_plane(plane, crtc) {
|
|
|
|
dlist_next += vc4_plane_write_dlist(plane, dlist_next);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dlist_next == vc4_crtc->dlist) {
|
|
|
|
/* If no planes were enabled, use the SCALER_CTL0_END
|
|
|
|
* at the start of the display list memory (in the
|
|
|
|
* bootloader section). We'll rewrite that
|
|
|
|
* SCALER_CTL0_END, just in case, though.
|
|
|
|
*/
|
|
|
|
writel(SCALER_CTL0_END, vc4->hvs->dlist);
|
|
|
|
HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), 0);
|
|
|
|
} else {
|
|
|
|
writel(SCALER_CTL0_END, dlist_next);
|
|
|
|
dlist_next++;
|
|
|
|
|
|
|
|
HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
|
2015-10-23 17:24:11 +08:00
|
|
|
(u32 __iomem *)vc4_crtc->dlist -
|
|
|
|
(u32 __iomem *)vc4->hvs->dlist);
|
2015-03-03 05:01:12 +08:00
|
|
|
|
|
|
|
/* Make the next display list start after ours. */
|
|
|
|
vc4_crtc->dlist_size -= (dlist_next - vc4_crtc->dlist);
|
|
|
|
vc4_crtc->dlist = dlist_next;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (debug_dump_regs) {
|
|
|
|
DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
|
|
|
|
vc4_hvs_dump_state(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (crtc->state->event) {
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
crtc->state->event->pipe = drm_crtc_index(crtc);
|
|
|
|
|
|
|
|
WARN_ON(drm_crtc_vblank_get(crtc) != 0);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
|
|
vc4_crtc->event = crtc->state->event;
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
crtc->state->event = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-10-22 08:23:31 +08:00
|
|
|
int vc4_enable_vblank(struct drm_device *dev, unsigned int crtc_id)
|
2015-03-03 05:01:12 +08:00
|
|
|
{
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
|
|
|
struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_INTEN, PV_INT_VFP_START);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-10-22 08:23:31 +08:00
|
|
|
void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id)
|
2015-03-03 05:01:12 +08:00
|
|
|
{
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
|
|
|
struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_INTEN, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
|
|
|
|
{
|
|
|
|
struct drm_crtc *crtc = &vc4_crtc->base;
|
|
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
|
|
if (vc4_crtc->event) {
|
|
|
|
drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
|
|
|
|
vc4_crtc->event = NULL;
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t vc4_crtc_irq_handler(int irq, void *data)
|
|
|
|
{
|
|
|
|
struct vc4_crtc *vc4_crtc = data;
|
|
|
|
u32 stat = CRTC_READ(PV_INTSTAT);
|
|
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
|
|
|
|
if (stat & PV_INT_VFP_START) {
|
|
|
|
CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
|
|
|
|
drm_crtc_handle_vblank(&vc4_crtc->base);
|
|
|
|
vc4_crtc_handle_page_flip(vc4_crtc);
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct drm_crtc_funcs vc4_crtc_funcs = {
|
|
|
|
.set_config = drm_atomic_helper_set_config,
|
|
|
|
.destroy = vc4_crtc_destroy,
|
|
|
|
.page_flip = drm_atomic_helper_page_flip,
|
|
|
|
.set_property = NULL,
|
|
|
|
.cursor_set = NULL, /* handled by drm_mode_cursor_universal */
|
|
|
|
.cursor_move = NULL, /* handled by drm_mode_cursor_universal */
|
|
|
|
.reset = drm_atomic_helper_crtc_reset,
|
|
|
|
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
|
|
|
|
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
|
|
|
|
.mode_set_nofb = vc4_crtc_mode_set_nofb,
|
|
|
|
.disable = vc4_crtc_disable,
|
|
|
|
.enable = vc4_crtc_enable,
|
|
|
|
.atomic_check = vc4_crtc_atomic_check,
|
|
|
|
.atomic_flush = vc4_crtc_atomic_flush,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Frees the page flip event when the DRM device is closed with the
|
|
|
|
* event still outstanding.
|
|
|
|
*/
|
|
|
|
void vc4_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
|
|
|
|
{
|
|
|
|
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
|
|
|
|
|
|
if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) {
|
|
|
|
vc4_crtc->event->base.destroy(&vc4_crtc->event->base);
|
|
|
|
drm_crtc_vblank_put(crtc);
|
|
|
|
vc4_crtc->event = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct vc4_crtc_data pv0_data = {
|
|
|
|
.hvs_channel = 0,
|
|
|
|
.encoder0_type = VC4_ENCODER_TYPE_DSI0,
|
|
|
|
.encoder1_type = VC4_ENCODER_TYPE_DPI,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct vc4_crtc_data pv1_data = {
|
|
|
|
.hvs_channel = 2,
|
|
|
|
.encoder0_type = VC4_ENCODER_TYPE_DSI1,
|
|
|
|
.encoder1_type = VC4_ENCODER_TYPE_SMI,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct vc4_crtc_data pv2_data = {
|
|
|
|
.hvs_channel = 1,
|
|
|
|
.encoder0_type = VC4_ENCODER_TYPE_VEC,
|
|
|
|
.encoder1_type = VC4_ENCODER_TYPE_HDMI,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct of_device_id vc4_crtc_dt_match[] = {
|
|
|
|
{ .compatible = "brcm,bcm2835-pixelvalve0", .data = &pv0_data },
|
|
|
|
{ .compatible = "brcm,bcm2835-pixelvalve1", .data = &pv1_data },
|
|
|
|
{ .compatible = "brcm,bcm2835-pixelvalve2", .data = &pv2_data },
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
|
|
|
static void vc4_set_crtc_possible_masks(struct drm_device *drm,
|
|
|
|
struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
|
|
|
|
struct drm_encoder *encoder;
|
|
|
|
|
|
|
|
drm_for_each_encoder(encoder, drm) {
|
|
|
|
struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder);
|
|
|
|
|
|
|
|
if (vc4_encoder->type == vc4_crtc->data->encoder0_type) {
|
|
|
|
vc4_encoder->clock_select = 0;
|
|
|
|
encoder->possible_crtcs |= drm_crtc_mask(crtc);
|
|
|
|
} else if (vc4_encoder->type == vc4_crtc->data->encoder1_type) {
|
|
|
|
vc4_encoder->clock_select = 1;
|
|
|
|
encoder->possible_crtcs |= drm_crtc_mask(crtc);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
struct drm_device *drm = dev_get_drvdata(master);
|
|
|
|
struct vc4_dev *vc4 = to_vc4_dev(drm);
|
|
|
|
struct vc4_crtc *vc4_crtc;
|
|
|
|
struct drm_crtc *crtc;
|
|
|
|
struct drm_plane *primary_plane, *cursor_plane;
|
|
|
|
const struct of_device_id *match;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL);
|
|
|
|
if (!vc4_crtc)
|
|
|
|
return -ENOMEM;
|
|
|
|
crtc = &vc4_crtc->base;
|
|
|
|
|
|
|
|
match = of_match_device(vc4_crtc_dt_match, dev);
|
|
|
|
if (!match)
|
|
|
|
return -ENODEV;
|
|
|
|
vc4_crtc->data = match->data;
|
|
|
|
|
|
|
|
vc4_crtc->regs = vc4_ioremap_regs(pdev, 0);
|
|
|
|
if (IS_ERR(vc4_crtc->regs))
|
|
|
|
return PTR_ERR(vc4_crtc->regs);
|
|
|
|
|
|
|
|
/* For now, we create just the primary and the legacy cursor
|
|
|
|
* planes. We should be able to stack more planes on easily,
|
|
|
|
* but to do that we would need to compute the bandwidth
|
|
|
|
* requirement of the plane configuration, and reject ones
|
|
|
|
* that will take too much.
|
|
|
|
*/
|
|
|
|
primary_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_PRIMARY);
|
2015-11-04 21:21:40 +08:00
|
|
|
if (IS_ERR(primary_plane)) {
|
2015-03-03 05:01:12 +08:00
|
|
|
dev_err(dev, "failed to construct primary plane\n");
|
|
|
|
ret = PTR_ERR(primary_plane);
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR);
|
2015-11-04 21:21:40 +08:00
|
|
|
if (IS_ERR(cursor_plane)) {
|
2015-03-03 05:01:12 +08:00
|
|
|
dev_err(dev, "failed to construct cursor plane\n");
|
|
|
|
ret = PTR_ERR(cursor_plane);
|
|
|
|
goto err_primary;
|
|
|
|
}
|
|
|
|
|
|
|
|
drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane,
|
|
|
|
&vc4_crtc_funcs);
|
|
|
|
drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
|
|
|
|
primary_plane->crtc = crtc;
|
|
|
|
cursor_plane->crtc = crtc;
|
|
|
|
vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc;
|
|
|
|
vc4_crtc->channel = vc4_crtc->data->hvs_channel;
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_INTEN, 0);
|
|
|
|
CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
|
|
|
|
ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
|
|
|
|
vc4_crtc_irq_handler, 0, "vc4 crtc", vc4_crtc);
|
|
|
|
if (ret)
|
|
|
|
goto err_cursor;
|
|
|
|
|
|
|
|
vc4_set_crtc_possible_masks(drm, crtc);
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, vc4_crtc);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_cursor:
|
|
|
|
cursor_plane->funcs->destroy(cursor_plane);
|
|
|
|
err_primary:
|
|
|
|
primary_plane->funcs->destroy(primary_plane);
|
|
|
|
err:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void vc4_crtc_unbind(struct device *dev, struct device *master,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
vc4_crtc_destroy(&vc4_crtc->base);
|
|
|
|
|
|
|
|
CRTC_WRITE(PV_INTEN, 0);
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct component_ops vc4_crtc_ops = {
|
|
|
|
.bind = vc4_crtc_bind,
|
|
|
|
.unbind = vc4_crtc_unbind,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int vc4_crtc_dev_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
return component_add(&pdev->dev, &vc4_crtc_ops);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vc4_crtc_dev_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
component_del(&pdev->dev, &vc4_crtc_ops);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct platform_driver vc4_crtc_driver = {
|
|
|
|
.probe = vc4_crtc_dev_probe,
|
|
|
|
.remove = vc4_crtc_dev_remove,
|
|
|
|
.driver = {
|
|
|
|
.name = "vc4_crtc",
|
|
|
|
.of_match_table = vc4_crtc_dt_match,
|
|
|
|
},
|
|
|
|
};
|